Cse GSM Report
Cse GSM Report
Cse GSM Report
org
A
Seminar report
On
SUBMITTED TO:
www.studymafia.org
SUBMITTED BY:
www.studymafia.org
www.studymafia.org
Acknowledgement
I would like to thank respected Mr.. and Mr. ..for giving me such a wonderful
opportunity to expand my knowledge for my own branch and giving me guidelines to present a
seminar report. It helped me a lot to realize of what we study for.
Secondly, I would like to thank my parents who patiently helped me as i went through my work
and helped to modify and eliminate some of the irrelevant or un-necessary stuffs.
Thirdly, I would like to thank my friends who helped me to make my work more organized and
well-stacked till the end.
Next, I would thank Microsoft for developing such a wonderful tool like MS Word. It helped my
work a lot to remain error-free.
Last but clearly not the least, I would thank The Almighty for giving me strength to complete my
report on time.
www.studymafia.org
Preface
I have made this report file on the topic GSM (Global System for Mobile Communications);I
have tried my best to elucidate all the relevant detail to the topic to be included in the report.
While in the beginning I have tried to give a general view about this topic.
My efforts and wholehearted co-corporation of each and everyone has ended on a successful
note. I express my sincere gratitude to ..who assisting me throughout the preparation
of this topic. I thank him for providing me the reinforcement, confidence and most importantly
the track for the topic whenever I needed it.
www.studymafia.org
Content
Introduction
History
GSM - Specification
GSM Services
Gsm Architecture
Network sub-system
Radio sub-system
Operation and maintenance sub-system
GSM Network Areas
Advantages of GSM
Disadvantages of GSM
Conclusion
www.studymafia.org
Introduction
GSM (Global System for Mobile Communications, originally Groupe Spcial Mobile), is a
standard developed by the European Telecommunications Standards Institute (ETSI) to describe
protocols for second-generation (2G) digital cellular networks used by mobile phones. As of
2014 it has become the default global standard for mobile communications - with over 90%
market share, operating in over 219 countries and territories.
2G networks developed as a replacement for first generation (1G) analog cellular networks, and
the GSM standard originally described a digital, circuit-switched network optimized for full
duplex voice telephony.
This expanded over time to include data communications, first by circuit-switched transport, then
by packet data transport via GPRS (General Packet Radio Services) and EDGE (Enhanced Data
rates for GSM Evolution or EGPRS).
Subsequently, the 3GPP developed third-generation (3G) UMTS standards followed by fourthgeneration (4G) LTE Advanced standards, which do not form part of the ETSI GSM standard.
"GSM" is a trademark owned by the GSM Association. It may also refer to the (initially) most
common voice codec used, Full Rate.
www.studymafia.org
History
In 1982, work began to develop a European standard for digital cellular voice telephony when
the European Conference of Postal and Telecommunications Administrations (CEPT) created the
Groupe Spcial Mobile committee and later provided a permanent technical support group based
in Paris. Five years later, in 1987, 15 representatives from 13 European countries signed a
memorandum of understanding in Copenhagen to develop and deploy a common cellular
telephone system across Europe, and EU rules were passed to make GSM a mandatory standard.
The decision to develop a continental standard eventually resulted in a unified, open, standardbased network which was larger than that in the United States.
In 1987 Europe produced the very first agreed GSM Technical Specification in February.
Ministers from the four big EU countries cemented their political support for GSM with the
Bonn Declaration on Global Information Networks in May and the GSM MoU was tabled for
signature in September. The MoU drew-in mobile operators from across Europe to pledge to
invest in new GSM networks to an ambitious common date. It got GSM up and running fast.
In this short 37-week period the whole of Europe (countries and industries) had been brought
behind GSM in a rare unity and speed guided by four public officials Armin Silberhorn
(Germany), Stephen Temple (UK), Philippe Dupuis (France), and Renzo Failli (Italy). In 1989,
the Groupe Spcial Mobile committee was transferred from CEPT to the European
Telecommunications Standards Institute (ETSI).
In parallel, France and Germany signed a joint development agreement in 1984 and were joined
by Italy and the UK in 1986. In 1986 the European Commission proposed reserving the
900 MHz spectrum band for GSM. The world's first GSM call was made by the former Finnish
prime minister Harri Holkeri to Kaarina Suonio (mayor in city of Tampere) on July 1, 1991, on a
network built by Telenokia and Siemens and operated by Radiolinja. The following year in 1992,
the first short messaging service (SMS or "text message") message was sent and Vodafone UK
and Telecom Finland signed the first international roaming agreement.
Work began in 1991 to expand the GSM standard to the 1800 MHz frequency band and the first
1800 MHz network became operational in the UK by 1993. Also that year, Telecom Australia
became the first network operator to deploy a GSM network outside Europe and the first
practical hand-held GSM mobile phone became available.
In 1995, fax, data and SMS messaging services were launched commercially, the first 1900 MHz
GSM network became operational in the United States and GSM subscribers worldwide
exceeded 10 million. Also this year, the GSM Association was formed. Pre-paid GSM SIM cards
were launched in 1996 and worldwide GSM subscribers passed 100 million in 1998.
In 2000, the first commercial GPRS services were launched and the first GPRS compatible
handsets became available for sale. In 2001 the first UMTS (W-CDMA) network was launched,
a 3G technology that is not part of GSM. Worldwide GSM subscribers exceeded 500 million. In
2002 the first Multimedia Messaging Service (MMS) were introduced and the first GSM
network in the 800 MHz frequency band became operational. EDGE services first became
www.studymafia.org
operational in a network in 2003 and the number of worldwide GSM subscribers exceeded 1
billion in 2004.
By 2005, GSM networks accounted for more than 75% of the worldwide cellular network
market, serving 1.5 billion subscribers. In 2005 the first HSDPA capable network also became
operational. The first HSUPA network was launched in 2007. High-Speed Packet Access
(HSPA) and its uplink and downlink versions are 3G technologies, not part of GSM. Worldwide
GSM subscribers exceeded three billion in 2008.
The GSM Association estimated in 2010 that technologies defined in the GSM standard serve
80% of the global mobile market, encompassing more than 5 billion people across more than 212
countries and territories, making GSM the most ubiquitous of the many standards for cellular
networks.
It is important to note that GSM is a second-generation (2G) standard employing Time-Division
Multiple-Access (TDMA) spectrum-sharing, issued by the European Telecommunications
Standards Institute (ETSI). The GSM standard does not include the 3G UMTS CDMA-based
technology nor the 4G LTE OFDMA-based technology standards issued by the 3GPP.
Macau planned to phase out its 2G GSM networks as of June 4, 2015, making it the first region
to decommission a GSM network.
www.studymafia.org
GSM - Specification
Specifications for different Personal Communication Services (PCS) systems vary among the
different PCS networks. The GSM specification is listed below with important characteristics.
Modulation:
Modulation is a form of change process where we change the input information into a suitable
format for the transmission medium. We also changed the information by demodulating the
signal at the receiving end.
The GSM uses Gaussian Minimum Shift Keying (GMSK) modulation method.
Access Methods:
Because radio spectrum is a limited resource shared by all users, a method must be devised to
divide up the bandwidth among as many users as possible.
GSM chose a combination of TDMA/FDMA as its method. The FDMA part involves the
division by frequency of the total 25 MHz bandwidth into 124 carrier frequencies of 200 kHz
bandwidth.
One or more carrier frequencies are then assigned to each BS. Each of these carrier frequencies
is then divided in time, using a TDMA scheme, into eight time slots. One time slot is used for
transmission by the mobile and one for reception. They are separated in time so that the mobile
unit does not receive and transmit at the same time.
Transmission Rate:
The total symbol rate for GSM at 1 bit per symbol in GMSK produces 270.833 K
symbols/second. The gross transmission rate of the time slot is 22.8 Kbps.
GSM is a digital system with an over-the-air bit rate of 270 kbps.
Frequency Band:
The uplink frequency range specified for GSM is 933 - 960 MHz (basic 900 MHz band only).
The downlink frequency band 890 - 915 MHz (basic 900 MHz band only).
Channel Spacing:
This indicates separation between adjacent carrier frequencies. In GSM, this is 200 kHz.
Speech Coding:
www.studymafia.org
GSM uses linear predictive coding (LPC). The purpose of LPC is to reduce the bit rate. The LPC
provides parameters for a filter that mimics the vocal tract. The signal passes through this filter,
leaving behind a residual signal. Speech is encoded at 13 kbps.
Duplex Distance:
The duplex distance is 80 MHz. Duplex distance is the distance between the uplink and downlink
frequencies. A channel has two frequencies, 80 MHz apart.
Misc:
www.studymafia.org
Short Text Messages:
SMS (Short Messaging Service) service is a text messaging which allow you to send and receive
text messages on your GSM Mobile phone. Services available from many of the world's GSM
networks today - in addition to simple user generated text message services - include news, sport,
financial, language and location based services, as well as many early examples of mobile
commerce such as stocks and share prices, mobile banking facilities and leisure booking
services.
Supplementary Services
Supplementary services are provided on top of teleservices or bearer services, and include
features such as caller identification, call forwarding, call waiting, multi-party conversations, and
barring of outgoing (international) calls, among others. A brief description of supplementary
services is given here:
www.studymafia.org
routing of calls. So, GSM devised some flexible services that enable the subscriber to
conditionally bar calls.
Number Identification: There are following supplementary services related to number
identification:
o Calling Line Identification Presentation: This service deals with the
presentation of the calling party's telephone number. The concept is for this
number to be presented, at the start of the phone ringing, so that the called person
can determine who is ringing prior to answering. The person subscribing to the
service receives the telephone number of the calling party.
o Calling Line Identification Restriction: A person not wishing their number to
be presented to others subscribes to this service. In the normal course of event, the
restriction service overrides the presentation service.
o Connected Line Identification Presentation: This service is provided to give
the calling party the telephone number of the person to whom they are connected.
This may seem strange since the person making the call should know the number
they dialled, but there are situations (such as forwardings) where the number
connected is not the number dialled. The person subscribing to the service is the
calling party.
o Connected Line Identification Restriction: There are times when the person
called does not wish to have their number presented and so they would subscribe
to this person. Normally, this overrides the presentation service.
o Malicious Call Identification: The malicious call identification service was
provided to combat the spread of obscene or annoying calls. The victim should
subscribe to this service, and then they could cause known malicious calls to be
identified in the GSM network, using a simple command. This identified number
could then be passed to the appropriate authority for action. The definition for this
service is not stable.
Advice of Charge (AoC): This service was designed to give the subscriber an indication
of the cost of the services as they are used. Furthermore, those Service Providers who
wish to offer rental services to subscribers without their own Subscriber Identity Module
(SIM) can also utilize this service in a slightly different form. AoC for data calls is
provided on the basis of time measurements.
Closed User Groups (CUGs): This service is provided on GSM to enable groups of
subscribers to only call each other. This type of services are being offered with special
discount and is limited only to those members who wish to talk to each other.
Unstructured supplementary services data (USSD): This allows operator-defined
individual services.
www.studymafia.org
GSM - Architecture
The GSM technical specifications define the different elements within the GSM network
architecture. It defines the different elements and the ways in which they interact to enable the
overall system operation to be maintained.
The GSM network architecture is now well established and with the other later cellular systems
now established and other new ones being deployed, the basic GSM network architecture has
been updated to interface to the network elements required by these systems.
Despite the developments of the newer systems, the basic GSM system architecture has been
maintained, and the network elements described below perform the same functions as they did
when the original GSM system was launched in the early 1990s.GSM network architecture
elements
The GSM network architecture as defined in the GSM specifications can be grouped into four
main areas:
The different elements of the GSM network operate together and the user is not aware of the
different entities within the system.
A basic diagram of the overall GSM system architecture with these four major elements is shown
below:
www.studymafia.org
Mobile station
Mobile stations (MS), mobile equipment (ME) or as they are most widely known, cell or mobile
phones are the section of a GSM cellular network that the user sees and operates. In recent years
their size has fallen dramatically while the level of functionality has greatly increased. A further
advantage is that the time between charges has significantly increased.
There are a number of elements to the cell phone, although the two main elements are the main
hardware and the SIM.
The hardware itself contains the main elements of the mobile phone including the display, case,
battery, and the electronics used to generate the signal, and process the data receiver and to be
transmitted. It also contains a number known as the International Mobile Equipment Identity
(IMEI). This is installed in the phone at manufacture and "cannot" be changed. It is accessed by
the network during registration to check whether the equipment has been reported as stolen.
The SIM or Subscriber Identity Module contains the information that provides the identity of the
user to the network. It contains are variety of information including a number known as the
International Mobile Subscriber Identity (IMSI).
www.studymafia.org
Base Station Subsystem (BSS)
The Base Station Subsystem (BSS) section of the GSM network architecture that is
fundamentally associated with communicating with the mobiles on the network. It consists of
two elements:
Base Transceiver Station (BTS): The BTS used in a GSM network comprises the
radio transmitter receivers, and their associated antennas that transmit and receive to
directly communicate with the mobiles. The BTS is the defining element for each cell.
The BTS communicates with the mobiles and the interface between the two is known as
the Um interface with its associated protocols.
Base Station Controller (BSC): The BSC forms the next stage back into the GSM
network. It controls a group of BTSs, and is often co-located with one of the BTSs in its
group. It manages the radio resources and controls items such as handover within the
group of BTSs, allocates channels and the like. It communicates with the BTSs over what
is termed the Abis interface.
Mobile Switching services Centre (MSC): The main element within the core network
area of the overall GSM network architecture is the Mobile switching Services Centre
(MSC). The MSC acts like a normal switching node within a PSTN or ISDN, but also
provides additional functionality to enable the requirements of a mobile user to be
supported. These include registration, authentication, call location, inter-MSC handovers
and call routing to a mobile subscriber. It also provides an interface to the PSTN so that
calls can be routed from the mobile network to a phone connected to a landline.
Interfaces to other MSCs are provided to enable calls to be made to mobiles on different
networks.
Home Location Register (HLR): This database contains all the administrative
information about each subscriber along with their last known location. In this way, the
GSM network is able to route calls to the relevant base station for the MS. When a user
switches on their phone, the phone registers with the network and from this it is possible
to determine which BTS it communicates with so that incoming calls can be routed
appropriately. Even when the phone is not active (but switched on) it re-registers
periodically to ensure that the network (HLR) is aware of its latest position. There is one
HLR per network, although it may be distributed across various sub-centres to for
operational reasons.
Visitor Location Register (VLR): This contains selected information from the HLR
that enables the selected services for the individual subscriber to be provided. The VLR
can be implemented as a separate entity, but it is commonly realised as an integral part of
the MSC, rather than a separate entity. In this way access is made faster and more
convenient.
www.studymafia.org
Equipment Identity Register (EIR): The EIR is the entity that decides whether a given
mobile equipment may be allowed onto the network. Each mobile equipment has a
number known as the International Mobile Equipment Identity. This number, as
mentioned above, is installed in the equipment and is checked by the network during
registration. Dependent upon the information held in the EIR, the mobile may be
allocated one of three states - allowed onto the network, barred access, or monitored in
case its problems.
Authentication Centre (AuC): The AuC is a protected database that contains the secret
key also contained in the user's SIM card. It is used for authentication and for ciphering
on the radio channel.
Gateway Mobile Switching Centre (GMSC): The GMSC is the point to which a ME
terminating call is initially routed, without any knowledge of the MS's location. The
GMSC is thus in charge of obtaining the MSRN (Mobile Station Roaming Number) from
the HLR based on the MSISDN (Mobile Station ISDN number, the "directory number" of
a MS) and routing the call to the correct visited MSC. The "MSC" part of the term
GMSC is misleading, since the gateway operation does not require any linking to an
MSC.
SMS Gateway (SMS-G): The SMS-G or SMS gateway is the term that is used to
collectively describe the two Short Message Services Gateways defined in the GSM
standards. The two gateways handle messages directed in different directions. The SMSGMSC (Short Message Service Gateway Mobile Switching Centre) is for short messages
being sent to an ME. The SMS-IWMSC (Short Message Service Inter-Working Mobile
Switching Centre) is used for short messages originated with a mobile on that network.
The SMS-GMSC role is similar to that of the GMSC, whereas the SMS-IWMSC
provides a fixed access point to the Short Message Service Centre.
www.studymafia.org
GSM Network Areas:
In a GSM network, the following areas are defined:
Cell: Cell is the basic service area: one BTS covers one cell. Each cell is given a Cell
Global Identity (CGI), a number that uniquely identifies the cell.
Location Area: A group of cells form a Location Area. This is the area that is paged
when a subscriber gets an incoming call. Each Location Area is assigned a Location Area
Identity (LAI). Each Location Area is served by one or more BSCs.
MSC/VLR Service Area: The area covered by one MSC is called the MSC/VLR service
area.
PLMN: The area covered by one network operator is called PLMN. A PLMN can
contain one or more MSCs.
Advantages
Worldwide Roaming
Since GSM service is obtainable in added than 200 countries, clienteles are capable to roam
globally without altering their devices or their facility plans. Messaging facilities and other
progressive services, such as data, too endure obtainable. Cellular businesses sort partnership
contracts with suppliers overseas, so businesses are capable to roam globally at reduced roaming
charges.
Security
GSM facilities are extremely protected, with skills in place that can defend against both snooping
and service riding. GSM devices and facilities cannot be duplicated as simply as other skills. The
SIM card or Subscriber recognize Unit card which transmits subscriber and exchange info,
secures purchaser info. These cards also permit consumers to handover their subscription info
and telephone book info from one receiver to add at any period.
Reasonable Devices and Facilities
GSM suppliers switch a huge portion of the cellular marketplace and so are capable to deliver a
huge diversity of reasonable devices and facilities. Constructors are capable to afford numerous
diverse kinds of devices for reasonable values since the huge capacity of purchases aids to
energy down the trade costs. The change of strategies and facilities request to consumers as well,
since they need to try the latest and maximum exciting yields.
Extensive Spectrums Obtainable
www.studymafia.org
The GSM expertise usages five bands of MHz rate; 450, 850, 900, 1800 and 1900 MHz. Builders
are capable to yield devices that can choice up two or three diverse occurrence bands. Those
receivers can then shift between those rates routinely as desirable, in order to preserve a network
linking almost wherever. The signals obtainable with GSM facility are effectual, meaning that an
excessive deal of data can transfer diagonally the frequency bands without dipping the efficiency
of the signs.
Disadvantages
Released and Missed Calls
Conferring to Cellular Newscast, call superiority difficulties, with dropped calls and missed calls
are shared difficulties with GSM expertise. These difficulties outcome right from the expertise in
use. GSM expertise cannot provide accommodations as numerous callers on a lone cell tower as
the more current CDMA technology.
Safety Issues
ZDNet UK rumors that GSM has a grave safety flaw, established by a hacker who was capable
to interrupt telephone calls from an amount of GSM-based cellular headphones. The tricky is
founded right on the technology conferring to this hacker and the key was to shot off the GSM
technology that is normally recovered by individuals all over the universe.
Competence
Added tricky with GSM is a system problem somewhat than a customer problem, though it is a
customer tricky for those who dont need to see a creation of cellular towers. As earlier eminent,
GSM technologies can knob rarer callers on a lone cellular tower.
www.studymafia.org
Conclusion
Hope, now you are aware of GSM Technology. We have taught you all the basic concepts
related to GSM technology.
You have learnt about GSM basic overview, its architecture along with a description about all
important GSM elements and a brief GSM specification. You have gone through all the
important GSM Addresses and Identifiers also.
Further, we have given a short description of GSM protocol stack and available GSM services
and their billing techniques.
Reference
www.google.com
www.wikipedia.com
www.studymafia.org