www.tsurumi-global.

com
 “Pursuing close communication
between people and water”
Tsurumi Manufacturing Company, Limited was founded in Osaka, Japan in 1924. Since the
foundation, Tsurumi has consistently devoted its efforts to the creation and development of
advanced water utilization technologies. Tsurumi has also innovated the pump manufacturing
technologies in a constant pursuit of new opportunities and new fields that contribute to the
advancement of our society and environment. This effort epitomizes its management policy
“Dedicated to pursuing close communication between people and water through innovative
creation and respect for harmony with nature.”

launched by TSURUMI PUMP

is a Tsurumi-original keyword created from the combination
of amenity and -ics which is a postfix used in academics and technology.
This message expresses our pursuit of technology that is friendly to people and the Earth.

Submersible Agitator Pump GPN

The GPN-series is a submersible high power, heavy-duty slurry pump incorporating an
agitator to suspend solids enabling the pump to handle high concentration slurries. Being
equipped with high-chromium cast iron wear parts, the pump delivers outstanding
durability. The suction plate is adjustable enabling the pump to maintain the original
performance.* The GPN utilizes a cooling water jacket to allow the pump to operate at low
water levels for extended period of time without the fear of overheating.
*Available in GPN422/622 only
Applications
• Transferring and draining bentonite slurry in piling works.
• Draining cement slurry or sand-carrying water in foundation works.
• Draining aggregate and ore wash water in mines and quarries.
• Collecting sediments in grit chambers at wastewater treatment plants.
• Pumping scale at steel mills.
A production base boasting industry-leading scale and advanced facilities
Kyoto Plant
• Manufactures compact, super-sized, and special-purpose pumps.
• Designed for flexible operation. Follows a high-mix, low-volume approach to production.
All processes are centrally computer-controlled.
• Features a vast tank with a maximum water depth of 11.7 meters and a maximum volume of
4,500 cubic meters of retained water. Includes an experimental tower rising 44 meters above ground.
Lot area: 46,000 square meters Total floor area: 30,000 square meters FS57208 / ISO9001
Spiral Design with Water Jacket
S.S. 1500 / 1800min-1
The side discharge, spiral design allows smoother passage 20
of the sucked solid matters. The motor is cooled by a water 50Hz GPN35.5
jacket assuring efficient motor cooling even when the pump 60Hz
operates with its motor exposed to air.
Motor Output 5.5 kW [Three-phase]

TOTAL HEAD (m)

Nominal Dia.
Dis. Bore 80 mm 80

10 Dis. Connection Hose Coupling

Weight [excl. Cable] 145 kg

796
1 Cable Length 8m
4 Motor Protector Circle Thermal Protector
C.W.L.

449
Starting Method Direct on Line
2

270
0
0 0.5 1 1.5 2
CAPACITY (m3/min)
487

S.S. 1500 / 1800min-1

24
50Hz GPN411
20 60Hz
Motor Output 11 kW [Three-phase]

TOTAL HEAD (m)

Nominal Dia.
Dis. Bore 100 mm 100

Dis. Connection Hose Coupling

879
10 Weight [excl. Cable] 217 kg
Cable Length 8m C.W.L.

5 Motor Protector Circle Thermal Protector

500
3 Starting Method Direct on Line

295
0
0 1 2 3 4
CAPACITY (m3/min) 617

S.S. 1500 / 1800min-1

28
50Hz GPN415
60Hz
20
15 kW [Three-phase]
7 Motor Output

TOTAL HEAD (m)

Nominal Dia.
Dis. Bore 100 mm 100

Dis. Connection Hose Coupling

879
Weight [excl. Cable] 220 kg
10
Cable Length 10 m C.W.L.
1 Air Release Valve Motor Protector Circle Thermal Protector

500
Fitted on the water jacket, it prevents the Air-lock. When air goes through the valve, the ball stays at the bottom, but when the Starting Method Direct on Line

295
pumped water starts to flow, it closes the outlet by its buoyancy.
0
0 1 2 3 4 5
2 Circle Thermal Protector
CAPACITY (m3/min)
Detects both excess heat and excess amperage draw. It therefore protects against, overheating, overcurrent and dry-running. 617

*GPN422/622 have built-in miniature thermal protectors working with a dedicated circuit in the control panel.

3 Internal Mechanical Seal with Silicon Carbide Faces

Runs in the oil chamber, a clean, non-corrosive and abrasion free lubricating environment. It eliminates the problems like 36
S.S. 1500 / 1800min-1
spring failure and ensures the longest operational life of any seal available. G
50Hz
GP PN
GPN422 · 622
*GPN422/622 have the Oil Lifter forcibly lubricating and cooling the mechanical seal.
42
30
N4
22
GP
2 60Hz
N6
22
4 Anti-wicking Cable Entry
Motor Output 22 kW [Three-phase]
Prevents water incursion due to capillary wicking should the power cable be damaged or the end submerged.
TOTAL HEAD (m)

G
PN
20
62
2
Dis. Bore 100 · 150 mm Nominal Dia.
5 Chromium Molybdenum Motor Shaft Dis. Connection Hose Coupling 100 · 150

1102
Made of SCM435 (JIS), chromium molybdenum steel (tensile strength 930 N/mm2 and over). It has the superior performance Weight [excl. Cable] 415 kg
against a shock given at the instant of sucking hard foreign matters. Cable Length 10 m
10
6 High-chromium Cast Iron Impeller & Suction Plate Shaft Seal Double Mechanical Seal

488 · 528
C.W.L.

Made of high-chromium cast iron ensuring highest durability. Even if the performance drops due to wearing outof the impeller with Oil Lifter
and/or suction plate, it can be improved by simply replacing the suction plate. Motor Protector Miniature Thermal Protector

300
0
*GPN422/622 have an adjustable suction plate. 0 1 2 3
CAPACITY (m3/min)
4 5 6 Leakage Sensor Electrode Type
Starting Method Direct on Line
7 Agitating Mechanism 725
Consists of a shaft-mounted agitator and a dedicated strainer. The agitator made of high-chromium cast iron resists wear
caused by abrasive particles, and it suspends solids to assist in pumping sediments in combination with the strainer.
 www.tsurumi-global.com

We reserve the right to change the specifications and designs for improvement without prior notice.

Your Dealer

Printed in Japan CAT. IB108-B HB-E-D-T