Vertical Multistage Pumps

APPLICATIONS
Pumping of clean, non-aggressive liquids, free of
fibres in suspension, suitable for applications such as:-
>> Water supply - domestic, rural & industrial WHY CHOOSE THE
>> Pressure boosting
VM SERIES MULTISTAGE PUMPS?
>> Agriculture & farming
Vertical multistage centrifugal pump with in line suction and
>> Turf water & irrigation
discharge
>> Commercial – high pressure washing & water • Minimum floor space required and easy to install
treatment All hydraulic parts constructed in stainless steel
>> Boiler feed • Long service life
• Corrosion and abrasion resistance
High efficiency stainless steel impeller design
• Low operating costs
• Less stages required
• Low maintenance
Raised bottom bearing
• Longer bearing life through reduced risk of damage from
sediment
Hard faced mechanical seal
• Longer seal life
Teflon neck rings
• Maintains high efficiency
• Reduces vibration and noise
• Reduces sensitivity to thermal expansion
Tungsten carbide intermediate bearing/s
(selected models)
• Reduces possible damage from shaft misalignment or
VM Series vibration
Stainless steel threaded companion flanges with gaskets, nuts,
Vertical Multistage Pumps bolts & washers included with every pump
Model Numbers: • Easier installation
VM1, VM3, VM5, VM10, VM16, VM20, • Guaranteed material quality
VM32, VM42, VM65, VM90
Vertical in-line multistage centrifugal pump with
stainless steel hydraulic parts.
Vertical Multistage Pumps
OPERATING LIMITS MATERIALS OF CONSTRUCTION
Capacities to 1833 lpm (110m3/hr) PART MATERIAL
Pressure heads to 230m Pump attachment base Cast iron
Maximum discharge pressure PN25 255m Suction & discharge casing 304 stainless steel
Maximum suction pressure Refer to table below Motor support lantern Cast iron
Temperature range -15° to +70°C Impellers 304 stainless steel
Hot water type available on request +70° to +120°C Stages (casing) 304 stainless steel
Motor - three phase* 400V ± 10% Outside sleeve 304 stainless steel
up to 2.2kW 230V ± 10% Pump shaft 316L stainless steel
Motor - single phase*
3.0 to 4.0kW 240/480V ± 10% Intermediate bearing Tungsten carbide
Single phase up to 1.5kw 240V motor supplied with Aust. standard plug Mechanical seal Silicon carbide/carbon/EPDM
Rotation Anti-clockwise (top view) O-rings (casing) EPDM
*Other voltages on request Plugs (drainage & priming) 316L stainless steel
Impeller neck rings Teflon
*Special version with 316L stainless steel & viton o-rings on request

ELECTRICAL DATA NOTE: 304 stainless steel, (Z6 CN 18.9) and 316L
stainless steel (Z2 CND 17.12) are recommended materials
Maximum ambient temperature
Single phase 45°C
that are highly resistant to corrosion. Suitable for pumping
Three Phase 40°C clean, clear non-viscous liquids, containing no fibres or
Minimum IP rating IP55 solids. Maximum sand/silica concentration 40 g/m3.
Insulation class Class F

IDENTIFICATION OF THE PUMP

MAXIMUM WORKING PRESSURE
VM 32 - 2A/3
Model Curve Number
VM1, 3 & 5 ranges 2 Motor fitted
VM10 & 16 ranges 3 Blank = Single phase
VM32-2A to VM32-6 1 /3 = Three phase
VM32-8 to VM32-12 4 /L = Liquid end
VM65-2A to VM65-5A 1
Impeller variation
VM65-6B 4
(A = turndown)
VM90-2 to VM90-4 1
VM90-5 to VM90-6 4

Number of stages

The following figure shows the limitation of pressure and Nominal capacity at BEP in m3/hr
temperature, which shall be kept within the region as
shown in the figure. VM Series Vertical Multistage
Stainless Steel Pump
P(bar)
28
24 4
3
20 2
ALTITUDE & TEMPERATURE VS LOSS OF HEAD
16 1 Guide only – altitude and temperature losses are added.
12 Altitude Loss of head Temperature Loss of head
8 0m 0m 20°C 0.20m
4 500m 0.60m 30°C 0.40m
0 1000m 1.15m 40°C 0.70m

-40 0 40 80 120 T(oC) 1500m 1.70m 50°C 1.20m

2000m 2.20m 60°C 1.90m
2500m 2.65m 70°C 3.10m
3000m 3.20m 80°C 4.70m
90°C 7.10m
100°C 10.30m
Vertical Multistage Pumps
VM1 HYDRAULIC PERFORMANCE

P(MPa)
1.8 TOTAL HEAD (m)

1.6 VM1
160 50Hz
VM1-25

1.4 VM1-23
140
VM1-21
1.2 120

1.0 VM1-17
100
VM1-15

0.8 80
VM1-11

0.6 60

0.4 40

0.2 20

0.0 0
Q(m3/hr) 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2

Q(l/s) 0.0 0.1 0.2 0.3 0.4 0.5 0.6

P2(kW) Eta (%)

per stage
Eta
0.08 40
0.06 30
P2
0.04 20
0.02 10
0.00 0
Q(m /hr) 0.0
3
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2

H(m) NPSH(m)

6.0 QH2900rpm 4
4.5 3
3.0 2
NPSH
1.5 1
0.0 0
Q(m3/hr) 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2

NOTE: Curve tolerance in confomity with ISO9906 Appendix A.

Vertical Multistage Pumps
VM3 HYDRAULIC PERFORMANCE

P(MPa) TOTAL HEAD (m)

260

2.4
240
VM3
50Hz
2.2
220

2.0
200

1.8 VM3-29
180

1.6 160
VM3-23
1.4 140

1.2 VM3-19
120
VM3-17
1.0 100 VM3-15

0.8 80 VM3-12

0.6 60
VM3-8

0.4 40

0.2 20

0.0 0
Q(m3/hr) 0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4

Q(l/s) 0.0 0.2 0.4 0.6 0.8 1.0 1.2

P2(kW) Eta (%)

per stage P2
0.08 60
0.06 Eta
45
0.04 30
0.02 15
0.00 0
Q(m3/hr) 0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4

H(m) NPSH(m)

6.0 QH2900rpm 4
4.5 3
3.0 2
NPSH
1.5 1
0.0 0
Q(m3/hr) 0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4

NOTE: Curve tolerance in confomity with ISO9906 Appendix A.

Vertical Multistage Pumps
VM5 HYDRAULIC PERFORMANCE

P(MPa) TOTAL HEAD (m)

240

2.2
230
VM5-22 VM5
220 50Hz
210
2.0 200 VM5-19
190
1.8 180
170
1.6 VM5-16
160
150
1.4 VM5-14
140
130
VM5-12
1.2 120
110
VM5-10
1.0 100
90
0.8 80 VM5-8
VM5-7
70
0.6 60
VM5-5
50
0.4 40
30
0.2 20
10
0.0 0
Q(m /hr) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5
3

Q(l/s) 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2

P2(kW) Eta (%)

per stage
0.30 60
0.25 Eta 50
0.20 P2 40
0.15 30
0.10 20
0.05 10
0.00 0
Q(m3/hr) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5

H(m) NPSH(m)
QH2900rpm

8 2

4 NPSH
1

0 0
Q(m3/hr) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5

NOTE: Curve tolerance in confomity with ISO9906 Appendix A.

Vertical Multistage Pumps
VM10 HYDRAULIC PERFORMANCE

TOTAL HEAD (m)

240
VM10-20 VM10
220 50Hz

200 VM10-18

180 VM10-16
160 VM10-14
140
VM10-12
120 VM10-10
100 VM10-9
VM10-8
80 VM10-7
VM10-6
60 VM10-5
VM10-4
40
20
0
Q(m /hr) 0
3
1 2 3 4 5 6 7 8 9 10 11 12 13
Q(l/s) 0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6

P2(kW) Eta (%)

per stage
0.6 Eta 60
0.4 P2 40
0.2 20
0.0 0
Q(m3/hr) 0 1 2 3 4 5 6 7 8 9 10 11 12 13

H(m) NPSH(m)

10 2
QH2900rpm
5 1
NPSH
0 0
Q(m /hr) 0
3
1 2 3 4 5 6 7 8 9 10 11 12 13

NOTE: Curve tolerance in confomity with ISO9906 Appendix A.

Vertical Multistage Pumps
VM16 HYDRAULIC PERFORMANCE

P(MPa) TOTAL HEAD (m)

260
VM16
250
2.4 240
50Hz
230
2.2 220
210
VM16-14
2.0 200
190
1.8 180 VM16-12
170
1.6 160
150
1.4 140
130
1.2 120 VM16-8
110
1.0 100
90 VM16-6
0.8 80
VM16-5
70
0.6 60 VM16-4
50
VM16-3
0.4 40
30 VM16-2
0.2 20
10
0.0 0
Q(m3/hr) 0 2 4 6 8 10 12 14 16 18 20 22 24

Q(l/s) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5

P2(kW) Eta (%)

per stage
1.6 80
1.2 Eta 60
0.8 P2 40
0.4 20
0.0 0
Q(m /hr) 0
3
2 4 6 8 10 12 14 16 18 20 22 24

H(m) NPSH(m)
16 8
12 QH2900rpm
6
8 4
4 2
NPSH
0 0
Q(m3/hr) 0 2 4 6 8 10 12 14 16 18 20 22 24

NOTE: Curve tolerance in confomity with ISO9906 Appendix A.

Vertical Multistage Pumps
VM20 HYDRAULIC PERFORMANCE

TOTAL HEAD (m)

240 VM20
VM20-17 50Hz
220
VM20-14
200
180 VM20-12
160
VM20-10
140
120 VM20-8

100 VM20-7
VM20-6
80 VM20-5
60 VM20-4
VM20-3
40
VM20-2
20 VM20-1

0
Q(m3/hr) 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30
Q(l/s) 0 1 2 3 4 5 6 7 8

P2(kW) Eta (%)

per stage
1.6 Eta 80
1.2 60
0.8 P2 40
0.4 20
0.0 0
Q(m3/hr) 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32

H(m) NPSH(m)
16 8
12 QH2900rpm 6
8 4
4 NPSH 2
0 0
Q(m3/hr) 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32

NOTE: Curve tolerance in confomity with ISO9906 Appendix A.

Vertical Multistage Pumps
VM32 HYDRAULIC PERFORMANCE

P(MPa) TOTAL HEAD (m)

300

280 VM32
50Hz
2.6
260
2.4
240 VM32-12
2.2
220
2.0
200 VM32-10

1.8
180
1.6
160 VM32-8

1.4 140
1.2 120 VM32-6

1.0 100 VM32-5

0.8 80 VM32-4

0.6 60 VM32-3

0.4 40
VM32-2A

0.2 20

0.0 0
Q(m3/hr) 0 4 8 12 16 20 24 28 32 36 40 44

Q(l/s) 0 2 4 6 8 10 12

P2(kW) Eta (%)

per stage
80
Eta
1.8 P2 60
P2A
1.2 40
0.6 20
0.0 0
Q(m3/hr) 0 4 8 12 16 20 24 28 32 36 40 44

H(m) NPSH(m)
20 QH2900rpm 10
16 QH2900rpm A NPSH 8
12 6
8 4
4 2
0 0
Q(m3/hr) 0 4 8 12 16 20 24 28 32 36 40 44

NOTE: Curve tolerance in confomity with ISO9906 Appendix A.

Vertical Multistage Pumps
VM42 HYDRAULIC PERFORMANCE

TOTAL HEAD (m)

320
VM42-12 VM42
300 50Hz
280 VM42-11
260 VM42-10
240 VM42-9
220
VM42-8
200
VM42-7
180
160 VM42-6
140 VM42-5
120 VM42-4
100
VM42-3
80
60 VM42-2
40 VM42-1
20
0
Q(m3/hr) 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70
Q(l/s) 0 2.5 5.0 7.5 10.0 12.5 15.0 20.0

P2(kW) Eta (%)

per stage
4.0 Eta 80
3.0 P2 1/1 60
2.0 P2 2/3 40
1.0 20
0.0 0
Q(m /hr) 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70
3

H(m) NPSH(m)
30 QH2900rpm 1/1 10
24 8
18 QH2900rpm 2/3 6
12 4
6 NPSH 2
0 0
Q(m3/hr) 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70

NOTE: Curve tolerance in confomity with ISO9906 Appendix A.

Vertical Multistage Pumps
VM65 HYDRAULIC PERFORMANCE

P(MPa) TOTAL HEAD (m)

260

2.2
VM65
240 50Hz

220

2.0 200

180

1.6 160 VM65-6B

140 VM65-5A

1.2 120 VM65-4

100 VM65-4B

VM65-3A
0.8 80

VM65-2
60

VM65-2A
0.4 40

20

0.0 0
Q(m3/hr) 0 10 20 30 40 50 60 70 80 90
Q(l/s)
0 5 10 15 20 25

P2(kW) Eta (%)

per stage
8 Eta 80
6 P2 60
4 P2A 40
2 20
0 0
Q(m3/hr) 0 10 20 30 40 50 60 70 80 90

H(m) NPSH(m)

32 QH2900rpm 8
24 QH2900rpm A 6
NPSH
16 4
8 2
0 0
Q(m3/hr) 0 10 20 30 40 50 60 70 80 90

NOTE: Curve tolerance in confomity with ISO9906 Appendix A.

Vertical Multistage Pumps
VM90 HYDRAULIC PERFORMANCE

P(MPa) TOTAL HEAD (m)

220

2.0
210 VM90
200 VM90-6 50Hz
190
1.8 180
170
VM90-5
1.6 160
150
1.4 140
VM90-4
130
1.2 120
VM90-4A
110
1.0 100 VM90-3

90
0.8 80 VM90-3A
70
0.6 60
50
0.4 40
30
0.2 20
10
0.0 0
Q(m3/hr) 0 10 20 30 40 50 60 70 80 90 100 110 120 130
Q(l/s)
0 5 10 15 20 25 30 35

P2(kW) Eta (%)

per stage
Eta
8 80
P2
6 60
P2A
4 40
2 20
0 0
Q(m3/hr) 0 10 20 30 40 50 60 70 80 90 100 110 120 130

H(m) NPSH(m)
40 8
QH2900rpm
30 6
QH2900rpm A NPSH
20 4
10 2

0 0
Q(m3/hr) 0 10 20 30 40 50 60 70 80 90 100 110 120 130

NOTE: Curve tolerance in confomity with ISO9906 Appendix A.

Vertical Multistage Pumps
VM1 / VM3 / VM5 – PN25

D2
D1 VM1 / VM3
PN25 / DN25
4 X O14

B2 O65 O85 O115

32
O32
4 X O13
180
G1/2 210

VM5
B1 PN25 / DN32 4 X O18
G1/2

O60 O100 O140

75
32
100 O32
4 X O13 4 X O13
150 180
250 210

VM10 – PN25

D2
D1

B2

BSP 1½"

G1/2
Pipe thread
G1/2 VM3_VM5 Dimensions
B1
PN25 / DN40
4 X O18

80 50 O110 O145
80

130 4 X O14 4 X O14

199 215
280 247
Vertical Multistage Pumps
VM16 – PN25

D2
D1

B2

BSP 2"

G1/2
Pipe thread
G1/2
B1
PN25 / DN50
4 X O18

O160
O125
95 50
90

130 4 X O14 4 X O14

199 215
300 247

VM20

VM16 Dimensions
Vertical Multistage Pumps
VM32

D2
D1

B2

G1/2

PN25-40 / DN65
B1 G1/2

8 X O18

G1/2

O185
O145
O107
105 30

170 O74
225 240
4 X O14 4 X O14
320 298

VM42

D2
D1

VM32 Dimensions

B2

G1/2

PN16-25 / DN80
B1 G1/2

8 X O18

G1/2
O200
O160
O120

140 45

190 O80
245 266
4 X O14 4 X O14
365 330
 Vertical Multistage Pumps
VM65 – PN16 VM90 – PN16

D2 D2
D1 D1

B2 B2

D2 D2
G1/2 G1/2
D1

PN16 / DN100 PN16 /

B1 G /2
1
B1 G /2 1

8 X O18

G1/2 G1/2
B2
O220
O180
O150

140 45 140 45

190 199
O100 O1
245 255 4 X O14
4 X O14 266 4 X O14 28
365 380
330 34

G /2 – PN16
1
VM65 VM90 – PN16

PN16 / DN100 PN16 / DN100

G /2
1
B1 G /21

VM65 Dimensions 8 X O18

VM90 Dim
8 X O18

G1/2 G1/2
O220
O180
O150
O220
O180
O150

45 140 45

199
O100 O100
255 4 X O14 4 X O14
4 X O14 266 4 X O14 280
380
330 348
Vertical Multistage Pumps
DIMENSIONS
Motor (P2) Dimensions (mm) & weights (kg)
Weight (kg)
Model (kW / HP) B1 B2 B1 + B2 D1 D2
VM1 SERIES

VM1-11 0.55 420 210 630 148 117 22

VM1-15 0.75 502 245 747 170 142 25

VM1-17 1.1 538 245 783 170 142 28

VM1-21 1.5 610 245 855 170 142 30

VM1-23 1.5 646 245 891 170 142 33

VM1-25 1.5 692 290 982 170 155 40

VM3 SERIES

VM3-8 0.75 333 245 578 170 142 22

VM3-12 1.1 405 245 650 170 142 25

VM3-15 1.5 459 290 749 190 155 25

VM3-17 1.5 512 290 802 190 155 30

VM3-19 2.2 548 290 838 190 155 35

VM3-23 2.2 620 290 910 190 155 40

VM3-29 3.0 728 315 1043 197 165 40

VM5 SERIES

VM5-5 1.1 324 245 569 170 142 25

VM5-7 1.5 395 290 685 190 155 30

VM5-8 1.5 422 290 712 190 155 30

VM5-10 2.2 476 290 766 190 155 30

VM5-12 3.0 530 315 845 197 165 35

VM5-14 3.0 592 315 907 197 165 35

VM5-16 3.0 646 315 961 197 165 40

VM5-19 4.0 727 335 1062 230 188 45

VM5-22 5.5 808 430 1238 260 208 50

VM10 SERIES

VM10-4 1.5 420 290 710 190 155 30

VM10-5 2.2 450 290 740 190 155 40

VM10-6 2.2 480 290 770 190 155 40

VM10-7 3.0 510 315 825 197 165 45

VM10-8 3.0 550 315 865 197 165 45

VM10-9 4.0 580 315 895 197 165 50

VM10-10 4.0 610 335 945 230 188 55

VM10-12 5.5 670 430 1100 260 208 57

VM10-14 5.5 750 430 1180 260 208 80

VM10-16 7.5 810 430 1240 260 208 85

VM10-18 7.5 870 430 1300 260 208 90

VM16 SERIES

VM16-2 2.2 400 290 690 190 155 40

VM16-3 3.0 455 315 770 197 165 50

VM16-4 4.0 500 335 835 230 188 55

VM16-5 5.5 565 430 995 260 208 70

VM16-6 5.5 610 430 1040 260 208 75

VM16-8 7.5 700 430 1130 260 208 80

VM16-11 11.0 865 490 1355 330 255 142

VM16-14 15.0 1000 490 1490 330 255 160

Vertical Multistage Pumps
DIMENSIONS (Continued from previous page)
Motor (P2) Dimensions (mm) & weights (kg)
Weight (kg)
Model (kW) B1 B2 B1 + B2 D1 D2
VM20 SERIES
VM20-1 1.1 387 245 632 170 142 32
VM20-2 2.2 397 290 687 190 155 43
VM20-3 4 452 335 787 230 188 57
VM20-4 5.5 517 430 947 260 208 72
VM20-5 5.5 562 430 992 260 208 74
VM20-6 7.5 607 430 1037 260 208 82
VM20-7 7.5 652 430 1082 260 208 84
VM20-8 11 785 490 1275 330 255 140
VM20-10 11 875 490 1365 330 255 145
VM20-12 15 965 490 1455 330 255 160
VM20-14 15 1055 490 1545 330 255 165
VM20-17 18.5 1190 550 1740 330 255 190
VM32 SERIES
VM32-2A 3.0 455 315 770 197 165 75
VM32-3 5.5 645 430 1075 260 208 93
VM32-4 7.5 715 430 1145 260 208 102
VM32-5 11 890 490 1380 330 255 172
VM32-6 11 960 490 1450 330 255 176
VM32-8 15 1100 490 1590 330 255 192
VM32-10 18.5 1240 550 1790 330 255 222
VM32-12 22 1380 590 1970 360 285 263
VM42 SERIES
VM42-1 4 561 335 896 230 188 92
VM42-2 7.5 641 430 1071 260 208 107
VM42-3 11 826 490 1316 330 255 175
VM42-4 15 906 490 1396 330 255 187
VM42-5 18.5 986 550 1536 330 255 208
VM42-6 22 1066 590 1656 360 285 251
VM42-7 30 1146 660 1806 400 310 315
VM42-8 30 1226 660 1886 400 310 319
VM42-9 37 1306 660 1966 400 310 343
VM42-10 37 1386 660 2046 400 310 347
VM42-11 45 1466 700 2166 450 345 413
VM42-12 45 1546 700 2246 450 345 417
VM65 SERIES
VM65-2A 7.5 644 430 1074 260 208 120
VM65-2 11 754 490 1244 330 255 155
VM65-3A 15 836 490 1326 330 255 195
VM65-4 22 919 575 1494 360 285 258
VM65-4B 18.5 919 550 1469 330 255 208
VM65-5A 30 1001 660 1661 400 310 345
VM65-6B 30 1084 660 1744 400 310 350
VM90 SERIES

VM90-3A 18.5 865 550 1415 330 255 212

VM90-3 22 865 590 1455 360 285 265
VM90-4A 30 957 660 1617 400 310 348
VM90-4 30 957 650 1607 400 310 312
VM90-5 37 1049 660 1709 400 310 375
VM90-6 45 1141 700 1841 460 340 438
Vertical Multistage Pumps
MOTOR TECHNICAL SPECIFICATIONS – SINGLE PHASE
FLC Start/LRC Bearings
Motor 1Ø Frame IP Rating RPM Eff %
240V Ratio Drive End Non-D/End
0.55 71 V18 IP55 3.25 5.62 2828 70 6202-ZZ 6202-ZZ
0.75 80 V18 IP55 4.38 5.83 2815 72 6204-ZZ 6204-ZZ
1.1 80 V18 IP55 6.38 5.65 2830 75 6204-ZZ 6204-ZZ
1.5 90 V18 IP55 8.08 5.57 2850 76 6205-ZZ 6205-ZZ
2.2 90 V18 IP55 12.0 4.59 2830 77 6205-ZZ 6205-ZZ
3.0 100 V18 IP55 18.0* 5.0 2870 81 6206-ZZ 6205-ZZ
4.0 112 V18 IP55 22.0* 6.4 2910 84 6207-ZZ 6206-ZZ
*For 480V single phase operation multiply by 0.5.

MOTOR TECHNICAL SPECIFICATIONS – THREE PHASE

FLC Start/LRC Bearings
Motor 1Ø Frame IP Rating RPM Eff %
240V Ratio Drive End Non-D/End
0.75 80 V18 IP55 1.52 7.0 2842 80.8 6204-ZZ 6204-ZZ
1.1 80 V18 IP55 2.2 6.2 2828 82.4 6204-ZZ 6204-ZZ
1.5 90 V18 IP55 3.1 5.3 2800 78.0 6205-ZZC3 6205-ZZC3
2.2 90 V18 IP55 4.2 6.7 2800 85.0 6205-ZZC3 6205-ZZC3
3 100 V18 IP55 5.7 6.8 2853 86.2 6206-ZZC3 6206-ZZC3
4 112 V18• IP55 7.3 6.7 2902 86.8 6306-S 6306-S
5.5 132 V18• IP55 9.8 7.4 2916 89.9 7308B 6308ZZC3
7.5 132 V18• IP55 13.3 7.4 2892 87.0 7308B 6308ZZC3
11.0 160 V1• IP55 19.4 7.9 2925 88.3 7309B 6309ZZC3
15.0 160 V1• IP55 25.5 8.4 2931 89.3 7309B 6309ZZC3
18.5 160 V1• IP55 31.3 8.3 2938 91.4 7309B 6309ZZC3
22.0 180 V1• IP55 36.8 7.7 2951 90.4 6311 7311
30.0 200 V1• IP55 49.4 7.9 2950 91.4 6312 7312
37.0 200 V1• IP55 60.9 7.6 2950 92.1 6312ZZC3 7312B
45.0 225 V1• IP55 74.8 7.8 2962 92.6 6313C3 7313B

• Special motor bearings fitted for thrust management.

 Vertical Multistage Pumps

davey.com.au | daveynz.co.nz
H/O & MFG SCORESBY

H/O & MFG SCORESBY

This literature is not a complete guide to product usage. All images provided in this document are for illustration purposes only. Further information
DWP0641-3/0519

is available from your Davey Dealer, Davey Support Centre and from the relevant product Installation and Operating Instructions. Must be read in
Quality Environment conjunction with the relevant product Installation and Operating Instructions and all applicable statutory requirements. Product specifications may
ISO 9001 ISO 14001 change without notice. ® Davey is a registered trademark of Davey Water Products Pty Ltd. © Davey Water Products Pty Ltd 2019.