How To Ram Clear Equinox DFDC V3

Download as pdf or txt
Download as pdf or txt
You are on page 1of 11

How to RAM Clear Equinox DFDC

Steps in on how to Ram Clear Equinox

 Turn o the machine


 Remove the logic door
 Turn on the machine wait to load

 Press the button in IO board to initiate the ram clear procedure.


 This will show, choose collect to clear the settings

 Choose Reserve if you want to load the current settings.


Note: Configuration will be given by the operations.

JURISDICTION SPECIFIC SETUP

 Set to Macau

CURRENCY CONFIGURATION

 Currency - US USD/Australia AUD


 Currency Base-Units -100
 Currency Token- Configurable
 Configurable Token - $00000000.02

STANDARD MACHINE SETUP

 Set Gamble to Zero 00


 Enter the serial number found on the sides of the machine
HARDWARE SECURE SETUP

 If tower lights are installed, choose two-tier, if not set to None

EGM SECURE SETUP

 Set the Base Denomination to 0.02

GAME SECURE SETUP

 Set the variation to 89


 Choose English & Simplified Chinese for supported language.
 Default will be English.
SAS SECURE SETUP

 Set Poll Address for Port 1 – 000001


 Set Poll Address for Port 2

Note: Poll Address for Port 2 will change depending on the Jackpot controller used and ports to use.

MBOX- 000001 (always)


Pala 5-

In
Paltronic Group 1
1 2 3 30
Controller …
Out In Out In Out In

 Money Transfer – AFT


 AFT Partial transfer to EGM – Disable
 AFT Bonus Transfer – Enable
 Asset Number – Machine ID
 Accumulated Credit Limit – $00100000.00
 Legacy Bonusing – Enable
 Ticket Validation - None
 Hand pay Receipt - Disable
 LP Group – 001
 Jackpot Limit - $40000000.00
 Tournament - Disable
 Set SAS Version – SAS 6.02
 SAS Accounting in cents - Enable
 Host hand pay Reset – Disable
 Allow cancel credit in soft host Cash out Mode- Enable

SAS Connection:

To Jackpot Set up (Pala 5, UBOX


SAS COM Cable to
MBox, etc..) UBOX
BANKNOTE ACCEPTOR SETUP

 Disable the bill acceptor.

REAL TIME CLOCK SETUP

 Update to the latest date and time.

JACKPOT CONFIGURATION
SAS COMMS SETUP

 Always enable

TWO CHANNEL SETUP


SAS Logic:

1
2

To Jackpot Set up (Pala 5, SAS COM Cable to


MBox, etc..) UBOX

UBOX
Note: Always enter the value for LP Group

You might also like