Scribd Logo
Upload

Welcome to Scribd!

  • 939 views

    Candy Perilica Rublja Error Codes

    Uploaded by

    terranohr
    This document provides information on common error codes for washing machines, including: - E01 and E07 codes indicate issues with the door lock, wiring, or PCB board connection. - E02 codes mean problems with the fill system like blocked hoses or faulty valves. - E03 codes signal a drain issue usually from something stuck in the pump. - E04 may mean a leak causing water in the base activated the anti-flood sensor.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Candy Perilica Rublja Error Codes

    Uploaded by

    terranohr
    939 views2 pages
    This document provides information on common error codes for washing machines, including: - E01 and E07 codes indicate issues with the door lock, wiring, or PCB board connection. - E02 codes mean problems with the fill system like blocked hoses or faulty valves. - E03 codes signal a drain issue usually from something stuck in the pump. - E04 may mean a leak causing water in the base activated the anti-flood sensor.

    Original Description:

    Eror codes for Candy washing machine

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on common error codes for washing machines, including: - E01 and E07 codes indicate issues with the door lock, wiring, or PCB board connection. - E02 codes mean problems with the fill system like blocked hoses or faulty valves. - E03 codes signal a drain issue usually from something stuck in the pump. - E04 may mean a leak causing water in the base activated the anti-flood sensor.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    939 views2 pages

    Candy Perilica Rublja Error Codes

    Uploaded by

    terranohr
    This document provides information on common error codes for washing machines, including: - E01 and E07 codes indicate issues with the door lock, wiring, or PCB board connection. - E02 codes mean problems with the fill system like blocked hoses or faulty valves. - E03 codes signal a drain issue usually from something stuck in the pump. - E04 may mean a leak causing water in the base activated the anti-flood sensor.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    An E01 error code (or on some models an E07 error code) indicates an issue with the door

    lock. This could be an issue with the door lock itself, the wiring or the connection to the PCB
    board.

    An E02 error code will indicate an issue with the fill. Now this either means that there is a
    trapped, blocked or pinched fill hose, or an issue with the water supply or with the valves.

    An E03 error code indicates there was a problem with the drain circuit. This usually means
    there is something stuck in the pump.

    An E04 error code may mean there’s a problem with the anti flood, this means you have
    water in the base and may indicate that you have a leak.

    An E05 error code means that you have an issue with the NTC (the water temperature sensor
    at the back). It may be as simple as a loose connection which needs reconnecting.

    An E06 error code is either a problem with the machine being out of balance if the error code
    is displayed straight after a spin or it's a problem with the control board being faulty.

    An E07 error code is either a problem with the door lock or with the motor being jammed and
    unable to spin.

    An E08 error code indicates a problem with the motor speed sensor. This can result in the
    motor spinning up at very high speed for a few seconds before slowing down and then
    stopping. It may also mean that the motor is not spinning.

    An E09 error code means that you have a problem with the motor triac on the circuit board.
    This may mean that you don't have any motor drive.

    An E10 error code on older machines may mean there's a problem with the motorised
    selector. On new machines it could indicate a drum sensor issue if fitted.

    Now error codes 11 through to 14 all relate to issues with washer dryers.

    An E11 error code indicates there's an open circuit on the dryer heater or a module issue. It's
    a good idea to check the wiring from the sensor on the top the drum to the circuit board as
    this can become damaged during the spin cycle.

    An E12 error code suggests a PCB communication error or an open circuit on the dryer heater
    sensor.

    An E13 error code means that there is an issue with the PCB as does the E14 error code. This
    could also indicate an issue with the dryer heater or the NTC.

    An E15 error code indicates that there may be an issue with the circuit board. It may not be
    programmed or the memory chip may have become corrupted.

    An E16 error code means there is a heater insulation problem which could cause the tripping
    of your fuse box and other random cycle errors, but it’s hard to prove without the
    replacement of your heater.
    An E17 error code means that there is an issue with the motor tachometer and could result in
    your motor not spinning.

    An E18 error code means that there's an issue with the PCB.

    These are the Candy and Hoover error code faults, but they should only be used as a guide.
    Please see our other diagnosis videos for further assistance.

    You might also like