30W 1"x1" Package DC-DC Regulated Converter SKMW30 & DKMW30 series

■ Features ■ Applications

DIP 1"x1" package with industry standard pinout Telecom/ datacom system

4:1 ultrawide input range Wireless network

Operating temperature range -40 ~ +85℃ Industrial control facility

No minimum load required Instrument

Comply to BS EN/EN55032 radiated Class A without Analyzer
additional components Detector

High efficiency up to 90%
Data switch

Protections: Short circuit (Continuous) / Overload /
Over voltage / Over temperature / Input under voltage

1.5KVDC I/O isolation

Remote ON/OFF control and Triming output (±10%)

3 years warranty

■ Description
SKMW30 and DKMW30 series are 30W isolated and regulated module type DC-DC converter with DIP 1"x1"
package. It features international standard pins, a high efficiency up to 90%, wide working temperature
range -40~+85℃, 1.5KVDC I/P-O/P isolation voltage, compliance to BS EN/EN55032 radiated Class A
without additional components, continuous-mode short circuit, overload, over temperature, input under
voltage protection, remote ON/OFF and trimmable output voltage etc. The models account for different
input voltage 9~36V and 18~75V 4:1 ultrawide input range, and various output voltage, 3.3V/5V/12V/15V
for single output and ±12V/±15V for dual outputs, which are suitable for all kinds of systems, s uch
as industrial control, telecommunication field, distributed power architecture, and so on.

■ Model Encoding
S KMW30 F - 12

Output voltage (3.3/5/12/15Vdc， ±12/±15Vdc)

Input voltage (F: 9~36Vdc，G: 18~75Vdc)
Rated wattage

Series name { S:Single output

D:Dual output
File Name:SKMW30,DKMW30-SPEC 2021-06-22
 30W 1"x1" Package DC-DC Regulated Converter SKMW30 & DKMW30 series
MODEL SELECTION TABLE
INPUT OUTPUT

ORDER NO. INPUT CURRENT EFFICIENCY CAPACITOR LOAD

INPUT VOLTAGE OUTPUT OUTPUT (TYP.) (MAX.)
(RANGE) VOLTAGE CURRENT
NO LOAD FULL LOAD

SKMW30F-03 10mA 1172mA 3.3V 0~7500mA 88% 7500μF

SKMW30F-05 10mA 1400mA 5V 0~6000mA 90% 6000μF

SKMW30F-12
24V 10mA 1404mA 12V 0~2500mA 89% 2500μF
(9 ~ 36V)

SKMW30F-15 10mA 1404mA 15V 0~2000mA 89% 2000μF

DKMW30F-12 10mA 1425mA ±12V ±0 ~ 1250mA 87% *1250μF

DKMW30F-15 10mA 1425mA ±15V ±0 ~1000mA 88% *1000μF

SKMW30G-03 8mA 590mA 3.3V 0~7500mA 88% 7500μF

SKMW30G-05 8mA 700mA 5V 0~6000mA 90% 6000μF

SKMW30G-12 8mA 700mA 12V 0~2500mA 89% 2500μF

48V
SKMW30G-15 (18 ~ 75V) 8mA 702mA 15V 0~2000mA 89% 2000μF

DKMW30G-12 8mA 710mA ±12V ±0 ~ 1250mA 88% *1250μF

DKMW30G-15 8mA 702mA ±15V ±0 ~1000mA 89% *1000μF

* For each output

File Name:SKMW30,DKMW30-SPEC 2021-06-22

 30W 1"x1" Package DC-DC Regulated Converter SKMW30 & DKMW30 series
SPECIFICATION
VOLTAGE RANGE F: 9~36Vdc , G: 18~75Vdc
SURGE VOLTAGE (100ms max.) 24Vin models : 50Vdc, 48Vin models : 100Vdc
INPUT FILTER Pi type
PROTECTION Fuse recommended. 24Vin models: 6A delay time Type, 48Vin models: 3A delay time Type
INTERNAL POWER DISSIPATION 500mW
VOLTAGE ACCURACY ±1.5%
RATED POWER 30W
RIPPLE & NOISE Note.2 3.3/5Vout models: 75mVp-p, other models:100mVp-p
OUTPUT LINE REGULATION Note.3 ±0.2%
LOAD REGULATION Note.4 Single output models: ±0.2%, Dual output models:±1%
SWITCHING FREQUENCY (Typ.) 3.3/5Vout models: 270KHz, other models: 330KHz
EXTERNAL TRIM ADJ. RANGE (Typ.) ±10% (Single output model only)
SHORT CIRCUIT Protection type : Continuous, automatic recovery
110 ~ 170% rated output power
OVERLOAD
Protection type : Recovers automatically after fault condition is removed
PROTECTION OVER VOLTAGE Protection type : Clamp by diode
OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down
Start-up voltage 24Vin (F-type): 8.8Vdc, 48Vin (G-type): 17Vdc
UNDER VOLTAGE LOCKOUT
Shutdown voltage 24Vin (F-type): 8Vdc, 48Vin (G-type): 16Vdc
FUNCTION REMOTE CONTROL Power ON: R.C. ~ -Vin >3.5~75Vdc or open circuit ; Power OFF: R.C. ~ -Vin <1.2Vdc or short
COOLING Free-air convection
WORKING TEMP. -40 ~ +85℃ (Refer to "Derating Curve")
CASE TEMPERATURE +105℃ max.
WORKING HUMIDITY 20% ~ 90% RH non-condensing
ENVIRONMENT
STORAGE TEMP., HUMIDITY -55 ~ +1 25℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT 0.03% / ℃ (0 ~ 60℃)
SOLDERING TEMPERATURE 1.5mm from case of 1 ~ 3sec./260℃ max.
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS EAC TP TC 004 approved
WITHSTAND VOLTAGE I/P-O/P:1.5KVDC
ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION CAPACITANCE (Typ.) 1500pF
Parameter Standard Test Level / Note
EMC EMISSION Conducted BS EN/EN55032(CISPR32) N/A
SAFETY & Radiated BS EN/EN55032(CISPR32) Class A
EMC Parameter Standard Test Level / Note
( Note.5)
ESD BS EN/EN61000-4-2 Level 2, ±8KV air, ±4KV contact
Radiated Susceptibility BS EN/EN61000-4-3 Level 2, 3V/m
EMC IMMUNITY EFT/Burest BS EN/EN61000-4-4 Level 1, 0.5KV
Surge BS EN/EN61000-4-5 Level 1, 0.5KV Line-Line
Conducted BS EN/EN61000-4-6 Level 2, 3V(e.m.f.)
Magnetic Field BS EN/EN61000-4-8 Level 2, 3A/m
MTBF 3.3/5Vout models: 860Khrs, Other models: 1170Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H) 25.4*25.4*10.2mm (1*1*0.4 inch)
OTHERS
CASE MATERIAL Black coated copper with non-conductive base
PACKING 18g
NOTE 1.All parameters are specified at normal input(F:24Vdc, G:48Vdc), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 0% to 100% rated load.
5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please
refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)
※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx
File Name:SKMW30,DKMW30-SPEC 2021-06-22
 30W 1"x1" Package DC-DC Regulated Converter SKMW30 & DKMW30 series
External Output Trimming
In order to trim the voltage up or down one needs to connect the trim resistor either between the trim pin and -Vo for trim-up and between trim pin and
+Vo for trim-down. The output voltage trim range is ±10%. This is shown in Figures 1 and 2:

+Vin +Vo +Vin +Vo

Trim R-Load R trim-down

R-Load
R trim-up Trim
-Vin -Vo -Vin -Vo

Figure 1. Trim-up Voltage Setup Figure 2. Trim-down Voltage Setup

1. The value of Rtrim - up defined as: Table 1 – Trim up and Trim down Resistor Values
Output R1 R2 R3 Rt Vr
V r × R1 × (R2 + R3) Model Number
R trim − up = ( ) − Rt (K Ω) Voltage(V) (KΩ) ( KΩ) ( KΩ) (KΩ) (V)
( V o − V o , nom ) × R2
SKMW30F - 0 3
Where 3.3 2.74 1.8 0.27 9.1 1.24
SKMW30G - 0 3
R trim -up is the external resistor in Kohm. SKMW30F - 05
5.0 2.32 2.32 0 8.2 2.5
V o , nom is the nominal output voltage. SKMW30G - 05
V o is the desired output v oltage. SKMW30F - 12
12.0 6.8 2.4 2.32 22 2.5
R1, Rt, R2, R3 and Vr are internal to the unit and are defined in Table 1. SKMW30G - 12
SKMW30F - 15
15.0 8.06 2.4 3.9 27 2.5
SKMW30G - 15

For example, to trim-up the output voltage of 5.0V module (SKMW30F-05) by 10% to 5.5V, R trim-up is calculated as follows:
V o – V o,nom = 5.5 – 5.0 = 0.5V
R1 = 2.32 KΩ
R2 = 2.32 KΩ
R3 = 0 KΩ
Rt = 8.2 KΩ
Vr = 2.5V

2.5 × 2.32 × (2 . 32+0)

R trim − up = ( ) − 8.2 = 3.4(K Ω)
0.5 × 2.32

2 . The value of Rtrim - down defined as:

V r × R1
R trim − down = R1 × ( − 1 ) − Rt (K Ω)
( V o , nom − V o ) × R2
Where
R trim-down is the external resistor in Kohm.
V o , nom is the nominal output voltage.
V o is the desired output voltage.
R1, Rt, R2, R3 and Vr are internal to the unit and are defined in Table 1.
For example, to trim-down the output voltage of 5.0V module (SKMW30F-05) by 10% to 4.5V, R trim-down is calculated as follows:
V o,nom – V o = 5.0 – 4.5 = 0.5V
R1 = 2.32 KΩ
R2 = 2.32 KΩ
R3 = 0 KΩ
Rt = 8.2 KΩ
Vr = 2.5V

2.5 × 2.32
R trim − down = 2.32 × ( − 1 ) − 8.2 = 1.08 (K Ω)
0.5 × 2.32

File Name:SKMW30,DKMW30-SPEC 2021-06-22

 30W 1"x1" Package DC-DC Regulated Converter SKMW30 & DKMW30 series
Mechanical Specification

All dimensions in mm(inch)

Tolerance:x.x±1mm( x.xx±0.25")

Pin size is 1±0.1mm ( 0 . 04 "±0.004")

5.08(0.2)
2.5(0.1)

7.62(0.3) 10.2(0.4)

6 2 1
20.32(0.8)
25.4(1)

Bottom View Side View

1(0.04)
5 4 3

10.16(0.4) 10.16(0.4)

25.4(1) 5.6(0.22 ) min. 10.2(0.4)

Plug Assignment Derating Curve

Pin-Out
SKMW30 DKMW30 100
Pin No. (Single output) (Dual output)
LOAD (%)

80
1 +Vin +Vin
60
2 -Vin -Vin
40
3 +Vout +Vout Natural convection
20
4 Trim Common
-40 -20 0 20 40 55 70 85 105
5 -Vout -Vout

6 R.C. R.C. Ta (℃)

Installation Manual
Please refer to : http://www.meanwell.com/manual.html

File Name:SKMW30,DKMW30-SPEC 2021-06-22