18csl58 Dbms Lab Manual 2022-23

RNS INSTITUTE OF TECHNOLOGY
Dr. Vishnuvardhan Road, Channasandra, Bengaluru - 560 098
Department of Information Science and Engineering
DBMS LABORATORY WITH MINI PROJECT MANUAL

V Semester
18CSL58
Faculty-in-charge
Dr. R Rajkumar
Associate Professor
Dr. Vishnuvardhan Road, Channasandra, Bengaluru -560 098
VISION of the College

Building RNSIT into a World - Class Institution
MISSION of the College
To impart high quality education in Engineering, Technology and Management with a

difference, enabling students to excel in their career by
1. Attracting quality Students and preparing them with a strong foundation in fundamentals
so as to achieve distinctions in various walks of life leading to outstanding contributions.
2. Imparting value based, need based, and choice based, and skill based professional
education to the aspiring youth and carving them into disciplined, World class
Professionals with social responsibility.
3. Promoting excellence in Teaching, Research and Consultancy that galvanizes academic
consciousness among Faculty and Students.
4. Exposing Students to emerging frontiers of knowledge in various domains and make them
suitable for Industry, Entrepreneurship, Higher studies, and Research & Development.
5. Providing freedom of action and choice for all the Stake holders with better visibility.
VISION of the Department

Fostering winning professionals of Strong Informative Potentials
MISSION of the Department

Imparting high quality education in the area of Information Science so as to graduate the
students with good fundamentals, "Information System Integration", "Software
Creation" capability & suitably train them to thrive in Industries, higher schools of
learning and R & D centers with a comprehensive perspective.
Page 2
PROGRAM EDUCATIONAL OBJECTIVES (PEOs)
ISE Graduates within three-four years of graduation will have

• PEO1: Acquired the fundamentals of computers and applied knowledge of
Information Science & Engineering and continue to develop their technical
competencies by problem solving using programming.
• PEO2: Ability to formulate problems attained the Proficiency to develop
system/application software in a scalable and robust manner with various platforms,
tools and frameworks to provide cost effective solutions.
• PEO3: Obtained the capacity to investigate the necessities of the software Product,
adapt to technological advancement, promote collaboration and interdisciplinary
activities, Protecting Environment and developing Comprehensive leadership.
• PEO4: Enabled to be employed and provide innovative solutions to real-world
problems across different domains.
• PEO5: Possessed communication skills, ability to work in teams, professional ethics,
social responsibility, entrepreneur and management, to achieve higher career goals,
and pursue higher studies.
PROGRAM OUTCOMES (POs)
Engineering Graduates will be able to:
• PO1: Engineering knowledge: Apply the knowledge of mathematics, science,

engineering fundamentals, and an engineering specialization for the solution of
complex engineering problems
• PO2: Problem analysis: Identify, formulate, research literature, and analyze
complex engineering problems reaching substantiated conclusions using first
principles of mathematics, natural sciences and engineering sciences.
• PO3: Design/development of solutions: Design solutions for complex engineering
problems and design system components or processes that meet the specified needs
with appropriate consideration for public health and safety, and cultural, societal, and
environmental considerations.
• PO4: Conduct investigations of complex problems: Use research-based
knowledge and research methods including design of experiments, analysis and
interpretation of data, and synthesis of the information to provide valid conclusions.
• PO5: Modern tool usage: Create, select, and apply appropriate techniques,
resources, and modern engineering and IT tools, including prediction and modeling
to complex engineering activities, with an understanding of the limitations.
• PO6: The engineer and society: Apply reasoning informed by the contextual
knowledge to assess Societal, health, safety, legal and cultural issues and the
consequent responsibilities relevant to the professional engineering practice.
Page 3
• PO7: Environment and sustainability: Understand the impact of the professional
engineering solutions in societal and environmental contexts, and demonstrate the
knowledge of, and need for sustainable development.
• PO8: Ethics: Apply ethical principles and commit to professional ethics and
responsibilities and norms of the engineering practice.
• PO9: Individual and teamwork: Function effectively as an individual, and as a
member or leader in diverse teams, and in multidisciplinary settings.
• PO10: Communication: Communicate effectively on complex engineering
activities with the engineering community and with the society at large, such as,
being able to comprehend and write effective reports and design documentation,
make effective presentations, and give and receive clear instructions.
• PO11: Project management and finance: Demonstrate knowledge and
understanding of the engineering and management principles and apply these to
one’s own work, as a member and leader in a team, to manage projects and in
multidisciplinary environments.
• PO12: Life-long learning: Recognize the need for and have the preparation and
ability to engage in independent and life-long learning in the broadest context of
technological change.
PROGRAM SPECIFIC OUTCOMES (PSOs)
ISE Graduates will have

• PSO1 – Problem Solving Abilities: Ability to demonstrate the fundamental and
theoretical concepts, analyze the real time problems and develop customized software
solutions by applying the knowledge of mathematics and algorithmic techniques.
• PSO2 – Applied Engineering Skills: Enable creative thinking, Ability to apply standard
practices and strategies, technical skills in software design, development, integration of
systems and management for improving the security, reliability and survivability of the
infrastructure.
• PSO3 – General Expertise and Higher Learning: Ability to exchange knowledge

effectively demonstrate the ability of teamwork, documentation skills, professional ethics,
entrepreneurial skills and continuing higher education in the field of Information
technology.
Page 4
Dr. VISHNUVARDHAN ROAD, CHANNASANDRA, BENGALURU -560 098

DBMS Laboratory with Mini project
Subject Code: 18CSL58 I.A. Marks : 40
Hours/Week : 01L+2P Exam Hours: 03
Total Hours : 40 Exam Marks: 60
Course objectives
This course will enable students to
• Foundation knowledge in database concepts, technology and practice to groom
students into well-informed database application developers.
• Strong practice in SQL programming through a variety of database problems.
• Develop database applications using front-end tools and back-end DBMS.
Course Outcomes
After studying this course, students will be able to:
Design ER diagram, relational schema and develop database for a given problem and perform operations using
CO1 simple SQL queries.
CO2 Create ER diagram, relational schema and develop database for a given problem using SET and DELETE operation.
Design ER diagram, relational schema and develop database for a given problem using JOIN operation and eliminate
CO3 redundancies.
CO4 Create ER diagram, relational schema and develop database for a given problem using nested and co-related queries
CO5 Design and develop a mini-project for real world application using suitable DBMS.
Apply the knowledge of Java/ PHP / C# / Python / any other front end tool to build a GUI to store, retrieve and
CO6 manipulate data.
CO mapping to PO/PSOs
CO /
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2 PSO3
PO & PSO
18CSL58.1 3 3 3 3 2 3 1
18CSL58.2 3 3 3 2 3 2 3 2
18CSL58.3 3 3 3 2 3 2 3 2
18CSL58.4 3 3 3 3 2 2
18CSL58.5 3 3 3 2 1 2 3 3 3 3 2
18CSL58.6 3 3 3 2 1 2 3 3 3 3 3 2
Page 5
List of Programs
Sl.
Experiment CO
No
1 Part A: SQL Programming CO1
Consider the following schema for a Library Database: CO2
BOOK (Book_id, Title, Publisher_Name, Pub_Year)
BOOK_AUTHORS (Book_id, Author_Name)
PUBLISHER (Name, Address, Phone)
BOOK_COPIES (Book_id, Branch_id, No-of_Copies)
BOOK_LENDING (Book_id, Branch_id, Card_No, Date_Out,
Due_Date)
LIBRARY_BRANCH (Branch_id, Branch_Name, Address)
Write SQL queries to
1. Retrieve details of all books in the library – id, title, name of
publisher, authors, number of copies in each branch, etc.
2. Get the particulars of borrowers who have borrowed more than 3
books, but from Jan 2017 to Jun 2017.
3. Delete a book in BOOK table. Update the contents of other tables to
reflect this data manipulation operation.
4. Partition the BOOK table based on year of publication. Demonstrate
its working with a simple query.
5. Create a view of all books and its number of copies that are
currently available in the Library.
2 Consider the following schema for Order Database: CO1
SALESMAN (Salesman_id, Name, City, Commission) CO2
CUSTOMER (Customer_id, Cust_Name, City, Grade, Salesman_id)
ORDERS (Ord_No, Purchase_Amt, Ord_Date, Customer_id,
Salesman_id)
1. Count the customers with grades above Bangalore’s average.
2. Find the name and numbers of all salesman who had more than one
customer.
3. List all the salesman and indicate those who have and don’t have
customers in their cities (Use UNION operation.)
4. Create a view that finds the salesman who has the customer with the
highest order of a day.
5. Demonstrate the DELETE operation by removing salesman with id
1000. All his orders must also be deleted.
3 Consider the schema for Movie Database: CO1
ACTOR (Act_id, Act_Name, Act_Gender) CO2
DIRECTOR (Dir_id, Dir_Name, Dir_Phone)
MOVIES (Mov_id, Mov_Title, Mov_Year, Mov_Lang, Dir_id)
MOVIE_CAST (Act_id, Mov_id, Role)
RATING (Mov_id, Rev_Stars)
1. List the titles of all movies directed by ‘Hitchcock’.
2. Find the movie names where one or more actors acted in two or
more movies.
3. List all actors who acted in a movie before 2000 and also in a
Page 6
movie after 2015 (use JOIN operation).
4. Find the title of movies and number of stars for each movie that has
at least one rating and find the highest number of stars that movie
received. Sort the result by movie title.
5. Update rating of all movies directed by ‘Steven Spielberg’ to 5
4 Consider the schema for College Database: CO3
STUDENT (USN, SName, Address, Phone, Gender) CO4
SEMSEC (SSID, Sem, Sec)
CLASS (USN, SSID)
SUBJECT (Subcode, Title, Sem, Credits)
IAMARKS (USN, Subcode, SSID, Test1, Test2, Test3, FinalIA)
1. List all the student details studying in fourth semester ‘C’ section.
2. Compute the total number of male and female students in each
semester and in each section.
3. Create a view of Test1 marks of student USN ‘1BI15CS101’ in all
subjects.
4. Calculate the FinalIA (average of best two test marks) and update
the corresponding table for all students.
5. Categorize students based on the following criterion: If FinalIA =
17 to 20 then CAT = ‘Outstanding’ If FinalIA = 12 to 16 then CAT
= ‘Average’ If FinalIA< 12 then CAT = ‘Weak’. Give these details
only for 8th semester A, B, and C section students.
5 Consider the schema for Company Database: CO3
EMPLOYEE (SSN, Name, Address, Sex, Salary, SuperSSN, DNo) CO4
DEPARTMENT (DNo, DName, MgrSSN, MgrStartDate)
DLOCATION (DNo, DLoc)
PROJECT (PNo, PName, PLocation, DNo)
WORKS_ON (SSN, PNo, Hours)
1. Make a list of all project numbers for projects that involve an
employee whose last name is ‘Scott’, either as a worker or a s a
manager of the department that controls the project.
2. Show the resulting salaries if every employee working on the ‘IoT’
project is given a 10 percent raise.
3. Find the sum of the salaries of all employees of the ‘Accounts’
department, as well as the maximum salary, the minimum salary,
and the average salary in this department.
4. Retrieve the name of each employee who works on all the projects
controlled by department number 5 (use NOT EXISTS operator).
5. For each department that has more than five employees, retrieve the
department number and the number of its employees who are
making more than Rs. 6,00,000.
CO5
7 Part A: SQL Programming-Mini-Project CO6
Page 7
Subject Code: 18CSL58 I.A. Marks : 40
Hours/Week : 01L+2P Exam Hours: 03
Total Hours : 40 Exam Marks: 60
Regular Lab Assessment based on Write-up and Execution Rubrics (Max: 15 marks)
Above Average Average Below Average
Understanding of Able to analyze the given Able to analyze the

Poor understanding of
problem and problem and efficiently problem and moderate
a. high-level language
approach to solve implement using suitable understanding of high-
instructions or No
(4 Marks) high-level language level language
program write-up. (2-1)
instructions. (4-3) instructions. (3-2)
Program executed for
Execution and Program is executed for Program has compilation
varied inputs with valid
b. Viva Voce some inputs and able to errors or no Execution
results and able to
(7 Marks) answer three-two and not answered any
answer all five questions
questions. (5-3) questions. (2-1)
appropriately. (7-5)
Results and Program and results

Program and results
c. Documentation obtained are legibly No Proper results and
obtained is acceptably
(4 Marks) written / documented. poor documentation. (2-1)
documented. (3-2)
(4-3)
Lab Internal Assessment Test Rubrics (Max: 10 marks)

Write-up Able to write the complete Able to write the code
a. Unable to write. (1-0)
(3 Marks) code. (3) with few errors. (2-1)
Program has compilation
Execution Executed successfully for Obtained partially
b. errors or No Execution.
(4 Marks) all the inputs given. (4-3) correct results. (3-2)
(2-1)
Viva Voce Able to answer all Able to answer 1 - 2
c. Not answered any. (1-0)
(3 Marks) questions correctly. (3-2) questions. (2-1)
Mini-Project Assessment Rubrics (Max: 15 marks)

Able to develop a mini- Able to develop a mini-
Demonstration / Not able to develop mini-
project completely and project partially and given
a. Presentation project or absent for the
given presentation along presentation along with
(5 Marks) presentation. (2-0)
with the team members. the team members. (3-2)
(5 - 4)
Proper document according Able to document project Format is not as per the
to format specified by phases impartially and not specified / standard
b. Report
documenting all the phases following the standard template or not able to
(5 Marks)
of project. (5-4) format (3-2) draft the Report (1 - 0)
Able to answer all Able to answer 2 - 3 Answered partially or Not

c Viva Voce
questions correctly. (5) questions. (3 - 2) answered any. (2 -0)
(5 Marks)
Page 8
Lesson Planning for Laboratory Experiments
Week
Schedule / Plan
No.
1 Introduction to
2 Program 1: Design of ER Diagram and Schema Diagram. Create, Insert, Queries
4 Mini Project - Design of ER and Schema Diagram Presentation
5 Lab Test I: Program 1 and 2
9 Mini Project Backend creation in Oracle / MySQL / MS SQL Server / any other RDBMS
Mini Project Frontend implementation using appropriate language to design GUI / Web –
10
Based application
11 Mini Project Integration and Testing / Verification & Validation
Mini Project Report writing exercise and final demonstration / presentation and
12
submission
13 Lab Test II: All 5 programs
Page 9
18CSL58:DBMS Lab Manual 2022-23
INTRODUCTION TO SQL
Pronounced as SEQUEL: Structured English QUERY Language

 Pure non-procedural query language
 Designed and developed by IBM, Implemented by Oracle
 1978 System/R IBM- 1st Relational DBMS
 1979 Oracle and Ingres
 1982 SQL/DS and DB2 IBM
 Accepted by both ANSI + ISO as Standard Query Language for any RDBMS
 SQL86 (SQL1) : first by ANSI and ratified by ISO (SQL-87), minor revision on 89
(SQL-89)
 SQL92 (SQL2) : major revision
 SQL99 (SQL3) : add recursive query, trigger, some OO features, and non-scholar type
 SQL2003 : XML, Window functions, and sequences (Not free)
 Supports all the three sublanguages of DBMS: DDL, DML, DCL
 Supports Aggregate functions, String Manipulation functions, Set theory operations,
Date Manipulation functions, rich set of operators ( IN, BETWEEN, LIKE, IS NULL,
EXISTS)
 Supports REPORT writing features and Forms for designing GUI based applications
DATA DEFINITION, CONSTRAINTS, AND SCHEMA CHANGES

Used to CREATE, ALTER, and DROP the descriptions of the database tables (relations)
Data Definition in SQL
CREATE, ALTER and DROP
table…………………………………….……relation
row……………………………………..…….tuple
column………………………………….……attribute
DATA TYPES
 Numeric: NUMBER, NUMBER(s,p), INTEGER, INT, FLOAT, DECIMAL
 Character: CHAR(n), VARCHAR(n), VARCHAR2(n), CHAR VARYING(n)
 Bit String: BLOB, CLOB
 Boolean: true, false, and null
RNSIT, Bangalore Page 1

 Date and Time: DATE (YYYY-MM-DD) TIME( HH:MM:SS)

 Timestamp: DATE + TIME
 USER Defined types
CREATE SCHEMA
Specifies a new database schema by giving it a name
Ex: CREATE SCHEMA COMPANY AUTHORIZATION Jsmith;
CREATE TABLE
 Specifies a new base relation by giving it a name, and specifying each of its attributes and
their data types
Syntax of CREATE Command:
CREATE TABLE <table name> ( <Attribute A1> <Data Type D1> [< Constarints>],
<Attribute A2> <Data Type D2> [< Constarints>],
…….
<Attribute An> <Data Type Dn> [< Constarints>],
[<integrity-constraint1>, <integrity-constraint k> ] );
- A constraint NOT NULL may be specified on an attribute
A constraint NOT NULL may be specified on an attribute
Ex: CREATE TABLE DEPARTMENT (
DNAME VARCHAR(10) NOT NULL,
DNUMBER INTEGER NOT NULL,
MGRSSN CHAR(9), MGRSTARTDATE CHAR(9) );
 Specifying the unique, primary key attributes, secondary keys, and referential integrity
constraints (foreign keys).
Ex: CREATE TABLE DEPT (
MGRSSN CHAR(9),
MGRSTARTDATE CHAR(9),
PRIMARY KEY (DNUMBER),
UNIQUE (DNAME),

FOREIGN KEY (MGRSSN) REFERENCES EMP(SSN));

 We can specify RESTRICT, CASCADE, SET NULL or SET DEFAULT on referential
integrity constraints (foreign keys)
Ex: CREATE TABLE DEPT (
MGRSSN CHAR(9), MGRSTARTDATE CHAR(9),
PRIMARY KEY (DNUMBER),
UNIQUE (DNAME),
FOREIGN KEY (MGRSSN) REFERENCES EMP
ON DELETE SET DEFAULT ON UPDATE CASCADE);
DROP TABLE
 Used to remove a relation (base table) and its definition.
 The relation can no longer be used in queries, updates, or any other commands since its
description no longer exists
Example: DROP TABLE DEPENDENT;
ALTER TABLE:
 Used to add an attribute to/from one of the base relations drop constraint -- The new
attribute will have NULLs in all the tuples of the relation right after the command is
executed; hence, the NOT NULL constraint is not allowed for such an attribute.
Example: ALTER TABLE EMPLOYEE ADD JOB VARCHAR2 (12);
 The database users must still enter a value for the new attribute JOB for each
EMPLOYEE tuple. This can be done using the UPDATE command.
DROP A COLUMN (AN ATTRIBUTE)
 ALTER TABLE COMPANY.EMPLOYEE DROP ADDRESS CASCADE; All

constraints and views that reference the column are dropped automatically, along with the
column. ALTER TABLE COMPANY.EMPLOYEE DROP ADDRESS RESTRICT;
Successful if no views or constraints reference the column. ALTER TABLE
COMPANY.DEPARTMENT ALTER MGRSSN DROP DEFAULT;

 ALTER TABLE COMPANY.DEPARTMENT ALTER MGRSSN SET DEFAULT

“333445555”;
BASIC QUERIES IN SQL

 SQL has one basic statement for retrieving information from a database; the SLELECT
statement
 This is not the same as the SELECT operation of the relational algebra
 Important distinction between SQL and the formal relational model;
 SQL allows a table (relation) to have two or more tuples that are identical in all their
attribute values
 Hence, an SQL relation (table) is a multi-set (sometimes called a bag) of tuples; it is not a
set of tuples
 SQL relations can be constrained to be sets by using the CREATE UNIQUE INDEX
command, or by using the DISTINCT option
 Basic form of the SQL SELECT statement is called a mapping of a SELECT-FROM-
WHERE block
SELECT <attribute list> FROM <table list> WHERE <condition>
 <attribute list> is a list of attribute names whose values are to be retrieved by the query
 <table list > is a list of the relation names required to process the query
 <condition> is a conditional (Boolean) expression that identifies the tuples to be retrieved
by the query
SIMPLE SQL QUERIES

Basic SQL queries correspond to using the following operations of the relational algebra:
SELECT
PROJECT
JOIN
All subsequent examples uses COMPANY database as shown below:
Example of a simple query on one relation
Query 0: Retrieve the birth date and address of the employee whose name is 'John B.
Smith'.
Q0: SELECT BDATE, ADDRESS FROM EMPLOYEE

WHERE FNAME='John' AND MINIT='B’ AND LNAME='Smith’

Similar to a SELECT-PROJECT pair of relational algebra operations: The SELECT-
clause specifies the projection attributes and the WHERE-clause specifies the selection condition
However, the result of the query may contain duplicate tuples

Example of a simple query on two relations

Query 1: Retrieve the name and address of all employees who work for the 'Research'
department.
Q1: SELECT FNAME, LNAME, ADDRESS FROM EMPLOYEE, DEPARTMENT
WHERE DNAME='Research' AND DNUMBER=DNO
Similar to a SELECT-PROJECT-JOIN sequence of relational algebra operations
(DNAME='Research') is a selection condition (corresponds to a SELECT operation in relational
algebra) (DNUMBER=DNO) is a join condition (corresponds to a JOIN operation in relational
algebra)
Example of a simple query on three relations
Query 2: For every project located in 'Stafford', list the project number, the controlling
department number, and the department manager's last name, address, and birth date.
Q2: SELECT PNUMBER, DNUM, LNAME, BDATE, ADDRESS FROM PROJECT,
DEPARTMENT, EMPLOYEE WHERE DNUM=DNUMBER AND MGRSSN=SSN
AND PLOCATION='Stafford'
In Q2, there are two join conditions The join condition DNUM=DNUMBER relates a project to
its controlling department The join condition MGRSSN=SSN relates the controlling department
to the employee who manages that department
ALIASES, * AND DISTINCT, EMPTY WHERE-CLAUSE

 In SQL, we can use the same name for two (or more) attributes as long as the attributes
are in different relations
 A query that refers to two or more attributes with the same name must qualify the
attribute name with the relation name by prefixing the relation name to the attribute name
Example: EMPLOYEE.LNAME, DEPARTMENT.DNAME
 Some queries need to refer to the same relation twice. In this case, aliases are given to the
relation name
Example
Query 3: For each employee, retrieve the employee's name, and the name of his or her
immediate supervisor.

Q3: SELECT E.FNAME, E.LNAME, S.FNAME, S.LNAME FROM EMPLOYEE E S

WHERE E.SUPERSSN=S.SSN
In Q3, the alternate relation names E and S are called aliases or tuple variables for the
EMPLOYEE relation We can think of E and S as two different copies of EMPLOYEE; E
represents employees in role of supervisees and S represents employees in role of supervisors
Aliasing can also be used in any SQL query for convenience. Can also use the AS
keyword to specify aliases
Q3: SELECT E.FNAME, E.LNAME, S.FNAME, S.LNAME FROM EMPLOYEE AS

E, EMPLOYEE AS S WHERE E.SUPERSSN=S.SSN
UNSPECIFIED WHERE-clause
A missing WHERE-clause indicates no condition; hence, all tuples of the relations in the
FROM-clause are selected. This is equivalent to the condition WHERE TRUE
Example:
Query 4: Retrieve the SSN values for all employees.
Q4: SELECT SSN FROM EMPLOYEE
If more than one relation is specified in the FROM-clause and there is no join condition, then the
CARTESIAN PRODUCT of tuples is selected
Example:
Q5: SELECT SSN, DNAME FROM EMPLOYEE, DEPARTMENT
Note: It is extremely important not to overlook specifying any selection and join conditions in
the WHERE-clause; otherwise, incorrect and very large relations may result
USE OF *
To retrieve all the attribute values of the selected tuples, a * is used, which stands for all the
attributes
Examples:
Retrieve all the attribute values of EMPLOYEES who work in department 5.
Q1a: SELECT * FROM EMPLOYEE WHERE DNO=5
Retrieve all the attributes of an employee and attributes of DEPARTMENT he works in for
every employee of ‘Research’ department.

Q1b: SELECT * FROM EMPLOYEE, DEPARTMENT WHERE DNAME='Research'

AND DNO=DNUMBER
USE OF DISTINCT
SQL does not treat a relation as a set; duplicate tuples can appear. To eliminate duplicate
tuples in a query result, the keyword DISTINCT is used
Example: the result of Q1c may have duplicate SALARY values whereas Q1d does not have
any duplicate values
Q1c: SELECT SALARY FROM EMPLOYEE Q1d: SELECT DISTINCT

SALARY FROM EMPLOYEE
SET OPERATIONS
SQL has directly incorporated some set operations such as union operation (UNION), set
difference (MINUS) and intersection (INTERSECT) operations. The resulting relations of these
set operations are sets of tuples; duplicate tuples are eliminated from the result. The set
operations apply only to union compatible relations; the two relations must have the same
attributes and the attributes must appear in the same order
Query 5: Make a list of all project numbers for projects that involve an employee whose
last name is 'Smith' as a worker or as a manager of the department that controls the
project.
Q5: (SELECT PNAME FROM PROJECT, DEPARTMENT, EMPLOYEE WHERE
DNUM=DNUMBER AND MGRSSN=SSN AND LNAME='Smith')
UNION
(SELECT PNAME FROM PROJECT, WORKS_ON, EMPLOYEE WHERE

PNUMBER=PNO AND ESSN=SSN AND NAME='Smith')
NESTING OF QUERIES
A complete SELECT query, called a nested query, can be specified within the WHERE-
clause of another query, called the outer query. Many of the previous queries can be specified in
an alternative form using nesting
Query 6: Retrieve the name and address of all employees who work for the 'Research'
department.

Q6: SELECT FNAME, LNAME, ADDRESS FROM EMPLOYEE WHERE DNO IN

(SELECT DNUMBER FROM DEPARTMENT WHERE DNAME='Research' )
Note: The nested query selects the number of the 'Research' department. The outer query selects
an EMPLOYEE tuple if its DNO value is in the result of either nested query. The comparison
operator IN compares a value v with a set (or multi-set) of values V, and evaluates to TRUE if v
is one of the elements in V
In general, we can have several levels of nested queries. A reference to an unqualified

attribute refers to the relation declared in the innermost nested query. In this example, the nested
query is not correlated with the outer query
CORRELATED NESTED QUERIES

If a condition in the WHERE-clause of a nested query references an attribute of a relation
declared in the outer query, the two queries are said to be correlated. The result of a correlated
nested query is different for each tuple (or combination of tuples) of the relation(s) the outer
query
Query 7: Retrieve the name of each employee who has a dependent with the same first
name as the employee.
Q7: SELECT E.FNAME, E.LNAME FROM EMPLOYEE AS E WHERE E.SSN IN
(SELECT ESSN FROM DEPENDENT WHERE ESSN=E.SSN AND
E.FNAME=DEPENDENT_NAME)
In Q7, the nested query has a different result in the outer query. A query written with nested
SELECT... FROM… WHERE... blocks and using the = or IN comparison operators can always
be expressed as a single block query. For example, Q7 may be written as in Q7a
Q7a: SELECT E.FNAME, E.LNAME FROM EMPLOYEE E, DEPENDENT D

WHERE E.SSN=D.ESSN AND E.FNAME=D.DEPENDENT_NAME
THE EXISTS FUNCTION

EXISTS is used to check whether the result of a correlated nested query is empty
(contains no tuples) or not. We can formulate Query 7 in an alternative form that uses EXIST.
Q7b: SELECT FNAME, LNAME FROM EMPLOYEE
WHERE EXISTS (SELECT * FROM DEPENDENT WHERE SSN=ESSN
AND FNAME=DEPENDENT_NAME)

Query 8: Retrieve the names of employees who have no dependents.

Q8: SELECT FNAME, LNAME FROM EMPLOYEE
WHERE NOT EXISTS
(SELECT * FROM DEPENDENT WHERE SSN=ESSN)
Note: In Q8, the correlated nested query retrieves all DEPENDENT tuples related to an
EMPLOYEE tuple. If none exist, the EMPLOYEE tuple is selected
EXPLICIT SETS
It is also possible to use an explicit (enumerated) set of values in the WHERE-clause
rather than a nested query
Query 9: Retrieve the social security numbers of all employees who work on project
number 1, 2, or 3.
Q9: SELECT DISTINCT ESSN FROM WORKS_ON WHERE PNO IN (1, 2, 3)
NULLS IN SQL QUERIES

SQL allows queries that check if a value is NULL (missing or undefined or not
applicable). SQL uses IS or IS NOT to compare NULLs because it considers each NULL value
distinct from other NULL values, so equality comparison is not appropriate.
Query 10: Retrieve the names of all employees who do not have supervisors.
Q10: SELECT FNAME, LNAME FROM EMPLOYEE
WHERE SUPERSSN IS NULL
Note: If a join condition is specified, tuples with NULL values for the join attributes are not
included in the result
AGGREGATE FUNCTIONS
Include COUNT, SUM, MAX, MIN, and AVG
Query 11: Find the maximum salary, the minimum salary, and the average salary among
all employees.
Q11: SELECT MAX (SALARY), MIN(SALARY), AVG(SALARY)
FROM EMPLOYEE
Note: Some SQL implementations may not allow more than one function in the SELECT-clause

Query 12: Find the maximum salary, the minimum salary, and the average salary among
employees who work for the 'Research' department.
Q12: SELECT MAX (SALARY), MIN(SALARY), AVG(SALARY) FROM
EMPLOYEE, DEPARTMENT WHERE DNO=DNUMBER AND DNAME='Research'
Queries 13 and 14: Retrieve the total number of employees in the company (Q13), and the
number of employees in the 'Research' department (Q14).
Q13: SELECT COUNT (*) FROM EMPLOYEE
Q14: SELECT COUNT (*) FROM EMPLOYEE, DEPARTMENT
WHERE DNO=DNUMBER AND DNAME='Research’
GROUPING
 In many cases, we want to apply the aggregate functions to subgroups of tuples in a
relation
 Each subgroup of tuples consists of the set of tuples that have the same value for the
grouping attribute(s)
 The function is applied to each subgroup independently
 SQL has a GROUP BY-clause for specifying the grouping attributes, which must also
appear in the SELECT-clause
Query 15: For each department, retrieve the department number, the number of
employees in the department, and their average salary.
Q15: SELECT DNO, COUNT (*), AVG (SALARY)
FROM EMPLOYEE GROUP BY DNO
 In Q15, the EMPLOYEE tuples are divided into groups. Each group having the same
value for the grouping attribute DNO
 The COUNT and AVG functions are applied to each such group of tuples separately
 The SELECT-clause includes only the grouping attribute and the functions to be applied
on each group of tuples
 A join condition can be used in conjunction with grouping
Query 16: For each project, retrieve the project number, project name, and the number of
employees who work on that project.
Q16: SELECT PNUMBER, PNAME, COUNT (*)

FROM PROJECT, WORKS_ON

WHERE PNUMBER=PNO
GROUP BY PNUMBER, PNAME
THE HAVING-CLAUSE
Sometimes we want to retrieve the values of these functions for only those groups that
satisfy certain conditions. The HAVING-clause is used for specifying a selection condition on
groups (rather than on individual tuples)
Query 17: For each project on which more than two employees work, retrieve the project
number, project name, and the number of employees who work on that project.
Q17: SELECT PNUMBER, PNAME, COUNT (*)
FROM PROJECT, WORKS_ON
WHERE PNUMBER=PNO
GROUP BY PNUMBER, PNAME
HAVING COUNT (*) > 2
SUBSTRING COMPARISON
The LIKE comparison operator is used to compare partial strings. Two reserved
characters are used: '%' (or '*' in some implementations) replaces an arbitrary number of
characters, and '_' replaces a single arbitrary character.
Query 18: Retrieve all employees whose address is in Houston, Texas. Here, the value of the
ADDRESS attribute must contain the substring 'Houston,TX‘ in it.
Q18: SELECT FNAME, LNAME
FROM EMPLOYEE WHERE ADDRESS LIKE '%Houston,TX%'
Query 19: Retrieve all employees who were born during the 1950s.
Here, '5' must be the 8th character of the string (according to our format for date), so the
BDATE value is '_______5_', with each underscore as a place holder for a single arbitrary
character.
FROM EMPLOYEE WHERE BDATE LIKE '_______5_’
Note: The LIKE operator allows us to get around the fact that each value is considered atomic
and indivisible. Hence, in SQL, character string attribute values are not atomic

ARITHMETIC OPERATIONS
The standard arithmetic operators '+', '-'. '*', and '/' (for addition, subtraction,
multiplication, and division, respectively) can be applied to numeric values in an SQL query
result
Query 20: Show the effect of giving all employees who work on the 'ProductX' project a
10% raise.
Q20: SELECT FNAME, LNAME, 1.1*SALARY
FROM EMPLOYEE, WORKS_ON, PROJECT
WHERE SSN=ESSN
AND PNO=PNUMBER AND PNAME='ProductX’
ORDER BY
The ORDER BY clause is used to sort the tuples in a query result based on the values of
some attribute(s)
Query 21: Retrieve a list of employees and the projects each works in, ordered by the
employee's department, and within each department ordered alphabetically by employee
last name.
Q21: SELECT DNAME, LNAME, FNAME, PNAME
FROM DEPARTMENT, EMPLOYEE, WORKS_ON, PROJECT
WHERE DNUMBER=DNO
AND SSN=ESSN
AND PNO=PNUMBER
ORDER BY DNAME, LNAME
The default order is in ascending order of values. We can specify the keyword DESC if
we want a descending order; the keyword ASC can be used to explicitly specify ascending order,
even though it is the default
Ex: ORDER BY DNAME DESC, LNAME ASC, FNAME ASC
MORE EXAMPLE QUERIES:
Query 22: Retrieve the names of all employees who have two or more dependents.
Q22: SELECT LNAME, FNAME FROM
EMPLOYEE

WHERE (SELECT COUNT (*) FROM DEPENDENT

WHERE SSN=ESSN) ≥ 2);
Query 23: List the names of managers who have least one dependent.
FROM EMPLOYEE
WHERE EXISTS (SELECT * FROM DEPENDENT WHERE SSN=ESSN)
AND EXISTS ( SELECT * FROM DEPARTMENT WHERE SSN=MGRSSN );

SPECIFYING UPDATES IN SQL
There are three SQL commands to modify the database: INSERT, DELETE, and UPDATE.
INSERT
 In its simplest form, it is used to add one or more tuples to a relation

 Attribute values should be listed in the same order as the attributes were specified in the
CREATE TABLE command
Example:
INSERT INTO EMPLOYEE VALUES ('Richard','K','Marini', '653298653', '30-DEC-52',
'98 Oak Forest,Katy,TX', 'M', 37000,'987654321', 4 )
 An alternate form of INSERT specifies explicitly the attribute names that correspond to
the values in the new tuple. Attributes with NULL values can be left out
Example: Insert a tuple for a new EMPLOYEE for whom we only know the FNAME, LNAME,
and SSN attributes.
INSERT INTO EMPLOYEE (FNAME, LNAME, SSN)VALUES ('Richard', 'Marini',
'653298653')
Important Note: Only the constraints specified in the DDL commands are automatically
enforced by the DBMS when updates are applied to the database. Another variation of INSERT
allows insertion of multiple tuples resulting from a query into a relation
Example: Suppose we want to create a temporary table that has the name, number of employees,
and total salaries for each department. A table DEPTS_INFO is created first, and is loaded with
the summary information retrieved from the database by the query.
CREATE TABLE DEPTS_INFO
(DEPT_NAME VARCHAR (10),

NO_OF_EMPS INTEGER, TOTAL_SAL INTEGER);
INSERT INTO DEPTS_INFO (DEPT_NAME, NO_OF_EMPS, TOTAL_SAL)

SELECT DNAME, COUNT (*), SUM (SALARY) FROM DEPARTMENT,
EMPLOYEE WHERE DNUMBER=DNO GROUP BY DNAME ;
Note: The DEPTS_INFO table may not be up-to-date if we change the tuples in either the
DEPARTMENT or the EMPLOYEE relations after issuing the above. We have to create a view
(see later) to keep such a table up to date.
DELETE
 Removes tuples from a relation. Includes a WHERE-clause to select the tuples to be
deleted
 Referential integrity should be enforced
 Tuples are deleted from only one table at a time (unless CASCADE is specified on a
referential integrity constraint)
 A missing WHERE-clause specifies that all tuples in the relation are to be deleted; the
table then becomes an empty table
 The number of tuples deleted depends on the number of tuples in the relation that satisfy
the WHERE-clause
Examples:
1: DELETE FROM EMPLOYEE WHERE LNAME='Brown’;
2: DELETE FROM EMPLOYEE WHERE SSN='123456789’;
3: DELETE FROM EMPLOYEE WHERE DNO IN (SELECT DNUMBER
FROM DEPARTMENT WHERE DNAME='Research');
4: DELETE FROM EMPLOYEE;
UPDATE
 Used to modify attribute values of one or more selected tuples
 A WHERE-clause selects the tuples to be modified
 An additional SET-clause specifies the attributes to be modified and their new values
 Each command modifies tuples in the same relation
 Referential integrity should be enforced

Example1: Change the location and controlling department number of project number 10 to
'Bellaire' and 5, respectively.
UPDATE PROJECT
SET PLOCATION = 'Bellaire', DNUM = 5 WHERE PNUMBER=10;
Example2: Give all employees in the 'Research' department a 10% raise in salary.
UPDATE EMPLOYEE
SET SALARY = SALARY *1.1
WHERE DNO IN (SELECT DNUMBER FROM DEPARTMENT
WHERE DNAME='Research');
SQL TRIGGERS
 Objective: to monitor a database and take initiate action when a condition occurs
 Triggers are nothing but the procedures/functions that involve actions and fired/executed
automatically whenever an event occurs such as an insert, delete, or update operation or
pressing a button or when mouse button is clicked
VIEWS IN SQL
 A view is a single virtual table that is derived from other tables. The other tables could be
base tables or previously defined view.
 Allows for limited update operations Since the table may not physically be stored
 Allows full query operations
 A convenience for expressing certain operations
 A view does not necessarily exist in physical form, which limits the possible update
operations that can be applied to views.

LAB EXPERIMENTS
PART A: SQL PROGRAMMING
A. Consider the following schema for a Library Database:
BOOK (Book_id, Title, Publisher_Name, Pub_Year)

BOOK_AUTHORS (Book_id, Author_Name)
PUBLISHER (Name, Address, Phone)
BOOK_COPIES (Book_id, Branch_id, No-of_Copies)
BOOK_LENDING (Book_id, Branch_id, Card_No, Date_Out, Due_Date)
LIBRARY_BRANCH (Branch_id, Branch_Name, Address)

1. Retrieve details of all books in the library – id, title, name of publisher, authors,
number of copies in each branch, etc.
2. Get the particulars of borrowers who have borrowed more than 3 books, but from Jan
2017 to Jun 2017
3. Delete a book in BOOK table. Update the contents of other tables to reflect this data
manipulation operation.
4. Partition the BOOK table based on year of publication. Demonstrate its working with a
simple query.
5. Create a view of all books and its number of copies that are currently available in the
Library.
Solution:
Entity-Relationship Diagram
Author_Name
Book_id Title
Pub_Year M N
Book written-by Book_Authors
Has
Published-by
N No_of_copies
Branch_id
Publisher_Name
M M N
1 Book_Copies In Library_Branch
Branch_Name
Address
Publisher
N Address
Date_out
Book_Lending
Phone
Card_No
Due_date
N
Card

Schema Diagram
Book
Book_id Title Pub_Year Publisher_Name
Book_Authors
Book_id Author_name
Publisher
Name Phone_no Address
Book_Copies
Book_id Branch_id No_of_Copies
Book_Lending
Book_id Branch_id Card_no Date_out Due_date
Library_Branch
Branch_id Address Branch_name
Table Creation
CREATE TABLE PUBLISHER

(NAME VARCHAR2 (20) PRIMARY KEY,
PHONE INTEGER,
ADDRESS VARCHAR2 (20));
CREATE TABLE BOOK

(BOOK_ID INTEGER PRIMARY KEY,
TITLE VARCHAR2 (20),
PUB_YEAR VARCHAR2 (20),
PUBLISHER_NAME REFERENCES PUBLISHER (NAME) ON DELETE CASCADE);

CREATE TABLE BOOK_AUTHORS

(AUTHOR_NAME VARCHAR2 (20),
BOOK_ID REFERENCES BOOK (BOOK_ID) ON DELETE CASCADE,
PRIMARY KEY (BOOK_ID, AUTHOR_NAME));
CREATE TABLE LIBRARY_BRANCH

(BRANCH_ID INTEGER PRIMARY KEY,
BRANCH_NAME VARCHAR2 (50),
ADDRESS VARCHAR2 (50));
CREATE TABLE BOOK_COPIES

(NO_OF_COPIES INTEGER,
BRANCH_ID REFERENCES LIBRARY_BRANCH (BRANCH_ID) ON DELETE
CASCADE,
PRIMARY KEY (BOOK_ID, BRANCH_ID));
CREATE TABLE CARD

(CARD_NO INTEGER PRIMARY KEY);
CREATE TABLE BOOK_LENDING

(DATE_OUT DATE,
DUE_DATE DATE,
BRANCH_ID REFERENCES LIBRARY_BRANCH (BRANCH_ID) ON DELETE
CASCADE,
CARD_NO REFERENCES CARD (CARD_NO) ON DELETE CASCADE,
PRIMARY KEY (BOOK_ID, BRANCH_ID, CARD_NO));
Table Descriptions
DESC PUBLISHER;
DESC BOOK;

DESC BOOK_AUTHORS;
DESC LIBRARY_BRANCH;
DESC BOOK_COPIES;
DESC CARD;
DESC BOOK_LENDING;

Insertion of Values to Tables
INSERT INTO PUBLISHER VALUES (‘MCGRAW-HILL’, 9989076587, ‘BANGALORE’);

INSERT INTO PUBLISHER VALUES (‘PEARSON’, 9889076565, ‘NEWDELHI’);
INSERT INTO PUBLISHER VALUES (‘RANDOM HOUSE’, 7455679345, ‘HYDRABAD’);
INSERT INTO PUBLISHER VALUES (‘HACHETTE LIVRE’, 8970862340, ‘CHENAI’);
INSERT INTO PUBLISHER VALUES (‘GRUPO PLANETA’, 7756120238, ‘BANGALORE’);
INSERT INTO BOOK VALUES (1,’DBMS’,’JAN-2017’, ‘MCGRAW-HILL’);

INSERT INTO BOOK VALUES (2,’ADBMS’,’JUN-2016’, ‘MCGRAW-HILL’);
INSERT INTO BOOK VALUES (3,’CN’,’SEP-2016’, ‘PEARSON’);
INSERT INTO BOOK VALUES (4,’CG’,’SEP-2015’, ‘GRUPO PLANETA’);
INSERT INTO BOOK VALUES (5,’OS’,’MAY-2016’, ‘PEARSON’);
INSERT INTO BOOK_AUTHORS VALUES (’NAVATHE’, 1);

INSERT INTO BOOK_AUTHORS VALUES (’NAVATHE’, 2);
INSERT INTO BOOK_AUTHORS VALUES (’TANENBAUM’, 3);
INSERT INTO BOOK_AUTHORS VALUES (’EDWARD ANGEL’, 4);
INSERT INTO BOOK_AUTHORS VALUES (’GALVIN’, 5);
INSERT INTO LIBRARY_BRANCH VALUES (10,’RR NAGAR’,’BANGALORE’);

INSERT INTO LIBRARY_BRANCH VALUES (11,’RNSIT’,’BANGALORE’);
INSERT INTO LIBRARY_BRANCH VALUES (12,’RAJAJI NAGAR’, ’BANGALORE’);
INSERT INTO LIBRARY_BRANCH VALUES (13,’NITTE’,’MANGALORE’);
INSERT INTO LIBRARY_BRANCH VALUES (14,’MANIPAL’,’UDUPI’);
INSERT INTO BOOK_COPIES VALUES (10, 1, 10);

INSERT INTO CARD VALUES (100);


INSERT INTO BOOK_LENDING VALUES (’01-JAN-17’,’01-JUN-17’, 1, 10, 101);

INSERT INTO BOOK_LENDING VALUES (’11-JAN-17’,’11-MAR-17’, 3, 14, 101);
INSERT INTO BOOK_LENDING VALUES (’21-FEB-17’,’21-APR-17’, 2, 13, 101);
INSERT INTO BOOK_LENDING VALUES (’15-MAR-17’,’15-JUL-17’, 4, 11, 101);
INSERT INTO BOOK_LENDING VALUES (‘12-APR-17’,’12-MAY-17’, 1, 11, 104);
SELECT * FROM PUBLISHER;
SELECT * FROM BOOK;
SELECT * FROM BOOK_AUTHORS;
SELECT * FROM LIBRARY_BRANCH;
SELECT * FROM BOOK_COPIES;

SELECT * FROM CARD;
SELECT * FROM BOOK_LENDING;
Queries:
1. Retrieve details of all books in the library – id, title, name of publisher, authors,
number of copies in each branch, etc.
SELECT B.BOOK_ID, B.TITLE, B.PUBLISHER_NAME, A.AUTHOR_NAME,

C.NO_OF_COPIES, L.BRANCH_ID
FROM BOOK B, BOOK_AUTHORS A, BOOK_COPIES C, LIBRARY_BRANCH L
WHERE B.BOOK_ID=A.BOOK_ID
AND B.BOOK_ID=C.BOOK_ID
AND L.BRANCH_ID=C.BRANCH_ID;

1. Get the particulars of borrowers who have borrowed more than 3 books, but from
Jan 2017 to Jun 2017.
SELECT CARD_NO
FROM BOOK_LENDING
WHERE DATE_OUT BETWEEN ’01-JAN-2017’ AND ’01-JUL-2017’
GROUP BY CARD_NO
HAVING COUNT (*)>3;
2. Delete a book in BOOK table. Update the contents of other tables to reflect this data
manipulation operation.
DELETE FROM BOOK

WHERE BOOK_ID=3;
3. Partition the BOOK table based on year of publication. Demonstrate its working with a
simple query.
CREATE VIEW V_PUBLICATION AS

SELECT PUB_YEAR
FROM BOOK;

4. Create a view of all books and its number of copies that are currently available in the
Library.
CREATE VIEW V_BOOKS AS

SELECT B.BOOK_ID, B.TITLE, C.NO_OF_COPIES
FROM BOOK B, BOOK_COPIES C, LIBRARY_BRANCH L
WHERE B.BOOK_ID=C.BOOK_ID
AND C.BRANCH_ID=L.BRANCH_ID;

B. Consider the following schema for Order Database:
SALESMAN (Salesman_id, Name, City, Commission)

CUSTOMER (Customer_id, Cust_Name, City, Grade, Salesman_id)
ORDERS (Ord_No, Purchase_Amt, Ord_Date, Customer_id, Salesman_id)
2. Find the name and numbers of all salesmen who had more than one customer.
3. List all salesmen and indicate those who have and don’t have customers in their cities
(Use UNION operation.)
4. Create a view that finds the salesman who has the customer with the highest order of a
day.
5. Demonstrate the DELETE operation by removing salesman with id 1000. All his orders
must also be deleted.
Solution:

Schema Diagram
Salesman
Salesman_id Name City Commission
Customer
Customer_id Cust_Name City Grade Salesman_id
Orders
Ord_No Purchase_Amt Ord_Date Customer_id Salesman_id
Table Creation
CREATE TABLE SALESMAN

(SALESMAN_ID NUMBER (4),
NAME VARCHAR2 (20),
CITY VARCHAR2 (20),
COMMISSION VARCHAR2 (20),
PRIMARY KEY (SALESMAN_ID));
CREATE TABLE CUSTOMER1

(CUSTOMER_ID NUMBER (4),
CUST_NAME VARCHAR2 (20),
CITY VARCHAR2 (20),
GRADE NUMBER (3),
PRIMARY KEY (CUSTOMER_ID),
SALESMAN_ID REFERENCES SALESMAN (SALESMAN_ID) ON DELETE SET NULL);
CREATE TABLE ORDERS

(ORD_NO NUMBER (5),
PURCHASE_AMT NUMBER (10, 2),
ORD_DATE DATE,
PRIMARY KEY (ORD_NO),
CUSTOMER_ID REFERENCES CUSTOMER1 (CUSTOMER_ID) ON DELETE CASCADE,
SALESMAN_ID REFERENCES SALESMAN (SALESMAN_ID) ON DELETE CASCADE);

Table Descriptions
DESC SALESMAN;
DESC CUSTOMER;
DESC ORDERS;
INSERT INTO SALESMAN VALUES (1000, ‘JOHN’,’BANGALORE’,’25 %’);

INSERT INTO SALESMAN VALUES (2000, ‘RAVI’,’BANGALORE’,’20 %’);
INSERT INTO SALESMAN VALUES (3000, ‘KUMAR’,’MYSORE’,’15 %’);
INSERT INTO SALESMAN VALUES (4000, ‘SMITH’,’DELHI’,’30 %’);
INSERT INTO SALESMAN VALUES (5000, ‘HARSHA’,’HYDRABAD’,’15 %’);
INSERT INTO CUSTOMER1 VALUES (10, ‘PREETHI’,’BANGALORE’, 100, 1000);

INSERT INTO CUSTOMER1 VALUES (11, ‘VIVEK’,’MANGALORE’, 300, 1000);
INSERT INTO CUSTOMER1 VALUES (12, ‘BHASKAR’,’CHENNAI’, 400, 2000);
INSERT INTO CUSTOMER1 VALUES (13, ‘CHETHAN’,’BANGALORE’, 200, 2000);
INSERT INTO CUSTOMER1 VALUES (14, ‘MAMATHA’,’BANGALORE’, 400, 3000);
INSERT INTO ORDERS VALUES (50, 5000, ‘04-MAY-17’, 10, 1000);

INSERT INTO ORDERS VALUES (51, 450, ‘20-JAN-17’, 10, 2000);

INSERT INTO ORDERS VALUES (52, 1000, ‘24-FEB-17’, 13, 2000);

INSERT INTO ORDERS VALUES (53, 3500, ‘13-APR-17’, 14, 3000);
INSERT INTO ORDERS VALUES (54, 550, ‘09-MAR-17’, 12, 2000);
SELECT * FROM SALESMAN;
SELECT * FROM CUSTOMER1;
SELECT * FROM ORDERS;
Queries:

SELECT GRADE, COUNT (DISTINCT CUSTOMER_ID)
FROM CUSTOMER1
GROUP BY GRADE
HAVING GRADE > (SELECT AVG(GRADE)
FROM CUSTOMER1
WHERE CITY='BANGALORE');

2. Find the name and numbers of all salesmen who had more than one customer.
SELECT SALESMAN_ID, NAME

FROM SALESMAN A
WHERE 1 < (SELECT COUNT (*)
FROM CUSTOMER1
WHERE SALESMAN_ID=A.SALESMAN_ID);
3. List all salesmen and indicate those who have and don’t have customers in their
cities (Use UNION operation.)
SELECT SALESMAN.SALESMAN_ID, NAME, CUST_NAME, COMMISSION

FROM SALESMAN, CUSTOMER1
WHERE SALESMAN.CITY = CUSTOMER1.CITY
UNION
SELECT SALESMAN_ID, NAME, 'NO MATCH', COMMISSION
FROM SALESMAN
WHERE NOT CITY = ANY
(SELECT CITY
FROM CUSTOMER1)
ORDER BY 2 DESC;
4. Create a view that finds the salesman who has the customer with the highest order
of a day.
CREATE VIEW ELITSALESMANAS

SELECT B.ORD_DATE, A.SALESMAN_ID, A.NAME
FROM SALESMAN A, ORDERS B

WHERE A.SALESMAN_ID = B.SALESMAN_ID

AND B.PURCHASE_AMT=(SELECT MAX (PURCHASE_AMT)
FROM ORDERS C
WHERE C.ORD_DATE = B.ORD_DATE);
5. Demonstrate the DELETE operation by removing salesman with id 1000. All his orders
must also be deleted.
Use ON DELETE CASCADE at the end of foreign key definitions while creating child table
orders and then execute the following:
Use ON DELETE SET NULL at the end of foreign key definitions while creating child table
customers and then executes the following:
DELETE FROM SALESMAN

WHERE SALESMAN_ID=1000;
OR
We can also write the trigger, if not ON DELETE CASCADE;
CREATE TRIGGER ‘DEL_SALESMAN’ AFTER DELETE ON ‘SALESMAN’

FOR EACH ROW
BEGIN
DELETE FROM ORDERS WHERE SALESMAN_ID = OLD.SALESMAN_ID;
UPDATE CUSTOMER1 SET SALESMAN_ID=NULL WHERE SALESMAN_ID =
OLD.SALESMAN_ID;
END

C. Consider the schema for Movie Database:
ACTOR (Act_id, Act_Name, Act_Gender)

DIRECTOR (Dir_id, Dir_Name, Dir_Phone)
MOVIES (Mov_id, Mov_Title, Mov_Year, Mov_Lang, Dir_id)
MOVIE_CAST (Act_id, Mov_id, Role)
RATING (Mov_id, Rev_Stars)
2. Find the movie names where one or more actors acted in two or more movies.
3. List all actors who acted in a movie before 2000 and also in a movie after
2015 (use JOIN operation).
4. Find the title of movies and number of stars for each movie that has at least one
rating and find the highest number of stars that movie received. Sort the result by
movie title.
5. Update rating of all movies directed by ‘Steven Spielberg’ to 5.
Solution:
Dir_id Dir_Name
Act_id Act_Name
Dir_Phone
Act_Gender Actor Director
M
Has
Movie_Cast
N
Role
Rev_Stars
N Movies
Mov_Lang
Mov_id
Mov_Title Mov_Year

Schema Diagram
Actor
Act_id Act_Name Act_Gender
Director
Dir_id Dir_Name Dir_Phone
Movies
Mov_id Mov_Title Mov_Year Mov_Lang Dir_id
Movie_Cast
Act_id Mov_id Role
Rating
Mov_id Rev_Stars
Table Creation
CREATE TABLE ACTOR (

ACT_ID NUMBER (3),
ACT_NAME VARCHAR (20),
ACT_GENDER CHAR (1),
PRIMARY KEY (ACT_ID));
CREATE TABLE DIRECTOR (

DIR_ID NUMBER (3),
DIR_NAME VARCHAR (20),
DIR_PHONE NUMBER (10),
PRIMARY KEY (DIR_ID));
CREATE TABLE MOVIES (

MOV_ID NUMBER (4),
MOV_TITLE VARCHAR (25),
MOV_YEAR NUMBER (4),
MOV_LANG VARCHAR (12),
DIR_ID NUMBER (3),
PRIMARY KEY (MOV_ID),
FOREIGN KEY (DIR_ID) REFERENCES DIRECTOR (DIR_ID));
CREATE TABLE MOVIE_CAST (

ACT_ID NUMBER (3),

MOV_ID NUMBER (4),
ROLE VARCHAR (10),
PRIMARY KEY (ACT_ID, MOV_ID),
FOREIGN KEY (ACT_ID) REFERENCES ACTOR (ACT_ID),
FOREIGN KEY (MOV_ID) REFERENCES MOVIES (MOV_ID));
CREATE TABLE RATING (

MOV_ID NUMBER (4),
REV_STARS VARCHAR (25),
PRIMARY KEY (MOV_ID),
FOREIGN KEY (MOV_ID) REFERENCES MOVIES (MOV_ID));
Table Descriptions
DESC ACTOR;
DESC DIRECTOR;
DESC MOVIES;

DESC MOVIE_CAST;
DESC RATING;
INSERT INTO ACTOR VALUES (301,’ANUSHKA’,’F’);

INSERT INTO ACTOR VALUES (302,’PRABHAS’,’M’);
INSERT INTO ACTOR VALUES (303,’PUNITH’,’M’);
INSERT INTO ACTOR VALUES (304,’JERMY’,’M’);
INSERT INTO DIRECTOR VALUES (60,’RAJAMOULI’, 8751611001);

INSERT INTO DIRECTOR VALUES (61,’HITCHCOCK’, 7766138911);
INSERT INTO DIRECTOR VALUES (62,’FARAN’, 9986776531);
INSERT INTO DIRECTOR VALUES (63,’STEVEN SPIELBERG’, 8989776530);
INSERT INTO MOVIES VALUES (1001,’BAHUBALI-2’, 2017, ‘TELAGU’, 60);

INSERT INTO MOVIES VALUES (1002,’BAHUBALI-1’, 2015, ‘TELAGU’, 60);
INSERT INTO MOVIES VALUES (1003,’AKASH’, 2008, ‘KANNADA’, 61);
INSERT INTO MOVIES VALUES (1004,’WAR HORSE’, 2011, ‘ENGLISH’, 63);
INSERT INTO MOVIE_CAST VALUES (301, 1002, ‘HEROINE’);

INSERT INTO MOVIE_CAST VALUES (301, 1001, ‘HEROINE’);
INSERT INTO MOVIE_CAST VALUES (303, 1003, ‘HERO’);
INSERT INTO MOVIE_CAST VALUES (303, 1002, ‘GUEST’);
INSERT INTO MOVIE_CAST VALUES (304, 1004, ‘HERO’);
INSERT INTO RATING VALUES (1001, 4);


SELECT * FROM ACTOR;
SELECT * FROM DIRECTOR;
SELECT * FROM MOVIES;
SELECT * FROM MOVIE_CAST;

SELECT * FROM RATING;
Queries:
SELECT MOV_TITLE
FROM MOVIES
WHERE DIR_ID IN (SELECT DIR_ID
FROM DIRECTOR
WHERE DIR_NAME = ‘HITCHCOCK’);
2. Find the movie names where one or more actors acted in two or more movies.
SELECT MOV_TITLE
FROM MOVIES M, MOVIE_CAST MV
WHERE M.MOV_ID=MV.MOV_ID AND ACT_ID IN (SELECT ACT_ID
FROM MOVIE_CAST GROUP BY ACT_ID
HAVING COUNT (ACT_ID)>1)
GROUP BY MOV_TITLE
HAVING COUNT (*)>1;
3. List all actors who acted in a movie before 2000 and also in a movie after 2015 (use
JOIN operation).
SELECT ACT_NAME, MOV_TITLE, MOV_YEAR

FROM ACTOR A

JOIN MOVIE_CAST C
ON A.ACT_ID=C.ACT_ID
JOIN MOVIES M
ON C.MOV_ID=M.MOV_ID
WHERE M.MOV_YEAR NOT BETWEEN 2000 AND 2015;
OR
SELECT A.ACT_NAME, A.ACT_NAME, C.MOV_TITLE, C.MOV_YEAR

FROM ACTOR A, MOVIE_CAST B, MOVIES C
WHERE A.ACT_ID=B.ACT_ID
AND B.MOV_ID=C.MOV_ID
AND C.MOV_YEAR NOT BETWEEN 2000 AND 2015;
4. Find the title of movies and number of stars for each movie that has at least one
rating and find the highest number of stars that movie received. Sort the result by
movie title.
SELECT MOV_TITLE, MAX (REV_STARS)

FROM MOVIES
INNER JOIN RATING USING (MOV_ID)
GROUP BY MOV_TITLE
HAVING MAX (REV_STARS)>0
ORDER BY MOV_TITLE;
5. Update rating of all movies directed by ‘Steven Spielberg’ to 5

KL
UPDATE RATING
SET REV_STARS=5

WHERE MOV_ID IN (SELECT MOV_ID FROM MOVIES

WHERE DIR_ID IN (SELECT DIR_ID
FROM DIRECTOR
WHERE DIR_NAME = ‘STEVEN
SPIELBERG’));

D. Consider the schema for College Database:
STUDENT (USN, SName, Address, Phone, Gender)

SEMSEC (SSID, Sem, Sec)
CLASS (USN, SSID)
SUBJECT (Subcode, Title, Sem, Credits)
IAMARKS (USN, Subcode, SSID, Test1, Test2, Test3, FinalIA)
2. Compute the total number of male and female students in each semester and in each
section.
3. Create a view of Test1 marks of student USN ‘1BI15CS101’ in all subjects.
4. Calculate the FinalIA (average of best two test marks) and update the
corresponding table for all students.
5. Categorize students based on the following criterion:
If FinalIA = 17 to 20 then CAT = ‘Outstanding’
If FinalIA = 12 to 16 then CAT = ‘Average’
If FinalIA< 12 then CAT = ‘Weak’
Give these details only for 8th semester A, B, and C section students.
Solution:
Entity - Relationship Diagram

Schema Diagram
Table Creation
CREATE TABLE STUDENT (

USN VARCHAR (10) PRIMARY KEY,
SNAME VARCHAR (25),
ADDRESS VARCHAR (25),
PHONE NUMBER (10),
GENDER CHAR (1));
CREATE TABLE SEMSEC (

SSID VARCHAR (5) PRIMARY KEY,
SEM NUMBER (2),
SEC CHAR (1));
CREATE TABLE CLASS (

USN VARCHAR (10),
SSID VARCHAR (5),
PRIMARY KEY (USN, SSID),
FOREIGN KEY (USN) REFERENCES STUDENT (USN),
FOREIGN KEY (SSID) REFERENCES SEMSEC (SSID));

CREATE TABLE SUBJECT (

SUBCODE VARCHAR (8),
TITLE VARCHAR (20),
SEM NUMBER (2),
CREDITS NUMBER (2),
PRIMARY KEY (SUBCODE));
CREATE TABLE IAMARKS (

USN VARCHAR (10),
SUBCODE VARCHAR (8),
SSID VARCHAR (5),
TEST1 NUMBER (2),
TEST2 NUMBER (2),
TEST3 NUMBER (2),
FINALIA NUMBER (2),
PRIMARY KEY (USN, SUBCODE, SSID),
FOREIGN KEY (USN) REFERENCES STUDENT (USN),
FOREIGN KEY (SUBCODE) REFERENCES SUBJECT (SUBCODE),
FOREIGN KEY (SSID) REFERENCES SEMSEC (SSID));
Table Descriptions
DESC STUDENT;
DESC SEMSEC;

DESC CLASS;
DESC SUBJECT;
DESC IAMARKS;
Insertion of values to tables
INSERT INTO STUDENT VALUES ('1RN13CS020','AKSHAY','BELAGAVI',

8877881122,'M');
INSERT INTO STUDENT VALUES ('1RN13CS062','SANDHYA','BENGALURU',
7722829912,'F');
INSERT INTO STUDENT VALUES ('1RN13CS091','TEESHA','BENGALURU',
7712312312,'F');
INSERT INTO STUDENT VALUES ('1RN13CS066','SUPRIYA','MANGALURU',
8877881122,'F');
INSERT INTO STUDENTVALUES ('1RN14CS010','ABHAY','BENGALURU',
9900211201,'M');
INSERT INTO STUDENT VALUES ('1RN14CS032','BHASKAR','BENGALURU',
9923211099,'M');
INSERT INTO STUDENTVALUES ('1RN14CS025','ASMI','BENGALURU', 7894737377,'F');
INSERT INTO STUDENT VALUES ('1RN15CS011','AJAY','TUMKUR', 9845091341,'M');

INSERT INTO STUDENT VALUES ('1RN15CS029','CHITRA','DAVANGERE',

7696772121,'F');
INSERT INTO STUDENT VALUES ('1RN15CS045','JEEVA','BELLARY', 9944850121,'M');
INSERT INTO STUDENT VALUES ('1RN15CS091','SANTOSH','MANGALURU',
8812332201,'M');
INSERT INTO STUDENT VALUES ('1RN16CS045','ISMAIL','KALBURGI',
9900232201,'M');
INSERT INTO STUDENT VALUES ('1RN16CS088','SAMEERA','SHIMOGA',
9905542212,'F');
INSERT INTO STUDENT VALUES ('1RN16CS122','VINAYAKA','CHIKAMAGALUR',
8800880011,'M');
INSERT INTO SEMSEC VALUES ('CSE8A', 8,'A');

INSERT INTO SEMSEC VALUES (‘CSE8B', 8,'B');
INSERT INTO SEMSEC VALUES (‘CSE8C’, 8,’C’);
INSERT INTO SEMSEC VALUES ('CSE7A', 7,’A’);

INSERT INTO SEMSEC VALUES (‘CSE7B’, 7,'B’);
INSERT INTO SEMSEC VALUES ('CSE7C', 7,'C');
INSERT INTO SEMSEC VALUES (‘CSE6A', 6,'A');

INSERT INTO SEMSEC VALUES (‘CSE6B’, 6,’B’);
INSERT INTO SEMSEC VALUES ('CSE6C’, 6,’C’);
INSERT INTO SEMSEC VALUES (‘CSE5A’, 5,'A’);

INSERT INTO SEMSEC VALUES ('CSE5B', 5,'B');
INSERT INTO SEMSEC VALUES (‘CSE5C', 5,'C');
INSERT INTO SEMSEC VALUES (‘CSE4A’, 4,’A’);

INSERT INTO SEMSEC VALUES ('CSE4B', 4,’B’);
INSERT INTO SEMSEC VALUES (‘CSE4C’, 4,'C’);
INSERT INTO SEMSEC VALUES ('CSE3A', 3,'A');

INSERT INTO SEMSEC VALUES (‘CSE3B', 3,'B');
INSERT INTO SEMSEC VALUES (‘CSE3C’, 3,’C’);
INSERT INTO SEMSEC VALUES ('CSE2A', 2,’A’);

INSERT INTO SEMSEC VALUES (‘CSE2B’, 2,'B’);
INSERT INTO SEMSEC VALUES ('CSE2C', 2,'C');
INSERT INTO SEMSEC VALUES (‘CSE1A', 1,'A');

INSERT INTO SEMSEC VALUES (‘CSE1B’, 1,’B’);

INSERT INTO SEMSEC VALUES ('CSE1C', 1,’C’);
INSERT INTO CLASS VALUES (‘1RN13CS020’,’CSE8A’);

INSERT INTO CLASS VALUES (‘1RN13CS066’,’CSE8B’);
INSERT INTO CLASS VALUES (‘1RN13CS091’,’CSE8C’);



INSERT INTO SUBJECT VALUES ('10CS81','ACA', 8, 4);

INSERT INTO SUBJECT VALUES ('10CS82','SSM', 8, 4);
INSERT INTO SUBJECT VALUES ('10CS83','NM', 8, 4);
INSERT INTO SUBJECT VALUES ('10CS84','CC', 8, 4);
INSERT INTO SUBJECT VALUES ('10CS85','PW', 8, 4);
INSERT INTO SUBJECT VALUES ('10CS71','OOAD', 7, 4);

INSERT INTO SUBJECT VALUES ('10CS72','ECS', 7, 4);
INSERT INTO SUBJECT VALUES ('10CS73','PTW', 7, 4);
INSERT INTO SUBJECT VALUES ('10CS74','DWDM', 7, 4);
INSERT INTO SUBJECT VALUES (‘10CS75','JAVA', 7, 4);
INSERT INTO SUBJECT VALUES ('10CS76','SAN', 7, 4);
INSERT INTO SUBJECT VALUES ('15CS51', 'ME', 5, 4);

INSERT INTO SUBJECT VALUES ('15CS52','CN', 5, 4);
INSERT INTO SUBJECT VALUES ('15CS53','DBMS', 5, 4);
INSERT INTO SUBJECT VALUES ('15CS54','ATC', 5, 4);
INSERT INTO SUBJECT VALUES ('15CS55','JAVA', 5, 3);
INSERT INTO SUBJECT VALUES ('15CS56','AI', 5, 3);

INSERT INTO SUBJECT VALUES ('15CS41','M4', 4, 4);

INSERT INTO SUBJECT VALUES ('15CS42','SE', 4, 4);
INSERT INTO SUBJECT VALUES ('15CS43','DAA', 4, 4);
INSERT INTO SUBJECT VALUES ('15CS44','MPMC', 4, 4);
INSERT INTO SUBJECT VALUES ('15CS45','OOC', 4, 3);
INSERT INTO SUBJECT VALUES ('15CS46','DC', 4, 3);
INSERT INTO SUBJECT VALUES ('15CS31','M3', 3, 4);

INSERT INTO SUBJECT VALUES ('15CS32','ADE', 3, 4);
INSERT INTO SUBJECT VALUES ('15CS33','DSA', 3, 4);
INSERT INTO SUBJECT VALUES ('15CS34','CO', 3, 4);
INSERT INTO SUBJECT VALUES ('15CS35','USP', 3, 3);
INSERT INTO SUBJECT VALUES ('15CS36','DMS', 3, 3);
INSERT INTO IAMARKS (USN, SUBCODE, SSID, TEST1, TEST2, TEST3) VALUES
('1RN13CS091','10CS81','CSE8C', 15, 16, 18);
('1RN13CS091','10CS82','CSE8C', 12, 19, 14);
('1RN13CS091','10CS83','CSE8C', 19, 15, 20);
('1RN13CS091','10CS84','CSE8C', 20, 16, 19);
('1RN13CS091','10CS85','CSE8C', 15, 15, 12);
SELECT * FROM STUDENT;

SELECT * FROM SEMSEC;
SELECT * FROM CLASS;

SELECT * FROM SUBJECT;
SELECT * FROM IAMARKS;
Queries:
SELECT S.*, SS.SEM, SS.SEC
FROM STUDENT S, SEMSEC SS, CLASS C
WHERE S.USN = C.USN AND
SS.SSID = C.SSID AND
SS.SEM = 4 AND

SS.SEc=’C’;
2. Compute the total number of male and female students in each semester and in each
section.
SELECT SS.SEM, SS.SEC, S.GENDER, COUNT (S.GENDER) AS COUNT

FROM STUDENT1 S, SEMSEC SS, CLASS C
WHERES.USN = C.USN AND
SS.SSID = C.SSID
GROUP BY SS.SEM, SS.SEC, S.GENDER
ORDER BY SEM;
3. Create a view of Test1 marks of student USN ‘1BI15CS101’ in all subjects.

CREATE VIEW STU_TEST1_MARKS_VIEW
AS
SELECT TEST1, SUBCODE
FROM IAMARKS
WHERE USN = '1RN13CS091';

4. Calculate the FinalIA (average of best two test marks) and update the corresponding
table for all students.
CREATE OR REPLACE PROCEDURE AVGMARKS
IS
CURSOR C_IAMARKS IS
SELECT GREATEST(TEST1,TEST2) AS A, GREATEST(TEST1,TEST3) AS B,
GREATEST(TEST3,TEST2) AS C
FROM IAMARKS
WHERE FINALIA IS NULL
FOR UPDATE;
C_A NUMBER;
C_B NUMBER;
C_C NUMBER;
C_SM NUMBER;
C_AV NUMBER;
BEGIN
OPEN C_IAMARKS;
LOOP
FETCH C_IAMARKS INTO C_A, C_B, C_C;
EXIT WHEN C_IAMARKS%NOTFOUND;
--DBMS_OUTPUT.PUT_LINE(C_A || ' ' || C_B || ' ' || C_C);
IF (C_A != C_B) THEN
C_SM:=C_A+C_B;
ELSE
C_SM:=C_A+C_C;
END IF;
C_AV:=C_SM/2;
--DBMS_OUTPUT.PUT_LINE('SUM = '||C_SM);
--DBMS_OUTPUT.PUT_LINE('AVERAGE = '||C_AV);
UPDATE IAMARKS SET FINALIA=C_AV WHERE CURRENT OF C_IAMARKS;
END LOOP;
CLOSE C_IAMARKS;
END;
/
Note: Before execution of PL/SQL procedure, IAMARKS table contents are:

SELECT * FROM IAMARKS;
Below SQL code is to invoke the PL/SQL stored procedure from the command line:
BEGIN
AVGMARKS; --IT INVOKES THE STORED PROCEDURE
END;
/
5. Categorize students based on the following criterion:

If FinalIA = 17 to 20 then CAT = ‘Outstanding’
If FinalIA = 12 to 16 then CAT = ‘Average’
If FinalIA< 12 then CAT = ‘Weak’
Give these details only for 8th semester A, B, and C section students.
SELECT S.USN,S.SNAME,S.ADDRESS,S.PHONE,S.GENDER,
(CASE
WHEN IA.FINALIA BETWEEN 17 AND 20 THEN 'OUTSTANDING'
WHEN IA.FINALIA BETWEEN 12 AND 16 THEN 'AVERAGE'
ELSE 'WEAK'
END) AS CAT
FROM STUDENT S, SEMSEC SS, IAMARKS IA, SUBJECT SUB
WHERE S.USN = IA.USN AND
SS.SSID = IA.SSID AND
SUB.SUBCODE = IA.SUBCODE AND
SUB.SEM = 8;


E. Consider the schema for Company Database:
EMPLOYEE (SSN, Name, Address, Sex, Salary, SuperSSN, DNo)

DEPARTMENT (DNo, DName, MgrSSN, MgrStartDate)
DLOCATION (DNo,DLoc)
PROJECT (PNo, PName, PLocation, DNo)
WORKS_ON (SSN, PNo, Hours)
1. Make a list of all project numbers for projects that involve an employee whose last
name is ‘Scott’, either as a worker or as a manager of the department that controls
the project.
2. Show the resulting salaries if every employee working on the ‘IoT’ project is given a
10 percent raise.
3. Find the sum of the salaries of all employees of the ‘Accounts’ department, as well
as the maximum salary, the minimum salary, and the average salary in this
department
4. Retrieve the name of each employee who works on all the projects controlled by
department number 5 (use NOT EXISTS operator). For each department that has
more than five employees, retrieve the department number and the number of its
employees who are making more than Rs. 6,00,000.
SSN Controlled_by
Name N 1
DNO
Salary
DName
1 N
Employee Manages Department

Address
MgrStartDate
1
Sex 1
N
M Dlocation
Supervisee
Supervisor
Supervision Works_on Controls
N
Hours
Project PName
PNO PLocation

Schema Diagram
Employee
SSN Fname Lname Address Sex Salary SuperSSN DNO
Department
DNO Dname MgrSSN MgrStartDate
DLocation
DNO DLOC
Project
PNO PName PLocation DNO
Works_on
SSN PNO Hours
Table Creation
CREATE TABLE DEPARTMENT

(DNO VARCHAR2 (20) PRIMARY KEY,
DNAME VARCHAR2 (20),
MGRSTARTDATE DATE);
CREATE TABLE EMPLOYEE

(SSN VARCHAR2 (20) PRIMARY KEY,
FNAME VARCHAR2 (20),
LNAME VARCHAR2 (20),
ADDRESS VARCHAR2 (20),
SEX CHAR (1),
SALARY INTEGER,
SUPERSSN REFERENCES EMPLOYEE (SSN),
DNO REFERENCES DEPARTMENT (DNO));

NOTE: Once DEPARTMENT and EMPLOYEE tables are created we must alter department
table to add foreign constraint MGRSSN using sql command
ALTER TABLE DEPARTMENT

ADD MGRSSN REFERENCES EMPLOYEE (SSN);
CREATE TABLE DLOCATION

(DLOC VARCHAR2 (20),
DNO REFERENCES DEPARTMENT (DNO),
PRIMARY KEY (DNO, DLOC));
CREATE TABLE PROJECT

(PNO INTEGER PRIMARY KEY,
PNAME VARCHAR2 (20),
PLOCATION VARCHAR2 (20),
DNO REFERENCES DEPARTMENT (DNO));
CREATE TABLE WORKS_ON

(HOURS NUMBER (2),
SSN REFERENCES EMPLOYEE (SSN),
PNO REFERENCES PROJECT(PNO),
PRIMARY KEY (SSN, PNO));
Table Descriptions
DESC EMPLOYEE;

DESC DEPARTMENT;
DESC DLOCATION;
DESC PROJECT;
DESC WORKS_ON;
Insertion of values to tables
INSERT INTO EMPLOYEE (SSN, FNAME, LNAME, ADDRESS, SEX, SALARY) VALUES
(‘RNSECE01’,’JOHN’,’SCOTT’,’BANGALORE’,’M’, 450000);
(‘RNSCSE01’,’JAMES’,’SMITH’,’BANGALORE’,’M’, 500000);
(‘RNSCSE02’,’HEARN’,’BAKER’,’BANGALORE’,’M’, 700000);
(‘RNSCSE03’,’EDWARD’,’SCOTT’,’MYSORE’,’M’, 500000);
(‘RNSCSE04’,’PAVAN’,’HEGDE’,’MANGALORE’,’M’, 650000);
(‘RNSCSE05’,’GIRISH’,’MALYA’,’MYSORE’,’M’, 450000);

(‘RNSCSE06’,’NEHA’,’SN’,’BANGALORE’,’F’, 800000);
(‘RNSACC01’,’AHANA’,’K’,’MANGALORE’,’F’, 350000);
(‘RNSACC02’,’SANTHOSH’,’KUMAR’,’MANGALORE’,’M’, 300000);
(‘RNSISE01’,’VEENA’,’M’,’MYSORE’,’M’, 600000);
(‘RNSIT01’,’NAGESH’,’HR’,’BANGALORE’,’M’, 500000);
INSERT INTO DEPARTMENT VALUES (‘1’,’ACCOUNTS’,’01-JAN-01’,’RNSACC02’);

INSERT INTO DEPARTMENT VALUES (‘2’,’IT’,’01-AUG-16’,’RNSIT01’);
INSERT INTO DEPARTMENT VALUES (‘3’,’ECE’,’01-JUN-08’,’RNSECE01’);
INSERT INTO DEPARTMENT VALUES (‘4’,’ISE’,’01-AUG-15’,’RNSISE01’);
INSERT INTO DEPARTMENT VALUES (‘5’,’CSE’,’01-JUN-02’,’RNSCSE05’);
Note: update entries of employee table to fill missing fields SUPERSSN and DNO
UPDATE EMPLOYEE SET

SUPERSSN=NULL, DNO=’3’
WHERE SSN=’RNSECE01’;
UPDATE EMPLOYEE SET

SUPERSSN=’RNSCSE02’, DNO=’5’
WHERE SSN=’RNSCSE01’;
UPDATE EMPLOYEE SET

UPDATE EMPLOYEE SET

UPDATE EMPLOYEE SET

DNO=’5’, SUPERSSN=’RNSCSE05’

UPDATE EMPLOYEE SET

DNO=’5’, SUPERSSN=’RNSCSE06’
UPDATE EMPLOYEE SET

DNO=’5’, SUPERSSN=NULL
UPDATE EMPLOYEE SET

DNO=’1’, SUPERSSN=’RNSACC02’
WHERE SSN=’RNSACC01’;
UPDATE EMPLOYEE SET

WHERE SSN=’RNSACC02’;
UPDATE EMPLOYEE SET

WHERE SSN=’RNSISE01’;
UPDATE EMPLOYEE SET

WHERE SSN=’RNSIT01’;
INSERT INTO DLOCATION VALUES (’BANGALORE’, ‘1’);

INSERT INTO DLOCATION VALUES (’MANGALORE’, ‘4’);
INSERT INTO DLOCATION VALUES (’MANGALORE’, ‘5’);
INSERT INTO PROJECT VALUES (100,’IOT’,’BANGALORE’,’5’);

INSERT INTO PROJECT VALUES (101,’CLOUD’,’BANGALORE’,’5’);
INSERT INTO PROJECT VALUES (102,’BIGDATA’,’BANGALORE’,’5’);
INSERT INTO PROJECT VALUES (103,’SENSORS’,’BANGALORE’,’3’);
INSERT INTO PROJECT VALUES (104,’BANK MANAGEMENT’,’BANGALORE’,’1’);
INSERT INTO PROJECT VALUES (105,’SALARY MANAGEMENT’,’BANGALORE’,’1’);
INSERT INTO PROJECT VALUES (106,’OPENSTACK’,’BANGALORE’,’4’);
INSERT INTO PROJECT VALUES (107,’SMART CITY’,’BANGALORE’,’2’);

INSERT INTO WORKS_ON VALUES (4, ‘RNSCSE01’, 100);

INSERT INTO WORKS_ON VALUES (7, ‘RNSECE01’, 103);
INSERT INTO WORKS_ON VALUES (5, ‘RNSACC01’, 104);
INSERT INTO WORKS_ON VALUES (6, ‘RNSACC02’, 105);
INSERT INTO WORKS_ON VALUES (4, ‘RNSISE01’, 106);
INSERT INTO WORKS_ON VALUES (10, ‘RNSIT01’, 107);
SELECT * FROM EMPLOYEE;
SELECT * FROM DEPARTMENT;
SELECT * FROM DLOCATION;

SELECT * FROM PROJECT;
SELECT * FROM WORKS_ON;
Queries:
1. Make a list of all project numbers for projects that involve an employee whose last
name is ‘Scott’, either as a worker or as a manager of the department that controls the
project.
(SELECT DISTINCT P.PNO

FROM PROJECT P, DEPARTMENT D, EMPLOYEE E
WHERE E.DNO=D.DNO
AND D.MGRSSN=E.SSN
AND E.LNAME=’SCOTT’)
UNION
(SELECT DISTINCT P1.PNO
FROM PROJECT P1, WORKS_ON W, EMPLOYEE E1
WHERE P1.PNO=W.PNO
AND E1.SSN=W.SSN
AND E1.LNAME=’SCOTT’);

2. Show the resulting salaries if every employee working on the ‘IoT’ project is given a 10
percent raise.
SELECT E.FNAME, E.LNAME, 1.1*E.SALARY AS INCR_SAL

FROM EMPLOYEE E, WORKS_ON W, PROJECT P
WHERE E.SSN=W.SSN
AND W.PNO=P.PNO
AND P.PNAME=’IOT’;
3. Find the sum of the salaries of all employees of the ‘Accounts’ department, as well as
the maximum salary, the minimum salary, and the average salary in this department
SELECT SUM (E.SALARY), MAX (E.SALARY), MIN (E.SALARY), AVG

(E.SALARY)
FROM EMPLOYEE E, DEPARTMENT D
WHERE E.DNO=D.DNO
AND D.DNAME=’ACCOUNTS’;
4. Retrieve the name of each employee who works on all the projects Controlled by
department number 5 (use NOT EXISTS operator).
SELECT E.FNAME, E.LNAME

FROM EMPLOYEE E
WHERE NOT EXISTS((SELECT PNO
FROM PROJECT

WHERE DNO=’5’)
EXCEPT(SELECT PNO
FROM WORKS_ON
WHERE E.SSN=SSN));
Or
SELECT LNAME, FNAME, DNO
FROM EMPLOYEE
WHERE NOT EXISTS (SELECT *
FROM WORKS_ON B
WHERE (B.PNO IN(SELECT P.PNO
FROM PROJECT P
WHERE P.DNO=’5’)
AND
NOT EXISTS (SELECT *
FROM WORKS_ON C
WHERE C.SSN=SSN
AND C.PNO=B.PNO)));
5. For each department that has more than five employees, retrieve the department
number and the number of its employees who are making more than Rs. 6, 00,000.
SELECT D.DNO, COUNT (*)

FROM DEPARTMENT D, EMPLOYEE E
WHERE D.DNO=E.DNO
AND E.SALARY>600000
AND D.DNO IN (SELECT E1.DNO
FROM EMPLOYEE E1
GROUP BY E1.DNO
HAVING COUNT (*)>5)

GROUP BY D.DNO;

18csl58 Dbms Lab Manual 2022-23

Uploaded by

Copyright:

Available Formats

18csl58 Dbms Lab Manual 2022-23

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

18csl58 Dbms Lab Manual 2022-23

Uploaded by

Copyright:

Available Formats

RNS INSTITUTE OF TECHNOLOGY

Dr. Vishnuvardhan Road, Channasandra, Bengaluru - 560 098

Department of Information Science and Engineering

DBMS LABORATORY WITH MINI PROJECT MANUAL

Department of Information Science and Engineering

VISION of the College

MISSION of the College

To impart high quality education in Engineering, Technology and Management with a

VISION of the Department

MISSION of the Department

ISE Graduates within three-four years of graduation will have

PROGRAM OUTCOMES (POs)

Engineering Graduates will be able to:

• PO1: Engineering knowledge: Apply the knowledge of mathematics, science,

PROGRAM SPECIFIC OUTCOMES (PSOs)

ISE Graduates will have

• PSO3 – General Expertise and Higher Learning: Ability to exchange knowledge

Department of Information Science and Engineering

Understanding of Able to analyze the given Able to analyze the

Results and Program and results

Lab Internal Assessment Test Rubrics (Max: 10 marks)

Above Average Average Below Average

Mini-Project Assessment Rubrics (Max: 15 marks)

Able to answer all Able to answer 2 - 3 Answered partially or Not

2 Program 1: Design of ER Diagram and Schema Diagram. Create, Insert, Queries

3 Program 2: Design of ER Diagram and Schema Diagram. Create, Insert, Queries

4 Mini Project - Design of ER and Schema Diagram Presentation

5 Lab Test I: Program 1 and 2

6 Program 3: Design of ER Diagram and Schema Diagram. Create, Insert, Queries

7 Program 4: Design of ER Diagram and Schema Diagram. Create, Insert, Queries

8 Program 5: Design of ER Diagram and Schema Diagram. Create, Insert, Queries

11 Mini Project Integration and Testing / Verification & Validation

13 Lab Test II: All 5 programs

Pronounced as SEQUEL: Structured English QUERY Language

DATA DEFINITION, CONSTRAINTS, AND SCHEMA CHANGES

RNSIT, Bangalore Page 1

 Date and Time: DATE (YYYY-MM-DD) TIME( HH:MM:SS)

Ex: CREATE SCHEMA COMPANY AUTHORIZATION Jsmith;

RNSIT, Bangalore Page 2

FOREIGN KEY (MGRSSN) REFERENCES EMP(SSN));

Example: DROP TABLE DEPENDENT;

DROP A COLUMN (AN ATTRIBUTE)

 ALTER TABLE COMPANY.EMPLOYEE DROP ADDRESS CASCADE; All

RNSIT, Bangalore Page 3

 ALTER TABLE COMPANY.DEPARTMENT ALTER MGRSSN SET DEFAULT

BASIC QUERIES IN SQL

SIMPLE SQL QUERIES

RNSIT, Bangalore Page 4

WHERE FNAME='John' AND MINIT='B’ AND LNAME='Smith’

RNSIT, Bangalore Page 5

Example of a simple query on two relations

ALIASES, * AND DISTINCT, EMPTY WHERE-CLAUSE

RNSIT, Bangalore Page 6

Q3: SELECT E.FNAME, E.LNAME, S.FNAME, S.LNAME FROM EMPLOYEE E S

Q3: SELECT E.FNAME, E.LNAME, S.FNAME, S.LNAME FROM EMPLOYEE AS

RNSIT, Bangalore Page 7

Q1b: SELECT * FROM EMPLOYEE, DEPARTMENT WHERE DNAME='Research'

Q1c: SELECT SALARY FROM EMPLOYEE Q1d: SELECT DISTINCT

(SELECT PNAME FROM PROJECT, WORKS_ON, EMPLOYEE WHERE

RNSIT, Bangalore Page 8