05-51-10 DVI 10000-001

INSPECTION AFTER
HARD LANDING
1 SEP19

ZONING DATA
___________

ZONE : 210
700

PREPARATION
___________

PROVISION

WORK : SKILL
_____ ___
MEN _________
MAN-HOURS

ELAPSED TIME :

GSE : 01 ACCESS PLATFORM

PUBLICATION
___________

JIC : EXTERNAL CLEANING 12-21-11-CLN-10000

JIC : INTERNAL CLEANING 12-21-12-CLN-10000
JIC : NORMAL EXTENSION AND 32-31-00-FUT-10000
RETRACTION FUNCTIONAL
TEST
JIC : MLG SHOCK ABSORBER 12-14-32-SRV-10010
NITROGEN CHARGING
WITH A/C ON WHEELS
JIC : MEASUREMENT 05-56-00-MSN-10000
JIC : FUNCTIONAL CHECK OF 27-50-00-FUT-10000
FLAP CONTROL
JIC : DVI ON WING SUPPORT 53-51-00-DVI-10010
FITTING
JIC : VISUAL INSPECTION OF 57-15-10-DVI-10000
SHEAR WEB AT RIB 2
JIC : DVI ON UPPER LUG AREA 53-51-00-DVI-10020
(WING ATTACHMENT)
JIC : VISUAL INSPECTION OF 57-15-10-DVI-10010
AFT WING-TO-FUSELAGE
JUNCTION AT RIB 2

ALX 05-51-10
DVI 10000-001
2-400 PAGE 1
SEP 01/19
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING
2 SEP19

PUBLICATION
___________

JIC : VISUAL INSPECTION OF 57-15-10-DVI-10020

FORWARD WING-TO-FUSELAGE
JUNCTION AT RIB 2
JIC : VISUAL INSPECTION OF 57-15-21-DVI-10000
AFT WING-TO-FUSELAGE
JUNCTION AT RIB 4
JIC : VISUAL INSPECTION OF 57-15-22-DVI-10000
FORWARD WING-TO-FUSELAGE
JUNCTION AT RIB 4
JIC : DETAILED VISUAL INSPEC- 57-22-20-DVI-10000
TION OF REAR SPAR
FITTINGS
JIC : DETAILED VISUAL INSPEC- 57-24-00-DVI-10000
TION OF LOWER SKIN
BETWEEN RIBS 13 AND 14
JIC : DETAILED VISUAL 57-24-10-DVI-10000
INSPECTION OF UPPER SKIN
PANELS OF WING OUTER BOX
JIC : DETAILED VISUAL 57-24-20-DVI-10000
INSPECTION OF LOWER SKIN
PANELS OF WING OUTER BOX
JIC : DETAILED VISUAL 54-11-61-DVI-10000
INSPECTION OF FORWARD
ENGINE MOUNT
JIC : DETAILED VISUAL 54-21-61-DVI-10000
INSPECTION OF AFT ENGINE
MOUNT
JIC : DETAILLED VISUAL INSPEC 71-20-00-DVI-10000
OF ENGINE SHOCKMOUNTS
JIC : DETAILED VISUAL 71-23-61-DVI-10000
INSPECTION OF TORQUE
TUBE ASSEMBLY
JIC : PRATT & WHITNEY CANADA 72-05-50-PWC-00000
MAINTENANCE MANUAL
JIC : JACKING UP AND DOWN OF 07-11-00-JUP-10000
AIRCRAFT FOR MAINTENANCE
OPERATION
JIC : DVI OF THE NLG WHEEL 53-11-00-DVI-10030
WELL UPPER AND LATERAL
BULKHEADS

ALX 05-51-10
DVI 10000-001
2-400 PAGE 2
SEP 01/19
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING
3 SEP19

PUBLICATION
___________

JIC : REMOVAL AND INSTALLATION 12-37-32-RAI-10000

OF MLG WHEEL/TIRE ASSY
JIC : REMOVAL AND INSTALLATION 12-37-32-RAI-10010
OF NLG WHEEL/TIRE
ASSEMBLY
JIC : MLG SHOCK ABSORBER REPLE 12-12-32-SRV-10010
NISHING AND INFLATING
WITH A/C ON JACKS
JIC : NLG SHOCK ABSORBER REPLE 12-12-32-SRV-10020
NISHING AND INFLATING
WITH A/C ON JACKS
JIC : STEERING SYSTEM 32-51-00-FUT-10000
FUNCTIONAL TEST

ALX 05-51-10
DVI 10000-001
2-400 PAGE 3
SEP 01/19
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING
4 SEP19

001 _______________________
HARD LANDING DEFINITION

REF. FIG. 055110-DVI-00130

A HARD LANDING IS A VERTICAL ACCELERATION

INCREMENT AT THE AIRCRAFT CENTER OF GRAVITY.
THIS ANOMALY MAY BE REPORTED BY THE FLIGHT CREW
OR IDENTIFIED BY THE FLIGHT DATA RECORDER. THE
GRAPH GIVES THE VALUES, IN FUNCTION OF AIRCRAFT
WEIGHT AT TOUCH DOWN, ABOVE WHICH A LANDING IS
CONSIDERED AS HARD.

002 ____________________________________
CAUTION - LANDING GEAR SPECIFICITIES

NOTE: THE LOADS EXPERIENCED BY THE LANDING GEAR

AFTER HARD LANDING OR BOUNCED LANDING
DEPEND ON SEREVAL VARIABLE FACTORS WHICH
ARE:
-A/C SPEED
-A/C WEIGHT
-A/C POSITION (YAW, PITCH, ROLL,
ANGLES)

THOSE VARIABLE FACTORS ARE REQUIRED TO BE

ANALYSED IN ORDER TO DETERMINE THE LOADS
EXPERIENCED BY THE LANDING GEARS AND THE
SERVICEABILITY OF THE INVOLED LANDING
GEARS.

IN ALL CASES, THE OPERATORS SHOULD NOTIFY

ATR AS SOON AS POSSIBLE. INCLUDE FULL
DETAILS OF THE INCIDENT AND RESULTS OF
MAINTENANCE ACTIONS PERFORMED USING
THIS JIC SO THAT ADVICE AND ASSISTANCE
MAY BE GIVEN TO ENABLE PROMPT AND SAFE
RETURN TO SERVICE OF THE AIRCRAFT.

003 DEFINITION OF RESTRICTED AND EXTENDED

_________________________________________
INSPECTION
__________

WHEN A HARD LANDING IS REPORTED BY THE CREW,

*** CONTINUED ***

ALX 05-51-10
DVI 10000-001
2-400 PAGE 4
SEP 01/19
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING
5 SEP19

THE AIRCRAFT MUST BE SUBJECTED TO A RESTRICTED

VISUAL INSPECTION IN ORDER TO DETECT ANY
RESULTING DEFORMATION OR DAMAGE.

TWO CASES MAY OCCUR :

1. IF THE VISUAL RESTRICTED INSPECTION REVEALS

NO ANOMALIES, THE AIRCRAFT CAN BE RETURNED
TO SERVICE WITHOUT FURTHER ACTION.

2. IF ANOMALIES ARE DETECTED DURING THE VISUAL

RESTRICTED INSPECTION, THE AIRCRAFT
MUST BE SUBJECTED TO A VISUAL EXTENDED
INSPECTION.

NOTE : THIS CARD CALLS UP A CERTAIN NUMBER

OF INSPECTION CARDS.
ONLY CERTAIN SECTIONS OF THESE CARDS
ARE APPLICABLE.

004 ___________
PREPARATION

1. IN FLIGHT COMPARTMENT DISPLAY WARNING

NOTICES PROHIBITING OPERATION OF CONTROLS
AND HYDRAULIC, ELECTRIC AND ELECTRONIC
SYSTEMS.

2. POSITION ACCESS PLATFORMS AS NECESSARY FOR

THE INSPECTION.

005 _________________
EXTERNAL CLEANING

SEE JOB INSTRUCTION CARD

122111-CLN-10000

006 _________________
INTERNAL CLEANING

SEE JOB INSTRUCTION CARD

122112-CLN-10000

*** CONTINUED ***

ALX 05-51-10
DVI 10000-001
2-400 PAGE 5
SEP 01/19
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING
6 SEP19

007 ===============================================
_______________________________________________
=
_______________________________________________
RESTRICTED INSPECTION =
===============================================
_______________________________________________

REF. FIG. 055110-DVI-00100, 055110-DVI-00110

055110-DVI-00120, 055110-DVI-00140.

008 _________________________
GENERAL VISUAL INSPECTION

1. INSPECTION
PERFORM A GENERAL VISUAL INSPECTION OF
THE FOLLOWING ZONES :

A. WINGS : ZONES 500-600

CHECK THAT THE CENTER WING UPPER SURFACE
AND LOWER SURFACE SKIN PANELS ARE FREE
FROM WRINKLING AND CHECK FOR LOOSE SCREWS
(1) AND RIVETS (2). CHECK THAT THE
WING-TO-FUSELAGE FAIRINGS (3) ARE
NOT DAMAGED. CHECK FOR FUEL LEAKS ON
WING LOWER SURFACE.

B. FUSELAGE : ZONES 200-300

CHECK THAT SKIN PANELS ARE FREE FROM
CRACK AND DEFORMATION,ESPECIALLY AT
FUSELAGE UPPER SECTION LEVEL (4). CHECK
FOR LOOSE RIVETS (5) AT LONGITUDINAL
PANEL JUNCTION LINES ; PAY SPECIAL
ATTENTION TO ZONE AFT OF BULKHEAD (6).

C. STABILIZERS : ZONE 300

CHECK THAT SKIN PANELS ARE FREE FROM
WRINKLING AND LOOSE RIVETS. CHECK THAT
FAIRINGS (7) ARE NOT DAMAGED.

D. CONTROL SURFACES
CHECK OPERATION OF ALL CONTROL SURFACES
(13) AND THEIR CONTROLS. CHECK OVER

*** CONTINUED ***

ALX 05-51-10
DVI 10000-001
2-400 PAGE 6
SEP 01/19
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING
7 SEP19

FULL TRAVEL RANGE FOR FRICTION, BINDING

AND JAMMING.

E. LANDING GEARS : ZONE 700

(1)MAIN LANDING GEARS
(A)CHECK THAT MAIN LANDING GEAR
STRUCTURE AND THE STRUCTURE TO
WHICH LANDING GEARS ARE ATTACHED
ARE NOT DEFORMED.
(B)CHECK THAT THE WHEELS, AND
ESPECIALLY THE RIM BEADS (8), ARE
FREE FROM CRACKS AND DEFORMATION.
(C)CHECK SHOCK ABSORBERS, THE GEOMETRY
OF BRACES (9) AND ACTUATOR ATTACH
FITTINGS (10).
NOTE: IN CASE OF LANDING GEAR DOWN
LIMITING SPEED (VLE-VLO)
EXCEEDED, AFTER GENERAL VI-
SUAL INSPECTION OF ABOVE
POINTS.
PERFORM DETAILED VISUAL INS-
PECTION OF DOORS AND HINGE
FITTINGS (1) AND (2). ALSO
INSPECT BRACE STRUT ATTACH-
MENT POINTS AND FITTINGS (3).

(2)NOSE GEAR
(A)CHECK THAT NOSE GEAR STRUCTURE
AND STRUCTURE TO WHICH NOSE GEAR
IS ATTACHED ARE NOT DEFORMED.
(B)CHECK THAT THE WHEELS, AND
ESPECIALLY THE RIM BEADS (12), ARE
FREE FROM CRACKS AND DEFORMATION.
(C)CHECK NOSE WHEEL STEERING ACTUA-
TING SYSTEM FOR EXCESSIVE PLAY.
(D)VISUALLY CHECK DRAG BRACE AND ITS
ATTACHMENT TO BARREL. CHECK FOR
CORRECT ALIGNMENT.

*** CONTINUED ***

ALX 05-51-10
DVI 10000-001
2-400 PAGE 7
SEP 01/19
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING
8 SEP19

009 __________________________
DETAILED VISUAL INSPECTION

PERFORM THE FOLLOWING OPERATIONS :

010 ______________________________________________
DETAILED VISUAL INSPECTION OF FRAMES 25 AND 27

REF. FIG. 055110-DVI-00150

1. PERFORM A DETAILED VISUAL INSPECTION OF THE

EXTERNAL SURFACE OF FRAME 25 AND FRAME 27,
FOR CRACKS DETECTION.
(ACCESS FROM MLG WHEEL WELL).

011 FUNCTIONAL TEST OF NORMAL EXTENSION

___________________________________
AND RETRACTION
______________

SEE JOB INSTRUCTION CARD

323100-FUT-10000

012 MLG SHOCK ABSORBER NITROGEN

___________________________
CHARGING WITH A/C ON WHEELS
___________________________

SEE JOB INSTRUCTION CARD

121432-SRV-10010

013 ===============================================
_______________________________________________
=
_______________________________________________
EXTENDED INSPECTION =
===============================================
_______________________________________________

PERFORM THE FOLLOWING OPERATIONS :

014 ___________
MEASUREMENT

SEE JOB INSTRUCTION CARD

055600-MSN-10000

*** CONTINUED ***

ALX 05-51-10
DVI 10000-001
2-400 PAGE 8
SEP 01/19
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING
9 SEP19

015 ____________________
INSPECTION (GENERAL)

1. COMPARE THE RESULTS OF THE AIRCRAFT MEASURE-

MENT WITH THE VALUES GIVEN IN THE AIRCRAFT
INDIVIDUAL INSPECTION RECORD (AIR).

2. ANALYZE THE DISTORTED SECTION IN MORE

DETAILS.

3. PERFORM A DETAILED INSPECTION OF THE

AIRCRAFT IN ORDER TO DETECT ANY SHEARED OR
DEFORMED CONNECTING PARTS, LOCAL BUCKLING,
CRACKS ON SKIN PANEL OR FRACTURE OF COMPO-
NENTS IN ZONES GIVEN BELOW:

- WINGS
- STABILIZERS
- NACELLES
- FUSELAGE
- EQUIPMENT/FURNISHING

4. PERFORM THE NON-DESTRUCTIVE TESTS DESCRIBED

IN THE NDTM (NON DESTRUCTIVE TESTING MANUAL)
CORRESPONDING TO THE AREAS TO BE INSPECTED.

016 _______________________________
DETAILED INSPECTION OF THE WING

1. MANUALLY CHECK AILERON PLAY FOR FRICTION

OR HARD POINTS OVER FULL TRAVEL RANGE.

2. MANUALLY CHECK FLAP PLAY.

017 ________________________________
FUNCTIONAL CHECK OF FLAP CONTROL

SEE JOB INSTRUCTION CARD

275000-FUT-10000

018 ___________________________
DVI ON WING SUPPORT FITTING

SEE JOB INSTRUCTION CARD

535100-DVI-10010

*** CONTINUED ***

ALX 05-51-10
DVI 10000-001
2-400 PAGE 9
SEP 01/19
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING
10 SEP19

019 _______________________________________
VISUAL INSPECTION OF SHEAR WEB AT RIB 2

SEE JOB INSTRUCTION CARD

571510-DVI-10000

020 _______________________________________
DVI ON UPPER LUG AREA (WING ATTACHMENT)

SEE JOB INSTRUCTION CARD

535100-DVI-10020

021 VISUAL INSPECTION OF AFT WING-TO-FUSELAGE

_________________________________________
JUNCTION AT RIB 2
_________________

SEE JOB INSTRUCTION CARD

571510-DVI-10010

022 VISUAL INSPECTION OF FORWARD WING-TO-FUSELAGE

_____________________________________________
JUNCTION AT RIB 2
_________________

SEE JOB INSTRUCTION CARD

571510-DVI-10020

023 VISUAL INSPECTION OF AFT WING-TO-FUSELAGE

_________________________________________
JUNCTION AT RIB 4
_________________

SEE JOB INSTRUCTION CARD

571521-DVI-10000

024 VISUAL INSPECTION OF FORWARD WING-TO-FUSELAGE

_____________________________________________
JUNCTION AT RIB 4
_________________

SEE JOB INSTRUCTION CARD

571522-DVI-10000

025 VISUAL INSPECTION OF WING-TO-FUSELAGE JUNCTION

______________________________________________
ROD PICK-UP FITTINGS AT FR25 AND FR27
_____________________________________

PERFORM A VISUAL INSPECTION OF THE WING-TO-

FUSELAGE JUNCTION ROD PICK-UP FITTINGS AT FR25
AND FR27 AND OF ADJACENT AREA, INSIDE AND
OUTSIDE THE AIRCRAFT (SKIN AND FRAMES).

*** CONTINUED ***

ALX 05-51-10
DVI 10000-001
2-400 PAGE 10
SEP 01/19
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING
11 SEP19

026 DETAILED VISUAL INSPECTION OF REAR SPAR

_______________________________________
FITTINGS
________

SEE JOB INSTRUCTION CARD

572220-DVI-10000

027 DETAILED VISUAL INSPECTION OF LOWER SKIN

________________________________________
BETWEEN RIB 13 AND RIB 14
_________________________

SEE JOB INSTRUCTION CARD

572400-DVI-10000

028 DETAILED VISUAL INSPECTION OF UPPER SKIN

________________________________________
PANELS OF WING UPPER BOX
________________________

SEE JOB INSTRUCTION CARD

572410-DVI-10000

029 DETAILED VISUAL INSPECTION OF LOWER SKIN

________________________________________
PANELS OF WING OUTER BOX
________________________

SEE JOB INSTRUCTION CARD

572420-DVI-10000

030 ______________________________________
DETAILED INSPECTION OF THE STABILIZERS

1. PERFORM DETAILED VISUAL INSPECTION OF

STABILIZER STRUCTURES ESPECIALLY AT FUSELAGE
ATTACHMENT POINTS.

2. CHECK FOR CORRECT OPERATION OF THE CONTROL

SURFACES AND THAT THERE IS NEITHER FRICTION
NOR HARD POINT. MANUALLY CHECK FOR PLAY IN
THE CONTROL BEARINGS AND LINKS AND FOR
CORRECT ALIGNMENT.

031 _______________________________
DETAILED INSPECTION OF NACELLES

REF. FIG. 055110-DVI-00100

1. CHECK CONDITION OF COWLS AND FAIRINGS.

*** CONTINUED ***

ALX 05-51-10
DVI 10000-001
2-400 PAGE 11
SEP 01/19
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING
12 SEP19

2. CHECK UNDER WING BOX (14) AND UNDER WING

BOX-TO-WING JUNCTION.

032 DETAILED VISUAL INSPECTION OF FORWARD ENGINE

____________________________________________
MOUNT
_____

SEE JOB INSTRUCTION CARD

541161-DVI-10000

CHECK CONDITION OF ENGINE ATTACH FITTINGS

(SHOCK MOUNTS, INTERMEDIATE FRAME PICK-UP
FITTINGS).

033 DETAILED VISUAL INSPECTION OF AFT ENGINE

________________________________________
MOUNT
_____

SEE JOB INSTRUCTION CARD

542161-DVI-10000

CHECK WING-TO-FUSELAGE MOUNT ATTACH FITTINGS

AND CHECK THEIR GEOMETRY.

034 ________________________________________
VISUAL INSPECTION OF ENGINE SHOCK MOUNTS

SEE JOB INSTRUCTION CARD

712000-DVI-10000

035 DETAILED VISUAL INSPECTION OF TORQUE TUBE

_________________________________________
ASSEMBLY
________

SEE JOB INSTRUCTION CARD

712361-DVI-10000

DO NOT PERFORM THIS INSPECTION IF A NEW TORQUE

TUBE ASSEMBLY IS INSTALLED.

036 ___________________________________________
PRATT-&-WHITNEY SPECIFIC ENGINE INSPECTIONS

SEE JOB INSTRUCTION CARD

(PRATT & WHITNEY CANADA MAINTENANCE MANUAL,
CHAPTER 05-50-00).

*** CONTINUED ***

ALX 05-51-10
DVI 10000-001
2-400 PAGE 12
SEP 01/19
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING
13 SEP19

037 _______________________________
DETAILED INSPECTION OF FUSELAGE

REF. FIG. 055110-DVI-00120

1. CHECK THE MAIN LANDING GEAR FAIRINGS.

2. CHECK FOR WRINKLING, LOOSE RIVETS AND CRACKS

ESPECIALLY AT LEVEL OF FUSELAGE UPPER
SECTION AND ALL SKIN PANEL LONGITUDINAL
JUNCTIONS AT LEVEL OF MAIN FRAMES (15).

3. VISUALLY CHECK THE STRUCTURAL INTEGRITY OF

FORWARD AND REAR PRESSURE BULKHEADS.

4. VISUALLY CHECK CONDITION OF PASSENGER

COMPARTMENT FLOOR PANELS.

038 ____________________________________________
DETAILED INSPECTION OF EQUIPMENT/FURNISHINGS

CHECK ATTACHMENT OF EMERGENCY EQUIPMENT AND

CAPTAIN, FIRST OFFICER AND PASSENGER SEATS.

039 ______________________
JACKING UP OF AIRCRAFT

SEE JOB INSTRUCTION CARD

071100-JUP-10000

040 DETAILED VISUAL INSPECTION OF NLG WHEEL WELL

____________________________________________
UPPER AND LATERAL BULKHEADS
___________________________

SEE JOB INSTRUCTION CARD

531100-DVI-10030

041 ________________________
NORMAL RETRACTION OF L/G

SEE JOB INSTRUCTION CARD

323100-FUT-10000

*** CONTINUED ***

ALX 05-51-10
DVI 10000-001
2-400 PAGE 13
SEP 01/19
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING
14 SEP19

042 _______________________
NORMAL EXTENSION OF L/G

SEE JOB INSTRUCTION CARD

323100-FUT-10000

043 ______________________________
REMOVAL OF MLG WHEEL/TIRE ASSY

SEE JOB INSTRUCTION CARD

123732-RAI-10000

044 ______________________________
REMOVAL OF NLG WHEEL/TIRE ASSY

SEE JOB INSTRUCTION CARD

123732-RAI-10010

045 ___________________________________________
DETAILED VISUAL INSPECTION OF LANDING GEARS

REF. FIG. 055110-DVI-00110

WHEN THE DETAILED VISUAL INSPECTION IS PERFOR-

MED AFTER A GENERAL VISUAL INSPECTION, PERFORM
IN ADDITION A COMPLETE CHECK OF THE LANDING
GEARS.

1. CHECK CONDITION OF FUSELAGE-GEAR JUNCTION

STRUCTURAL COMPONENTS.
- MAKE CERTAIN THAT FUSELAGE-LANDING GEAR
JUNCTION FITTING SHOWS NO SIGNS OF
CRACKS.
- MAKE CERTAIN THAT FASTENERS OF THIS
FITTING ARE IN GOOD CONDITION.
- CHECK FOR CORRECT CONDITION OF
STRUCTURAL BRACE STRUTS AND JUNCTION
COMPONENTS.

2. PERFORM DYE PENETRANT INSPECTION OF RIMS

AND AXLES. REFER TO GENERAL CHAPTER IN
NON DESTRUCTIVE TESTING MANUAL.

3. BY DYE PENETRANT INSPECTION, CHECK THAT

BRACE FORK ENDS, ARMS AND ACTUATORS ARE

*** CONTINUED ***

ALX 05-51-10
DVI 10000-001
2-400 PAGE 14
SEP 01/19
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING
15 SEP19

FREE FROM CRACKS.

4. CHECK THAT PINS ARE NOT SHEARED.

5. VISUALLY CHECK SHOCK ABSORBER ATTACH

FITTINGS AND WHEEL WELL STRUCTURE.

046 MLG SHOCK ABSORBER REPLENISHING

_______________________________
AND INFLATING WITH A/C ON JACKS
_______________________________

SEE JOB INSTRUCTION CARD

121232-SRV-10010

047 NLG SHOCK ABSORBER REPLENISHING

_______________________________
AND INFLATING WITH A/C ON JACKS
_______________________________

SEE JOB INSTRUCTION CARD

121232-SRV-10020

048 ___________________________________________
INSTALLATION OF SERVICEABLE WHEEL/TIRE ASSY

SEE JOB INSTRUCTION CARD

123732-RAI-10000

049 ___________________________________
INSTALLATION OF NLG WHEEL/TIRE ASSY

SEE JOB INSTRUCTION CARD

123732-RAI-10010

050 ____________________________________
LOWERING OF AIRCRAFT ONTO ITS WHEELS

SEE JOB INSTRUCTION CARD

071100-JUP-10000

051 __________________________________
FUNCTIONAL TEST OF STEERING SYSTEM

SEE JOB INSTRUCTION CARD

325100-FUT-10000

*** CONTINUED ***

ALX 05-51-10
DVI 10000-001
2-400 PAGE 15
SEP 01/19
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING
16 SEP19

052 ________
CLOSE-UP

1. MAKE SURE THAT WORKING AREA IS CLEAN AND

CLEAR OF TOOLS AND MISCELLANEOUS ITEMS OF
EQUIPMENT.

2. REMOVE ACCESS PLATFORM(S).

3. REMOVE WARNING NOTICE(S).

4. RESTORE AIRCRAFT TO ITS NORMAL

CONFIGURATION.

***** E N D O F T E X T *****

ALX 05-51-10
DVI 10000-001
2-400 PAGE 16
SEP 01/19
 05-51-10 DVI 10000-001
17 SEP19

ALX HARD LANDING 05-51-10

DVI 10000-001
2-400 PAGE 17
SEP 01/19
 05-51-10 DVI 10000-001
18 SEP19

ALX GENERAL INSPECTION OF

STRUCTURE
05-51-10
DVI 10000-001
2-400 PAGE 18
SEP 01/19
 05-51-10 DVI 10000-001
19 SEP19

ALX GENERAL INSPECTION OF

LANDING GEAR
05-51-10
DVI 10000-001
2-400 PAGE 19
SEP 01/19
 05-51-10 DVI 10000-001
20 SEP19

ALX FLIGHT CONTROL SURFACES

AND UPPER FUSELAGE
05-51-10
DVI 10000-001
2-400 PAGE 20
SEP 01/19
 05-51-10 DVI 10000-001
21 SEP19

ALX INSPECTION OF LANDING

GEAR DOORS
05-51-10
DVI 10000-001
2-400 PAGE 21
SEP 01/19
 05-51-10 DVI 10000-001
22 SEP19

ALX DETAILED VISUAL

INSPECTION OF FRAMES
05-51-10
DVI 10000-001
25 AND 27 2-400 PAGE 22
SEP 01/19