Universal Remote SUPERIOR AIRCO 1000 in 1 For AirCo

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

MANUAL: AIRCO

INSTRUCTION MANUAL FEATURES


REMOTE CONTROL KEYBOARD FAST COOL / FAST HEAT FUNCTION
1. Temperature Display Press "COOL" Fast Cool Key to automatically set the air conditioner to 21°C, middle fan and automatic blowing direction.
2. Fan Display Press "HOT" Fast Heat Key to automatically set the air conditioner to 27°C, middle fan and automatic blowing direction.
3. Temperature "+' key
1 9 4. Fan Direction Control key
10 TIMING ON/OFF FEATURE
5. Fan Key
2 11 Press "TIME ON" Key to increase the starting time for the air conditioner by 1 hour. The displayed time is the time when air
6. HOT Fast Heat Key
12 7. TIME ON Timer On Key conditioner will automatically be switched on.
8. SET Pressing "TIME OFF" Key will delay the time air conditioner will be turned off by 1 hour each time the key is pressed.
3 13 9. Run Mode Display
Always aim the remote control towards the air conditioner while operating on the remote control.
10. Signal Display
14 11. Fan Direction Display
12. Brand Code SETTING TIME FUNCTION
4 15
13. Temperature "-" key Press "CLOCK" Key to enter the clock setting state, clock will flash.
16
5 14. MODE Key Now adjust the current time by pressing Temperature "+" "-", once done press "CLOCK" Key again to exit the menu.
6 17 15. Automatic Fan Direction
7 18 16. POWER
17. COOL Fast Cool Key
8 19
18. TIME OFF Timer off Key WARRANTY
20
19. OK Enter Key
This product is covered by a 2 years guarantee from the date of purchase against any manufacturing defects,
20. CLOCK
excluding any defects arising from improper use. A purchase document must be produced along with the request
of repairing. Costs of return are at buyer’s expense.

AIRCO CONFIGURATION ATTENTION


Please insert 2 alkaline batteries 1,5V type AAA. In compliance with directive 2012/19/EU D.L N° 49/2014, Superior Srl, being the supplier of this product issues
There are two 2 ways to configure your new remote control A/B: the following information: it is mandatory not to dispose of the RAEE as if were urban waste, but to collect them

A) DIRECT CODE SETUP separately. When delivering the product upon purchasing a new one, the same manufacturer shall provide

1. Check the code list, please find the right code for your brand (major brands have got multiple codes to test) recycling through implemented and approved measures. This information is provided in order to prevent

Power on the air conditioner manually and aim the remote control towards the air conditioner. potential effects on the environment and human health due to the presence of dangerous substances in

2. Hold the "SET" Key (at least 3 seconds) until the code flashes in the display. electronic equipments or due to an improper use. Therefore every electronic equipment sold shall be subject to

Press Temperature Keys "+" or "-" to reach the right code you want to choose. to this directive and shall be marked with the symbol shown here below.

3. Press the "OK" Key and the code will be stored.


4. Check wheter the keys on the remote control work normally. If not, repeat steps 2/3/4
until finding a suitable code.

B) MANUAL CODE SEARCH


1. Power "on" the air conditioner manually and aim the remote control towards the air conditioner. DECLARATION OF CE CONFORMITY
2. Press and keep pressed the "SET" Key until the code flashes in the display, This product has been manufactured and supplied in compliance with all relevant
now browse all the codes by pressing the Temperature "+" Key until the air conditioner regulations and directives valid for all member states of European Union.
automatically turns off. Press the "OK" Enter Key to store the right code and finish the setup procedure. Formal documentation is kept by Superior Srl and available upon request.
MANUAL: AIRCO

You might also like