Scribd Logo
Upload

Welcome to Scribd!

  • 43 views

    05 54 00 Pro 10000 001

    Uploaded by

    Jhony Bhat
    This document provides instructions for demagnetizing the external parts of an aircraft airframe. It involves preparing the aircraft by shutting down engines and de-energizing power systems. Magnetic areas are then identified and demagnetized using a gaussmeter and demagnetizer. The gaussmeter checks that demagnetization was successful by readings of 0. Removed equipment is then reinstalled and power systems are re-energized.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    05 54 00 Pro 10000 001

    Uploaded by

    Jhony Bhat
    43 views3 pages
    This document provides instructions for demagnetizing the external parts of an aircraft airframe. It involves preparing the aircraft by shutting down engines and de-energizing power systems. Magnetic areas are then identified and demagnetized using a gaussmeter and demagnetizer. The gaussmeter checks that demagnetization was successful by readings of 0. Removed equipment is then reinstalled and power systems are re-energized.

    Original Title

    05-54-00-PRO-10000-001

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for demagnetizing the external parts of an aircraft airframe. It involves preparing the aircraft by shutting down engines and de-energizing power systems. Magnetic areas are then identified and demagnetized using a gaussmeter and demagnetizer. The gaussmeter checks that demagnetization was successful by readings of 0. Removed equipment is then reinstalled and power systems are re-energized.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    43 views3 pages

    05 54 00 Pro 10000 001

    Uploaded by

    Jhony Bhat
    This document provides instructions for demagnetizing the external parts of an aircraft airframe. It involves preparing the aircraft by shutting down engines and de-energizing power systems. Magnetic areas are then identified and demagnetized using a gaussmeter and demagnetizer. The gaussmeter checks that demagnetization was successful by readings of 0. Removed equipment is then reinstalled and power systems are re-energized.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    05-54-00 PRO 10000-001

    DEMAGNETISATION OF THE
    EXTERNAL PARTS OF THE
    AIRFRAME 1 DEC14

    ZONING DATA
    ___________

    PREPARATION
    ___________

    PROVISION

    WORK : SKILL
    _____ ___
    MEN _________
    MAN-HOURS

    ELAPSED TIME :

    PUBLICATION
    ___________

    JIC : POWER SUPPLY FROM 24-31-00-EAD-10000


    BATTERIES
    JIC : DC AND AC CONSTANT 24-46-00-EAD-10000
    FREQUENCY EXTERNAL POWER
    SUPPLY

    ALX 05-54-00
    PRO 10000-001
    2-400 PAGE 1
    DEC 01/14
    05-54-00 PRO 10000-001
    DEMAGNETISATION OF THE
    EXTERNAL PARTS OF THE
    AIRFRAME 2 DEC14

    001 ___________
    PREPARATION

    1. IN CASE OF MAGNETIC PERTURBATIONS ON VARIOUS


    ITEMS OF EQUIPMENT (STANDBY COMPASS, ADF,
    FLUX VALVE...), PERFORM DEMAGNETISATION
    PROCEDURE.

    2. MAKE SURE THAT THE ENGINES ARE SHUT DOWN.

    002 ____________________________________
    DE-ENERGIZING OF SYSTEM FROM BATTERY

    SEE JOB INSTRUCTION CARD


    243100-EAD-10000

    003 DE-ENERGIZATION OF AIRCRAFT DC AND AC CONSTANT


    ______________________________________________
    FREQUENCY NETWORK
    _________________

    SEE JOB INSTRUCTION CARD


    244600-EAD-10000

    004 _______
    REMOVAL

    REMOVE ITEMS OF EQUIPMENT WHICH ARE SUSCEPTIBLE


    TO BE DAMAGED AND KEEP THEM AWAY FROM MAGNETIC
    SOURCES.

    NOTE : REFER TO CORRESPONDING JOB INSTRUCTION


    CARDS FOR REMOVAL/INSTALLATION OF THESE
    ITEMS OF EQUIPMENT.

    005 _________
    PROCEDURE

    1. USE A GAUSSMETER TO FIND THE MAGNETIC AREAS


    AND RECORD THE VALUE OF THE MAGNETIC FIELD
    OF EACH AREA.

    2. DEMAGNETISE EACH AREA USING A DEMAGNETISER.

    NOTE : REFER TO DEMAGNETISER MANUFACTURER


    INSTRUCTIONS.

    *** CONTINUED ***

    ALX 05-54-00
    PRO 10000-001
    2-400 PAGE 2
    DEC 01/14
    05-54-00 PRO 10000-001
    DEMAGNETISATION OF THE
    EXTERNAL PARTS OF THE
    AIRFRAME 3 DEC14

    3. USING A GAUSSMETER, CHECK THAT EACH AERA HAS


    BEEN DEMAGNETISED (VALUE READ ON GAUSSMETER
    IS ABOUT 0). IN THE OPPOSITE CASE, REPEAT
    THE DEMAGNETISATION PROCEDURE.

    006 ____________
    INSTALLATION

    INSTALL ITEMS OF EQUIPMENT PREVIOUSLY REMOVED,


    AS PER CORRESPONDING JOB INSTRUCTION CARDS.

    007 _________________________________
    ENERGIZING OF SYSTEM FROM BATTERY

    SEE JOB INSTRUCTION CARD


    243100-EAD-10000

    008 ENERGIZATION OF AIRCRAFT DC AND AC CONSTANT


    ___________________________________________
    FREQUENCY NETWORK
    _________________

    SEE JOB INSTRUCTION CARD


    244600-EAD-10000

    ***** E N D O F T E X T *****

    ALX 05-54-00
    PRO 10000-001
    2-400 PAGE 3
    DEC 01/14

    You might also like