05-51-11 DVI 10000-003

INSPECTION AFTER FLIGHT

IN TURBULENCE AND/OR
EXCEEDING VMO/MMO 1 SEP19

ZONING DATA
___________

ZONE : 200 210

300
500
600

PREPARATION
___________

PROVISION

WORK : SKILL
_____ ___
MEN _________
MAN-HOURS

ELAPSED TIME :

GSE : 01 ACCESS PLATFORM

PUBLICATION
___________

JIC : EXTERNAL CLEANING 12-21-11-CLN-10000

JIC : INTERNAL CLEANING 12-21-12-CLN-10000
JIC : DVI IN WING ATTACH 53-51-00-DVI-10000
FITTING SURROUNDING AREA
JIC : DVI ON INTERNAL SURFACE 53-51-00-DVI-10005
OF THE WING ATTACH
FITTINGS AT FR 25 AND 27
JIC : VISUAL INSPECTION OF 57-15-10-DVI-10000
SHEAR WEB AT RIB 2
JIC : MEASUREMENT 05-56-00-MSN-10000
JIC : FUNCTIONAL CHECK OF 27-50-00-FUT-10000
FLAP CONTROL
JIC : DVI ON WING SUPPORT 53-51-00-DVI-10010
FITTING
JIC : DVI ON UPPER LUG AREA 53-51-00-DVI-10020
(WING ATTACHMENT)

ALX 05-51-11
DVI 10000-003
2-400 PAGE 1
SEP 01/19
 05-51-11 DVI 10000-003
INSPECTION AFTER FLIGHT
IN TURBULENCE AND/OR
EXCEEDING VMO/MMO 2 SEP19

PUBLICATION
___________

JIC : VISUAL INSPECTION OF 57-15-10-DVI-10010

AFT WING-TO-FUSELAGE
JUNCTION AT RIB 2
JIC : VISUAL INSPECTION OF 57-15-10-DVI-10020
FORWARD WING-TO-FUSELAGE
JUNCTION AT RIB 2
JIC : VISUAL INSPECTION OF 57-15-21-DVI-10000
AFT WING-TO-FUSELAGE
JUNCTION AT RIB 4
JIC : VISUAL INSPECTION OF 57-15-22-DVI-10000
FORWARD WING-TO-FUSELAGE
JUNCTION AT RIB 4
JIC : DETAILED VISUAL INSPEC- 57-22-20-DVI-10000
TION OF REAR SPAR
FITTINGS
JIC : DETAILED VISUAL INSPEC- 57-24-00-DVI-10000
TION OF LOWER SKIN
BETWEEN RIBS 13 AND 14
JIC : DETAILED VISUAL 57-24-10-DVI-10000
INSPECTION OF UPPER SKIN
PANELS OF WING OUTER BOX
JIC : DETAILED VISUAL 57-24-20-DVI-10000
INSPECTION OF LOWER SKIN
PANELS OF WING OUTER BOX
JIC : DETAILED VISUAL 54-11-61-DVI-10000
INSPECTION OF FORWARD
ENGINE MOUNT
JIC : DETAILED VISUAL 54-21-61-DVI-10000
INSPECTION OF AFT ENGINE
MOUNT
JIC : JACKING UP AND DOWN OF 07-11-00-JUP-10000
AIRCRAFT FOR MAINTENANCE
OPERATION
JIC : NORMAL EXTENSION AND 32-31-00-FUT-10000
RETRACTION FUNCTIONAL
TEST
JIC : EMER EXTENSION 32-33-00-FUT-10000
FUNCTIONAL TEST

ALX 05-51-11
DVI 10000-003
2-400 PAGE 2
SEP 01/19
 05-51-11 DVI 10000-003
INSPECTION AFTER FLIGHT
IN TURBULENCE AND/OR
EXCEEDING VMO/MMO 3 SEP19

001 _
_______________________________________________
_
_
_______________________________________________
+++++ PART 1 +++++ _
_
_______________________________________________
DEFINITION _

PERFORM THE FOLLOWING OPERATIONS:

002 _________
PROCEDURE

REF. FIG. 055111-DVI-00100

IN CASE OF EXCESSIVE TURBULENCE, MANEUVERING

OR EXCEEDING VMO/MMO, THE AIRCRAFT CAN
EXPERIENCE HIGH VALUES OF LOAD FACTOR AND
EXCEED THE LIMIT LOAD.
IF THIS IS THE CASE, VISUAL INSPECTIONS FOR
STRUCTURAL DAMAGE MIGHT BE REQUIRED BEFORE
RETURNING THE AIRCRAFT INTO SERVICE.

THE FLOW DIAGRAM SHOWS THE PROCEDURE

TO FOLLOW TO DETERMINE WHETHER INSPECTIONS MUST
BE CARRIED OUT IN CASE OF ONE OF THESE EVENTS
(OR A COMBINATION OF THEM) OCCURS.

NOTE 1: THESE EVENTS MAY BE REPORTED BY THE

FLIGHT CREW AND CONFIRMED BY THE
G-METER REPORT. CONTACT ATR IN CASE OF
FREQUENT OCCURRENCE OF VMO/MMO
EXCEEDANCE.

NOTE 2: IN CASE OF EXCEEDING VMO/MMO WHILE

SEVERE LATERAL TURBULENCE IS
EXPERIENCED AND/OR LATERAL MANEUVERING
IS PERFORMED, CONTACT ATR EVEN THE
VMO/MMO IS WITHIN THE TOLERANCE RANGE
SHOWN IN THE FLOW DIAGRAM.

003 _______
CAUTION

REF. FIG. 055111-DVI-00100

IN CASE OF EXCESSIVE TURBULENCE, MANEUVERING

*** CONTINUED ***

ALX 05-51-11
DVI 10000-003
2-400 PAGE 3
SEP 01/19
 05-51-11 DVI 10000-003
INSPECTION AFTER FLIGHT
IN TURBULENCE AND/OR
EXCEEDING VMO/MMO 4 SEP19

OR EXCEEDING VMO/MMO (ACCORDING TO THE FLOW

DIAGRAM) THE AIRCRAFT MUST BE INSPECTED IN
ORDER TO DETECT ANY RESULTING STRUCTURAL
DAMAGE.

A RESTRICTED INSPECTION (PART 3) NEEDS TO BE

CARRIED OUT. IF NO ANOMALIES ARE FOUND, THE
AIRCRAFT IS RELEASED TO SERVICE, OTHERWISE AN
EXTENDED INSPECTION (PART 4) NEEDS TO BE DONE.

004 _
_______________________________________________
_
_
_______________________________________________
+++++ PART 2 +++++ _
_
_______________________________________________
PREPARATION _

PERFORM THE FOLLOWING OPERATIONS:

005 ___________
PREPARATION

1. IN FLIGHT COMPARTMENT DISPLAY WARNING

NOTICES PROHIBITING OPERATION OF CONTROLS
AND HYDRAULIC, ELECTRIC AND ELECTRONIC
SYSTEMS.

2. POSITION ACCESS PLATFORMS AS NECESSARY FOR

THE INSPECTION.

006 _________________
EXTERNAL CLEANING

SEE JOB INSTRUCTION CARD

122111-CLN-10000

007 _________________
INTERNAL CLEANING

SEE JOB INSTRUCTION CARD

122112-CLN-10000

008 _
_______________________________________________
_
_
_______________________________________________
+++++ PART 3 +++++ _
_
_______________________________________________
RESTRICTED INSPECTION _

PERFORM THE FOLLOWING OPERATIONS:

*** CONTINUED ***

ALX 05-51-11
DVI 10000-003
2-400 PAGE 4
SEP 01/19
 05-51-11 DVI 10000-003
INSPECTION AFTER FLIGHT
IN TURBULENCE AND/OR
EXCEEDING VMO/MMO 5 SEP19

009 _________________________
GENERAL VISUAL INSPECTION

REF. FIG. 055110-DVI-00100

REF. FIG. 055110-DVI-00120

1. MAKE A GENERAL VISUAL INSPECTION OF THE

FOLLOWING ZONES:

A. WINGS: ZONES 500-600

(1) CHECK THAT CENTER WING UPPER SURFACE
SKIN PANELS ARE FREE FROM WRINKLING.

(2) CHECK FOR LOOSE SCREWS (1) AND RIVETS

(2) ESPECIALLY AT NACELLES AND AT
RIB 13.

(3) CHECK THAT WING-TO-FUSELAGE FAIRINGS

(3) ARE NOT DAMAGED.

(4) CHECK LOWER SURFACES OF WINGS FOR

NO FUEL LEAKS.

B. FUSELAGE: ZONES 200-300

(1) CHECK THAT ALL SKIN PANELS ARE FREE
FROM CRACKS AND DEFORMATION,
ESPECIALLY AT FUSELAGE UPPER SECTION
LEVEL (4).

(2) CHECK FOR LOOSE RIVETS (5) AT

LONGITUDINAL PANEL JUNCTION LINES,
PAY SPECIAL ATTENTION TO ZONE AFT OF
BULKHEAD (6), FLOORS AND BULKHEAD
AT LANDING GEAR WELL.

C. STABILIZERS: ZONE 300

(1) CHECK THAT SKIN PANELS ARE FREE FROM
WRINKLING AND LOOSE RIVETS.

(2) CHECK THAT FAIRINGS (7) ARE NOT

DAMAGED, ESPECIALLY AT HORIZONTAL
STABILIZER-TO-VERTICAL STABILIZER

*** CONTINUED ***

ALX 05-51-11
DVI 10000-003
2-400 PAGE 5
SEP 01/19
 05-51-11 DVI 10000-003
INSPECTION AFTER FLIGHT
IN TURBULENCE AND/OR
EXCEEDING VMO/MMO 6 SEP19

AND VERTICAL STABILIZER-TO-FUSELAGE

ATTACHMENTS (FR45 AND FR46).

D. CONTROL SURFACES: ZONES 300-500-600

(1) CHECK OPERATION OF ALL CONTROL
SURFACES (13) AND THEIR CONTROLS.

(2) CHECK FOR FRICTION AND JAMMING OVER

FULL TRAVEL RANGE OF CONTROL SURFACES
(13).

010 DETAILED VISUAL INSPECTION OF WING ATTACH

_________________________________________
FITTING SURROUNDING AREA
________________________

SEE JOB INSTRUCTION CARD

535100-DVI-10000

011 DVI ON INTERNAL SURFACE OF THE WING ATTACH

__________________________________________
FITTINGS AT FR 25 AND 27
________________________

SEE JOB INSTRUCTION CARD

535100-DVI-10005

012 _______________________________________
VISUAL INSPECTION OF SHEAR WEB AT RIB 2

SEE JOB INSTRUCTION CARD

571510-DVI-10000

013 _
_______________________________________________
_
_
_______________________________________________
+++++ PART 4 +++++ _
_
_______________________________________________
EXTENDED INSPECTION _

PERFORM THE FOLLOWING OPERATIONS:

014 ___________
MEASUREMENT

SEE JOB INSTRUCTION CARD

055600-MSN-10000

*** CONTINUED ***

ALX 05-51-11
DVI 10000-003
2-400 PAGE 6
SEP 01/19
 05-51-11 DVI 10000-003
INSPECTION AFTER FLIGHT
IN TURBULENCE AND/OR
EXCEEDING VMO/MMO 7 SEP19

015 ____________________________________
DETAILED VISUAL INSPECTION (GENERAL)

1. ANALYZE RESULTS OF AIRCRAFT MEASUREMENT BY

CHECKING SYMMETRIES AND COMPARING WITH
VALUES GIVEN IN CONCERNED JIC (SEE
055600-MSN-10000) AND WITH PREVIOUS
MEASUREMENTS OF THE SAME AIRCRAFT (IF ANY).

2. ANALYZE THE DISTORTED SECTION IN MORE

DETAILS.

3. PERFORM A DETAILED INSPECTION OF THE

AIRCRAFT IN ORDER TO DETECT ANY SHEARED OR
DEFORMED CONNECTING PARTS, LOCAL BUCKLING,
CRACKS ON SKIN PANEL OR FRACTURE OF
COMPONENTS IN ZONES GIVEN BELOW:

- WINGS
- STABILIZER
- NACELLES
- FUSELAGE
- EQUIPMENT/FURNISHING
- LANDING GEARS

4. PERFORM THE NON-DESTRUCTIVE TESTS DESCRIBED

IN THE NDTM (NON DESTRUCTIVE TESTING MANUAL)
CORRESPONDING TO THE AREAS TO BE INSPECTED.

016 _______________________________
DETAILED INSPECTION OF THE WING

1. MANUALLY CHECK AILERON PLAY FOR FRICTION

OR HARD POINTS OVER FULL TRAVEL RANGE.

2. MANUALLY CHECK FLAP PLAY.

017 ________________________________
FUNCTIONAL CHECK OF FLAP CONTROL

SEE JOB INSTRUCTION CARD

275000-FUT-10000

*** CONTINUED ***

ALX 05-51-11
DVI 10000-003
2-400 PAGE 7
SEP 01/19
 05-51-11 DVI 10000-003
INSPECTION AFTER FLIGHT
IN TURBULENCE AND/OR
EXCEEDING VMO/MMO 8 SEP19

018 ___________________________
DVI ON WING SUPPORT FITTING

SEE JOB INSTRUCTION CARD

535100-DVI-10010

019 _______________________________________
DVI ON UPPER LUG AREA (WING ATTACHMENT)

SEE JOB INSTRUCTION CARD

535100-DVI-10020

020 VISUAL INSPECTION OF AFT WING-TO-FUSELAGE

_________________________________________
JUNCTION AT RIB 2
_________________

SEE JOB INSTRUCTION CARD

571510-DVI-10010

021 VISUAL INSPECTION OF FORWARD WING-TO-FUSELAGE

_____________________________________________
JUNCTION AT RIB 2
_________________

SEE JOB INSTRUCTION CARD

571510-DVI-10020

022 VISUAL INSPECTION OF AFT WING-TO-FUSELAGE

_________________________________________
JUNCTION AT RIB 4
_________________

SEE JOB INSTRUCTION CARD

571521-DVI-10000

023 VISUAL INSPECTION OF FORWARD WING-TO-FUSELAGE

_____________________________________________
JUNCTION AT RIB 4
_________________

SEE JOB INSTRUCTION CARD

571522-DVI-10000

024 VISUAL INSPECTION OF WING-TO-FUSELAGE JUNCTION

______________________________________________
ROD PICK-UP FITTINGS AT FR25 AND FR27
_____________________________________

PERFORM A VISUAL INSPECTION OF THE WING-TO-

FUSELAGE JUNCTION ROD PICK-UP FITTINGS AT FR25
AND FR27 AND OF ADJACENT AREA, INSIDE AND
OUTSIDE THE AIRCRAFT (SKIN AND FRAMES).

*** CONTINUED ***

ALX 05-51-11
DVI 10000-003
2-400 PAGE 8
SEP 01/19
 05-51-11 DVI 10000-003
INSPECTION AFTER FLIGHT
IN TURBULENCE AND/OR
EXCEEDING VMO/MMO 9 SEP19

025 DETAILED VISUAL INSPECTION OF REAR SPAR

_______________________________________
FITTINGS
________

SEE JOB INSTRUCTION CARD

572220-DVI-10000

026 DETAILED VISUAL INSPECTION OF LOWER SKIN

________________________________________
BETWEEN RIB 13 AND RIB 14
_________________________

SEE JOB INSTRUCTION CARD

572400-DVI-10000

027 DETAILED VISUAL INSPECTION OF UPPER SKIN

________________________________________
PANELS OF WING UPPER BOX
________________________

SEE JOB INSTRUCTION CARD

572410-DVI-10000

028 DETAILED VISUAL INSPECTION OF LOWER SKIN

________________________________________
PANELS OF WING OUTER BOX
________________________

SEE JOB INSTRUCTION CARD

572420-DVI-10000

029 ______________________________________
DETAILED INSPECTION OF THE STABILIZERS

1. PERFORM DETAILED VISUAL INSPECTION OF

STABILIZER STRUCTURES ESPECIALLY AT FUSELAGE
ATTACHMENT POINTS.

2. CHECK FOR CORRECT OPERATION OF THE CONTROL

SURFACES AND THAT THERE IS NEITHER FRICTION
NOR HARD POINT. MANUALLY CHECK FOR PLAY IN
THE CONTROL BEARINGS AND LINKS AND FOR
CORRECT ALIGNMENT.

030 _______________________________
DETAILED INSPECTION OF NACELLES

REF. FIG. 055110-DVI-00100

1. CHECK CONDITION OF COWLS AND FAIRINGS.

*** CONTINUED ***

ALX 05-51-11
DVI 10000-003
2-400 PAGE 9
SEP 01/19
 05-51-11 DVI 10000-003
INSPECTION AFTER FLIGHT
IN TURBULENCE AND/OR
EXCEEDING VMO/MMO 10 SEP19

2. CHECK UNDER WING BOX (14) AND UNDER WING

BOX-TO-WING JUNCTION.

031 DETAILED VISUAL INSPECTION OF FORWARD ENGINE

____________________________________________
MOUNT
_____

SEE JOB INSTRUCTION CARD

541161-DVI-10000

CHECK CONDITION OF ENGINE ATTACH FITTINGS

(SHOCK MOUNTS, INTERMEDIATE FRAME PICK-UP
FITTINGS).

032 DETAILED VISUAL INSPECTION OF AFT ENGINE

________________________________________
MOUNT
_____

SEE JOB INSTRUCTION CARD

542161-DVI-10000

CHECK WING-TO-FUSELAGE MOUNT ATTACH FITTINGS

AND CHECK THEIR GEOMETRY.

033 _______________________________
DETAILED INSPECTION OF FUSELAGE

REF. FIG. 055110-DVI-00120

1. CHECK THE MAIN LANDING GEAR FAIRINGS.

2. CHECK FOR WRINKLING, LOOSE RIVETS AND CRACKS

ESPECIALLY AT LEVEL OF FUSELAGE UPPER
SECTION AND ALL SKIN PANEL LONGITUDINAL
JUNCTIONS AT LEVEL OF MAIN FRAMES (15).

3. VISUALLY CHECK THE STRUCTURAL INTEGRITY OF

FORWARD AND REAR PRESSURE BULKHEADS.

4. VISUALLY CHECK CONDITION OF PASSENGER

COMPARTMENT FLOOR PANELS.

*** CONTINUED ***

ALX 05-51-11
DVI 10000-003
2-400 PAGE 10
SEP 01/19
 05-51-11 DVI 10000-003
INSPECTION AFTER FLIGHT
IN TURBULENCE AND/OR
EXCEEDING VMO/MMO 11 SEP19

034 ____________________________________________
DETAILED INSPECTION OF EQUIPMENT/FURNISHINGS

CHECK ATTACHMENT OF EMERGENCY EQUIPMENT AND

CAPTAIN, FIRST OFFICER AND PASSENGER SEATS.

035 ______________________
JACKING UP OF AIRCRAFT

SEE JOB INSTRUCTION CARD

071100-JUP-10000

036 ________________________
NORMAL RETRACTION OF L/G

SEE JOB INSTRUCTION CARD

323100-FUT-10000

037 _____________________________________
FUNCTIONAL TEST OF L/G EMER EXTENSION

SEE JOB INSTRUCTION CARD

323300-FUT-10000

038 _______________________
NORMAL EXTENSION OF L/G

SEE JOB INSTRUCTION CARD

323100-FUT-10000

039 ____________________________________
LOWERING OF AIRCRAFT ONTO ITS WHEELS

SEE JOB INSTRUCTION CARD

071100-JUP-10000

040 _
_______________________________________________
_
_
_______________________________________________
+++++ PART 5 +++++ _
_
_______________________________________________
CLOSE-UP _

PERFORM THE FOLLOWING OPERATIONS:

041 ________
CLOSE-UP

1. MAKE SURE THAT WORKING AREA IS CLEAN AND

CLEAR OF TOOLS AND MISCELLANEOUS ITEMS OF
EQUIPMENT.

*** CONTINUED ***

ALX 05-51-11
DVI 10000-003
2-400 PAGE 11
SEP 01/19
 05-51-11 DVI 10000-003
INSPECTION AFTER FLIGHT
IN TURBULENCE AND/OR
EXCEEDING VMO/MMO 12 SEP19

2. REMOVE ACCESS PLATFORM(S).

3. REMOVE WARNING NOTICE(S).

4. RESTORE AIRCRAFT TO ITS NORMAL

CONFIGURATION.

***** E N D O F T E X T *****

ALX 05-51-11
DVI 10000-003
2-400 PAGE 12
SEP 01/19
 05-51-11 DVI 10000-003
13 SEP19

ALX GENERAL INSPECTION OF

STRUCTURE
05-51-11
DVI 10000-003
2-400 PAGE 13
SEP 01/19
 05-51-11 DVI 10000-003
14 SEP19

ALX FLIGHT CONTROL SURFACES

AND UPPER FUSELAGE
05-51-11
DVI 10000-003
2-400 PAGE 14
SEP 01/19
 05-51-11 DVI 10000-003
15 SEP19

ALX FLOW DIAGRAM TO KNOW

WHETHER INSPECTIONS MUST
05-51-11
DVI 10000-003
BE CARRIED OUT 2-400 PAGE 15
SEP 01/19