Name of Learner: Grade Level: Section: Date: Learning Activity Sheet

COMPUTER SYSTEM SERVICING
Name of Learner:
Grade Level:
Section:
Date:
LEARNING ACTIVITY SHEET
APPLYING QUALITY STANDARDS
Background Information for Learners
Technical Terms
Checklist - help organize data by category

Durability - enduring; resisting wear
Flowchart - describes process in as much detail as possible by graphically
displaying the steps in proper sequence
Hardware - refers to the electronic and mechanical components that make a
computer system.
Histogram - plots data in a frequency distribution table
Hostile - being an enemy; unfriendly
ISO - International Standardization Organization
OHS - Occupational Health and Safety procedures
Pareto diagram - puts data in a hierarchical order which allows the significant b
problems to be connected first.
PPE - personal protective equipment
Quality - essential character nature; degree or grade of excellence
Scatter diagram- shows how two variables are related and is this used to test for
cause and effect relationships
Standards - as one serving the emblem of a nation; something as accepted as a
basis
for comparison
Characteristics of Materials Used in Specific Projects
The student must relate material properties to product and process quality. These
are the factors that must be taken into consideration when choosing the right
material for their components and assemblies:
1. Selection of material
Material selection is one of the most common tasks for design engineering. The
ability to assess the material’s impact on the performance of a product is crucial for
reliable performance. Sometimes, buyers are also considering the label or name of
the company which are producing great quality of materials and are known in the
Note: Practice Personal Hygiene Protocols at all times.

market. Examples are the name HP for printer and Intel for some computer
hardware.
2. Testing of material
The testing of material properties is widely understood to be the key to obtaining

data for a project, performing failure analysis, or understanding material interactions.
Material testing also provides information on the quality of incoming and outgoing
products. Inspection test equipment and techniques are demonstrated for a wide
range of materials and assemblies during the class. This provides the participants
with both knowledge of the common failure modes.
3. Cost of material
The cost of material is also considered when buying or selecting materials for a
specific project. The amount may vary but never taken for granted the quality and the
reliability of the material. Will you buy material which is less expensive but worst
quality? Will you buy material which you cannot afford? People look for places which
can meet their standards and right cost for materials to buy.
Before planning and designing takes place, you should evaluate the material options
and system requirements. Teachers should add several useful reference manuals to
their libraries such as installation of hardware, networking, troubleshooting as well as
basic PC Operation and Internet for additional information that the students may
used in their projects.
The characteristic of the materials to be used for specific project must be:
 of good quality
 This is the most important factor when choosing materials to buy. Products
with good quality are long-lasting and safe to use because you know that it
follows certain standards before being commercialized.
 reliable
 It means that you can be sure that it will perform its function well, will
operate safely and will give the best it could give.
 suitable for the application/purposes

 Choose the materials which are very necessary to make the project
possible. Making a list of products/materials to buy is a good trait of a wise
consumer. Products which are not to be used must be crossed out.
 low cost
 It doesn’t mean that you will choose for the less expensive one and
exclude the quality. Low cost means you can afford to buy the materials
without hurting your pocket and assure of better quality.
Learning Competency with code
Assess Condition of Received Equipment - TLE_IACSS9-12AQS-Ia-1

o Obtain work instruction in accordance with standard operating procedures
Directions/ Instructions
Completion of this activity sheet will help you better understand the succeeding
activity sheet on Computer System Servicing (CSS).
Before you perform the instructions, read the background information for learners
and answer the exercise and activities provided to as certain to yourself and your
teacher that you have acquired the knowledge necessary to perform the skill portion
of the particular learning outcome.
Exercises / Activities
I. Enumerate the following. Use a separate sheet of paper in answering.
1. Give three factors to be considered when choosing the right material?

______________________________________________
______________________________________________
______________________________________________
2. Give three characteristic of materials to be used for specific project?
______________________________________________
______________________________________________
______________________________________________
II. What Good Quality means?
______________________________________________
______________________________________________
______________________________________________

Reflection (Learners must write own reflection about the activity taken)
References for learners
http://www.empf.org/empfasis/aug04/prop.htm
http://www.lakeland.cc.il.us/~internal/policymanual/10fiscalaffairs/1026.PO
L.htm
http://www.gao.gov/new.items/d0871.pdf
http://www.plant-materials.nrcs.usda.gov/pubs/nmpmcnl6045.pdf
http://www.cdpr.ca.gov
http://www.freepatentsonline.com
https://kapitolyohs.files.wordpress.com/2011/06/applying-quality-
standard.pdf

Answer Key
1. Selection of material, Testing of Material, Cost of Material
2. Good Quality, Reliable, Low Cost, Suitable for Project
3. The following are:

 Match the packing slip to the items received and ensures that the materials
are destined on tour department.
 That you are receiving materials indicated on the purchase order regard with
its quantity and discount.
 That the materials are in acceptable condition.
 The terms regarding installation and/or set-up of equipment are met.
Prepared by:
GASPAR HOWELL F. MINGA

Master Teacher II

Name of Learner: Grade Level: Section: Date: Learning Activity Sheet

Uploaded by

Copyright:

Available Formats

Name of Learner: Grade Level: Section: Date: Learning Activity Sheet

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Name of Learner: Grade Level: Section: Date: Learning Activity Sheet

Uploaded by

Copyright:

Available Formats

COMPUTER SYSTEM SERVICING

LEARNING ACTIVITY SHEET

APPLYING QUALITY STANDARDS

Background Information for Learners

Checklist - help organize data by category

Characteristics of Materials Used in Specific Projects

Note: Practice Personal Hygiene Protocols at all times.

The testing of material properties is widely understood to be the key to obtaining

 suitable for the application/purposes

Note: Practice Personal Hygiene Protocols at all times.

Learning Competency with code

Assess Condition of Received Equipment - TLE_IACSS9-12AQS-Ia-1

I. Enumerate the following. Use a separate sheet of paper in answering.

1. Give three factors to be considered when choosing the right material?

2. Give three characteristic of materials to be used for specific project?

II. What Good Quality means?

Note: Practice Personal Hygiene Protocols at all times.

References for learners

Note: Practice Personal Hygiene Protocols at all times.

1. Selection of material, Testing of Material, Cost of Material

2. Good Quality, Reliable, Low Cost, Suitable for Project

3. The following are:

GASPAR HOWELL F. MINGA

Note: Practice Personal Hygiene Protocols at all times.

You might also like