Scribd Logo
Upload

Welcome to Scribd!

  • 140 views

    User's Guide For TV Board V59

    Uploaded by

    chack
    This document provides instructions for connecting and configuring a TV board. It describes how to connect LVDS cables, set voltage jumpers, refresh firmware from a USB drive, enter factory mode to set the LVDS map number to match the LCD panel, and change the input source using either a remote controller or keyboard. The instructions include steps to follow and images to illustrate proper connections and settings.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    User's Guide For TV Board V59

    Uploaded by

    chack
    140 views23 pages
    This document provides instructions for connecting and configuring a TV board. It describes how to connect LVDS cables, set voltage jumpers, refresh firmware from a USB drive, enter factory mode to set the LVDS map number to match the LCD panel, and change the input source using either a remote controller or keyboard. The instructions include steps to follow and images to illustrate proper connections and settings.

    Original Description:

    Guide Board V59

    Original Title

    User's Guide for TV Board V59

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for connecting and configuring a TV board. It describes how to connect LVDS cables, set voltage jumpers, refresh firmware from a USB drive, enter factory mode to set the LVDS map number to match the LCD panel, and change the input source using either a remote controller or keyboard. The instructions include steps to follow and images to illustrate proper connections and settings.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    140 views23 pages

    User's Guide For TV Board V59

    Uploaded by

    chack
    This document provides instructions for connecting and configuring a TV board. It describes how to connect LVDS cables, set voltage jumpers, refresh firmware from a USB drive, enter factory mode to set the LVDS map number to match the LCD panel, and change the input source using either a remote controller or keyboard. The instructions include steps to follow and images to illustrate proper connections and settings.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 23

    User’s Guide for TV Board V59

    Chapter 1--LVDS Cable Connection................................................................................................. 1


    Chapter 2--Voltage Jumper ............................................................................................................... 4
    Chapter 3--Refresh firmware ............................................................................................................ 5
    Chapter 4--Enter into Factory Mode and set LVDS Map number .................................................. 10
    Chapter 5--Change the input source via remote controller ............................................................. 17
    Chapter 6--Change the input source via keyboard .......................................................................... 19
    http://stores.ebay.com/elecrealm/

    Chapter 1--LVDS Cable Connection

    Please check the inserting condition of each foot. If some foot is not fully inserted (as
    shown in the figure below), please use tweezers to press the exposure to the top of the
    foot, let all feet be inserted into well.

    1 / 23
    http://stores.ebay.com/elecrealm/

    2 / 23
    http://stores.ebay.com/elecrealm/

    3 / 23
    http://stores.ebay.com/elecrealm/

    Chapter 2--Voltage Jumper

    4 / 23
    http://stores.ebay.com/elecrealm/

    Chapter 3--Refresh firmware


    1. Please Prepare USB 2.0 Flash Memory Driver disk.

    2. Please select the suitable firmware according to the resolution of your


    LCD panel.

    5 / 23
    http://stores.ebay.com/elecrealm/

    3. Please copy the firmware to the USB 2.0 Flash Memory Driver disk.
    Make sure it only has one firmware file that you need refresh.

    4. Plug in USB 2.0 Flash Memory Driver disk to the USB port of
    controller Board.

    6 / 23
    http://stores.ebay.com/elecrealm/

    5. Plug in 12V DC Power Supply.

    6. Wait a moment. You will see the Led becomes red and then becomes
    green. The Led will be flicker between red and green. The LED light

    7 / 23
    http://stores.ebay.com/elecrealm/
    is always in the blue after finishing the refresh of the firmware.

    7. Unplug the power supply from the driver board. Then connect the

    8 / 23
    http://stores.ebay.com/elecrealm/
    LVDS cable and the LCD panel. Then plug the power to the power
    input again. Turn on the power by keyboard or Remote controller.
    8. Then you will see the controller board can work with the LCD panel.

    9 / 23
    http://stores.ebay.com/elecrealm/

    Chapter 4--Enter into Factory Mode and


    set LVDS Map number
    If the LCD panel displays the image as below, the LVDS map should
    be changed. The operation only can be finished via the remote
    controller.

    1. Press the “menu” button on the remote controller.

    10 / 23
    http://stores.ebay.com/elecrealm/

    2. Then press number “1” “1” “4” “7” .

    11 / 23
    http://stores.ebay.com/elecrealm/

    12 / 23
    http://stores.ebay.com/elecrealm/

    3. The LCD panel will display the following image:

    4. Press “up/down” on the remote controller so that the cursor moves to


    “LVDS Map”.

    13 / 23
    http://stores.ebay.com/elecrealm/

    5. Press “left/right--right” and go into LVDS Map. Then press “left/right”


    and change the LVDS Map number to the proper number, the LCD
    panel will go to the normal picture.

    14 / 23
    http://stores.ebay.com/elecrealm/

    15 / 23
    http://stores.ebay.com/elecrealm/

    16 / 23
    http://stores.ebay.com/elecrealm/

    Chapter 5--Change the input source via


    remote controller

    17 / 23
    http://stores.ebay.com/elecrealm/

    18 / 23
    http://stores.ebay.com/elecrealm/

    Chapter 6--Change the input source via


    keyboard

    19 / 23
    http://stores.ebay.com/elecrealm/

    20 / 23
    http://stores.ebay.com/elecrealm/

    21 / 23
    http://stores.ebay.com/elecrealm/

    22 / 23

    You might also like