Proj-003 - Siddhitex - ELECTRICAL BOQ - Revised03 - NM

SCARION ELECTRICALS
ELECTRICAL ENGINEERS & CONTRACTORS

A/6/B/305, Lokhpuram, Pokh II, Majiwade, Thane - Maharashtra - 400607.
Email : [email protected] Mobile : +91 9967981263 / +91 9987741581
To,
Siddhi Industries Ltd Date - 02.01.2022
Survey No - 240, Behind Bhagyoday Hotel,
Sarkej - Bawla Highway, Changodar,
Ahmedabad - 382210
Kind Attn; Mr. Diganta Talukdar
SR NO DESCRIPTION TOTAL
1.0 HT SWITCHGEAR BREAKER PANEL RS. 150,000.00
2.0 TRANSFORMERS RS. 125,000.00
3.0 HT CABLES RS. 844,325.00
4.0 LIGHTNING ARRESTORS RS. 1,019,625.00
5.0 MV SWITCHGEAR & POWER PANELS RS. 261,955.00
6.0 MV CABLING RS. 16,324,084.00
7.0 DISTRIBUTION BOARD RS. 3,015,500.00
8.0 CONDUIT WIRING RS. 14,190,852.00
10.0 UPS RS. 157,000.00
11.0 LIGHT FIXTURES RS. 412,250.00
12.0 EARTHING RS. 6,106,740.00
SUB TOTAL RS. 42,607,331.00
GST @ 18% 7,669,319.58
GRAND TOTAL 50,276,650.58
IN WORD; FIVE CRORE TWO LAKH SEVENTY SIX THOUSAND SIX HUNDRED & FIFTY ONLY.
For SCARION ELECTRICALS

(auth. Sign)
SCARION ELECTRICALS
CLIENT: M/S. Siddhi Knitfab Pvt Ltd

PROJECT NO. Proj -003
DATE 24/08/2021
REVISION R2
BILL OF QUANTITIES FOR ELECTRICAL WORKS
Pay
Item No. Description Qty.
Unit
1.0 HT SWITCHGEAR BREAKER PANEL
1 # 800 A, 11KV, HT Breaker & 3 # 800 A, 11KV, HT breaker

1.1 panel vacuum circuit breaker for incomer and outgoing complete 1
as per specification and equipment data sheet.
(1 Incommer + 3 outgoing feeder)
i), loading & unloading positioning at site.
ii)Installing, testing & commi-ssioning generally as speci-fied and

shown on drawings.
iii)Inspection of the above by Electricity Supply Board and getting

the approval at site of installation.
iv) Termination of incoming/outgoing cables as required and or

as specified including the necessary Bus Bar extension
chambers etc.,
v) with all required supports/frames, if necessory
vi) with required short circuit rating re-engineered as per

requirement but not less than shown in the dwg.
(Refer Main SLD SL-147-EL0-500. for details along with

technical specification)
Engineering Services Charges for preparing site plan, getting
approval from local authorities, Electrical Inspector, CEIG
Inspector, safety certificate, submission of test report, completion
1.2 Lumsum
certificate to UGVCLL and making 'As Built' drawings etc. Work
also includes approval of 11 kV SLD from EB & Electrical
inspector as per the requirment.
TOTAL FOR HT SWITCHGEAR THREE BREAKER PANEL

(auth. Sign)
ECTRICALS
S & CONTRACTORS
de, Thane - Maharashtra - 400607.
e : +91 9967981263 / +91 9987741581
LECTRICAL WORKS
Rate
Total Amount
Mat lab Total
- 60,000.00 60,000.00 60,000.00
- 90,000.00 90,000.00 90,000.00
150,000.00
SCARION ELECTRICAL

DATE 24/08/2021
REVISION R2
Pay
Unit
2 TRANSFORMERS:-
2.1 11KV/0.433 KV Step Down Transformer

Dyn11, indoor, Oil Cooled Type,
with On Load Tap Changer transformers complete
as per equipment data sheet and
including the following and not limited to for
( Refer technical specification for details)
I)'Supply, loading & unloading to the location
at site of installation.
ii)'Installing, testing & commissioning generally as speci-

specified and shown on drawings.
iii) Termination of incoming/outgoing cables

or bus ducts as required and or as specified
including the necessary cu Bus Bar extension
chambers,adopter box etc.,
iv) Required Foundation for Mounting Transformers

(Trench by client as per vendor dwg.)
v) Required Soak Pit as per IS. (Civil work by client)
vi)Inspection of the above by Electricity Supply Board and

getting the approval at site of installation.
vii) with all required structural supports/frames.
viii) with all required Exhaust/SA fans as per requirement
ix) Copper Tinned Bus Bars
x) BMS Compatibility with all necessary potential free contacts.

2.1.1 Each 1600 KVA Oil cooled Type Transformer 2
2.1.2 Each Filteration of Transformer of oil if required (Aprrox. 2500 ltrs) RO

2.2 LT BUS-DUCT for Transfromer
Supply Installation & testing ,commissioning of TPN Air insulated

AL Bus duct 2500 Amps, S.C. rating 65 kA for 1 sec
From 1600 KVA Transformer- to Main I/C ACB
Consist of vertical Riser, 2 No L Bends, horizontal length, joint
Each pieces & Flexible Cu. Busbars at both Ends. Bimetallic joint (total 2
horizontal length Approx 4 mtrs indoor type + 2 Nos L bends
Complete with all required accessories.1 set, Pl give detail qty
& rate considered by you)
(Give rate in terms of running meter) as per drawing
Refer SL-147-LT PANEL SPEC& BUSDUCT for details )

Total for 2.0
(auth. Sign)
ECTRICALS
S & CONTRACTORS
de, Thane - Maharashtra - 400607.
e : +91 9967981263 / +91 9987741581
LECTRICAL WORKS
Rate
Total Amount
Mat lab Total
- 42,500.00 42,500.00 85,000.00
- 45,000.00 45,000.00 -
- 20,000.00 20,000.00 40,000.00
125,000.00
SCARION ELECTRICAL

PROJECT
Proj -003
NO.
DATE 24/08/2021
REVISION R2
Pay
Item No. Description Qty. SUPPLY
Unit
3 SUBSTATION AUXILIARIES
3.1 Supply, laying & testing of
11KV 3C XLPE (E ) armoured aluminium cables

including all accessories, supports, clamps, structural
angles etc., as required and as specifed in complete,
3.1.1 m 3C 300 Sqmm RO 2,236.00
3.1.2 m 3C 240 Sqmm 100 1,652.00
3.1.3 m 3C 185 Sqmm 50 1,372.00
3.1.4 m 3C 150 Sqmm R.O. 1,302.00
3.1.5 m 3C 120 sqmm R.O. 1,158.00
3.2 Making HT Indoor type cable end terminations KIT

with glands, lugs, compound
etc. as specified for the above XLPE cables,
3.2.1 Set 3C 300 Sqmm RO 14,500.00
3.2.2 Set 3C 240 Sqmm 2 11,550.00
3.2.3 Set 3C 185 Sqmm 12 10,350.00
3.2.4 Set 3C 150 Sqmm R.O. 11,500.00
3.2.5 Set 3C 120 sqmm R.O. 11,500.00

3.3 Supply, laying, testing of 1100V
grade 1.5 sqmm multi stranded copper con-
ductor, PVC insulated, shea-
thed and armoured multicore
cables for various control requi-
rements including GI spacers,
saddles for supports end
terminations with cable gland
etc. complete as specified.
3.3.1 m 4C 1.5 YRY 200 106.00
3.3.2 m 3C 1.5 YRY 150 86.00
3.3.3 m 2C 1.5 YRY 150 70.00
Supply, installation, testing & commissioning of 110

Volts DC-100 AH at 10 HRS discharge rate.Self
contained floor mounted sheet steel cabinet with two
tiers for housing the batteries. The charging. equipment
will be operated from 400V 3 ph, 50 c/s supply. The
cabinet should be complete and internally wired. The
charger unit should house, resistance control DC
ammeter, Voltmeter and fuses, AC supply failure alarm.
Complete accessories required for commissioning is
3.4 set 1 115,000.00
included in the scope of work. D.C. distribution board
comprising of 100 Amps DP switch as incomer and
2x16A DP +2x32A DPswitches as O/G Battery Charger
with batteries Automatic Float cum Boost charger of 32
A to give 110 V DC output at 100 Ah capacity with SMF
batteries each of 2V/100Ah Above complete with testing
& Commissioning. Complete with MS channel base
frame and all neccessary required hardware,
consumables etc.
Supply & Installation of the following items as specified,

3.5
required and as given below
3.5.1 Each 11 KV Grade grade rubber mat (2mtr x 1 mtr) 15 3,000.00
3.5.2 Each 1.1 KV Grade grade rubber mat (2mtr x 1 mtr) 50 2,082.00
3.5.3 Pair HT Hand gloves rated for 11 kV operation 4 1,080.00
Danger Board, Chart for Artificial respiration / Shock

3.5.4 Each 2 550.00
treatment, First Aid Box.
Floor mounting stand for keeping 2 nos. FIRE buckets,
750mm in length, 900mm in height, frame made out of
3.5.5 Each 30x30x4 mm angle iron with cross supports for legs, 2 1,320.00
welded with 2 hooks and duly painted with one coat of
red oxide and two coats of silver paint.
3.5.6 Each CO2 Cylinder 4 litres 4 3,800.00
D.C.P. type fire extinguisher 10 kg capacity cartridge

type with gun metal cap 150 grams CO2 gas cartridge
powder and brackets conforming to IS 2171 –85 and
3.5.7 Each 2 3,000.00
complete erected with necessary clamps made from
50x6mm MS flat with nuts & bolts grouted in wall
complete.
3.5.8 Each Discharge Rod for 11KV 1 3,600.00
Total for 3.0
(auth. Sign)
TRICALS
NTRACTORS
- Maharashtra - 400607.
67981263 / +91 9987741581
RATE - RS.
INSTALLATION TOTAL RATE TOTAL AMOUNT
250.00 2,486.00 -
150.00 1,802.00 180,200.00
125.00 1,497.00 74,850.00
125.00 1,427.00 -
125.00 1,283.00 -
3,500.00 18,000.00 -
2,500.00 14,050.00 28,100.00
2,500.00 12,850.00 154,200.00
2,500.00 14,000.00 -
2,500.00 14,000.00 -
35.00 141.00 28,200.00
35.00 121.00 18,150.00
35.00 105.00 15,750.00
15,000.00 130,000.00 130,000.00
405.00 3,405.00 51,075.00
405.00 2,487.00 124,350.00
315.00 1,395.00 5,580.00
225.00 775.00 1,550.00

315.00 1,635.00 3,270.00
500.00 4,300.00 17,200.00
500.00 3,500.00 7,000.00
1,250.00 4,850.00 4,850.00
844,325.00
SCARION ELECTRIC
ELECTRICAL ENGINEERS & CONTRACTOR
A/6/B/305, Lokhpuram, Pokh II, Majiwade, Thane - Maharashtra - 4

PROJECT
Proj -003
NO.
DATE 24/08/2021
REVISION R2
Pay
Item No. Description
Unit
4 LIGHTNING PROTECTION SYSTEM
4.1 Set ESE Air Terminal
Supply of ESE Lightning Arrester Prevectron ❸ ,Controlled Early Streamer Emission

Air terminal (CESEAT). Air Terminal should be UL-Listed and the manufacturer to
support with the UL-certification. Air Terminal must be CE-marked for compliance to
NF EN 611000-6-2 / NF EN 611000-6-3.
The air Terminal should have been tetsed in a high voltage laboratory to withstand
200kA. The manufacturer shall also comply for full certification as provided in the new
test guidelines in 'Annex C' of the revised NFC 17 102 version 2011,ESE lightning
protection system.To be supported with an Independent third party certification by the
manufacturer. Annex 'C' calls for the following tests and due certification required
from the ESE -manufacturer for: Marking Tests l Mechanical Tests l Environmental
Tests l Electrical Tests l ΔT Tests l EMC Tests. The air terminal must also meet the
standard variations ơESEAT NF C 17 102 – 2011"C.3.5.2.4 Unit shall be equipped
with a central pick up rod made of nickel-plated copper ensuring full electrical
continuity and having a conductive cross-sectional area larger than 120sq.mm. The
device to be a fully autonomous system requiring no external power supply. The
device shall ensure a controlled ionisation process and react at the exact precise
moment when the risk of ligtning discharge is imminent.
The air terminal shall be designed to ensure its maintenance during its lifetime:
testing feature and modular design enabling to repair/replace defective
components.The air terminal should be sustainably designed to mitigate its
environmental impact.
Indelec Model No - Prevectron ❸S 60
4.2 Set Elevated Mast / Mounting Structure

Elevation pole made of Class 'B' GI- material having ISI-marking,with a dia of 35mm
to 50mm with a thread at the top to fix the unit. Base plate, mounting bracket, clamps
and all required fixing accessories should also be supplied. (5 Meter)
4.3 Set Performance Recording Equipment

Supply of INDELEC Lightning Flash Counter. Electronically controlled, register every
strike between 1000 A to 100 KA for a 8/20 microsecond peak current. Tested in
High Voltage Laboratory (CPRI). Reports available on request.Digital -2
4.4 Mtr. Down Conductor

Supply of Down conductor made of Copper cable. It should have a minimum cross
sectional area of 70mm² to withstand 250kA lightning current and comply with IEC
62305 standard. Cable shall necessarily have 19-strands across the 70sqmm cross-
section, with each strand dia of min 2.1mm
4.5 Set Test Link

A test clamp should be installed in order to disconnect the down conductor from the
earth termination for regular checks of the earth termination resistance value.
4.6 Maintenance Free Earthing Electrode
Dia 17.2mm & 3-metre, Earth Electrode shall be Copper coated Solid Steel Rod
made of high tensile low carbon steel rod. Rod shall be molecularly bonded with
99.9% purity Electrolytic copper with minimum thickness of 250microns. A Coupler /
Connecting Clamp made of Brass or any other Copper alloy shall be used for
interconnection, which is resistant to corrosion..Earth Enhancing Conductive
Compound should be added to replace the excavated soil, It absorbs the surrounding
moisture and ensures dissipation of any lightning / fault current, retain the moisture
and provide a stable environment for the earthing system. (Minimum 40Kg for a
Maintenance Free earthing electrode). This material shall be chemically inert to sub
soil and shall not pollute the environment. It should havea resistivity less than 0.12
ohm metre. Entire Earthing System should be CPRI tested and manufacturer shall
provide proof of certification.
4.7 Set Earth Pit Chamber for Inspection

All connections should be housed in a High Grade PVC Inspection House pit for easy
maintenance.
Total
(auth. Sign)
ECTRICALS
ERS & CONTRACTORS
wade, Thane - Maharashtra - 400607.
bile : +91 9967981263 / +91 9987741581
R ELECTRICAL WORKS
Rate
Qty. Total Amount
Mat lab Total
2 140,800.00 9,000.00 149,800.00 299,600.00
1 9,800.00 2,125.00 11,925.00 11,925.00
2 13,300.00 1,700.00 15,000.00 30,000.00

800 698.00 78.00 776.00 620,800.00
4 1,745.00 220.00 1,965.00 7,860.00
4 4,590.00 3,200.00 7,790.00 31,160.00
4 3,570.00 1,000.00 4,570.00 18,280.00
1,019,625.00
SCARION ELECTRICAL

PROJECT
Proj -003
NO.
DATE 24/08/2021
REVISION R2
Project Name Siddhi Knitfab, Process House
Pay
Unit
5.0 MV SWITCHGEAR & POWER PANELS
5.1 Supply, installation, testing and

commissioning of cubicle type panels
as specified in the technical specification,boq description and
shown on drawing.
i) Main Aluminium busbars with bar

type feeder connections & all
internal wiring (with FRLS wires) and connections.
ii) Earthing all components,frame

etc. to a common internal earth bar.
iii) Painting all sheet metal works.
iv) All accessories & supporting structure,base etc.,
v) Brass glands and crimping lugs

for sending and receiving ends.
vi) All ammeters with C.T's and

voltmeter and energy meters
with necessary fuses.
vii) All Load Managers to have

parameters like KW, KVA, A, V,
PF,KVAR, Active & Reactive
component of power, RS 485 port
to have BMS compatibility as required & desired to complete
the system.
vii) Panel components as specified
and as required. MS base frame with finish as per specification.
viii) MS base frame.
ix)All switch gear to have short circuit

levels as specified as minimum (for MCB, consider fuse back
up etc.,).
x) All the ATS shall be with over lapping neutral and inbuilt bypass
facility if required
xi) For all the panels with electrical & mechanical interlocking
between the breakers, the interlocked breakers shall be 4P,EDO
type even if not specified in the drawing.
xii) All the indoor panels shall be designed for IP-52 unless
otherwise specified & all the outdoor panels shall be with IP-55
(Refer Main SLD and SDL for power distribution for feeder
details along with the technical specification, SL-147-LT
PANEL SPEC& BUSDUCT)
Main LT Panel - as required, specified and shown on drg. No. SL-
5.1.1 Each 1
147-EL0-500.
Hybrid APFC Panels FOR 300kvar hybrid filter( 200A active+

5.1.2 Each 100kvar passive) as per detail specification ( Refer separate 2
specification for hybrid APFC )
5.1.3 Each APFC Panels FOR 215 KVAr capacitors with 7 % reactors 2
5.1.4 Each APFC Panels FOR 250 KVAr capacitors with 7 % reactors 0
5.1.5 Each APFC Panels FOR 160 KVAr capacitors with 7% reactors 0
5.1.6 Each APFC Panels FOR 100KVAr capacitors with 7% reactors 0
Main LT PANEL1( MLTP1) -in PROCESS HOUSE as per SLD

5.1.7 Each rating of 35 kA for 1 sec.(TOP Bus CABLE entry & TOP outgoing 1
(Drawing No. SL147-ELE-501
Main LT PANEL1( MLTP2) -in PROCESS HOUSE as per SLD
5.1.8 Each rating of 35 kA for 1 sec.(TOP Bus CABLE entry & TOP outgoing 1
(Drawing No. SL147-ELE-501
5.1.9 Each PDB1 ( Refer SLD SL147-EL-501) 1
5.1.14 Each PDB (UTILITY) ( Refer SLD SL147-EL-501) 1
5.1.15 Each MLDB1 & MLDB2 ( Refer SLD SL147-EL-501) 1
5.1.16 Each COMPRESSOR PDB ( Refer SLD SL147-EL-501) 1
5.1.17 Each FIRE FIGHTING PANEL ( Refer SLD SL147-EL-501) 1
5.1.18 Each DG AMF PANEL ( Refer SLD SL147-EL-500) 1
Supply, Installation, Testing & Commissioning of Adapter

box/Junction box near M/c panel to accommodate Aluminum
cables & Copper cables, with incoming & outgoing cable end
5.2
boxes. 2mm thick CRCA sheet metal enclosure & Operating
handle, painted Supporting steel, angles etc. Complete with
required necessary hardware and consumables.
5.2.1 Each Junction box with 800 A MCCB with microprocessor release 1
5.2.2 Each Junction box with 630 A MCCB with microprocessor release 1
5.2.3 Each Junction box with 400A MCCB with thermal magnetic release 1
63A, FP ELMCCB 300mA in Powder coated M.S Enclosure (IP-

5.2.6 Each 1
42) FOR LIFTS
5.2.7 Each 63A, FP, MCCB isolator 1
5.2.8 Each 63A, TP+2N, MCCB isolator 1
5.2.9 Each 40A, FP, MCCB isolator 1
5.2.10 Each 40A, TP+2N, MCCB isolator 1
5.2.11 Each 40A, FP, MCB isolator 1
5.2.12 Each 40A, DP, MCB isolator 1
Supply, Installation, Testing & Commissioning of 1#5KVA, 3-Ph

Incoming & 1-Ph Outgoing, Inverter with 15 Min Battery Back-Up
complete with the required accessories as specified including the
5.3 Each cost of the battery, the interconnecting flexible cables/wires 1
between the inverter and battery racks and within the battery
racks and all the other necessary accessories required to
complete the job.
Supply, Installation, Testing & Commissioning of 1#7.5KVA, 3-Ph
Incoming & 1-Ph Outgoing, Inverter with 15 Min Battery Back-Up
complete with the required accessories as specified including the
5.4 Each cost of the battery, the interconnecting flexible cables/wires 1
between the inverter and battery racks and within the battery
racks and all the other necessary accessories required to
complete the job.
Total
(auth. Sign)
ECTRICALS
RS & CONTRACTORS
ade, Thane - Maharashtra - 400607.
ile : +91 9967981263 / +91 9987741581
ELECTRICAL WORKS
Rate
Total Amount
Mat lab Total
- 30,000.00 30,000.00 30,000.00
- 20,000.00 20,000.00 40,000.00
- 10,000.00 10,000.00 20,000.00
- 10,000.00 10,000.00 -
- 10,000.00 10,000.00 -
- 10,000.00 10,000.00 -
- 20,000.00 20,000.00 20,000.00
- 20,000.00 20,000.00 20,000.00
- 10,000.00 10,000.00 10,000.00

- 10,000.00 10,000.00 10,000.00
- 10,000.00 10,000.00 10,000.00
- 10,000.00 10,000.00 10,000.00
- 10,000.00 10,000.00 10,000.00
- 10,000.00 10,000.00 10,000.00
- 10,000.00 10,000.00 10,000.00
- 10,000.00 10,000.00 10,000.00
- 10,000.00 10,000.00 10,000.00
- 10,000.00 10,000.00 10,000.00
- 2,500.00 2,500.00 2,500.00
- 2,500.00 2,500.00 2,500.00
- 1,500.00 1,500.00 1,500.00
- 1,200.00 1,200.00 1,200.00
- 650.00 650.00 650.00
5,560.00 350.00 5,910.00 5,910.00
- 750.00 750.00 750.00
- 750.00 750.00 750.00
- 750.00 750.00 750.00
- 750.00 750.00 750.00
2,490.00 350.00 2,840.00 2,840.00
1,505.00 350.00 1,855.00 1,855.00
- 5,000.00 5,000.00 5,000.00

- 5,000.00 5,000.00 5,000.00
261,955.00
SCARION ELECTRICALS

PROJECT
Proj -003
NO.
DATE 24/08/2021
REVISION R2
Pay
Unit
6.0 MV CABLING
6.1 Power Cabling (XLPE / PVC)

Supply and laying heavy duty
1100V grade XLPE/ PVC insulated
sheathed & armoured FRLS
cables indoor/outdor with
Al/Cu conductors only as speci-
fied and shown on drgs.
complete with:
a) Cable clamps on walls,
columns, beams, built-up
trenches, cable markers
etc. for indoor cables.
b) Covering bricks or tiles,
cable markers etc for
outdoor cables.
c) Earthing the glands
armouring etc.
Aluminium cables
(XLPE cables)
9.1.1 Mtr. 3.5 C 300 sq.mm. 2000
9.1.2 Mtr. 3 C 300 sq.mm. 200
9.1.3 Mtr. 3.5 C 240 sq.mm. 1730
9.1.4 Mtr. 3.5 C 185 sq.mm. 1600
9.1.5 Mtr. 3.5 C 150 sq.mm. 100

9.1.6 Mtr. 3.5 C 120 sq.mm. 600
9.1.7 Mtr. 3.5 C 95 sq.mm. 450
9.1.8 Mtr. 3.5 C 70 sq.mm. 480
9.1.9 Mtr. 3.5 C 50 sq.mm. 1857
9.1.10 Mtr. 4 C 50 sq.mm. 100
9.1.11 Mtr. 3.5 C 35 sq.mm. 300
9.1.12 Mtr. 3.5 C 25 sq.mm. 500
9.1.13 Mtr. 4 C 25 sq.mm. R.O.
9.1.14 Mtr. 3 C 25 sq.mm. R.O.
9.1.15 Mtr. 4 C 16 sq.mm. 500
9.1.16 Mtr. 3 C 16 sq.mm. R.O
- do - but for copper XLPE cables
9.1.17 Mtr. 4 C 10 sq.mm. 765
9.1.18 Mtr. 4 C 6 sq.mm. 460
9.1.19 Mtr. 4 C 4 sq.mm. 640
9.1.20 Mtr. 4 C 2.5 sq.mm. 950
9.1.21 Mtr. 3 C 10 sq.mm. 250
9.1.22 Mtr. 3 C 6 sq.mm. 450
9.1.23 Mtr. 3 C 4 sq.mm. 800
9.1.24 Mtr. 3 C 2.5 sq.mm. R.O.
9.1.25 Mtr. 1 C x 150 Sq.mm. Cu Flexible Cable. 500
9.1.26 Mtr. 1 C x 50 Sq.mm. Cu Flexible Cable. R.O.
9.1.27 Mtr. 1 C x 25 Sq.mm. Cu Flexible 250

( Length are subjected to change +/- 15%. Bidder to verify actual length
before placing the order after conatract finalization)
Total for 9.1
9.2 Control Cables

Supply and laying and termination of
11000 PVC insulated shea-
thed and screened Fire
Retarded Low Smoke (FRLS)
control cables with copper
conductors generally as spe-
cified and shown on drgs.
and same as for power cables.
9.2.1 Mtr. 2 C 1.5 smm 300
9.2.2 Mtr. 3 C 2.5 smm 100
9.2.3 Mtr. 4 C 2.5 smm 50
9.2.4 Mtr. 8 C 1.5 smm 200
9.2.5 Mtr. 12 C 1.5 smm 200
9.2.6 Mtr. 20 C 1.5 smm 200
9.2.7 Mtr. 40 C 1.5 smm 50
Total for 9.2
9.3 Cable Termination

Making cable end terminations
including brass double compression
glands and crimping type
Alluminium/copper lugs for cable sizes
mentioned below of Alluminium/copper.
9.3.1 Each 3.5c x 300 All 50
9.3.1 Each 3c x 300 All 10
9.3.2 Each 3.5c x 240 All 4
9.3.3 Each 3.5c x 185 All 4
9.3.4 Each 3.5c x 150 All 2
9.3.5 Each 3.5c x 120 All 4

9.3.6 Each 3.5c x 95 All 4
9.3.7 Each 3.5c x 70 Cu 6
9.3.8 Each 3.5c x 50 Cu 8
9.3.8 Each 4c x 50 Cu 8
9.3.9 Each 4c x 35 Cu 6
9.3.10 Each 3.5c x 25 Cu 50
9.3.10 Each 4c x 25 Cu 38
9.3.10 Each 3c x 25 Cu 12
`
9.3.11 Each 4c x 16 Cu R.O.
9.3.12 Each 4c x 10 Cu 40
9.3.13 Each 4c x 6 Cu 36
9.3.14 Each 4cx 4 Cu 32
9.3.15 Each 4cx 2.5 Cu R.O.
9.3.16 Each 3c x 10 Cu 20
9.3.17 Each 3c x 6 Cu 30
9.3.18 Each 3cx 4 Cu 20
9.3.19 Each 3cx 2.5 Cu 30
9.3.20 Each 1 C x 150 Sq.mm. Cu Flexible Cable. 40
9.3.20 Each 1 C x 50 Sq.mm. Cu Flexible Cable. 20
9.3.21 Each 1 C x 25 Sq.mm. Cu Flexible 10
Total for 9.3
9.4 Cable Trays

Supply & installation of Powder coated Ladder type M.S. cable Tray with
9.4.1 necessary supporing frame, members, angles, structural steel, clamps etc.
cables as specified & shown on drawing.
9.4.1.1 Mtr. 1500 mm wide Cable Tray horizontal / vertical tier. 10
9.4.1.3 Mtr. 1000 mm wide Cable Tray horizontal / vertical tier. R.O.
Supply & installation of Powder coated Perforated type hotdip GI cable

9.4.2 Tray with necessary supporing frame, members, angles, structural steel,
clamps etc. cables as specified & shown on drawing.
9.4.2.1
Mtr. 600 mm wide Cable Tray horizontal / vertical tier. 100
Supply & installation of cable tray Support wire From purlin (Gripple
9.4.4
make hangers SIZE No. As suitable for required Wt(kg)/ Mtr.
9.4.4.1 Mtr. SIZE No-2-GHF No2-Length 10 Mtrs with both side lock Loop Wire. 0
9.4.4.2 Mtr. SIZE No-3-GHF No3-Length 10 Mtr with both side lock Loop Wire. 0
9.4.4.3 Mtr. SIZE FNo-4-GHF NO 4 LOOP WIRE 8 MTR with both side lock Loop Wire. 0
9.4.4.4 Each GHFNO3ADJY-GHF NO 3 ADJ Y FIT 450 MM LEG 0
9.4.4.5 Each M8EYE-M8 EYEBOLT WITH NUT & WASHER 0
9.4.4.6 Each M10EYE-M10 EYEBOLT WITH NUT & WASHER 0
9.4.4.7 Each GHFN02SL-GHF NO 2 SLEEVE 0
Supplying and laying of RCC Hume pipes/ HDPE pipes under ground in
soft/hard murrum with all required RCC blocks/supports, encasing etc., as
9.5
per specification and as required. (This per running meter cost should also
include the necesssary excavation, laying in position and back filling etc.)
9.5.1 mtr 300mm. Dia RCC Hume Pipe 100
9.5.2 mtr 200mm. Dia RCC Hume Pipe 1600
9.5.3 mtr 100mm. Dia HDPE Pipe 100
Supply, Installation, Testing & Commissioning cable trenches under ground

in soft/hard murrum with all required RCC blocks/supports, encasing etc.,
9.6
as per specification for good to pull external lighting cable through it as
required.
9.6.1 Mtr. 1200(w) x 1600(d) mm wide cable trench RO
9.6.1 Mtr. 1000(w) x 1600(d) mm wide cable trench RO
9.7 Manholes
Constucting brick masonry manhole with F.P. S brick of class designation

75 in cement mortar 1:4 ( 1 cement: 4 coarse sand) R.C.C top slab with 1:2:
4 mix ( 1 cement : 2 coarse sand: 4 graded stone aggregrate 20 mm
nominal size) foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8
graded stone aggregrate 40 mm nominal size ) inside plastering 12 mm
thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with
floating coat of neat cement complete.
Inside size 1.50m LengthX 1.50m width and 1.600 m deep including C.I
9.7.1 Each 1
cover with frame.
Inside size 1.00m LengthX 1.00m width and 1.600 m deep including C.I
9.7.2 Each 10
cover with frame.
Inside size 0.75m LengthX 0.75 m width and 0.75m deep including C.I
9.7.2 Each 10
cover with frame.
Total

(auth. Sign)
TRICALS
ONTRACTORS
ne - Maharashtra - 400607.
967981263 / +91 9987741581
CAL WORKS
Rate
Total Amount
Mat lab Total
1,252.00 125.00 1,377.00 2,754,000.00
1,116.00 125.00 1,241.00 248,200.00
1,042.00 125.00 1,167.00 2,018,910.00
822.00 110.00 932.00 1,491,200.00
662.00 110.00 772.00 77,200.00

568.00 90.00 658.00 394,800.00
454.00 90.00 544.00 244,800.00
356.00 70.00 426.00 204,480.00
262.00 70.00 332.00 616,524.00
292.00 70.00 362.00 36,200.00
202.00 40.00 242.00 72,600.00
166.00 30.00 196.00 98,000.00
196.00 30.00 226.00 -
158.00 30.00 188.00 -
132.00 30.00 162.00 81,000.00
122.00 30.00 152.00 -
456.00 30.00 486.00 371,790.00
294.00 30.00 324.00 149,040.00
208.00 30.00 238.00 152,320.00
146.00 30.00 176.00 167,200.00
366.00 30.00 396.00 99,000.00
224.00 30.00 254.00 114,300.00
163.00 30.00 193.00 154,400.00
128.00 30.00 158.00 -
1,478.00 40.00 1,518.00 759,000.00
522.00 30.00 552.00 -
242.00 20.00 262.00 65,500.00
152.00 20.00 172.00 206,400.00
96.00 20.00 116.00 58,000.00
56.00 10.00 66.00 16,500.00

72.00 30.00 102.00 30,600.00
118.00 30.00 148.00 14,800.00
148.00 30.00 178.00 8,900.00
182.00 30.00 212.00 42,400.00
244.00 30.00 274.00 54,800.00
454.00 30.00 484.00 96,800.00
820.00 30.00 850.00 42,500.00
2,050.00 350.00 2,400.00 120,000.00
2,050.00 350.00 2,400.00 24,000.00
2,050.00 350.00 2,400.00 9,600.00
2,050.00 350.00 2,400.00 9,600.00
1,450.00 250.00 1,700.00 3,400.00
1,450.00 250.00 1,700.00 6,800.00

1,250.00 180.00 1,430.00 5,720.00
1,250.00 180.00 1,430.00 8,580.00
1,050.00 180.00 1,230.00 9,840.00
1,050.00 180.00 1,230.00 9,840.00
750.00 180.00 930.00 5,580.00
625.00 110.00 735.00 36,750.00
625.00 110.00 735.00 27,930.00
625.00 110.00 735.00 8,820.00
625.00 110.00 735.00 -
625.00 110.00 735.00 29,400.00
550.00 90.00 640.00 23,040.00
550.00 90.00 640.00 20,480.00
350.00 90.00 440.00 -
625.00 110.00 735.00 14,700.00
550.00 90.00 640.00 19,200.00
550.00 90.00 640.00 12,800.00
250.00 50.00 300.00 9,000.00
250.00 110.00 360.00 14,400.00
150.00 50.00 200.00 4,000.00
75.00 20.00 95.00 950.00
75.00 20.00 95.00 4,750.00
75.00 20.00 95.00 2,850.00
30.00 10.00 40.00 800.00

2,052.00 325.00 2,377.00 23,770.00
1,644.00 325.00 1,969.00 1,575,200.00
1,110.00 325.00 1,435.00 -
986.00 150.00 1,136.00 1,022,400.00
868.00 150.00 1,018.00 101,800.00
792.00 150.00 942.00 94,200.00
712.00 125.00 837.00 83,700.00
1,102.00 180.00 1,282.00 128,200.00
868.00 125.00 993.00 198,600.00
636.00 125.00 761.00 76,100.00
478.00 110.00 588.00 294,000.00
322.00 90.00 412.00 20,600.00
234.00 90.00 324.00 9,720.00
615.00 180.00 795.00 -

830.00 180.00 1,010.00 -
1,210.00 450.00 1,660.00 -
140.00 50.00 190.00 -
40.00 15.00 55.00 -
55.00 15.00 70.00 -
20.00 10.00 30.00 -
30.00 10.00 40.00 -
50.00 15.00 65.00 -
650.00 225.00 875.00 87,500.00
480.00 150.00 630.00 1,008,000.00
345.00 125.00 470.00 47,000.00
12,500.00 4,500.00 17,000.00 -
10,200.00 4,500.00 14,700.00 -
8,800.00 3,000.00 11,800.00 11,800.00
5,800.00 3,000.00 8,800.00 88,000.00
4,850.00 2,000.00 6,850.00 68,500.00
16,324,084.00
SCARION ELECTRICALS

PROJECT
Proj -003
NO.
DATE 24/08/2021
REVISION R2
Rate
Item No. Pay Unit Description Qty.
Mat Lab
7.0 DISTRIBUTION BOARDS
Supply, installation, testing & commissioning of 500V

Distribution Boards as specified & shown on drawing with:
(leagrand make/ as per approved make list)
i) Copper busbars together with tapped neutral bar
for individual phases.
ii) Copper earth strip with tapping for EEC.
iii) Busbar mounting mcb's individually lockable in off position.
iv) Interconnections and earthing.
v) Sheet steel enclosure suitable for recessed or surface
mounting
with hinged lockable doors interlocked with the incomer switch.
vi) Phase to phase barriers in case of 3Ph boards.
vii) Necessary support frame & painting, labelling, phase
indicating lamps with fuses etc. complete.
viii) Weatherproof Enclosure suitable for outdoor mounting. (IP-
55)
(for all external and street lighting DBs)
ix) Foundation required as per the specifications (for street
lighting DBs)
x) 1 # Timer & 1 # Daylight Sensor with all necessary components
(for all street lighting & external lighting DBs)
xi) For all Normal Power DB which are feeding power to the
laptops in classes and also for all the computer power DB ie.,
CPDBs , the DB shall have 2N for neutral busbar.
xii) required header aluminium trunking to receive all

conduits,branch trunking down to DBs with all supports etc.,
OFFICE BUILDING
Lighting, Normal Power, Emergency Lighting, Raw

7.1
Power, UPS Power Distribution Boards
Ground Floor LDB - 4 Way TPN Distribution Board for Ground

7.1.1 Each 0 17,700.00 1,700.00
Floor Lighting comprising
of Incomer :
i) 32 Amp TPN MCB
ii) 3# 32Amp DP ELMCB (30 mA)
iii)3# Phase Indicating Lamps
Outgoing :
i) 12 # 10 Amp SP MCB
First Floor LDB - 4 Way TPN Distribution Board for First Floor
7.1.2 Each 2 16,200.00 1,700.00
Lighting comprising
of Incomer :
i) 32 Amp TPN MCB
Outgoing :
Second Floor LDB - 4 Way TPN Distribution Board for Second

7.1.3 Each 0 17,700.00 1,700.00
of Incomer :
i) 32 Amp TPN MCB
Outgoing :
Terrace Floor LDB - 4 Way SPN Distribution Board for Second

7.1.4 Each 0 4,900.00 900.00
of Incomer :
i) 25Amp DP RCCB (30 mA)
ii)1# Phase Indicating Lamps
Outgoing :
Ground Floor ELDB - 8 Way SPN Distribution Board for Ground

7.1.5 Each 0 6,200.00 900.00
Floor Emergency Lighting comprising
of Incomer :
Outgoing :
First Floor ELDB - 12 Way SPN Distribution Board for First Floor
7.1.6 Each 2 6,950.00 900.00
Emergency Lighting comprising
of Incomer :
Outgoing :
Second Floor ELDB - 12 Way SPN Distribution Board for

7.1.7 Each 0 7,700.00 900.00
Second Floor Emergency Lighting comprising
of Incomer :
Outgoing :
Terrace Floor ELDB - 4 Way SPN Distribution Board for Second

7.1.8 Each 0 5,800.00 900.00
Floor Emergency Lighting comprising
of Incomer :
Outgoing :
LIFT SHAFT DB - 4Way SPN Lighting Distribution Board with B

7.1.9 Each 0 5,800.00 900.00
curve MCB- for Lift well lighting & power comprising of Incomer :
i) 25 Amp DP ELMCB (30 mA)

Outgoing :
i) 4 # 10/16 Amp SP MCB
Ground Floor RPDB - 8 Way TPN Distribution Board for Ground

7.1.10 Each 0 22,800.00 2,000.00
Floor Raw Power comprising
of Incomer :
i) 40 Amp TPN MCB
Outgoing :
i) 24 # 10/16/20 Amp SP MCB
First Floor RPDB - 8 Way TPN Distribution Board for First Floor
7.1.11 Each 2 18,500.00 2,000.00
Raw Power comprising
of Incomer :
i) 40 Amp TPN MCB
Outgoing :
i) 24 # 10/16/20 Amp SP MCB
Second Floor RPDB - 8 Way TPN Distribution Board for Second

7.1.12 Each 0 22,800.00 2,000.00
Floor Raw Power comprising
of Incomer :
i) 40 Amp TPN MCB
Outgoing :
i) 24 # 10/16/20 Amp SP MCB
Ground Floor UPSDB - 4 Way TPN Distribution Board for

7.1.13 Each 0 13,200.00 2,000.00
Ground Floor UPS Power comprising
of Incomer :
i) 40 Amp TP+2N MCB
Outgoing :
i) 12 # 16/20 Amp SP MCB
First Floor UPSDB - 6 Way TPN Distribution Board for First Floor
7.1.14 Each 2 13,200.00 1,700.00
UPS Power comprising
of Incomer :
i) 40 Amp TP+2N MCB
Outgoing :
i) 18 # 16/20 Amp SP MCB
Second Floor UPSDB - 6 Way TPN Distribution Board for

7.1.15 Each 0 14,600.00 2,000.00
Second Floor UPS Power comprising
of Incomer :
i) 40 Amp TP+2N MCB
Outgoing :
i) 18 # 16/20 Amp SP MCB
FACTORY BUILDING
Lighting, Normal Power, Emergency Lighting, Raw

7.2
Power, UPS Power Distribution Boards
LDB-1,3,4 - 6 Way TPN Distribution Board for Process House

7.2.1 Each 0 22,200.00 1,700.00
Lighting comprising
of Incomer :
i) 32 Amp TPN MCB
Outgoing :
LDB-2 - 8 Way TPN Distribution Board for Process House

7.2.2 Each 4 20,200.00 2,000.00
Lighting comprising
of Incomer :
i) 32 Amp TPN MCB
Outgoing :
ELDB-1,2,3 & 4 - 6 Way SPN Distribution Board for Process

7.2.3 Each 4 5,850.00 900.00
House Emergency Lighting comprising
of Incomer :
Outgoing :
RPDB - 8 Way TPN Distribution Board for Process House

7.2.4 Each 4 20,500.00 2,000.00
Area Raw Power comprising
of Incomer :
i) 63 Amp TPN MCB
Outgoing :
i) 24 # 16/20 Amp SP MCB

7.2.5 Each 0 21,400.00 2,000.00
of Incomer :
i) 63 Amp TPN MCB
Outgoing :
i) 12 # 16/20 Amp SP MCB

7.2.6 Each 0 20,400.00 2,000.00
of Incomer :
i) 63 Amp TPN MCB
Outgoing :
i) 12 # 16/20 Amp SP MCB
DB-1 1 BHK Distribution Board for Process House Area Raw

7.2.6 Each 16 42,500.00 2,000.00
Power comprising
of Incomer :
i) 63 Amp TP+N MCCB
Outgoing :
i) 5 # 32 Amp TPN MCB
ii) 7 # 16 Amp TPN MCB
iii) 2 # 32 Amp SPN MCB
DB-2 Labour Colony family Distribution Board for Process

7.2.6 Each 32 40,900.00 2,000.00
House Area Raw Power comprising
of Incomer :
i) 63 Amp TP+N MCCB
Outgoing :
ii) 8 # 16 Amp TPN MCB
iii) 3 # 32 Amp SPN MCB
DB-3 Labour Colony - Distribution Board for Process House

7.2.6 Each 6 32,300.00 2,000.00
of Incomer :
i) 63 Amp TP+N MCCB
Outgoing :
DB-4 - Distribution Board for Process House Area Raw Power

7.2.6 Each 0 43,400.00 2,500.00
comprising
of Incomer :
i) 63 Amp TP+N MCCB
Outgoing :
UPSDB - 12 Way TPN UPS Distribution Board for Process

7.2.13 Each 1 17,200.00 2,000.00
House UPS Power comprising
of Incomer :
i) 63 Amp TP+2N MCB
Outgoing :
i) 36 # 16/20 Amp SP MCB

7.2.13 Each 8 12,500.00 2,000.00
of Incomer :
i) 63 Amp TP+2N MCB
Outgoing :
i) 24 # 16/20 Amp SP MCB

7.2.13 Each 5 10,700.00 1,700.00
of Incomer :
i) 63 Amp TP+2N MCB
Outgoing :
i) 18 # 16/20 Amp SP MCB

7.2.13 Each 8 8,800.00 1,700.00
of Incomer :
i) 63 Amp TP+2N MCB
Outgoing :
i) 12 # 16/20 Amp SP MCB
SECURITY ROOM LPDB - 12 Way VTPN Distribution Board for

7.2.14 Each 2 35,000.00 2,000.00
Power comprising
of Incomer :
i) 63 Amp TPN MCCB
Outgoing :
i) 12 # 16/20 Amp TP MCB
7.3 EXTERNAL LIGHTING DB
External Lighting Distribution Boards as with Dimmer, Timer and

Day Light Sensor (IP55) as specified & shown on drgs.
7.3.1 Each EXT. LTG DB-1 & 2 (8 Way TPN DB) as follows : 2 18,800.00 2,000.00
Incomer - 32A TPN MCB
ii) 3# Phase Indicating Lamps
Outgoing Feeders as follows :
1) 3# 25A DP ELMCB (100mA)
2) 24 # 10A SP MCB
Total

(auth. Sign)
ALS
607.
1581
Rate
Total Amount
Total
19,400.00 -
17,900.00 35,800.00
19,400.00 -
5,800.00 -
7,100.00 -
7,850.00 15,700.00
8,600.00 -
6,700.00 -
6,700.00 -
24,800.00 -
20,500.00 41,000.00
24,800.00 -
15,200.00 -
14,900.00 29,800.00
16,600.00 -
23,900.00 -
22,200.00 88,800.00
6,750.00 27,000.00
22,500.00 90,000.00
23,400.00 -
22,400.00 -
44,500.00 712,000.00
42,900.00 1,372,800.00
34,300.00 205,800.00
45,900.00 -
19,200.00 19,200.00
14,500.00 116,000.00
12,400.00 62,000.00
10,500.00 84,000.00
37,000.00 74,000.00
20,800.00 41,600.00
3,015,500.00
SCARION ELECT
ELECTRICAL ENGINEERS & CON
A/6/B/305, Lokhpuram, Pokh II, Majiwade, Thane -
Email : [email protected] Mobile : +91 99679

PROJECT
Proj -003
NO.
DATE 24/08/2021
REVISION R2
Item No. Pay Unit
8.0
8.1 MTR.
8.2 MTR.
8.3 MTR.
8.4 MTR.
8.5 MTR.
8.6 MTR.
8.7 MTR.
8.8 MTR.
8.9 MTR.
8.10
8.10.1 MTR.
8.10.2 MTR.
8.10.3 MTR.
8.10.4 MTR.
8.10.5 MTR.
8.10.6 MTR.
8.10.7 MTR.
8.10.8 MTR.
8.11
8.11.1 Nos
8.11.2 Nos
8.11.3 Nos
8.11.4 Nos
8.12 Nos
8.13 Nos
8.14 Nos
8.15
8.15.1 Nos.
8.15.2 Nos.
8.15.3 Nos.
8.15.4 Nos.
8.15.5 Nos.
8.15.6 Nos.
8.15.7 Nos.
8.15.8 Nos.
8.15.9 Nos.
8.15.10 Nos.
8.15.11 Nos.
8.15.12 Nos.
8.16
8.16.1 MTR.
8.16.2 MTR.
8.17 MTR.
8.18
18.1 MTR.
18.2 MTR.
18.3 Nos.
18.4 Nos.
(auth. Sign)
SCARION ELECTRICAL
M/S. Siddhi Knitfab Pvt Ltd

Proj -003
24/08/2021
R2
BILL OF QUANTITIES (ELECTRICAL WORKS)
Description
SUB MAINS / CIRCUIT MAINS / POWER WIRING IN CONDUITS.
Supply & laying of 1100V grade PVC insulated FRLS Copper Wire in 25/32mm dia hard heavy duty PVC
conduits (for conduits getting buried in slab, floor screed,wall chasing) the rate include with heavy duty
conduit, fittings such as junction boxes, pull wire, bends, elbows, reducers, chase nipples, split couplings,
plugs etc.as required and Black enamelled M.S heavy duty conduit (for all conduits exposed above or below
false ceiling) with saddles as specified in the specification with all angles supports, studs,clamps, lock nuts
etc., as required by the architects / consultants
Making of zari in the wall / Floor using only electric cutter & semi finishing the surface.
Complete 18 guage GI wire pulling for slab and wall conduits after de -shutering of slab and after wall
conduit works
2 Runs of 2.5 Sq.mm PVC insulated copper FRLS wire along with 1 Run of 1.5 Sq.mm PVC insulated copper
wire for earthing, run in a 25 mm dia, 2mm thick PVC conduit for concealed/black enamelled MS conduit for
open( INCLUDING CONDUIT) from DB to Switch board, DB to 1st ltg point, from SB to SB ( For Lighting
Circuits) (Max 2 circuits of same phase in one conduit). For Office Building.
2 Runs of 2.5 Sq.mm PVC insulated copper FRLS wire along with 1 Run of 1.5 Sq.mm PVC insulated copper
wire for earthing, run in a 25 mm dia, 2mm thick PVC conduit for concealed/black enamelled MS conduit for
open( INCLUDING CONDUIT) from DB to Switch board, DB to 1st power point, from SB to SB ( For raw
power Circuits) (Max 2 circuits of same phase in one conduit). For Office Building
2 Runs of 4.0 Sq.mm PVC insulated copper FRLS wire along with 1 Runs of 2.5 Sq.mm PVC insulated copper
wire for earthing, run in a 25 mm dia,2mm thick PVC conduit for concealed/black enamelled MS conduit for
open (INCLUDING CONDUIT)LHSFTom DB to SB,DB to First Power point & SB to SB (For raw Power) (Max
2 circuits of same phase in one conduit). For Office Building
3 Runs (1 Nos for phase and 2 Nos for Neutral) of 4.0 Sq.mm FRLS copper wire along with 1 Runs of 4
Sq.mm FRLS copper wire for earthing, run in existing 25 mm dia PVC conduit/GI raceway from DB to 1st point
and looping .The rate shall include all fixing accessories ( For UPS Power) (Max 2 circuits of same phase in
one conduit). For Office Building.
3 Runs (1 Nos for phase and 2 Nos for Neutral) of 2.5 Sq.mm FRLS copper wire along with 1 Runs of
2.5Sq.mm FRLS copper wire for earthing, run in existing 25 mm dia PVC conduit/GI raceway from DB to 1st
point and looping. The rate shall include all fixing accessories and modular box ( For UPS Power) (Max 2
circuits of same phase in one conduit). For Office Building.
5 Runs (3 Nos for phase and 2 Nos for Neutral) of 6.0 Sq.mm FRLS copper wire along with 1 Runs of 4
Sq.mm FRLS copper wire for earthing, run in existing PVC conduit/GI raceway from DB to 1st point and
looping .The rate shall include all fixing accessories ( For 3 phase UPS Power) (Max 2 circuits of same
phase in one conduit). For Office Building.
4Cx4sq.mm. CU. Flexible Cable (1 Nos for phase, 2 Nos for Neutral and 1 Nos for earthing) run in cable tray /
PVC trunking from DB to 1st point and looping .The rate shall include all fixing accessories ( For Process
House Area UPS Power) (Max 2 circuits of same phase in one conduit). For Process House Area.
3Cx4sq.mm. CU. Flexible Cable run in cable tray / PVC trunking from DB to 1st point and looping .The rate
shall include all fixing accessories ( For Process House Area Raw Power Points) (Max 2 circuits of same
phase in one conduit). For Process House Area.
3Cx2.5sq.mm. CU. Flexible Cable run in PVC conduit/PVC trunking from DB to 1st point Light Point and
looping .The rate shall include all fixing accessories (For Process House Area Lighting Circuit) (Max 2 circuits
of same phase in one conduit). For Process House Area.
Supply & laying of following size heavy guage 25mm dia hard 2mm thick PVC conduits buried in slab, floor
screed,wall chasing including all fixing accessories such as Conduit bends, junction boxes, elbows complete
with all accessories etc. and Black enamelled M.S conduit (for all conduits exposed above or below false
ceiling) with saddles as specified in the specification with all angles supports, studs,clamps, lock nuts etc., as
required by the architects / consultants
Making of zari in the wall / Floor using only electric cutter & semi finishing the surface.
Complete 18 guage GI wire pulling for slab and wall conduits after de -shutering of slab and after wall
conduit works
32mm dia. 2mm PVC conduit.
32mm dia. 2mm Black enammelled MS conduit.
25mm dia. 2mm Black enammelled MS conduit.
25mm dia. 2mm PVC conduit.
20mm dia. 2mm PVC conduit
32mm dia. PVC flexible conduit.
POINT WIRING
Supply & laying of 2 Runs of 2.5 Sq.mm and 1 Run of 1.5 Sq.mm FRLS PVC insulated copper wire run in
2mm thick PVC conduit of not less than 20mm dia. A separate neutral & earthing shall be run for each circuit,
The rate shall include all fixing accessories like back box , modular plate , switch , ceiling rose , Angle holder ,
Straight Hoder , PVC dummy sheet , Screws , terminations etc.
NOTE: The rate shall include the termination of wire using pin type lugs.
Primary light point SB to First Light Point by 6A switch (Office Building)

Primary light point DB to First Light Point - MCB control (Office Building)
Secondary light point- Points looped from 11.10 and 11.11 (Office Building)
Secondary (on board) 6A switch socket outlet(also applicable for socket point from a lighting circuit)
AC power point controlled by one 16A SP switch with neon indicator & 6/16A shutter type socket outlet near
AC unit with 2 x 2.5 + 1x1.5sqmm FRLS cu multistrand wires including 25 mm HMS rigid LHSFT PVC conduit
with required accessories, including GI back box ,Switch socket,plate and required accessories. (Wiring from
switch to socket near unit is considered in this item and wiring from DB to switch considered in circuit mains in
item no 1.2.1)
Wiring for One Ceiling fan controlled by one 6 A switch on switch board and electronic step type fan regulator
with 3 x 2.5 sqmm FRLS cu multistrand wires through 25 mm HMS rigid PVC conduit ,Fan hook etc.and
required accessories. (G.I back box,switch,sockets included)
Wiring for One Exhaust fan controlled by one 6 A switch on switch board and 6A plug near fan with 3 x 2.5
sqmm FRLS cu multistrand wires through 20 mm HMS rigid PVC conduit with required accessories.(G.I back
box,switch,sockets included)
OUTLETS:
Supply, erection, testing and commissioning of switches & sockets of approved LEAGRAND make ARTER
MODEL suitable for Flush mounting on the PVC trunking )of material mounted surface of PVC
TRUNKING/ on wall/work stations/ concealed in the walls, etc as required by the engineer along with
necessary fixing accessories like GI box, phase plates modular switches and sockets etc., complete as
required by the engineer-in-charge.
2 # 6/13A Socket controlled by 1 # 16A Switch (UPS) (Office Area). The rate include GI backbox, modular
plate and terminations etc
1 # 6A Socket controlled by 1 # 6A Switch (UPS) (Office Area). The rate include GI backbox, modular plate
and terminations etc
1 # 6A Socket controlled by 1 # 6A Switch (Raw Power) (Office Area). The rate include GI backbox, modular
plate and terminations etc
1 # 16A Socket controlled by 1 # 16A Switch (Raw Power) (Office Area). The rate include GI backbox,
modular plate and terminations etc
1 # 6A Socket controlled by 1 # 6A Switch (UPS) (Process House Area) on Table, in PVC trunking. The rate
include GI backbox, modular plate and terminations etc
1 # 16A Socket controlled by 1 # 16A Switch (UPS) (Process House Area) on Table, in PVC trunking. The rate
include GI backbox, modular plate and terminations etc
1 # 6A Socket controlled by 1 # 6A Switch (Raw Power) (Process House Area) on Table, in PVC trunking. The
rate include GI backbox, modular plate and terminations etc
1 # 16A Socket controlled by 1 # 16A Switch (Raw Power) (Process House Area) on Table, in PVC trunking.
The rate include GI backbox, modular plate and terminations etc
20A, multi Pin shuttered type socket outlet with 20A DP indicator switch , inclusive of GI box and modular
plate
Supply installtion of industrial combined interlocked sockets (SCAME MAKE)
Supply and installation of 16A 3pin (1ph) metal clad Industrial socket in enclosure with top. (For BOPT)
(SCAME make GRP -GD SERIES combined interlock )
Supply and installation of 16A 5pin (3ph) metal clad Indistrial socket in enclosure with top. (SCAME make
GRP -GD SERIES combined interlock )
Supply and installation of 20A 5pin (3ph) metal clad socket in enclosure with top. (For Wrapping M/C)
(SCAME make GRP -GD SERIES combined interlock )
PVC TRUNKING (Process House)
Supply, erection, testing and commissioning of PVC Trunking of approved make (Legrand) of material
mounted table surface, hanging with support from Cable tray etc as required by the engineer along with
necessary fixing accessories.
50 x 105mm DLP U- PVC Trunking ( LEGRAND MAKE)
50 x 150mm DLP U- PVC Trunking ( LEAGRAND MAKE)
Vertical Dropping for Electrical System - Support Steel pipe structure for PVC Trunking dropping down from
Electrical Cable Tray.
TRUNKING (Office Building)
Supply and installation of Hot dIp Galvanised 1.6 mm thick inward flanged floor Trunking with all accessories
like junction boxes with covers,bends,tees,coupleres,GI Cover etc to complete job. Trunking should be clamp
by G. I. Strip at every 1.5 meter on floor.Providing of race way made from minimum 1.6 mm thick
pregalvenised steel sheet, factory fabricated, with internal partition of 1mm thick sheet of tee's, bends, The
pregalvenised sheet shall be as per having tensile strength of minimum 1500 N/sq.m. and average zinc
coating of 120 GSM & Confirms to EN 50 085 - 2 - 2.
GI floor trunking in screed floor or on wall including chasing and refilling the trench as per the route shown in
the drawing and approved by consultant/client at site including clamping & closing the open ends temporarily
by suitable end covers against entry of dust or any foriegn materials.
FOR POWER (UPS/RAW)
100x38mm Underfloor GI raceway
150x38mm Underfloor GI raceway
JUNCTION BOXES
Providing of 1 mm thick pregavanised sheet height adjustable junction box LEGARND MAKE (65-
90mm) with flyover including providing completely with 2 mm top cover plate with provision knock
outs on four sides to accept raceways of specified sizes and cutouts to fix required outlets.(Office
area/Work Station)(Suitable raise/false floor application with finishing material will be carpet )
150x150x50mm GI Junction Box

225x225x50mm GI Junction Box
11.0 TOTAL OF CONDUIT WIRING
ION ELECTRICALS
RICALS
TRACTORS
Maharashtra - 400607.
81263 / +91 9987741581
CTRICAL WORKS)
RATE
Qty. Total Amount
MAT. LAB. TOTAL
1488 114.00 35.00 149.00 221,712.00
1250 114.00 35.00 149.00 186,250.00
850 146.00 35.00 181.00 153,850.00

1250 138.00 25.00 163.00 203,750.00
550 84.00 25.00 109.00 59,950.00
50 286.00 25.00 311.00 15,550.00
35000 158.00 25.00 183.00 6,405,000.00
14900 118.00 25.00 143.00 2,130,700.00
7500 82.00 25.00 107.00 802,500.00
3500 64.00 12.00 76.00 266,000.00
680 112.00 15.00 127.00 86,360.00
500 80.00 15.00 95.00 47,500.00
900 36.00 12.00 48.00 43,200.00
1200 28.00 12.00 40.00 48,000.00
800 14.00 8.00 22.00 17,600.00
600 10.00 8.00 18.00 10,800.00
500 8.00 8.00 16.00 8,000.00

228 750.00 225.00 975.00 222,300.00
R.O. 1,350.00 450.00 1,800.00 -
177 225.00 100.00 325.00 57,525.00
5 265.00 45.00 310.00 1,550.00
15 1,485.00 315.00 1,800.00 27,000.00
R.O. 1,250.00 315.00 1,565.00 -
10 686.00 270.00 956.00 9,560.00
116 730.00 80.00 810.00 93,960.00
14 340.00 80.00 420.00 5,880.00
103 340.00 80.00 420.00 43,260.00
41 442.00 80.00 522.00 21,402.00
485 340.00 80.00 420.00 203,700.00
215 440.00 80.00 520.00 111,800.00

10 340.00 80.00 420.00 4,200.00
166 440.00 80.00 520.00 86,320.00
3 525.00 80.00 605.00 1,815.00
8 1,625.00 300.00 1,925.00 15,400.00
33 2,810.00 300.00 3,110.00 102,630.00
5 2,975.00 300.00 3,275.00 16,375.00
1050 602.00 80.00 682.00 716,100.00
850 1,052.00 100.00 1,152.00 979,200.00
850 504.00 80.00 584.00 496,400.00
300 442.00 100.00 542.00 162,600.00
60 588.00 114.00 702.00 42,120.00
33 1,002.00 112.00 1,114.00 36,762.00

21 1,116.00 135.00 1,251.00 26,271.00
14,190,852.00
SCARION ELECTRICALS

DATE 24/08/2021
REVISION R2
Pay
Unit
10.0 Uninterruptible Power supply system (UPS System)

.
Supply, Installation, Testing and Commissioning of UPS system
10.1
complete with the following and as per specification,
i) Type: Parallel Redundant (1+1)

ii) Parallelling Kit/software, accessories
iii) Copper flexible wires, cables required within the UPS, from
UPS to battery and vice versa and within the battery racks.
iv) battery cubicles
v) batteries with all ready to start inter-connections
vi) Isolation Transformers
vii) Harmonic Filters
viii) necessary Hot Dip G.I cable trays and trunking within the
battery limit of ups room
ix) all Hot dip gavanised steel supports, angles etc.,
x) UPS integration software on BMS and necessary control
wiring and power wiring.
xi) double neutral sizing to be considered for wiring and cabling.
xii) Transportation to Site and insurance till handover to the

client.
10.1.1 10 KVA UPS 3ph/3ph with 60 min Battery Back up SET 2
Total for UPS Section 10.0

(auth. Sign)
ECTRICALS
RS & CONTRACTORS
wade, Thane - Maharashtra - 400607.
ile : +91 9967981263 / +91 9987741581
Rate in INR
mat lab total

Total Amount
- 10,000.00 10,000.00 20,000.00
- 10,000.00 10,000.00 20,000.00
- 10,000.00 10,000.00 20,000.00
- 45,000.00 45,000.00 90,000.00
- 3,500.00 3,500.00 7,000.00
157,000.00
SCARION ELECTRICALS
CLIENT:
PROJECT
Proj -003
NO.
DATE 24/08/2021
REVISION R2
Item No. Pay Unit Description Qty.
11.0 LIGHT FIXTURES
(SITC) of light Fixtures as specified in the specification

11.0
complete with:
a) All fixing accessories & mounting bracket.
b) Earthing of fittings.
c) Connections from the ceiling rose or junction box to the light

fixures including the terminations with all necessary
accessories.
d) with mounting bracket for the external terminal lights as

shown in the drawings
All Light Fixures with Electronic Ballast with THD <10 %
Process House Area
95W LED Low Bay Light suspended light fixture (along with
11.1 Each 293
all required mounting accessories)
19W LED Light Fixtures (along with all required mounting

11.2 Each accessories) equivalent to Philips model no. TCW450 IP65 15
OR equivalent subject to architects\ clients approval.
Office Building
11.3 Each 15W LED Spot Light (8") fixture 47

11.4 Each 28W LED Panel Light (2'x2') 87
11.5 Each 9W LED Down Light (6"X6') 114
11.6 Each 12W LED Hanging Down Light (6"X6') 65
11.7 Each 18W LED Decorative Round Light (1') 2
11.8 Each 18W LED Cafeteria Light Point 20
11.9 Each 15W LED Down Light (1' X 1') 22
40W LED Linear Light (4'x8")

11.10 Each 31
11.11 Each 10W LED BULK Head Light Fixtures 13
SITC of 60W LED HYBRID SOLAR STREET LIGHTING

LIMINAIRE MOUNTED ON 6MTR. HEIGHT SIMILAR TO
11.12 Each 37
BAJAJ MAKE BAJAJ 60W SOLAR BSZSL ALL IN ONE.
11.13 Each 20W LED 4 feet Fixtures 20
Residential Building
11.3 Each 15W LED Spot Light (8") fixture 0
11.4 Each 28W LED Panel Light (2'x2') 0
11.5 Each 9W LED Down Light (6"X6') 50
11.6 Each 12W LED Hanging Down Light (6"X6') 0
11.7 Each 18W LED Decorative Round Light (1') 0
11.8 Each 18W LED Cafeteria Light Point 0
11.9 Each 15W LED Down Light (1' X 1') 100
40W LED Linear Light (4'x8")

11.10 Each 31
11.11 Each 10W LED BULK Head Light Fixtures 0
SITC of 60W LED HYBRID SOLAR STREET LIGHTING

11.12 Each LIMINAIRE MOUNTED ON 6MTR. HEIGHT SIMILAR TO 0
BAJAJ MAKE BAJAJ 60W SOLAR BSZSL ALL IN ONE.
11.13 Each 20W LED 4 feet Fixtures 100

EXIT SIGNAGE PROLITE MAKE PEL 108E/M 2 HRS
11.14 Each 21
BATTERY BACK
Total
(auth. Sign)
CTRICALS
& CONTRACTORS
e, Thane - Maharashtra - 400607.
+91 9967981263 / +91 9987741581
ECTRICAL WORKS
Rate
Total Amount
Mat lab Total
- 350.00 350.00 102,550.00
- 250.00 250.00 3,750.00
- 180.00 180.00 8,460.00

- 250.00 250.00 21,750.00
- 180.00 180.00 20,520.00
- 180.00 180.00 11,700.00
- 180.00 180.00 360.00
- 250.00 250.00 5,000.00
- 180.00 180.00 3,960.00
- 250.00 250.00 7,750.00
- 150.00 150.00 1,950.00
- 4,500.00 4,500.00 166,500.00
- 150.00 150.00 3,000.00
- 180.00 180.00 -
- 250.00 250.00 -
- 180.00 180.00 9,000.00
- 180.00 180.00 -
- 180.00 180.00 -
- 180.00 180.00 -
- 180.00 180.00 18,000.00
- 250.00 250.00 7,750.00
- 150.00 150.00 -
- 4,500.00 4,500.00 -
- 150.00 150.00 15,000.00

- 250.00 250.00 5,250.00
412,250.00
SCARION ELECTRICAL

DATE 24/08/2021
REVISION R2
Pay
Unit
12.0 EARTHING
12.1 Each Earthing Stations (Chemical Earthing) 50

Type T 39 Providing Pipe G.I. Bonding earthing stations for
equipment earthing with 3mtr length, dia of pipe 40mm inner,
80mm outer G.I. pipe as specified and required and in IS 3043 -
1987 complete with:
a) Excavation in hard murram
b) Electrode with disconnecting link arrangement.
c) Inner pipe. With (200-250 microns)
d) outer pipe G.I. pipe plated with 80-70 microns
e) back fill compound -moisture retaining compound having 13

times more (hygroscopic) water retaining capacity then its dry
volume.
12.2 Each Earthing Stations (Chemical Earthing) 25

Type T 39 Providing Pipe Copper Bonding earthing stations for
equipment earthing with 3mtr length, dia of pipe 40mm inner,
80mm outer copper bonding pipe as specified and required and
in IS 3043 -1987 complete with:
a) Excavation in hard murram
b) Electrode with disconnecting link arrangement.
c) Inner pipe. With (200-250 microns)
d) outer pipe cu plated with 80-70 microns

e) back fill compound -moisture retaining compound having 13
times more (hygroscopic) water retaining capacity then its dry
volume.
12.3 Earth wire/strips
Supply & laying Cu or G.I earthing strips as mentioned

for interconnecting the earthing stations, panels, DB's,
Lifts etc. in built-up trenches, on walls / ceiling, buried
in ground, generally as specified & shown on
on drawings complete with;
a) Fixing accessories such as bolts, nuts,washers, studs.,

Jointiing by brazing/welding with overlapping copper plates over
& below two joints.
b) Corrosion protection of buried conductors with

bituminous coating and covered with PVC tapes.
COPPER EARTH STRIP
12.2.1 Mtr. 50 x 10 mm Cu R.O.
12.2.2 Mtr. 50 x 6 mm Cu 260
12.2.3 Mtr. 50 x 5 mm Cu R.O.
12.2.4 Mtr. 40 x 10 mm Cu R.O.
12.2.5 Mtr. 40 x 6 mm Cu R.O.
12.2.6 Mtr. 25 x 6 mm Cu 400
12.2.7 Mtr. 25 x 5 mm Cu R.O.
12.2.8 Mtr. 25 x 3 mm Cu 350
12.2.9 Mtr. 30 x 6 mm Cu R.O.
12.2.10 Mtr. No. 8 SWG Cu 400
12.2.11 Mtr. No. 6 SWG Cu R.O.
GI EARTH STRIP
12.2.12 m 50 x 6 mm GI 6300
12.2.13 m 40 x 10 mm GI R.O.
12.2.14 m 40 x 6 mm GI 250
12.2.15 m 30 x 6 mm GI R.O.
12.2.16 m 25 x 6 mm GI 1000
12.2.17 m 25 x 3 mm GI 1500
12.2.18 Mtr. No. 8 SWG GI 400
12.2.19 Mtr. 1C x 25 sq.mm Insulated Cu Flexible Cable For Earthing 200
12.2.21 Mtr. 1C x 95 sq.mm Insulated Cu Flexible Cable For Earthing R.O.
Supplying and laying of RCC Hume pipes/ HDPE pipes under

ground in soft/hard murrum with all required RCC
12.3 blocks/supports, encasing etc., as per specification and as
required. (This per running meter cost should also include the
necesssary excavation, laying in position and back filling etc.)
Total
(auth. Sign)
ECTRICALS
S & CONTRACTORS
e, Thane - Maharashtra - 400607.
: +91 9967981263 / +91 9987741581
ECTRICAL WORKS
Rate
Total Amount
Mat lab Total
11,500.00 3,000.00 14,500.00 725,000.00 20.00
14,200.00 3,000.00 17,200.00 430,000.00

2,028.00 125.00 2,153.00 -
1,556.00 98.00 1,654.00 430,040.00
1,922.00 98.00 2,020.00 -
1,987.00 125.00 2,112.00 -
1,909.00 110.00 2,019.00 -
828.00 62.00 890.00 356,000.00
1,022.00 70.00 1,092.00 -
754.00 64.00 818.00 286,300.00
980.00 70.00 1,050.00 -
72.00 6.00 78.00 31,200.00
118.00 6.00 124.00 -
326.00 100.00 426.00 2,683,800.00
508.00 125.00 633.00 -
314.00 100.00 414.00 103,500.00

186.00 55.00 241.00 -
118.00 55.00 173.00 173,000.00
102.00 55.00 157.00 235,500.00
16.00 6.00 22.00 8,800.00
242.00 25.00 267.00 53,400.00
470.00 35.00 505.00 101,000.00
1,106.00 55.00 1,161.00 -
1,466.00 55.00 1,521.00 152,100.00
496.00 80.00 576.00 115,200.00
392.00 80.00 472.00 188,800.00
276.00 55.00 331.00 33,100.00
6,106,740.00

Proj-003 - Siddhitex - ELECTRICAL BOQ - Revised03 - NM

Uploaded by

Copyright:

Available Formats

Proj-003 - Siddhitex - ELECTRICAL BOQ - Revised03 - NM

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Proj-003 - Siddhitex - ELECTRICAL BOQ - Revised03 - NM

Uploaded by

Copyright:

Available Formats

SCARION ELECTRICALS

ELECTRICAL ENGINEERS & CONTRACTORS

Kind Attn; Mr. Diganta Talukdar

1.0 HT SWITCHGEAR BREAKER PANEL RS. 150,000.00

2.0 TRANSFORMERS RS. 125,000.00

3.0 HT CABLES RS. 844,325.00

4.0 LIGHTNING ARRESTORS RS. 1,019,625.00

5.0 MV SWITCHGEAR & POWER PANELS RS. 261,955.00

6.0 MV CABLING RS. 16,324,084.00

7.0 DISTRIBUTION BOARD RS. 3,015,500.00

8.0 CONDUIT WIRING RS. 14,190,852.00

10.0 UPS RS. 157,000.00

11.0 LIGHT FIXTURES RS. 412,250.00

12.0 EARTHING RS. 6,106,740.00

SUB TOTAL RS. 42,607,331.00

GST @ 18% 7,669,319.58

GRAND TOTAL 50,276,650.58

For SCARION ELECTRICALS

CLIENT: M/S. Siddhi Knitfab Pvt Ltd

1.0 HT SWITCHGEAR BREAKER PANEL

1 # 800 A, 11KV, HT Breaker & 3 # 800 A, 11KV, HT breaker

ii)Installing, testing & commi-ssioning generally as speci-fied and

iii)Inspection of the above by Electricity Supply Board and getting

iv) Termination of incoming/outgoing cables as required and or

v) with all required supports/frames, if necessory

vi) with required short circuit rating re-engineered as per

(Refer Main SLD SL-147-EL0-500. for details along with

TOTAL FOR HT SWITCHGEAR THREE BREAKER PANEL

- 60,000.00 60,000.00 60,000.00

- 90,000.00 90,000.00 90,000.00

CLIENT: M/S. Siddhi Knitfab Pvt Ltd

2.1 11KV/0.433 KV Step Down Transformer

ii)'Installing, testing & commissioning generally as speci-

iii) Termination of incoming/outgoing cables

iv) Required Foundation for Mounting Transformers

vi)Inspection of the above by Electricity Supply Board and

viii) with all required Exhaust/SA fans as per requirement

ix) Copper Tinned Bus Bars

x) BMS Compatibility with all necessary potential free contacts.

2.1.2 Each Filteration of Transformer of oil if required (Aprrox. 2500 ltrs) RO

Supply Installation & testing ,commissioning of TPN Air insulated

Refer SL-147-LT PANEL SPEC& BUSDUCT for details )

For SCARION ELECTRICALS

- 20,000.00 20,000.00 40,000.00

CLIENT: M/S. Siddhi Knitfab Pvt Ltd

3.1 Supply, laying & testing of

11KV 3C XLPE (E ) armoured aluminium cables

3.1.1 m 3C 300 Sqmm RO 2,236.00

3.1.2 m 3C 240 Sqmm 100 1,652.00

3.1.3 m 3C 185 Sqmm 50 1,372.00

3.1.4 m 3C 150 Sqmm R.O. 1,302.00

3.1.5 m 3C 120 sqmm R.O. 1,158.00

3.2 Making HT Indoor type cable end terminations KIT

3.2.1 Set 3C 300 Sqmm RO 14,500.00

3.2.2 Set 3C 240 Sqmm 2 11,550.00

3.2.3 Set 3C 185 Sqmm 12 10,350.00

3.2.4 Set 3C 150 Sqmm R.O. 11,500.00

3.2.5 Set 3C 120 sqmm R.O. 11,500.00