Everand Logo

Welcome to Everand!

  • UNLIMITED

    Street Machine

    HAMMER TIME!

    Jun 19, 2019 3 minutes
    STORY & PHOTOS CHAD ATKINSON

    THE most primitive aspect of metal-shaping would have to be the hammer-and-dolly work. Here is a guide on how to use a hammer and dolly to knock a panel into shape and then fine-tune it.

    STEP 01

    Just about any solid object can be utilised as a dolly, which is, in basic terms, a hand-held anvil. The key is to use an object whose contour matches the back side of the panel

    You’re reading a preview, subscribe to read more.

    More from Street Machine

    Street Machine2 min read
    427ci Supercharged Ls
    THEY might be best known for building big-inch combos that tower above bonnet lines, but the team at Sydney’s ProFlo Performance will happily work to extract maximum power from a given engine no matter what it looks like. This 7.0-litre LS is a case
    Street Machine6 min read
    In The Build
    GOT a sweet ride that’s currently in the build and want to share it with our readers? Email photos of it (2MB+ each) along with some details on the build to [email protected]. XM FALCON SEDAN DELIVERY “MY FATHER-in-law bought this XM se
    Street Machine4 min read
    Takin’ It To The Street
    ROSS Fortuna’s EH Premier is a truly special car in the here and now, but its long and storied history only increases its appeal. You see, this Prem has been a tough pro street car for over three decades. When it first hit the scene in the late 1980s

    Related Books & Audiobooks