Scribd Logo
Upload

Welcome to Scribd!

  • 620 views

    Product Data: Extreme Service Castables

    Uploaded by

    didapopescu
    This document provides product data for Rescocast 17EG, an erosion resistant refractory concrete. Some key details include: - Rescocast 17EG is formulated for improved gunning characteristics and excellent physical properties at maximum service temperatures up to 2750°F. - Gunned samples have bulk densities around 135-128 pcf after heating and cold crushing strengths of 5,000-10,000 psi. - Laboratory rammed cast samples have slightly higher densities and strengths, around 6,000-13,000 psi after heating. - The product has low permanent linear shrinkage, around 0.0-0.4%, and erosion resistance of 14cc maximum after heating to

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Product Data: Extreme Service Castables

    Uploaded by

    didapopescu
    620 views2 pages
    This document provides product data for Rescocast 17EG, an erosion resistant refractory concrete. Some key details include: - Rescocast 17EG is formulated for improved gunning characteristics and excellent physical properties at maximum service temperatures up to 2750°F. - Gunned samples have bulk densities around 135-128 pcf after heating and cold crushing strengths of 5,000-10,000 psi. - Laboratory rammed cast samples have slightly higher densities and strengths, around 6,000-13,000 psi after heating. - The product has low permanent linear shrinkage, around 0.0-0.4%, and erosion resistance of 14cc maximum after heating to

    Original Description:

    fisa tehnica

    Original Title

    Rescocast 17EG PDS

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides product data for Rescocast 17EG, an erosion resistant refractory concrete. Some key details include: - Rescocast 17EG is formulated for improved gunning characteristics and excellent physical properties at maximum service temperatures up to 2750°F. - Gunned samples have bulk densities around 135-128 pcf after heating and cold crushing strengths of 5,000-10,000 psi. - Laboratory rammed cast samples have slightly higher densities and strengths, around 6,000-13,000 psi after heating. - The product has low permanent linear shrinkage, around 0.0-0.4%, and erosion resistance of 14cc maximum after heating to

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    620 views2 pages

    Product Data: Extreme Service Castables

    Uploaded by

    didapopescu
    This document provides product data for Rescocast 17EG, an erosion resistant refractory concrete. Some key details include: - Rescocast 17EG is formulated for improved gunning characteristics and excellent physical properties at maximum service temperatures up to 2750°F. - Gunned samples have bulk densities around 135-128 pcf after heating and cold crushing strengths of 5,000-10,000 psi. - Laboratory rammed cast samples have slightly higher densities and strengths, around 6,000-13,000 psi after heating. - The product has low permanent linear shrinkage, around 0.0-0.4%, and erosion resistance of 14cc maximum after heating to

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    PRODUCT DATA

    Extreme Service Castables


    Gunned Data
    Brand Name: Description:

    Rescocast 17EG
    RESCOCAST 17EG is an erosion resistant gunning mix refractory that has been formulated to have improved gunning characteristics and excellent physical properties. Data shown below are average results of tests following the guidelines set forth in ASTM C-903 "Preparing Refractory Concrete Specimens by Cold Gunning". 2750F (1510C)
    (Based on Gunned Samples)

    Maximum Service Temperature . Bulk Density (lb/ft ) After 230oF (110oC) o o After 1500 F (815 C) Cold Crushing Strength (lb/in 2) After 1500oF (815oC) Permanent Linear Change (%) Green to 1500oF (815oC) o o o o 230 F (110 C) to 1500 F (815 C) Erosion Loss using ASTM C-704 Method After 1500F (815C) Thermal Conductivity or "K" Factor
    Mean Temperature
    3

    135 128

    (2160 kg/m3) (2048 kg/m3)

    5,000 to 10,000

    (350-700 kg/cm2)

    0.0 to -0.4 0.0 to -0.3

    14cc (Maximum)

    500F (260C) 1000F (540C) 1500F (815C) Typical Chemical Analysis (%) Al 2O3 48.4 SiO 2 36.4 Fe 2O3 1.1 TiO 2 1.9 CaO 11.7

    BTU/ft 2/Hr/F/in. 8.5 8.2 8.4

    W/mK

    1.23 1.19 1.22

    MgO 0.2

    Alkalies 0.3

    Brand Code 1566, Typical Shelf Life 12 Months


    The properties shown on this data sheet represent typical average results generated using standard ASTM test methods (unless otherwise noted) conducted under controlled conditions (using standard rectangular shapes), and should not be considered to be guaranteed specifications. Properties are subject to normal manufacturing statistical standard deviation ranges, and Resco Products, Inc. reserves the right to modify the properties and specifications at any time without prior notice. RESCO PRODUCTS disclaims any express or implied warranties based on this sheet. 5/31/12 is the date that this data sheet was published. Check with your RESCO sales representative or RESCO'S website to determine if you have the most current sheet.

    CAST DATA SHOWN ON PAGE 2 Penn Center West, Building 2 - Suite 430, Pittsburgh, PA, 15276 Phone: 888-283-5505

    PRODUCT DATA
    Extreme Service Castables - Page 2
    Cast Data
    Brand Name:

    Rescocast 17EG

    RESCOCAST 17EG is an erosion resistant gunning mix that has been cast in the laboratory as a means of testing and controlling the quality of the product. It is not recommended that the material be applied in the field by casting application methods. Test results shown below are for LABORATORY RAMMED SPECIMENS ONLY. Sample Preparation Method: Typical Water Content (Ram) Bulk Density (pcf) After 230F (110C) : After 1500F (815C) : Cold Crushing Strength (psi) After 1500F (815C) : Permanent Linear Change (%) Green to 1500oF (815oC) o o o o 230 F (110 C) to 1500 F (815 C) Abrasion Resistance using ASTM C-704 Method After 1500F (815C) : Rammed 9.3 %

    141 133

    3 (2256 kg/m ) 3 (2128 kg/m )

    6,000 to 13,000

    2 (420-910 kg/cm )

    0.0 to -0.4 0.0 to -0.3

    14cc maximum

    5/31/12 is the date that this data sheet was published. Check with your RESCO sales representative or RESCO'S website to determine if you have the most current sheet.

    Penn Center West, Building 2 - Suite 430, Pittsburgh, PA, 15276

    Phone: 888-283-5505

    You might also like