VOLVO EXCAVATOR

EC210B LC
EC210B NLC

Engine power, gross: Contronics, Volvos advanced Strong digging equipment

119 kW 159 hp mode selection system and produced by robotic welding
Operating weight: electronically-controlled system High lifting, breakout and tearout
LC: 20.8 ~ 22.3 t 2 variable displacement axial forces for tough digging
45,950 ~ 49,260 lb piston pumps. Independent and conditions
NLC: 21.5 ~ 22.2 t simultaneous movements of the Undercarriage
47,460 ~ 48,900 lb digging equipment are controlled _ LC: Long undercarriage for
Buckets (SAE): by Automatic Sensing Work excellent stability
750 ~ 1,550 l Mode _ NLC: Narrow width for easier
0.98 ~ 2.03 yd3 Cab transportation
Ergonomic environment for Auxiliary hydraulic valve is
Turbocharged Volvo diesel easier operator use standard
engine with direct injection and Low sound level Prepared for a number of optional
charged air cooler meets Filtered air items
EPA Tier 2 emission standards Hydraulic dampening mounts
Fabric seat with heater and air
suspension
 ENGINE SWING SYSTEM
The engine is a turbocharged, 4-stroke diesel engine with The superstructure is swung by the means of an axial piston
water cooling, direct injection and charged air cooler that motor and a planetary reduction gear. Automatic swing
easily meets EPA Tier 2 emission standards. The engine has holding brake and anti-rebound valve are standard.
been developed especially for excavator use, providing good
fuel economy, low noise levels and a long service life. Max. swing speed . . . . . . . . . . . . . . . . . . . . . . . . 11.6 rpm
Air Filter: 3-stage and precleaner
Automatic Idling System: Reduces engine speed to idle
when the levers and pedals are not activated resulting in less
fuel consumption and low cab noise levels.
Low-Emission Engine:
Make . . . . . . . . . . . . . . . . . . . . . . . VOLVO
DRIVE
Model . . . . . . . . . . . . . . . . . . . . . . D6D EAE2
Power output at . . . . . . . . . . . . . . 32 r/s 1,900 rpm Each track is powered by an automatic two-speed shift
Net (ISO 9249/ travel motor. The track brakes are multi-disc, spring-applied
SAE J1349) . . . . . . . . . . . . 107 kW 143 hp and hydraulic released. The travel motor, brake and planetary
Gross (SAE J1995) . . . . . . . . . . 119 kW 159 hp gears are well protected within the track frame.
Max. torque . . . . . . . . . . . . . . . . . . 647 N.m at 1,425 rpm
477 lb.ft at 1,425 rpm Max. drawbar pull (tractive effort) . . . . . . . 183 kN
No. of cylinders . . . . . . . . . . . . . . . 6 41,230 lb
Displacement . . . . . . . . . . . . . . . . 5.7 l 348 cu.in Max. travel speed . . . . . . . . . . . . . . . . . . . . 3.2/5.5 km/h
Bore . . . . . . . . . . . . . . . . . . . . . . . 98 mm 3.86" 2.0/3.4 mph
Stroke . . . . . . . . . . . . . . . . . . . . . . 126 mm 4.96" Gradeability . . . . . . . . . . . . . . . . . . . . . . . . 35o 70%

ELECTRICAL SYSTEM UNDERCARRIAGE

High-capacity electrical system that is well protected. The undercarriage has a robust X-shaped frame. Greased
Waterproof double-lock harness plugs are used to secure and sealed track chains are standard.
corrosion-free connections. The main relays and solenoid
valves are shielded to prevent damage. The master switch is LC
standard. No. of track pads . . . . . . . . . . . 2 x 49
Link pitch . . . . . . . . . . . . . . . . . 190 mm 7.5"
Contronics provides advanced monitoring of machine
Shoe width, triple grouser . . . . 600/700/800(Std.)/900 mm
functions and important diagnostic information. 24"/28"/32"(Std.)/36"
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 V Shoe width, double grouser . . . 700 mm 28"
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x 12 V No. of bottom track rollers . . . . 2 x 9
Battery capacity . . . . . . . . . . . . . . . . . . . . . . . 150 Ah No. of top rollers . . . . . . . . . . . 2 x 2
Alternator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 V / 80 A
NLC
No. of track pads . . . . . . . . . . . 2 x 49
Link pitch . . . . . . . . . . . . . . . . . 190 mm 7.5"
Shoe width, triple grouser . . . . 500(Std.)/600/700 mm
20"(Std.)/24"/28"
No. of bottom track rollers . . . . 2 x 9
SERVICE REFILL CAPACITIES No. of top rollers . . . . . . . . . . . 2 x 2

Fuel tank
LC . . . . . . . . . . . . . . . . . . . . . . . . . 350 l 92 gal
NLC . . . . . . . . . . . . . . . . . . . . . . . 335 l 89 gal
Hydraulic system, total . . . . . . . . . . 295 l 78 gal
Hydraulic tank . . . . . . . . . . . . . . . . . 160 l 42 gal
Engine oil . . . . . . . . . . . . . . . . . . . . . 25 l 7 gal
Engine coolant . . . . . . . . . . . . . . . . 27.5 l 7 gal
Swing reduction unit . . . . . . . . . . . . 6l 1.6 gal
Travel reduction unit . . . . . . . . . . . . 2 x 5.8 l 2 x 1.5 gal
 HYDRAULIC SYSTEM CAB
The hydraulic system, also known as the Automatic Sensing The operators cab has easy access via a wide door opening.
Work Mode, is designed for high-productivity, high-digging The cab is supported on hydraulic dampening mounts to
capacity, high-maneuvering precision and good fuel economy. reduce shock and vibration levels. These along with sound
The summation system, boom, arm and swing priority along absorbing lining provide low noise levels. The cab has
with boom and arm regeneration provides optimum performance. excellent all-round visibility. The front windshield can easily
The following important functions are included in the system: slide up into the ceiling, and the lower front glass can be
removed and stored in the side door.
Summation system: Combines the flow of both hydraulic
pumps to ensure quick cycle times and high productivity. Integrated air-conditioning and heating system:
Boom priority: Gives priority to the boom operation for faster The pressurized and filtered cab air is supplied by an auto-
raising when loading or performing deep excavations. matically-controlled fan. The air is distributed throughout the
cab from 13 vents.
Arm priority: Gives priority to the arm operation for faster
cycle times in leveling and for increased bucket filling when Ergonomic operators seat: The adjustable seat and joystick
digging. console move independently to accommodate the operator.
Swing priority: Gives priority to swing functions for faster The seat has nine different adjustments plus a seat belt for
simultaneous operations. the operators comfort and safety.
Regeneration system: Prevents cavitation and provides flow to
Sound Level:
other movements during simultaneous operations for maximum
Sound level in cab
productivity.
according to ISO 6396 . . . . . . . . . . . . . LpA 72 dB(A)
Power boost: All digging and lifting forces are increased. External sound level
according to ISO 6395
Holding valves: Boom and arm holding valves prevent the
and EU Directive 2000/14/EC . . . . . . . LwA 102 dB(A)
digging equipment from creeping.

Main pump:
Type . . . . . . . . . . . 2 x variable displacement axial piston pumps
Maximum flow . . . 2 x 200 l/min 2 x 53 gpm
Pilot pump:
Type . . . . . . . . . . . Gear pump
Maximum flow . . . 1 x 19 l/min 5 gpm
Hydraulic motors:
Travel . . . . . . . . . . Variable displacement axial piston motors
Swing . . . . . . . . . . Fixed displacement axial piston motor with
mechanical brake
Relief valve setting:
Implement . . . . . . . 32.4/34.3 Mpa 4,690/4,980 psi
Travel circuit . . . . . 34.3 Mpa 4,980 psi
Swing circuit . . . . 26.5 Mpa 3,840 psi
Pilot circuit . . . . . . 3.9 Mpa 570 psi
Hydraulic cylinders:
Boom . . . . . . . . . . 2
Bore x Stroke . . 125 x 1,235 mm
4.9" x 48.6"
Arm . . . . . . . . . . . . 1
Bore x Stroke . . 135 x 1,540 mm
5.3" x 60.6"
Bucket . . . . . . . . . 1
Bore x Stroke . . 120 x 1,065 mm
4.7" x 41.9"
 GROUND PRESSURE

Long crawler machine with Std. 5.7 m, 18' 8" boom, Std. 2.9 m, 9' 6" arm, 740 kg, 1,630 lb bucket
and 3,700 kg, 8,160 lb counterweight
Description Shoe width Operating weight Ground pressure Overall width
600 mm 20,840 kg 43.2 kPa 2,990 mm
24" 45,950 lb 6.3 psi 9' 10"
700 mm 21,290 kg 37.8 kPa 3,090 mm
Triple grouser 28" 46,940 lb 5.5 psi 10' 2"
800 mm 21,560 kg 33.5 kPa 3,190 mm
32" 47,540 lb 4.9 psi 10' 6"
900 mm 21,840 kg 30.2 kPa 3,290 mm
36" 48,160 lb 4.4 psi 10' 10"
700 mm 21,590 kg 38.4 kPa 3,090 mm
Double grouser
28" 47,610 lb 5.6 psi 10' 2"

Long crawler machine with Std. 5.7 m, 18' 8" boom, Std. 2.9 m, 9' 6" arm, 740 kg, 1,630 lb bucket
and 4,200 kg, 9,260 lb counterweight
Description Shoe width Operating weight Ground pressure Overall width
600 mm 21,340 kg 44.3 kPa 2,990 mm
24" 47,050 lb 6.4 psi 9' 10"
700 mm 21,790 kg 38.7 kPa 3,090 mm
Triple grouser 28" 48,050 lb 5.6 psi 10' 2"
800 mm 22,060 kg 34.3 kPa 3,190 mm
32" 48,640 lb 5.0 psi 10' 6"
900 mm 22,340 kg 30.9 kPa 3,290 mm
36" 49,260 lb 4.5 psi 10' 10"
700 mm 22,090 kg 39.3 kPa 3,090 mm
Double grouser
28" 48,710 lb 5.7 psi 10' 2"

Narrow long crawler machine with Std. 5.7 m, 18' 8" boom, Std. 2.9 m, 9' 6" arm, 740 kg, 1,630 lb bucket
and 4,800 kg, 10,580 lb counterweight
Description Shoe width Operating weight Ground pressure Overall width
500 mm 21,525 kg 53.6 kPa 2,540 mm
20" 47,460 lb 7.8 psi 8' 4"
600 mm 21,725 kg 45.1 kPa 2,640 mm
Triple grouser 24" 47,900 lb 6.5 psi 8' 8"
700 mm 22,175 kg 39.4 kPa 2,740 mm
28" 48,900 lb 5.7 psi 9' 0"
 MAX. PERMITTED BUCKETS
Note: 1. Bucket size based on ISO 7451, heaped material with a 1:1 angle of repose.
2. Max. permitted sizes are for reference only and are not necessarily available from the factory.

Max. permitted sizes for pin-on buckets: Long crawler machine with counterweight 3,700 kg, 8,160 lb
Boom Std. 5.7 m, 18' 8"
Unit
Arm 2.5 m, 8' 2" Std. 2.9 m, 9' 6" HD 2.9 m, 9' 6" 3.9 m, 12' 10"
3 3 3
GP bucket 1.5 t/m , 2,530 lb/yd l, yd 1,450, 1.90 1,350, 1.77 1,325, 1.73 1,150, 1.50
3 3 3
GP bucket 1.8 t/m , 3,030 lb/yd l, yd 1,250, 1.64 1,175, 1.54 1,150, 1.50 1,000, 1.31
RB bucket 1.8 t/m3, 3,030 lb/yd3 l, yd3 1,100, 1.44 1,050, 1.37 1,025, 1.34 900, 1.18
3 3 3
RB bucket 2.0 t/m , 3,370 lb/yd l, yd 1,025, 1.34 975, 1.28 950, 1.24 825, 1.08

Max. permitted sizes for hook-on buckets: Long crawler machine with counterweight 3,700 kg, 8,160 lb
Boom Std. 5.7 m, 18' 8"
Unit
Arm 2.5 m, 8' 2" Std. 2.9 m, 9' 6" HD 2.9 m, 9' 6" 3.9 m, 12' 10"
3 3 3
GP bucket 1.5 t/m , 2,530 lb/yd l, yd 1,375, 1.80 1,275, 1.67 1,250, 1.64 1,100, 1.44
3 3 3
GP bucket 1.8 t/m , 3,030 lb/yd l, yd 1,200, 1.57 1,125, 1.47 1,100, 1.44 950, 1.24
3 3 3
RB bucket 1.8 t/m , 3,030 lb/yd l, yd 1,200, 1.57 1,125, 1.47 1,100, 1.44 950, 1.24
RB bucket 2.0 t/m3, 3,370 lb/yd3 l, yd3 1,050, 1.37 1,000, 1.31 975, 1.28 850, 1.11

Max. permitted sizes for pin-on buckets: Long crawler machine with counterweight 4,200 kg, 9,260 lb
Boom Std. 5.7 m, 18' 8"
Unit
Arm 2.5 m, 8' 2" Std. 2.9 m, 9' 6" HD 2.9 m, 9' 6" 3.9 m, 12' 10"
GP bucket 1.5 t/m3, 2,530 lb/yd3 l, yd3 1,550, 2.03 1,450, 1.90 1,425, 1.86 1,250, 1.64
3 3
GP bucket 1.8 t/m , 3,030 lb/yd l, yd3 1,350, 1.77 1,275, 1.67 1,250, 1.64 1,100, 1.44
3 3 3
RB bucket 1.8 t/m , 3,030 lb/yd l, yd 1,200, 1.57 1,125, 1.47 1,100, 1.44 950, 1.24
3 3 3
RB bucket 2.0 t/m , 3,370 lb/yd l, yd 1,100, 1.44 1,025, 1.34 1,000, 1.31 900, 1.18

Max. permitted sizes for hook-on buckets: Long crawler machine with counterweight 4,200 kg, 9,260 lb
Boom Std. 5.7 m, 18' 8"
Unit
Arm 2.5 m, 8' 2" Std. 2.9 m, 9' 6" HD 2.9 m, 9' 6" 3.9 m, 12' 10"
3 3 3
GP bucket 1.5 t/m , 2,530 lb/yd l, yd 1,475, 1.93 1,375, 1.80 1,350, 1.77 1,175, 1.54
3 3 3
GP bucket 1.8 t/m , 3,030 lb/yd l, yd 1,300, 1.70 1,200, 1.57 1,175, 1.54 1,025, 1.34
RB bucket 1.8 t/m3, 3,030 lb/yd3 l, yd3 1,300, 1.70 1,200, 1.57 1,175, 1.54 1,025, 1.34
3 3 3
RB bucket 2.0 t/m , 3,370 lb/yd l, yd 1,150, 1.50 1,075, 1.41 1,050, 1.37 900, 1.18

Max. permitted sizes for pin-on buckets: Narrow long crawler machine with counterweight 4,800 kg, 10,580 lb
Boom Std. 5.7 m, 18' 8"
Unit
Arm 2.5 m, 8' 2" Std. 2.9 m, 9' 6" HD 2.9 m, 9' 6" 3.9 m, 12' 10"
3 3 3
GP bucket 1.5 t/m , 2,530 lb/yd l, yd 1,375, 1.80 1,300, 1.70 1,275, 1.67 1,175, 1.54
3 3 3
GP bucket 1.8 t/m , 3,030 lb/yd l, yd 1,200, 1.57 1,125, 1.47 1,000, 1.31 975, 1.28
3 3 3
RB bucket 1.8 t/m , 3,030 lb/yd l, yd 1,075, 1.41 1,000, 1.31 975, 1.28 850, 1.11
RB bucket 2.0 t/m3, 3,370 lb/yd3 l, yd3 1,000, 1.31 925, 1.21 900, 1.18 800, 1.05

Max. permitted sizes for hook-on buckets: Narrow long crawler machine with counterweight 4,800 kg, 10,580 lb
Boom Std. 5.7 m, 18' 8"
Unit
Arm 2.5 m, 8' 2" Std. 2.9 m, 9' 6" HD 2.9 m, 9' 6" 3.9 m, 12' 10"
GP bucket 1.5 t/m3, 2,530 lb/yd3 l, yd3 1,325, 1.73 1,225, 1.60 1,200, 1.57 1,050, 1.37
3 3
GP bucket 1.8 t/m , 3,030 lb/yd l, yd3 1,150, 1.50 1,075, 1.41 1,050, 1.37 925, 1.21
3 3 3
RB bucket 1.8 t/m , 3,030 lb/yd l, yd 1,025, 1.34 950, 1.24 925, 1.21 800, 1.05
3 3 3
RB bucket 2.0 t/m , 3,370 lb/yd l, yd 950, 1.24 875, 1.14 850, 1.11 750, 0.98
 DIMENSIONS

L A

C
M

F
K

J
G I
H B

Long crawler machine

Boom Std. 5.7 m, 18' 8"
Unit
Arm 2.5 m, 8' 2" Std. 2.9 m, 9' 6" 3.9 m, 12' 10"
A. Overall width of superstructure mm, ft-in 2,700, 8' 10" 2,700, 8' 10" 2,700, 8' 10"
B. Overall width mm, ft-in 3,190, 10' 6" 3,190, 10' 6" 3,190, 10' 6"
C. Overall height of cab mm, ft-in 2,930, 9' 7" 2,930, 9' 7" 2,930, 9' 7"
D. Tail swing radius mm, ft-in 2,850, 9' 4" 2,850, 9' 4" 2,850, 9' 4"
E. Overall height of engine hood mm, ft-in 2,330, 7' 8" 2,330, 7' 8" 2,330, 7' 8"
F. Counterweight clearance * mm, ft-in 1,025, 3' 4" 1,025, 3' 4" 1,025, 3' 4"
G. Tumbler length mm, ft-in 3,660, 12' 0" 3,660, 12' 0" 3,660, 12' 0"
H. Track length mm, ft-in 4,460, 14' 8" 4,460, 14' 8" 4,460, 14' 8"
I. Track gauge mm, ft-in 2,390, 7' 10" 2,390, 7' 10" 2,390, 7' 10"
J. Shoe width mm, in 800, 32" 800, 32" 800, 32"
K. Min. ground clearance * mm, ft-in 460, 1' 6" 460, 1' 6" 460, 1' 6"
L. Overall length mm, ft-in 9,750, 32' 0" 9,690, 31' 9" 9,670, 31' 9"
M. Overall height of boom mm, ft-in 3,120, 10' 3" 3,000, 9' 10" 3,550, 11' 8"
* Without shoe grouser
 DIMENSIONS

Narrow long crawler machine

Boom Std. 5.7 m, 18' 8"
Unit
Arm 2.5 m, 8' 2" Std. 2.9 m, 9' 6" 3.9 m, 12' 10"
A. Overall width of superstructure mm, ft-in 2,540, 8' 4" 2,540, 8' 4" 2,540, 8' 4"
B. Overall width mm, ft-in 2,540, 8' 4" 2,540, 8' 4" 2,540, 8' 4"
C. Overall height of cab mm, ft-in 2,930, 9' 7" 2,930, 9' 7" 2,930, 9' 7"
D. Tail swing radius mm, ft-in 2,750, 9' 0" 2,750, 9' 0" 2,750, 9' 0"
E. Overall height of engine hood mm, ft-in 2,330, 7' 8" 2,330, 7' 8" 2,330, 7' 8"
F. Counterweight clearance * mm, ft-in 1,025, 3' 4" 1,025, 3' 4" 1,025, 3' 4"
G. Tumbler length mm, ft-in 3,660, 12' 0" 3,660, 12' 0" 3,660, 12' 0"
H. Track length mm, ft-in 4,460, 14' 8" 4,460, 14' 8" 4,460, 14' 8"
I. Track gauge mm, ft-in 2,040, 6' 8" 2,040, 6' 8" 2,040, 6' 8"
J. Shoe width mm, in 500, 20" 500, 20" 500, 20"
K. Min. ground clearance * mm, ft-in 460, 1' 6" 460, 1' 6" 460, 1' 6"
L. Overall length mm, ft-in 9,650, 31' 8" 9,590, 31' 6" 9,570, 31' 5"
M. Overall height of boom mm, ft-in 3,120, 10' 3" 3,000, 9' 10" 3,550, 11' 8"
* Without shoe grouser

Boom

Height

Length

5.7 m, 18' 8"

Description
Standard Heavy-duty
Length 5,910 mm, 19' 5" 5,910 mm, 19' 5"
Height 1,585 mm, 5' 2" 1,585 mm, 5' 2"
Width 670 mm, 2' 2" 670 mm, 2' 2"
Weight 1,785 kg, 3,940 lb 1,890 kg, 4,170 lb
* Includes cylinder, pin and piping

Arm

Height

Length

2.9 m, 9' 6"

Description 2.5 m, 8' 2" 3.9 m, 12' 10"
Standard Heavy-duty
Length 3,530 mm, 11' 7" 3,900 mm, 12' 10" 3,900 mm, 12' 10" 4,940 mm, 16' 2"
Height 880 mm, 2' 11" 880 mm, 2' 11" 880 mm, 2' 11" 820 mm, 2' 8"
Width 440 mm, 1' 5" 440 mm, 1' 5" 440 mm, 1' 5" 440 mm, 1' 5"
Weight 975 kg, 2,150 lb 1,000 kg, 2,210 lb 1,085 kg, 2,390 lb 1,135 kg, 2,500 lb
* Includes cylinder, piping and linkage
 WORKING RANGES & DIGGING FORCES

A
B
H

C D E

Machine with pin-on bucket

Boom Std. 5.7 m, 18' 8"
Unit
Arm 2.5 m, 8' 2" Std. 2.9 m, 9' 6" 3.9 m, 12' 10"
A. Max. digging reach mm, ft-in 9,540, 31' 4" 9,940, 32' 7" 10,760, 35' 4"
B. Max. digging reach on ground mm, ft-in 9,350, 30' 8" 9,750, 32' 0" 10,610, 34' 10"
C. Max. digging depth mm, ft-in 6,330, 20' 9" 6,730, 22' 1" 7,730, 25' 4"
D. Max. digging depth (8' level) mm, ft-in 6,110, 20' 1" 6,510, 21' 4" 7,550, 24' 9"
E. Max. vertical wall digging depth mm, ft-in 5,520, 18' 1" 5,830, 19' 2" 6,570, 21' 7"
F. Max. cutting height mm, ft-in 9,220, 30' 3" 9,450, 31' 0" 9,620, 31' 7"
G. Max. dumping height mm, ft-in 6,430, 21' 1" 6,650, 21' 10" 6,850, 22' 6"
H. Min. front swing radius mm, ft-in 3,670, 12' 0" 3,650, 12' 0" 3,640, 11' 11"

Digging forces with pin-on bucket

Boom Std. 5.7 m, 18' 8"
Unit
Arm 2.5 m, 8' 2" Std. 2.9 m, 9' 6" 3.9 m, 12' 10"
Bucket tip radius mm, in 1,470, 58" 1,470, 58" 1,470, 58"
Breakout force _ bucket kN 122.6/130.4 122.6/130.4 122.6/130.4
SAE
(Normal/Power boost) lb 27,560/29,330 27,560/29,330 27,560/29,330
Teaout force _ arm kN 110.4/117.2 95.6/103.0 80.2/86.3
SAE
(Normal/Power boost) lb 24,830/26,350 21,500/23,150 18,040/19,400
Rotation angle, bucket deg 175 o 175 o 174 o
 LIFTING CAPACITY (At the arm end without bucket)
Note: For lifting capacity including bucket, simply subtract actual weight of the pin-on bucket or the bucket with quick coupler from the following values.

EC210B LC (Std. shoe 800 mm, 32", counterweight 3,700 kg, 8,160 lb)
Across Lifting
under- hook 3.0 m, 10' 4.5 m, 15' 6.0 m, 20' 7.5 m, 25' Max. reach
carriage
related
Along to ground Max.
under- level
carriage t lb t lb t lb t lb t lb t lb t lb t lb t lb t lb m / ft

7.5 25' *5.4 *11,850 *5.4 *11,850 5.6 / 18.0

6.0 20' *5.2 *11,430 5.1 11,040 *5.3 *11,650 4.1 9,170 6.9 / 22.3

Std. boom 4.5 15' *6.6 *14,260 *6.6 *14,260 *5.7 *12,380 5.0 10,730 5.3 11,740 3.4 7,560 7.6 / 24.8
5.7 m 3.0 10' *8.5 *18,280 7.2 15,560 *6.5 *14,120 4.7 10,220 5.3 11,430 3.4 7,310 4.8 10,630 3.1 6,790 8.0 / 26.2
18' 8"
+ 1.5 5' *10.1 *21,890 6.7 14,520 7.3 15,630 4.5 9,730 5.2 11,190 3.3 7,090 4.7 10,260 3.0 6,510 8.1 / 26.5
Arm
2.5 m 0 0' *10.9 *23,570 6.5 14,020 7.1 15,260 4.4 9,400 5.1 11,020 3.2 6,930 4.8 10,520 3.0 6,630 7.9 / 25.8
8' 2"
-1.5 -5' *9.8 *22,490 *9.8 *22,490 *10.8 *23,420 6.5 13,950 7.0 15,140 4.3 9,300 5.2 11,580 3.3 7,270 7.4 / 24.1

-3.0 -10' *13.9 *30,080 12.9 27,550 *9.9 *21,480 6.6 14,160 7.1 15,330 4.4 9,460 6.4 14,220 4.0 8,850 6.5 / 21.1

-4.5 -15' *10.7 *22,880 *10.7 *22,880 *7.7 *16,140 6.9 14,810 *6.7 *14,800 6.0 13,560 5.0 / 16.0

7.5 25' *4.5 *9,950 *4.5 *9,950 6.2 / 19.9

6.0 20' *4.8 *10,550 *4.8 *10,550 *4.2 *9,210 3.7 8,350 7.3 / 23.8

Std. boom 4.5 15' *5.3 *11,630 5.1 10,890 *5.0 *11,090 3.5 7,600 *4.1 *9,050 3.2 7,020 8.0 / 26.2
5.7 m 3.0 10' *8.0 *17,130 7.4 15,860 *6.2 *13,470 4.8 10,360 5.4 11,520 3.4 7,390 *4.2 *9,290 2.9 6,360 8.4 / 27.5
18' 8"
+ 1.5 5' *9.8 *21,040 6.8 14,720 *7.1 *15,430 4.6 9,820 5.2 11,240 3.3 7,130 4.4 9,600 2.8 6,100 8.5 / 27.8
Std. arm
2.9 m 0 0' *4.9 *11,410 *4.9 *11,410 *10.7 *23,250 6.5 14,090 7.1 15,310 4.4 9,440 5.1 11,030 3.2 6,940 4.5 9,810 2.8 6,190 8.3 / 27.1
9' 6"
-1.5 -5' *9.4 *21,340 *9.4 *21,340 *10.9 *23,610 6.5 13,910 7.0 15,120 4.3 9,270 5.1 10,970 3.2 6,880 4.8 10,670 3.0 6,710 7.8 / 25.5

-3.0 -10' *14.7 *31,860 12.7 27,270 *10.3 *22,210 6.5 14,050 7.1 15,210 4.3 9,350 5.7 12,730 3.6 7,960 6.9 / 22.7

-4.5 -15' *12.0 *25,640 *12.0 *25,640 *8.5 *18,130 6.7 14,540 *6.5 *14,330 5.0 11,260 5.6 / 18.0

7.5 25' *3.4 *7,510 *3.4 *7,510 7.3 / 23.5

6.0 20' *4.0 *8,890 3.7 7,960 *3.2 *7,140 3.1 6,950 8.3 / 26.9

Std. boom 4.5 15' *4.3 *9,360 3.6 7,800 *3.2 *7,090 2.7 5,990 8.9 / 29.1
5.7 m 3.0 10' *6.4 *13,820 *6.4 *13,820 *5.3 *11,520 4.9 10,630 *4.8 *10,370 3.5 7,500 *3.3 *7,310 2.5 5,470 9.2 / 30.2
18' 8"
+ 1.5 5' *8.2 *19,420 *8.2 *19,420 *8.5 *18,300 7.0 15,170 *6.4 *13,780 4.6 9,970 5.2 11,290 3.3 7,160 *3.5 *7,790 2.4 5,250 9.3 / 30.5
Arm
3.9 m 0 0' *6.9 *15,890 *6.9 *15,890 *10.0 *21,620 6.6 14,170 7.1 15,330 4.4 9,430 5.1 10,970 3.2 6,860 3.8 8,420 2.4 5,280 9.1 / 29.9
12' 10"
-1.5 -5' *9.1 *20,680 *9.1 *20,680 *10.7 *23,190 6.4 13,690 7.0 14,960 4.2 9,110 5.0 10,770 3.1 6,680 4.1 8,970 2.5 5,600 8.7 / 28.5

-3.0 -10' *12.8 *29,020 12.3 26,330 *10.6 *23,040 6.3 13,610 6.9 14,870 4.2 9,020 5.0 10,760 3.1 6,680 4.6 10,240 2.9 6,370 7.9 / 25.9

-4.5 -15' *14.2 *30,580 12.6 26,950 *9.7 *20,950 6.4 13,870 7.0 15,080 4.3 9,210 5.9 13,140 3.6 8,130 6.8 / 22.0

Notes: 1. Machine in Fine Mode-F (Power Boost) for lifting capacities.

2. The above loads are in compliance with SAE J1097 and ISO 10567 Hydraulic Excavator Lifting Capacity Standards.
3. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.
4. Rated loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
5. Contains metric and U.S. measurement charts.
 LIFTING CAPACITY (At the arm end without bucket)
Note: For lifting capacity including bucket, simply subtract actual weight of the pin-on bucket or the bucket with quick coupler from the following values.

EC210B LC (Std. shoe 800 mm, 32", counterweight 4,200 kg, 9,260 lb)
Across Lifting
under- hook 3.0 m, 10' 4.5 m, 15' 6.0 m, 20' 7.5 m, 25' Max. reach
carriage
related
Along to ground Max.
under- level
carriage t lb t lb t lb t lb t lb t lb t lb t lb t lb t lb m / ft

7.5 25' *5.4 *11,850 *5.4 *11,850 5.6 / 18.0

6.0 20' *5.2 *11,430 *5.2 *11,430 *5.3 *11,650 4.4 9,740 6.9 / 22.3

Std. boom 4.5 15' *6.6 *14,260 *6.6 *14,260 *5.7 *12,380 5.3 11,370 *5.4 *11,810 3.6 8,060 7.6 / 24.8
5.7 m 3.0 10' *8.5 *18,280 7.6 16,500 *6.5 *14,120 5.0 10,870 5.6 12,040 3.6 7,800 5.1 11,210 3.3 7,260 8.0 / 26.2
18' 8"
+ 1.5 5' *10.1 *21,890 7.2 15,460 *7.4 15,930 4.8 10,370 5.5 11,800 3.5 7,580 4.9 10,830 3.2 6,970 8.1 / 26.5
Arm
2.5 m 0 0' *10.9 *23,570 6.9 14,970 7.5 16,090 4.7 10,040 5.4 11,630 3.4 7,420 5.0 11,110 3.2 7,100 7.9 / 25.8
8' 2"
-1.5 -5' *9.8 *22,490 *9.8 *22,490 *10.8 *23,420 6.9 14,890 7.4 15,980 4.6 9,940 5.5 12,220 3.5 7,780 7.4 / 24.1

-3.0 -10' *13.9 *30,080 13.7 29,310 *9.9 *21,480 7.0 15,110 *7.3 *15,730 4.7 10,110 *6.6 *14,550 4.3 9,450 6.5 / 21.1

-4.5 -15' *10.7 *22,880 *10.7 *22,880 *7.7 *16,140 7.3 15,750 *6.7 *14,800 6.3 14,430 5.0 / 16.0

7.5 25' *4.5 *9,950 *4.5 *9,950 6.2 / 19.9

6.0 20' *4.8 *10,550 *4.8 *10,550 *4.2 *9,210 4.0 8,870 7.3 / 23.8

Std. boom 4.5 15' *5.3 *11,630 *5.3 11,530 *5.0 *11,090 3.8 8,090 *4.1 *9,050 3.4 7,480 8.0 / 26.2
5.7 m 3.0 10' *8.0 *17,130 7.8 16,800 *6.2 *13,470 5.1 11,000 *5.4 *11,830 3.7 7,880 *4.2 *9,290 3.1 6,790 8.4 / 27.5
18' 8"
+ 1.5 5' *9.8 *21,040 7.3 15,660 *7.1 *15,430 4.9 10,470 5.5 11,850 3.5 7,620 *4.5 *9,920 3.0 6,530 8.5 / 27.8
Std. Arm
2.9 m 0 0' *4.9 *11,410 *4.9 *11,410 *10.7 *23,250 7.0 15,040 7.5 16,140 4.7 10,080 5.4 11,640 3.4 7,430 4.7 10,360 3.0 6,640 8.3 / 27,1
9' 6"
-1.5 -5' *9.4 *21,340 *9.4 *21,340 *10.9 *23,610 6.9 14,860 7.4 15,950 4.6 9,920 5.4 11,580 3.4 7,370 5.1 11,270 3.3 7,190 7.8 / 25.5

-3.0 -10' *14.7 *31,860 13.5 29,030 *10.3 *22,210 7.0 14,990 7.4 16,040 4.6 10,000 6.0 13,430 3.8 8,510 6.9 / 22.7

-4.5 -15' *12.0 *25,640 *12.0 *25,640 *8.5 *18,130 7.2 15,480 *6.5 *14,330 5.3 11,990 5.6 / 18.0

7.5 25' *3.4 *7,510 *3.4 *7,510 7.3 / 23.5

6.0 20' *4.0 *8,890 3.9 8,450 *3.2 *7,140 *3.2 *7,140 8.3 / 26.9

Std. boom 4.5 15' *4.3 *9,360 3.9 8,290 *3.2 *7,090 2.9 6,400 8.9 / 29.1
5.7 m 3.0 10' *6.4 *13,820 *6.4 *13,820 *5.3 *11,520 5.2 11,280 *4.8 *10,370 3.7 7,990 *3.3 *7,310 2.7 5,860 9.2 / 30.2
18' 8"
+ 1.5 5' *8.2 *19,420 *8.2 *19,420 *8.5 *18,300 7.5 16,110 *6.4 *13,780 4.9 10,620 *5.3 *11,590 3.6 7,650 *3.5 *7,790 2.6 5,630 9.3 / 30.5
Arm
3.9 m 0 0' *6.9 *15,890 *6.9 *15,890 *10.0 *21,620 7.0 15,110 *7.2 *15,710 4.7 10,070 5.4 11,580 3.4 7,350 *3.9 *8,630 2.6 5,670 9.1 / 29.9
12' 10"
-1.5 -5' *9.1 *20,680 *9.1 *20,680 *10.7 *23,190 6.8 16,430 7.3 15,800 4.5 9,750 5.3 11,380 3.3 7,170 4.3 9,490 2.7 6,020 8.7 / 28.5

-3.0 -10' *12.8 *29,020 *12.8 28,080 *10.6 *23,040 6.8 14,550 7.3 15,700 4.5 9,660 5.3 11,370 3.3 7,160 4.9 10,820 3.1 6,840 7.9 / 25.9

-4.5 -15' *14.2 *30,580 13.4 28,710 *9.7 *20,950 6.9 14,810 *7.1 *15,260 4.6 9,860 *6.0 *13,320 3.9 8,700 6.8 / 22.0

Notes: 1. Machine in Fine Mode-F (Power Boost) for lifting capacities.

2. The above loads are in compliance with SAE J1097 and ISO 10567 Hydraulic Excavator Lifting Capacity Standards.
3. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.
4. Rated loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
5. Contains metric and U.S. measurement charts.
 LIFTING CAPACITY (At the arm end without bucket)
Note: For lifting capacity including bucket, simply subtract actual weight of the pin-on bucket or the bucket with quick coupler from the following values.

EC210B NLC (Std. shoe 500 mm, 20", counterweight 4,800 kg, 10,580 lb)
Across Lifting
under- hook 3.0 m, 10' 4.5 m, 15' 6.0 m, 20' 7.5 m, 25' Max. reach
carriage
related
Along to ground Max.
under- level
carriage t lb t lb t lb t lb t lb t lb t lb t lb t lb t lb m / ft

7.5 25' *5.4 *11,850 5.3 *11,850 5.6 / 18.0

6.0 20' *5.2 *11,430 4.8 10,300 *5.3 *11,650 3.8 8,580 6.9 / 22.3

Std. boom 4.5 15' *6.6 *14,260 *6.6 *14,260 *5.7 *12,380 4.6 10,000 *5.4 *11,810 3.2 7,080 7.6 / 24.8
5.7 m 3.0 10' *8.5 *18,280 6.6 14,260 *6.5 *14,120 4.4 9,510 *5.6 12,190 3.2 6,840 5.1 11,350 2.9 6,360 8.0 / 26.2
18' 8"
+ 1.5 5' *10.1 *21,890 6.1 13,270 *7.4 *15,930 4.2 9,030 5.5 11,950 3.1 6,620 5.0 10,970 2.8 6,090 8.1 / 26.5
Arm
2.5 m 0 0' *10.9 *23,570 5.9 12,800 7.6 16,290 4.0 8,710 5.5 11,780 3.0 6,480 5.1 11,250 2.8 6,200 7.9 / 25.8
8' 2"
-1.5 -5' *9.8 *22,490 *9.8 *22,490 *10.8 *23,420 5.9 12,730 7.5 16,180 4.0 8,610 5.6 12,380 3.1 6,780 7.4 / 24.1

-3.0 -10' *13.9 *30,080 11.2 24,150 *9.9 *21,480 6.0 12,940 *7.3 *15,730 4.1 8,770 *6.6 *14,550 3.7 8,220 6.5 / 21.1

-4.5 -15' *10.7 *22,880 *10.7 *22,880 *7.7 *16,140 6.3 13,550 *6.7 *14,800 5.5 12,460 5.0 / 16.0

7.5 25' *4.5 *9,950 *4.5 *9,950 6.2 / 19.9

6.0 20' *4.8 *10,550 *4.8 10,480 *4.2 *9,210 3.5 7,830 7.3 / 23.8

Std. boom 4.5 15' *5.3 *11,630 4.7 10,150 *5.0 *11,090 3.3 7,130 *4.1 *9,050 3.0 6,580 8.0 / 26.2
5.7 m 3.0 10' *8.0 *17,130 6.7 14,550 *6.2 *13,470 4.5 9,640 *5.4 *11,830 3.2 6,920 *4.2 *9,290 2.7 5,960 8.4 / 27.5
18' 8"
+ 1.5 5' *9.8 *21,040 6.2 13,470 *7.1 *15,430 4.2 9,120 5.6 12,000 3.1 6,670 *4.5 *9,920 2.6 5,720 8.5 / 27.8
Std. Arm
2.9 m 0 0' *4.9 *11,410 *4.9 *11,410 *10.7 *23,250 6.0 12,870 7.6 16,340 4.1 8,750 5.5 11,790 3.0 6,480 4.8 10,490 2.6 5,800 8.3 / 27,1
9' 6"
-1.5 -5' *9.4 *21,340 *9.4 *21,340 *10.9 *23,610 5.9 12,700 7.5 16,160 4.0 8,590 5.4 11,730 3.0 6,420 5.2 11,410 2.8 6,270 7.8 / 25.5

-3.0 -10' *14.7 *31,860 11.1 23,890 *10.3 *22,210 5.9 12,830 7.5 16,250 4.0 8,670 6.1 13,600 3.3 7,410 6.9 / 22.7

-4.5 -15' *12.0 *25,640 11.5 24,670 *8.5 *18,130 6.2 13,290 *6.5 *14,330 4.6 10,400 5.6 / 18.0

7.5 25' *3.4 *7,510 *3.4 *7,510 7.3 / 23.5

6.0 20' *4.0 *8,890 3.5 7,470 *3.2 *7,140 2.9 6,520 8.3 / 26.9

Std. boom 4.5 15' *4.3 *9,360 3.4 7,310 *3.2 *7,090 2.5 5,620 8.9 / 29.1
5.7 m 3.0 10' *6.4 *13,820 *6.4 *13,820 *5.3 *11,520 4.6 9,890 *4.8 *10,370 3.3 7,020 *3.3 *7,310 2.3 5,130 9.2 / 30.2
18' 8"
+ 1.5 5' *8.2 *19,420 *8.2 *19,420 *8.5 *18,300 6.4 13,880 *6.4 *13,780 4.3 9,260 *5.3 *11,590 3.1 6,690 *3.5 *7,790 2.2 4,910 9.3 / 30.5
Arm
3.9 m 0 0' *6.9 *15,890 *6.9 *15,890 *10.0 *21,620 6.0 12,920 *7.2 *15,710 4.1 8,730 5.4 11,730 3.0 6,400 *3.9 *8,630 2.2 4,930 9.1 / 29.9
12' 10"
-1.5 -5' *9.1 *20,680 *9.1 *20,680 *10.7 *23,190 5.8 12,470 7.4 16,000 3.9 8,420 5.4 11,530 2.9 6,220 4.4 9,610 2.4 5,230 8.7 / 28.5

-3.0 -10' *12.8 *29,020 10.7 23,020 *10.6 *23,040 5.8 12,400 7.4 15,900 3.9 8,340 5.3 11,520 2.9 6,220 4.9 10,960 2.7 5,940 7.9 / 25.9

-4.5 -15' *14.2 *30,580 11.0 23,580 *9.7 *20,950 5.9 12,650 *7.1 *15,260 3.9 8,520 *6.0 *13,320 3.4 7,550 6.8 / 22.0

Notes: 1. Machine in Fine Mode-F (Power Boost) for lifting capacities.

2. The above loads are in compliance with SAE J1097 and ISO 10567 Hydraulic Excavator Lifting Capacity Standards.
3. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.
4. Rated loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
5. Contains metric and U.S. measurement charts.
 STANDARD EQUIPMENT
Engine Engine restart prevention circuit Superstructure Horn
Turbocharged, 4-stroke diesel High-capacity halogen lights: Access way with handrail Large storage area
engine with water cooling, direct Frame-mounted 2 Full height counterweight: Pull-up type front window
injection and charged air cooler Boom-mounted 2 LC: 4,200 kg, 9,260 lb Removable lower windshield
that meets EPA (Environment Batteries, 2 x 12 V / 150 Ah NLC: 4,800 kg, 10,580 lb Seat belt
Protection Agency) Tier 2 emission Start motor, 24 V / 4.8 kW Tool storage area Safety glass
standards Punched metal anti-slip plates Sun shield, front, roof, rear
3-stage air filter with indicator Hydraulic system Undercover (heavy-duty 4,5 mm, Windshield wiper with
and precleaner Automatic hydraulic system: 0.18") intermittent feature
Air intake heater Summation system Stereo cassette radio
Electric engine shut-off Boom priority Cab and interior Anti-vandalism kit assembly
Fuel filter and water separator Arm priority Fabric seat with heater and air preparation
Coolant filter Swing priority suspension Master ignition key
Alternator, 80 A Hydraulic piping: Pilot-operated wrist control joysticks
Hammer & shear: with 3 switches each Undercarriage
Electric/Electronic control 1 pump flow Heater & air-conditioner, automatic Hydraulic track adjusters
Quick coupler piping Hydraulic dampening cab mounts Greased and sealed track chain
system
Boom and arm regeneration valves Adjustable operator seat and Track guards
Contronics:
Swing anti-rebound valves joystick control console Undercover (4,5 mm, 0.18")
Advanced mode control system
Boom and arm holding valves Flexible antenna
Self-diagnostic system
Pump flow control for hammer & Hydraulic safety lock lever Track shoes
Machine status indication
shear Cab, all-weather sound suppressed, LC: Track shoes 800 mm, 32"
Engine speed sensing power control
Multi-stage filtering system includes: with triple grousers
Automatic idling system
Cylinder cushioning Ashtray NLC: Track shoes 500 mm, 20"
One-touch power boost
Cylinder contamination seals Cup holder with triple grousers
Safety stop/start function
Auxiliary hydraulic valve Lighter
Travel alarm
Straight travel circuit Tinted glass Digging equipment
Adjustable monitor
Automatic two-speed travel motors Door locks Boom: 5.7 m, 18' 8"
Master switch
Hydraulic oil, ISO VG 46 Floor mat Arm: 2.9 m, 9' 6"

OPTIONAL EQUIPMENT (Standard in certain markets)

Engine Hydraulic system Cab and interior Track shoes
Block heater: 120 V Hose rupture valve: boom, arm Fabric seat LC: 600/700/900 mm,
Diesel coolant heater Hydraulic piping: Control joystick with semi-long levers 24"/28"/36" track shoes
Tropical cooling kit Hammer & shear: Control joystick with 5 switches each with triple grousers
Oil bath precleaner 2 pump flow Air-conditioner, manual 700 mm, 28" track shoe with
Fuel filler pump: 50 l/min, 13.2 gpm Additional return filter Falling object guard (FOG) double grouser
with automatic shut-off Extra piping for slope & rotator Cab-mounted falling object protec- NLC: 600/700 mm,
Slope & rotator tive structures (FOPS) 24"/28" track shoes with
Electric Grapple Sunlight protection, roof (steel) triple grousers
Extra lamps: Oil leak (drain) line Rain shield, front
Cab-mounted 3 (front 2, rear 1) Volvo hydraulic quick-coupler, S1 size Safety screen for front window Digging equipment
Counterweight-mounted 1 Hydraulic oil, ISO VG 32 Lower wiper Boom: 5.7 m, 18' 8" heavy-duty
Overload warning device Hydraulic oil, ISO VG 68 Anti-vandalism kit Arm: 2.5 m, 8' 2"
Rotating warning beacon Hydraulic oil, biodegradable 32 3.9 m, 12' 10"
Hydraulic oil, biodegradable 46 Undercarriage 2.9 m, 9' 6" heavy-duty
Full track guards (only LC)
Superstructure Undercover (heavy-duty 10 mm, Service
Full height counterweight: 0.39") Hand lamp
LC: 3,700 kg, 8,160 lb Spare parts
Tool kit, full scale

All products are not available in all markets. Under our policy of continuous improvement, we reserve the right to change specifications
and designs without prior notice. The illustrations do not necessarily show the standard version of the machine.

Volvo Construction Equipment

North America, Inc.
Ref. No. 22 C 435 1641 English
One Volvo Drive, Asheville, NC 28803-3447 Printed in USA 09/04 5,0 GMC
www.volvoce.com Volvo, Asheville