Scribd Logo
Upload

Welcome to Scribd!

  • 6 views

    60Hz LH LH875 6

    Uploaded by

    andres
    The document provides specifications for a submersible high head drainage pump model LH875. Key details include that it is a 75kW, 3-phase pump with a closed impeller made of high-chromium cast iron intended for stormwater, groundwater, and sand-carrying water. The pump has a 200mm discharge bore and connection, runs on a 75kW continuous duty motor, and includes protective devices for the motor and mechanical seal.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    60Hz LH LH875 6

    Uploaded by

    andres
    6 views4 pages
    The document provides specifications for a submersible high head drainage pump model LH875. Key details include that it is a 75kW, 3-phase pump with a closed impeller made of high-chromium cast iron intended for stormwater, groundwater, and sand-carrying water. The pump has a 200mm discharge bore and connection, runs on a 75kW continuous duty motor, and includes protective devices for the motor and mechanical seal.

    Original Description:

    60Hz_LH_LH875_6

    Original Title

    60Hz_LH_LH875_6

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides specifications for a submersible high head drainage pump model LH875. Key details include that it is a 75kW, 3-phase pump with a closed impeller made of high-chromium cast iron intended for stormwater, groundwater, and sand-carrying water. The pump has a 200mm discharge bore and connection, runs on a 75kW continuous duty motor, and includes protective devices for the motor and mechanical seal.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    6 views4 pages

    60Hz LH LH875 6

    Uploaded by

    andres
    The document provides specifications for a submersible high head drainage pump model LH875. Key details include that it is a 75kW, 3-phase pump with a closed impeller made of high-chromium cast iron intended for stormwater, groundwater, and sand-carrying water. The pump has a 200mm discharge bore and connection, runs on a 75kW continuous duty motor, and includes protective devices for the motor and mechanical seal.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Drainage Pumps

    LH-series
    SPECIFICATIONS Model LH875
    75kW, 3-phase

    Type of Pump Impeller


    Submersible high head drainage pump for construction Closed Impeller made of high-chromium cast iron
    and foundation works, floodwater drainage, etc.
    Solids Passage
    Type of Fluid 50Hz – 20mm
    Stormwater, groundwater, wash water, and 60Hz – 20mm
    sand-carrying water
    Mouth Ring
    Temperature: 0 to 40oC Made of high-chromium cast iron, excellent in
    abrasion-resistance
    Discharge Bore & Connection
    200mm, JIS 10kg/cm2 Screwed Flange Cable Entry with Anti-Wicking Block
    Watertight cable entry with strain-relief device. The anti-
    Motor Output wicking block prevents water incursion due to capillary
    75kW action should the power cable be damaged or the end
    submerged.
    Power Supply
    Three-phase Bearing
    Upper: Cylindrical roller bearing
    Starting Method Lower: Duplex angular contact ball bearing mounted
    Star-Delta back-to-back

    Motor Shaft
    Continuous-duty rated, dry-type induction motor 420 stainless steel

    Insulation Class: F Shaft Seal (Mechanical Seal)


    Degree of Protection: IP68 Furnished with a double-face mechanical seal located in
    oil chamber. Both upper and lower seal faces always run
    No. of Poles & Speed (Synchronous Speed) in a clean environment.
    2-pole, 3000/3600min-1 (50/60Hz)
    Upper Seal Face: SiC + SiC
    Power Supply Voltages & Rated Currents Lower Seal Face: SiC + SiC
    50Hz 60Hz
    380V – 140A 380V – 137A Pressure Relief Port
    400V – 130A 440V – 118A Protects the mechanical seal from over rated limits, and
    415V – 130A also protects the seal faces from abrasive particles by
    drawing particles away.
    Power Cable
    Sheath: Chloroprene rubber OIL LIFTER (Patented)
    Standard Length: 10m Equipped in oil chamber. It forcibly supplies lubricating
    200 to 600V supply: oil to the mechanical seal and continues to supply the oil

    ( )
    6 x 30mm2 to the upper seal faces even if lubricant falls below the
    1 x 1 x 22mm2 O.D. 41.1mm rated volume.
    3 x 2mm2
    Type of Lubricating Oil & Volume
    Dry Weight (excluding cable) Turbine Oil (ISO VG32), 6100ml
    865kg
    Motor Protection Device
    A miniature thermal protector is embedded in each
    winding of the motor. Should excessive heat builds up,
    the bimetal strip opens to cause the control panel to shut
    the power supply.

    Leakage Sensor
    Made of 304 stainless steel. It can be wired to a control
    panel to alert operators of water incursion into the oil
    chamber.

    Galvanic Anode
    Protects the pump from electric corrosion, made of
    aluminium alloy

    000

    You might also like