Bagi 'CPC - PDF'

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Fault

System
Code
CPC CPC Common Powertrain Controller
No CAN message from ABS Anti-lock Braking System or BS brake control (EPB) or
CPC 110
message incorrect
CPC 111 No or incorrect CAN message from control unit GS Gear control

CPC 112 No or incorrect CAN message from control unit KS clutch control

CPC 113 No or incorrect CAN message from control unit RS Retarder control

CPC 114 No or incorrect CAN message from control unit INS Instrument

CPC 115 No or incorrect CAN message from control unit PSM Parameterizable Special Module

CPC 117 No or incorrect CAN message from control unit WSK torque converter-clutch

CPC 119 No or incorrect CAN message from control unit KWS Articulation angle control

CPC 180 No or incorrect CAN message from control unit ART autonomous intelligent cruise control

CPC 201 Engine CAN bus is in the single-wire mode.

CPC 202 No or incorrect CAN message from control unit MR engine control

CPC 203 Open circuit in CAN link to control unit MR engine control.

CPC 416 High speed CAN bus has failed for more than 100 ms.

CPC 418 High speed CAN bus has failed.

CPC 501 Transmission CAN databus in single-wire mode

CPC 508 Transmission CAN databus is not supplying any data.

CPC 584 Impairment of function 'KR'

CPC 681 CAN data:Failure of module AGE automatic gear determination

CPC 682 Fault in data communication.Control unit AGE in limp-home mode

CPC 783 Fault in data communication.Diagnosis channel not free

CPC 1120 Connection 'D+' has Short circuit to positive.

CPC 1125 Connection 'D+' at pin IV 18/13 is implausible or has Open circuit or Short circuit to ground.

CPC 1223 Clutch pedal switch 1 at pin I 18/1 has Open circuit or is incorrectly adjusted.

CPC 1421 Brake light switch has Open circuit or is incorrectly adjusted.

CPC 1423 Brake light switch at pin II 18/7 has short circuit.

CPC 1523 Cruise control Temposet switch is faulty.

CPC 1524 Cruise control Temposet switch is faulty.


CPC 1526 Input 'Quit' of cruise control switch is open.

CPC 1623 Clutch pedal switches 1 and 2: incorrect adjustment or switches sticking

CPC 1723 Neutral position switch at pin IV 18/16 is faulty or stuck.

CPC 1923 Splitter switch at pins II 18/11 and II 18/12 has Open circuit or is faulty.

CPC 2023 Engine brake switch of "Engine control / continuous brake" operating lever faulty

CPC 2120 Square-wave output GSV 1 (pulsed switch supply) has Short circuit to positive.

CPC 2122 Square-wave output GSV 1 (pulsed switch supply) has Short circuit to ground.

CPC 2520 Switch group 1/4 has Short circuit to positive.

CPC 2522 Switch group 1/4 has Short circuit to ground.

CPC 2620 Switch group 2/3 has Short circuit to positive.

CPC 2622 Switch group 2/3 has Short circuit to ground.

CPC 2720 Output to oil level switch (3-channel ABS) has Short circuit to positive.

CPC 2823 Double operation of ART pushbuttons

CPC 2923 Sensor unit GS: switch position is implausible.

CPC 2927 Button 'Neutral/Funktion/+/-' of sensor unit GS Gear control is jammed.

CPC 2928 Sensor unit GS: switch is inoperative.

CPC 2929 Button 'M/A' of sensor unit GS Gear control is jammed.

CPC 3021 Circuit 30 has Open circuit.

CPC 3031 Overvoltage at terminal 30

CPC 3032 Undervoltage at terminal 30


Coolant level switch 15B01 or air filter monitoring sensor 10B19 faulty, voltage supply III-
CPC 3130
21/3 has Open circuit or Short circuit to positive or Short circuit to ground.
CPC 3233 Air filter monitoring sensor faulty

CPC 3236 Soiling limit of air cleaner is reached.


Ambient air temperature sensor has Open circuit or Short circuit to positive or Short circuit
CPC 3330
to ground.
CPC 3430 Sensor fault at clutch travel sensor

CPC 3634 Maximum wear of clutch lining is reached.

CPC 3635 Clutch position sensor not within permissible range

CPC 4041 'Terminal W' signal is implausible.

CPC 4141 'Transmission input speed' signal is implausible.


Transmission input speed sensor has Open circuit or Short circuit to positive or Short
CPC 4145
circuit to ground.
CPC 4341 Invalid speed signal

CPC 4345 V-signal input has Open circuit or Short circuit to positive or Short circuit to ground.
The first branch of the foot throttle actuator has Open circuit or Short circuit to positive or
CPC 4440
Short circuit to ground.
The second branch of the foot throttle actuator has Open circuit or Short circuit to positive
CPC 4540
or Short circuit to ground.
CPC 4641 Foot throttle actuator faulty

CPC 4642 Foot throttle actuator does not reach idle throttle stop.

CPC 4643 Foot throttle actuator not within learned range

CPC 4644 Foot throttle actuator stiff in operation

CPC 5052 Solenoid valve 1 (actuation of engine brake 1) has Short circuit to ground.

CPC 5053 Solenoid valve 1 (actuation of engine brake 1) has Short circuit to positive.

CPC 5054 Solenoid valve 1 (actuation of engine brake 1) has Open circuit.

CPC 5152 Solenoid valve 2 (actuation of engine brake 2) has Short circuit to ground.

CPC 5153 Solenoid valve 2 (actuation of engine brake 2) has Short circuit to positive.

CPC 5154 Solenoid valve 2 (actuation of engine brake 2) has Open circuit.

CPC 5252 MBA engine brake output valve connection has Short circuit to ground.

CPC 5253 MBA engine brake output valve connection has Short circuit to positive.

CPC 5352 Splitter solenoid valve 1 has Short circuit to ground.

CPC 5353 Splitter solenoid valve 1 has Short circuit to positive.

CPC 5354 Splitter solenoid valve 1 has Open circuit.

CPC 5452 Splitter solenoid valve 2 has Short circuit to ground.

CPC 5453 Splitter solenoid valve 2 has Short circuit to positive.

CPC 5454 Splitter solenoid valve 2 has Open circuit.

CPC 5552 Output IV 18/7 or IV 18/9 has Short circuit to ground.

CPC 5553 Output IV 18/7 or IV 18/9 has Short circuit to positive.

CPC 5652 'Brake light actuation' output has Short circuit to ground.

CPC 5653 'Brake light actuation' output has Short circuit to positive.

CPC 5654 'Brake light actuation' output has Open circuit.

CPC 5752 'Reversing light actuation' output has Short circuit to ground.
CPC 5753 'Reversing light actuation' output has Short circuit to positive.

CPC 5754 'Reversing light actuation' output has Open circuit.

CPC 5852 'Actuation of D+' output has Short circuit to ground.

CPC 5853 'Actuation of D+' output has Short circuit to positive.

CPC 5854 'Actuation of D+' output has Open circuit.

CPC 5952 'Automatic engine oil replenishment' actuation has Short circuit to ground.

CPC 5953 'Automatic engine oil replenishment' actuation has Short circuit to positive.

CPC 5954 'Automatic engine oil replenishment' actuation has Open circuit.

CPC 6163 Software incompletely loaded.

CPC 6262 Control module has an internal error.

CPC 6265 Control module has an internal error.

CPC 6365 Control module has an internal error.

CPC 7060 Control module has an internal error.

CPC 7061 Configuration of the engine brake is implausible

CPC 7064 Control module has an internal error.

CPC 7070 Accelerator pedal unit not learned

CPC 7071 Learning error with splitter ratio

CPC 7072 Learning error with terminal W ratio

CPC 7073 Learning error with clutch travel sensor

CPC 7074 Learning error at vehicle CAN bus

CPC 8023 HL5Switch position IMPLAUSIBLE

CPC 8152 Engine oil-OutputShort circuit to positive

CPC 8153 Engine oil-OutputOpen circuit

You might also like