Eth - 7000024824 - Electrical Boq

MUNICIPAL CORPORATION OF GREATER MUMBAI
PROPOSED BMC GENERAL HOSPITAL & STAFF QUARTERS

On Plot bearing CTS No. 11A/4,Chandivali, Sangharsha Nagar, Kurla - 400072
SUMMARY - ELECTRICAL SYSTEM HOSPITAL+ RESIDENTIAL BUILDING
A. SUMMARY - ELECTRICAL SYSTEM HOSPITAL BUILDING

Sr. No. Description Amount
1 ELECTRICAL SYSTEM ₹ 29,40,17,367.00
2 ELEVATORS ₹ 4,53,34,076.00
3 AUDIO SYSTEM ₹ 5,53,07,271.00
4 VISUAL PROJECTION ₹ 5,27,16,622.00
5 STAGE LIGHTING ₹ 20,53,570.00
Total ₹ 44,94,28,906.00
B. SUMMARY - ELECTRICAL RESIDENTIAL BUILDING

Sr. No. Description Amount
1 ELECTRICAL SYSTEM ₹ 6,12,83,970.00
2 ELEVATORS ₹ 2,76,87,588.00
Total ₹ 8,89,71,558.00
GRAND TOTAL (A+B) ₹ 53,84,00,464.00
Page 1 of 55
BILL OF QUANTITIES HT & LT ELECTRICAL WORKS - HOSPITAL BUILDING
S/I/T/C
SR.NO REF. CODE DESCRIPTION QTY UNIT S/I/T/C RATE
TOTAL AMOUNT
Supply, Installation testing and Commissioning of IP55 category 22 KV VCB panel with 2 incomers & 4
outgoing breakers as per specifications & SLD of the panel. ALL breakers shall be with A/V/KWH meters and
1 BAH-ELEC-FA-01 necessary power pack shall be provided ALL incomers & outgoing cables shall be top entry in panel. Scope 1.00 Set 32,85,000.00 32,85,000.00
includes manufacturing, transportation, loading, unloading, shifting to final location, checking of foundation
level. interconnection between accessories mounted on HT VCB with mounting of loose acessories supplied
by vendor.
EQUIPMENT DETAILS : INCOMING 2 NOS OF 22kV, 800A, 25kA/1SEC, AND OUTGOING 4 NOS OF 22kV,
800A, 25kA/1SEC,INDOOR, VCB, ICOG PANEL No. OF POLES : 3(Three). RATED VOLTAGE : 22kV RATED
CURRENT : 800A TEST CONFIRMING TO : IEC:62271-200 / IEC:60694 / IEC:60298
Supply, Installation testing and Commissioning of Indoor type Dry type CRT Transformer with Enclosure
having 22 KV/0.415 KV voltage levels low loss type with rating of 1600 KVA with OLTC & RTCC Taps on
Primary Winding for+ 10% to – 10% in steps of 2.5%, Primary Voltage Variation On Load Tap Changer,No. of
switch positions : 9, IS – 11171 – 1985 & IS: 2026 -2011 With Latest standard and Energy efficiency Level,
2 BAH-ELEC-FA-02 3.00 Nos 58,35,000.00 1,75,05,000.00
Losses At 50% Loading : 6320 W (Max.), At 100% Loading : 16800 W (Max.) Scope includes Supply
transportation, loading, unloading, shifting to final location, checking of foundation level, welding of
stoppers on foundation channels, including all labour and materials. Inteconnection between accssories
mounted on the transformer & marshalling box along with mounting of loose accessories supplied by
vendor.Losses
Providing and as per latest
erecting HeatIS&ECBC norms.
shrinkable outdoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable
3 BAH-ELEC-RA-65 25.00 Nos 18,615.00 4,65,375.00
3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT
Providing and erecting Heat shrinkable outdoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable
4 BAH-ELEC-RA-66 16.00 Nos 24,408.00 3,90,528.00
3x240 to 400 sq. mm. with necessary material as per specification no. CB-JT/HT
Supplying , erecting & terminating 3 x 185 sq. mm. aluminium 22 kV(E), XLPE armoured cable on wall/ceiling
5 BAH-ELEC-RA-67 150.00 Mtr 2,490.00 3,73,500.00
or laid in provided trench / pipe in an approved manner as per specification no. CBHT
Supplying , erecting & terminating 3 x 240 sq. mm. aluminium 22 kV(E), XLPE armoured cable on wall/ceiling
6 BAH-ELEC-RA-68 500.00 Mtr 2,902.00 14,51,000.00
or laid in provided trench / pipe in an approved manner as per specification no. CBHT
Providing Round bottom FIRE Bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet
7 R2-ME-15-31-a with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ 80.00 Nos 814.00 65,120.00
wall hook.
Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height
8 R2-ME-15-31-b frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly 45.00 Nos 4,748.00 2,13,660.00
painted with one coat of red lead and two coats of silver Paint.
Supplying and erecting Wall hook 225mm projection for keeping fire buckets made out of 15 mm dia. M.S.
9 R2-ME-15-31-c 45.00 Nos 271.00 12,195.00
Rod grouted in wall to a depth of minimum 15cms
Page 2 of 55
S/I/T/C
TOTAL AMOUNT
Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn,
10 R2-ME-15-31-d crepe bandage, gauge bandage, medicated ready to use bandage (Bandaid) adhesive tape for medicinal use, 45.00 Nos 3,392.00 1,52,640.00
scissors, anti-septic solution etc. (All above contents shall be of standard makes)
Supplying and fixing PVC Synthetic elastomer electrically m2 insulating mat with class A insulation
11 RBH18-PWD-10-2-30 175.00 Sqm 4,867.00 8,51,725.00
conforming to IS: 15652 – 2006 & CPRI tested having 2 mm thickness upto 3.3 Kv
Supplying and fixing PVC Synthetic elastomer electrically m2 insulating mat with class B insulation
12 RBH18-PWD-10-2-31 200.00 Sqm 5,236.00 10,47,200.00
conforming to IS: 15652 – 2006 & CPRI tested having 2.5 mm thickness upto 11 kV
Supplying and erecting D.C.P. type Fire Extinguisher 6 kg capacity cartridge type with Gun Metal cap 150
gram CO2 gas cartridge, powder and brackets conforming to IS 2171- 1985/ IS 15683 and complete erected
13 R2-ME-15-30-e 40.00 Nos 2,645.00 1,05,800.00
with necessary clamps made from 50x6 mm M.S. flat with nuts & bolts grouted in wall complete.
Fluorescent emergency light fitting with 1 No. 1 feet (30cms.) single tube 9 / 11 W with M.F. SLA rechargable
14 R2-ME-5-15-a 60.00 Nos 1,332.00 79,920.00
battery with 3 hrs of back up..
15 R2-ME-15-29-a SITC of Auto glow signage for Emergency Fire Exit 100.00 Nos 814.00 81,400.00
16 R2-ME-15-29-b SITC of Auto glow signage for Staircase direction 96.00 Nos 814.00 78,144.00
17 R2-ME-15-29-c SITC of Auto glow signage for Do not use lift in case of Fire etc. 100.00 Nos 1,085.00 1,08,500.00
Supply, Unloading at site, shifting to final location, assembling, leveling, grouting, erecting, testing and
commissioning of following panels as per drawings. Any sort of fabrication work required for erection of
panel at site shall be done by the contractor. The contractor shall also check for all the loose joints and
continuity of the panel. Any physical or technical defects envisaged by the contractor shall be informed to
client as soon as panels are opened.As per SLD
18 BAH-ELEC-FA-04 SITC of LT KIOSK-2 (S/S) As per SLD 3.00 Nos 53,26,850.00 1,59,80,550.00
LT KIOSK-2 (S/S) including 2500A, 50kA TPN EDO ACB with multi function meter with RS485 port and
Modbus protocol. With 3200 amps 4 pole (50 KA for 1 sec.) , 415V, 50Hz, AC, AL bus bars.Also including
2000 Amps, 4 pole Automatic power transfer switch for MLTP, 3 Nos. of 1250 amps, TPN,50KA, EDO ACB, as
outgoing.
19 BAH-ELEC-FA-05 SITC of MAIN LT PANEL As per SLD 1.00 Nos 76,50,000.00 76,50,000.00
MAIN LT PANEL Panel comprising of 03 nos. of 2000 amps, TPN, EDO TYPE ACB incomer with 2000 amps 4
pole (50 KA for 1 sec.) , 415V, 50Hz, AC, AL bus bars alongwith 02 nos. of 2000 amps, 4 ploe ACB (EDO
TYPE) Buscoupler. Panel shall have 03 no. of 1600A, 50KA, TPN EDO Type ACB, 02 no. of 1250A, 50KA, TPN
EDO Type ACB, 02 no. of 800A, 50KA, TPN EDO Type ACB, 04 nos of 630A, 35KA, TPN MCCB, 06 nos of 500A,
35KA, TPN MCCB, 06 nos of 400A, 35KA, TPN MCCB , 05 nos of 250A, 35KA, TPN MCCB, 01 nos of 160A,
35KA, TPN MCCB, 01 nos of 100A, 35KA, TPN MCCB as outgoing. All incoming & outgoing feeders shall be
provided Meter with ammeter, voltmeter & with communication cable and ready RS485 port and Modbus
protocol.
20 BAH-ELEC-FA-06 SITC of APFCR PANEL-700 KVAR - 1 & 2 As per SLD 3.00 Nos 14,56,000.00 43,68,000.00
Page 3 of 55
S/I/T/C
TOTAL AMOUNT
APFCR PANEL-700 KVAR - 1 & 2 Panel comprising 1250 amps, 50KA, TP, EDO type ACB as incomer
including 1250 amps 4 pole (50 KA for 1 sec.) , 415V, 50Hz, AC, AL bus bars and 300 amps 4 pole (50 KA for
1 sec.) , 415V, 50Hz, AC, AL bus bars. Panel shall have 02 nos of 125A, 25KA, TPN MCCB with 02 nos of
50KVAR fixed capacitors, 06 no. 125A, 25KA, TPN MCCB with 06 no. of 50KVAR capacitor , 04 no. 63A, 25KA,
TPN MCCB with 04 no. of 25KVAR capacitor, 02 no. 40A, 25KA, TPN MCCB with 02 no. of 15KVAR capacitor
and 02 no. 32A, 10KA, TPN MCCB with 02 no. of 10KVAR capacitor bank. Panel shall have 16stage APFC relay
as specified.
21 BAH-ELEC-FA-07 SITC of EMERGENCY PANEL As per SLD 1.00 Nos 32,90,000.00 32,90,000.00
EMERGENCY Panel comprising 1600 Amps, 4 pole, 50KA, ATS suitable 50 kA/1sec. system fault level as per
specification.ASCO 7000 series and 1600 amps, TPN, 50KA, EDO type ACB as incomer with voltmeter &
ammeter and with 1600 amps 4 pole (50 KA for 1 sec.) , 415V, 50Hz, AC, AL bus bars. Panel shall have 01 no.
of 1250A, 50KA, TPN, MDO type ACB with shunt trip command from FAS panel ,02 nos of 630A, 35KA, TPN
MCCB, 02 nos of 160A, 35KA, TPN MCCB 01 nos of 125A, 35KA, TPN MCCB, 02 nos of 100A, 35KA, TPN
MCCB 01 nos of 80A, 35KA, TPN MCCB, 01 nos of 63 A, 35KA, TPN MCCB, 01 nos of 40A, 35KA, TPN MCCB
and 01 no. of 32A, 35KA, TPN MCCB as outgoing. Feeders as specified in SLD shall provided Meter with
ammeter, voltmeter & with communication cable and ready RS485 port and Modbus protocol
22 BAH-ELEC-FA-09 SITC of Medical EQUIPMENT PANEL As per SLD 1.00 Nos 12,50,000.00 12,50,000.00
Medical EQUIPMENT Panel comprising 02 nos. of electrically interlocked 1250 amps, 50KA, TPN, EDO type
ACB as incomer including Meter with ammeter, voltmeter including 1250 amps 4 pole (50 KA for 1 sec.) ,
415V, 50Hz, AC, AL bus bars. Panel shall have 05 nos of 250A, 25KA, FP MCCB and 07 nos of 63A, 25KA, FP
MCCB as outgoing. All outgoing feeders shall be provided Meter with ammeter, voltmeter & with
communication cable and ready RS485 port and Modbus protocol.
23 BAH-ELEC-FA-10 SITC of UPS PANEL 1 As per SLD 1.00 Nos 10,45,000.00 10,45,000.00
UPS Panel-1 comprising of 03 nos. of 500 amps, 35KA, FP MCCB with surge protection devise as mentioned
as incomer with 1600 amps TP+2N (35 KA for 1 sec.) , 415V, 50Hz, AC, AL bus bars. Panel shall have 03 nos.
of 630A, 35KA, TPN MCCB, 01 no of 400A, 35KA, FP MCCB , 03 no of 250A, 35KA, FP MCCB and 01 nos. of
63A, 35KA, FP MCCB as outgoing.
24 BAH-ELEC-FA-13 SITC of OT PANEL-1 As per SLD 1.00 Nos 14,70,000.00 14,70,000.00
OT Panel-1 comprising 320 Amps, 4 pole, 35KA, ATS suitable 25 kA/1sec. system fault level as per
specification.ASCO 7000 series and 320A, 35KA, TPN MCCB with voltmeter & ammeter as incomer with 320
amps 4 pole (35 KA for 1 sec.) , 415V, 50Hz, AC, AL bus bars. Panel shall have 13 nos. of 80 amps, DP MCB
with Surge protection device per feeder as specified and 2 nos. of 80 amps, DP MCB as outgoing.
25 BAH-ELEC-FA-14 SITC of OT PANEL-2 As per SLD 1.00 Nos 7,18,489.00 7,18,489.00

OT Panel-2 comprising 100 Amps, 4 pole, 35KA, ATS suitable 25 kA/1sec. system fault level as per
specification.ASCO 7000 series and 100A, 35KA, TPN MCCB with voltmeter & ammeter as incomer with 100
amps 4 pole (25 KA for 1 sec.) , 415V, 50Hz, AC, AL bus bars. Panel shall have 6 nos. of 80 amps, DP MCB
with Surge protection device per feeder as specified and 2 nos. of 80 amps, DP MCB as outgoing.
Page 4 of 55
S/I/T/C
TOTAL AMOUNT
26 BAH-ELEC-FA-15 SITC of CSSD PANEL As per SLD 1.00 Nos 2,50,000.00 2,50,000.00
CSSD Panel comprising 400 amps, 25KA, TPN, MCCB as incomer including Meter with ammeter, voltmeter &
with communication cable and ready RS485 port and Modbus protocol including 400 amps 4 pole (25 KA
for 1 sec.) , 415V, 50Hz, AC, AL bus bars. Panel shall have 09 nos of 63A, 10KA, TPN MCB, 01 no. of 40A,
10KA, TPN MCB, 04no. of 32A, 10KA, TPN MCB, 01 no. of 25A, 10KA, TPN MCB as outgoing.
27 BAH-ELEC-FA-19 SITC of KITCHEN PANEL As per SLD 1.00 Nos 2,30,000.00 2,30,000.00
PANTREY PANEL Panel comprising of 400 amps, 35KA, TPN, MCCB with voltmeter & ammeter as incomer
with 400 amps 4 pole (35 KA for 1 sec.) , 415V, 50Hz, AC, AL bus bars. Panel shall have 10 nos. of 40A, TPN
MCB, as outgoing.
28 BAH-ELEC-FA-21 SITC of LIGHTING & POWER PANEL As per SLD 2.00 Nos 3,50,000.00 7,00,000.00
NON DG PANEL 3rd QUADRANT Panel comprising of 400 amps, 35KA, TPN, MCCB with voltmeter &
ammeter as incomer with 400 amps 4 pole (35 KA for 1 sec.) , 415V, 50Hz, AC, AL bus bars. Panel shall have
02 nos. of 250A, TP MCCB, 11 nos of 80A, TPN MCB, 03 no. of 63A, TPN MCCB, as outgoing.
29 BAH-ELEC-FA-26 SITC of LIFT PANEL As per SLD 2.00 Nos 2,10,000.00 4,20,000.00
LIFT Panel comprising of 320 amps, 35KA, TPN, MCCB with voltmeter & ammeter as incomer with 320 amps
4 pole (35 KA for 1 sec.) , 415V, 50Hz, AC, AL bus bars. Panel shall have 04 nos of 100A TPN MCB, 01 no. of
63A, TPN MCB, 01 no. of 40A, TPN MCB, 05 no. of 32A, TPN MCB, 03 no. of 20A, TPN MCB as outgoing.
Supplying,erecting & making 500A FP MCCB,35KA+TVSS BOX with 1.6 mm thick CRCA sheet steel enclosure
30 RBH18-ELEC-FA-28 5.00 Nos 1,32,559.00 6,62,795.00
of approved make design.
31 RBH18-ELEC-FA-29 1.00 Nos 1,06,403.32 1,06,403.32
32 RBH18-ELEC-FA-30 2.00 Nos 71,518.64 1,43,037.28
33 RBH18-ELEC-FA-31 3.00 Nos 71,518.64 2,14,555.92
Supplying,erecting & making 150/160A FP ATS,25KA (Asco - 230series) with 1.6 mm thick CRCA sheet steel
34 RBH18-ELEC-FA-37 1.00 Nos 83,250.88 83,250.88
enclosure of approved make design.
Supplying,erecting & making 200A FP ATS,25KA (Asco - 230series) with 1.6 mm thick CRCA sheet steel
35 RBH18-ELEC-FA-38 1.00 Nos 91,179.48 91,179.48
36 RBH18-ELEC-FA-39 1.00 Nos 95,143.20 95,143.20
Page 5 of 55
S/I/T/C
TOTAL AMOUNT
Supply, Installation, testing and connection of 3P4W+50%E internally earthed Al. Bus duct as per rating
given below with all necessary fabrication of supports and other accessories works complete as per
specification. All joints / tees / bends / phase change over boxes/ Flange End/Horizontal Bend/Vertical
Bend/Plug-in Point/ Vertical Spring Hanger/Fix hanger/ End Cover/ Horizontal Fixing Clips/Tinned Copper
Braided Flexibles -360mm (with Hardware - Nuts and Bolts) etc are deemed to be included in the Rmt
supply. - Sandwich type - IP 55 unless otherwise specified in item. Minimum fault level of Bus duct shall be as
per panel but bot less then 35 kA. Arrangement for tapping earth as per requirement & approved shop
drawings.All necessary supports & work for installation of busduct shall be included in quoted cost.All joint
in horizontal ran shall have ip65 protection.Type test Certificates are from ERDA (ASTA Accredited) lab as per
IEC 61439 Part 1 and 6 Temperature rise design as per Latest IEC 61439 Part 1 and 6
37 MTAR-EL-14 2500 amps 50KA SC for 1 sec 150.00 Mtr 68,970.00 1,03,45,500.00
SITC of 415V/690V/1000V Sandwich construction Busbar trunking system with Multilayer Class-F insulation
and; Conductors : Aluminium Rating : 630A Configuration : 3P4W+50%E IP Rating : IP54 Enclosure : GI
38 BAH-ELEC-FA-29 120.00 Mtr 48,393.00 58,07,160.00
1.6mm thickness Impulse Withstand Voltage : 8kV Paint Shade : RAL7032 Epoxy Powder Coating Straight Run
Feeder IP55
39 BAH-ELEC-FA-30 60.00 Mtr 38,742.00 23,24,520.00
1.6mm thickness Impulse Withstand Voltage : 8kV Paint Shade : RAL7032 Epoxy Powder Coating Straight Run
Feeder IP55
SITC of Feed units in following ratings for above Rising main. 1 Nos. 630A, 415V, Ics=35kA, 4P MCCB with a
set of CT's., Multi Function meter (V, A, kWh, KVAh, KW, KVA, KVAR, PF, Hz.) with Phase Indicating Lamps
40 BAH-ELEC-FA-32 with MCB. End feed Panel with switchgear ( Suitable for MCCB ) - Al Busbar Arrangement , Complete with 3.00 Nos 1,45,000.00 4,35,000.00
Aluminium busbar or Cu Flexible with provision for rotary handle mechanism with bottom Cable entry and
top Busduct outgoing provision.
SITC of tap off boxes with MCCBs. All MCCBs shall be with thermal magnetic adjustable releases for O/L and
S/C. The MCCBs shall have Ics = 100% Icu. All tap of boxes shall support the cable sizes given in SLD along
with tender.
43 BAH-ELEC-FA-35 160/200 A,FP,25KA. 2.00 Nos 21,793.00 43,586.00
Page 6 of 55
S/I/T/C
TOTAL AMOUNT
44 BAH-ELEC-FA-36 125 A,FP,25KA. 3.00 Nos 14,800.00 44,400.00
47 BAH-ELEC-FA-39 63 A,FP,25KA. 12.00 Nos 10,500.00 1,26,000.00
48 BAH-ELEC-FA-40 40 A,FP,25KA. 50.00 Nos 10,500.00 5,25,000.00
SITC of Plug-in Box with Mechanical Interlocking suitable for L&T MCCB but without Switchgear standard
49 BAH-ELEC-FA-41 33.00 Nos 13,435.00 4,43,355.00
size for 16A to 100A
SITC of Plug-in Box with Mechanical Interlocking suitable for L&T MCCB but without Switchgear standard
50 BAH-ELEC-FA-42 10.00 Nos 9,485.00 94,850.00
size For 125A to 250A
Excavating the trenches and refilling,reinstatement of the same after the cable is laid in approved manner
51 R2-ME-2-8 200.00 Cu. Mtr. 307.00 61,400.00
(750 mm deep, 600 mm wide),in all types of soils 1 Cu. Mtr. = 2.2 RMT.
Excavating the trenches and refilling the same after the cable is laid in approved manner (Size of trench: 750
52 R2-ME-2-9 mm deep, 600 mm wide) in concrete/ masonary / asphalt. 1 Cu. Mtr. = 2.2 RMT. And reinstatement. 500.00 Cu. Mtr. 500.00 2,50,000.00
G.I. Cable tray with all other accessories : Perforated Type

Readymade 2500mm standard length, prefabricated, perforated cable tray from MS sheet and then hot dip
galvanised, of following sizes and associated accessories such as coupler plates, tees, elbow etc.
Galvanisation thickness shall be minimum 86 Micron.
53 R2-ME-2-13-a 75 x 25mm (W x H) - (16 SWG - 1.6mm) without cover 120.00 Mtr 1,074.00 1,28,880.00
54 R2-ME-2-13-b 100 x 25mm (W x H) - (16 SWG - 1.6mm) without cover 600.00 Mtr 1,197.00 7,18,200.00
55 R2-ME-2-13-c 150 x 25mm (W x H) - (16 SWG - 1.6mm) without cover 500.00 Mtr 1,237.00 6,18,500.00
56 R2-ME-2-13-d 200 x 50mm (W x H) - (16 SWG - 1.6mm) without cover 200.00 Mtr 1,522.00 3,04,400.00
57 R2-ME-2-13-e 300 x 50mm (W x H) - (16 SWG - 1.6mm) without cover 750.00 Mtr 2,067.00 15,50,250.00
58 R2-ME-2-13-k 450 x 75mm (W x H) - (14SWG - 2mm) without cover 200.00 Mtr 3,533.00 7,06,600.00
59 R2-ME-2-13-l 600 x 75mm (W x H) - (14SWG - 2mm) without cover 200.00 Mtr 4,167.00 8,33,400.00
G.I. Cable tray with all other accessories : Ladder Type
Readymade 2500mm standard length, prefabricated, Ladder type cable tray from MS sheet and then hot dip
galvanised, of following sizes and associated accessories such as coupler plates, tees, elbow etc. 50 mm side
flanges shall be provided. Galvanisation thickness shall be minimum 86 Micron.
60 R2-ME-2-14-f 750 x 75mm (W x H) - (12SWG - 2.5mm) 100.00 Mtr 1,086.00 1,08,600.00
61 R2-ME-2-14-g 1000 x 75mm (W x H) - (12SWG - 2.5mm) 50.00 Mtr 1,236.00 61,800.00
CABLES, EXCAVATION, G.I. CABLE TRAYS & ACCESSORIES, CABLE JOINTS, CABLE PROTECTION PIPE.
Page 7 of 55
S/I/T/C
TOTAL AMOUNT
G.I. Trunking / Duct / Raceway & all other accessories
Readymade 2500mm standard length, prefabricated, GI trunking from MS sheet and then hot dip galvanised,
of following sizes and associated accessories such as coupler plates, tees, elbow etc. 50 mm side flanges shall
be provided. Galvanisation thickness shall be minimum 86 Micron. cost of trunking shall be included junction
box of suitable size, and all other accessories required to complete the work.
62 R2-ME-2-15-c 100 x 40mm (W x H) - (14 SWG - 2mm) with cover without partition 400.00 Mtr 690.00 2,76,000.00
63 R2-ME-2-15-d 150 x 40mm (W x H) - (14 SWG - 2mm) with cover without partition 500.00 Mtr 906.00 4,53,000.00
64 R2-ME-2-15-e 300 x 40mm (W x H) - (14 SWG - 2mm) with cover without partition 250.00 Mtr 1,498.00 3,74,500.00
PVC Trunking with cover & all other accessories
Following sizes PVC trunking with cover and all other accessories to complete the work like bend, partion,
internal and external angles etc. cost of trunking shall be included base, cover, finishing accessories, junction
boxes and mounting wiring accessories.
65 R2-ME-2-16-a 50 x 50mm (W x H) - PVC Trunking with cover 120.00 Mtr 280.00 33,600.00
66 R2-ME-2-16-b 80 x 50 mm (W x H) - PVC Trunking with cover 120.00 Mtr 676.00 81,120.00
67 R2-ME-2-16-c 100 x 50mm (W x H) - PVC Trunking with cover 200.00 Mtr 1,090.00 2,18,000.00
68 R2-ME-2-16-d 150 x 50mm (W x H) - PVC Trunking with cover 200.00 Mtr 2,129.00 4,25,800.00
SWITCHGEARS, MCB DB, PANELS

Distribution Board (Box only)
IP43 SPN & TPN Distribution board with metal door of various sizes on wall/ Column/ floor mounting, with
detachable gland plate, terminal connectors and other required hardware & fasteners. DB shall be designed
R2-ME-1-15
for incoming MCB & no. of outgoing MCB as per requirement or no. of outgoing way (Cost of the DBs will be
without MCB, MCCB & other acessories)
69 R2-ME-1-15-a IP43 8 Way SPN DB (4 + 4Way) 15.00 Nos 2,458.00 36,870.00
70 R2-ME-1-15-b IP43 12 Way SPN DB (4 + 8Way) 20.00 Nos 2,955.00 59,100.00
71 R2-ME-1-15-c IP43 16 Way SPN DB (4 + 12Way) 12.00 Nos 3,708.00 44,496.00
72 R2-ME-1-15-d IP43 4 Way TPN DB (8 + 12Way) 12.00 Nos 4,846.00 58,152.00
73 R2-ME-1-15-e IP43 6 Way SPN DB (8 + 18Way) 4.00 Nos 5,976.00 23,904.00
74 R2-ME-1-15-f IP43 8 Way SPN DB (8 + 24Way) 20.00 Nos 7,164.00 1,43,280.00
75 R2-ME-1-15-g IP43 12 Way SPN DB (8 + 36Way) 10.00 Nos 10,733.00 1,07,330.00
76 R2-ME-1-15-h IP43 16 Way SPN DB (8 + 48Way) 4.00 Nos 13,308.00 53,232.00
MCCB incomer and MCB outgoing Distribution Board
IP 43 & IP 30 Vertical TPN Distribution Board with Modular Incomer with Metal door (Box only) of of various
sizes on wall/ Column/ floor mounting, with detachable gland plate, terminal connectors and other required
R2-ME-1-16 hardware & fasteners. DB shall be designed with provision for MCCB as incomer & SP / TP MCB as outgoing
as per requirement. (Cost of the DBs will be without MCB, MCCB). DB shall be as per IS 8623- 1 & 3 / IEC
61439- 1 & 3.
77 R2-ME-1-16-a IP 43 4 Way MCCB DB (125/160A MCCB + 4Way TP MCB /12 Way SP MCB) 8.00 Nos 14,396.00 1,15,168.00
78 R2-ME-1-16-b IP 43 4 Way MCCB DB (250A MCCB + 4Way TP MCB /12 Way SP MCB) 2.00 Nos 26,651.00 53,302.00
Page 8 of 55
S/I/T/C
TOTAL AMOUNT
79 R2-ME-1-16-c IP 43 8 Way MCCB DB (125/160A MCCB + 8Way TP MCB /24 Way SP MCB) 8.00 Nos 17,998.00 1,43,984.00
80 R2-ME-1-16-d IP 43 8 Way MCCB DB (250A MCCB + 8Way TP MCB /24 Way SP MCB) 2.00 Nos 31,119.00 62,238.00
81 R2-ME-1-16-e IP 43 12 Way MCCB DB (125/160A MCCB + 12Way TP MCB /36 Way SP MCB) 5.00 Nos 24,072.00 1,20,360.00
82 R2-ME-1-16-f IP 43 12 Way MCCB DB (250A MCCB + 12Way TP MCB /36 Way SP MCB) 2.00 Nos 32,796.00 65,592.00
Supply, installation, testing & commissioning of distribution boards, 12 way VTPN type DB with door
83 R2-ME-1-15-l 4.00 Nos 20,443.00 81,772.00
84 R2-ME-1-15-m 10.00 Nos 15,195.00 1,51,950.00
85 R2-ME-1-15-n 21.00 Nos 11,946.00 2,50,866.00
86 R2-ME-1-15-ag IP 43 TPN Distribution Board with metal door (Box only) 4 Way ( 4 + 12 way) 8.00 Nos 5,279.00 42,232.00
87 R2-ME-1-15-ai IP 43 TPN Distribution Board with metal door (Box only) 6 Way ( 8 + 18 way) 8.00 Nos 6,866.00 54,928.00
88 R2-ME-1-15-aj IP 43 TPN Distribution Board with metal door (Box only) 8 Way ( 8 + 24 way) 16.00 Nos 8,176.00 1,30,816.00
89 R2-ME-1-15-ak IP 43 TPN Distribution Board with metal door (Box only) 12 Way ( 8 + 36 way) 60.00 Nos 12,209.00 7,32,540.00
MCB
Unit rate of 240V/415V, 'C' Curve, 10kA, Miniature circuit breaker suitable for DB mounting complete with
R2-ME-1-17
connection, testing & commissioning etc. as required.
90 R2-ME-1-17-b 10A SP MCB 1,060.00 Nos 335.00 3,55,100.00
91 R2-ME-1-17-c 16A/20A SP MCB 552.00 Nos 335.00 1,84,920.00
92 R2-ME-1-17-d 32A SP MCB 10.00 Nos 335.00 3,350.00
93 R2-ME-1-17-g 10A DP MCB 20.00 Nos 995.00 19,900.00
94 R2-ME-1-17-h 16A/20A DP MCB 20.00 Nos 995.00 19,900.00
95 R2-ME-1-17-i 32A DP MCB 250.00 Nos 995.00 2,48,750.00
96 R2-ME-1-17-j 63A DP MCB 40.00 Nos 1,600.00 64,000.00
97 R2-ME-1-17-k 10A TP MCB 60.00 Nos 1,621.00 97,260.00
98 R2-ME-1-17-l 16A/20A TP MCB 100.00 Nos 1,621.00 1,62,100.00
99 R2-ME-1-17-m 32A TP MCB 10.00 Nos 1,621.00 16,210.00
100 R2-ME-1-17-n 63A TP MCB 10.00 Nos 2,478.00 24,780.00
101 R2-ME-1-17-t 10A 4P MCB 2.00 Nos 2,193.00 4,386.00
102 R2-ME-1-17-u 16A/20A 4P MCB 60.00 Nos 2,193.00 1,31,580.00
103 R2-ME-1-17-aj 25A FP MCB 10.00 Nos 2,360.00 23,600.00
104 R2-ME-1-17-v 32A 4P MCB 45.00 Nos 2,193.00 98,685.00
105 R2-ME-1-17-w 63A 4P MCB 97.00 Nos 3,161.00 3,06,617.00
106 R2-ME-1-17-ap MCB 'C' Curve, 15kA - 80A FP MCB 1.00 Nos 14,635.00 14,635.00
MCCB
Unit rate of 415V, 10kA/16kA, Moulded case circuit breaker with Thermal magnetic overload suitable for DB
R2-ME-1-18
mounting complete with connection, testing & commissioning etc. as required.
107 R2-ME-1-18-c 100A 4P MCCB 5.00 Nos 5,299.00 26,495.00
Page 9 of 55
S/I/T/C
TOTAL AMOUNT
108 R2-ME-1-18-d 125A 4P MCCB 6.00 Nos 8,887.00 53,322.00
109 R2-ME-1-18-f 160A 4P MCCB 4.00 Nos 10,961.00 43,844.00
110 R2-ME-1-18-h 200A 4P MCCB 1.00 Nos 8,628.00 8,628.00
111 R2-ME-1-18-i 250A TPN MCCB 1.00 Nos 18,233.00 18,233.00
MCBs in 16SWG sheet steel metal box
MCBs In 16 SWG CRCA sheet steel enclosure, powder coated, wall / column mounted with provision for
support arrangement, 2 earthing terminal, Incoming & outgoing cable terminal etc. with required hardware
R2-ME-1-19
& fasteners. All MCBs shall be rated for 10kA, 'C' curve type. Colour shade shall be RAL 7032 Smoke gray as
per IS 5. IP 43 Enclosure.
112 R2-ME-1-19-a 16/32 Amp. DP MCB 20.00 Nos 2,974.00 59,480.00
113 R2-ME-1-19-b 16/32 Amp. TPN MCB 20.00 Nos 4,174.00 83,480.00
114 R2-ME-1-19-c 63 Amp. TPN MCB 20.00 Nos 5,143.00 1,02,860.00
115 R2-ME-1-19-d 20Amp SP MCB with 20A ray roll type, 3pin plug & socket with cap & chain etc. 40.00 Nos 2,121.00 84,840.00
116 R2-ME-1-19-e 32Amp TPN MCB with 32A ray roll type, 5pin plug & socket with cap & chain etc. 40.00 Nos 6,769.00 2,70,760.00
Earth Leakage circuit Breaker / Residual Current circuit Breaker
ELCBs In 16 SWG CRCA sheet steel enclosure, powder coated, wall / column mounted with provision for
R2-ME-1-25 support arrangement, 2 earthing terminal, Incoming & outgoing cable terminal etc. Colour shade shall be
RAL 7032 Smoke gray as per IS 5.
with 300mA Sensitivity
117 R2-ME-1-25-m 25Amp. 2Pole 2.00 Nos 4,509.00 9,018.00
118 R2-ME-1-25-n 40Amp. 2Pole 20.00 Nos 5,079.00 1,01,580.00
119 R2-ME-1-25-n1 63Amp. 2Pole 291.00 Nos 6,064.00 17,64,624.00
120 R2-ME-1-25-p 40Amp. 4Pole 4.00 Nos 5,917.00 23,668.00
121 R2-ME-1-25-q 63Amp. 4Pole 6.00 Nos 6,707.00 40,242.00
122 R2-ME-1-25-a 16Amp. 2Pole ELCB 10.00 Nos 4,355.00 43,550.00
123 R2-ME-1-25-b 25Amp. 2Pole ELCB 10.00 Nos 4,509.00 45,090.00
124 R2-ME-1-25-c 40Amp. 2Pole ELCB 10.00 Nos 5,079.00 50,790.00
125 R2-ME-1-25-d 16Amp. 4Pole ELCB 5.00 Nos 5,364.00 26,820.00
126 R2-ME-1-25-e 25Amp. 4Pole ELCB 5.00 Nos 5,844.00 29,220.00
127 R2-ME-1-25-f 40Amp. 4Pole ELCB 5.00 Nos 5,917.00 29,585.00
128 R2-ME-1-25-g 63Amp. 4Pole ELCB 5.00 Nos 6,707.00 33,535.00
129 R2-ME-1-25-h 25Amp. 2Pole 5.00 Nos 4,355.00 21,775.00
130 R2-ME-1-25-i 40Amp. 2Pole 30.00 Nos 4,843.00 1,45,290.00
131 R2-ME-1-25-j 25Amp. 4Pole 25.00 Nos 5,524.00 1,38,100.00
132 R2-ME-1-25-k 40Amp. 4Pole 25.00 Nos 5,698.00 1,42,450.00
133 R2-ME-1-25-l 63Amp. 4Pole 25.00 Nos 6,422.00 1,60,550.00
Providing, erecting & commissioning RCCB only of electro magnetic type with 30mA sensitivity and having
134 RBH18-PWD-5-6-3 8.00 Nos 3,252.00 26,016.00
capacity of 63 A. 2 pole complete as per specification No. SW- RCCB/RCCB
Page 10 of 55
S/I/T/C
TOTAL AMOUNT
Supply & fixing CRCA sheet box with earthing terminals for housing 2 pole RCCB/RCCB + MCB complate on
135 RBH18-PWD-5-6-15 80.00 Nos 226.00 18,080.00
iron frqme/laminated board.
136 RBH18-PWD-5-6-16 90.00 Nos 292.00 26,280.00
Supply, Laying of cables on cable trays, structural supports and cable supports provided, include unloading,
shifting upto site. The scope includes clamping of cables by ready made G.I. spacers, saddles or clamps
fabricated out of M.S. strip 3 mm thick, Treasing and Clamping of Cable on cable tray, supply of all clamping
materials and hardware etc., providing cable tags made out of aluminium strip and 75x20 mm in size with
cable number and size punched on it. Cable tags shall be tied to cables at every 10 meter interval and at
both the ends. All cables shall be of CU. FRLSZH category.
137 R2-ME-2-3a-d 6C x 1.5 Sq.mm Cu. FRLSZH Cable 400.00 Mtr 169.00 67,600.00
138 R2-ME-2-3a-h 6C x 2.5 Sq.mm Cu. FRLSZH Cable 400.00 Mtr 247.00 98,800.00
139 R2-ME-2-3a-f 3C x 2.5 Sq.mm Cu. FRLSZH Cable 2,500.00 Mtr 142.00 3,55,000.00
140 R2-ME-2-3a-j 3C x 4 Sq.mm Cu. FRLSZH Cable 3,500.00 Mtr 203.00 7,10,500.00
141 R2-ME-2-3a-n 3C x 6 Sq.mm Cu. FRLSZH Cable 250.00 Mtr 263.00 65,750.00
142 R2-ME-2-3a-r 3C x 10 Sq.mm Cu. FRLSZH Cable 100.00 Mtr 410.00 41,000.00
143 RBH18-ELEC-FA-56 3C x 16 Sq.mm Cu. FRLSZH Cable 500.00 Mtr 684.40 3,42,200.00
144 R2-ME-2-3a-g 4C x 2.5 Sq.mm Cu.FRLSZH Cable 2,000.00 Mtr 178.00 3,56,000.00
145 R2-ME-2-3a-k 4C x 4.0 Sq.mm Cu. FRLSZH Cable 1,200.00 Mtr 273.00 3,27,600.00
146 R2-ME-2-3a-o 4C x 6.0 Sq.mm Cu. FRLSZH Cable 2,000.00 Mtr 337.00 6,74,000.00
147 R2-ME-2-3a-s 4C x 10 Sq.mm Cu. FRLSZH Cable 700.00 Mtr 597.00 4,17,900.00
148 R2-ME-2-3a-u 4C x 16 Sq.mm Cu. FRLSZH Cable 750.00 Mtr 863.00 6,47,250.00
149 R2-ME-2-3a-v 4C x 25 Sq.mm Cu. FRLSZH Cable 175.00 Mtr 1,450.00 2,53,750.00
150 R2-ME-2-3a-w 3.5C x 35 Sq.mm Cu. FRLSZH Cable 1,000.00 Mtr 1,740.00 17,40,000.00
151 R2-ME-2-3a-x 3.5C x 50 Sq.mm Cu. FRLSZH Cable 1,200.00 Mtr 2,416.00 28,99,200.00
152 R2-ME-2-3a-y 3.5C x 70 Sq.mm Cu. FRLSZH Cable 500.00 Mtr 3,419.00 17,09,500.00
153 R2-ME-2-3a-z 3.5C x 95 Sq.mm Cu. FRLSZH Cable 500.00 Mtr 4,923.00 24,61,500.00
154 R2-ME-2-3a-aa 3.5C x 120 Sq.mm Cu.FRLSZH Cable 750.00 Mtr 6,309.00 47,31,750.00
155 R2-ME-2-3a-ab 3.5C x 150 Sq.mm Cu. FRLSZH Cable 650.00 Mtr 7,624.00 49,55,600.00
156 R2-ME-2-3a-ac 3.5C x 185 Sq.mm Cu. FRLSZH Cable 550.00 Mtr 9,510.00 52,30,500.00
157 R2-ME-2-3a-ad 3.5C x 240 Sq.mm Cu. FRLSZH Cable 750.00 Mtr 12,215.00 91,61,250.00
158 R2-ME-2-3a-ae 3.5C x300 Sq.mm Cu. FRLSZH Cable 700.00 Mtr 15,216.00 1,06,51,200.00
Page 11 of 55
S/I/T/C
TOTAL AMOUNT
Cable end terminations for LV, XLPE/PVC insulated, PVC sheathed, armoured/ unarmoured cables including
supply and fixing of Double compression cable glands, stripping of cable insulation, supply and fixing of
tinned plated copper lugs for copper cables for all phases and crimping the same to the conductor for the
following cables. Miscellaneous items like cable lugs, G.I nut - bolts and G.I washers , consumables and other
hardware materials as required to make the installation complete, are in the scope. All G.I Nut, bolt and
washers shall be HDGI with 80 micron. One set of termination includes gland, lugs for cable core &
accessories
159 R2-ME-2-12-g 3C x 2.5 Sq.mm 40.00 Nos 113.00 4,520.00
160 R2-ME-2-12-h 3C x 4 Sq.mm 50.00 Nos 172.00 8,600.00
161 R2-ME-2-12-i 3C x 6 Sq.mm 70.00 Nos 176.00 12,320.00
162 R2-ME-2-12-k 3C x 10 Sq.mm 3.00 Nos 187.00 561.00
163 R2-ME-2-12-l 3C x 16 Sq.mm 40.00 Nos 332.00 13,280.00
164 R2-ME-2-12-p 4C x 2.5 Sq.mm 210.00 Nos 173.00 36,330.00
165 R2-ME-2-12-q 4C x 4 Sq.mm 500.00 Nos 179.00 89,500.00
166 R2-ME-2-12-r 4C x 6 Sq.mm 300.00 Nos 186.00 55,800.00
167 R2-ME-2-12-s 4C x 10 Sq.mm 120.00 Nos 199.00 23,880.00
168 R2-ME-2-12-t 4C x 16 Sq.mm 80.00 Nos 349.00 27,920.00
169 R2-ME-2-12-u 4C x 25 Sq.mm 50.00 Nos 360.00 18,000.00
170 R2-ME-2-12-v 3.5C x 35 Sq.mm 60.00 Nos 363.00 21,780.00
171 R2-ME-2-12-w 3.5C x 50 Sq.mm 60.00 Nos 465.00 27,900.00
172 R2-ME-2-12-x 3.5C x 70 Sq.mm 20.00 Nos 602.00 12,040.00
173 R2-ME-2-12-y 3.5C x 95 Sq.mm 28.00 Nos 1,188.00 33,264.00
174 R2-ME-2-12-z 3.5C x 120 Sq.mm 46.00 Nos 1,301.00 59,846.00
175 R2-ME-2-12-aa 3.5C x 150 Sq.mm 16.00 Nos 1,657.00 26,512.00
176 R2-ME-2-12-ab 3.5C x 185 Sq.mm 10.00 Nos 2,110.00 21,100.00
177 R2-ME-2-12-ac 3.5C x 240 Sq.mm 20.00 Nos 2,797.00 55,940.00
178 R2-ME-2-12-ad 3.5C x 300 Sq.mm 226.00 Nos 3,805.00 8,59,930.00
179 R2-ME-2-12-ae 3.5C x 400 Sq.mm 3.00 Nos 5,759.00 17,277.00
180 R2-ME-2-12-af 6C x 1.5Sq.mm 20.00 Nos 179.00 3,580.00
181 R2-ME-2-12-ag 6C x 2.5 Sq.mm 20.00 Nos 183.00 3,660.00
1.8 Modular switches and Accessories
Supplying and erecting modular type switch 6A / 10A ISI mark approved make duly erected on provided
182 RBH18-PWD-1-8-1 250.00 Nos 89.00 22,250.00
plate and box with wiring connections complete.
Supplying and erecting modular type switch one way 16 / 20 A, ISI mark, approved make duly erected on
183 RBH18-PWD-1-8-7 2,550.00 Nos 146.00 3,72,300.00
provided plate and box with wiring connections complete with neon indicator.
Supplying and erecting modular type 3 pin 6A multi socket with safety shutter ISI mark approved make duly
184 RBH18-PWD-1-8-10 200.00 Nos 116.00 23,200.00
erected on provided plate and box with wiring connections complete.
Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter ISI mark approved
185 RBH18-PWD-1-8-11 2,420.00 Nos 179.00 4,33,180.00
make duly erected on provided plate and box with wiring connections complete.
Page 12 of 55
S/I/T/C
TOTAL AMOUNT
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3
186 RBH18-PWD-1-8-37 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per 2,480.00 Nos 273.00 6,77,040.00
required to match the background in an approved manner.
MAINS AND SUBMAINS WIRING, POINT WIRINGWIRING FOR SUBMAINS/ CIRCUIT WIRING
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLSZH insulated copper
R2-ME-3-21
conductor wire in surface/ recessed medium class PVC conduit as required
187 R2-ME-3-21-a 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire in 20mm Conduit 74,200.00 Mtr 116.00 86,07,200.00
188 R2-ME-3-21-b 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire in 20mm Conduit 51,200.00 Mtr 159.00 81,40,800.00
189 R2-ME-3-21-c 2 X 4 sq. mm + 1 X 4 sq. mm earth wire in 25mm Conduit 29,540.00 Mtr 231.00 68,23,740.00
190 R2-ME-3-21-d 2 X 6 sq. mm + 1 X 6 sq. mm earth wire in 25mm Conduit 450.00 Mtr 317.00 1,42,650.00
191 R2-ME-3-21-k 4 X 4 sq. mm + 2 X 4 sq. mm earth wire in 38mm Conduit 450.00 Mtr 431.00 1,93,950.00
192 R2-ME-3-1-l 4 X 6 sq. mm + 2 X 6 sq. mm earth wire in 38mm Conduit 485.00 Mtr 532.00 2,58,020.00
193 R2-ME-3-21-m 4 X 10 sq. mm + 2 X 10 sq. mm earth wire in 38mm Conduit 450.00 Mtr 902.00 4,05,900.00
Point wiring by using FRLSZH insulated copper conductors (along with same size of FRLSZH insulated
R2-ME-3-42
copper conductor for earthing & 3 plate ceiling rose) using PVC CONDUIT
194 R2-ME-3-42-a Light /Fan / Ex. fan Points 5,500.00 Each Pt. 799.00 43,94,500.00
195 R2-ME-3-42-k Group Control Point Wiring 4-8 Points Controlled by One 15 A SP Switch 124.00 Each Pt. 419.00 51,956.00
196 R2-ME-3-42-j 5A/6A - 3/5 Pin Plug On Board 76.00 Each Pt. 188.00 14,288.00
15 / 5 A / 6 A Combined Power Plug Socket Point with Fuse and Indicating Lamp, One 15 Amp SP Switch
197 R2-ME-3-42-i 76.00 Each Pt. 1,346.00 1,02,296.00
198 R2-ME-3-42-b 2/3 Pin Independent Plug (IP) 126.00 Each Pt. 842.00 1,06,092.00
R2-ME-3-45 copper conductor for earthing & 3 plate ceiling rose) using CONCEALED MANNER (WITH PVC
CONDUIT PIPES, M.S. BOXES ETC.) POINTS
199 R2-ME-3-45-a Light /Fan / Ex. fan Points 250.00 Each Pt. 881.00 2,20,250.00
200 R2-ME-3-45-b 2/3 Pin Independent Plug (IP) 600.00 Each Pt. 909.00 5,45,400.00
15 / 5 A / 6 A Combined Power Plug Socket Point with
201 R2-ME-3-45-i 400.00 Each Pt. 1,458.00 5,83,200.00
Fuse and Indicating Lamp, One 15 Amp SP Switch
202 R2-ME-3-45-j 5A/6A - 3/5 Pin Plug On Board 700.00 Each Pt. 193.00 1,35,100.00
203 R2-ME-3-45-k Group Control Point Wiring 4-8 Points Controlled by One 15 A SP Switch 500.00 Each Pt. 453.00 2,26,500.00
204 R2-ME-3-45-c Bell Point with Bell / Buzzer & 1 Bell Push 10.00 Each Pt. 1,245.00 12,450.00
205 R2-ME-3-45-d Bell Point With Bell / Buzzer with 1 Bell Push & 1 Indicator 10.00 Each Pt. 1,307.00 13,070.00
Point wiring by using FRLSZH insulated copper conductors (alongwith same size of FRLSZH insulated
copper conductor for earthing & 3 plate ceiling rose) : PVC conduit concealed with modular switches
& FRLSZH wires.
206 R2-ME-3-26-b 3/5 Pin Independent Plug (IP) Concealed Manner with Modular switches & FRLSZH wires 100.00 Each Pt. 992.00 99,200.00
207 R2-ME-3-26-c 5A/6A - 3/5 Half Plug Concealed Manner with Modular switches & FRLSZH wires 710.00 Each Pt. 278.00 1,97,380.00
16SWG GI Junction Box Complete with Earthing terminal, Interconnection & wiring
Page 13 of 55
S/I/T/C
TOTAL AMOUNT
16 SWG G I Junction Box of various sizes For loop in loop out cables. Junction box shall have suitable no. of
knock out for incoming & outgoing cables. Cables shall be terminated in 10A heavy duty connector. Cost of
the connector shall be included in the cost of Junction box. Colour shade shall be RAL 7032 Siemens gray as
per IS 5. (IP55)
100mm x 100mm x 50mm size GI Junction box with knock out & 1 No. 5Amp. SP switch & 5 Amp. Three Pin
208 R2-ME-1-20-e 200.00 Nos 131.00 26,200.00
Socket for local Isolation
MAINS : - for three - single phase industrial sockets / D.B. to D.B. / panel to UPS and UPS to UPS DB
1.1 KV GRADE COPPER FLEXIBLE WIRE WITH SINGLE PVC INSULATED "METER LEADS" COMPLETE
WITH FLEXIBLE PVC CONDUIT, END TERMINATIONS, CLIPPINGS ETC.:
1.1 kV grade 2 nos. (P+N) copper conductor flexible cable of area 4.0 sq mm and 1no. (E) 2.5 sq. mm copper
209 R2-ME-1-10-c 10.00 Mtr 458.00 4,580.00
cable for 30/32 Amp. single phase switch.
1.1 kV grade 4 nos. (3P+N) copper conductor flexible cable of area 6.0 sq mm and 1no. (E) 2.5 sq. mm
210 R2-ME-1-10-d 250.00 Mtr 848.00 2,12,000.00
copper cable for 30 /32 Amp. three phase switch.
3(PH) nos. single core Cu PVC insulated flexible cable of 25 Sq.mm. for phases & 1 single core Cu PVC
211 R2-ME-1-10-e 300.00 Mtr 1,468.00 4,40,400.00
insulated flexible cable for neutral of 10 Sq.mm. for 63 Amp TPNSS switch.
3 nos. single core Cu PVC insulated flexible cable of 50 Sq.mm. for phases & 1 single core Cu PVC insulated
212 R2-ME-1-10-f 70.00 Mtr 3,038.00 2,12,660.00
flexible cable for Neutral of 25 Sq.mm for 100/125 Amp. TPNSS switch.
213 R2-ME-1-10-g 350.00 Mtr 5,791.00 20,26,850.00
flexible cable for neutral of 50 Sq.mm for 200 Amp TPNSS switch.
214 R2-ME-1-10-h 500.00 Mtr 9,100.00 45,50,000.00
flexible cable for neutral of 70 Sq.mm for 250 Amp TPNSS switch.
215 R2-ME-1-10-j 250.00 Mtr 15,261.00 38,15,250.00
flexible cable for neutral of 150 Sq.mm for 400 Amp. TPNSS switch.
Supplying & erecting I.S.I. mark Rigid P.V.C. conduit 25 mm. dia. with necessary accessories in wall/floor with
216 RBH18-PWD-1-1-9 15,000.00 Mtr 132.00 19,80,000.00
chiselling appropriately as per specification No: WG-MA/CC, para no. 1.2.1
Suppling & laying Rigid PVC conduit 25 mm Dia with necessary accessories in RCC work/false
217 RBH18-PWD-1-1-10 4,000.00 Mtr 107.00 4,28,000.00
ceiling/false flooring as per specification No. WG-MA/CC, para no. 1.2.1
Supplying & erecting I.S.I. mark Rigid P.V.C. conduit 32 mm. dia. with necessary accessories in wall/floor
218 RBH18-PWD-1-1-11 3,000.00 Mtr 169.00 5,07,000.00
with chiselling appropriately as per specification No: WG-MA/CC, para no. 1.2.1
Supplying and erecting UPVC reinforced flexible conduit 20 mm in dia. conforming to I.S. and approved
219 RBH18-PWD-1-2-2 150.00 Mtr 89.00 13,350.00
make with required number of couplings, PVC bushes, check nuts etc. complete.
220 RBH18-PWD-1-2-3 120.00 Mtr 101.00 12,120.00
221 RBH18-PWD-1-2-6 120.00 Mtr 194.00 23,280.00
General indoor fittings (FG-IDF)
1x28W, T-5 Fixtures, comprises of M.S. powder coated with end cap. The fixtures complete with high
R2-ME-4-5-a efficiency electronics ballast (THD<33%) & PF > 0.95, omplete with bright reflector & T-5 lamp. 10.00 Nos 1,919.00 19,190.00
Page 14 of 55
S/I/T/C
TOTAL AMOUNT
222 R2-ME-4-34-a 1X 18W 50.00 Nos 538.00 26,900.00
223 R2-ME-4-34-b 2X 18W 180.00 Nos 1,076.00 1,93,680.00
224 R2-ME-4-32-b SITC of Downlighter/Wall mounted LED:-9-10 W 900.00 Nos 585.00 5,26,500.00
225 R2-ME-4-32-c SITC of Downlighter/Wall mounted LED:- 12 -13W 3,500.00 Nos 698.00 24,43,000.00
226 R2-ME-4-32-d SITC of Downlighter/Wall mounted LED:-13-18 W 302.00 Nos 754.00 2,27,708.00
Supplying and erecting square shaped CRCA / die-cast aluminium powder coated housing LED Panel light
227 RBH18-PWD-2-5-8 150X150mm of PREMIUM RANGE suitable for upto 10 W with provision for plane front frame with 300.00 Nos 1,199.00 3,59,700.00
translucent cover fixed to the housing complete.
Supplying and erecting square shaped CRCA / die-cast aluminium powder coated housing LED Panel light
228 RBH18-PWD-2-5-13 600X600mm / 300X1200mm of PREMIUM RANGE suitable for upto 45 to 48 W with provision for plane front 700.00 Nos 4,196.00 29,37,200.00
frame with translucent cover fixed to the housing complete.
229 R2-ME-4-34-f LED flexible strip light 2 wire min of 4.8W 1,000.00 Mtr 962.00 9,62,000.00
230 R2-ME-4-34-g 4W integral driver LED Steplight - 1,000.00 Nos 1,874.00 18,74,000.00
Supplying and erecting LED concealed type foot / step light suitable upto 2 W LED including driver having
231 RBH18-PWD-2-5-15 365.00 Nos 575.00 2,09,875.00
fibre reinforced plastic housing as per specification no. FG-IDF/FL
Occupancy sensors Supply, installtion and termintion occupancy sensors with minimum 90 degrees x 5mtr
232 CE5-09-002-FAE179 200.00 Nos 3,770.00 7,54,000.00
detection range
LED Outdoor Fittings (FG-ODF/LED)
233 R2-ME-4-28-a SITC of LED Flood Light Fitting:- 150 W 10.00 Nos 11,547.00 1,15,470.00
234 R2-ME-4-28-b SITC of LED Flood Light Fitting:- 210 W 20.00 Nos 21,734.00 4,34,680.00
Aviation Light Fittings
Supplying & erecting aviation obstruction light consisting of yellow painted die-cast aluminium alloy
235 RBH18-ELEC-FA-58 housing, red coloured polycorbonate dome and accessories suitable for Twin light on provided bracket 4.00 Nos 6,058.68 24,234.72
complete.
Accessories for Fans (FG-FN)
236 R2-ME-4-12-s Fan safety rope/ Fan wire. 750.00 Nos 407.00 3,05,250.00
FANS (SP-ME-TS-28)
Ceiling fan of 600 mm sweep with all accessories including Electronic Regulator for completing installation as
237 R2-ME-4-12-a 10.00 Nos 2,508.00 25,080.00
per specification.
Ceiling fan of 900 mm sweep with all accessories including Electronic Regulator for completing installation as
238 R2-ME-4-12-b 200.00 Nos 2,508.00 5,01,600.00
per specification.
Ceiling fan of 1050 mm sweep with all accessories including Electronic Regulator for completing installation
239 R2-ME-4-12-c 10.00 Nos 2,508.00 25,080.00
as per specification.
240 R2-ME-4-12-d 200.00 Nos 2,508.00 5,01,600.00
241 R2-ME-4-12-i Exhaust fan of 305mm sweep, 900/1400RPM, with 750 CFM free air delivery, AC 230V/415V , 50 Hz, single 10.00 Nos 3,209.00 32,090.02
phase / three phase complete with all necessary accessories for completing installation as per specification.
LIGHTING FIXTURES, INVERTERS, FANS, WATER HEATERS.

Medical Examination lighting
Page 15 of 55
S/I/T/C
TOTAL AMOUNT
Medical examination lamp suitable for use with 60W GLS lamp. The lamp shall be provided with three arms,
adjustable swiveling, heavy duty ,telescopic. Arms shall be provided with nylon nuts and firm grip. Housing
241 RBH18-ELEC-FA-59 shall be made up of cast Al with spun Al reflector, on/off toggle switch, bakelite lamp holder and prewired 20.00 Nos 9,523.60 1,90,472.00
with twin core flexible copper cable . the lamp shall be suitable for use with 240V, 50Hz, Single phase AC
supply and wall mounting type. K-lite 3172 or equivalant.
T-5 Fixtures (SP-ME-TS-20)
242 R2-ME-4-31-c Garden Light Luminiare Bollard Type. 70.00 Nos 6,295.00 4,40,650.00
S' TYPE HOOK FOR CEILING FANS:
S' type M.S. fan hook fabricated from suitable dia. M.S. rod for fixing ceiling fan by using pair of Anchor
243 R2-ME-4-15-b 800.00 Nos 229.00 1,83,200.00
fastener.
FIXING OF CEILING FANS WITH EXTENDED 1/2" G.I./ M.S. PIPE WITH SHACKLE MOUNTING ETC.
WITH PAINTING:
Fixing of Ceiling fans with MS down rod, painting etc as required for completing installation as per
244 R2-ME-4-17
specification
245 R2-ME-4-17-c Above 1 mtr. to 1.5 Mtr. 800.00 Set 439.00 3,51,200.00
ELECTRONIC SIREN 220V A.C. AUDIBLE RANGE:
Electronic siren, single phase 230V AC,6000rpm , horizontal mounting , with weather shade with complete
246 R2-ME-4-18
installation as per specification.
247 R2-ME-4-18-b Audible range 1.0 km. 1.00 Nos 6,985.00 6,985.00
Standard Industrial type Fly killer with M.S. body, 4 X 20W tube and approx. area covered: 2000 sq.ft.
248 R2-ME-4-20-b 8.00 Nos 4,992.00 39,936.00
249 R2-ME-4-34-e LED Bulkhead fitting 250.00 Nos 1,162.00 2,90,500.00

HIGHMAST, POLES & ACCESSORIES
Poles : (As per IS 2713 - Part II 1980, Swedged pole made from steel of ultimate steel tensile 410 Mpa
(42 Kgf/Sq.mm.))(SP-ME-TS-13)
Providing & erecting 7 m high (clear height) galvanized OCTAGONAL pole with foundation bolts having
250 R2-ME-10-5-e 20.00 Nos 53,892.00 10,77,840.00
bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification
251 R2-ME-10-5-f 10.00 Nos 66,258.00 6,62,580.00
252 R2-ME-10-5-g 10.00 Nos 78,928.00 7,89,280.00
Brackets
Providing & erecting single arm standard bracket 1000MM long made up of 40 NB GI pipe suitable for
253 R2-ME-10-6-a 30.00 Nos 7,485.00 2,24,550.00
octagonal pole of having top dia 70 MM as per specification
Providing & erecting double arm standard bracket 1000MM long made up of 40 NB GI pipe suitable for
254 R2-ME-10-3-b 10.00 Nos 5,861.00 58,610.00
C.I.Junction Boxes
Page 16 of 55
S/I/T/C
TOTAL AMOUNT
Providing, fixing and connecting weather proof pole mounting cast iron box, hinged door with locking
arrangement, complete with MCB cutouts, terminal block mounting arrangement etc. Box shall be duly
painted in approved manner . Cost of painting is included in cost of C.I. Box.
Cast Iron Junction box complete with 2way terminal or connector block and 6A SP MCB. Box size shall not be
255 R2-ME-10-4-b 20.00 Nos 4,884.00 97,680.00
less than 6" x 5" (150 mm x 125 mm)
Cast Iron Junction box complete with c 2way terminal or connector block and 6A SP MCB. Box size shall not
256 R2-ME-10-4-c 20.00 Nos 6,056.00 1,21,120.00
be less than 8" x 5" (200 mm x 125 mm.)
257 R2-ME-4-27-e SITC of LED Street Light fittings:- 70-90 W 20.00 Nos 5,774.00 1,15,480.00
258 R2-ME-4-27-b SITC of LED Street Light fittings:- 24-36 W 20.00 Nos 2,223.00 44,460.00
259 R2-ME-4-27-c SITC of LED Street Light fittings:- 36-48 W 20.00 Nos 4,071.00 81,420.00
260 R2-ME-4-29-a SITC of LED Post top Lantern/ Handi type- 50 W with Pole 20.00 Nos 9,343.00 1,86,860.00
261 BAH-ELEC-FA-46 SITC of Shrub uplighter 8 to 13 watt led waterproof with all acessories etc. 35.00 Nos 3,500.00 1,22,500.00
262 BAH-ELEC-FA-47 SITC of Tree uplighter 8 to 13 watt led waterproof with all acessories etc. 35.00 Nos 3,800.00 1,33,000.00
Supplying and erecting LED flexible strip light 5m length upto 25W conforming IP 65 of any colour with
263 BAH-ELEC-RA-69 50.00 Nos 2,414.00 1,20,700.00
driver complete.
Supplying and erecting LED flexible strip light 5m length upto 75W conforming IP 65 of any colour with
264 BAH-ELEC-RA-70 50.00 Nos 5,170.00 2,58,500.00
driver complete.
Supply, Installation testing and commissioning of Bed head Light having 3 nos. 14W T5 + 1W LED with
265 RBH18-ELEC-FA-60 electronics ballast having <10% THD. The fix. Shall be of excluded Alluminium with powder coated IP-20. 250.00 Nos 6,164.24 15,41,060.00
Supply, Installation testing and commissioning of 2x26W CFL Suspended Light fixture. TRF226EB or approved
266 RBH18-ELEC-FA-61 10.00 Nos 5,137.64 51,376.40
equivalent
267 RBH18-ELEC-FA-62 Supply, Installation testing and commissioning of 40W LED 2' x 2' ft, Direct - Indirect Light fixture 150.00 Nos 7,021.48 10,53,222.00
EARTHING, LIGHTNING PROTECTION.

Earthing (SP-ME-TS-37)
600 X 600 X 3.15 mm Copper Plate, 3000mm dip with suitable size cu strip earth pit as per IS 3043. The earth
pit shall be provided with watering pipe (Class B) with wire messed funnel, 12 SWG cu wire upto chamber,
268 R2-ME-7-1-d disconnecting links with 600 x 600 mm (clear) RCC chamber & 3mm thick heavy duty CI chequered plate 30.00 Nos 23,434.00 7,03,020.00
cover with hinge. Bentonite shall be provided for earth pits. Excavation, backfilling, removal of excess soil is
included in the scope
Earthing station with 600 mm x 600 mm x 6 mm galvanised iron plate & 50 mm dia. G.I. pipe, 3000mm long
GI pipe (Class B or better) earth pit as per IS 3043. The earth pit shall be provided with watering pipe (Class
B) with wire messed funnel, 25x3 GI strip/ / 2X8SWG G.I. wire up to chamber (wire or strip size as per fault
269 R2-ME-7-1-c level), disconnecting links with 600 x 600 mm (clear) 50.00 Nos 17,789.00 8,89,450.00
RCC chamber & heavy duty 3mm thick CI chequered plate cover with hinge & stainless steel bolts.
Bentonite/ Charcol & Salt shall be provided for earth pits. Excavation, back filling, removal of excess soil is
Page 17 of 55
S/I/T/C
TOTAL AMOUNT
Test links
Supply and installation of following size Test Links with required wiring and other accessories to complete
the work.
270 R2-ME-7-3-c 25 x 3 mm Cu (length : 300 mm) 120.00 Nos 234.00 28,080.00
271 R2-ME-7-3-e 50 x 6 mm GI (length : 300 mm) 20.00 Nos 86.00 1,720.00
Earthing Continuity Conductors
Supply & installation of Earth conductor of the following sizes to be cleated on wall / columns with nuts &
bolts or laid in cable tray / buried in ground including cutting, drilling, tapping, jointing by welding,
connecting to equipments, painting to
welded portion by black bitumen paint and with all necesary GI
hardware & accessories to complete the work
272 R2-ME-7-4-a 25 x 3mm Tinned copper 295.00 Mtr 780.00 2,30,100.00
273 R2-ME-7-4-c 25 x 6mm Tinned copper 100.00 Mtr 1,568.00 1,56,800.00
274 R2-ME-7-4-d 50 x 6mm Tinned copper 350.00 Mtr 3,120.00 10,92,000.00
275 R2-ME-7-4-e 25 x 3mm GI 900.00 Mtr 49.00 44,100.00
276 R2-ME-7-4-f 25 x 6mm GI 5,500.00 Mtr 97.00 5,33,500.00
277 R2-ME-7-4-g 50 x 6mm GI 900.00 Mtr 195.00 1,75,500.00
278 R2-ME-7-4-k Bare Copper Conductor size 8 SWG 1,240.00 Mtr 125.00 1,55,000.00
279 R2-ME-7-4-m Bare G.I. Conductor size 8 SWG 3,500.00 Mtr 9.00 31,500.00
Supplying & erecting mains with 2x1.5 sq.mm F.R.L.S copper PVC insulated wire laid in provided
280 RBH18-PWD-1-3-4 conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG- MA/BW 150.00 Mtr 44.00 6,600.00
Supplying & erecting mains with 2x4 sq.mm F.R.L.S copper PVC insulated wire laid in provided
282 RBH18-PWD-1-3-8 4,000.00 Mtr 89.00 3,56,000.00
conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG- MA/BW
283 RBH18-PWD-1-3-10 170.00 Mtr 125.00 21,250.00
285 RBH18-PWD-1-3-20 200.00 Mtr 313.00 62,600.00
conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG
286 RBH18-PWD-1-3-21 conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW (Note : 290.00 Mtr 618.00 1,79,220.00
Derived from item (1-3-12)
Page 18 of 55
S/I/T/C
TOTAL AMOUNT
Providing & laying Hume pipe across road or below the plinth beams and buried cable protection
Supply and laying of Heavy duty RCC Hume pipe for road crossing, below plinth beam of following size as
diameter.
287 R2-ME-2-19-b 150mm Dia. 100.00 Mtr 611.00 61,100.00
288 R2-ME-2-19-d 300mm Dia. 100.00 Mtr 1,113.00 1,11,300.00
Supplying & laying I.S.I. mark 'B' class GI Pipe for surface/ under ground cable protection
289 R2-ME-2-21-c 25 mm dia. 10.00 Mtr 381.00 3,810.00
290 R2-ME-2-21-e 38/40 mm dia. 10.00 Mtr 553.00 5,530.00
291 R2-ME-2-21-f 50 mm dia. 50.00 Mtr 765.00 38,250.00
292 R2-ME-2-21-g 65 mm dia. 80.00 Mtr 969.00 77,520.00
293 R2-ME-2-21-h 80 mm dia. 80.00 Mtr 1,245.00 99,600.00
294 R2-ME-2-21-i 100 mm dia. 100.00 Mtr 1,775.00 1,77,500.00
Supply & Laying of double wall corrugated ( DWC) pipes of HDPE for underground cable protection
Supply & Laying of double wall corrugated ( DWC) pipes of HDPE for underground cable protection as per
IS 14930 Part II. With necessary connecting socket/couplings, tees of some material at required depth up to
R2-ME-2-22
900 mm below road ground surface. backfilling of with light ramming is included in the scope.
295 R2-ME-2-22-a 50 mm OD / 38 mm I.D. 440.00 Mtr 226.00 99,440.00

296 R2-ME-2-22-g 145 mm OD / 126 mm I.D. 75.00 Mtr 686.00 51,450.00
297 R2-ME-2-22-j 200 mm OD / 175 mm I.D. 75.00 Mtr 1,108.00 83,100.00
Sheet Moulding compound (SMC) Junction Box, for Outdoor Use
298 R2-ME-1-21-a SMCJB - 1414, Hinged cover, Size 170 x 170 x 105mm 100.00 Nos 1,253.00 1,25,300.00
Supplying and erecting Iron work consisting of Various sections of MS and including Plates, Chequered
Plates, Rods, Bars, MS pipes, etc. for panel board or any other purposes complete with bending, cutting,
299 RBH18-PWD-6-1-20 drilling and welding complete erected at the position with necessary materials duly painted with one coat of 750.00 KG 135.00 1,01,250.00
red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority
Lightning Protection System

Supply, Installation testing and commissioning of Vertical Aluminum Air terminal of Length 1000 mm along
300 BAH-ELEC-FA-48 3.00 Nos 10,580.00 31,740.00
with the round gun metal base plate and 3+2 mtr Gi pipe to make it of 5 mtr.
Supply, Installation testing and commissioning of Vertical aluminium Lighting Arrester of 16 mm dia, 1000
301 BAH-ELEC-FA-49 12.00 Nos 5,500.00 66,000.00
mm long with Gun Metal base plate
Supply, Installation testing and commissioning of 8 mm round aluminium conductor for horizontal lightning
302 BAH-ELEC-FA-50 500.00 Mtr 200.00 1,00,000.00
protection - run in roof.
Page 19 of 55
S/I/T/C
TOTAL AMOUNT
Supply, Installation testing and commissioning of roof conductor holder for 8 mm round aluminium
303 BAH-ELEC-FA-51 conductor made of Gun Metal for horizontal installation. The distance between each holder should be min of 500.00 Nos 150.00 75,000.00
1 mtr.
Supply, Installation testing and commissioning ofT connector for connecting of 8 mm Al round conductor .
304 BAH-ELEC-FA-52 80.00 Nos 425.00 34,000.00
The connector should be of Gun Metal with SS nuts and bolt.
Supply, Installation testing and commissioning of Cross connector for connecting of 8 mm Al round
305 BAH-ELEC-FA-53 25.00 Nos 435.00 10,875.00
conductor . The connector should be of Gun Metal with SS nuts and bolt.
Supply, Installation testing and commissioning of Expansion piece along with connector to compensate the
306 BAH-ELEC-FA-54 expansion of round 8 mm Al conductor when temperature variation . Connection should be in every 20 mtr. 25.00 Nos 490.00 12,250.00
Supply, Installation testing and commissioning of GLUE-is used to fix roof conductor holder on roof
307 BAH-ELEC-FA-55 80.00 Nos 350.00 28,000.00
Supply, Installation testing and commissioning of 8 mm round aluminium conductor as a down conductor
308 BAH-ELEC-FA-56 800.00 Mtr 135.00 1,08,000.00
mounted in the surface of wall which will carry the lightning current to earth pit.
Supply, Installation testing and commissioning of Down conductor holder for 8 mm round aluminium
309 BAH-ELEC-FA-57 conductor of min distance between the wall to the conductor will be of 85 mm. The distance between each 800.00 Nos 145.00 1,16,000.00
holder should be min of 1 mtr.
Supply, Installation testing and commissioning of straight connector for connecting of 8 mm Al round
310 BAH-ELEC-FA-58 10.00 Nos 390.00 3,900.00
conductor . The connector should be of Gun
311 BAH-ELEC-FA-59 Supply, Installation testing and commissioning of 6 digit lightning strike counter. 1.00 Nos 7,300.00 7,300.00
Supply, Installation testing and commissioning of Test Joint Point for 8 mm round aluminium conductor ,
312 BAH-ELEC-FA-60 30.00 Nos 3,450.00 1,03,500.00
the size should be of 25 x 3 x 150 mm copper in ABS boxes.
Supply, Installation testing and commissioning of UL LISTED low carbon high tensile steel rod with copper
coating of min 254 micron JK Chemrode -JK0110 CBR the dia should be 25.4 mm with length of 10 feet (
3000 mm) . The rod shall be as per IEC 62561-2 and approved by UL 467. The rod shall be tested fromCPRI
lab for current discharge 50kA peak. - JK0110CBR
313 BAH-ELEC-FA-61 20.00 Set 8,350.00 1,67,000.00
The Chemrode shall be surrounded with 25 kg (2 bag) of Earth enhance materiel JK Reslow according to
IEC 62561-7 and the Chemical resistance value shall not increase more then 0.067 Ωm along with earth pit
chamber made up polyplastic. Size of -254x330x260 MM earth pit chamber cover should be tested and
certified for 9tonne load bearing capacity from any central government lab (national test house Gaziabad
Supply, Installation testing and commissioning of GI STRIP ( 25X6 MM ) - For earthing interconnection
314 BAH-ELEC-FA-62 300.00 Mtr 180.00 54,000.00
Page 20 of 55
S/I/T/C
TOTAL AMOUNT
LIGHTNING PROTECTION FOR INCOMING POWERLINE.
Supply, Installation testing and commissioning of Power lightning protection device as per IEC 61643-1:
Type 1/class I type at the main distribution panel board after main switch cut off in parallel to the load to
protect the lightning impulse current upto 100 KA comer through the external overhead lines from
transformer out put to with the following technical parameters. 03 numbers of Type 1/Class I SPD of
315 BAH-ELEC-FA-63 encapsulated multiple spark gap technology to be connected between each line to neutral with the following 1.00 Set 19,000.00 19,000.00
parameter of 50KA ( 10/350 micro sec)/phase with follow current interrupting rating of 25 KA(Ifi),voltage
protection level <1.3 KV & 01 no. type 1 / class I SPD of encapsulated spark gap technology to be
connected between neutral and earth with the following parameter of Imax 100 KA ( 10/350 micro sec) with
follow current interrupting rating of 100 Arms(Ifi), voltage protection level <1.3 KV . The surge protection
device are recommended to be places incoming power line i.e as near to the main switch w/o enclosure ,
UPS internal wiring .
Supply, Installation, testing and commissioning of three phase input and three phase output online IGBT ups
316 RBH18-ELEC-FA-64 3.00 Nos 41,87,000.28 1,25,61,000.84
with 0.9 output p.f. with 30 minutes battery back up for UPS power. - 250 KVA
Supply, Installation, testing and commissioning of three phase input and three phase output online IGBT ups
317 RBH18-ELEC-FA-65 2.00 Nos 12,47,191.40 24,94,382.80
with 0.9 output p.f. with 30 minutes battery back up for UPS power. - 40 KVA
318 R2-ME-4-11-h Inverter of 20KVA ,single phase input and output with Tubular Battery(12X20) 200 AH Duration 4 Hrs. 1.00 Nos 6,92,287.00 6,92,287.00
Supply, installation, transportation, loading, unloading, shifting to final location 1010kva d.g. set with
acoustic canopy, inside canopy mounted diesel tanks, exhaust piping till outside canopy, fuel piping from
319 RBH18-ELEC-FA-66 3.00 Nos 1,10,02,009.56 3,30,06,028.68
fuel day tank to d.g. set, batteries, battery charger and battery carging and first fill of lube oil. necessary
alternator adaptor box for cable connection shall be provided.
Supply, installation, testing and commissioning of DG synchronising panel for 3 nos 1010 kva sets with 3
nos. of incoming feeder shall of 2000A TPN ACB, MDO, 50ka + 2 nos 2000A FPACB, 50ka as bucoupler. Panel
shall have - 3 no 2000 FP ACB, MDO, 50ka +1 nos 1600A ACB, MDO, 50ka as outgoing. All the ACBs shall be
with mircroprocessor releases. All meters etc shall be provided as per the specs of the tender panel SLD.
320 RBH18-ELEC-FA-67 Panel shall have ON-OFF signal from 4 nos. ATS and DG set panel shall have necessary PLC for the same. 1.00 Nos 63,69,584.36 63,69,584.36
control cabiling from DG to Dg sycn. panel - app 40mters single run and DG sycn. panel to ATS - app 120mtr
single run shall be DG supplires scope. Passing of Gensets from all concerned authorities shall be DG set
vendor scope along with meters and C.T. sealing for each set.
Page 21 of 55
S/I/T/C
TOTAL AMOUNT
SITC of DG set Exhaust piping with Necessary cladding / Clamping / Insultation etc. Complete. Exhaust pipes
shall be run horizontally till stack & then vertically up till 33 mtr from ground. stack design shall be as per
vendor subject to clients structural consultant approval. Foundation for stack shall be carried out by DG set
321 RBH18-ELEC-FA-68 Vendor as per Approval from Client / Clients strictural consultant. stack shall be from MS Angles / channels / 1.00 Set 66,90,113.24 66,90,113.24
flats etc. which shall be applied with Anti rust treatment - 2 coats + paint - minimum 2 coats. stack shall be
earthed. Stack-1 shall compprise of following Pipe from 1010KVA DG set-1 - Horizontal run : 35mtr + Vertical
Pipe from 1010KVA DG set-2 - Horizontal run : 20mtr + Vertical Pipe from 1010KVA DG set-3 - Horizontal
run : 20mtr + Vertical
Supply of 59.590 KWp Grid Connected Roof-top Solar Photovoltaic System based on heterojunction
322 KSS-EL-138 technology solar PV module as per the scope defined in the tender specifications.(185 Panel of 325W 1.00 Set 59,44,103.00 59,44,103.00
each).Complete as required .
Installation, Commissioning & Testing of 59.590 KWp Grid Connected Rooftop Solar Photovoltaic System
based on HIT solar PV module - including all expenses (to be borne by bidder) e.g. Air Fare, Local Transport,
accommodation etc. with Designing, Supplying, Fabricating and installation of MS fabricated structure /
support complete with welding, grouting and painting etc.complete with all necessary hardware and as per
the instruction of the Engineer in charge / Architect /Consultant. Complete as required .
Supplying , erecting, testing & commissioning SF 6 Insulated 22kV,630A, 16kA/3sec, 4 way outdoor,
extensible motorised SCADA compatible RMU as per electric supply company specification consisting of 2
323 BAH-ELEC-RA-71 1.00 Nos 10,58,893.00 10,58,893.00
nos. feeder with load break switch and 2 nos. feederwith VCB as per specification no. SW-HTS / RMU SCADA
(2LBS +2VCB)
Supplying, erecting, testing, commissioning 22 KV HT metering cubical (compact type) approved by
MSEDCL/licensee fabricated with 2mm.(14 SWG) M.S. sheets with supporting angle and channel, painted
with powder coating / epoxy paint of required shade copper bus bar size 25x6 mm electronic security lock
and heavy duty mechanical lock, with counter meter for measuring no of times the opening of doors, top
324 BAH-ELEC-RA-72 1.00 Nos 2,01,228.00 2,01,228.00
side cover ( CT,PT cover) interlock with meter doors, epoxy coated 3 nos CT having required ratio between
50/5 A to 100/5 A, VA10, class 0.2S, 22000/V3/110/V3 VA 50, class 0.2 epoxy terminal block suitable for
provided trivector meter, and provision for incoming and outgoing cables etc. complete duly tested by
licensee with necessary test certificates and erected on provided plinth/ cc foundation
TOTAL AMOUNT HT & LT ELECTRICAL WORKS (In Rs.) 29,40,17,366.14

Say 29,40,17,367.00
Page 22 of 55
On Plot bearing CTS No. 11A/4,Chandivali, Sangharsha Nagar, Kurla 400072
BILL OF QUANTITIES ELEVATOR WORKS - HOSPITAL BUILDING
S/I/T/C TOTAL
AMOUNT
1 FAIR ITEM SITC of Electric Traction Passenger Lift with 4.00 Per Unit 29,10,914.00 1,16,43,656.00
· Rated capacity :- 18 Passenger/1224Kg
· Floors :- G+7 floor (8 Stops/8 Landings)
· Travel :- 21 to 29.4 mtrs
· Location of Lift Machine:- MR
· Rated speed :- 1.5mps VS
· Car/Landing door clear opening of 1100 mm wide x 2000 mm high
· Clear Car size of ......mm wide x ......mm deep x 2250mm high
· Lift shaft available having clear size of ......mm wide x ......mm deep, ......mm Pit depth, ………mm Overhead.
· Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm
thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have
minimum 1hour fire rating (with submission of necessary valid test certificate issued
by NABL accredited or Independent Test laboratory).
· Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with
frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard
Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate
flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions
of engineer in charge.
· COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button
with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm,
VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift
car, LMR & FCC/ground floor.
· LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED
indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car
arrival & next travel direction audio-visual indication at all landings.
· Lift controller of simplex full collective based on microprocessor/ PLC with VVVF Drive having closed loop
control system, with IBMS compatible having necessary port. The controller shall have necessary protections
Page 23 of 55
S/I/T/C TOTAL
AMOUNT
control system, with IBMS compatible having necessary port. The controller shall have necessary protections
such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor
and travel direction protection, protection for phase loss at input or output etc.,various operation modes such
as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation,
call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door
open/close operation from COP etc. The system can record information for inimum 30 latest faults, with real-
time clock management and handheld keypad with LCD screen for view and setting of parameters, The
control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision
for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet
with powder coating with IP54
Protection class.
· ARD complete with necessary SMF VRLA batteries.
· Fireman controller having fireman switch at fire Landing.
· CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift
car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR
data backup for min. 90 days with min. 20" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In
Charge.
· Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of
necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction
pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR
floor/ shaft walls complete with main/diverter traction sheaves,
suspension wire ropes/belts of adequate size & strength.
· Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets
fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit
Page 24 of 55
S/I/T/C TOTAL
AMOUNT
1 FAIR ITEM SITC of having
For Lift Electric 1200mm
Traction Passenger Lift with
wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) 4.00 Per Unit 29,10,914.00 1,16,43,656.00
landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-
2 FAIR ITEM indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & 16.00 Floors 1,67,645.00 26,82,320.00
OSG rope, landing doors with all accessories etc. complete for the safe functioning of lift installation.
SITC of Electric Traction Passenger cum Stretcher/Hospital Lift with

· Location of Lift Machine:- MR/MRL
· Car/Landing door clear opening of 1100/1200 mm wide x 2000 mm high
by NABL accredited or Independent test laboratory).
3 FAIR ITEM 6.00 Per Unit 30,95,696.00 1,85,74,176.00
Page 25 of 55
S/I/T/C TOTAL
AMOUNT
1 FAIR ITEM SITC of having
For Lift Electric 1200mm
Traction Passenger Lift with
wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) 4.00 Per Unit 29,10,914.00 1,16,43,656.00
SITC of Electric Traction Passenger Lift with

· Car/Landing door clear opening of 1000mm wide x 2000 mm high
· Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with 2.00 Nos 27,83,302.00 55,66,604.00
of engineer in charge. · COP with SS face plate having metallic push buttons with Braille code & luminous
indicator around button with FPI, scrolling UP/DN LED indicator &
with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with
intercom system with telephone instrument in Lift car, LMR & FCC/ground floor.
control system, with IBMS compatible having necessary port. The controller shall have necessary Protections
Page 26 of 55
S/I/T/C TOTAL
AMOUNT
and travel direction protection, protection for phase loss at input or output etc. ,various operation modes
such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling
operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake
operation, door open/close operation from COP etc. The system can record information for minimum 30
latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of
parameters, The control panel duly wired with proper size & strength, copper wire for power & control circuit,
with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm
CRCA sheet with powder coating with IP54
Protection class.
· CCTV surveillance system comprises of 2 nos minimum 2.0MP FHD IP based vandal proof Dome camera in
lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with
HDR data backup for min. 90 days with min. 20" FHD TV monitor, to be kept in
FCC/LMR as directed by Engineer In Charge.
ladder etc. erected with necessary steel work.
· Minor civil work such as alteration work if any necessary for erection of landing door frames and it's
accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection
of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and
fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete
Page 27 of 55
S/I/T/C TOTAL
AMOUNT
1 FAIR ITEM fixing
SITC ofsteel girders/RCC
Electric Traction work having
Passenger Liftadequate
with strength for mounting and hoisting lift machine etc. complete 4.00 Per Unit 29,10,914.00 1,16,43,656.00
as per specification no. LFT.
· General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work
the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge.
· The above rate includes Fully Comprehensive AMC for one year from the date of commissioning.
For Lift having 1200mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded)
For additional 2MP Camera along with necessary accessories at Home Landing, add as given. 12.00 Floors 13,460.00 1,61,520.00
TOTAL AMOUNT ELEVATORS (In Rs) 4,53,34,076.00
Page 28 of 55
BILL OF QUANTITIES AUDIO SYSTEM WORKS - HOSPITAL BUILDING
S/I/T/C TOTAL
AMOUNT
Supply, Installation, Testing & Commissioning of Class D Dual zone amplifier with output power of upto
1 HBTMC/AUDIO/FA-6 2x120W or better @ 70/100V. frequency response of 55 Hz - 20 kHz (+0/–3 dB, @ 1 W reference 1 kHz); THD 5 Nos 2,11,925.00 10,59,625.00
<0.3% at rated power. Channel Separation ≤ –60 dBV (below rated power, 1 kHz), Dynamic range > 88 dB.
Supply, Installation, Testing & Commissioning of Amplifier: Class D Zone amplifier with power as 1 X 90 W @
2 HBTMC/AUDIO/FA-7 70/100V; frequency response of 60Hz to 20kHz; THD <1%; I unbalanced AUX input, 1 balanced page input, I 1 Nos 1,12,908.00 1,12,908.00
balanced mic/line input, 2 unbalanced line; Dynamic range is of 88 dB; built in loudspaker EQ.
Supply, Installation, Testing & Commissioning of Class D 1/2 RU 2 Channel ENERGY STAR amplifier / Stereo
3 HBTMC/AUDIO/FA-8 operation 60 watts into 8 Ω & 4 Ω, Bridged operation 200 watts into 8Ω & 4Ω, and 250 watts into 70v and 20 Nos 1,17,346.00 23,46,920.00
100v / 100-240 VAC Operation
Supply, Installation, Testing & Commissioning of Class D 1/2 RU 2 Channel ENERGY STAR amplifier / Stereo
4 HBTMC/AUDIO/FA-9 Operation 200 watts into 8 Ω & 4 Ω, Bridged operation 400 watts into 8Ω & 4Ω, and 350 watts into 70v and 5 Nos 1,17,344.00 5,86,720.00
100v / 100-240 VAC Operation
Supply, Installation, testing and commissioning of 2000W Amplifier using FAST channel combining
5 HBTMC/AUDIO/FA-10 technology. 4 channels, 500 watts/ch at 8Ω, 700 watts/ch at 4Ω,625 watts/ch at 2Ω, with XLR and NL4 1 Nos 2,49,241.00 2,49,241.00
connectors.
Supply, Testing , Installation and commissioning of 4 channel Power amplifiers for PA, Monitors and Other
speakers; Installation specific four channel amplifier Maximum output power 4 x 1600 W into 4 Ω 5 freely
6 HBTMC/AUDIO/FA-15 assignable GPIOs (General Purpose Input Output) + General fault Sampling rate96 kHz/27 Bit ADC/24 Bit DAC 5 Nos 15,68,454.00 78,42,270.00
Integrated DSP incorporates comprehensive loudspeaker management, switchable filtering functions as well
as user definable equalization and delay capabilities.
Supply, Installation, Testing & Commissioning of Ceiling mount speaker with frequency respose of 95Hz -
17kHz; nominal dispersion of 140 degree conical; Power handling 16W @ 8 Ohms, Transformer tapping
7 HBTMC/AUDIO/FA-1 50 Nos 26,399.00 13,19,950.00
(70/100V) : 1W, 2W, 4W, 8W, 16W), sensitivity 84 db SPL; and Max SPL of 96 db or better SPL with powder
coated steel grille.
Supply, Installation, Testing & Commissioning of Ceiling Speakers; Effective frequency range1 70 – 16 kHz or
better Rated noise power / voltage2 16 watts / 11.3 volts (rms) Broad-band sensitivity3 89 dB SPL Coverage
8 HBTMC/AUDIO/FA-2 angle (-6 dB) 140° (500 Hz - 5 kHz) Maximum continuous SPL4 101 dB or better ; Maximum peak SPL4 107 dB 300 Nos 20,116.00 60,34,800.00
Rated impedance 8 ohms Transformer taps 70 V: 16, 8, 4, 2, 1 watts and 8 ohm bypass 100V: 16, 8, 4, 2, watts
and 8 ohm bypass
Page 29 of 55
Supply, Installation, testing and commissioning of Stackable Wall Mount multi driver (8 or better) full range
Column Array loudspeaker with free field frequency range (-10dB) of 60Hz to 16kHz; RMS continuous power
9 HBTMC/AUDIO/FA-3 handling of 150W better; Nominal dispersion of 120 H X 20 V; full range Sensitivity of 87 Db SPL; Max SPL of 10 Nos 4,19,286.00 41,92,860.00
109 dB SPL (115dB peak); Nominal Impedance of 8 ohms; Rugged enclosure with powder coated steel grille.
Optional 70/100V OEM transformer module with tap settings of 100/50W shall be available.
Supply, Testing , Installation and commissioning of Compact LineArray Speaker with 2 x 6.5"/1.4" drivers
monitors with Frequency response (-5 dB standard) 55 Hz - 20 kHz and 15" driver with ferrite magnet coaxial
10 HBTMC/AUDIO/FA-5 10 Nos 7,85,476.00 78,54,760.00
1.4" exit compression driver passive crossover network Dispersion 75° (h x v)
SPLmax 131 dB 5 years warranty including all parts.
Supply, Testing , Installation and commissioning of Point Source Speaker with 2 x 8"/1.4" specific four channel
amplifier Maximum output power 4 x 1600 W into 4 Ω 5 freely assignable GPIOs (General Purpose Input
11 HBTMC/AUDIO/FA-12 Output) + General fault Sampling rate96 kHz/27 Bit ADC/24 Bit DAC Integrated DSP incorporates 1 Nos 9,66,548.00 9,66,548.00
comprehensive loudspeaker management, switchable filtering functions as well as user definable equalization
and delay capabilities.
Supply, Testing , Installation and commissioning of Stage monitor with 15" & 1.4" ;Installation and
commissioning of monitors with Frequency response (-5 dB standard) 55 Hz - 20 kHz and 15" driver with
ferrite magnet coaxial 1.4" exit compression driver passive crossover network Dispersion 75° (h x v) SPLmax
131 dB 5 years warranty including all parts.
S/I/T/C of Speakers :Power capacity:50w(HF),120W(MF),200(LF). Frequency Responce: 63hz -20khz ,
13 BTMC-AUDIO-3 Crossover: passive crossover, Impendance : 4 Ohm, cabinet Material: russian brich Plywood, horn 10 Nos 79,995.00 7,99,950.00
material:russian brich Plywood, Weight:19.0kg
14 HBTMC/AUDIO/FA-4 Supply, Installation, Testing & Commissioning of Portable System. 1 Nos 5,33,892.00 5,33,892.00
Supply, Testing , Installation and commissioning of Flyable Cardiod Subwoofer with 18" driver Directional
pattern: Cardioid Frequency response20 Hz - 20 kHz Effective frequency range, ±2 dB, Near field 2-3 cm (0.8 -
1.2 in)100 Hz - 20 kHz (4 - 6 dB soft boost at 15 kHz) Distortion, THD < 1% - CORE134 dB SPL RMS, 137 dB
SPL peakDynamic range - CORETyp. 111 dB With suitable adaptor for Wireless bodypack
Supply, Installation, Testing & Commissioning of Ceiling microphone array with patented automatic speaker
position detection and dynamic beamforming for best speech intelligibilityAnalog and digital (Dante™) audio
outputs for easy connectivity to video and audio conference systems Configuration and monitoring via
Sennheiser´s unique Control Cockpit software Open API for media and camera control applications 802.1X
network configuration via SSH Several installation options via suspension kit, flushmount or surface bracket
Certified for Microsoft Teams Rooms when deployed with Microsoft-certified DSPs
Page 30 of 55
SITC of wireless headworn microphone of Modulation wideband FM Frequency ranges 548-572 MHz, 766-
790 MHz Switching bandwidth up to 24 MHz Frequencies 8 frequency banks, each with up to 10 factory-
preset channels Signal-to-noise ratio ≥ 103 dBA THD≤ 0.9% Transmitter sychronization 2.4 GHz, Receiver
principle double superheterodyne Diversity principle antenna switching diversity via internal Antennas
17 HBTMC/AUDIO/FA-17 Sensitivity (at peak deviation) < 3 μV at 52 dB(A)rms S/N, AF frequency response 50 to 16,000 Hz (–3 dB) 25 Nos 60,708.00 15,17,700.00
Audio adjustment range45 dB, adjustable in 5-dB steps. Transmitter RF output power 10 mW AF frequency
response Line: 50-16,000 Hz Mic: 50-16,000 Hz Adjustment range of transmitter sensitivity 0 to -30 dB,
adjustable in 10 dB steps Transducer principle condenser, pre-polarized Sensitivity 20 mV/Pa Pick-up pattern
CARDIOID.OEM should have authorized service centre
Supply, Installation, Testing & Commissioning of wireless hand held microphone of Modulation wideband FM
Frequency ranges : 548-572 MHz, 766-790 MHz Switching bandwidth. up to 24 MHz Frequencies adjustable in
25-kHz steps 8 frequency banks, each with up to 12 factory-preset channels, Signal-to-noise ratio ≥ 103 dBA
THD ≤ 0.9% Transmitter sychronization 2.4 GHz, Receiver principle - double superheterodyne, Diversity
18 HBTMC/AUDIO/FA-18 principle True Diversity Sensitivity (at peak deviation) < 3 μV at 52 dB(A)rms S/N AF frequency response 50 2 Nos 79,391.00 1,58,782.00
to 16,000 Hz (–3 dB)Audio adjustment range 40 dB, adjustable in 5- dB steps Squelch adjustable from 3 dBμV
to 28 dBμV Line/Mic level .20 dB, switchable RF output power 10 mW, AF frequency response 80- 16,000 Hz
Microphone type dynamic, Pick-up pattern cardioid Input sensitivity (caspsule) 1.5 mV/Pa, SKM 865: 1.8
mV/Pa Adjustment
Supply, Installation, Testing & Commissioning of wireless handheld microphone of Modulation wideband FM
Frequency ranges 548-572 MHz, 766-790 MHz Switching bandwidth up to 24 MHz Frequencies 8 frequency
banks, each with up to 10 factory-preset channels Signal-to- noise ratio ≥ 103 dBA THD ≤ 0.9% Transmitter
sychronization 2.4 GHz, Receiver principle double superheterodyne Diversity principle antenna switching
19 HBTMC/AUDIO/FA-19 diversity via internal antennas Sensitivity (at peak deviation) < 3 μV at 52 dB(A)rms S/N AF frequency 60 Nos 45,477.00 27,28,620.00
response50 to 16,000 Hz (–3 dB) Audio adjustment range 45 dB, adjustable in 5-dB steps Microphone RF
output power 10 mW AF frequency response 80-16,000 Hz Microphone type dynamic Pick-up pattern
cardioid Input sensitivity (caspsule) 1.5 mV / Pa Adjustment range of transmitter sensitivity 0 to - 30 dB,
adjustable in 10 dB steps.OEM should have authorized service
Supply, Installation, Testing & Commissioning of wireless headworn microphone of Modulation wideband FM
Frequency ranges A: 548-572 MHz, GB: 606-630 MHzB: 614-638 MHz, C: 766-790 MHzD: 794-806 MHz,E: 821-
832 MHz, 863-865 MHzK: 925-937.5 MHz Switching bandwidth up to 24 MHzFrequencies 8 frequency banks,
each with up to 12 factory-preset channels Signal-to-noise ratio ≥ 103 dBA THD ≤ 0.9% Transmitter
20 HBTMC/AUDIO/FA-20 sychronization 2.4 GHz, Low Power OQPSK (only active during synchronization) Receiver principle double 1 Nos 88,491.00 88,491.00
superheterodyne Diversity principle True Diversity Sensitivity (at peak deviation) < 3 μV at 52 dB(A)rms S/N
AF frequency response 50 to 16,000 Hz (–3 dB) Max. AF output voltage (at peak deviation, 1 kHz AF) 1/4“ (6.3
mm) jack socket (unbalanced): +6 dBu, XLR socket (balanced): +12 dBu Audio adjustment range 40 dB,
adjustable in 5-dB steps Squelch adjustable
Page 31 of 55
SITC of pre-polarized condenser gooseneck microphone with an overall length of minimum 450 mm and with
XLR3M-type connector at its base, which shall offer radio frequency interference (RFI) shielding against
intermodulation from wireless equipment or devices, cardioid microphone capsule with uniform 120° angle of
acceptance (-3dB) or better, frequency response of 50 Hz to 20,000 Hz or better and sound input levels
21 HBTMC/AUDIO/FA-21 handling capability of minimum 130 dBspl, nominal equivalent noise level of 26 Dba or better and output 50 Nos 1,00,961.00 50,48,050.00
shall be low impedance balanced (<100 ohms) with current consumption shall be 3 mA or better. table stand
for connecting and operating XLR gooseneck microphones shall be rugged and unobtrusive with XLR-3F
microphone input and an XLR-3M microphone output operating on 48 V phantom power and current
consumption of 3.7 mA or better.
SITC of wireless hand held microphone with cardiod polarity pattern, true diversity receiver, Frequency range:
470 - 516 MHz , 516 - 558 MHz, 734 - 776 MHz, THD, total harmonic distortion ≤ 0.9 % ; Signal-to-noise ratio
≥ 110 dBA; Switching bandwidth up to 42 MHz; Nominal deviation ±24 kHz ;Modulation Wideband FM
;Current consumption 300 mA ;Adjacent channel rejection Typically ≥ 65 dB; Intermodulation attenuation
Typically ≥ 65 dB; Receiving frequency Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20
frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to
12 programmable channels; RF sensitivity< 2.5 μV for 52 dBA eff S/N; OEM should have authorized service
centre in India
Supply, Testing , Installation and commissioning of Directional Headset Microphone; Directional pattern:
Cardioid Frequency response20 Hz - 20 kHz Effective frequency range, ±2 dB, Near field 2-3 cm (0.8 - 1.2
in)100 Hz - 20 kHz (4 - 6 dB soft boost at 15 kHz) Distortion, THD < 1% - CORE134 dB SPL RMS, 137 dB SPL
peak Dynamic range - CORETyp. 111 dB With suitable adaptor for Wireless bodypack
Supply, Installation, Testing & Commissioning of dynamic super- cardioid vocal microphone with with
ON/OFF switch and with frequency response of 40 Hz – 16,000 Hz and sensitivity of 1.8 mV/Pa at 1 kHz,
24 HBTMC/AUDIO/FA-24 4 Nos 18,908.00 75,632.00
nominal impedance of 50 Ohm and min. terminating impedance of 1 k Ohm.OEM should have authorized
service centre in India
Supply, Installation, Testing & Commissioning of Premium 12-Input 2-Bus Mixer with XENYX Mic Preamps and
25 HBTMC/AUDIO/FA-25 30 Nos 32,532.00 9,75,960.00
British Eqs. 4 microphone & 4 Music/Multimedia Inputs
Supply, Installation, Testing & Commissioning of Premium 24-Input 4/2-Bus Mixer with XENYX Mic Preamps
26 HBTMC/AUDIO/FA-26 1 Nos 86,048.00 86,048.00
& Compressors, Klark Teknik Multi-FX Processor, Wireless Option and USB/Audio Interface
Supply, Testing , Installation and commissioning of Analog Mixer Type: Analog Channels: 24 Computer
Connectivity: 1 x USB (Device, iPod, iPhone) Faders: 28 Inputs - Mic Preamps: 16 x XLR Inputs - Line: 24 x TRS
(16 x Mono, 4 x Stereo) Inputs - Other: 4 x Stereo (RCA) Outputs - Main: 2 x XLR, 2 x TRS; 1 x XLR (Mono)
Outputs - Other:4 x TRS (Monitor, Matrix), 4 x TRS (Bus)
28 BTMC-AUDIO-13 S/I/T/C of DVD player 4 Nos 7,288.00 29,152.00
28 HBTMC/AUDIO/FA-28 Supply, Testing , Installation and commissioning of Flying Bar 2 Nos. 96,155.00 1,92,310.00
29 HBTMC/AUDIO/FA-29 Supply, Testing , Installation and commissioning of Mounting Bracket. 2 Nos. 71,179.00 1,42,358.00
30 HBTMC/AUDIO/FA-30 Supply, Testing , Installation and commissioning of Mounting Frame Top. 2 Nos. 1,31,120.00 2,62,240.00
31 HBTMC/AUDIO/FA-31 Supply, Installation, testing and commissioning of Mounting frame for Speakers 4 Nos. 62,868.00 2,51,472.00
32 HBTMC/AUDIO/FA-32 Supply, Installation, Testing & Commissioning of Audio De- embedder 1 Nos. 39,284.00 39,284.00
Page 32 of 55
Supply, Installation, Testing & Commissioning of 1.5mm, 2 core PVC Speaker Cable, high quality twisted pair
29 HBTMC/AUDIO/FA-33 manufactured with bright annealed electrolytic oxygen free grade tinned copper conductors, bunched 3500 Mtr 167.00 5,84,500.00
compactly
30 HBTMC/AUDIO/FA-34 Supply, Installation, Testing & Commissioning of 4sqmm 2 core PVC Speaker Cable 500 Mtr 316.00 1,58,000.00
Supply, Installation, Testing & Commissioning of 2.5mm, 2 core PVC Speaker Cable, high quality twisted pair
31 HBTMC/AUDIO/FA-35 manufactured with bright annealed electrolytic oxygen free grade tinned copper conductors, bunched 750 Mtr 218.00 1,63,500.00
compactly
32 HBTMC/AUDIO/FA-36 Supply, Installation, Testing & Commissioning of 2 core PVC audio Cable 1600 Mtr 159.00 2,54,400.00
TOTAL AMOUNT AUDIO SYSTEM WORKS (In Rs) 5,53,07,271.00
Page 33 of 55
BILL OF QUANTITIES VISUAL PROJECTION WORKS - HOSPITAL BUILDING
S/I/T/C TOTAL
AMOUNT
Supply, Installation, Testing & Commissioning of Video Extender ; Extends HDMI signals over a single Cat
5e/6/6a cable, HDMI (3D, Deep color, 4K); HDCP 2.2 compliant, Superior video quality – up to 4K@35m (Cat
1 HBTMC/VIS/FA-21 50 Nos 67,457.00 33,72,850.00
5e/6) / 40m, HDBaseT Anti-jamming – resists signal interference during high-quality video transmission
using HDBaseT technology, Plug-and-play, Rack-mountable.
Supply, Installation, Testing & Commissioning of Extends HDMI or VGA signals over a single Cat 5e/6/6a,
Superior video quality: • HDMI: 4K at distance up to 100 m via a Cat 6a, VGA: 1600 x 1200 and 1920 x 1200
up to 100 m via a Cat 6a, HDMI 1.4 (3D, Deep color, 4K); HDCP 2.2 compliant, Supports HDBaseT Long
Reach Mode – up to 150 m via a single Cat 5e/6 cable at resolutions up to 1080p, Designed to mount in a
two-gang junction box, compatible with US type, Built-in PoH (Power over HDBaseT) function – receives
2 HBTMC/VIS/FA-22 5 Nos 1,58,325.00 7,91,625.00
power supply from the HDBaseT output port on the connected device, Supports Auto Switch – allows
automatically switch to a newly plugged-in source, Functions as a switch or a converter, A Switch: Connects
two sources (HDMI or VGA), A Converter: Applies receivers with different interface (DVI, DisplayPort, or
HDMI), Supports RS-232 channel transmission or command mode for source switch control, Should include
with Compatible HDBaseT Receivers, Plug-and-play, LED indication of sources and device status.
Supply, Installation, testing and commissioning of HDBaseT Connectivity – extends an HDMI connection up
to 100m via a single Cat 5e/6/6a, Supports HDBaseT Long Reach Mode – up to 150 m via a single Cat 5e/6
cable at resolutions up to 1080p, HDMI (3D, Deep Color, 4K), HDCP 2.2 compatible, Supports resolutions of
3 HBTMC/VIS/FA-24 6 Nos 90,011.00 5,40,066.00
up to Ultra HD 4kx2k and 1080p Full HD, Consumer Electronic Control (CEC) allows interconnected HDMI
devices to communicate and respond to a single remote control, Supports wide screen format, Plug and
play – no software required Built- in 8KV/ 15 KV ESD protection. Rack Mountable.
HDMI HDBaseT-Lite Transmitter with EU Wall Plate (4K@40m) (HDBaseT Class B) Extends HDMI signals with
superior video quality over a single Cat 5e/6/6a or ATEN 2L-2910 Cat 6 cable 4K up to 40 m; 1080p up to 70
4 HBTMC/VIS/FA-44 3 Nos 1,06,917.00 3,20,751.00
m; HDMI 1.4 (3D, Deep color, 4K); HDCP 2.2 compliant; Designed to mount in a one-gang junction box;
Supports RS-232 channel transmission
Supply, Installation, Testing & Commissioning of HDMI HDBaseT- Lite (4K@40m) (HDBaseT Class B);
Extends HDMI signals over a single Cat 5e/6/6a cable, HDMI (3D, Deep color, 4K); HDCP 2.2 compliant,
5 HBTMC/VIS/FA-45 Superior video quality – up to 4K@35m (Cat 5e/6) / 40m, HDBaseT Anti-jamming – resists signal 3 Nos 67,457.00 2,02,371.00
interference during high-quality video transmission using HDBaseT technology, Plug- and-play, Rack-
mountable.
Page 34 of 55
Supply, Installation, Testing & Commissioning of Video Extender ; Extends HDMI signals over a single Cat
5e/6/6a cable, HDMI (3D, Deep color, 4K); HDCP 2.2 compliant, Superior video quality – up to 4K@35m (Cat
6 HBTMC/VIS/FA-21 50 Nos 67,457.00 33,72,850.00
5e/6) / 40m, HDBaseT Anti-jamming – resists signal interference during high-quality video transmission
using HDBaseT technology, Plug-and-play, Rack-mountable.
Supply, Installation, Testing & Commissioning of Video Switcher ; Allows up to four HDMI A/V sources to be
connected to two HDMI displays, HDCP 1.4 compatible, HDMI (3D, Audio Return Channel and Deep Color),
Supports Dolby True HD and DTS HD Master Audio, Audio Return Channel (ARC) function – connect an
HDMI cable to the ARC port to send audio from your source device to your audio/video receiver, OSD for
system configuration setting and information display, Instant switching between HDMI input sources via
7 HBTMC/VIS/FA-20 front panel pushbuttons or through the RS-232 serial control port, Feature EDID Expert technology to set up 22 Nos 2,02,371.00 44,52,162.00
different configurations via different EDID mode, Allows users to view the HDMI input source port /device
for easy selection, Supports superior video quality – HDTV resolutions of 480p, 720p, 1080i, 1080p
(1920x1080); up to WUXGA (1920 x 1200), Built-in bi-directional RS-232 serial control port for high-end
system control *, Extra audio from HDMI input signal that supports both optical and coaxial digiron, with
necessary false ceiling with adequate LED lights, blower/f
Supply, Installation, testing and commissioning of 8X8 4K HDMI Martrix Switch Connects any of 8 HDMI
sources to any of 8 HDMI displays, Supports 4K resolutions up to UHD (3840 x 2160) and DCI (4096 x 2160)
with refresh rates of 30 Hz (4:4:4) and 60 Hz (4:2:0), EDID Expert™ – selects optimum EDID settings for
smooth power-up, high-quality display and use of the best video resolution across different screens,
8 HBTMC/VIS/FA-19 Multiple Control Methods – system management via front-panel pushbuttons, IR remote, RS-232 control, 1 Nos 7,98,328.00 7,98,328.00
and Ethernet connections (Web GUI), Supports Dolby True HD and DTS HD Master audio, Signaling rates up
to 3.4 Gbits for flawless 4K output, HDMI (3D, Deep Color, 4K) and HDCP 2.2 compatible, Consumer
Electronics Control (CEC) allows interconnected HDMI devices to communicate and respond to a single
remote control, ESD protection for HDMI, Firmware upgradeable, Rack Mountable (1U design)
9 BTMC-VISUAL-6 S/I/T/C of HDMI Distribution Amplifiers 2 Nos 50,820.00 1,01,640.00
Supply, Installation, testing and commissioning of HDBaseT Connectivity – extends an HDMI connection up
to 100m via a single Cat 5e/6/6a, Supports HDBaseT Long Reach Mode – up to 150 m via a single Cat 5e/6
cable at resolutions up to 1080p, HDMI (3D, Deep Color, 4K), HDCP 2.2 compatible, Supports resolutions of
10 HBTMC/VIS/FA-24 8 Nos 90,011.00 7,20,088.00
up to Ultra HD 4kx2k and 1080p Full HD, Consumer Electronic Control (CEC) allows interconnected HDMI
devices to communicate and respond to a single remote control, Supports wide screen format, Plug and
play – no software required Built- in 8KV/ 15 KV ESD protection. Rack Mountable.
Supply, Installation, Testing & Commissioning of U/UTP LSZH 4 Pair network cable.Patch Cable (Stranded
11 HBTMC/VIS/FA-26 3310 Mtr 93.00 3,07,830.00
Conductor), 24 AWG x 4P
12 HBTMC/VIS/FA-37 Supply, Installation, Testing & Commissioning of VGA+Audio Cable 3 Mtr 6,794.00 20,382.00
13 HBTMC/VIS/FA-38 Supply, Installation, Testing & Commissioning of BC - 2T Control cable 90 Mtr 327.00 29,430.00
14 HBTMC/VIS/FA-27 Supply, Installation, Testing & Commissioning of AV Connectors TRS (Tip, Ring, Sleeve) 26 Nos 22,154.00 5,76,004.00
15 BTMC-VISUAL-11 S/I/T/C of Shielded RJ-45 Plug Kit for Extron XTP DTP 24 Shielded Twisted Pair Cable 6 Nos 3,630.00 21,780.00
16 BTMC-VISUAL-12 S/I/T/C of Fiber Optic Receiver for HDMI, Audio, and RS-232 HDMI over Fiber optic source from OT 4 Nos 1,81,500.00 7,26,000.00
Page 35 of 55
Supply, Installation, Testing & Commissioning of 9,000 lm(center), Business Projector Projection System
3LCD Technology LCD Panel 1.03 inch with C2 Fine Color Light Output 9,000 Lumen- 6,300 Lumen
(economy) In accordance with ISO 21118:2013 White Light Output 9,000 Lumen - 6,300 Lumen (economy) In
accordance with ISO 21118:2013 Portrait Colour Light Output 9,000 lm Portrait White Light Output 9,000 lm
Resolution WUXGA, 1920 x 1200, 16:10 High Definition 4K enhancement Aspect Ratio 16:10 Contrast Ratio
17 HBTMC/VISL/FA-4 1 Nos 26,81,898.00 26,81,898.00
2,500,000 : 1 Native Contrast 2,000 : 1 Light source Laser Laser Light source 20,000 hours Durability High,
30,000 hours Durability Eco Keystone Correction Manual vertical: ± 45 °, Manual horizontal ± 30 ° Colour
Reproduction Upto 1.07 billion colours Throw Ratio 1.57 - 2.56:1 Zoom Motorized, Factor: 1 - 1.6 Projection
Lens Zoom Ratio 1.57 - 2.56 : 1 Lens Optical Lens Shift Motorized - Vertical ± 60 %, horizontal ± 18 % Lens
position memory 10 positions Screen Size 60 inches - 500 inches
Supply, Installation, Testing & Commissioning of Projector ; 3,500 lumens and HD-ready WXGA resolution,
Projection System 3LCD Technology LCD Panel 0.59 inch with D9 Color Light Output 3,500 Lumen- 2,900
Lumen (economy) In accordance with ISO 21118:2013 White Light Output 3,500 Lumen - 2,900 Lumen
(economy) In accordance with ISO 21118:2013 Resolution WXGA, 1280 x 800, 16:10 High Definition HD
ready Aspect Ratio 16:10 Contrast Ratio 14,000 : 1 Light source Lamp Lamp 250 W, 5,000 h durability, 10,000
18 HBTMC/VIS/FA-1 4 Nos 3,10,917.00 12,43,668.00
h durability (economy mode), 9,000 h durability (economy mode) Keystone Correction Manual vertical: ± 3 °,
Manual horizontal ± 3 ° Colour Video Processing 10 Bits 2D Vertical Refresh Rate 100 Hz - 120 Hz Colour
Reproduction Upto 1.07 billion colours Throw Ratio 0.28 - 0.37:1 Zoom Digital, Factor: 1 - 1.35 Lens Optical
Screen Size 60 inches - 100 inches Projection Distance Wide 0.4 m ( 60 inch screen) Projection Distance Tele
0.6 m ( 100 inch screen) Projection Lens F Number 1.6 Projection Lens Focal
Supply, Installation, Testing & Commissioning of Projector; 3LCD Technology, RGB liquid crystal shutter LCD
Panel 0.61 inch with C2 Fine; Color Light Output 4,000 Lumen- 2,400 Lumen (economy) White Light Output
4,000 Lumen - 2,400 Lumen (economy) In accordance with ISO 21118:2013 Resolution Full HD 1080p, 1920 x
19 HBTMC/VIS/FA-2 1080, 16:9 High Definition Full HD Aspect Ratio 16:9 Contrast Ratio 16,000 : 1 Light source Lamp Lamp UHE, 12 Nos 2,44,701.00 29,36,412.00
230 W, 6,500 h durability, 17,000 h durability (economy mode) Keystone Correction Auto vertical: ± 30 °,
Reproduction Upto 1.07 billion colours
Supply, Installation, Testing & Commissioning of Projection system ; 6,000-lumen brightness, Full HD
WUXGA resolution, and a range of great features including HDBaseT and HDMI connectivity, screen-
mirroring and lens shift. Projection System 3LCD Technology, RGB liquid crystal shutter LCD Panel 0.67 inch
20 HBTMC/VIS/FA-3 with D10 Resolution WUXGA, 1920 x 1200, 16:10 High Definition Full HD Aspect Ratio 16:10 Contrast Ratio 6 Nos 6,17,817.00 37,06,902.00
2,500,000 : 1 Light source Laser Laser Light source 20,000 hours Durability High, 30,000 hours Durability Eco
Keystone Correction Manual vertical: ± 30 °, Manual horizontal ± 30° Colour Reproduction Upto 1.07 billion
colours
Supply, Installation, Testing & Commissioning of High Gain Fabric , Matte Finish 250-300" D Motorized
21 HBTMC/VIS/FA-11 3 Nos 4,43,093.00 13,29,279.00
Projector Screen
Supply, Installation, Testing & Commissioning of High Gain Fabric , Matte Finish 150" D Motorized Projector
22 HBTMC/VIS/FA-9 12 Nos 1,48,357.00 17,80,284.00
Screen
Page 36 of 55
23 HBTMC/VIS/FA-10 4 Nos 2,96,714.00 11,86,856.00
Screen
Supply, Installation, Testing & Commissioning of Document Camera;Supply, Installation, Testing &
Commissioning of Document Camera ; Pixels: 2MP (1920 x 1080 pixels) or better Camera Sensor: 1/2.7
24 HBTMC/VIS/FA-5 5 Nos 1,13,147.00 5,65,735.00
inch CMOS Sensor ; Resolution: Up to Full HD (1080p) Zoom: 10x Digital Zoom, 12x Optical Zoom Weight:
Approx 3.0kg
Supply, Installation, Testing & Commissioning of Document Camera; Pixels: 2MP (1920 x 1080 pixels)
25 HBTMC/VIS/FA-6 Camera Sensor: 1/2.7 inch CMOS Sensor Resolution: Up to Full HD (1080p) Zoom: 8x Digital Zoom Weight: 4 Nos 97,765.00 3,91,060.00
Approx 1.0kg
Supplying, erecting, testing, commissioning of Fiber Optic Transmitter for HDMI, Audio, and RS-232 Fiber
26 HBTMC/VIS/FA-46 1 Nos 3,85,661.00 3,85,661.00
optic HDMI Extender
27 HBTMC/VIS/FA-47 Supplying, erecting, testing, commissioning of Configurable Eight Output Fiber Optic Distribution Amplifier 1 Nos 11,59,203.00 11,59,203.00
Supply, Installation, Testing & Commissioning of U/UTP LSZH 4 Pair network cable.Patch Cable (Stranded
28 HBTMC/VIS/FA-26 2500 Mtr 93.00 2,32,500.00
Conductor), 24 AWG x 4P
29 HBTMC/VIS/FA-51 Supplying, erecting, testing, commissioning of Ultra Flexible High Speed HDMI Cables 100 Nos 14,196.00 14,19,600.00
Supplying, erecting, testing, commissioning of Fiber Optic Transmitter for HDMI, Audio, and RS-232 Fiber
30 HBTMC/VIS/FA-46 1 Nos 3,85,661.00 3,85,661.00
optic HDMI Extender
31 HBTMC/VIS/FA-47 Supplying, erecting, testing, commissioning of Configurable Eight Output Fiber Optic Distribution Amplifier 1 11,59,203.00 11,59,203.00
32 HBTMC/VIS/FA-47 Supplying, erecting, testing, commissioning of Configurable Eight Output Fiber Optic Distribution Amplifier 1 Nos 11,59,203.00 11,59,203.00
33 HBTMC/VIS/FA-32 Supply, Installation, Testing & Commissioning of Connectors XLR (External Line Return) with all accessories. 1 Nos 1,03,849.00 1,03,849.00
34 HBTMC/VIS/FA-33 Supply, Installation, Testing & Commissioning of AV RCA connectors. 1 Nos 1,08,795.00 1,08,795.00
Supply, Installation, Testing & Commissioning of Projector ; 3,500 lumens and HD-ready WXGA resolution,
Projection System 3LCD Technology LCD Panel 0.59 inch with D9 Color Light Output 3,500 Lumen- 2,900
Lumen (economy) In accordance with ISO 21118:2013 White Light Output 3,500 Lumen - 2,900 Lumen
(economy) In accordance with ISO 21118:2013 Resolution WXGA, 1280 x 800, 16:10 High Definition HD
ready Aspect Ratio 16:10 Contrast Ratio 14,000 : 1 Light source Lamp Lamp 250 W, 5,000 h durability, 10,000
35 HBTMC/VIS/FA-1 4 Nos 3,10,917.00 12,43,668.00
h durability (economy mode), 9,000 h durability (economy mode) Keystone Correction Manual vertical: ± 3 °,
Reproduction Upto 1.07 billion colours Throw Ratio 0.28 - 0.37:1 Zoom Digital, Factor: 1 - 1.35 Lens Optical
Screen Size 60 inches - 100 inches Projection Distance Wide 0.4 m ( 60 inch screen) Projection Distance Tele
0.6 m ( 100 inch screen) Projection Lens F Number 1.6 Projection Lens Focal
Page 37 of 55
Supply, Installation, Testing & Commissioning of Projector; 3LCD Technology, RGB liquid crystal shutter LCD
Panel 0.61 inch with C2 Fine; Color Light Output 4,000 Lumen- 2,400 Lumen (economy) White Light Output
4,000 Lumen - 2,400 Lumen (economy) In accordance with ISO 21118:2013 Resolution Full HD 1080p, 1920 x
36 HBTMC/VIS/FA-2 1080, 16:9 High Definition Full HD Aspect Ratio 16:9 Contrast Ratio 16,000 : 1 Light source Lamp Lamp UHE, 18 Nos 2,44,701.00 44,04,618.00
230 W, 6,500 h durability, 17,000 h durability (economy mode) Keystone Correction Auto vertical: ± 30 °,
Reproduction Upto 1.07 billion colours
Supply, Installation, Testing & Commissioning of Projection system ; 6,000-lumen brightness, Full HD
WUXGA resolution, and a range of great features including HDBaseT and HDMI connectivity, screen-
mirroring and lens shift. Projection System 3LCD Technology, RGB liquid crystal shutter LCD Panel 0.67 inch
37 HBTMC/VIS/FA-3 with D10 Resolution WUXGA, 1920 x 1200, 16:10 High Definition Full HD Aspect Ratio 16:10 Contrast Ratio 6 Nos 6,17,817.00 37,06,902.00
2,500,000 : 1 Light source Laser Laser Light source 20,000 hours Durability High, 30,000 hours Durability Eco
Keystone Correction Manual vertical: ± 30 °, Manual horizontal ± 30° Colour Reproduction Upto 1.07 billion
colours
38 HBTMC/VIS/FA-9 18 Nos 1,48,357.00 26,70,426.00
Screen
39 HBTMC/VIS/FA-10 4 Nos 2,96,714.00 11,86,856.00
Screen
Supply, Installation, Testing & Commissioning of Video Switcher ; Allows up to four HDMI A/V sources to be
connected to two HDMI displays, HDCP 1.4 compatible, HDMI (3D, Audio Return Channel and Deep Color),
Supports Dolby True HD and DTS HD Master Audio, Audio Return Channel (ARC) function – connect an
HDMI cable to the ARC port to send audio from your source device to your audio/video receiver, OSD for
system configuration setting and information display, Instant switching between HDMI input sources via
40 HBTMC/VIS/FA-20 front panel pushbuttons or through the RS-232 serial control port, Feature EDID Expert technology to set up 6 Nos 2,02,371.00 12,14,226.00
different configurations via different EDID mode, Allows users to view the HDMI input source port /device
for easy selection, Supports superior video quality – HDTV resolutions of 480p, 720p, 1080i, 1080p
(1920x1080); up to WUXGA (1920 x 1200), Built-in bi-directional RS-232 serial control port for high-end
system control *, Extra audio from HDMI input signal that supports both optical and coaxial digiron, with
necessary false ceiling with adequate LED lights, blower/f
TOTAL AMOUNT VISUAL PROJECTION WORKS (In Rs) 5,27,16,622.00
Page 38 of 55
BILL OF QUANTITIES STAGE LIGHTING WORKS - HOSPITAL BUILDING
S/I/T/C TOTAL
AMOUNT
1 HBTMC/SL/FA-05 Supply, Installation, Testing & Commissioning of Dimmer : Dimmer pack for Profile spot 1 Nos ₹ 41,402.00 ₹ 41,402.00
Supply, Installation, Testing & Commissioning of Light controller : 1024 dmx control, 2 opto isolated 1
2 HBTMC/SL/FA-02 Nos ₹ 1,69,918.00 ₹ 1,69,918.00
interface run 10 scenes, control 96 intelligent light small Avo light type controller
3 HBTMC/SL/FA-04 Supply, Installation, Testing & Commissioning of Profile 575 : 700 watts 26 degree 3 Nos ₹ 58,849.00 ₹ 1,76,547.00
4 HBTMC/SL/FA-01 Supply, Installation, Testing & Commissioning of Warm light : 3x54 watts LED white PAR 24 Nos ₹ 38,445.00 ₹ 9,22,680.00
5 HBTMC/SL/FA-04 Supply, Installation, Testing & Commissioning of Profile 575 : 700 watts 26 degree 3 Nos ₹ 58,849.00 ₹ 1,76,547.00
6 HBTMC/SL/FA-07 Supply, Installation, Testing & Commissioning of Cable: Cable 1.5 sqr mm for PAR light 500 Mtr ₹ 268.00 ₹ 1,34,000.00
7 BTMC-STGL-9 S/I/T/C of Panel box with 36 industrial socket 1 Nos ₹ 66,875.00 ₹ 66,875.00
Supply, Installation, Testing & Commissioning of 42U Equipment Rack for housing all rack
8 HBTMC/VIS/FA-34 mountable equipments with internal wiring, front glass door; heat dessipation fans; movement 1 Nos ₹ 76,948.00 ₹ 76,948.00
wheels, power distribution units etc.
9 HBTMC/SL/FA-08 Supply, Installation, Testing & Commissioning of C clamp to hang lights 30 Nos ₹ 1,176.00 ₹ 35,280.00
10 BTMC-STGL-12 S/I/T/C of patch cord with top 24 Nos ₹ 594.00 ₹ 14,256.00
11 BTMC-STGL-13 S/I/T/C of 2.5sqmm 4core FRLSH Flexible electrical cable ISI Mark 500 Mtr ₹ 409.00 ₹ 2,04,500.00
12 HBTMC/SL/FA-09 Supply, Installation, Testing & Commissioning of Connectors : Three pin connectors. 1 Nos ₹ 34,617.00 ₹ 34,617.00
TOTAL AMOUNT STAGE LIGHTING WORKS (In Rs) ₹ 20,53,570.00
Page 39 of 55
BILL OF QUANTITIES HT & LT ELECTRICAL WORKS - RESIDENTIAL BUILDING
S/I/T/C TOTAL
AMOUNT
Providing Round bottom FIRE Bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet
1 R2-ME-15-31-a with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ 20.00 Nos ₹ 814.00 ₹ 16,280.00
wall hook.
Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height
2 R2-ME-15-31-b frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly 5.00 Nos ₹ 4,748.00 ₹ 23,740.00
painted with one coat of red lead and two coats of silver Paint.
Supplying and erecting Wall hook 225mm projection for keeping fire buckets made out of 15 mm dia. M.S.
3 R2-ME-15-31-c 5.00 Nos ₹ 271.00 ₹ 1,355.00
Rod grouted in wall to a depth of minimum 15cms
Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn,
4 R2-ME-15-31-d crepe bandage, gauge bandage, medicated ready to use bandage (Bandaid) adhesive tape for medicinal 5.00 Nos ₹ 3,392.00 ₹ 16,960.00
use, scissors, anti-septic solution etc. (All above contents shall be of standard makes)
Supplying and fixing PVC Synthetic elastomer electrically m2 insulating mat with class A insulation
5 RBH18-PWD-10-2-30 25.00 Sqm ₹ 4,867.00 ₹ 1,21,675.00
conforming to IS: 15652 – 2006 & CPRI tested having 2 mm thickness upto 3.3 Kv
Supplying and fixing PVC Synthetic elastomer electrically m2 insulating mat with class B insulation
6 RBH18-PWD-10-2-31 50.00 Sqm ₹ 5,236.00 ₹ 2,61,800.00
conforming to IS: 15652 – 2006 & CPRI tested having 2.5 mm thickness upto 11 kV
Supplying and erecting D.C.P. type Fire Extinguisher 6 kg capacity cartridge type with Gun Metal cap 150
7 R2-ME-15-30-e gram CO2 gas cartridge, powder and brackets conforming to IS 2171- 1985/ IS 15683 and complete erected 20.00 Nos ₹ 2,645.00 ₹ 52,900.00
with necessary clamps made from 50x6 mm M.S. flat with nuts & bolts grouted in wall complete.
Fluorescent emergency light fitting with 1 No. 1 feet (30cms.) single tube 9 / 11 W with M.F. SLA rechargable
8 R2-ME-5-15-a 40.00 Nos ₹ 1,332.00 ₹ 53,280.00
battery with 3 hrs of back up.
9 R2-ME-15-29-a SITC of Auto glow signage for Emergency Fire Exit 60.00 Nos ₹ 814.00 ₹ 48,840.00
10 R2-ME-15-29-b SITC of Auto glow signage for Staircase direction 60.00 Nos ₹ 814.00 ₹ 48,840.00
11 R2-ME-15-29-c SITC of Auto glow signage for Do not use lift in case of Fire etc. 60.00 Nos ₹ 1,085.00 ₹ 65,100.00
12 BAH-ELEC-FA-21 SITC of LIGHTING & POWER PANEL As per SLD 1.00 Nos ₹ 3,50,000.00 ₹ 3,50,000.00
NON DG PANEL 3rd QUADRANT Panel comprising of 400 amps, 35KA, TPN, MCCB with voltmeter &
02 nos. of 250A, TP MCCB, 11 nos of 80A, TPN MCB, 03 no. of 63A, TPN MCCB, as outgoing.
13 BAH-ELEC-FA-26 SITC of LIFT PANEL As per SLD 1.00 Nos ₹ 2,10,000.00 ₹ 2,10,000.00
LIFT Panel comprising of 320 amps, 35KA, TPN, MCCB with voltmeter & ammeter as incomer with 320 amps
4 pole (35 KA for 1 sec.) , 415V, 50Hz, AC, AL bus bars. Panel shall have 04 nos of 100A TPN MCB, 01 no. of
63A, TPN MCB, 01 no. of 40A, TPN MCB, 05 no. of 32A, TPN MCB, 03 no. of 20A, TPN MCB as outgoing.
14 BAH-ELEC-FA-28 SITC of MAIN STAFF QUARTER BUILDING As per SLD 1.00 Nos ₹ 7,50,000.00 ₹ 7,50,000.00
Page 40 of 55
S/I/T/C TOTAL
AMOUNT
MAIN STAFF QUARTER BUILDING Panel comprising of 400 amps, 35KA, TPN, MCCB with voltmeter &
41 nos. of 40A, DP MCB, With KWH meter Inculding Indication Lamps as outgoing.
Supplying,erecting & making 500A FP MCCB,35KA+TVSS BOX with 1.6 mm thick CRCA sheet steel
15 RBH18-ELEC-FA-28 1.00 Nos ₹ 1,32,559.00 ₹ 1,32,559.00
Supplying,erecting & making 250A FP MCCB,35KA+TVSS BOX with 1.6 mm thick CRCA sheet steel
16 RBH18-ELEC-FA-29 1.00 Nos ₹ 1,06,403.32 ₹ 1,06,403.32
17 RBH18-ELEC-FA-31 1.00 Nos ₹ 71,518.64 ₹ 71,518.64
Supplying,erecting & making 150/160A FP ATS,25KA (Asco - 230series) with 1.6 mm thick CRCA sheet steel
18 RBH18-ELEC-FA-37 1.00 Nos ₹ 83,250.88 ₹ 83,250.88
19 RBH18-ELEC-FA-38 1.00 Nos ₹ 91,179.48 ₹ 91,179.48
20 RBH18-ELEC-FA-39 1.00 Nos ₹ 95,143.20 ₹ 95,143.20
Supply, Installation, testing and connection of 3P4W+50%E internally earthed Al. Bus duct as per rating
given below with all necessary fabrication of supports and other accessories works complete as per
specification. All joints / tees / bends / phase change over boxes/ Flange End/Horizontal Bend/Vertical
Bend/Plug-in Point/ Vertical Spring Hanger/Fix hanger/ End Cover/ Horizontal Fixing Clips/Tinned Copper
Braided Flexibles -360mm (with Hardware - Nuts and Bolts) etc are deemed to be included in the Rmt
supply. - Sandwich type - IP 55 unless otherwise specified in item. Minimum fault level of Bus duct shall be
as per panel but bot less then 35 kA. Arrangement for tapping earth as per requirement & approved shop
drawings.All necessary supports & work for installation of busduct shall be included in quoted cost.All joint
in horizontal ran shall have ip65 protection.Type test Certificates are from ERDA (ASTA Accredited) lab as
per IEC 61439 Part 1 and 6 Temperature rise design as per Latest IEC 61439 Part 1 and 6
21 BAH-ELEC-FA-30 180.00 Mtr ₹ 38,742.00 ₹ 69,73,560.00
1.6mm thickness Impulse Withstand Voltage : 8kV Paint Shade : RAL7032 Epoxy Powder Coating Straight
Run Feeder IP55
22 BAH-ELEC-FA-32 with MCB. End feed Panel with switchgear ( Suitable for MCCB ) - Al Busbar Arrangement , Complete with Nos ₹ 1,45,000.00 ₹ 0.00
SITC of tap off boxes with MCCBs. All MCCBs shall be with thermal magnetic adjustable releases for O/L and
S/C. The MCCBs shall have Ics = 100% Icu. All tap of boxes shall support the cable sizes given in SLD along
with tender.
23 BAH-ELEC-FA-36 125 A,FP,25KA. 1.00 Nos ₹ 14,800.00 ₹ 14,800.00
24 BAH-ELEC-FA-37 100 A,FP,25KA. 1.00 Nos ₹ 10,500.00 ₹ 10,500.00
Page 41 of 55
S/I/T/C TOTAL
AMOUNT
25 BAH-ELEC-FA-40 40 A,FP,25KA. 250.00 Nos ₹ 10,500.00 ₹ 26,25,000.00
Excavating the trenches and refilling,reinstatement of the same after the cable is laid in approved manner
26 R2-ME-2-8 50.00 Cu. Mtr. ₹ 307.00 ₹ 15,350.00
(750 mm deep, 600 mm wide),in all types of soils 1 Cu. Mtr. = 2.2 RMT.
G.I. Cable tray with all other accessories : Perforated Type

Readymade 2500mm standard length, prefabricated, perforated cable tray from MS sheet and then hot dip
galvanised, of following sizes and associated accessories such as coupler plates, tees, elbow etc.
Galvanisation thickness shall be minimum 86 Micron.
27 R2-ME-2-13-a 75 x 25mm (W x H) - (16 SWG - 1.6mm) without cover 100.00 Mtr ₹ 1,074.00 ₹ 1,07,400.00
28 R2-ME-2-13-b 100 x 25mm (W x H) - (16 SWG - 1.6mm) without cover 200.00 Mtr ₹ 1,197.00 ₹ 2,39,400.00
29 R2-ME-2-13-c 150 x 25mm (W x H) - (16 SWG - 1.6mm) without cover 220.00 Mtr ₹ 1,237.00 ₹ 2,72,140.00
30 R2-ME-2-13-d 200 x 50mm (W x H) - (16 SWG - 1.6mm) without cover 100.00 Mtr ₹ 1,522.00 ₹ 1,52,200.00
31 R2-ME-2-13-e 300 x 50mm (W x H) - (16 SWG - 1.6mm) without cover 250.00 Mtr ₹ 2,067.00 ₹ 5,16,750.00
32 R2-ME-2-13-k 450 x 75mm (W x H) - (14SWG - 2mm) without cover 50.00 Mtr ₹ 3,533.00 ₹ 1,76,650.00
G.I. Cable tray with all other accessories : Ladder Type
G.I. Trunking / Duct / Raceway & all other accessories

Readymade 2500mm standard length, prefabricated, GI trunking from MS sheet and then hot dip
galvanised, of following sizes and associated accessories such as coupler plates, tees, elbow etc. 50 mm side
flanges shall be provided. Galvanisation thickness shall be minimum 86 Micron. cost of trunking shall be
included junction box of suitable size, and all other accessories required to complete the work.
33 R2-ME-2-15-c 100 x 40mm (W x H) - (14 SWG - 2mm) with cover without partition 100.00 Mtr ₹ 690.00 ₹ 69,000.00
34 R2-ME-2-15-d 150 x 40mm (W x H) - (14 SWG - 2mm) with cover without partition 230.00 Mtr ₹ 906.00 ₹ 2,08,380.00
35 R2-ME-2-15-e 300 x 40mm (W x H) - (14 SWG - 2mm) with cover without partition 60.00 Mtr ₹ 1,498.00 ₹ 89,880.00
PVC Trunking with cover & all other accessories
Following sizes PVC trunking with cover and all other accessories to complete the work like bend, partion,
internal and external angles etc. cost of trunking shall be included base, cover, finishing accessories, junction
boxes and mounting wiring accessories.
36 R2-ME-2-16-a 50 x 50mm (W x H) - PVC Trunking with cover 30.00 Mtr ₹ 280.00 ₹ 8,400.00
37 R2-ME-2-16-b 80 x 50 mm (W x H) - PVC Trunking with cover 30.00 Mtr ₹ 676.00 ₹ 20,280.00
38 R2-ME-2-16-c 100 x 50mm (W x H) - PVC Trunking with cover 50.00 Mtr ₹ 1,090.00 ₹ 54,500.00
39 R2-ME-2-16-d 150 x 50mm (W x H) - PVC Trunking with cover 50.00 Mtr ₹ 2,129.00 ₹ 1,06,450.00
SWITCHGEARS, MCB DB, PANELS

Distribution Board (Box only)
Page 42 of 55
S/I/T/C TOTAL
AMOUNT
IP43 SPN & TPN Distribution board with metal door of various sizes on wall/ Column/ floor mounting, with
detachable gland plate, terminal connectors and other required hardware & fasteners. DB shall be designed
R2-ME-1-15
for incoming MCB & no. of outgoing MCB as per requirement or no. of outgoing way (Cost of the DBs will
be without MCB, MCCB & other acessories)
40 R2-ME-1-15-a IP43 8 Way SPN DB (4 + 4Way) 15.00 Nos ₹ 2,458.00 ₹ 36,870.00
41 R2-ME-1-15-b IP43 12 Way SPN DB (4 + 8Way) 20.00 Nos ₹ 2,955.00 ₹ 59,100.00
42 R2-ME-1-15-c IP43 16 Way SPN DB (4 + 12Way) 250.00 Nos ₹ 3,708.00 ₹ 9,27,000.00
43 R2-ME-1-15-d IP43 4 Way TPN DB (8 + 12Way) 2.00 Nos ₹ 4,846.00 ₹ 9,692.00
44 R2-ME-1-15-f IP43 8 Way SPN DB (8 + 24Way) 5.00 Nos ₹ 7,164.00 ₹ 35,820.00
45 R2-ME-1-15-g IP43 12 Way SPN DB (8 + 36Way) 10.00 Nos ₹ 10,733.00 ₹ 1,07,330.00
MCCB incomer and MCB outgoing Distribution Board
IP 43 & IP 30 Vertical TPN Distribution Board with Modular Incomer with Metal door (Box only) of of various
sizes on wall/ Column/ floor mounting, with detachable gland plate, terminal connectors and other required
R2-ME-1-16 hardware & fasteners. DB shall be designed with provision for MCCB as incomer & SP / TP MCB as outgoing
as per requirement. (Cost of the DBs will be without MCB, MCCB). DB shall be as per IS 8623- 1 & 3 / IEC
61439- 1 & 3.
46 R2-ME-1-16-a IP 43 4 Way MCCB DB (125/160A MCCB + 4Way TP MCB /12 Way SP MCB) 2.00 Nos ₹ 14,396.00 ₹ 28,792.00
47 R2-ME-1-16-c IP 43 8 Way MCCB DB (125/160A MCCB + 8Way TP MCB /24 Way SP MCB) 2.00 Nos ₹ 17,998.00 ₹ 35,996.00
48 R2-ME-1-15-l Supply, installation, testing & commissioning of distribution boards, 12 way VTPN type DB with door 1.00 Nos ₹ 20,443.00 ₹ 20,443.00
49 R2-ME-1-15-m Supply, installation, testing & commissioning of distribution boards, 8 way VTPN type DB with door 2.00 Nos ₹ 15,195.00 ₹ 30,390.00
50 R2-ME-1-15-n Supply, installation, testing & commissioning of distribution boards, 4 way VTPN type DB with door 2.00 Nos ₹ 11,946.00 ₹ 23,892.00
51 R2-ME-1-15-ag IP 43 TPN Distribution Board with metal door (Box only) 4 Way ( 4 + 12 way) 2.00 Nos ₹ 5,279.00 ₹ 10,558.00
52 R2-ME-1-15-ai IP 43 TPN Distribution Board with metal door (Box only) 6 Way ( 8 + 18 way) 2.00 Nos ₹ 6,866.00 ₹ 13,732.00
53 R2-ME-1-15-aj IP 43 TPN Distribution Board with metal door (Box only) 8 Way ( 8 + 24 way) 4.00 Nos ₹ 8,176.00 ₹ 32,704.00
54 R2-ME-1-15-ak IP 43 TPN Distribution Board with metal door (Box only) 12 Way ( 8 + 36 way) 10.00 Nos ₹ 12,209.00 ₹ 1,22,090.00
MCB
Unit rate of 240V/415V, 'C' Curve, 10kA, Miniature circuit breaker suitable for DB mounting complete with
R2-ME-1-17
connection, testing & commissioning etc. as required.
55 R2-ME-1-17-b 10A SP MCB 2,000.00 Nos ₹ 335.00 ₹ 6,70,000.00
56 R2-ME-1-17-c 16A/20A SP MCB 200.00 Nos ₹ 335.00 ₹ 67,000.00
57 R2-ME-1-17-i 32A DP MCB 20.00 Nos ₹ 995.00 ₹ 19,900.00
58 R2-ME-1-17-j 63A DP MCB 1.00 Nos ₹ 1,600.00 ₹ 1,600.00
59 R2-ME-1-17-v 32A 4P MCB 250.00 Nos ₹ 2,193.00 ₹ 5,48,250.00
60 R2-ME-1-17-w 63A 4P MCB 20.00 Nos ₹ 3,161.00 ₹ 63,220.00
61 R2-ME-1-17-ap MCB 'C' Curve, 15kA - 80A FP MCB 1.00 Nos ₹ 14,635.00 ₹ 14,635.00
MCCB
Page 43 of 55
S/I/T/C TOTAL
AMOUNT
Unit rate of 415V, 10kA/16kA, Moulded case circuit breaker with Thermal magnetic overload suitable for DB
R2-ME-1-18
mounting complete with connection, testing & commissioning etc. as required.
62 R2-ME-1-18-c 100A 4P MCCB 1.00 Nos ₹ 5,299.00 ₹ 5,299.00
63 R2-ME-1-18-d 125A 4P MCCB 2.00 Nos ₹ 8,887.00 ₹ 17,774.00
64 R2-ME-1-18-f 160A 4P MCCB 1.00 Nos ₹ 10,961.00 ₹ 10,961.00
65 R2-ME-1-18-i 250A TPN MCCB 1.00 Nos ₹ 18,233.00 ₹ 18,233.00
MCBs in 16SWG sheet steel metal box
MCBs In 16 SWG CRCA sheet steel enclosure, powder coated, wall / column mounted with provision for
support arrangement, 2 earthing terminal, Incoming & outgoing cable terminal etc. with required hardware
R2-ME-1-19
& fasteners. All MCBs shall be rated for 10kA, 'C' curve type. Colour shade shall be RAL 7032 Smoke gray as
per IS 5. IP 43 Enclosure.
66 R2-ME-1-19-a 16/32 Amp. DP MCB 5.00 Nos ₹ 2,974.00 ₹ 14,870.00
67 R2-ME-1-19-b 16/32 Amp. TPN MCB 5.00 Nos ₹ 4,174.00 ₹ 20,870.00
68 R2-ME-1-19-c 63 Amp. TPN MCB 5.00 Nos ₹ 5,143.00 ₹ 25,715.00
Earth Leakage circuit Breaker / Residual Current circuit Breaker
ELCBs In 16 SWG CRCA sheet steel enclosure, powder coated, wall / column mounted with provision for
R2-ME-1-25 support arrangement, 2 earthing terminal, Incoming & outgoing cable terminal etc. Colour shade shall be
RAL 7032 Smoke gray as per IS 5.
69 R2-ME-1-25-m 25Amp. 2Pole 2.00 Nos ₹ 4,509.00 ₹ 9,018.00
70 R2-ME-1-25-n 40Amp. 2Pole 250.00 Nos ₹ 5,079.00 ₹ 12,69,750.00
71 R2-ME-1-25-n1 63Amp. 2Pole 5.00 Nos ₹ 6,064.00 ₹ 30,320.00
72 R2-ME-1-25-p 40Amp. 4Pole 4.00 Nos ₹ 5,917.00 ₹ 23,668.00
73 R2-ME-1-25-q 63Amp. 4Pole 2.00 Nos ₹ 6,707.00 ₹ 13,414.00
74 R2-ME-1-25-c 40Amp. 2Pole ELCB 3.00 Nos ₹ 5,079.00 ₹ 15,237.00
75 R2-ME-1-25-f 40Amp. 4Pole ELCB 2.00 Nos ₹ 5,917.00 ₹ 11,834.00
76 R2-ME-1-25-g 63Amp. 4Pole ELCB 2.00 Nos ₹ 6,707.00 ₹ 13,414.00
77 R2-ME-1-25-h 25Amp. 2Pole 5.00 Nos ₹ 4,355.00 ₹ 21,775.00
78 R2-ME-1-25-i 40Amp. 2Pole 5.00 Nos ₹ 4,843.00 ₹ 24,215.00
79 R2-ME-1-25-j 25Amp. 4Pole 8.00 Nos ₹ 5,524.00 ₹ 44,192.00
80 R2-ME-1-25-k 40Amp. 4Pole 8.00 Nos ₹ 5,698.00 ₹ 45,584.00
Providing, erecting & commissioning RCCB only of electro magnetic type with 30mA sensitivity and having
81 RBH18-PWD-5-6-3 2.00 Nos ₹ 3,252.00 ₹ 6,504.00
capacity of 63 A. 2 pole complete as per specification No. SW- RCCB/RCCB
82 RBH18-PWD-5-6-15 10.00 Nos ₹ 226.00 ₹ 2,260.00
83 RBH18-PWD-5-6-16 10.00 Nos ₹ 292.00 ₹ 2,920.00
Page 44 of 55
S/I/T/C TOTAL
AMOUNT
Supply, Laying of cables on cable trays, structural supports and cable supports provided, include unloading,
shifting upto site. The scope includes clamping of cables by ready made G.I. spacers, saddles or clamps
fabricated out of M.S. strip 3 mm thick, Treasing and Clamping of Cable on cable tray, supply of all clamping
materials and hardware etc., providing cable tags made out of aluminium strip and 75x20 mm in size with
cable number and size punched on it. Cable tags shall be tied to cables at every 10 meter interval and at
both the ends. All cables shall be of CU. FRLSZH category.
84 R2-ME-2-3a-d 6C x 1.5 Sq.mm Cu. FRLSZH Cable 100.00 Mtr ₹ 169.00 ₹ 16,900.00
85 R2-ME-2-3a-h 6C x 2.5 Sq.mm Cu. FRLSZH Cable 100.00 Mtr ₹ 247.00 ₹ 24,700.00
86 R2-ME-2-3a-f 3C x 2.5 Sq.mm Cu. FRLSZH Cable 1,000.00 Mtr ₹ 142.00 ₹ 1,42,000.00
87 R2-ME-2-3a-j 3C x 4 Sq.mm Cu. FRLSZH Cable 100.00 Mtr ₹ 203.00 ₹ 20,300.00
88 R2-ME-2-3a-n 3C x 6 Sq.mm Cu. FRLSZH Cable 2,500.00 Mtr ₹ 263.00 ₹ 6,57,500.00
89 R2-ME-2-3a-r 3C x 10 Sq.mm Cu. FRLSZH Cable 50.00 Mtr ₹ 410.00 ₹ 20,500.00
90 RBH18-ELEC-FA-56 3C x 16 Sq.mm Cu. FRLSZH Cable 250.00 Mtr ₹ 684.40 ₹ 1,71,100.00
91 R2-ME-2-3a-g 4C x 2.5 Sq.mm Cu.FRLSZH Cable 600.00 Mtr ₹ 178.00 ₹ 1,06,800.00
92 R2-ME-2-3a-k 4C x 4.0 Sq.mm Cu. FRLSZH Cable 700.00 Mtr ₹ 273.00 ₹ 1,91,100.00
93 R2-ME-2-3a-o 4C x 6.0 Sq.mm Cu. FRLSZH Cable 300.00 Mtr ₹ 337.00 ₹ 1,01,100.00
94 R2-ME-2-3a-s 4C x 10 Sq.mm Cu. FRLSZH Cable 250.00 Mtr ₹ 597.00 ₹ 1,49,250.00
95 R2-ME-2-3a-u 4C x 16 Sq.mm Cu. FRLSZH Cable 250.00 Mtr ₹ 863.00 ₹ 2,15,750.00
96 R2-ME-2-3a-v 4C x 25 Sq.mm Cu. FRLSZH Cable 20.00 Mtr ₹ 1,450.00 ₹ 29,000.00
97 R2-ME-2-3a-w 3.5C x 35 Sq.mm Cu. FRLSZH Cable 200.00 Mtr ₹ 1,740.00 ₹ 3,48,000.00
98 R2-ME-2-3a-x 3.5C x 50 Sq.mm Cu. FRLSZH Cable 250.00 Mtr ₹ 2,416.00 ₹ 6,04,000.00
99 R2-ME-2-3a-y 3.5C x 70 Sq.mm Cu. FRLSZH Cable 120.00 Mtr ₹ 3,419.00 ₹ 4,10,280.00
100 R2-ME-2-3a-ac 3.5C x 185 Sq.mm Cu. FRLSZH Cable 200.00 Mtr ₹ 9,510.00 ₹ 19,02,000.00
101 R2-ME-2-3a-ad 3.5C x 240 Sq.mm Cu. FRLSZH Cable 50.00 Mtr ₹ 12,215.00 ₹ 6,10,750.00
102 R2-ME-2-3a-ae 3.5C x300 Sq.mm Cu. FRLSZH Cable 200.00 Mtr ₹ 15,216.00 ₹ 30,43,200.00
Cable end terminations for LV, XLPE/PVC insulated, PVC sheathed, armoured/ unarmoured cables including
supply and fixing of Double compression cable glands, stripping of cable insulation, supply and fixing of
tinned plated copper lugs for copper cables for all phases and crimping the same to the conductor for the
following cables. Miscellaneous items like cable lugs, G.I nut - bolts and G.I washers , consumables and other
hardware materials as required to make the installation complete, are in the scope. All G.I Nut, bolt and
washers shall be HDGI with 80 micron. One set of termination includes gland, lugs for cable core &
accessories
103 R2-ME-2-12-g 3C x 2.5 Sq.mm 10.00 Nos ₹ 113.00 ₹ 1,130.00
104 R2-ME-2-12-h 3C x 4 Sq.mm 20.00 Nos ₹ 172.00 ₹ 3,440.00
105 R2-ME-2-12-i 3C x 6 Sq.mm 500.00 Nos ₹ 176.00 ₹ 88,000.00
106 R2-ME-2-12-k 3C x 10 Sq.mm 1.00 Nos ₹ 187.00 ₹ 187.00
107 R2-ME-2-12-l 3C x 16 Sq.mm 10.00 Nos ₹ 332.00 ₹ 3,320.00
108 R2-ME-2-12-p 4C x 2.5 Sq.mm 50.00 Nos ₹ 173.00 ₹ 8,650.00
109 R2-ME-2-12-q 4C x 4 Sq.mm 225.00 Nos ₹ 179.00 ₹ 40,275.00
Page 45 of 55
S/I/T/C TOTAL
AMOUNT
110 R2-ME-2-12-r 4C x 6 Sq.mm 70.00 Nos ₹ 186.00 ₹ 13,020.00
111 R2-ME-2-12-s 4C x 10 Sq.mm 20.00 Nos ₹ 199.00 ₹ 3,980.00
112 R2-ME-2-12-t 4C x 16 Sq.mm 50.00 Nos ₹ 349.00 ₹ 17,450.00
113 R2-ME-2-12-u 4C x 25 Sq.mm 38.00 Nos ₹ 360.00 ₹ 13,680.00
114 R2-ME-2-12-v 3.5C x 35 Sq.mm 38.00 Nos ₹ 363.00 ₹ 13,794.00
115 R2-ME-2-12-w 3.5C x 50 Sq.mm 18.00 Nos ₹ 465.00 ₹ 8,370.00
116 R2-ME-2-12-x 3.5C x 70 Sq.mm 6.00 Nos ₹ 602.00 ₹ 3,612.00
117 R2-ME-2-12-ab 3.5C x 185 Sq.mm 6.00 Nos ₹ 2,110.00 ₹ 12,660.00
118 R2-ME-2-12-ac 3.5C x 240 Sq.mm 10.00 Nos ₹ 2,797.00 ₹ 27,970.00
119 R2-ME-2-12-ad 3.5C x 300 Sq.mm 26.00 Nos ₹ 3,805.00 ₹ 98,930.00
120 R2-ME-2-12-ae 3.5C x 400 Sq.mm 1.00 Nos ₹ 5,759.00 ₹ 5,759.00
121 R2-ME-2-12-af 6C x 1.5Sq.mm 10.00 Nos ₹ 179.00 ₹ 1,790.00
122 R2-ME-2-12-ag 6C x 2.5 Sq.mm 10.00 Nos ₹ 183.00 ₹ 1,830.00
1.8 Modular switches and Accessories
Supplying and erecting modular type switch 6A / 10A ISI mark approved make duly erected on provided
123 RBH18-PWD-1-8-1 1,000.00 Nos ₹ 89.00 ₹ 89,000.00
plate and box with wiring connections complete.
Supplying and erecting modular type switch one way 16 / 20 A, ISI mark, approved make duly erected on
124 RBH18-PWD-1-8-7 1,550.00 Nos ₹ 146.00 ₹ 2,26,300.00
provided plate and box with wiring connections complete with neon indicator.
Supplying and erecting modular type 3 pin 6A multi socket with safety shutter ISI mark approved make
125 RBH18-PWD-1-8-10 250.00 Nos ₹ 116.00 ₹ 29,000.00
duly erected on provided plate and box with wiring connections complete.
Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter ISI mark approved
126 RBH18-PWD-1-8-11 1,000.00 Nos ₹ 179.00 ₹ 1,79,000.00
make duly erected on provided plate and box with wiring connections complete.
Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3
127 RBH18-PWD-1-8-37 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per 1,000.00 Nos ₹ 273.00 ₹ 2,73,000.00
required to match the background in an approved manner.
MAINS AND SUBMAINS WIRING, POINT WIRINGWIRING FOR SUBMAINS/ CIRCUIT WIRING
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLSZH insulated copper
R2-ME-3-21
conductor wire in surface/ recessed medium class PVC conduit as required
128 R2-ME-3-21-a 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire in 20mm Conduit 20,000.00 Mtr ₹ 116.00 ₹ 23,20,000.00
129 R2-ME-3-21-b 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire in 20mm Conduit 17,240.00 Mtr ₹ 159.00 ₹ 27,41,160.00
130 R2-ME-3-21-c 2 X 4 sq. mm + 1 X 4 sq. mm earth wire in 25mm Conduit 12,600.00 Mtr ₹ 231.00 ₹ 29,10,600.00
131 R2-ME-3-21-d 2 X 6 sq. mm + 1 X 6 sq. mm earth wire in 25mm Conduit 100.00 Mtr ₹ 317.00 ₹ 31,700.00
132 R2-ME-3-21-k 4 X 4 sq. mm + 2 X 4 sq. mm earth wire in 38mm Conduit 50.00 Mtr ₹ 431.00 ₹ 21,550.00
R2-ME-3-42
copper conductor for earthing & 3 plate ceiling rose) using PVC CONDUIT
133 R2-ME-3-42-a Light /Fan / Ex. fan Points 200.00 Each Pt. ₹ 799.00 ₹ 1,59,800.00
134 R2-ME-3-42-k Group Control Point Wiring 4-8 Points Controlled by One 15 A SP Switch 124.00 Each Pt. ₹ 419.00 ₹ 51,956.00
135 R2-ME-3-42-j 5A/6A - 3/5 Pin Plug On Board 76.00 Each Pt. ₹ 188.00 ₹ 14,288.00
136 R2-ME-3-42-i 15 / 5 A / 6 A Combined Power Plug Socket Point with Fuse and Indicating Lamp, One 15 Amp SP Switch 76.00 Each Pt. ₹ 1,346.00 ₹ 1,02,296.00
Page 46 of 55
S/I/T/C TOTAL
AMOUNT
137 R2-ME-3-42-b 2/3 Pin Independent Plug (IP) 126.00 Each Pt. ₹ 842.00 ₹ 1,06,092.00
R2-ME-3-45 copper conductor for earthing & 3 plate ceiling rose) using CONCEALED MANNER (WITH PVC
CONDUIT PIPES, M.S. BOXES ETC.) POINTS
138 R2-ME-3-45-a Light /Fan / Ex. fan Points 5,500.00 Each Pt. ₹ 881.00 ₹ 48,45,500.00
139 R2-ME-3-45-b 2/3 Pin Independent Plug (IP) 2,000.00 Each Pt. ₹ 909.00 ₹ 18,18,000.00
15 / 5 A / 6 A Combined Power Plug Socket Point with
140 R2-ME-3-45-i 1,200.00 Each Pt. ₹ 1,458.00 ₹ 17,49,600.00
Fuse and Indicating Lamp, One 15 Amp SP Switch
141 R2-ME-3-45-j 5A/6A - 3/5 Pin Plug On Board 2,000.00 Each Pt. ₹ 193.00 ₹ 3,86,000.00
142 R2-ME-3-45-k Group Control Point Wiring 4-8 Points Controlled by One 15 A SP Switch 3,000.00 Each Pt. ₹ 453.00 ₹ 13,59,000.00
143 R2-ME-3-45-c Bell Point with Bell / Buzzer & 1 Bell Push 250.00 Each Pt. ₹ 1,245.00 ₹ 3,11,250.00
144 R2-ME-3-45-d Bell Point With Bell / Buzzer with 1 Bell Push & 1 Indicator 250.00 Each Pt. ₹ 1,307.00 ₹ 3,26,750.00
Point wiring by using FRLSZH insulated copper conductors (alongwith same size of FRLSZH insulated
copper conductor for earthing & 3 plate ceiling rose) : PVC conduit concealed with modular switches
& FRLSZH wires.
145 R2-ME-3-26-b 3/5 Pin Independent Plug (IP) Concealed Manner with Modular switches & FRLSZH wires 700.00 Each Pt. ₹ 992.00 ₹ 6,94,400.00
146 R2-ME-3-26-c 5A/6A - 3/5 Half Plug Concealed Manner with Modular switches & FRLSZH wires 1,620.00 Each Pt. ₹ 278.00 ₹ 4,50,360.00
16SWG GI Junction Box Complete with Earthing terminal, Interconnection & wiring
16 SWG G I Junction Box of various sizes For loop in loop out cables. Junction box shall have suitable no. of
knock out for incoming & outgoing cables. Cables shall be terminated in 10A heavy duty connector. Cost of
the connector shall be included in the cost of Junction box. Colour shade shall be RAL 7032 Siemens gray as
per IS 5. (IP55)
100mm x 100mm x 50mm size GI Junction box with knock out & 1 No. 5Amp. SP switch & 5 Amp. Three Pin
147 R2-ME-1-20-e 50.00 Nos ₹ 131.00 ₹ 6,550.00
Socket for local Isolation
MAINS : - for three - single phase industrial sockets / D.B. to D.B. / panel to UPS and UPS to UPS DB
1.1 KV GRADE COPPER FLEXIBLE WIRE WITH SINGLE PVC INSULATED "METER LEADS" COMPLETE
WITH FLEXIBLE PVC CONDUIT, END TERMINATIONS, CLIPPINGS ETC.:
1.1 kV grade 2 nos. (P+N) copper conductor flexible cable of area 4.0 sq mm and 1no. (E) 2.5 sq. mm
148 R2-ME-1-10-c 10.00 Mtr ₹ 458.00 ₹ 4,580.00
copper cable for 30/32 Amp. single phase switch.
1.1 kV grade 4 nos. (3P+N) copper conductor flexible cable of area 6.0 sq mm and 1no. (E) 2.5 sq. mm
149 R2-ME-1-10-d 250.00 Mtr ₹ 848.00 ₹ 2,12,000.00
copper cable for 30 /32 Amp. three phase switch.
3(PH) nos. single core Cu PVC insulated flexible cable of 25 Sq.mm. for phases & 1 single core Cu PVC
150 R2-ME-1-10-e 200.00 Mtr ₹ 1,468.00 ₹ 2,93,600.00
insulated flexible cable for neutral of 10 Sq.mm. for 63 Amp TPNSS switch.
151 RBH18-PWD-1-1-9 5,000.00 Mtr ₹ 132.00 ₹ 6,60,000.00
Suppling & laying Rigid PVC conduit 25 mm Dia with necessary accessories in RCC work/false
152 RBH18-PWD-1-1-10 1,000.00 Mtr ₹ 107.00 ₹ 1,07,000.00
ceiling/false flooring as per specification No. WG-MA/CC, para no. 1.2.1
153 RBH18-PWD-1-1-11 1,000.00 Mtr ₹ 169.00 ₹ 1,69,000.00
154 RBH18-PWD-1-2-2 30.00 Mtr ₹ 89.00 ₹ 2,670.00
Page 47 of 55
S/I/T/C TOTAL
AMOUNT
155 RBH18-PWD-1-2-3 60.00 Mtr ₹ 101.00 ₹ 6,060.00
156 RBH18-PWD-1-2-6 50.00 Mtr ₹ 194.00 ₹ 9,700.00
General indoor fittings (FG-IDF)
157 R2-ME-4-34-a 1X 18W 220.00 Nos ₹ 538.00 ₹ 1,18,360.00
158 R2-ME-4-34-b 2X 18W 60.00 Nos ₹ 1,076.00 ₹ 64,560.00
159 R2-ME-4-32-b SITC of Downlighter/Wall mounted LED:-9-10 W 250.00 Nos ₹ 585.00 ₹ 1,46,250.00
160 R2-ME-4-32-c SITC of Downlighter/Wall mounted LED:- 12 -13W 1,000.00 Nos ₹ 698.00 ₹ 6,98,000.00
161 R2-ME-4-32-d SITC of Downlighter/Wall mounted LED:-13-18 W 50.00 Nos ₹ 754.00 ₹ 37,700.00
Aviation Light Fittings
Supplying & erecting aviation obstruction light consisting of yellow painted die-cast aluminium alloy
162 RBH18-ELEC-FA-58 housing, red coloured polycorbonate dome and accessories suitable for Twin light on provided bracket 2.00 Nos ₹ 6,058.68 ₹ 12,117.36
complete.
Accessories for Fans (FG-FN)
163 R2-ME-4-12-s Fan safety rope/ Fan wire. 500.00 Nos ₹ 407.00 ₹ 2,03,500.00
FANS (SP-ME-TS-28)
164 R2-ME-4-12-a 10.00 Nos ₹ 2,508.00 ₹ 25,080.00
165 R2-ME-4-12-c 10.00 Nos ₹ 2,508.00 ₹ 25,080.00
166 R2-ME-4-12-d 500.00 Nos ₹ 2,508.00 ₹ 12,54,000.00
Exhaust fan of 305mm sweep, 900/1400RPM, with 750 CFM free air delivery, AC 230V/415V , 50 Hz, single
167 R2-ME-4-12-i 250.00 Nos ₹ 3,209.00 ₹ 8,02,250.40
phase / three phase complete with all necessary accessories for completing installation as per specification.
LIGHTING FIXTURES, INVERTERS, FANS, WATER HEATERS.

T-5 Fixtures (SP-ME-TS-20)
168 R2-ME-4-31-c Garden Light Luminiare Bollard Type. 30.00 Nos ₹ 6,295.00 ₹ 1,88,850.00
S' TYPE HOOK FOR CEILING FANS:
S' type M.S. fan hook fabricated from suitable dia. M.S. rod for fixing ceiling fan by using pair of Anchor
169 R2-ME-4-15-b 100.00 Nos ₹ 229.00 ₹ 22,900.00
fastener.
FIXING OF CEILING FANS WITH EXTENDED 1/2" G.I./ M.S. PIPE WITH SHACKLE MOUNTING ETC.
WITH PAINTING:
Fixing of Ceiling fans with MS down rod, painting etc as required for completing installation as per
170 R2-ME-4-17
specification
171 R2-ME-4-17-c Above 1 mtr. to 1.5 Mtr. 100.00 Set ₹ 439.00 ₹ 43,900.00
ELECTRONIC SIREN 220V A.C. AUDIBLE RANGE:
Electronic siren, single phase 230V AC,6000rpm , horizontal mounting , with weather shade with complete
172 R2-ME-4-18
installation as per specification.
173 R2-ME-4-18-b Audible range 1.0 km. 1.00 Nos ₹ 6,985.00 ₹ 6,985.00
Page 48 of 55
S/I/T/C TOTAL
AMOUNT
174 R2-ME-4-20-b Standard Industrial type Fly killer with M.S. body, 4 X 20W tube and approx. area covered: 2000 sq.ft. 2.00 Nos ₹ 4,992.00 ₹ 9,984.00
175 R2-ME-4-34-e LED Bulkhead fitting 60.00 Nos ₹ 1,162.00 ₹ 69,720.00

HIGHMAST, POLES & ACCESSORIES
Poles : (As per IS 2713 - Part II 1980, Swedged pole made from steel of ultimate steel tensile 410 Mpa
(42 Kgf/Sq.mm.))(SP-ME-TS-13)
176 R2-ME-10-5-e 10.00 Nos ₹ 53,892.00 ₹ 5,38,920.00
177 R2-ME-10-5-f 5.00 Nos ₹ 66,258.00 ₹ 3,31,290.00
178 R2-ME-10-5-g 10.00 Nos ₹ 78,928.00 ₹ 7,89,280.00
Brackets
Providing & erecting single arm standard bracket 1000MM long made up of 40 NB GI pipe suitable for
179 R2-ME-10-6-a 10.00 Nos ₹ 7,485.00 ₹ 74,850.00
Providing & erecting double arm standard bracket 1000MM long made up of 40 NB GI pipe suitable for
180 R2-ME-10-3-b 10.00 Nos ₹ 5,861.00 ₹ 58,610.00
C.I.Junction Boxes
Providing, fixing and connecting weather proof pole mounting cast iron box, hinged door with locking
arrangement, complete with MCB cutouts, terminal block mounting arrangement etc. Box shall be duly
painted in approved manner . Cost of painting is included in cost of C.I. Box.
Cast Iron Junction box complete with 2way terminal or connector block and 6A SP MCB. Box size shall not
181 R2-ME-10-4-b 5.00 Nos ₹ 4,884.00 ₹ 24,420.00
be less than 6" x 5" (150 mm x 125 mm)
Cast Iron Junction box complete with c 2way terminal or connector block and 6A SP MCB. Box size shall not
182 R2-ME-10-4-c 10.00 Nos ₹ 6,056.00 ₹ 60,560.00
be less than 8" x 5" (200 mm x 125 mm.)
183 R2-ME-4-27-e SITC of LED Street Light fittings:- 70-90 W 10.00 Nos ₹ 5,774.00 ₹ 57,740.00
184 R2-ME-4-27-b SITC of LED Street Light fittings:- 24-36 W 5.00 Nos ₹ 2,223.00 ₹ 11,115.00
185 R2-ME-4-27-c SITC of LED Street Light fittings:- 36-48 W 10.00 Nos ₹ 4,071.00 ₹ 40,710.00
186 R2-ME-4-29-a SITC of LED Post top Lantern/ Handi type- 50 W with Pole 10.00 Nos ₹ 9,343.00 ₹ 93,430.00
187 BAH-ELEC-FA-46 SITC of Shrub uplighter 8 to 13 watt led waterproof with all acessories etc. 15.00 Nos ₹ 3,500.00 ₹ 52,500.00
188 BAH-ELEC-FA-47 SITC of Tree uplighter 8 to 13 watt led waterproof with all acessories etc. 15.00 Nos ₹ 3,800.00 ₹ 57,000.00
189 RBH18-ELEC-FA-62 Supply, Installation testing and commissioning of 40W LED 2' x 2' ft, Direct - Indirect Light fixture 10.00 Nos ₹ 7,021.48 ₹ 70,214.80
EARTHING, LIGHTNING PROTECTION.

Earthing (SP-ME-TS-37)
Page 49 of 55
S/I/T/C TOTAL
AMOUNT
600 X 600 X 3.15 mm Copper Plate, 3000mm dip with suitable size cu strip earth pit as per IS 3043. The
earth pit shall be provided with watering pipe (Class B) with wire messed funnel, 12 SWG cu wire upto
190 R2-ME-7-1-d chamber, disconnecting links with 600 x 600 mm (clear) RCC chamber & 3mm thick heavy duty CI chequered 8.00 Nos ₹ 23,434.00 ₹ 1,87,472.00
plate cover with hinge. Bentonite shall be provided for earth pits. Excavation, backfilling, removal of excess
soil is included in the scope
Earthing station with 600 mm x 600 mm x 6 mm galvanised iron plate & 50 mm dia. G.I. pipe, 3000mm long
GI pipe (Class B or better) earth pit as per IS 3043. The earth pit shall be provided with watering pipe (Class
B) with wire messed funnel, 25x3 GI strip/ / 2X8SWG G.I. wire up to chamber (wire or strip size as per fault
191 R2-ME-7-1-c level), disconnecting links with 600 x 600 mm (clear) 18.00 Nos ₹ 17,789.00 ₹ 3,20,202.00
RCC chamber & heavy duty 3mm thick CI chequered plate cover with hinge & stainless steel bolts.
Bentonite/ Charcol & Salt shall be provided for earth pits. Excavation, back filling, removal of excess soil is
Test links
Supply and installation of following size Test Links with required wiring and other accessories to complete
the work.
192 R2-ME-7-3-c 25 x 3 mm Cu (length : 300 mm) 25.00 Nos ₹ 234.00 ₹ 5,850.00
193 R2-ME-7-3-e 50 x 6 mm GI (length : 300 mm) 10.00 Nos ₹ 86.00 ₹ 860.00
Earthing Continuity Conductors
Supply & installation of Earth conductor of the following sizes to be cleated on wall / columns with nuts &
bolts or laid in cable tray / buried in ground including cutting, drilling, tapping, jointing by welding,
connecting to equipments, painting to
welded portion by black bitumen paint and with all necesary GI
hardware & accessories to complete the work
194 R2-ME-7-4-a 25 x 3mm Tinned copper 50.00 Mtr ₹ 780.00 ₹ 39,000.00
195 R2-ME-7-4-c 25 x 6mm Tinned copper 25.00 Mtr ₹ 1,568.00 ₹ 39,200.00
196 R2-ME-7-4-e 25 x 3mm GI 300.00 Mtr ₹ 49.00 ₹ 14,700.00
197 R2-ME-7-4-f 25 x 6mm GI 2,000.00 Mtr ₹ 97.00 ₹ 1,94,000.00
198 R2-ME-7-4-g 50 x 6mm GI 350.00 Mtr ₹ 195.00 ₹ 68,250.00
199 R2-ME-7-4-k Bare Copper Conductor size 8 SWG 400.00 Mtr ₹ 125.00 ₹ 50,000.00
200 R2-ME-7-4-m Bare G.I. Conductor size 8 SWG 1,500.00 Mtr ₹ 9.00 ₹ 13,500.00
201 RBH18-PWD-1-3-4 50.00 Mtr ₹ 44.00 ₹ 2,200.00
202 RBH18-PWD-1-3-6 25.00 Mtr ₹ 66.00 ₹ 1,650.00
203 RBH18-PWD-1-3-8 1,000.00 Mtr ₹ 89.00 ₹ 89,000.00
204 RBH18-PWD-1-3-10 50.00 Mtr ₹ 125.00 ₹ 6,250.00
Page 50 of 55
S/I/T/C TOTAL
AMOUNT
205 RBH18-PWD-1-3-12 38.00 Mtr ₹ 212.00 ₹ 8,056.00
206 RBH18-PWD-1-3-20 25.00 Mtr ₹ 313.00 ₹ 7,825.00
conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG
207 RBH18-PWD-1-3-21 conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW (Note : 50.00 Mtr ₹ 618.00 ₹ 30,900.00
Derived from item (1-3-12)
Providing & laying Hume pipe across road or below the plinth beams and buried cable protection
Supply and laying of Heavy duty RCC Hume pipe for road crossing, below plinth beam of following size as
diameter.
208 R2-ME-2-19-b 150mm Dia. 50.00 Mtr ₹ 611.00 ₹ 30,550.00
209 R2-ME-2-19-d 300mm Dia. 50.00 Mtr ₹ 1,113.00 ₹ 55,650.00
Supplying & laying I.S.I. mark 'B' class GI Pipe for surface/ under ground cable protection
210 R2-ME-2-21-f 50 mm dia. 50.00 Mtr ₹ 765.00 ₹ 38,250.00
211 R2-ME-2-21-g 65 mm dia. 20.00 Mtr ₹ 969.00 ₹ 19,380.00
212 R2-ME-2-21-h 80 mm dia. 20.00 Mtr ₹ 1,245.00 ₹ 24,900.00
213 R2-ME-2-21-i 100 mm dia. 25.00 Mtr ₹ 1,775.00 ₹ 44,375.00
Supply & Laying of double wall corrugated ( DWC) pipes of HDPE for underground cable protection
Supply & Laying of double wall corrugated ( DWC) pipes of HDPE for underground cable protection as per
R2-ME-2-22 IS 14930 Part II. With necessary connecting socket/couplings, tees of some material at required depth up to
900 mm below road ground surface. backfilling of with light ramming is included in the scope.
214 R2-ME-2-22-a 50 mm OD / 38 mm I.D. 100.00 Mtr ₹ 226.00 ₹ 22,600.00
215 R2-ME-2-22-g 145 mm OD / 126 mm I.D. 25.00 Mtr ₹ 686.00 ₹ 17,150.00
216 R2-ME-2-22-j 200 mm OD / 175 mm I.D. 25.00 Mtr ₹ 1,108.00 ₹ 27,700.00
Sheet Moulding compound (SMC) Junction Box, for Outdoor Use
217 R2-ME-1-21-a SMCJB - 1414, Hinged cover, Size 170 x 170 x 105mm 20.00 Nos ₹ 1,253.00 ₹ 25,060.00
Supplying and erecting Iron work consisting of Various sections of MS and including Plates, Chequered
Plates, Rods, Bars, MS pipes, etc. for panel board or any other purposes complete with bending, cutting,
218 RBH18-PWD-6-1-20 150.00 KG ₹ 135.00 ₹ 20,250.00
drilling and welding complete erected at the position with necessary materials duly painted with one coat of
red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority
Lightning Protection System
Page 51 of 55
S/I/T/C TOTAL
AMOUNT
Supply, Installation testing and commissioning of Vertical Aluminum Air terminal of Length 1000 mm along
219 BAH-ELEC-FA-48 6.00 Nos ₹ 10,580.00 ₹ 63,480.00
with the round gun metal base plate and 3+2 mtr Gi pipe to make it of 5 mtr.
Supply, Installation testing and commissioning of Vertical aluminium Lighting Arrester of 16 mm dia, 1000
220 BAH-ELEC-FA-49 8.00 Nos ₹ 5,500.00 ₹ 44,000.00
mm long with Gun Metal base plate
Supply, Installation testing and commissioning of 8 mm round aluminium conductor for horizontal lightning
221 BAH-ELEC-FA-50 250.00 Mtr ₹ 200.00 ₹ 50,000.00
protection - run in roof.
Supply, Installation testing and commissioning of roof conductor holder for 8 mm round aluminium
222 BAH-ELEC-FA-51 conductor made of Gun Metal for horizontal installation. The distance between each holder should be min 250.00 Nos ₹ 150.00 ₹ 37,500.00
of 1 mtr.
Supply, Installation testing and commissioning ofT connector for connecting of 8 mm Al round conductor .
223 BAH-ELEC-FA-52 50.00 Nos ₹ 425.00 ₹ 21,250.00
The connector should be of Gun Metal with SS nuts and bolt.
Supply, Installation testing and commissioning of Cross connector for connecting of 8 mm Al round
224 BAH-ELEC-FA-53 25.00 Nos ₹ 435.00 ₹ 10,875.00
conductor . The connector should be of Gun Metal with SS nuts and bolt.
Supply, Installation testing and commissioning of Expansion piece along with connector to compensate the
225 BAH-ELEC-FA-54 15.00 Nos ₹ 490.00 ₹ 7,350.00
expansion of round 8 mm Al conductor when temperature variation . Connection should be in every 20 mtr.
226 BAH-ELEC-FA-55 Supply, Installation testing and commissioning of GLUE-is used to fix roof conductor holder on roof 35.00 Nos ₹ 350.00 ₹ 12,250.00
Supply, Installation testing and commissioning of 8 mm round aluminium conductor as a down conductor
227 BAH-ELEC-FA-56 1,300.00 Mtr ₹ 135.00 ₹ 1,75,500.00
mounted in the surface of wall which will carry the lightning current to earth pit.
Supply, Installation testing and commissioning of Down conductor holder for 8 mm round aluminium
228 BAH-ELEC-FA-57 conductor of min distance between the wall to the conductor will be of 85 mm. The distance between each 1,300.00 Nos ₹ 145.00 ₹ 1,88,500.00
holder should be min of 1 mtr.
Supply, Installation testing and commissioning of straight connector for connecting of 8 mm Al round
229 BAH-ELEC-FA-58 20.00 Nos ₹ 390.00 ₹ 7,800.00
conductor . The connector should be of Gun
230 BAH-ELEC-FA-59 Supply, Installation testing and commissioning of 6 digit lightning strike counter. 1.00 Nos ₹ 7,300.00 ₹ 7,300.00
Supply, Installation testing and commissioning of Test Joint Point for 8 mm round aluminium conductor ,
231 BAH-ELEC-FA-60 15.00 Nos ₹ 3,450.00 ₹ 51,750.00
the size should be of 25 x 3 x 150 mm copper in ABS boxes.
Page 52 of 55
S/I/T/C TOTAL
AMOUNT
Supply, Installation testing and commissioning of UL LISTED low carbon high tensile steel rod with copper
coating of min 254 micron JK Chemrode -JK0110 CBR the dia should be 25.4 mm with length of 10 feet (
3000 mm) . The rod shall be as per IEC 62561-2 and approved by UL 467. The rod shall be tested fromCPRI
lab for current discharge 50kA peak. - JK0110CBR
232 BAH-ELEC-FA-61 15.00 Set ₹ 8,350.00 ₹ 1,25,250.00
The Chemrode shall be surrounded with 25 kg (2 bag) of Earth enhance materiel JK Reslow according to
IEC 62561-7 and the Chemical resistance value shall not increase more then 0.067 Ωm along with earth pit
chamber made up polyplastic. Size of -254x330x260 MM earth pit chamber cover should be tested and
certified for 9tonne load bearing capacity from any central government lab (national test house Gaziabad
233 BAH-ELEC-FA-62 Supply, Installation testing and commissioning of GI STRIP ( 25X6 MM ) - For earthing interconnection 200.00 Mtr ₹ 180.00 ₹ 36,000.00
234 R2-ME-4-11-f Inverter of 10KVA,single phase input and output with Tubular Battery(12X10) 200 AH Duration 4 Hrs. 1.00 Nos ₹ 3,50,137.00 ₹ 3,50,137.00
DG SET
235 R2-ME-6-17-o 250kVA DG Set 1.00 Nos ₹ 19,04,666.00 ₹ 19,04,666.00
236 R2-ME-6-18-p 250kVA 1.00 Nos ₹ 2,07,560.00 ₹ 2,07,560.00
TOTAL AMOUNT HT & LT ELECTRICAL WORKS (In Rs.) ₹ 6,12,83,969.08

Say ₹ 6,12,83,970.00
Page 53 of 55
BILL OF QUANTITIES ELEVATOR WORKS - RESIDENTIAL BUILDING
S/I/T/C S/I/T/C TOTAL
SR.NO REF. CODE DESCRIPTION QTY UNIT
RATE AMOUNT
FAIR ITEM SITC of Electric Traction Passenger Lift with 6.00 Nos ₹ 27,83,302 ₹ 1,66,99,812.00
· Car/Landing door clear opening of 1000mm wide x 2000 mm high
· Lift shaft available having clear size of ......mm wide x ......mm deep,......mm Pit depth, ………mm Overhead.
Page 54 of 55
S/I/T/C S/I/T/C TOTAL
SR.NO REF. CODE DESCRIPTION QTY UNIT
RATE AMOUNT
FAIR ITEM SITC of Electric Traction Passenger Lift with 6.00 Nos ₹ 27,83,302 ₹ 1,66,99,812.00
1 such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor
and travel direction protection, protection for phase loss at input or output etc. ,various operation modes
such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling
operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake
operation, door open/close operation from COP etc. The system can record information for minimum 30
latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of
parameters, The control panel duly wired with proper size & strength, copper wire for power & control
circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of
1.5mm CRCA sheet with powder coating with IP54
Protection class.
· CCTV surveillance system comprises of 2 nos minimum 2.0MP FHD IP based vandal proof Dome camera in
lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with
HDR data backup for min. 90 days with min. 20" FHD TV monitor, to be kept in
FCC/LMR as directed by Engineer In Charge.
ladder etc. erected with necessary steel work.
· Minor civil work such as alteration work if any necessary for erection of landing door frames and it's
accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection
of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and
fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete
For Lift having 900mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded)
2 FAIR ITEM indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main 72.00 Floors ₹ 1,52,608 ₹ 1,09,87,776.00
hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe
functioning of lift installation complete.
TOTAL AMOUNT ELEVATORS (In Rs) ₹ 2,76,87,588.00
Page 55 of 55

Eth - 7000024824 - Electrical Boq

Uploaded by

Copyright:

Available Formats

Eth - 7000024824 - Electrical Boq

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Eth - 7000024824 - Electrical Boq

Uploaded by

Copyright:

Available Formats

MUNICIPAL CORPORATION OF GREATER MUMBAI

PROPOSED BMC GENERAL HOSPITAL & STAFF QUARTERS

A. SUMMARY - ELECTRICAL SYSTEM HOSPITAL BUILDING

1 ELECTRICAL SYSTEM ₹ 29,40,17,367.00

3 AUDIO SYSTEM ₹ 5,53,07,271.00

4 VISUAL PROJECTION ₹ 5,27,16,622.00

5 STAGE LIGHTING ₹ 20,53,570.00

B. SUMMARY - ELECTRICAL RESIDENTIAL BUILDING

1 ELECTRICAL SYSTEM ₹ 6,12,83,970.00

GRAND TOTAL (A+B) ₹ 53,84,00,464.00

25 BAH-ELEC-FA-14 SITC of OT PANEL-2 As per SLD 1.00 Nos 7,18,489.00 7,18,489.00

G.I. Cable tray with all other accessories : Perforated Type

SWITCHGEARS, MCB DB, PANELS

LIGHTING FIXTURES, INVERTERS, FANS, WATER HEATERS.

249 R2-ME-4-34-e LED Bulkhead fitting 250.00 Nos 1,162.00 2,90,500.00

EARTHING, LIGHTNING PROTECTION.

295 R2-ME-2-22-a 50 mm OD / 38 mm I.D. 440.00 Mtr 226.00 99,440.00

Lightning Protection System

TOTAL AMOUNT HT & LT ELECTRICAL WORKS (In Rs.) 29,40,17,366.14

SITC of Electric Traction Passenger cum Stretcher/Hospital Lift with

SITC of Electric Traction Passenger Lift with

TOTAL AMOUNT ELEVATORS (In Rs) 4,53,34,076.00

G.I. Cable tray with all other accessories : Perforated Type

G.I. Trunking / Duct / Raceway & all other accessories

SWITCHGEARS, MCB DB, PANELS

LIGHTING FIXTURES, INVERTERS, FANS, WATER HEATERS.

175 R2-ME-4-34-e LED Bulkhead fitting 60.00 Nos ₹ 1,162.00 ₹ 69,720.00

EARTHING, LIGHTNING PROTECTION.

Lightning Protection System

TOTAL AMOUNT HT & LT ELECTRICAL WORKS (In Rs.) ₹ 6,12,83,969.08

TOTAL AMOUNT ELEVATORS (In Rs) ₹ 2,76,87,588.00

You might also like