BS

Fault code Fault code Description
0160 Data communication regarding the vehicle CAN is disturbed.

0162 The CAN 'signal v' tachograph message is wrong.
0180 missing data on the CAN bus vehicle 'ASR'
0181 missing data on the CAN bus vehicle 'SMR function'
0182 missing data on the CAN bus vehicle 'permanent brake integration'
0183 missing data in the vehicle CAN bus 'brake stops'
0184 missing data on the CAN bus vehicle 'blockade against possible movement'
0185 missing data on the CAN bus vehicle 'stability control'
CAN 0260 trailer signal is wrong.
CAN 0263 trailer signal is interrupted.
0275 CAN high trailer damaged.
0276 CAN-Low trailer damaged.
0300 total failure of the brake CAN bus
0360 The CAN bus is faulty brake system.
1001 Overvoltage in the terminal 15
Under voltage 1002 contacts or terminals 15, 30a and 30b
BS 1010 Control unit management (braking) is faulty.
1011 The EEPROM unit component management control braking BS is defective.
BS 1012 Control unit management (braking) is parameterized incorrectly.
BS 1014 Control Unit: implausible data FDR / LWS / AM modules
1052 reprogramming process: control unit
1094 different tires on the vehicle
1102 Under voltage or contacts at terminal 30a
1103 The terminal has an interruption 30a.
1202 Under voltage or contacts on the terminal 30b
1203 The terminal 30b has an interruption.

1302 Under voltage or contacts on terminal 15
1404 The sensor supply '24 V 'is shorted to ground.
1405 The sensor supply '24 V 'is shorted to positive.
1505 Power supply modulator has a short axis against the positive pole.
BS 1604 Control unit management (braking) is shorted to ground at output X2 15/1
5.
BS 1605 Control unit management (braking) is shorted to the positive pole on the
X2 15/15 sa outlet.
2003 ASR solenoid valve has an interruption.
2004 ASR solenoid valve is shorted to ground.
2005 ASR solenoid valve is shorted to positive.
2012 ASR shutdown is parameterized incorrectly.
The valve 2203 has an interruption redundancy.
2204 redundancy valve is shorted to ground.
2205 redundancy valve has a short circuit against the positive pole.
2291 Pressure valve redundancy by redundancy 'rear axle' has not been retained
2404 redundancy valve front axle is shorted to ground.
2405 redundancy valve front axle is shorted to positive.
2407 redundancy valve front axle is shorted to ground.
2408 redundancy valve front axle is shorted to positive.
2409 redundancy valve front axle has an interruption.
2429 redundancy valve front axle has a separate excitement.
3020 The ABS solenoid valve on the front axle, right side, has a break in the IJA clav
3.
Copyright DaimlerChrysler AG 06.09.2006 CD-Ausgabe G / 08/06. This WIS print is
not registered by the service changes. Page 1
3021 The ABS solenoid valve on the front axle, right side is shorted to ground on pin
3.
3022 The ABS solenoid valve on the front axle, right side is shorted against pol or
positive on pin 3.
3023 The ABS solenoid valve on the front axle, right side, has a break in ija 2 clav.
3026 The ABS solenoid valve on the front axle, right side, has a break in the IJA clav
one.
3027 The ABS solenoid valve on the front axle, right side is shorted to ground on pin
1.
3028 The ABS solenoid valve on the front axle, right side is shorted against pol or
positive pin 1.
3029 The ABS solenoid valve on the front axle, right, is alien activation.
3120 The ABS solenoid valve on the front axle, left side, you have a gap in Avija 3 cl.
3121 The ABS solenoid valve on the front axle, left side, is shorted to ground on pin
3.
3122 The ABS solenoid valve on the front axle, left side, has positive short against p
olo on pin 3.
3123 The ABS solenoid valve on the front axle, left side, you have a gap in Avija 2 cl.
3126 The ABS solenoid valve on the front axle, left, has a break in one Avija cl.
3127 The ABS solenoid valve on the front axle, left side, is shorted to ground on pin
1.
3128 The ABS solenoid valve on the front axle, left side, has positive short against p
olo on pin 1.
3129 The ABS solenoid valve on the front axle, left side, is alien activation.
3604 The ABS solenoid valves on the front axle, left and right, have a short circuit or
circuit to ground on pin
2.
3605 The ABS solenoid valves on the front axle, left and right, have a short circuit or
circuit against the positive pole
pin 2.
4040 The speed sensor on the front axle, right side, you have a gap.
4041 The speed sensor on the front axle, right side, has a short circuit to ground
contr.
4042 The speed sensor on the front axle, right side, has a contr to the positive pole
short.
4044 The speed sensor on the front axle, right, has shorted turns.
4045 The pole wheel on the front axle, right, is faulty.
4046 Rattle in the sensor speed of the front axle, right
4047 The pole wheel on the front axle, right, is staggering.
4048 The speed sensor on the front axle, right, has gap.
Wheel speed 4049 rpm of 'front axle, right' sensor, implausible
4140 The speed sensor on the front axle, left side, you have a gap.
4141 The speed sensor on the front axle, left, has a short circuit against mass.
4142 The speed sensor on the front axle, left, has a short circuit against the positive
pole.
The sensor 4144 rpm in the, left, front axle has shorted turn s.
4145 The polar wheel on the Left, front axle is faulty.
4146 Rattle in the sensor speed of the front axle, left
4147 The polar wheel on the Left, front axle has wobble.
The sensor 4148 rpm in the, left, front axle has gap.
Wheel speed 4149 rpm of 'front axle left "sensor, implausible
4240 The speed sensor on the rear axle, right side, you have a gap.
4241 The speed sensor on the rear axle, right side is shorted to ground.
4242 The speed sensor on the rear axle, right side is shorted to positive.
4244 The speed sensor on the rear axle, right, has shorted turns.
4245 The pole wheel on the rear axle, right, is faulty
4246 Rattle in the speed sensor on the rear axle, right
4247 The pole wheel on the rear axle, right, is staggering.
4248 The speed sensor on the rear axle, right, has gap.
4249 implausible speed wheel speed sensor on the rear axle, right
4340 The speed sensor on the rear axle, left side, you have a gap.
4341 The speed sensor on the rear axle, left, has a short circuit to ground contr.
4342 The speed sensor on the rear axle, left, has a contr to the positive pole short.
The signal sensor 4343 of the rear axle, left, not measurable
4344 sensor shorted turns the rear axle, left
4345 The pole wheel at the rear, left, is faulty
4346 rattle in the speed sensor of the rear axle, left
4347 Polar Wobble back wheel, left
4348 rpm sensor back, left, interstitium
4349 implausible speed of wheel speed sensor on the rear axle, side izquier do
6000 braking value transmitter, broken
6092 braking value transmitter: synchronization signal wrong
6140 brake light switch K1: signal has an interruption.
6141 brake light switch K1: signal is shorted to ground.
6240 brake light switch K2: signal has an interruption.
6241 brake light switch K2: signal is shorted to ground.
6341 braking value transmitter K1: pedal position is shorted to ground.
6343 braking value transmitter K1: pedal position does not transmit any signal.
6441 braking value transmitter K2: pedal position is shorted to ground.
6443 braking value transmitter K2: pedal position does not transmit any signal.
7000 The proportional relay valve is faulty
The proportional valve 7096 and relay has a value of pressure implausible.
7104 The proportional valve relay is shorted to ground on pin X4 12/1.
7105 The proportional relay valve is shorted to the positive pole on pin X4 12/1.
7107 The proportional valve relay is shorted to ground on pin X4 12/2.
7108 The proportional relay valve is shorted to the positive pole on pin X4 12/2.
7109 The proportional relay valve is a disruption in the X4 X4 12/1 and 12/2 pin.
7129 The proportional relay valve and others have excitement.
7242 proportional relay valve: pressure sensor has a short circuit to positive.
7243 proportional relay valve: pressure sensor has an interruption, any signs or uito
Short Circuit.
Modulator 7300 propeller shaft damaged
7313 Modulator axis: is mounted the wrong model
7314 The modulator output shaft provided no plausible data.
7364 Data communication in the CAN bus brake is disturbed
7365 Data communication between the modulator and sensor axis angle of the
steering wheel DDRESS / electronic FDR is
disturbed
Modulator 7392 rear axle: signal synchronization faulty
7395 Modulator axis: auxiliary pressure regulation
7500 trailer control valve, faulty
7512 The trailer control valve is wrongly parameterized.
7596 The trailer control valve has a pressure value not plausible.
7604 The trailer control valve is shorted to ground on pin 15/10 X2.
7605 The trailer control valve is shorted to the positive pole on pin X2 15/1 0.
7607 The trailer control valve is shorted to ground on pin 15/11 X2.
7608 The trailer control valve is shorted to the positive pole on pin 1 X2 15/1.
7609 The trailer control valve has an interruption on pin X2 or X2 15/10 15/11.
7629 The trailer control valve is excited others.
7742 trailer control valve: pressure sensor has a short circuit to positive.
7743 trailer control valve: pressure sensor has an interruption, any signs or uito
Short Circuit.
8090 Circuit brake on the rear axle: redundancy has failed
8193 Thermal overload of brake wheel
8290 Circuit Brake front axle: failed the effect of redundancy
8570 Order symbol: parking brake
9002 The electronic system of the dynamic regulation of travel (FDR) has
undervoltage at terminal X2 15/15.
Internal Error 9010 module FDR
Error 9011 FDR EEPROM module
9012 FDR wrong parameterization module
9013 There is an incorrect FDR mounted electronics.
9051 Electronic FDR has an incorrect assembly position.
9052 The operation of reprogramming of electronic FDR has not been concluded.
9064 The communication between brake modules CAN bus is disturbed.
9502 The steering wheel angle sensor is low voltage.
9510 The steering wheel angle sensor is faulty.
9512 The steering wheel angle sensor is configured incorrectly in the control unit of
the braking gesti n BS.
9543 The steering wheel angle sensor does not provide any measurement value.
9550 angle sensor delivers the steering wheel implausible data.
9563 Communication between modules CAN bus brake is disturbed.

BS

Uploaded by

Copyright:

Available Formats

BS

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

BS

Uploaded by

Copyright:

Available Formats

Fault code Fault code Description

0160 Data communication regarding the vehicle CAN is disturbed.

1203 The terminal 30b has an interruption.

You might also like