E-Catalogue Bicc - 150 Kv-r04

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

N2XCK2Y / NA2XCK2Y 1x (300-2500) mm² 87/150 kV

Cu or Al /XLPE/CTS or CWS/LS/HDPE)

Copper/Alumunium Conductors, XLPE Insulated, Copper Tape Screen or copper wire + copper tape open helix,
Lead sheathed, HDPE Outer sheathed with graphite coating

Standard Specification : IEC 60840 or Customer request

Special features on request : Oil resistant, UV resistant, Flame retardant, Anti termite, Low Smoke Zero Halogen

DIMENTION AND ELECTRICAL DATA


Nominal cross section area mm²
300 400 500 630 800 1000 1200 1600 2000 2500

Conductor diameter (approx) mm


20.3 23.4 26.1 30.7 34.5 39.56 44 52 56 66
Nominal insulation thickness mm 17 - 20
Insulation diameter (approx.) mm
58.72 66.56 69.26 73.86 77.66 83.4 87.84 95.84 99.84 109.84
Nominal lead sheath thickness mm
2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5
Nominal sheath thickness mm
4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5
Overall cable diameter (approx.) mm
85 92.3 94.9 95.5 102.2 105 110.3 115.3 120.3 130.3
Cable net. Weight (approx.)
Cu 16,184 17,184 18,658 20,843 22,088 25,810 28,015 30,662 36,698 42,491
kg/km
Al 11,841 15,841 16,641 17,905 19,082 21,289 22,567 25,060 26,830 30,252
Max, DC conductor resistance at 20°C
Cu 0.0601 0.0470 0.0366 0.0283 0.0221 0.0176 0.0151 0.0113 0.0090 0.0072
Ohm/km
Al 0.1000 0.0778 0.0605 0.0490 0.0367 0.0291 0.0247 0.0186 0.0149 0.0127
Capacitance per-phase uF/km 0.14 0.16 0.17 0.19 0.21 0.22 0.24 0.27 0.29 0.32
Max. short circuit current of conductor
Cu 43 57.83 72.21 90.89 115.31 144.03 172.9 230.3 287.7 359.5
kA/sec
Al 27.6 38.34 47.85 60.21 76.4 95.3 114.3 152.5 190.4 256.1
Max. current carrying capacity at 20°C In Ground
Cu 480 650 738 841 941 1037 1104 1275 1528 1644
single phase A
Al 360 511 584 667 756 851 920 1148 1275 1365
AC test voltage kV/30 min. 218

You might also like