05-51-10 DVI 10000-001

INSPECTION AFTER
HARD LANDING AND
EXCEEDING VLE,VLO 1 DEC13

ZONING DATA
___________

ZONE : 700

PREPARATION
___________

PROVISION

WORK : SKILL
_____ ___
MEN _________
MAN-HOURS

ELAPSED TIME :

PUBLICATION
___________

JIC : EXTERNAL CLEANING 12-21-11-CLN-10000

JIC : INTERNAL CLEANING 12-21-12-CLN-10000
JIC : NORMAL EXTENSION AND 32-31-00-FUT-10000
RETRACTION FUNCTIONAL
TEST
JIC : MLG SHOCK ABSORBER 12-14-32-SRV-10010
NITROGEN CHARGING
WITH A/C ON WHEELS
JIC : MEASUREMENT 05-56-00-MSN-10000
JIC : FUNCTIONAL CHECK OF 27-50-00-FUT-10000
FLAP CONTROL
JIC : DVI FOR CRACK DETECTION 53-51-00-DVI-10010
ON WING SUPPORT FITTING
JIC : VISUAL INSPECTION OF 57-15-10-DVI-10000
SHEAR WEB AT RIB 2
JIC : DVI ON UPPER LUG AREA 53-51-00-DVI-10020
(WING ATCH) FOR CRACK
AND CORROSION DETECTION
JIC : VISUAL INSPECTION OF 57-15-10-DVI-10010
AFT WING-TO-FUSELAGE
JUNCTION AT RIB 2

GA 05-51-10
DVI 10000-001
2-400 PAGE 1
DEC 01/13
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING AND
EXCEEDING VLE,VLO 2 DEC13

PUBLICATION
___________

JIC : VISUAL INSPECTION OF 57-15-10-DVI-10020

FORWARD WING-TO-FUSELAGE
JUNCTION AT RIB 2
JIC : VISUAL INSPECTION OF 57-15-21-DVI-10000
WING-TO-FUSELAGE
JUNCTION AT AFT RIB 4
JIC : VISUAL INSPECTION OF 57-15-22-DVI-10000
WING-TO-FUSELAGE
JUNCTION AT FORWARD RIB4
JIC : DETAILLED VISUAL INSPEC- 57-22-20-DVI-10000
TION OF REAR SPAR
FITTINGS
JIC : DETAILLED VISUAL INSPEC- 57-24-00-DVI-10000
TION OF LOWER SKIN
BETWEEN RIBS 13 AND 14
JIC : DETAILED VISUAL 57-24-10-DVI-10000
INSPECTION OF UPPER SKIN
PANELS OF WING OUTER BOX
JIC : DETAILED VISUAL 57-24-20-DVI-10000
INSPECTION OF LOWER SKIN
PANELS OF WING OUTER BOX
JIC : DETAILLED VISUAL 54-11-61-DVI-10000
INSPECTION OF FORWARD
ENGINE MOUNT
JIC : DETAILLED VISUAL 54-21-61-DVI-10000
INSPECTION OF AFT ENGINE
MOUNT
JIC : VISUAL INSPECTION OF 71-20-00-DVI-10000
ENGINE SHOCKMOUNTS
JIC : DETAILED VISUAL 71-23-61-DVI-10000
INSPECTION OF TORQUE
TUBE ASSEMBLY
JIC : PRATT & WHITNEY CANADA 72-05-50-PWC-00000
MAINTENANCE MANUAL
JIC : JACKING FOR A/C 07-11-00-JUP-10000
MAINTENANCE OPERATIONS
JIC : DVI OF THE NLG WHEEL 53-11-00-DVI-10030
WELL UPPER AND LATERAL
BULKHEADS

GA 05-51-10
DVI 10000-001
2-400 PAGE 2
DEC 01/13
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING AND
EXCEEDING VLE,VLO 3 DEC13

PUBLICATION
___________

JIC : NORMAL EXTENSION AND RE- 32-31-00-FUT-10000

TRACTION FUNCTIONAL TEST
JIC : MLG WHEEL/TIRE ASSY 12-37-32-RAI-10000
REMOVAL AND INSTALLATION
JIC : NLG WHEEL/TIRE ASSY 12-37-32-RAI-10010
REMOVAL AND INSTALLATION
JIC : MLG SHOCK ABSORBER REPLE 12-12-32-SRV-10010
NISHING AND INFLATING
WITH A/C ON JACKS
JIC : NLG SHOCK ABSORBER REPLE 12-12-32-SRV-10020
NISHING AND INFLATING
WITH A/C ON JACKS
JIC : STEERING SYSTEM 32-51-00-FUT-10000
FUNCTIONAL TEST

GA 05-51-10
DVI 10000-001
2-400 PAGE 3
DEC 01/13
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING AND
EXCEEDING VLE,VLO 4 DEC13

001 _______________________
HARD LANDING DEFINITION

REF. FIG. 055110-DVI-00130

A HARD LANDING IS A VERTICAL ACCELERATION

INCREMENT AT THE AIRCRAFT CENTER OF GRAVITY.
THIS ANOMALY MAY BE REPORTED BY THE FLIGHT CREW
AND CONFIRMED BY THE FLIGHT DATA RECORDER. THE
GRAPH GIVES THE VALUES, IN FUNCTION OF AIRCRAFT
WEIGHT AT TOUCH DOWN, ABOVE WHICH A LANDING IS
CONSIDERED AS HARD.

002 ____________________________________
CAUTION - LANDING GEAR SPECIFICITIES

NOTE: THE LOADS EXPERIENCED BY THE LANDING GEAR

AFTER HARD LANDING OR BOUNCED LANDING
DEPEND ON SEREVAL VARIABLE FACTORS WHICH
ARE:
-A/C SPEED
-A/C WEIGHT
-A/C POSITION (YAW, PITCH, ROLL,
ANGLES)

THOSE VARIABLE FACTORS ARE REQUIRED TO BE

ANALYSED IN ORDER TO DETERMINE THE LOADS
EXPERIENCED BY THE LANDING GEARS AND THE
SERVICEABILITY OF THE INVOLED LANDING
GEARS.

IN ALL CASES, THE OPERATORS SHOULD NOTIFY

ATR AS SOON AS POSSIBLE. INCLUDE FULL
DETAILS OF THE INCIDENT AND RESULTS OF
MAINTENANCE ACTIONS PERFORMED USING
THIS JIC SO THAT ADVICE AND ASSISTANCE
MAY BE GIVEN TO ENABLE PROMPT AND SAFE
RETURN TO SERVICE OF THE AIRCRAFT.

003 DEFINITION OF RESTRICTED AND EXTENDED

_________________________________________
INSPECTION
__________

WHEN A HARD LANDING IS REPORTED BY THE CREW,

*** CONTINUED ***

GA 05-51-10
DVI 10000-001
2-400 PAGE 4
DEC 01/13
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING AND
EXCEEDING VLE,VLO 5 DEC13

THE AIRCRAFT MUST BE SUBJECTED TO A RESTRICTED

VISUAL INSPECTION IN ORDER TO DETECT ANY
RESULTING DEFORMATION OR DAMAGE.

TWO CASES MAY OCCUR :

1. IF THE VISUAL RESTRICTED INSPECTION REVEALS

NO ANOMALIES, THE AIRCRAFT CAN BE RETURNED
TO SERVICE WITHOUT FURTHER ACTION.

2. IF ANOMALIES ARE DETECTED DURING THE VISUAL

RESTRICTED INSPECTION, THE AIRCRAFT
MUST BE SUBJECTED TO A VISUAL EXTENDED
INSPECTION.

NOTE : THIS CARD CALLS UP A CERTAIN NUMBER

OF INSPECTION CARDS.
ONLY CERTAIN SECTIONS OF THESE CARDS
ARE APPLICABLE.

004 ___________
PREPARATION

1. POSITION ACCESS PLATFORMS AS NECESSARY FOR

THE INSPECTION.

2. DISPLAY WARNING NOTICE IN FLIGHT COMPARTMENT

PROHIBITING OPERATION OF CONTROLS AND
HYDRAULIC, ELECTRIC AND ELECTRONIC SYSTEMS.

005 _________________
EXTERNAL CLEANING

SEE JOB INSTRUCTION CARD

122111-CLN-10000.

006 _________________
INTERNAL CLEANING

SEE JOB INSTRUCTION CARD

122112-CLN-10000

*** CONTINUED ***

GA 05-51-10
DVI 10000-001
2-400 PAGE 5
DEC 01/13
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING AND
EXCEEDING VLE,VLO 6 DEC13

007 ===============================================
_______________________________________________
=
_______________________________________________
RESTRICTED INSPECTION =
===============================================
_______________________________________________

REF. FIG. 055110-DVI-00100, 055110-DVI-00110

055110-DVI-00120, 055110-DVI-00140.

008 _________________________
GENERAL VISUAL INSPECTION

1. INSPECTION
PERFORM A GENERAL VISUAL INSPECTION OF
THE FOLLOWING ZONES :

A. WINGS : ZONES 500-600

CHECK THAT THE CENTER WING UPPER SURFACE
AND LOWER SURFACE SKIN PANELS ARE FREE
FROM WRINKLING AND CHECK FOR LOOSE SCREWS
(1) AND RIVETS (2). CHECK THAT THE
WING-TO-FUSELAGE FAIRINGS (3) ARE
NOT DAMAGED. CHECK FOR FUEL LEAKS ON
WING LOWER SURFACE.

B. FUSELAGE : ZONES 200-300

CHECK THAT SKIN PANELS ARE FREE FROM
CRACK AND DEFORMATION,ESPECIALLY AT
FUSELAGE UPPER SECTION LEVEL (4). CHECK
FOR LOOSE RIVETS (5) AT LONGITUDINAL
PANEL JUNCTION LINES ; PAY SPECIAL
ATTENTION TO ZONE AFT OF BULKHEAD (6).

C. STABILIZERS : ZONE 300

CHECK THAT SKIN PANELS ARE FREE FROM
WRINKLING AND LOOSE RIVETS. CHECK THAT
FAIRINGS (7) ARE NOT DAMAGED.

D. CONTROL SURFACES
CHECK OPERATION OF ALL CONTROL SURFACES
(13) AND THEIR CONTROLS. CHECK OVER

*** CONTINUED ***

GA 05-51-10
DVI 10000-001
2-400 PAGE 6
DEC 01/13
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING AND
EXCEEDING VLE,VLO 7 DEC13

FULL TRAVEL RANGE FOR FRICTION, BINDING

AND JAMMING.

E. LANDING GEARS : ZONE 700

(1)MAIN LANDING GEARS
(A)CHECK THAT MAIN LANDING GEAR
STRUCTURE AND THE STRUCTURE TO
WHICH LANDING GEARS ARE ATTACHED
ARE NOT DEFORMED.
(B)CHECK THAT THE WHEELS, AND
ESPECIALLY THE RIM BEADS (8), ARE
FREE FROM CRACKS AND DEFORMATION.
(C)CHECK SHOCK ABSORBERS, THE GEOMETRY
OF BRACES (9) AND ACTUATOR ATTACH
FITTINGS (10).
NOTE: IN CASE OF LANDING GEAR DOWN
LIMITING SPEED (VLE-VLO)
EXCEEDED, AFTER GENERAL VI-
SUAL INSPECTION OF ABOVE
POINTS.
PERFORM DETAILED VISUAL INS-
PECTION OF DOORS AND HINGE
FITTINGS (1) AND (2). ALSO
INSPECT BRACE STRUT ATTACH-
MENT POINTS AND FITTINGS (3).

(2)NOSE GEAR
(A)CHECK THAT NOSE GEAR STRUCTURE
AND STRUCTURE TO WHICH NOSE GEAR
IS ATTACHED ARE NOT DEFORMED.
(B)CHECK THAT THE WHEELS, AND
ESPECIALLY THE RIM BEADS (12), ARE
FREE FROM CRACKS AND DEFORMATION.
(C)CHECK NOSE WHEEL STEERING ACTUA-
TING SYSTEM FOR EXCESSIVE PLAY.
(D)VISUALLY CHECK DRAG BRACE AND ITS
ATTACHMENT TO BARREL. CHECK FOR
CORRECT ALIGNMENT.

*** CONTINUED ***

GA 05-51-10
DVI 10000-001
2-400 PAGE 7
DEC 01/13
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING AND
EXCEEDING VLE,VLO 8 DEC13

009 __________________________
DETAILED VISUAL INSPECTION

PERFORM THE FOLLOWING OPERATIONS :

010 ______________________________________________
DETAILED VISUAL INSPECTION OF FRAMES 25 AND 27

REF. FIG. 055110-DVI-00150

1. PERFORM A DETAILED VISUAL INSPECTION OF THE

EXTERNAL SURFACE OF FRAME 25 AND FRAME 27,
FOR CRACKS DETECTION.
(ACCESS FROM MLG WHEEL WELL).

011 _______________________________________________
NORMAL EXTENSION AND RETRACTION FUNCTIONAL TEST

SEE JOB INSTRUCTION CARD

323100-FUT-10000

012 MLG SHOCK ABSORBER NITROGEN

___________________________
CHARGING WITH A/C ON WHEELS
___________________________

SEE JOB INSTRUCTION CARD

121432-SRV-10010

013 ===============================================
_______________________________________________
=
_______________________________________________
EXTENDED INSPECTION =
===============================================
_______________________________________________

PERFORM THE FOLLOWING OPERATIONS :

014 ___________
MEASUREMENT

SEE JOB INSTRUCTION CARD

055600-MSN-10000

015 ____________________
INSPECTION (GENERAL)

1. COMPARE THE RESULTS OF THE AIRCRAFT MEASURE-

MENT WITH THE VALUES GIVEN IN THE AIRCRAFT

*** CONTINUED ***

GA 05-51-10
DVI 10000-001
2-400 PAGE 8
DEC 01/13
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING AND
EXCEEDING VLE,VLO 9 DEC13

INDIVIDUAL INSPECTION RECORD (AIR).

2. ANALYZE THE DISTORTED SECTION IN MORE

DETAILS.

3. PERFORM A DETAILED INSPECTION OF THE

AIRCRAFT IN ORDER TO DETECT ANY SHEARED OR
DEFORMED CONNECTING PARTS, LOCAL BUCKLING,
CRACKS ON SKIN PANEL OR FRACTURE OF COMPO-
NENTS IN ZONES GIVEN BELOW:

- WINGS
- STABILIZERS
- NACELLES
- FUSELAGE
- EQUIPMENT/FURNISHING

4. PERFORM THE NON-DESTRUCTIVE TESTS DESCRIBED

IN THE NDTM (NON DESTRUCTIVE TESTING MANUAL)
CORRESPONDING TO THE AREAS TO BE INSPECTED.

016 _______________________________
DETAILED INSPECTION OF THE WING

1. MANUALLY CHECK AILERON PLAY FOR FRICTION

OR HARD POINTS OVER FULL TRAVEL RANGE.

2. MANUALLY CHECK FLAP PLAY.

017 ________________________________
FUNCTIONAL CHECK OF FLAP CONTROL

SEE JOB INSTRUCTION CARD

275000-FUT-10000

018 _______________________________________________
DVI FOR CRACK DETECTION ON WING SUPPORT FITTING

SEE JOB INSTRUCTION CARD

535100-DVI-10010

*** CONTINUED ***

GA 05-51-10
DVI 10000-001
2-400 PAGE 9
DEC 01/13
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING AND
EXCEEDING VLE,VLO 10 DEC13

019 _______________________________________
VISUAL INSPECTION OF SHEAR WEB AT RIB 2

SEE JOB INSTRUCTION CARD

571510-DVI-10000

020 DVI ON UPPER LUG AREA (WING ATCH) FOR CRACK

___________________________________________
DETECTION
_________

SEE JOB INSTRUCTION CARD

535100-DVI-10020

021 VISUAL INSPECTION OF AFT WING-TO-FUSELAGE

_________________________________________
JUNCTION AT RIB 2
_________________

SEE JOB INSTRUCTION CARD

571510-DVI-10010

022 VISUAL INSPECTION OF FORWARD WING-TO-FUSELAGE

_____________________________________________
JUNCTION AT RIB 2
_________________

SEE JOB INSTRUCTION CARD

571510-DVI-10020

023 VISUAL INSPECTION OF WING-TO-FUSELAGE JUNCTION

______________________________________________
AT AFT RIB 4
____________

SEE JOB INSTRUCTION CARD

571521-DVI-10000

024 VISUAL INSPECTION OF WING-TO-FUSELAGE JUNCTION

______________________________________________
AT FORWARD RIB4
_______________

SEE JOB INSTRUCTION CARD

571522-DVI-10000

025 VISUAL INSPECTION OF WING-TO-FUSELAGE JUNCTION

______________________________________________
ROD PICK-UP FITTINGS AT FR25 AND FR27
_____________________________________

PERFORM A VISUAL INSPECTION OF THE WING-TO-

FUSELAGE JUNCTION ROD PICK-UP FITTINGS AT FR25
AND FR27 AND OF ADJACENT AREA, INSIDE AND

*** CONTINUED ***

GA 05-51-10
DVI 10000-001
2-400 PAGE 10
DEC 01/13
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING AND
EXCEEDING VLE,VLO 11 DEC13

OUTSIDE THE AIRCRAFT (SKIN AND FRAMES).

026 DETAILLED VISUAL INSPECTION OF REAR SPAR

________________________________________
FITTINGS
________

SEE JOB INSTRUCTION CARD

572220-DVI-10000

027 DETAILLED VISUAL INSPECTION OF LOWER SKIN

_________________________________________
BETWEEN RIB 13 AND RIB 14
_________________________

SEE JOB INSTRUCTION CARD

572400-DVI-10000

028 DETAILED VISUAL INSPECTION OF UPPER SKIN PANELS

_______________________________________________
OF WING UPPER BOX
_________________

SEE JOB INSTRUCTION CARD

572410-DVI-10000

029 DETAILED VISUAL INSPECTION OF LOWER SKIN PANELS

_______________________________________________
OF WING OUTER BOX
_________________

SEE JOB INSTRUCTION CARD

572420-DVI-10000

030 ______________________________________
DETAILED INSPECTION OF THE STABILIZERS

1. PERFORM DETAILED VISUAL INSPECTION OF

STABILIZER STRUCTURES ESPECIALLY AT FUSELAGE
ATTACHMENT POINTS.

2. CHECK FOR CORRECT OPERATION OF THE CONTROL

SURFACES AND THAT THERE IS NEITHER FRICTION
NOR HARD POINT. MANUALLY CHECK FOR PLAY IN
THE CONTROL BEARINGS AND LINKS AND FOR
CORRECT ALIGNMENT.

*** CONTINUED ***

GA 05-51-10
DVI 10000-001
2-400 PAGE 11
DEC 01/13
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING AND
EXCEEDING VLE,VLO 12 DEC13

031 _______________________________
DETAILED INSPECTION OF NACELLES

1. CHECK CONDITION OF COWLS AND FAIRINGS.

2. CHECK UNDERWING BOX (14) AND UNDERWING

BOX-TO-WING JUNCTION.

032 DETAILLED VISUAL INSPECTION OF FORWARD ENGINE

_____________________________________________
MOUNT
_____

SEE JOB INSTRUCTION CARD

541161-DVI-10000

CHECK CONDITION OF ENGINE ATTACH FITTINGS

(SHOCK MOUNTS, INTERMEDIATE FRAME PICK-UP
FITTINGS).

033 DETAILLED VISUAL INSPECTION OF AFT ENGINE

_________________________________________
MOUNT
_____

SEE JOB INSTRUCTION CARD

542161-DVI-10000

CHECK WING-TO-FUSELAGE MOUNT ATTACH FITTINGS

AND CHECK THEIR GEOMETRY.

034 ________________________________________
VISUAL INSPECTION OF ENGINE SCHOCKMOUNTS

SEE JOB INSTRUCTION CARD

712000-DVI-10000

035 DETAILED VISUAL INSPECTION OF TORQUE TUBE

_________________________________________
ASSEMBLY
________

SEE JOB INSTRUCTION CARD

712361-DVI-10000

NOTE : DO NOT PERFORM THIS INSPECTION IF A NEW

TORQUE TUBE ASSEMBLY IS INSTALLED.

*** CONTINUED ***

GA 05-51-10
DVI 10000-001
2-400 PAGE 12
DEC 01/13
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING AND
EXCEEDING VLE,VLO 13 DEC13

036 ___________________________________________
PRATT-&-WHITNEY SPECIFIC ENGINE INSPECTIONS

SEE JOB INSTRUCTION CARD

(PRATT & WHITNEY CANADA MAINTENANCE MANUAL,
CHAPTER 05-50-00).

037 _______________________________
DETAILED INSPECTION OF FUSELAGE

1. FUSELAGE

A. CHECK THE MAIN LANDING GEAR FAIRINGS.

B. CHECK FOR WRINKLING, LOOSE RIVETS AND

CRACKS ESPECIALLY AT LEVEL OF FUSELAGE
UPPER SECTION AND ALL SKIN PANEL LONGI-
TUDINAL JUNCTIONS AT LEVEL OF MAIN FRAMES
(15).

C. VISUALLY CHECK THE STRUCTURAL INTEGRITY

OF FORWARD AND REAR PRESSURE BULKHEADS.

D. VISUALLY CHECK CONDITION OF PASSENGER

COMPARTMENT FLOOR PANELS.

038 ____________________________________________
DETAILED INSPECTION OF EQUIPMENT/FURNISHINGS

1. CHECK ATTACHMENT OF EMERGENCY EQUIPMENT

AND CAPTAIN, FIRST OFFICER AND PASSENGER
SEATS.

039 ___________________
AIRCRAFT JACKING UP

SEE JOB INSTRUCTION CARD

071100-JUP-10000

040 DETAILED VISUAL INSPECTION OF NLG WHEEL WELL

____________________________________________
UPPER AND LATERAL BULKHEADS
___________________________

SEE JOB INSTRUCTION CARD

531100-DVI-10030

*** CONTINUED ***

GA 05-51-10
DVI 10000-001
2-400 PAGE 13
DEC 01/13
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING AND
EXCEEDING VLE,VLO 14 DEC13

041 _____________________
L/G NORMAL RETRACTION

SEE JOB INSTRUCTION CARD

323100-FUT-10000

042 ____________________
L/G NORMAL EXTENSION

SEE JOB INSTRUCTION CARD

323100-FUT-10000

043 REMOVAL OF MLG WHEEL/TIRE ASSY AND ADJACENT

___________________________________________
WHEEL/TIRE ASSIES FOR OVERHAUL
______________________________

SEE JOB INSTRUCTION CARD

123732-RAI-10000

REFER TO MANUFACTURER CMM FOR OVERHAUL

044 ______________________________
REMOVAL OF NLG WHEEL/TIRE ASSY

SEE JOB INSTRUCTION CARD

123732-RAI-10010

045 ___________________________________________
DETAILED VISUAL INSPECTION OF LANDING GEARS

REF. FIG. 055110-DVI-00110

WHEN THE DETAILED VISUAL INSPECTION IS PERFOR-

MED AFTER A GENERAL VISUAL INSPECTION, PERFORM
IN ADDITION A COMPLETE CHECK OF THE LANDING
GEARS.

1. CHECK CONDITION OF FUSELAGE-GEAR JUNCTION

STRUCTURAL COMPONENTS.
- MAKE CERTAIN THAT FUSELAGE-LANDING GEAR
JUNCTION FITTING SHOWS NO SIGNS OF
CRACKS.
- MAKE CERTAIN THAT FASTENERS OF THIS
FITTING ARE IN GOOD CONDITION.
- CHECK FOR CORRECT CONDITION OF
STRUCTURAL BRACE STRUTS AND JUNCTION

*** CONTINUED ***

GA 05-51-10
DVI 10000-001
2-400 PAGE 14
DEC 01/13
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING AND
EXCEEDING VLE,VLO 15 DEC13

COMPONENTS.

2. PERFORM DYE PENETRANT INSPECTION OF RIMS

AND AXLES. REFER TO GENERAL CHAPTER IN
NON DESTRUCTIVE TESTING MANUAL.

3. BY DYE PENETRANT INSPECTION, CHECK THAT

BRACE FORK ENDS, ARMS AND ACTUATORS ARE
FREE FROM CRACKS.

4. CHECK THAT PINS ARE NOT SHEARED.

5. VISUALLY CHECK SHOCK ABSORBER ATTACH

FITTINGS AND WHEEL WELL STRUCTURE.

046 MLG SHOCK ABSORBER REPLENISHING

_______________________________
AND INFLATING WITH A/C ON JACKS
_______________________________

SEE JOB INSTRUCTION CARD

121232-SRV-10010

047 NLG SHOCK ABSORBER REPLENISHING

_______________________________
AND INFLATING WITH A/C ON JACKS
_______________________________

SEE JOB INSTRUCTION CARD

121232-SRV-10020

048 ___________________________________________
INSTALLATION OF SERVICEABLE WHEEL/TIRE ASSY

SEE JOB INSTRUCTION CARD

123732-RAI-10000

049 ___________________________________
INSTALLATION OF NLG WHEEL/TIRE ASSY

SEE JOB INSTRUCTION CARD

123732-RAI-10010

050 ____________________________________
LOWERING OF AIRCRAFT ONTO ITS WHEELS

SEE JOB INSTRUCTION CARD

071100-JUP-10000

*** CONTINUED ***

GA 05-51-10
DVI 10000-001
2-400 PAGE 15
DEC 01/13
 05-51-10 DVI 10000-001
INSPECTION AFTER
HARD LANDING AND
EXCEEDING VLE,VLO 16 DEC13

051 __________________________________
FUNCTIONAL TEST OF STEERING SYSTEM

SEE JOB INSTRUCTION CARD

325100-FUT-10000

052 ________
CLOSE-UP

1. REMOVE ACCESS PLATFORMS.

2. REMOVE WARNING NOTICES DISPLAYED IN FLIGHT

COMPARTMENT.

3. MAKE CERTAIN THAT WORKING AREA IS CLEAN AND

CLEAR OF TOOLS AND MISCELLANEOUS ITEMS OF
EQUIPMENT.

4. RESTORE AIRCRAFT TO FLIGHT CONDITIONS.

***** E N D O F T E X T *****

GA 05-51-10
DVI 10000-001
2-400 PAGE 16
DEC 01/13
 05-51-10 DVI 10000-001
17 DEC13

GA HARD LANDING 05-51-10

DVI 10000-001
2-400 PAGE 17
DEC 01/13
 05-51-10 DVI 10000-001
18 DEC13

GA GENERAL INSPECTION OF
STRUCTURE
05-51-10
DVI 10000-001
2-400 PAGE 18
DEC 01/13
 05-51-10 DVI 10000-001
19 DEC13

GA GENERAL INSPECTION OF
LANDING GEAR
05-51-10
DVI 10000-001
2-400 PAGE 19
DEC 01/13
 05-51-10 DVI 10000-001
20 DEC13

GA FLIGHT CONTROL SURFACES

AND UPPER FUSELAGE
05-51-10
DVI 10000-001
2-400 PAGE 20
DEC 01/13
 05-51-10 DVI 10000-001
21 DEC13

GA INSPECTION OF LANDING
GEAR DOORS
05-51-10
DVI 10000-001
2-400 PAGE 21
DEC 01/13
 05-51-10 DVI 10000-001
22 DEC13

GA DETAILED VISUAL
INSPECTION OF FRAMES
05-51-10
DVI 10000-001
25 AND 27 2-400 PAGE 22
DEC 01/13