Scribd Logo
Upload

Welcome to Scribd!

  • 216 views

    Quick Tip: Serial Protocol Converter 2.5 (SPC2.5) Quick Reference

    Uploaded by

    Sergio Augusto Correa Fierro

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Quick Tip: Serial Protocol Converter 2.5 (SPC2.5) Quick Reference

    Uploaded by

    Sergio Augusto Correa Fierro
    216 views2 pages

    Original Title

    SPC_2.5_quick_reference_Comm

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    216 views2 pages

    Quick Tip: Serial Protocol Converter 2.5 (SPC2.5) Quick Reference

    Uploaded by

    Sergio Augusto Correa Fierro

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Quick Tip

    Aristocrat® Technologies, Inc. Quick Tip

    Serial Protocol Converter 2.5 (SPC2.5) Quick Reference


    This document provides a quick reference of the SPC2.5 board. For a complete technical reference, see
    Aristocrat document no. 20-00420, Serial Protocol Converter (SPC2.5) Guidebook.

    Ports RAM Clear


    Port Description Step Description
    P1 Not used 1. Insert link on jumper J8.
    P2 EGM Connections 2. Power up the board (quick flashing of the
    LED).
    P3 Secondary System Port 3. Remove link on jumper J8.
    P4 Primary System Port 4. Remove power form the SPC board
    Port Description 5. Power up the SPC board.
    J5 5 Volts not used on Aristocrat MKVI™ NOTE: Normal operation indicated by
    and new GEN7™ VIRIDIAN™. LED flashing 5-times per second.
    J3 24 Volts from backplane or audio
    amplifier.

    23 Oct 2009 QT-00044-00 1 of 2


    This document contains confidential information that is proprietary to Aristocrat. It may not be copied or disclosed to unauthorized
    parties. © 2009 Aristocrat Technologies Australia Pty Limited. All rights reserved.
    Aristocrat® Technologies, Inc. Technical Notes

    LED Pulse Codes


    Pulse Rate Description
    5-times per second SPC2.5 operating normally
    10-times per second Non-volatile memory has been cleared. Remove jumper from CLR (J8) and
    power cycle SPC2.5
    Pulsing one time Communication is down on port 2
    Pulsing two times Communication is down on port 3
    Pulsing three times Communication is down on port 4
    Pulsing four times Non-volatile memory is not initialized correctly. Clear non-volatile memory
    before continuing.
    Pulsing five times Bad Configuration of the SAS address ID on primary/secondary port.
    NOTE: Normal operation indicated by LED flashing 5-times per second.

    Jumpers
    Jumper Configuration Description
    J4 (WD) In (insert link) Enables the watch dog timer on the board.
    J8 (CLR) Out (remove Link Used to manually clear the non-volatile RAM on power-up if the
    jumper is “In” (LED flashes 5-times per second after memory
    cleared.)
    J9 In/Out On games for the N. Carolina Cher Jurisdiction, this jumper should
    be in (insert link).

    Port 1 and 2 Pins Port 3 and 4 Pins


    Pin Function I/O Optional Function Pin Function I/O Optional Function
    2 TxD O Transmit data out 1 CTS 1 CTS Clear to send
    3 RxD I Receive data in 2 TxD O Transmit data out
    5 Ground 3 RxD I Receive data in
    4 RTS O Request to send
    5 Ground

    J9 (Lockout) Pins J8 (General Purpose) Pins


    Pin Function I/O Optional Function Pin Function I/O Optional Function
    1 GPIO 7 I/O Shared with J10 pin 7 1 PGIO 1 I/O Shared with J10 pin
    1
    2 GPIO 8 I/O Shared with J10 pin 8 2 GPIO 8 I/O Shared with J10 pin
    2

    Caution: Power must only be supplied in the range from 8 to 24 volts through
    connector J3. Do not use 5 volts through connector J5, as communications loss
    and stability problems will result.

    Questions concerning this quick tip should be directed to the Aristocrat Technologies, Inc., National Service Support
    Center at 1-800-482-3723 or [email protected]

    23 Oct 2009 QT-00044-00 2 of 2


    This document contains confidential information that is proprietary to Aristocrat. It may not be copied or disclosed to unauthorized
    parties. © 2009 Aristocrat Technologies Australia Pty Limited. All rights reserved.

    You might also like