Scribd Logo
Upload

Welcome to Scribd!

  • 55 views

    XD9 Whisper Vane Transfer Pump: Varna

    Uploaded by

    pippo2378793
    The document discusses the VARNA Products XD9 Whisper Vane Transfer Pump. It provides specifications for the pump such as a flow rate up to 9 GPM, ability to handle pressures up to 100 PSI, and materials used. Installation considerations are also covered such as using appropriately sized plumbing and providing motor protection.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    XD9 Whisper Vane Transfer Pump: Varna

    Uploaded by

    pippo2378793
    55 views4 pages
    The document discusses the VARNA Products XD9 Whisper Vane Transfer Pump. It provides specifications for the pump such as a flow rate up to 9 GPM, ability to handle pressures up to 100 PSI, and materials used. Installation considerations are also covered such as using appropriately sized plumbing and providing motor protection.

    Original Description:

    oil pump

    Original Title

    XD9_OilPump

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses the VARNA Products XD9 Whisper Vane Transfer Pump. It provides specifications for the pump such as a flow rate up to 9 GPM, ability to handle pressures up to 100 PSI, and materials used. Installation considerations are also covered such as using appropriately sized plumbing and providing motor protection.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    55 views4 pages

    XD9 Whisper Vane Transfer Pump: Varna

    Uploaded by

    pippo2378793
    The document discusses the VARNA Products XD9 Whisper Vane Transfer Pump. It provides specifications for the pump such as a flow rate up to 9 GPM, ability to handle pressures up to 100 PSI, and materials used. Installation considerations are also covered such as using appropriately sized plumbing and providing motor protection.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    VARNA Products

    Engineered | Innovation

    XD9 Whisper Vane Transfer Pump


    Compact, Heavy Duty, Industrial, Quality 1HP IEC Metric Motor Flow rate up to 9 GPM or 34 LPM Pressure up to 100 psi or 6.9bar Unique Whisper-Vane design: Direct Shaft Coupling, Simple, Reliable, Efficient, Self Priming, Quiet Running, Compact, Long Life.

    Feature and Specifications Comparison Operating voltage Flow rate at 30psi (2 bar) Rated Pressure Whisper-Vane positive displacement technology, Self Priming SAE straight thread O-ring Ports (J1926 ISO 11926) (Not compatible with pipe thread ) Max Ambient air temperature Rated current in Amps. Motor service factor Max oil temperature Max oil viscosity

    60Hz 230/460 9 GPM (34 LPM)

    50Hz 200/400 28 LPM

    100psi (6.9 bar) >5ft (1.5m) -16 (1" or 25mm) 104f (40c) 3.2/1.6 3.8/1.9 1.15 392f (200c) ~6,000 cSt

    Wetted Materials: Carburized Carbon Steel Anodized Aluminum Viton

    VARNA Products
    4305 Business Dr. Cameron Park, CA 95682, USA www.VarnaProducts.com

    1 (888) 676-7770
    +1 (530) 676-7770 (International)
    Printed in USA 7/10/12 2008 VARNA Products

    VARNA Products XD9 Transfer Pump

    Engineers Corner

    General
    The XD9 pump delivers up to 9 gpm (34 l/m) of oil flow. It is a self-priming and quiet-running vane pump for use in a wide variety of transfer or circulating applications with non-corrosive fluids such as oils and coolants. It can handle fluids with poor lubricity or low film strength, and produce over 100 psi (6.9 bar) pressure.

    Plumbing Considerations
    Excessive pressure drop caused by small pipes can be detrimental to system performance. Relative to hydraulic pumps this is a high flow, low pressure pump, optimized for efficiency in transfer applications. Small suction hoses/pipes will starve the pump and reduce output flow by causing cavitation. Small pressure pipes will create excessive backpressure that will exceed the rating of the pump. Therefore, elbows and long runs of pipe should be avoided. Each elbow and each inch of pipe has a cumulative effect. Pluming loses with cold or high viscosity fluid can easily add up to a large percent of available pressure when the plumbing is too restrictive. The pump itself produces flow not pressure. Like a turnstile, every rotation of the pump delivers a metered volume to the other side. Whatever system is connected to the pump has flow resistance, which is the source of the backpressure as the pump works to maintain flow. It is recommended that hose or pipe no smaller than 1 (25mm) be used and that the suction hose in particular is kept as short as possible and no longer than 36.

    Motor Protection
    Class 20 motor protection in the motor starter is recommended.

    Application Engineering
    It is challenging to address every possible installation type. We are always happy to help in choosing an appropriate installation setup. Give us a call for engineering assistance and support. 888-676-7774

    Printed in USA

    7/10/12

    2008 VARNA Products

    XD-9 Pump Flow Performance


    0 10.0 9.0 8.0 7.0 Pump Flow (GPM) 6.0 5.0 4.0 3.0 2.0 1.0 0.0 0 10 20 30 40 50 60 70 80 90 100 Pump Pressure (psi) 5 0 20 15 10 35 30 25 1 2 Pump Pressure (Bar) 3 4 5 6

    XD-9 Motor Current Performance


    0 4.5 4.0 3.5 Motor Current (AMPS.) 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 10 20 30 40 50 60 70 80 90 100 Pump Pressure (psi) 1 2 Pump Pressure (Bar) 3 4 5 6

    Motor Full Load Rating

    Current @ 1400 cSt Current @ 1 cSt

    Pump Flow (LPM)

    You might also like