Maintenance

When operating the appliance with a filter, the customer must make sure that the manufacturer’s

instructions (water hardness / filter capacity) are correctly entered in the appliance.

Otherwise, repairs and maintenance may only be carried out by ELRO After Sales Service or by service

companies authorized by ELRO. In other cases, all guarantee and regress claims are invalid and the

appliance may not be cleaned with high pressure (HPC) or a water jet.

This also applies to additions or adaptations which were not authorized by ELRO.

It is recommended to have your appliance checked for proper functioning every 4 years by ELRO After

Sales Service.

Exception: Float-frying*), Fritomat*)

An annual check must be carried out and safety components must be replaced every 8 years!

7 Information/Service

Press (5) in the main menu. You can now proceed to the following settings:

Menu selection key / Function key

(1) Contrast lighter

(2) Contrast darker

(3) Language

(4) After Sales Service/Appliance information

(5) Appliance configuration

(A) Esc  Main menu

(B) –

(C) –

(D) –

7.1 Contrast

By pressing (1)(2), you can adjust the display contrast. The white bar indicates

the intensity.

7.2 Language

Press (3) for the language selection menu.

With (1) to (5), you can select the language. The active
language is displayed with a white background.

Confirm settings with (A) or (B).

7.3 SW and HW, Software type key

With (3), you access the appliance information menu. You can view appliance

information here.

- SW version and HW serial number press (4)

- Software type key, press (5).

The following illustration shows the appliance information available.

Browse forward and back with (B)(C). Press (A) to return to the main menu.

X101535E 27

7.4 Appliance information

After Sales Service

address

Software and hardware

information

Software type key

Date, time and

appliance type

Appliance temperature

Core temperature

Pressure in heating

system

Pressure in cooking

chamber

Energy consumption

Cold water consumption

Hot water consumption

Consumption Highspeed

IP address appliance
7.5 User code

Display control 90 has various user codes. Depending on the user code, the user has

various rights:

 2468 cooking programs

 2345 cooking programs and settings

Enter the user code with (2) to (4). Confirm entry with (D).

After confirmation, the corresponding configuration menu for the user code is

displayed. As information, the symbol appears between (A) and

(B).

X101535E 28

7.6 Cooking programs

Here, you can create, modify and save cooking programs in the cookbook (1). Furthermore, you can

modify with (2) the time zone, clock and date settings.

Menu selection key / Function key

(1) Cookbook

(2) Time zone, clock and date settings

(3) –

(4) –

(5) –

(A) Esc  Main menu

(B) Back to previous menu

(C) –

(D) –

7.6.1 Cookbook

Page 1 Page 2 Page 3 Page 4

Quit the cookbook with (A). Press (B)(C) to browse in the cookbook. By pressing (1) to (5),

you can select the corresponding program.

7.6.2 Creating a cooking program

Starting in the main menu, use the following keys:

  user code 

Select an existing cooking program. Make the desired modifications. If you press (A) you will be asked,

if you want to save the modifications.

7.6.3 Editing a cooking program

Menu selection key / Function key

(1) Options Switch on/off

(2) Increase temperature

(3) Decrease temperature

(4) Increase time

(5) Decrease time

(A) Esc  Main menu

(B) Next cooking phase

(C) Edit

(D) –

(1) Add cooking phase

(2) Delete cooking phase

(3) Edit cooking phase

(4) Delete cooking program

(5) –

(A) Esc  Main menu

(B) Back to previous menu

(C) –

(D) –

X101535E 29

7.6.4 Saving a cooking program

When you change a fixed cooking program, you can either save the program under a new name or
discard

it.

(A) Discard cooking program

(B) Save cooking program

Enter the user code with (2) to (4). Confirm entry with (D).

Rename the cooking program with (1) to (4).

Return to the previous menu with (B).

You can delete the suggested text or correct typing errors with

(C).

Confirm entry (D).

The program has been saved under a new name. It will be listed alpha-numerically

under the fixed cooking programs.

7.6.5 Setting time zone, clock and date

The following time zone settings are available:

MEZ: without automatic daylight saving settings

MESZ: with automatic daylight saving settings

The selected option has a light background.

Menu selection key / Function key

(1) Select time zone, MEZ or MESZ

(2) Earlier time

(3) Later time

(4) Earlier date

(5) Later date

(A) Esc  Main menu

(B) Back to the previous menu

(C) –

(D) –

X101535E 30

7.7 Cooking programs and settings

Menu selection key / Function key

Page 1

The following functions are available under this user code:

(1) Cookbook

(2) Time zone, clock and date settings

(3) WDS*) calibration

(4) Set temperature unit

(5) Set volume unit

(A) Esc  Main menu

(B) Back to previous menu

(C) To page 2

(D) –

Page 2

(1) Change horn signal tone

(2) Timeout

(3) Error messages

(4) –

(5) –

(A) Esc  Main menu

(B) Back to page 1

(C) To page 3

(D) –

7.7.1 Filter capacity

The filter capacity is entered via the user code „cooking programs settings“. The following entries must

be made at appliance commissioning or when the filter is changed: confirm the filter capacity and the
filter

replacement!

Menu selection key / Function key

(1) Filter

(2) Filter capacity, volume in litres more

(3) Filter capacity, volume in litres less

(4) Remaining quantity with filter replacement

(5) Confirm filter replacement

(A) Esc  Main menu

(B) Back to previous menu

(C) –

(D) –

7.7.1.1 Filter replacement

Before reaching the filter capacity, a maintenance message is generated asking you to

prepare for filter replacement.

Replace the filter. Confirm replacement with the user code „cooking programs

settings“. Press (5) filter replacement – the filter capacity values are reset!

When replacing the filter, check the filter capacity based on the filter manufacturer’s

data!

If you do not change the filter and the filter capacity is depleted, you cannot start ANY

pressure cooking process. You will be informed immediately with the error message

on the left. You MUST now carry out and then confirm the filter replacement.

X101535E 31

7.7.2 Water Dosing System WDS*) calibration

Set 10 litres with

(2)(3) 

Select cold water (4) with (D), fill

10 litres of water into the measuring

container. At 10 litres, press (4) 

cold water is calibrated.

Repeat if necessary.

Select hot water (5) with (D), fill 10 litres of water into the measuring

container. At 10 litres, press (5)  hot water is calibrated.

Repeat if necessary.

7.7.2.1 Function check

Return to the main menu with (A), select WDS*) with (C). Set 10 litres with (2)(3). Check both
cold and hot water! Start WDS*) with (D). Check the water volume flowing into the measuring

container. Calibration is correct if the water volume is 10 litres +/- 0.2.

7.7.3 Set temperature unit

Page 1

(4) Change from °C/°F

7.7.4 Set volume unit

Page 1

(5) Change from L / gal/UK / gal/US

7.7.5 Horn

Page 2

(1) Change horn signal. Six different signals are available.

7.7.6 Timeout

Page 2

(2) Timeout

Set the reaction time of the entry keys with (1)(2) by

selecting values between 1 and 5.

7.7.7 Error messages

Page 2

(3) provides a list of error messages.

7.7.8 Finding errors, error diagnosis and repair

Write down the error message and conditions. This information is important for ELRO After Sales
Service.

If the steam valve blows off steam continuously during a pressure cooking process or if the maximum

temperature is not reached, this could indicate a faulty setting of the boiling point at the appliance
location.

If the boiling point setting on the appliance (i.e. the maximum temperature setting) at the location does
not

correspond with the actual boiling point, it must be corrected according to the installation instructions

(chapter “Setting the appliance to the height above sea level”).

Frequency Maintenance Schedual :

Every 4 Years Every 8 Years

Appliance Lid X Checked for proper functioning
Non Return Valve X Checked for proper functioning
MB / AMB / WDS
Easy-tilt X Checked for proper functioning
-Manual
-Electronic
Autolift X Checked for proper functioning
High-speed X Checked for proper functioning
ELRO safety valve X Checked for proper functioning
ELRO multifunction X Checked for proper functioning
valve
Float-frying fritomat X Safety components must be
replaced every 8 Years

References :

ELRO WebSite.