Scribd Logo
Upload

Welcome to Scribd!

  • 204 views

    Distribution Panel Board Testing Checklist

    Uploaded by

    Sumit Saurabh
    The document is a checklist for testing and commissioning a control panel or distribution board. It lists various items to check, including verifying documentation and drawings are available, inspecting for damage, checking labeling and identification of live components, ensuring proper earthing, testing insulation resistance and voltage, and performing operational tests of circuit breakers, ELCBs, and RCCBs. The checklist is to be signed off by the technician, site in-charge, engineer, and electrical inspector.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Distribution Panel Board Testing Checklist

    Uploaded by

    Sumit Saurabh
    204 views2 pages
    The document is a checklist for testing and commissioning a control panel or distribution board. It lists various items to check, including verifying documentation and drawings are available, inspecting for damage, checking labeling and identification of live components, ensuring proper earthing, testing insulation resistance and voltage, and performing operational tests of circuit breakers, ELCBs, and RCCBs. The checklist is to be signed off by the technician, site in-charge, engineer, and electrical inspector.

    Original Title

    Distribution-Panel-Board-Testing-checklist

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document is a checklist for testing and commissioning a control panel or distribution board. It lists various items to check, including verifying documentation and drawings are available, inspecting for damage, checking labeling and identification of live components, ensuring proper earthing, testing insulation resistance and voltage, and performing operational tests of circuit breakers, ELCBs, and RCCBs. The checklist is to be signed off by the technician, site in-charge, engineer, and electrical inspector.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    204 views2 pages

    Distribution Panel Board Testing Checklist

    Uploaded by

    Sumit Saurabh
    The document is a checklist for testing and commissioning a control panel or distribution board. It lists various items to check, including verifying documentation and drawings are available, inspecting for damage, checking labeling and identification of live components, ensuring proper earthing, testing insulation resistance and voltage, and performing operational tests of circuit breakers, ELCBs, and RCCBs. The checklist is to be signed off by the technician, site in-charge, engineer, and electrical inspector.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    Distribution Panel Board Testing & Commissioning Checklist

    Report on Testing and Commissioning


    CONTROL PANEL / DISTRIBUTION BOARD

    Found Not
    S.No Description Activity N/A
    Satisfied Satisfied

    Drawing-SLD and DB Scheduling must be kept in


    1
    the DB Pocket. General/Document
    Verification
    2 Certificate of Calibration for Testing Equipment.

    3 There is no evident damage to compromise safety.


    Ensure that the testing & commissioning are
    4
    performed with approved MS and MAS.

    5 Appropriate Tagging & Labelling

    Screening all live components with an earthed metal


    6
    or an insulating plate.
    On the distribution board, phase identification is
    7
    provided.
    Visual Analysis
    8 Effective earthing of all exposed metal components.

    Effectively earthed are all metal conduits, switch


    9
    boxes, trunking, and exposed metal components.
    Steel conduit or trunking should be used to protect
    all wires that aren't armoured against damage. If
    10
    necessary, bushing and a rubber grommet are
    provided.
    The size of the conductor must correspond to the
    11
    MCB or FUSE that is protect the circuit.
    All metal conduit or trunking junctions must be
    12 structurally strong, electrically continuous, and
    corrosion-resistant.

    13 Effective earthing of all exposed conductors.

    14 Earthing of the panel door must be done.


    Check each connection's tightness, and clean each
    15
    supporting insulator.
    16 Tagging of the incoming DB cable must be done.

    17 Insulation resistance between the phases, neutral,


    and earth of at least 0.5 M ohm.
    18 Voltage monitoring on the O/G Power Circuit Testing &
    Commissioning
    19 Phase sequence checking
    On/Off & manual trip test checks for MCCB's &
    120
    MCB's
    21 Checking ELCB, RCCB, and RCD

    Report:
    1.
    2.
    3.
    4.
    5.

    Electrical
    Technician Site Incharge Engineer
    Inspector

    NAME

    SIGNATURE

    SEAL

    DATE

    You might also like