Scribd Logo
Upload

Welcome to Scribd!

  • 38 views

    Rwprorox SL 960

    Uploaded by

    wassim nasri
    ProRox WM 988 is a heavy duty wired mat insulation suitable for high temperature industrial applications like steam pipes and furnaces. It is available in thicknesses from 40-80mm and lengths from 1500-6000mm. The mat has a stone wool core stitched to a galvanized steel mesh. It provides thermal and heat resistance up to 750°C. ProRox WM 988 meets various international standards and can be installed on pipes and vessels with appropriate supports and cladding.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Rwprorox SL 960

    Uploaded by

    wassim nasri
    38 views2 pages
    ProRox WM 988 is a heavy duty wired mat insulation suitable for high temperature industrial applications like steam pipes and furnaces. It is available in thicknesses from 40-80mm and lengths from 1500-6000mm. The mat has a stone wool core stitched to a galvanized steel mesh. It provides thermal and heat resistance up to 750°C. ProRox WM 988 meets various international standards and can be installed on pipes and vessels with appropriate supports and cladding.

    Original Title

    Rwprorox Sl 960

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    ProRox WM 988 is a heavy duty wired mat insulation suitable for high temperature industrial applications like steam pipes and furnaces. It is available in thicknesses from 40-80mm and lengths from 1500-6000mm. The mat has a stone wool core stitched to a galvanized steel mesh. It provides thermal and heat resistance up to 750°C. ProRox WM 988 meets various international standards and can be installed on pipes and vessels with appropriate supports and cladding.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    38 views2 pages

    Rwprorox SL 960

    Uploaded by

    wassim nasri
    ProRox WM 988 is a heavy duty wired mat insulation suitable for high temperature industrial applications like steam pipes and furnaces. It is available in thicknesses from 40-80mm and lengths from 1500-6000mm. The mat has a stone wool core stitched to a galvanized steel mesh. It provides thermal and heat resistance up to 750°C. ProRox WM 988 meets various international standards and can be installed on pipes and vessels with appropriate supports and cladding.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Technical Insulation

    ProRox WM 988 Heavy duty wired mat

    Dimensions

    Standard Width: 600 mm Standard Width: 1200 mm

    Thickness (mm) Length (mm) Thickness (mm) Length (mm)


    40 6000 40 6000
    50 5000 50 5000
    60 4000 60 4000
    75 4000 75 4000
    80 1500 80 1500

    Applications Installation guidelines


    ProRox WM 988 is a lightly bonded heavy Assembly Support construction
    duty stone wool mat stitched on galvanised Cut the wired mat to length, so that the mat Given the limited pressure resistance of wired
    wired mesh with galvanised wire. The wired fits the pipe with slight pre-stressing. The mats, in most cases a support is required for
    mat is especially suitable for industrial closing joints must be staggered at an angle the board cladding. As a guideline, assume
    applications such as high-pressure steam of at least 30 degrees to each other. The that a support is required every 3 to 4 metres.
    pipes, reactors, furnaces, etc. where high closing joints of the mats (lengthwise and
    extreme demands are made on the circular joints) must be wired together using Finishing
    temperature resistance of the insulation. e.g. steel wire (min. 0.5 mm) or secured with The insulation should be finished with a metal
    Stainless steel mesh, stainless steel binding mat hooks. Stainless steel pipes and pipes (e.g. aluminium) cladding. Where necessary,
    wire and/or aluminium foil facing are with a temperature of >400°C should expansion joints are provided to cater for
    available upon request. preferably be insulated with ProRox WM 970, expansion of the pipes. Both the lengthwise
    in which both the mesh and the stitching wire and circular joints are fastened with sheet-
    Compliance is in stainless steel. If the mats are assembled metal screws: hard aluminium or stainless
    ProRox WM 988 Wired Mats fully comply in multiple layers, both the lengthwise and steel 1/2”, 8/metre. Close the expansion
    with the requirements as set by circular joints must be staggered (‘masonry joints with a steel tensioning wire.
    internationally recognized standards like bond’). Connections to mountings, head and end
    CINI 2.2.02, ASTM C592 Type I, II, III and IS caps, etc. should be made watertight using a
    8183. suitable sealant.

    ProRox Product Catalogue


    22
    Technical Insulation

    ProRox WM 988 Heavy duty wired mat

    Note Advantages
    All steel components exposed to a Suitable for heavy duty applications which are exposed to high temperatures and
    corrosive environment should be high mechanical loads
    cleaned, de-greased and coated with Resistant to high temperatures
    a protective finish. Flexible application
    Available in a wide range of thicknesses
    Suitable for use over stainless steel

    Product properties1

    Properties Performance Standard


    Mean Temp (°C) 50 100 150 200 250 300
    Thermal Conductivity2 λ (W/mK) 0.038 0.043 0.048 0.055 0.064 0.076 ASTM C177
    λ (W/mK) 0.039 0.047 0.055 0.064 0.075 0.086 IS 3346

    Nominal Density 150 kg/m³ ASTM C167/ IS 3144


    No visible deterioration of the fibrous structure.
    Heat Resistance IS 3144
    No evidence of self heating. No fusion of fibers at 750°C
    Maximum Service
    750°C ASTM C411/C447
    Temperature
    Linear Shrinkage Less than 2% (at max service temperature) ASTM C356
    Incombustibility <5 wt% IS 3144
    EuroClass A1
    EN 13501-1
    Reaction to Fire Surface burning characteristics;
    ASTM E84
    Flame spread = passed, Smoke development = passed
    pH 7-10 IS 3144
    Less than 10 ppm
    Water Leachable ASTM C871/ IS 3144
    Conforms to the stainless steel corrosion specification
    Chloride Content ASTM C692/C871
    as per ASTM C795
    Sulphur Content < 0.3 vol% IS 3144
    Water Absorption Less than 1 kg/m² EN 1609
    ASTM C1104/C1104M
    Moisture Absorption Less than 1% weight
    IS 3144
    > 250μm < 8 wt%
    Shot Content IS 3144
    > 500μm <3 wt%

    Note: 1. All information and data for technical parameters are based on laboratory testing.
    2. Nominal values.

    ProRox Product Catalogue


    23

    You might also like