Everand Logo

Welcome to Everand!

  • Discover millions of ebooks, audiobooks, and so much more with a free trial

    From $11.99/month after trial. Cancel anytime.

    Welding for Off-Road Beginners: This Book Includes - Welding for Beginners in Fabrication & Off-Road Welding
    Welding for Off-Road Beginners: This Book Includes - Welding for Beginners in Fabrication & Off-Road Welding
    Welding for Off-Road Beginners: This Book Includes - Welding for Beginners in Fabrication & Off-Road Welding
    Ebook106 pages1 hour

    Welding for Off-Road Beginners: This Book Includes - Welding for Beginners in Fabrication & Off-Road Welding

    By Roger Scates

    5/5

    ()

    Read preview

    About this ebook

    The Umtimate Welding Guide for Off-Road Beginners!

    Inside this jam-packed bundle you will get:

    Welding for Beginners in Fabrication: The Essentials of the Welding Craft


    This book offers all the essential information for a beginner. By starting in the right direction, you can become an expert welder in no time. All you need is the dedication and the desire to learn. 

    You will learn everything about:

    • Workplace safety
    • Welding equipment
    • Various welding techniques


    Every craft takes time to master but we can reduce the learning curve by taking the right approach. Even if you are completely new to welding you can find everything you need in this book to build a solid baseline.
     

    Off-Road Welding: Advanced Techniques on How to Become a True Off-Road Welder


    This book does not only contain information about off-road welding but also has clear and solid instructions on how to design and prepare the most important parts of an off-road vehicle. By approaching this subject from all angles, you will expand your knowledge and be on the fastest way to become a welding professional. 

    Here are a few points that you will learn in the second part:

    • How to properly cut, bend and weld steel tubes
    • How to weld exhaust tubing
    • How to design and build a roll cage


    Such a complex craft takes a lot of time and practice to master. However, by learning the right steps you will be able to follow your passion sooner than you think!
     

    Download this bundle today start your journey into the off-road world!

    LanguageEnglish
    PublisherC-S Publication
    Release dateDec 10, 2018
    ISBN9781386201397

    Read more from Roger Scates

    Related to Welding for Off-Road Beginners

    Related ebooks

    Technology & Engineering For You

    View More
    View More

    Related podcast episodes

    Related articles

    • UNLIMITED

      Welding Part 1 Weld Done!

      Sep 16, 2019

      Welding Part 1 Weld Done!
      8 min read

    • UNLIMITED

      Structural Repairs

      Aug 5, 2022

      Structural Repairs
      5 min read

    • UNLIMITED

      Basics Of MIG Welding

      Aug 9, 2019

      Basics Of MIG Welding
      10 min read

    • UNLIMITED

      Metal Folders

      Feb 5, 2020

      Metal Folders
      3 min read

    • UNLIMITED

      Basic Welding Technique

      May 4, 2020

      Basic Welding Technique
      10 min read

    • UNLIMITED

      Basics Of Welding Aluminium

      Nov 29, 2019

      Basics Of Welding Aluminium
      10 min read

    • UNLIMITED

      Basic Rust Repair

      Nov 12, 2018

      Words and photography: Arvid Svendsen Syndication: Fox Living in the Chicago area means rust is a fact of life. From my perspective, metal repair is on the level of buying tyres. It’s necessary maintenance. My beloved ’66 Coronet 500, for instance,

      5 min read

    • UNLIMITED

      Basics Of ARC Welding

      Jun 14, 2019

      Basics Of ARC Welding
      10 min read

    • UNLIMITED

      Laying Dimes

      Nov 15, 2019

      Laying Dimes
      6 min read

    • UNLIMITED

      Discreet Welding

      Feb 3, 2021

      Discreet Welding
      2 min read

    • UNLIMITED

      Learning To TIG Weld

      Sep 23, 2019

      WHEN YOU SEE A BEAUTIFUL aluminium tank on a trials bike, an oil tank that’s been made for a special that fits perfectly, or a repair to an unobtainable crankcase, many fill with envy of the skilled person behind them. I’ve been MIG welding cars, bik

      5 min read

    • UNLIMITED

      Workshops and Sanctuaries

      Oct 29, 2020

      Workshops and Sanctuaries
      15 min read

    • UNLIMITED

      Brain Boxes

      Dec 6, 2019

      Brain Boxes
      10 min read

    • UNLIMITED

      Dry Sumps

      Oct 7, 2019

      Dry Sumps
      4 min read

    • UNLIMITED

      Beyond The Toolbox

      Jun 27, 2022

      Beyond The Toolbox
      6 min read

    • UNLIMITED

      Welding Won’t Make You Rich

      Sep 13, 2019

      Welding Won’t Make You Rich
      9 min read

    • UNLIMITED

      Melting Metal

      Nov 19, 2021

      Mig has become the de-facto car welding choice for beginners, enthusiasts, and professionals alike. Overall, this is good news: it’s a fast easily learned process, decent machines are affordable, and Mig welding causes minimal panel distortion. But i

      4 min read

    • UNLIMITED

      Mastering The Lathe 6

      Aug 6, 2021

      Mastering The Lathe 6
      8 min read

    • UNLIMITED

      Hammer Time!

      Jun 19, 2019

      Hammer Time!
      3 min read

    • UNLIMITED

      How to TIG Weld

      Jun 23, 2022

      How to TIG Weld
      2 min read

    • UNLIMITED

      Shrinkage

      Sep 11, 2019

      Shrinkage
      3 min read

    • UNLIMITED

      Tuning The Yb Engine

      Oct 2, 2020

      Tuning The Yb Engine
      8 min read

    Related categories

    Reviews for Welding for Off-Road Beginners

    5/5

    2 ratings0 reviews

    What did you think?

    Tap to rate

    Review must be at least 10 words

      Book preview

      Welding for Off-Road Beginners - Roger Scates

      Welding for Off-Road Beginners

      This Book Includes:

      Welding for Beginners in Fabrication

      &

      Off-Road Welding

      Welding for Beginners in Fabrication

      The Essentials of the Welding Craft

      by Roger Scates

      Text Copyright © 2018 Roger Scates

      All rights reserved. No part of this guide may be reproduced in any form without permission in writing from the publisher except in the case of brief quotations embodied in critical articles or reviews.

      Legal & Disclaimer

      The information contained in this book and its contents are not designed to replace or take the place of any form of medical or professional advice. The information provided by this book is not meant to replace the need for independent medical, financial, legal or other professional advice or services, as may be required. The content and information in this book have been provided for entertainment purposes only.

      The content and information contained in this book have been compiled from sources deemed reliable and are accurate to the best of the Author's knowledge and belief. The Author cannot, however, guarantee its accuracy and validity and cannot be held liable for any errors and/or omissions. When needed, further changes will be periodically made to this book. Where appropriate and/or necessary, you are obligated to consult a professional (including but not limited to your doctor, attorney, financial advisor or such other professional advisor) before using any of the suggested remedies, techniques, or information in this book.

      Upon using the contents and information contained in this book, you agree to hold the Author harmless from and against any damages, costs, and expenses, including any legal fees potentially resulting from the application of any of the information provided by this book. This disclaimer applies to any loss, damages or injury caused by the use and application, whether directly or indirectly, of any advice or information presented, whether for breach of contract, tort, negligence, personal injury, criminal intent, or under any other cause of action.

      You agree to accept all risks of using the information presented in this book.

      You agree that by continuing to read this book, where appropriate and/or necessary that you shall consult a professional (including but not limited to your doctor, attorney, or financial advisor or such other advisor as needed) before using any of the suggested methods, techniques or information in this book.

      Contents

      I. Introduction

      II. Getting Started

      Workplace Safety

      General Health and Safety in Welding

      Fire and Explosion Prevention

      Fume and Gas Control

      Electrical Safety

      Safe Use of Welding Gases

      Equipment

      Welders

      Electrodes

      Clamps

      Angle Grinder

      Other Equipment

      Safety Gear

      Helmet

      Gloves

      Grounding Clamps

      Clothing

      Other Safety Products

      III. Welding Techniques

      Stick Welding (SMAW)

      MIG Welding (GMAW)

      TIG Welding (GTAW)

      IV. Down to the Wire

      V. Going Off-Road

      VI. Conclusion

      I. 

      Introduction

      Everyone is familiar with the concept of welding, and quite a few people have picked up the skill as a hobby. Basically, welding is the process of joining two pieces of metal using heat. The joint of a weld that is well done looks clean and is hard to detect. Welding can be intimidating to some people since you need to work with extreme heat. An accident can be even fatal. That is why you need the right gear in addition to some safety practices if you want to try it out. When you get used to it, the welding process can even be fun.

      Welding is a common industrial process, often seen in construction, but it also has some applications in your home as well. With this skill, you can make some quick repairs by yourself, thus saving time and money.

      When trying to master a new craft, having the right foundation can drastically reduce the learning curve. This book offers exactly that, a solid foundation on which you can build your welding mastery. The art of welding takes a lot of time and practice, that is why a book cannot contain all the information that will magically turn you into an expert welder. Nothing beats the experience of a true master. However, this book tries to help you start on the right path and give you the right basics that can turn a beginner into an expert. The welding craft is explained as a whole which allows you to see the big picture. With patience, practice and dedicated effort, you too can become a master welder.

      II. 

      Getting Started

      If you are picking welding up as a profession, then you will need a couple welder certifications and licenses. Basically, you need to follow certain procedures which help determine if you have the skills and abilities to produce an acceptable weld. Most of the time, the test is conducted according to a code. There are many organizations out there that offer such a test. Most of the certifications have an expiration date, but you can always renew or extend your certifications under different requirements.

      Before you get started with welding, you need to make some preparations. You need to have certain gear and tools. Welding can be dangerous and can cause severe damage if you are not careful. This chapter will address both the equipment you need, how to maintain it for extended use, as well as certain safety procedures.

      Workplace Safety

      In order to have a safe working experience, you need to make sure that your workplace is free from any possible hazards. Dangers of fires and explosions are always present when you are welding. Welding spatter and fires from hot metal can cause severe burns without proper protective equipment. The fumes coming from the welding can be toxic. You are also prone to fatal electric shocks. There are also other work hazards you need to be aware of such as the dust, which may accumulate to a dangerous level, noise, vibration and radiation, are some of the most common. Here are some safety procedures you should definitely follow:

      General Health and Safety in Welding

      Before you start welding, make sure that your workplace is free from any combustible materials. If possible, remove everything that you do not need from your workplace. If you plan to weld in your garage, make sure that no flammable or combustible materials are in the area. You can never tell when a wild spark might fly off and set things alight. If you smell gas, do not light any gas torches or use electric welding equipment. Still, do not rely on your sense of smell entirely. When you have your equipment on, it can be difficult to smell gas.

      When you are welding, make sure that your eyes are protected and your skin is covered from the arc flash (we will talk about safety equipment later on). Assume that everything is hot just like how you would assume that every gun is loaded. Keep your gloves on whenever you work and never touch the

      Enjoying the preview?
      Page 1 of 1