www.DrakeChillers.

com

AIR-COOLED CHILLERS

SCROLL
PACKAGED & SPLIT-SYSTEMS

1 to 52
R407C Nominal Tons

EPA COMPLIANT Call: (888) 289-7299

 TABLE OF CONTENTS

Nomenclature 3

Selection Procedure 4

12S - 60S Chillers - Capacity Table 5

Along with a complete line of
standard products that Drake 70S - 380S Chillers - Capacity Table 6
Refrigeration, Inc. offers, we
also have the ability to custom 72D - 180D Chillers - Capacity Table 7
build units to each customers
particular needs. 240D - 760D Chillers - Capacity Table 8

Please contact the factory or your Microprocessor Features 9

Drake representative for a special
application. PAC & PACT - Features and Options 10

PAC Single Circuit - Dimensional and Electrical Specifications 11

PAC Dual Circuit - Dimensional and Electrical Specifications 12

PACT - Dimensional and Electrical Specifications 13

ES & EST - Features and Options 14

ES Single Circuit - Dimensional and Electrical Specifications 15

ES Dual Circuit - Dimensional and Electrical Specifications 16

EST - Dimensional and Electrical Specifications 17

PAC & PACT Schematical Drawings 18

Due to manufacturers’s policy of continu-

ous product improvement, the manufacturer ES & EST Schematical Drawings 19
reserves the right to make changes without
notice. Drawings in this booklet are represen-
tations of the equipment shown. Contact the
factory for specific unit drawings.
CS - Dimensional Specifications 20

© 2009 Drake Refrigeration, Inc. Tank Section - Dimensional Specifications, Features and Options 21
All rights reserved.

Glycol Factor Tables 22

 NOMENCLATURE

Example: P AC T 30 S 3 - T3 - Z

P P = Packaged ES = Evaporator Section CS = Condenser Section Low ambient, or lower leaving

water temperatures, can require
the recirculation of gycol solu-
AC AC = Air-Cooled Condenser
tions or other fluid blends.

T T = Tank Model
These solutions can effect unit
capacities. Please consult the
30 Nominal Capacity MBTUH Ex. 12 = 12,000 BTUH, etc. factory on these or other special
applications for proper sizing.
S S = Single Circuit Unit D = Dual Circuit Unit M = Three Circuit Unit

3 1 = R134a 3= R407C 6 = R404A, R507

T3 Electrical Requirement S2 = 208/230-1-60 S6 = 220-1-50

T3 = 208/230-3-60 T7 = 200/208-3-50
S4 = 460-1-60 T9 = 380-3-50
T4 = 460-3-60
T5 = 575-3-60

Z Compressor Type Z = Scroll

Drake Refrigeration, Inc.

2900 Samuel Drive • Bensalem, PA 19020
(888) 289-7299
Phone (215) 638-5515
Fax (215) 638-5518 3
www.drakechillers.com
 SELECTION PROCEDURE

AIR-COOLED SELECTION PROCEDURES

To properly select an air-cooled packaged chiller, the following information must be

known:

1. The required cooling capacity, BTUH.

2. Delta T of entering and leaving fluid temperatures.
3. Fluid factor (ex. water = 500).
4. GPM of process fluid to be circulated.
5. Design ambient air temperature.

If you know any three of the items 1 through 4 above, you can calculate the fourth by
using the formulas below.

For 100% water:

Cooling capacity (in BTUH) = GPM x Delta T x 500

Consult factory on sizing
GPM = Capacity (in BTUH)
chillers with glycol or any
Delta T x 500
fluid other than water.
Delta T = Capacity (in BTUH)
GPM x 500

Sample selection:

Select an air-cooled, packaged chiller to cool 6.5 GPM of 100% water from 54°F
to 44°F. Design ambient air temperature 95°F.

Find:

Air-cooled chiller model.

Solution:

1. Chilled fluid Delta T = 54°F - 44°F = 10°F

2. Capacity (in BTUH) = 6.5 GPM x 10°F Delta T x 500 = 32,500 BTUH
3. From the PAC chiller capacity tables, it can be determined that the
PAC30S has the capacity to meet the requirements.

4
 12S - 60S SCROLL CHILLERS Capacity Table

LWT 80 90 95 100 105

MODEL COMPRESSOR °F TONS KW EER TONS KW EER TONS KW EER TONS KW EER TONS KW EER

42.0 1.3 1.2 9.1 1.2 1.3 8.0 1.2 1.4 7.5 1.2 1.5 7.0 1.1 1.6 6.6
44.0 1.3 1.2 9.3 1.2 1.3 8.3 1.2 1.4 7.7 1.2 1.5 7.2 1.2 1.6 6.8
12S ZR16KCE
45.0 1.3 1.2 9.5 1.3 1.3 8.4 1.2 1.4 7.8 1.2 1.5 7.3 1.2 1.6 6.9
50.0 1.5 1.2 10.3 1.4 1.3 9.2 1.4 1.4 8.5 1.3 1.5 8.0 1.3 1.6 7.5

42.0 1.8 1.6 9.9 1.7 1.8 8.6 1.6 1.9 7.9 1.6 2.0 7.3 1.5 2.2 6.8
44.0 1.8 1.6 10.3 1.7 1.8 8.9 1.7 1.9 8.2 1.6 2.1 7.6 1.6 2.2 7.1
18S ZB15KCE
45.0 1.9 1.6 10.5 1.8 1.8 9.1 1.7 1.9 8.4 1.7 2.1 7.8 1.6 2.2 7.3
50.0 2.0 1.6 11.4 2.0 1.8 10.0 1.9 2.0 9.2 1.8 2.1 8.6 1.8 2.2 8.0

42.0 2.1 1.7 11.0 1.9 2.0 9.4 1.9 2.1 8.7 1.8 2.2 8.0 1.8 2.4 7.3
44.0 2.2 1.8 11.5 2.0 2.0 9.9 2.0 2.1 9.2 1.9 2.2 8.4 1.9 2.4 7.7
24S ZB19KCE
45.0 2.2 1.8 11.7 2.1 2.0 10.1 2.0 2.1 9.3 1.9 2.2 8.6 2.0 2.4 7.9
50.0 2.4 1.8 12.8 2.3 2.0 11.0 2.2 2.1 10.2 2.2 2.3 9.4 2.1 2.4 8.7

42.0 2.8 2.5 11.0 2.6 2.8 9.3 2.5 3.0 8.6 2.4 3.2 7.9 2.4 3.4 7.3
44.0 2.9 2.5 11.4 2.7 2.9 9.7 2.7 3.0 9.0 2.5 3.2 8.2 2.5 3.4 7.6
30S ZB26KCE
45.0 2.9 2.5 11.6 2.8 2.9 9.9 2.7 3.0 9.2 2.6 3.2 8.3 2.5 3.4 7.7
50.0 3.2 2.6 12.6 3.1 2.9 10.8 3.0 3.1 10.0 2.9 3.3 9.2 2.8 3.4 8.5

42.0 3.4 3.2 11.1 3.3 3.6 9.6 3.1 3.8 8.9 3.1 4.0 8.3 3.0 4.2 7.7
44.0 3.6 3.3 11.5 3.4 3.6 10.0 3.2 3.8 9.3 3.2 4.0 8.5 3.1 4.2 8.0
36S ZB30KCE
45.0 3.7 3.3 11.7 3.5 3.6 10.1 3.3 3.8 9.4 3.1 4.0 8.7 3 4.2 8.1
50.0 4.0 3.3 12.5 3.8 3.7 10.9 3.6 3.9 10.2 3.6 4.1 9.4 3.5 4.3 8.8

42.0 4.5 3.8 12.7 4.3 4.2 11.0 4.2 4.4 10.2 4.1 4.7 9.5 4.0 4.9 8.8
44.0 4.7 3.8 13.0 4.4 4.2 11.3 4.2 4.5 10.5 4.2 4.7 9.7 4.1 4.9 9.1
48S ZB38KCE
45.0 4.8 3.8 13.2 4.5 4.2 11.4 4.4 4.5 10.6 4.3 4.7 9.8 4.2 4.9 9.2
50.0 5.3 3.9 14.2 5.0 4.4 12.4 4.9 4.6 11.5 4.8 4.8 10.7 4.6 5.1 10.0

42.0 4.7 4.6 10.9 4.5 5.1 9.6 4.4 5.4 9.0 4.3 5.6 8.4 4.2 5.9 7.9
44.0 4.8 4.7 11.3 4.7 5.1 9.9 4.6 5.4 9.3 4.5 5.6 8.7 4.3 5.9 8.1
50S ZB42KCE
45.0 4.9 4.7 11.5 4.8 5.1 10.1 4.7 5.4 9.5 4.6 5.7 8.9 4.5 5.9 8.3
50.0 5.4 4.7 12.4 5.2 5.2 11.0 5.1 5.5 10.3 5.0 5.7 9.7 4.9 6.0 9.1

42.0 5.1 4.5 12.3 4.9 5.0 10.6 4.7 5.3 9.8 4.6 5.6 9.1 4.5 5.9 8.4
44.0 5.3 4.5 12.7 5.0 5.1 10.9 4.9 5.3 10.1 4.8 5.6 9.3 4.7 6.0 8.7
60S ZB45KCE
45.0 5.4 4.5 12.8 5.2 5.1 11.0 5.0 5.4 10.3 4.9 5.7 9.4 4.7 6.0 8.8
50.0 5.9 4.6 13.7 5.6 5.2 11.8 5.5 5.5 11.1 5.3 5.8 10.2 5.2 6.1 9.5

1. Capacities on this chart are based on refrigerant R407C. Low ambient or lower leaving water temperatures can require the use of a glycol solution or other fluid
blends. These solutions affect unit capacities. Please consult the factory on these or other special fluids.
2. KW input is for compressor(s) only.
3. EER = Energy Efficiency Ration (BTU/watt-hour). Power inputs include compressor(s), condenser fan motor(s) and control power.

Drake Refrigeration, Inc.

2900 Samuel Drive • Bensalem, PA 19020
(888) 289-7299
Phone (215) 638-5515
Fax (215) 638-5518 5
www.drakechillers.com
 Capacity Table 70S - 380S SCROLL CHILLERS

LWT 80 90 95 100 105

MODEL COMPRESSOR °F TONS KW EER TONS KW EER TONS KW EER TONS KW EER TONS KW EER

42.0 7.1 6.0 12.2 6.7 6.6 10.5 6.5 7.0 9.7 6.3 7.4 9.0 6.2 7.8 8.3
44.0 7.4 6.0 12.5 7.0 6.7 10.9 6.8 7.0 10.1 6.6 7.4 9.3 6.4 7.9 8.7
70S ZB58KCE
45.0 7.6 6.1 12.8 7.2 6.7 11.2 7.0 7.1 10.3 6.8 7.5 9.6 6.6 7.9 8.9
50.0 8.2 6.2 13.8 7.8 6.8 12.1 7.6 7.2 11.2 7.4 7.6 10.4 7.2 8.0 9.6

42.0 7.8 6.8 11.9 7.4 7.5 10.5 7.2 7.9 9.8 7.0 8.3 9.0 6.8 8.7 8.4
44.0 8.1 6.8 12.3 7.7 7.6 10.8 7.5 7.9 10.1 7.3 8.4 9.3 7.2 8.8 8.7
80S ZB66KCE
45.0 8.2 6.9 12.5 7.8 7.6 11.1 7.7 8.0 10.2 7.4 8.4 9.5 7.2 8.8 8.9
50.0 9.0 7.0 13.5 8.7 7.7 11.9 8.5 8.1 11.1 8.2 8.6 10.3 8.0 9.0 9.6

42.0 9.1 8.2 11.8 8.7 9.1 10.3 8.5 9.6 9.6 8.2 10.0 8.9 8.0 10.6 8.3
44.0 9.5 8.3 12.2 9.0 9.2 10.6 8.8 9.6 9.9 8.6 10.1 9.2 8.3 10.7 8.5
90S ZB76KCE
45.0 9.7 8.3 12.4 9.2 9.2 10.8 9.0 9.7 10.1 8.7 10.2 9.4 8.5 10.7 8.7
50.0 10.6 8.5 13.3 10.1 9.4 11.6 9.8 9.9 10.8 9.6 10.4 10.1 9.3 10.9 9.4

42.0 11.4 10.2 12.2 10.8 11.3 10.5 10.5 11.9 9.8 10.2 12.6 9.0 9.9 13.3 8.3
44.0 11.8 10.3 12.6 11.2 11.4 10.8 10.9 12.0 10.1 10.5 12.7 9.2 10.2 13.4 8.5
120S ZB95KCE
45.0 12.1 10.3 12.8 11.4 11.5 10.9 11.2 12.1 10.2 10.7 12.8 9.4 10.5 13.4 8.7
50.0 13.3 10.6 13.7 12.6 11.8 11.8 12.3 12.3 11.1 11.9 13.1 10.1 11.6 13.7 9.4

42.0 42.0 12.3 11.3 12.3 13.5 9.9 11.7 14.2 9.2 11.7 14.9 8.6 11.3 15.7 7.9
44.0 13.5 12.4 11.7 12.8 13.7 10.2 12.2 14.3 9.5 12.2 15.0 8.8 11.8 15.8 8.2
180S ZB114KCE
45.0 13.8 12.5 11.9 13.1 13.7 10.3 12.4 14.4 9.7 12.4 15.1 9.0 12.0 15.9 8.3
50.0 15.2 12.9 12.7 14.4 14.1 11.1 13.7 14.7 10.5 13.7 15.5 9.8 13.3 16.2 9.1

42.0 17.7 16.0 11.7 16.9 17.5 10.2 16.4 18.5 9.5 15.9 19.5 8.8 15.4 20.6 8.1
44.0 18.4 16.2 12.1 17.6 17.8 10.6 17.1 18.6 9.8 16.5 19.7 9.0 16.1 20.8 8.4
250S ZR250KCE
45.0 18.8 16.2 12.3 17.8 17.8 10.7 17.5 18.7 10.0 16.8 19.8 9.2 16.4 20.8 8.6
50.0 20.6 16.5 13.2 19.6 18.3 11.5 19.0 19.2 10.7 18.4 20.3 9.9 18.0 21.3 9.2

42.0 21.4 19.3 12.0 20.4 21.3 10.5 19.9 22.2 9.8 19.4 23.3 9.1 18.8 24.5 8.5
44.0 22.3 19.6 12.3 21.3 21.5 10.8 20.7 22.5 10.1 20.2 23.6 9.4 19.6 24.8 8.7
300S ZR300KCE
45.0 22.8 19.7 12.5 21.7 21.6 10.9 21.1 22.5 10.2 20.5 23.7 9.5 20.0 24.9 8.9
50.0 25.0 20.3 13.4 23.8 22.2 11.7 23.2 23.3 11.0 22.5 24.4 10.2 22.0 25.5 9.5

42.0 25.2 25.1 10.8 23.9 27.6 9.4 23.1 29.1 8.7 22.6 30.4 8.1 21.9 31.6 7.6
44.0 26.2 25.7 11.1 25.0 27.9 9.7 24.2 29.3 9.0 23.5 30.6 8.4 22.9 31.8 7.9
380S ZR380KCE
45.0 26.6 25.9 11.3 25.3 28.0 9.9 24.6 29.4 9.1 23.9 30.7 8.6 23.3 31.9 8.0
50.0 29.0 26.3 12.0 27.8 28.7 10.5 26.9 29.9 9.8 26.3 31.3 9.2 25.6 32.5 8.7

1. Capacities on this chart are based on refrigerant R407C. Low ambient or lower leaving water temperatures can require the use of a glycol solution or other fluid
blends. These solutions affect unit capacities. Please consult the factory on these or other special fluids.
2. KW input is for compressor(s) only.
3. EER = Energy Efficiency Ration (BTU/watt-hour). Power inputs include compressor(s), condenser fan motor(s) and control power.

6
 72D - 180D SCROLL CHILLERS Capacity Table

LWT 80 90 95 100 105

MODEL COMPRESSOR °F TONS KW EER TONS KW EER TONS KW EER TONS KW EER TONS KW EER

42.0 6.8 6.5 10.9 6.4 7.2 9.4 6.3 7.5 8.8 6.1 7.9 8.2 5.9 8.3 7.5
44.0 7.1 6.5 11.2 6.7 7.2 9.7 6.5 7.6 9.1 6.3 8.0 8.4 6.1 8.4 7.8
72D ZB30KCE
45.0 7.2 6.6 11.4 6.8 7.3 9.9 6.7 7.6 9.2 6.4 8.0 8.6 6.2 8.4 7.9
50.0 7.9 6.7 12.3 7.5 7.4 10.6 7.3 7.8 10.0 7.1 8.2 9.3 6.9 8.6 8.6

42.0 9.0 7.4 12.8 9.4 8.2 11.1 8.3 8.7 10.3 8.1 9.1 9.6 7.9 9.6 8.9
44.0 9.4 7.5 13.2 9.7 8.3 11.4 8.7 8.7 10.7 8.4 9.2 9.9 8.2 9.7 9.2
96D ZB38KCE
45.0 9.5 7.5 13.4 9.9 8.3 11.6 8.8 8.7 10.9 8.6 9.2 10.1 8.4 9.7 9.4
50.0 10.4 7.7 14.4 9.9 8.5 12.5 9.7 8.9 11.7 9.4 9.4 10.8 9.2 9.9 10.1

42.0 9.3 9.1 11.1 9.0 10.0 9.7 8.8 10.5 9.1 8.6 11.1 8.5 8.4 11.6 7.9
44.0 9.7 9.2 11.4 9.3 10.1 10.1 9.1 10.6 9.4 8.9 11.1 8.8 8.7 11.7 8.3
100D ZB42KCE
45.0 9.9 9.2 11.6 9.5 10.1 10.2 9.3 10.6 9.6 9.1 11.1 9.0 8.9 11.7 8.4
50.0 10.7 9.3 12.5 10.3 10.2 11.1 10.1 10.7 10.3 9.9 11.3 9.7 9.8 11.8 9.1

42.0 10.1 8.9 12.2 9.6 9.9 10.6 9.3 10.5 9.7 9.1 11.1 9.0 8.8 11.7 8.3
44.0 10.5 9.0 12.5 10.0 10.0 10.9 9.8 10.6 10.0 9.5 11.2 9.3 9.2 11.8 8.6
120D ZB45KCE
45.0 10.6 9.0 12.7 10.2 10.0 11.1 9.9 10.6 10.2 9.7 11.2 9.5 9.5 11.8 8.8
50.0 11.7 9.3 13.6 11.2 10.2 11.9 10.9 10.9 11.0 10.6 11.5 10.2 10.3 12.1 9.5

42.0 13.8 12.0 12.7 13.1 13.4 10.9 12.7 14.1 10.1 12.3 14.9 9.3 12.0 15.8 8.5
44.0 14.4 12.1 13.1 13.6 13.5 11.3 13.2 14.2 10.4 12.8 15.0 9.6 12.4 15.9 8.8
140D ZB58KCE
45.0 14.6 12.2 13.3 13.9 13.5 11.4 13.5 14.3 10.6 13.1 15.1 9.7 12.8 15.9 9.0
50.0 16.0 12.4 14.3 15.3 13.8 12.3 14.8 14.5 11.4 14.4 15.4 10.5 14.0 16.2 9.8

42.0 15.4 13.7 12.6 14.7 15.2 10.9 14.3 16.0 10.1 13.8 16.7 9.3 13.5 17.8 8.7
44.0 16.1 13.9 13.0 15.3 15.4 11.2 14.9 16.1 10.6 14.5 17.0 9.6 14.1 17.9 8.9
160D ZB66KCE
45.0 16.5 13.9 13.2 15.6 15.4 11.4 15.3 16.2 10.8 14.8 17.1 9.8 13.6 18.0 9.1
50.0 18.0 14.3 14.1 17.1 15.9 12.2 16.8 16.6 11.4 16.3 17.5 10.5 15.9 18.4 9.8

42.0 17.8 16.7 12.0 16.9 18.5 10.4 16.4 19.4 9.7 16.1 20.4 9.0 15.6 21.5 8.3
44.0 18.5 16.9 12.3 17.6 18.6 10.7 17.2 19.6 10.0 16.8 20.6 9.3 16.3 21.7 8.6
180D ZB76KCE
45.0 18.8 17.0 12.5 17.9 18.7 10.9 17.5 19.7 10.1 17.0 20.7 9.4 16.5 21.8 8.7
50.0 20.6 17.4 13.4 19.6 19.2 11.6 19.2 20.2 10.9 18.8 21.2 10.1 18.2 22.3 9.3

1. Capacities on this chart are based on refrigerant R407C. Low ambient or lower leaving water temperatures can require the use of a glycol solution or other fluid
blends. These solutions affect unit capacities. Please consult the factory on these or other special fluids.
2. KW input is for compressor(s) only.
3. EER = Energy Efficiency Ration (BTU/watt-hour). Power inputs include compressor(s), condenser fan motor(s) and control power.

Drake Refrigeration, Inc.

2900 Samuel Drive • Bensalem, PA 19020
(888) 289-7299
Phone (215) 638-5515
Fax (215) 638-5518 7
www.drakechillers.com
 Capacity Table 240D - 760D SCROLL CHILLERS

LWT 80 90 95 100 105

MODEL COMPRESSOR °F TONS KW EER TONS KW EER TONS KW EER TONS KW EER TONS KW EER

42.0 22.4 20.1 12.3 21.3 22.4 10.6 20.7 23.5 9.9 20.1 24.8 9.1 19.5 26.2 8.4
44.0 23.4 20.2 12.6 22.3 22.4 10.9 21.6 23.6 10.1 21.0 25.0 9.3 20.4 26.3 8.6
240D ZB95KCE
45.0 23.9 20.4 12.8 22.7 22.5 11.1 22.0 23.7 10.3 21.4 25.1 9.5 20.8 26.4 8.8
50.0 26.3 20.9 13.8 24.9 23.1 11.9 24.3 24.2 11.1 23.6 25.6 10.2 23.0 26.9 9.5

42.0 26.2 24.7 11.4 24.8 27.1 10.0 24.2 28.4 9.3 23.6 29.8 8.7 22.8 31.4 8.0
44.0 27.2 24.9 11.7 25.7 27.4 10.2 25.2 28.6 9.5 24.5 30.1 8.9 23.7 31.6 8.2
360D ZB114KCE
45.0 27.8 25.1 11.9 26.3 27.5 10.4 25.6 28.8 9.7 25.0 30.2 9.1 24.2 31.8 8.4
50.0 30.4 25.8 12.7 28.9 28.3 11.1 28.3 29.5 10.5 27.7 31.0 9.8 26.8 32.4 9.1

42.0 35.3 31.9 11.7 33.5 35.2 10.2 32.6 37.0 9.5 31.5 39.0 8.8 30.6 41.2 8.2
44.0 36.8 32.2 12.1 34.9 35.4 10.5 34.1 37.3 9.8 32.9 39.4 9.1 32.1 41.4 8.4
500D ZR250KCE
45.0 37.3 32.3 12.2 35.6 35.6 10.7 34.6 37.4 9.9 33.5 39.6 9.2 32.6 41.6 8.5
50.0 41.0 33.0 13.2 39.0 36.4 11.5 39.0 38.3 10.7 36.8 40.6 9.8 35.9 42.4 9.2

42.0 43.5 37.8 12.0 41.3 41.4 10.5 40.3 43.4 9.9 39.3 45.6 9.2 38.3 47.8 8.6
44.0 45.3 38.1 12.3 43.1 41.8 10.8 42.0 43.7 10.2 40.9 46.0 9.5 39.8 48.2 8.8
600D ZR300KCE
45.0 46.2 38.3 12.5 44.0 42.1 11.0 42.9 44.0 10.4 41.8 46.3 9.6 40.7 48.4 9.0
50.0 50.6 39.3 13.5 48.3 43.2 11.9 47.1 45.1 11.1 45.8 47.4 10.3 44.7 49.6 9.7

42.0 52.5 48.3 11.7 49.9 53.4 10.1 47.8 56.2 9.4 47.4 58.8 8.8 45.8 61.4 8.2
44.0 54.5 49.0 11.9 51.8 54.0 10.4 50.7 56.8 9.7 49.2 59.4 9.1 47.8 62.0 8.4
760D ZR380KCE
45.0 55.4 49.2 12.1 52..7 54.3 10.5 51.5 57.0 9.8 50.0 59.6 9.2 48.6 62.1 8.6
50.0 60.2 50.7 12.8 57.5 55.7 11.2 56.2 58.5 10.5 54.8 61.0 9.8 53.3 63.5 9.2

1. Capacities on this chart are based on refrigerant R407C. Low ambient or lower leaving water temperatures can require the use of a glycol solution or other fluid
blends. These solutions affect unit capacities. Please consult the factory on these or other special fluids.
2. KW input is for compressor(s) only.
3. EER = Energy Efficiency Ration (BTU/watt-hour). Power inputs include compressor(s), condenser fan motor(s) and control power.

8
 MICROPROCESSOR FEATURES

Control power on/off switch

Indicator light display

L.E.D. display

System pump power on/off switch

Scrolling up & down buttons

Standard Features
• Control operates to a +/- 1°F accuracy
• Powered from the chiller 24 volt control circuit. No high voltage interference.
• 1 or 2 compressor control capability
• Operates and displays in °F and °C
• Controls chiller on inlet or outlet temperature
• Scroll through set up and review mode
• 30-second compressor time delay to prevent short cycling and nuisance faults
• 60-second hot gas solenoid delay to prevent false hot gas feeding during
compressor start up
• Lock out relay shuts down the chiller when control fault settings activate
• Automatic compressor lead lag on dual circuit chillers
• Weather resistant for outdoor use
• Basic chiller functionality for ease of set up and operation
• Factory default function code to reset the controller to the initial factory settings
• Two L.E.D. display windows
a) Inlet and outlet temperature during chiller operation
b) Displays refrigerant high and low pressure in review mode
1) No cap tubes to break causing a loss of refrigerant and down time
2) No refrigerant revcovery to change out the pressure transducer
• Indicator lights
a) Chiller control power on/off switch with green indicator
b) System pump on/off switch with green indicator
c) Compressor run indicator lights
d) High and low refrigerant pressure red fault indicator
e) Low fluid flow red indicator
• Display flashes all chiller safety faults
a) High fluid temperature outlet alarm
Display only - does not shut the chiller down
b) Low fluid temperature outlet alarm
Shuts down the chiller and requires manual reset
c) High refrigerant pressure
Shuts down the chiller and requires manual reset
d) Low refrigerant pressure
Shuts down the chiller and requires manual reset
e) Low water flow through evaporator
Shuts down the chiller and automatically resets when flow is restored
• Monitors and logs compressor run hours

Drake Refrigeration, Inc.

2900 Samuel Drive • Bensalem, PA 19020
(888) 289-7299
Phone (215) 638-5515
Fax (215) 638-5518 9
www.drakechillers.com
 Standard Features and Options PAC & PACT
R407C Packaged, Air-Cooled Chillers

Standard Features (all models)

• ETL listed
• Microprocessor controller (see page 9 for details)
• STAINLESS STEEL, brazed plate evaporator with 1/2” insulation and secured
in a steel bracket
• Shell and tube 180S to 600D models
• Scroll compressor with crankcase heater
• Suction accumulator
• Water flow switch
• Hot gas by-pass capacity control
• 24V control transformer
• Direct drive condenser fan motor
• Rust resistant, high CFM, aluminum condenser fan blade
• Condenser(s): copper tube/aluminum fin
• Compressor motor contactor
• Condenser motor and control circuit fusing
• Painted, galvanized sheet metal cabinet
• 1/2” insulation on all water and refrigerant lines
• Liquid line drier, sightglass, solenoid, TXV
• Complete refrigerant charge from factory

Tank Models Only

• STAINLESS STEEL storage tank with 3/4” insulation

• Fused, STAINLESS STEEL re-circulation pump for tank operation with ball valve
PAC90S Models (shown) and cleanable strainer
• Tank pressure relief valve, vent and drain connections

Available Options (most models)

• ChillerGuard® Internet Interface Device
• Remote microprocessor panel
• 4 year extended compressor warranty
• Casters (factory mounted)
• 115 volt (rain tight) service outlet
• Fused disconnect
• Phase monitor
• Compressor fusing
• Fan cycle control on PAC90 and 120 units only (+40°F)
• Variable fan speed control (+20°F)
• Flooded condenser with receiver/head pressure control (-20°F)
• Heated, flooded condenser with receiver/head pressure control (-20°F)
• Factory installed evaporator heat tape freeze protection thermostatically controlled
• Water pressure gauge set
• Fused, STAINLESS STEEL system process pump
• Pump suction isolation valve
• Dual system pump with manual changeover
• Dual system pump with auto changeover
• Low flow by-pass valve
• “Gold” finned condenser coil (coastal protection)
• “Copper” finned condenser coil (coastal protection)
• Heresite-coated condenser coil (coastal protection)
• Semi-hermetic compressor
• Shell and tube chiller barrel
• Water flow meter
• Auto city water make up solenoid
• Auto city water changeover panel with 5 micron filter
• Special piping for de-ionized and reverse osmosis water systems
PACT60S Models (shown)
Tank Models Only

• Storage tank sight glass

• Tank low liquid level indicator with dry contacts

10
 PAC - SINGLE CIRCUIT Dimensional and Electrical Specifications
R407C Packaged, Air-Cooled Chillers

BTUH @ 95°F LENGTH WIDTH HEIGHT FLUID COMPRESSOR RLA LRA FAN MOTOR WT.
MODEL MCA M.O.P.
AMB. 45°F Lwt IN. IN. IN. CONN. QTY HP EA EA QTY FLA EA. LBS.

12S3-S2-Z 14,400 1.3 10 42 3.3 20 25 250

18S3-S2-Z 15.7 61 3.3 25 40
3/4” FPT
18S3-T3-Z 20,400 2.0 8.9 55 3.3 15 20 250
18S3-T4-Z 4.3 27 1.6 15 15
24S3-S2-Z 15.7 73 3.3 25 40
24S3-T3-Z 24,000 36 2.5 8.2 63 3.3 15 20 275
24S3-T4-Z 4.3 31 1.6 15 15
30S3-S2-Z 20.7 127 3.3 30 45
30S3-T3-Z 13.9 88 3.3 25 30
32,400 3.5 300
30S3-T4-Z 7.1 44 1.6 15 15
30S3-T5-Z 5.0 35 1.72 15 15
36S3-S2-Z 25.0 132 1 3.3 35 50
36S3-T3-Z 15.0 115 3.3 25 35
39,600 4 500
36S3-T4-Z 1” FPT 7.4 48 1.6 15 15
36S3-T5-Z 6.4 40 1.72 15 15
48S3-S2-Z 30.1 175 3.3 45 70
48S3-T3-Z 20.7 115 3.3 30 45
52,800 56 5 550
48S3-T4-Z 34 40 1 8.9 63 1.6 15 20
48S3-T5-Z 7.1 50 1.72 15 15
50S3-S2-Z 56,400 5 27.9 129 3.3 40 60 575
60S3-T3-Z 20.7 156 3.3 30 45
60S3-T4-Z 60,000 6 11.5 70 1.6 20 25 600
60S3-T5-Z 7.9 54 1.72 15 15
70S3-T3-Z 32.1 195 3.3 50 70
70S3-T4-Z 84,000 8 16.4 95 1.6 25 40 700
70S3-T5-Z 12.0 80 1.72 20 30
80S3-T3-Z 33.6 225 3.3 50 80
80S3-T4-Z 92,400 9 17.3 114 1.6 25 40 725
80S3-T5-Z 13.5 80 1.72 25 30
85 1.25” FPT
90S3-T3-Z 41.4 238 3.3 50 90
90S3-T4-Z 108,000 10 19.2 125 2 1.6 30 45 750
90S3-T5-Z 13.8 80 1.72 25 30
120S3-T3-Z 55.0 300 3.3 80 125
120S3-T4-Z 134,400 12 25.7 150 1.6 40 60 850
120S3-T5-Z 20.7 109 1.72 30 50
180S3-T3-Z 60.0 340 2.3 80 125
180S3-T4-Z 148,800 143 2” MPT 15 31.4 173 1.2 45 70 1600
180S3-T5-Z 23.6 132 0.9 35 50
250S3-T3-Z 81.4 505 2.3 100 175
250S3-T4-Z 210,000 2.5” MPT 20 37.9 225 1.2 60 80 1700
250S3-T5-Z 32.1 180 0.9 45 70
183 44 54 1 3
300S3-T3-Z 100.0 500 2.3 125 225
300S3-T4-Z 253,200 2.5” MPT 25 48.6 250 1.2 70 110 1800
300S3-T5-Z 36.4 198 0.9 50 80
380S3-T3-Z 121.4 599 2.3 150 250
380S3-T4-Z 295,200 223 2.5” MPT 30 59.3 310 4 1.2 80 125 2000
380S3-T5-Z 47.1 239 0.9 70 100

Drake Refrigeration, Inc.

2900 Samuel Drive • Bensalem, PA 19020
(888) 289-7299
Phone (215) 638-5515
Fax (215) 638-5518 11
www.drakechillers.com
Dimensional and Electrical Specifications PAC - DUAL CIRCUIT
R407C Packaged, Air-Cooled Chillers

BTUH @ 95°F LENGTH WIDTH HEIGHT FLUID COMPRESSOR RLA LRA FAN MOTOR WT.
MODEL MCA M.O.P.
AMB. 45°F Lwt IN. IN. IN. CONN. QTY HP EA EA QTY FLA EA. LBS.

72D3-S2-Z 25.0 132 3.3 70 80

72D3-T3-Z 15.0 115 3.3 45 50
80,400 4 900
72D3-T4-Z 7.4 48 1.6 20 25
72D3-T5-Z 6.4 40 1.72 20 20
96D3-S2-Z 30.1 175 3.3 80 100
96D3-T3-Z 20.7 115 3.3 60 70
105,800 75 34 5 1000
96D3-T4-Z 8.9 63 1.6 25 30
96D3-T5-Z 7.1 50 1.72 20 25
100D3-S2-Z 111,600 5 27.9 129 3.3 70 80 1100
1.25” FPT
120D3-T3-Z 20.7 156 3.3 60 70
120D3-T4-Z 118,800 47 2 6 11.5 70 2 1.6 30 40 1150
120D3-T5-Z 7.9 54 1.72 25 25
140D3-T3-Z 32.1 195 3.3 80 110
140D3-T4-Z 162,000 8 16.4 95 1.6 45 50 1400
140D3-T5-Z 12.0 80 1.72 35 40
160D3-T3-Z 33.6 225 3.3 90 110
160D3-T4-Z 183,600 85 40 9 17.3 114 1.6 45 50 1450
160D3-T5-Z 13.5 80 1.72 35 45
180D3-T3-Z 41.4 239 3.3 100 125
180D3-T4-Z 210,000 1.5” FPT 10 19.2 125 1.6 50 60 1500
180D3-T5-Z 13.8 80 1.72 35 45
240D3-T3-Z 55.0 300 3.3 150 175
240D3-T4-Z 264,000 66 75 49 1.5” FPT 2 12 25.7 150 4 1.6 70 80 1750
240D3-T5-Z 20.7 109 1.72 60 70
360D3-T3-Z 60.0 340 2.3 150 200
360D3-T4-Z 307,200 143 2.5” MPT 15 31.4 173 4 1.2 80 100 2600
360D3-T5-Z 23.6 132 0.9 60 80
500D3-T3-Z 81.4 505 2.3 200 250
500D3-T4-Z 415,200 183 20 37.9 225 6 1.2 100 125 2900
500D3-T5-Z 32.1 180 0.9 80 100
84 54 3” MPT 2
600D3-T3-Z 100.0 500 2.3 225 300
600D3-T4-Z 514,800 25 48.6 250 1.2 125 150 3200
600D3-T5-Z 36.4 198 0.9 90 100
223 8
760D3-T3-Z 121.4 599 2.3 300 400
760D3-T4-Z 618,000 4” VIC 30 59.3 310 1.2 125 200 4000
760D3-T5-Z 47.1 239 0.9 125 150

12
 PACT Dimensional and Electrical Specifications
R407C Packaged, Air-Cooled Chillers with Tank

BTUH @ 95°F LENGTH WIDTH HEIGHT TANK FLUID COMPRESSOR RLA LRA FAN MOTOR EVAP. PUMP WT.
MODEL MCA M.O.P.
AMB. 45°F Lwt IN. IN. IN. GAL. CONN. EA EA FLA LBS.
QTY HP QTY FLA EA.
12S3-S2-Z 14,000 1.3 10 42 3.3 5.1 25 30 550
18S3-S2-Z 15.7 61 3.3 5.1 30 40
3/4” FPT
18S3-T3-Z 18,000 2.0 8.9 55 3.3 5.1 20 25 600
18S3-T4-Z 4.3 27 1.6 1.3 15 15
24S3-S2-Z 15.7 73 3.3 5.1 30 40
24S3-T3-Z 22,000 36 60 2.5 8.2 63 3.3 5.1 20 25 650
24S3-T4-Z 4.3 31 1.6 1.3 15 15
30S3-S2-Z 30 20.7 127 3.3 5.1 35 50
30S3-T3-Z 13.9 88 3.3 5.1 30 35
28,800 3.5 700
30S3-T4-Z 7.1 44 1.6 1.3 15 15
30S3-T5-Z 5.0 34 1.72 0.72 15 15
36S3-S2-Z 25.0 132 1 3.3 5.1 40 60
36S3-T3-Z 15.0 115 3.3 5.1 30 40
36,000 4 800
36S3-T4-Z 7.4 48 1.6 1.3 15 15
36S3-T5-Z 6.4 40 1.72 0.72 15 15
1” FPT
48S3-S2-Z 30.1 175 3.3 5.1 50 70
48S3-T3-Z 20.7 115 3.3 5.1 35 50
SINGLE

49,200 56 5 850
48S3-T4-Z 34 1 8.9 63 1.6 1.3 15 20
48S3-T5-Z 7.1 50 1.72 0.72 15 15
50S3-S2-Z 51,600 5 27.9 129 3.3 5.1 45 70 875
60S3-T3-Z 60 20.7 156 3.3 5.1 35 50
60S3-T4-Z 55,200 6 11.5 70 1.6 1.3 20 25 900
60S3-T5-Z 7.9 54 1.72 0.72 15 20
66
70S3-T3-Z 32.1 195 3.3 6.7 60 80
70S3-T4-Z 75,600 8 16.4 95 1.6 1.7 25 35 1100
70S3-T5-Z 12.0 80 1.72 1 20 30
80S3-T3-Z 33.6 225 3.3 7.9 60 80
80S3-T4-Z 84,000 9 17.3 114 1.6 2.0 30 40 1150
80S3-T5-Z 13.5 80 1.72 1.6 25 35
85 2
90S3-T3-Z 41.4 239 3.3 10.0 70 100
1.25”
90S3-T4-Z 98,400 90 10 19.2 125 1.6 2.8 30 45 1250
FPT
90S3-T5-Z 13.8 80 1.72 1.8 25 35
120S3-T3-Z 55.0 300 3.3 10.0 90 125
120S3-T4-Z 122,400 12 25.7 150 1.6 2.8 40 60 1300
120S3-T5-Z 20.7 109 1.72 1.8 35 50
72D3-S2-Z 25.0 132 3.3 6.7 70 90
72D3-T3-Z 15.0 115 3.3 6.7 50 60
73,200 60 4 1100
72D3-T4-Z 7.4 48 1.6 1.7 25 25
72D3-T5-Z 6.4 40 1.72 1 20 25
96D3-S2-Z 30.1 175 3.3 10.0 90 110
96D3-T3-Z 1.25” 20.7 115 3.3 10.0 70 80
96,000 75 34 5 1200
96D3-T4-Z FPT 8.9 63 1.6 2.8 30 35
96D3-T5-Z 7.1 50 1.72 1.8 25 25
100D3-S2-Z 102,000 5 27.9 129 3.3 10.0 80 100 1250
120D3-T3-Z 90 20.7 156 3.3 10.0 70 80
DUAL

120D3-T4-Z 108,000 73 2 6 11.5 70 2 1.6 2.8 35 40 1250

120D3-T5-Z 7.9 54 1.72 1.8 25 30
140D3-T3-Z 32.1 195 3.3 10.5 90 110
140D3-T4-Z 147,000 8 16.4 95 1.6 3.2 45 50 1300
140D3-T5-Z 12.0 80 1.72 2.3 35 40
160D3-T3-Z 33.6 225 3.3 7.9 100 110
160D3-T4-Z 167,000 85 40 1.5” FPT 9 17.3 114 1.6 2.0 45 60 1400
160D3-T5-Z 13.5 80 1.72 1.6 40 45
135
180D3-T3-Z 41.4 239 3.3 5.6 110 125
180D3-T4-Z 190,800 10 19.2 125 1.6 2.8 50 60 1450
180D3-T5-Z 13.8 80 1.72 1.8 40 50

Drake Refrigeration, Inc.

2900 Samuel Drive • Bensalem, PA 19020
(888) 289-7299
Phone (215) 638-5515
Fax (215) 638-5518 13
www.drakechillers.com
 Standard Features and Options ES & EST
R407C Split-System, Air-Cooled Chillers

Standard Features (all models)

• ETL listed
• Remote Condenser Coil
• Microprocessor controller (see page 9 for details)
• STAINLESS STEEL, brazed plate evaporator with 1/2” insulation and secured
in a steel bracket
• Shell and tube 180S to 600D models
• Scroll compressor with crankcase heater
• Suction accumulator
• Water flow switch
• Hot gas by-pass capacity control
• 24V control transformer
• Direct drive condenser fan motor
• Rust resistant, high CFM, aluminum condenser fan blade
• Condenser(s): copper tube/aluminum fin
• Compressor motor contactor
• Condenser motor and control circuit fusing
• Painted, galvanized sheet metal cabinet
• 1/2” insulation on all water and refrigerant lines
• Liquid line drier, sightglass, solenoid, TEV
• Complete refrigerant charge from factory

Tank Models Only

• STAINLESS STEEL storage tank with 3/4” insulation

ES60S Model (shown) • Fused, STAINLESS STEEL re-circulation pump for tank operation with ball valve
and cleanable strainer
• Tank pressure relief valve, vent and drain connections

Available Options (most models)

• ChillerGuard® Internet Interface Device
• Remote microprocessor panel
• 4 year extended compressor warranty
• Casters (factory mounted)
• 115 volt (rain tight) service outlet
• Fused disconnect
• Phase monitor
• Compressor fusing
• Fan cycle control on PAC90 and 120 units only (+40°F)
• Variable fan speed control (+20°F)
• Flooded condenser with receiver/head pressure control (-20°F)
• Heated, flooded condenser with receiver/head pressure control (-20°F)
• Factory installed evaporator heat tape freeze protection thermostatically controlled
EST90S Model (shown)
• Water pressure gauge set
• Fused, STAINLESS STEEL system process pump
• Pump suction isolation valve
• Dual system pump with manual changeover
• Dual system pump with auto changeover
• Low flow by-pass valve
• “Gold” finned condenser coil (coastal protection)
• “Copper” finned condenser coil (coastal protection)
• Heresite-coated condenser coil (coastal protection)
• Semi-hermetic compressor
• Shell and tube chiller barrel
• Water flow meter
• Auto city water make up solenoid
• Auto city water changeover panel with 5 micron filter
• Special piping for de-ionized and reverse osmosis water systems

Tank Models Only

• Storage tank sight glass

• Tank low liquid level indicator with dry contacts

14
 ES - SINGLE CIRCUIT Dimensional and Electrical Specifications
R407C Split-System, Air-Cooled Chillers

BTUH @ 95°F LENGTH WIDTH HEIGHT FLUID COMPRESSOR RLA LRA FAN MOTOR WT. CONDENSER
MODEL MCA M.O.P. LBS.
AMB. 45°F Lwt IN. IN. IN. CONN. QTY HP EA EA QTY FLA EA. SELECTION

12S3-S2-Z 14,400 1.3 10 42 3.3 20 25 225 CS12S

18S3-S2-Z 3/4” 15.7 61 3.3 25 40
18S3-T3-Z 20,400 FPT 2.0 8.9 55 3.3 15 20 225 CS18S
18S3-T4-Z 4.3 27 1.6 15 15
24S3-S2-Z 15.7 73 3.3 25 40
24S3-T3-Z 24,000 2.5 8.2 63 3.3 15 20 370 CS24S
24S3-T4-Z 4.3 31 1.6 15 15
30S3-S2-Z 20.7 127 3.3 30 45
30S3-T3-Z 13.9 88 3.3 25 30
32,400 3.5 500 CS30S
30S3-T4-Z 7.1 44 1.6 15 15
30S3-T5-Z 5.0 35 1.72 15 15
36S3-S2-Z 26 25.0 132 1 3.3 35 50
36S3-T3-Z 15.0 115 3.3 25 35
39,600 4 500 CS36S
36S3-T4-Z 1” FPT 7.4 48 1.6 15 15
36S3-T5-Z 6.4 40 1.72 15 15
48S3-S2-Z 30.1 175 3.3 45 70
48S3-T3-Z 20.7 115 3.3 30 45
52,800 5 550 CS48S
48S3-T4-Z 44 28 1 8.9 63 1.6 15 20
48S3-T5-Z 7.1 50 1.72 15 15
50S3-S2-Z 56,400 5 27.9 129 3.3 40 60 575 CS50S
60S3-T3-Z 20.7 156 3.3 30 45
60S3-T4-Z 60,000 6 11.5 70 1.6 20 25 600 CS60S
60S3-T5-Z 7.9 54 1.72 15 15
70S3-T3-Z 32.1 195 3.3 50 70
70S3-T4-Z 84,000 8 16.4 95 1.6 25 40 700 CS70S
70S3-T5-Z 12.0 80 1.72 20 30
80S3-T3-Z 33.6 225 3.3 50 80
80S3-T4-Z 92,400 9 17.3 114 1.6 25 40 725 CS80S
80S3-T5-Z 1.25” 13.5 80 1.72 25 30
37 2
90S3-T3-Z FPT 41.4 239 3.3 50 90
90S3-T4-Z 108,000 10 19.2 125 1.6 30 45 750 CS90S
90S3-T5-Z 13.8 80 1.72 25 30
120S3-T3-Z 55.0 300 3.3 80 125
120S3-T4-Z 134,400 12 25.7 150 1.6 40 60 850 CS120S
120S3-T5-Z 20.7 109 1.72 30 50
180S3-T3-Z 60.0 340 2.3 80 125
180S3-T4-Z 148,800 2” MPT 15 31.4 173 1.2 45 70 850 DCM024
180S3-T5-Z 23.6 132 0.9 35 50
250S3-T3-Z 81.4 505 2.3 100 175
2.5”
250S3-T4-Z 210,000 65 20 37.9 225 2 1.2 60 80 950 DCM030
MPT
250S3-T5-Z 32.1 180 0.9 45 70
34 42 1
300S3-T3-Z 100.0 500 2.3 125 225
2.5”
300S3-T4-Z 253,200 25 48.6 250 1.2 70 110 1000 DCM035
MPT
300S3-T5-Z 36.4 198 0.9 50 80
380S3-T3-Z 121.4 599 2.3 150 250
2.5”
380S3-T4-Z 295,200 30 59.3 310 4 1.2 80 125 1000 DCM047
MPT
380S3-T5-Z 47.1 239 0.9 70 100

1. See Bulletin D50-DCM-PDI-1 for condenser section specifications.

2. See Installation Instruction Manual Refrigerant Chart for additional refrigerant charge needed for extended pipe length.

Drake Refrigeration, Inc.

2900 Samuel Drive • Bensalem, PA 19020
(888) 289-7299
Phone (215) 638-5515
Fax (215) 638-5518 15
www.drakechillers.com
Dimensional and Electrical Specifications ES - DUAL CIRCUIT
R407C Split-System, Air-Cooled Chillers

BTUH @ 95°F LENGTH WIDTH HEIGHT FLUID COMPRESSOR RLA LRA FAN MOTOR WT. CONDENSER
MODEL MCA M.O.P.
AMB. 45F Lwt IN. IN. IN. CONN. QTY HP EA EA QTY FLA EA. LBS. SELECTION

72D3-S2-Z 25.0 132 3.3 70 80

72D3-T3-Z 15.0 115 3.3 45 50
80,400 4 900 CS72D
72D3-T4-Z 7.4 48 1.6 20 25
72D3-T5-Z 6.4 40 1.72 20 20
96D3-S2-Z 30.1 175 3.3 80 100
96D3-T3-Z 20.7 115 3.3 60 70
105,800 5 1000 CS96D
96D3-T4-Z 8.9 63 1.6 25 30
96D3-T5-Z 7.1 50 1.72 20 25
100D3-S2-Z 111,600 1.25” 5 27.9 129 3.3 70 80 1100 CS100D
120D3-T3-Z FPT 20.7 156 3.3 60 70
120D3-T4-Z 118,800 6 11.5 70 2 1.6 30 40 1300 CS120D
120D3-T5-Z 7.9 54 1.72 25 25
65 30 39 2
140D3-T3-Z 32.1 195 3.3 80 110
140D3-T4-Z 162,000 8 16.4 95 1.6 45 50 1400 CS140D
140D3-T5-Z 12.0 80 1.72 35 40
160D3-T3-Z 33.6 225 3.3 90 110
160D3-T4-Z 183,600 9 17.3 114 1.6 45 50 1450 CS160D
160D3-T5-Z 13.5 80 1.72 35 45
180D3-T3-Z 41.4 239 3.3 100 125
180D3-T4-Z 210,000 10 19.2 125 1.6 50 60 1500 CS180D
180D3-T5-Z 1.5” 13.8 80 1.72 35 45
240D3-T3-Z FPT 55.0 300 3.3 150 175
240D3-T4-Z 264,000 12 25.7 150 4 1.6 70 80 1750 CS240D
240D3-T5-Z 20.7 109 1.72 60 70
360D3-T3-Z 60.0 340 2.3 150 200
2.5”
360D3-T4-Z 307,200 15 31.4 173 4 1.2 80 100 1500 DCM047
MPT
360D3-T5-Z 23.6 132 0.9 60 80
500D3-T3-Z 81.4 505 2.3 200 250
500D3-T4-Z 415,200 20 37.9 225 6 1.2 100 125 1600 DCM060
500D3-T5-Z 32.1 180 0.9 80 100
85 34 42 3” MPT 2
600D3-T3-Z 100.0 500 2.3 225 300
600D3-T4-Z 514,800 25 48.6 250 1.2 125 150 1700 DCM082
600D3-T5-Z 36.4 198 0.9 90 100
8
760D3-T3-Z 121.4 599 2.3 300 400
760D3-T4-Z 618,000 4” V 30 59.3 310 1.2 125 200 1700 DCM095
760D3-T5-Z 47.1 239 0.9 125 150

1. See Bulletin D50-DCM-PDI-1 for condenser section specifications.

2. See Installation Instruction Manual Refrigerant Chart for additional refrigerant charge needed for extended pipe length.

16
 EST Dimensional and Electrical Specifications
R407C Split-System, Air-Cooled Chillers with Tank

BTUH @ 95°F LENGTH WIDTH HEIGHT TANK FLUID COMPRESSOR RLA LRA FAN MOTOR EVAP. PUMP WT. CONDENSER
MODEL MCA M.O.P.
AMB. 45F Lwt IN. IN. IN. GAL. CONN. EA EA FLA LBS. SELECTION
QTY HP QTY FLA EA.
12S3-S2-Z 14,000 1.3 10 42 3.3 5.1 25 30 550 CS12S
18S3-S2-Z 3/4” 15.7 61 3.3 5.1 30 40
18S3-T3-Z 18,000 FPT 2.0 8.9 55 3.3 5.1 20 25 600 CS18S
18S3-T4-Z 36 4.3 27 1.6 1.3 15 15
24S3-S2-Z 15.7 73 3.3 5.1 30 40
24S3-T3-Z 22,000 2.5 8.2 63 3.3 5.1 20 25 650 CS24S
24S3-T4-Z 4.3 31 1.6 1.3 15 15
30S3-S2-Z 53 30 20.7 127 3.3 5.1 35 50
30S3-T3-Z 34 13.9 88 3.3 5.1 30 35
28,800 3.5 700 CS30S
30S3-T4-Z 7.1 44 1.6 1.3 15 15
30S3-T5-Z 5.0 35 1.72 0.72 15 15
36S3-S2-Z 25.0 132 1 3.3 5.1 40 60
36S3-T3-Z 15.0 115 3.3 5.1 30 40
36,000 4 800 CS36S
36S3-T4-Z 7.4 48 1.6 1.3 15 15
36S3-T5-Z 6.4 40 1.72 0.72 15 15
1” FPT
48S3-S2-Z 30.1 175 3.3 5.1 50 70
48S3-T3-Z 20.7 115 3.3 5.1 35 50
SINGLE

49,200 5 850 CS48S

48S3-T4-Z 1 8.9 63 1.6 1.3 15 20
48S3-T5-Z 7.1 50 1.72 0.72 15 15
50S3-S2-Z 51,600 5 27.9 129 3.3 5.1 45 70 875 CS50S
60S3-T3-Z 56 60 20.7 156 3.3 5.1 35 50
60S3-T4-Z 55,200 6 11.5 70 1.6 1.3 20 25 900 CS60S
60S3-T5-Z 7.9 54 1.72 0.72 15 20
70S3-T3-Z 32.1 195 3.3 6.7 60 80
70S3-T4-Z 75,600 8 16.4 95 1.6 1.7 25 35 1100 CS70S
63
70S3-T5-Z 12.0 80 1.72 1 20 30
80S3-T3-Z 33.6 225 3.3 7.9 60 80
80S3-T4-Z 84,000 9 17.3 114 1.6 2.0 30 40 1150 CS80S
80S3-T5-Z 13.5 80 1.72 1.6 25 35
2
90S3-T3-Z 41.4 239 3.3 10.0 70 100
125”
90S3-T4-Z 98,400 85 90 10 19.2 125 1.6 2.8 30 45 1250 CS90S
FPT
90S3-T5-Z 13.8 80 1.72 1.8 25 35
120S3-T3-Z 55.0 300 3.3 10.0 90 125
120S3-T4-Z 122,400 12 25.7 150 1.6 2.8 40 60 1300 CS120S
120S3-T5-Z 20.7 109 1.72 1.8 35 50
72D3-S2-Z 25.0 132 3.3 6.7 70 90
72D3-T3-Z 15.0 115 3.3 6.7 50 60
73,200 60 4 1350 CS72D
72D3-T4-Z 7.4 48 1.6 1.7 25 25
72D3-T5-Z 6.4 40 1.72 1 20 25
96D3-S2-Z 30.1 175 3.3 10.0 90 110
96D3-T3-Z 1.25” 20.7 115 3.3 10.0 70 80
96,000 5 1400 CS96D
96D3-T4-Z FPT 8.9 63 1.6 2.8 30 35
96D3-T5-Z 7.1 50 1.72 1.8 25 25
100D3-S2-Z 102,000 5 27.9 129 3.3 10.0 80 100 1450 CS100D
120D3-T3-Z 90 20.7 156 3.3 10.0 70 80
120D3-T4-Z 108,000 6 11.5 70 2 1.6 2.8 35 40 1500 CS120D
DUAL

120D3-T5-Z 7.9 54 1.72 1.8 25 30

85 34 63 2
140D3-T3-Z 32.1 195 3.3 10.5 90 110
140D3-T4-Z 147,000 8 16.4 95 1.6 3.2 45 50 1700 CS140D
140D3-T5-Z 12.0 80 1.72 2.3 35 40
160D3-T3-Z 33.6 225 3.3 7.9 100 110
160D3-T4-Z 167,000 9 17.3 114 1.6 2.0 45 60 1800 CS160D
160D3-T5-Z 1.5” 13.5 80 1.72 1.6 40 45
180D3-T3-Z FPT 41.4 239 3.3 5.6 110 125
180D3-T4-Z 190,800 135 10 19.2 125 1.6 2.8 50 60 1900 CS180D
180D3-T5-Z 13.8 80 1.72 1.8 40 50
240D3-T3-Z 55.0 300 3.3 5.6 125 150
240D3-T4-Z 238,800 12 25.7 150 4 1.6 2.8 60 70 2100 CS240D
240D3-T5-Z 20.7 109 1.72 2.3 60 70

Drake Refrigeration, Inc.

2900 Samuel Drive • Bensalem, PA 19020
(888) 289-7299
Phone (215) 638-5515
Fax (215) 638-5518 17
www.drakechillers.com
Schematical Drawings PAC & PACT
R407C Packaged, Air-Cooled Chillers

PAC36S - 60S PAC380S

PAC140D - 180D PAC240D

PAC500D PACT36S, 48S, 50S, & 60S

18
 ES & EST Schematical Drawings
R407C Split-System, Air-Cooled Chillers

ES12S - 60S ES180S - 380S

ES72D, 96D, 100D, 120D, 140D, 160D, 180D, & 240D ES360D - 760D

EST48S, 50S, 60S, & 70S EST72D, 96D, 100D, 120D 140D, 160D, 180D, & 240D

Drake Refrigeration, Inc.

2900 Samuel Drive • Bensalem, PA 19020
(888) 289-7299
Phone (215) 638-5515
Fax (215) 638-5518 19
www.drakechillers.com
Dimensional Specifications CS
R407C Split-System Condenser Section

FAN MOTOR REFRIGERANT CONN.

MODEL LENGTH IN. WIDTH IN. HEIGHT IN. WT. LBS.
QTY HP DISCHARGE LIQUID
CS12S 125
1/4
CS18S 135
36 1/2” 3/8”
CS24S 145
CS30S 200
1
CS36S 225
1/2
CS48S 245
56 36 40 5/8” 1/2”
CS50S
255
CS60S
CS70S
CS80S 355
65 2 3/4 3/4” 5/8”
CS90S
CS120S 400
CS72D 500
CS96D 525
75 36 1/2 5/8” 1/2”
CS100D 650
CS120D 47 2 650
CS140D 750
CS160D 85 40 750
3/4 3/4” 5/8”
CS180D 750
CS240D 66 75 49 4 1000

CS48S, 50S & 60S

CS72D - 120D

20
 TANK SECTION Dimensional Specifications, Features and Options

LENGTH WIDTH HEIGHT WATER RECIRCULATION FLA FLA WT.

MODEL TANK CAPACITY
IN. IN. IN. CONN. PUMP 230/3Ø 460/3Ø LBS.

TS30S 36 1” FPT 30 GALLONS 1/3HP 2.8 1.4 500

TS60S 56 1” FPT 60 GALLONS 1/3HP 2.8 1.4 525
34 36
TS90S 75 1 1/4” FPT 90 GALLONS 1/2HP 3.6 1.8 600
TS135S 85 1 1/2” FPT 135 GALLONS 3/4HP 2.6 1.3 625

Standard Features
• STAINLESS STEEL storage tank
• 3/4” tank and fluid piping insulation
• Copper fluid piping
• Tank vent and drain connections
• Tank pressure relief valve
• Fused evaporator fluid re-circulating STAINLESS STEEL pump
• Fluid pump discharge ball valve and cleanable “Y” strainer
• Control box with pump terminal block
• Painted, galvanized steel sheet metal cabinet
• 24 volt L.E.D. process fluid thermometers

Available Options
• Fused, STAINLESS STEEL process pump
• Dual system pump with manual changeover
• Dual system pump with auto changeover
• Tank fluid sight glass
• Tank liquid level indicator with dry contacts
• Low flow by-pass valve
• Water flow meter
• Auto city water make up solenoid
• Special piping for de-ionized and reverse osmosis
water systems
• STAINLESS STEEL sheet metal cabinet
• 1” tank and piping insulation in lieu of 3/4”
• Seal-tight electrical connections

TS60S

Drake Refrigeration, Inc.

2900 Samuel Drive • Bensalem, PA 19020
(888) 289-7299
Phone (215) 638-5515
Fax (215) 638-5518 21
www.drakechillers.com
 GLYCOL FACTOR TABLES

PROPYLENE GLYCOL CAPACITY CORRECTION FACTOR TABLE

PERCENT PROPYLENE 15% 20% 25% 30% 35% 40% 50%

GLYCOL BY WEIGHT
FREEZING POINT IN °F 24 18 15 9 5 -5 -30
CAPACITY FACTOR MULTIPLIER* 0.992 0.986 0.972 0.960 0.950 0.928 0.878
PRESSURE DROP MULTIPLIER 1.04 1.08 1.13 1.21 1.26 1.47 2.79

ETHYLENE GLYCOL CAPACITY CORRECTION FACTOR TABLE

PERCENT ETHYLENE 10% 15% 20% 25% 30% 35% 40%

GLYCOL BY WEIGHT
FREEZING POINT IN °F 25 21 17 11 5 0 -10
CAPACITY FACTOR MULTIPLIER* 0.98 0.96 0.95 0.93 0.92 0.91 0.89
PRESSURE DROP MULTIPLIER 1.08 1.11 1.16 1.21 1.27 1.32 1.38

* At standard ARI 590 conditions: 54°F entering fluid temperature, 44°F leaving fluid temperature, 95°F ambient temperature, 0.0005 fouling.

22
Drake Refrigeration, Inc.
2900 Samuel Drive • Bensalem, PA 19020
(888) 289-7299
Phone (215) 638-5515
Fax (215) 638-5518
www.drakechillers.com
 www.DrakeChillers.com
Drake Refrigeration, Inc.
2900 Samuel Drive • Bensalem, PA 19020
(888) 289-7299
Phone (215) 638-5515
Fax (215) 638-5518

EPA COMPLIANT
Scroll Rev 6/11/12