Pneumatic Actuator - Operating Conditions

1. Pressure Ranges
2 bar(29 psig) to 8 bar(116 psig) double acting
3 bar(44 psig) to 8 bar(116 psig) spring return

2. Temperature Ranges
*Std.(NBR O-rings): -20°C(-4°F) to+80°C(+176°F)
*LowerTemp. (HNBR O-rings): -40°C(-40°F) to +80°C(+176°F)
*High Temp. (Viton O-rings): -15°C(+5°F) to +150°C(+300°F)
Note: Special grease is required for low and high temperature
service condition.

3. Wide Range Available

The actuator range consists of 14 sizes, with torques from 9Nm
(80in.lbs) to 3,920Nm (34,660in.lbs) at 6 bar (87 psig) air supply. 7. Construction
Twin piston rack and pinion actuator design, suitable for indoor and
4. Operating Media outdoor installation.
Filtered dry or lubricated air for non-corrosive gas, water or light
hydraulic oil. The maximum particle size must not exceed 8. Connections
30 microns. Bottom drilling complies with ISO 5211/DIN 3337 to match valve.
Interface for solenoid valve, shaft top end and top drilling for
5. Stroke Adjustment assembling accessories are in accordance with VDI/VDE-3845,
0°and 90° with standard adjustment ± 5°. NAMUR standard.

6. Lubrication 9. Inspection
All moving parts are factory lubricated for entire life cycle of Every actuator is hydraulically tested, certified and guaranteed for
actuator. a minimum of 1,000,000 cycles.

Pneumatic Actuator - Featurs

4 End Caps
Epoxy coated(over 80um) die cast aluminum end caps provide
maximum resistance against potentially corrosive elements. Other
treatments such as Nickel Ceramic & PTFE Polyester coated are
available.

5. Pistons
The precisely-balanced and hard anodized treatment (over 30um)
die cast aluminum pistons are fitted with high quality rings and
guides. The twin rack and piston design creates a constant torque
output on all actuators.

6. Travel Adjustment
1. Indicator The standard adjustment is ± 5° in both the open and closed posi
A position indicator with Namur mounting is standard on all FASTACT tions through easily accessible external adjustment bolts.
pneumatic actuators for mounting accessories.
7. High Performance Springs
2. Pinion The high tensile steel springs are coated with Epoxy coated for
The hardened alloy steel pinion is precision ground and Nickel corrosion resistance and longer service. The pre-loaded springs can
plated (over 15um) in order to reduce friction, provide maximum be safely & rapidly disassembled.
wear resistance. Full conformance with the newest standards
of IS05211 & DIN3337. The dimensions can be customized and as 8. Bearings & Guides
options, stainless steel and aluminium are also available. The highly durable compound material provides high trust stability
with minimum friction and long life.
3. Actuator Body
The aluminum extrusion is hard anodized(over 30um) to protect 9. O-Rings
against wear and corrosion while reducing piston friction to the NBR O-rings provide trouble-free operation at standard temperature
absolute minimum. Other options such as Nickel ceramic, PTFE ranges. Viton and HNBR O-rings are available for high or low tem
polyester coated are available. perature applications.

01
1 Pneumatic Actuator - FDA Series
Pneumatic Actuator - Operating Conditions

Item Description Material Protection Qty Optional

1 Actuator Body Extruded Aluminum Alloy Hard Anodized (over 30um) 1 Nickel or PTFE coated

2 Pinion Alloy Steel Nickel Plated (over 15um) 1 SS or Alu Alloy

3* 0-Ring (Lower Pinion) NBR 1 Viton / HNBR

4* 0-Ring (Top Pinion) NBR 1 Viton / HNBR

5 Thrust Bearing (Pinion) Nylon 66 1

6 Spring Cip Stainless Steel 1

7 Piston Die Cast Aluminum Alloy Hard Anodized (over 30um)) 2

8* Piston Seal NBR 2 Viton / HNBR

9 Stroke Bolt Stainless Steel 2

10* Stroke Bolt O-Ring NBR 2 Viton / HNBR

11 Stroke Bolt Washer Stainless Steel 2

12 Stroke Bolt Retaining Nut Stainless Steel 2

13 End Cap Die Cast Alumunium Epoxy Coated (over 80um) 2 Nickel or PTFE coated

14* End Cap Seals NBR 2 Viton / HNBR

15 End Cop Bolts Stainless Steel 8

*Note : Recommended spare parts for maintenance

Pneumatic Actuator - FDA Series 01

2
 Pneumatic Actuator - FDA 052-270 Parts List

Item Description Material Protection Q’ty Optional

1 Indicator Plastic 1
2 Spring Clip Stainless Steel 1
3 Thrust Washer(Pinion) Stainless Steel 1
4 Thrust Bearing(Pinion) Nylon 66 1
5 Actuator Body Extruded Alluminum Alloy Hard Anodized(over 30um) 1 Nickel or PTFE coated
6 Piston Die Cast Aluminum Alloy Hard Anodized(over 30um) 2
7 Spring(Cart ridge) High Performance Spring Steel Epoxy Coated 0-12
8* End Cap Seals NBR 2 Viton / HNBR
9 End Cap Bolts Stainless Steel 8
10 End Cap Die Cast Aluminum Epoxy Coated(over 80um) 2 Nickel or PTFE coated
11* Piston Bearing Nylon 66 2
12* Piston Seal NBR 2 Viton / HNBR
13* PistonGuide Nylon 66 2
14 Stroke Bolt Stainless Steel 2
15 Stroke Bolt Retaining Nut Stainless Steel 2
16 Stroke Bolt Washer Stainless Steel 2
17* Stroke Bolt O-Ring NBR 2 Viton / HNBR
18* 0-Ring(Top Pinion) NBR 1 Viton / HNBR
19* Bearing(Top Pinion) Nylon 66 1
20* Thrust Bearing(Pinion) Nylon 66 1
21 Stroke Cam Stainless Steel 1
22 Pinion Alloy Steel Nickel Plated(over 25um) 1 S.S. or Alu.Alloy
23* Bearing(Lower Pinion) Nylon 66 1
24* 0-Ring(Lower Pinion) NBR 1 Viton / HNBR
25* Plug NBR 2 Viton / HNBR
*Note : Recommended spare parts for maintenance.

01
3 Pneumatic Actuator - FDA Series
Pneumatic Actuator - Double Acting

Sizing example of FASTACT double acting actuator: Valve torque

100Nm plus 20% safety factor= 120Nm. Minimum operating pressure
6bar (87psig). By reading down the 6bar (87 psig) column the figure
below 120Nm is 135Nm, The model number shown in the left hand
column is therefore FDA-092.

The operating principle of Double Acting Actuator

Air to port A forces the pistons outwards, causing the piston to turn Air to port B forces the pistons inwards, causing the piston to turn
counter-clockwise while air is being exhausted from port B. clockwise while air is being exhausted from port A.

Torque Table of Double Acting Actuator

Air Supply Pressure (unit bar)
Modul 2.0 2.5 3.0 4.0 4.5 5.0 5.5 6.0 7.0 8.0

Oulput Torque (Nm)
FDA-032 3.1 3.8 4.6 6.1 6.9 7.6 84 92 10.7 122
FDA-052 8.1 10.1 12.1 16.1 16.1 20.2 22.2 24.2 28.2 32.3
FDA-063 14.2 17.8 21.3 28.4 32.0 35.5 39.1 42.6 49.7 36.8
FDA-075 20.1 25.2 30.2 40.3 45.3 50.3 55.4 60.4 70.5 80.5
FDA-083 30.8 38.5 46.2 81.8 69.4 77.1 84.8 92.5 107.9 123.3
FDA-092 45.4 56.8 68.2 90.9 102.3 113.6 125.0 136.3 159.1 181.8
FDA-105 65.8 82.2 95.7 131.0 148.0 164.4 180.9 197.3 230.2 263.1
FDA-125 103.0 128.0 154.4 205.0 231.0 256.0 282.0 308.0 359.0 410.0
FDA 140 175.0 219.0 263.0 351.0 396.0 439.0 482.0 526.0 614.0 702.0
FDA-160 267.0 334.0 401.0 535.0 601.0 668.0 735.0 802.0 935.0 1059.0
FDA 19O 431.0 538.0 646.0 881.0 989.0 1077.0 1185.0 1292.0 1506.0 1723.0
FDA-210 526.0 659.0 789.0 1052.0 1184.0 1316.0 1447.0 1579.0 1842.0 2105.0
FDA 240 773.0 966 0 1100.0 1548.0 1740.0 1933.0 2126.0 2320.0 2706.0 3093.0
FDA-270 1174.0 1458.0 1761.0 2349.0 2642.0 2936.0 3229.0 3523.0 4110.0 4697.0
FDA-300 1526.0 1938.0 2289.0 3052.0 3434.0 3815.0 4197.0 4576.0 5341.0 6104.0

Pneumatic Actuator - FDA Series 01

4
 Pneumatic Actuator - Spring Return (Fail Safe)

Sizing example of FASTACT spring return actuator:

Spring to close when air fails(air to open):
Valve torque 60Nm plus 20% safety factor = 72Nm. Minimum
operating pressure: 6bar(87psig). The spring return FASTACT actuator
selected is FSA-105-12.The FSA-105-12 has the following output
torques:
1. Air torque 0°(valve close) = 124Nm > 72Nm
2. Air torque 90°(valve open) = 84Nm
3. Spring torque 90°(valve open) = 120Nm
4. Spring torque 0°(valve close) = 80Nm > 72Nm

The Operating Principle of single Acting Spring Return Actuator

Air to port A forces the pistons outwards, causing the springs to com- Loss of air pressure through port A allows the stored energy in the
press. The pinion turns counter-clockwise while air is being exhausted springs to force the pistons inwards. The pinion turns clockwise while
through port B. air is being exhausted through port A.

Mounting Variations Spring Arrangement

01
5 Pneumatic Actuator - FDA Series
Pneumatic Actuator - Torque Table (Nm)

Unit-Nm
Air Supply Pressure (Unit bar)
Spring Torque 2 .5 3.0 4.0 5.0 6.0 7.0 8.0
Model Spring Set
(Nm) Air Torque Output (Nm)
00 900 00 900 00 900 00 900 00 900 00 900 00 900 00 900
5 4.3 6.2 5.7 3.8 7.6 5.7 ...... ...... ...... ...... ...... ...... ...... ...... ...... ......
6 5.0 7.4 4.9 2.5 6.9 4.5 10.9 8.5 ...... ...... ...... ...... ...... ...... ...... ......
7 5.9 8.6 4 1.3 6 3.3 9.8 7.3 14 10.4 ...... ...... ...... ...... ...... ......
FSA-052 8 6.7 9.9 ...... ...... 5.2 2.0 9.2 6.0 13.2 9.1 17.2 14.1 ...... ...... ...... ......
9 7.6 11.1 ...... ...... 4.3 0.8 8.3 4.6 12.3 7.9 16.3 12.8 20.3 16.8 ...... ......
10 8.5 12.4 ...... ...... ...... ...... 7.4 3.6 11.5 6.7 15.5 11.6 19.5 15.6 ...... ......
11 9.3 13.6 ...... ...... ...... ...... 6.6 2.3 10.6 5.4 14.6 10.4 18.6 14.3 22.6 16.3
12 10.2 14.8 ...... ...... ...... ...... ...... ...... 9.7 4.2 13.8 9.1 17.8 12.2 22.6 17.1
5 6.8 10.4 11.4 7.7 15.0 11.4 22.3 14.9 ...... ...... ...... ...... ...... ...... ...... ......
6 8.2 12.5 10.1 5.7 13.6 9.3 20.9 16.6 28.3 23.9 ...... ...... ...... ...... ...... ......
7 9.6 14.6 8.6 3.6 12.5 7.2 19.5 14.5 26.8 21.9 ...... ...... ...... ...... ...... ......
8 10.9 16.7 ...... ...... 10.9 5.1 18.2 12.4 25.5 19.8 32.8 27 40.1 34.3 ...... ......
FSA-063 9 12.3 18.9 ...... ...... ...... ...... 16.8 10.4 24.1 17.7 31.4 24.9 38.7 32.2 ...... ......
10 13.7 20.9 ...... ...... ...... ...... 14.0 8.2 22.8 15.6 30 22.8 37.3 30.1 44.7 37.4
11 15.0 22.9 ...... ...... ...... ...... ...... ...... 21.5 13.5 28.7 20.7 36 28 43.3 35.3
12 16.4 25.0 ...... ...... ...... ...... ...... ...... 20 11.4 27.3 18.6 34.6 25.9 41.9 33.3
5 10.5 14.5 14.5 10.6 19.4 15.5 29.5 25.7 ...... ...... ...... ...... ...... ...... ...... ......
6 12.7 17.4 12.4 7.6 17.3 12.6 27.4 22.7 37.5 32.8 ...... ...... ...... ...... ...... ......
7 14.8 20.3 10.4 4.8 15.2 9.7 25.3 19.9 35.4 29.9 ...... ...... ...... ...... ...... ......
FSA-075 8 16.9 23.2 ...... ...... 13.1 6.8 23.1 16.9 33.3 27 43.2 37 53.3 47 ...... ......
9 19.0 26.1 ...... ...... ...... ...... 21.0 14.1 31.2 24.1 41.1 34.1 51.2 44.2 ...... ......
10 21.1 29.0 ...... ...... ...... ...... 19.0 11.1 28.8 21.2 39.0 31.2 49.1 41.2 59.1 51.2
11 23.2 31.9 ...... ...... ...... ...... ...... ...... 27 18.3 37 28.3 47 38.4 57 48.4
12 25.3 34.7 ...... ...... ...... ...... ...... ...... 24.9 15.4 34.9 25.4 44.9 35.4 54.9 45.4
5 15.8 23.0 23.3 16.1 31.1 24.0 46.8 39.7 ...... ...... ...... ...... ...... ...... ...... ......
6 19.0 27.6 20.1 11.5 28.0 19.3 43.7 35.1 59.4 50.7 ...... ...... ...... ...... ...... ......
7 22.1 32.2 17.0 6.9 24.8 14.8 40.5 30.5 56.2 48.2 ` ...... ...... ...... ...... ...... ......
FSA-083 8 25.3 35.8 ...... ...... 21.7 10.1 37.4 25.8 53.1 41.5 68.8 57.2 84.5 72.9 ...... ......
9 28.5 41.4 ...... ...... ...... ...... 34.2 21.3 49.9 37 65.6 52.6 81.2 68.3 ...... ......
10 31.6 46.0 ...... ...... ...... ...... 31.0 16.6 46.7 32.3 62.4 48.0 78.1 63.7 93.8 79.3
11 34.8 50.6 ...... ...... ...... ...... ...... ...... 43.6 27.7 59.3 43.4 75.0 59.1 90.6 74.8
12 38.0 55.2 ...... ...... ...... ...... ...... ...... 40.4 23.2 56.1 38.9 71.7 54.5 87.4 70.2
5 23.3 34.4 33.1 22.0 44.2 33.2 66.8 55.9 ...... ...... ...... ...... ...... ...... ...... ......
6 28.0 41.2 28.4 15.2 39.6 25.4 62.2 49.0 84.8 71.6 ...... ...... ...... ...... ...... ......
7 32.7 48.1 23.8 8.2 34.9 19.4 57.5 42.1 80.2 64.7 ...... ...... ...... ...... ...... ......
FSA-092 8 37.3 55.0 ...... ...... 31.3 12.6 52.9 35.2 75.5 57.9 98.1 80.5 120.7 103 ...... ......
9 42.0 61.9 ...... ...... ...... ...... 48.2 28.4 70.9 51.0 93.5 73.5 116 96.1 ...... ......
10 46.7 68.7 ...... ...... ...... ...... 43.6 21.5 66.2 44.1 88.8 66.7 111.3 89.2 134.0 111.8
11 51.4 75.6 ...... ...... ...... ...... ...... ...... 61.5 37.2 84.1 59.9 106.6 82.4 129.2 105
12 56.0 82.5 ...... ...... ...... ...... ...... ...... 56.8 30.4 79.4 53.0 101.9 75.5 124.5 96.1
5 31.6 49.2 51.0 33.4 67.5 49.9 100.6 83.0 ...... ...... ...... ...... ...... ...... ...... ......
6 38.0 59.1 44.7 23.5 61.1 40.0 94.2 73.2 127.3 106.2 ...... ...... ...... ...... ...... ......
7 44.3 58.9 38.4 13.7 54.9 30.3 87.9 63.4 121.0 96.4 ...... ...... ...... ...... ...... ......
FSA-105 8 50.6 78.7 ...... ...... 48.5 20.4 81.6 53.5 114.7 86.5 147.7 119.6 180.8 152.7 ...... ......
9 56.9 88.6 ...... ...... ...... ...... 75.3 43.7 108.4 76.8 141.5 109.6 174.5 142.9 ...... ......
10 63.3 98.4 ...... ...... ...... ...... 68.9 33.4 102.0 66.5 135.1 99.6 168.2 132.6 201.2 165.7
11 69.6 108.3 ...... ...... ...... ...... ...... ...... 95.7 57.0 128.7 90.1 161.8 123.1 194.8 156.2
12 75.9 118.1 ...... ...... ...... ...... ...... ...... 89.4 47.5 122.5 80.6 155.5 113.6 188.6 146.7
5 52 79 73 47 98 72 148 122 ...... ...... ...... ...... ...... ...... ...... ......
6 63 94 63 31 88 46 138 107 188 157 ...... ...... ...... ...... ...... ......
7 73 110 52 15 77 40 127 90 178 141 ...... ...... ...... ...... ...... ......
FSA-125 8 84 125 ...... ...... 67 25 117 75 167 125 217 176 268 226 ...... ......
9 94 141 ...... ...... ...... ...... 107 59 157 109 207 159 257 210 ...... ......
10 105 157 ...... ...... ...... ...... 96 44 146 94 196 144 247 194 297 245
11 115 173 ...... ...... ...... ...... ...... ...... 136 78 186 128 236 178 285 228
12 125 188 ...... ...... ...... ...... ...... ...... 125 63 176 113 226 163 276 213

Pneumatic Actuator - FDA Series 01

6
 Pneumatic Actuator - Torque Table (Nm)

Unit-Nm
Air Supply Pressure (Unit bar)
Spring Torque 2 .5 3.0 4.0 5.0 6.0 7.0 8.0
Model Spring Set
(Nm) Air Torque Output (Nm)
00 900 00 900 00 900 00 900 00 900 00 900 00 900 00 900
5 86 129 126 85 171 127 256 213 ...... ...... ...... ...... ...... ...... ...... ......
6 103 155 111 59 154 102 239 187 325 273 ...... ...... ...... ...... ...... ......
7 120 181 94 33 137 76 222 162 308 247 ...... ...... ...... ...... ...... ......
FSA-140 8 137 206 ...... ...... 120 50 205 136 291 221 376 307 462 392 ...... ......
9 155 232 ...... ...... ...... ...... 187 110 273 196 358 281 444 367 ...... ......
10 172 256 ...... ...... ...... ...... 170 84 256 159 341 255 427 340 512 426
11 189 264 ...... ...... ...... ...... ...... ...... 238 143 324 229 409 314 495 400
12 206 310 ...... ...... ...... ...... ...... ...... 221 118 307 203 392 289 478 374
5 140 208 193 124 259 191 392 324 ...... ...... ...... ...... ...... ...... ...... ......
6 168 250 165 83 232 149 365 282 498 415 ...... ...... ...... ...... ...... ......
7 196 292 137 41 203 107 336 240 469 373 ...... ...... ...... ...... ...... ......
FSA-160 8 223 333 ...... ...... 176 66 309 199 442 237 575 465 708 598 ...... ......
9 251 375 ...... ...... ...... ...... 280 157 413 290 546 423 679 556 ...... ......
10 279 417 ...... ...... ...... ...... 253 115 386 248 519 381 652 514 785 647
11 307 458 ...... ...... ...... ...... ...... ...... 358 207 491 340 624 473 757 606
12 335 500 ...... ...... ...... ...... ...... ...... 330 165 463 298 596 431 729 564
5 200 309 332 222 438 329 651 542 ...... ...... ...... ...... ...... ...... ...... ......
6 240 371 292 161 398 267 611 480 824 693 ...... ...... ...... ...... ...... ......
7 260 433 252 99 358 205 571 418 784 631 ...... ...... ...... ...... ...... ......
FSA-190 8 320 495 ...... ...... 318 143 531 356 744 569 957 782 1169 995 ...... ......
9 360 557 ...... ...... ...... ...... 491 295 704 507 917 720 1130 933 ...... ......
10 400 618 ...... ...... ...... ...... 451 233 664 446 877 658 1090 871 1302 1084
11 440 660 ...... ...... ...... ...... ...... ...... 624 384 837 597 1050 809 1263 1022
12 460 742 ...... ...... ...... ...... ...... ...... 584 322 797 535 1010 748 1223 960
5 275 360 390 285 523 418 789 684 ...... ...... ...... ...... ...... ...... ...... ......
6 330 456 335 209 468 342 734 608 1000 874 ...... ...... ...... ...... ...... ......
7 385 532 280 133 413 256 679 532 945 798 ...... ...... ...... ...... ...... ......
FSA-210 8 440 606 ...... ...... 358 190 624 456 890 722 1156 968 1422 1254 ...... ......
9 495 664 ...... ...... ...... ...... 569 380 835 646 1101 912 1367 1178 ...... ......
10 550 760 ...... ...... ...... ...... 514 304 780 570 1046 836 1312 1102 1578 1388
11 605 836 ...... ...... ...... ...... ...... ...... 725 494 991 750 1257 1026 1523 1292
12 660 912 ...... ...... ...... ...... ...... ...... 670 418 936 684 1202 950 1468 1216
5 410 554 552 409 744 600 1129 985 ...... ...... ...... ...... ...... ...... ...... ......
6 492 665 470 297 662 489 1047 874 1432 1259 ...... ...... ...... ...... ...... ......
7 575 775 388 187 580 379 964 764 1349 1149 ...... ...... ...... ...... ...... ......
FSA-240 8 658 886 ...... ...... 496 268 883 653 1257 1037 1652 1422 2037 1807 ...... ......
9 739 998 ...... ...... ...... ...... 800 542 1185 926 1569 1311 1954 1696 ...... ......
10 821 1108 ...... ...... ...... ...... 718 431 1103 816 1488 1201 1872 1586 2257 1970
11 903 1219 ...... ...... ...... ...... ...... ...... 1021 705 1406 1090 1791 1474 2176 1859
12 985 1330 ...... ...... ...... ...... ...... ...... 939 594 1323 979 1706 1363 2093 1748
5 560 787 903 675 1195 968 1779 1552 ...... ...... ...... ...... ...... ...... ...... ......
6 672 943 790 519 1083 811 1667 1396 2252 1981 ...... ...... ...... ...... ...... ......
7 783 1101 679 361 972 654 1556 1238 2141 1823 ...... ...... ...... ...... ...... ......
FSA-270 8 895 1258 ...... ...... 860 497 1444 1081 2029 1666 2614 2252 3199 2836 ...... ......
9 1007 1416 ...... ...... ...... ...... 1332 923 1917 1509 2502 2094 3067 2678 ...... ......
10 1119 1572 ...... ...... ...... ...... 1220 767 1805 1352 2390 1937 2974 2521 3560 3107
11 1231 1730 ...... ...... ...... ...... ...... ...... 1693 1194 2278 1779 2862 2364 3448 2949
12 1342 1887 ...... ...... ...... ...... ...... ...... 1582 1037 2167 1623 2751 2207 3336 2792

01
7 Pneumatic Actuator - FDA Series
Pneumatic Actuator - Dimension Table

Dimensions Table Unit : mm

inch

Model A B C D E F G H I N J K L M Air Connection
110 45 45 65 22.5 22.5 11 50 25 9 M5 x 7.5
FS-032 F03 ...... 1/8”
4.33 1.77 1.77 2.56 0.80 0.80 0.80 1.97 0.98 0.35 #10-24UNF

146 72 60 92 26 41.5 14 80 30 11 M6 x 10 M5 x 7.5
FS-052 F05 F03 1/8” or 1/4” (std)
5.74 2.83 2.36 3.62 1.02 16.33 0.55 3.15 1.15 0.43 1/4”-20UNC #10-24UNF
169 88 69.5 108 33.5 47 17 80 30 14 M8 x 13 M6 x 10
FS-063 F07 F05 1/8” or 1/4”(std)
6.65 3.45 27.36 4.25 1.31 1.85 0.66 3.15 1.16 0.55 5/16”-20UNC 1/4”-20UNC
186 100 78 120 39 53 17 80 30 14 M8 x 13 M6 x 10
FS-075 F07 F05 1/8” or 1/4”(std)
7.32 3.93 3.07 4.72 1.53 2.08 0.66 3.15 1.18 0.55 5/16”-20UNC 1/4”-20UNC
210 109 86 129 40 57 23 80 30 17 M8 x 13 M6 x 10
FS-083 F07 F05 1/8” or 1/4”(std)
6.26 4.29 3.38 5.07 1.57 2.24 0.9 3.15 1.18 0.67 5/16”-20UNC 1/4”-20UNC
264 117 90.5 137 44.5 58.5 23 80 30 17 M8 x 13 M6 x 10
FS-092 F07 F05 1/8” or 1/4”(std)
10.39 4.6 3.56 5.39 1.75 2.3 0.9 3.15 1.18 0.67 5/16”-20UNC 1/4”-20UNC
272 133 104 153 52 64 28 80 30 22 M10 x 15 M6 x 13
FS-105 F10 F07 1/4”
10.7 5.23 4.09 6.02 2.04 2.51 1.1 3.15 1.18 0.87 3/8”-20UNC 5/15”-20UNC

302 155 120 185 60 74.5 28 130 30 22 M10 x 15 M6 x 13
FS-125 F10 F07 1/4”
11.88 6.1 4.72 7.28 2.36 2.93 1.1 5.11 1.18 0.67 3/8”-20UNC 5/15”-20UNC
306 172 125 202 65 77 35 130 30 27 M12 x 20 M10 x 16
FS-140 F12 F10 1/4”
15.66 6.77 4.92 7.95 2.55 3.03 1.37 5.11 1.18 1.06 1/2”-20UNC 3/8”-20UNC

456 197 142 227 74 87 35 130 30 27 M12 x 20 M10 x 16
FS-150 F12 F10 1/4”
17.95 7.75 5.59 8.93 2.91 3.42 1.37 5.11 1.18 1.08 1/2”-20UNC 3/8”-20UNC

534 230 172 260 86 103 43 130 30 36 M16 x 20
FS-190 F14 ...... 1/4”
21.02 9.05 6.77 10.23 3.38 4.05 1.69 5.11 1.18 1.42 5/8”-20UNC
536 255 194 285 97 113 43 130 30 36 M16 x 20
FS-210 F14 ...... 1/4”
21.1 10.03 7.63 1.12 3.81 4.44 1.69 5.11 1.18 1.42 5/8”-20UNC
612 290 230 320 115 130 55 130 30 40 M20 x 25
FS-240 F15 ...... 1/4” or 3/8” (std)
24.00 11.41 9.05 12.59 4.52 5.11 2.10 5.11 1.18 1.81 3/4”-20UNC
718 330 252 360 126 147 55 130 30 40 M20 x 25
FS-270 F15 ...... 1/4” or 1/2” (std)
28.26 12.99 9.92 14.17 4.96 5.78 2.16 5.11 1.16 1.61 3/4”-20UNC
* Dimensions for reference only, subject to change

Pneumatic Actuator - FDA Series 01

8
 Pneumatic Actuator - Technical Data

Air Consumption - Air Volume Opening & Closing

Air Volume@opening Air Volume@closinging Air Volume@opening Air Volume@closinging
Model Model
(liter/cu.in) (liter/cu.in) (liter/cu.in) (liter/cu.in)
0.03 0.04 1.20 1.60
FS-32 VK-125
1.71 2.32 73.22 97.62
0.09 0.12 1.70 2.40
FS-52 VK-140
5.49 7.32 103.72 145.43
0.14 0.20 2.60 3.70
FS-63 VK-160
8.54 12.20 158.63 225.75
0.21 0.30 4.20 5.90
FS-75 VK-190
12.81 18.30 256.25 359.96
0.29 0.41 5.70 8.20
FS-83 VK-210
17.69 25.02 347.77 500.31
0.49 0.71 9.00 12.80
FS-92 VK-240
29.90 43.32 549.12 780.97
0.70 0.99 12.60 17.90
FS-105 VK-270
42.71 60.40 768.76 1092.13

The Table of Actuators Weight & Opening Closing Time

FS-032 FS-052 FS-063 FS-075 FS-083 FS-092 FS-105
Model
D S D S D S D S D S D S D S

Screw stroke adj. for 1 ° adj. need 1/5 turn 1/5 turn 1/5 turn 1/5 turn 1/4 turn 1/4 turn

Opening time (Sec.) 0.03 — 0.2 0.25 0.25 0.3 0.3 0.35 0.4 0.5 0.5 0.6 0.7 0.8
Closing time (Sec.) 0.03 — 0.25 0.3 0.3 0.35 0.4 0.5 0.5 0.6 0.7 0.9 0.9 1.1
Approximate weight (Kg/Lbs) 0.5/1.1 — 1.0/2.2 1.0/2.2 1.6/3.5 1.8/4.0 2.6/5.7 3.1/6.8 3.1/6.8 3.6/7.9 4.9/10.8 5.7/12.5 5.5/14.3 7.7/16.9

FS-125 FS-140 FS-160 FS-190 FS-210 FS-240 FS-270
Model
D S D S D S D S D S D S D S

Screw stroke adj. for 1 ° adj. need 1/4 turn 1/4 turn 1/4 turn 1/3 turn 1/3 turn 1/3 turn 1/3 turn

Opening time (Sec.) 0.9 1.1 1.3 1.5 1.6 1.8 2.2 2.4 2.9 3.4 3.8 4.3 4.5 5.0
Closing time (Sec.) 1.2 1.4 1.6 1.9 1.9 2.2 2.6 3.0 3.8 4.1 4.4 5.0 5.0 5.5
Approximate weight (Kg/Lbs) 9.9/21.8 11/24.2 13.8/30.4 16.3/35.9 19/41.8 24/52.8 28/61.6 34/74.8 37/81.4 45/99 52/114.4 64/140.8 85/187 104/228.8

Order Information
Type Model Spring Set Seals Options
FDA 032 Blank Blank 120
Double Acting Actuator 052 (Double Acting Actuator) (standard NBR seals) 120°operation
063 05 180
FSA 075 06 HT= Viton seals 180°operation
Spring Return Actuator 083 07 (for high temperature) SS
092 08 Stainless Steel Housing
FDAN 105 09 LT= Silicone seals
Double Acting Actuator 125 10 (for low temperature)
(Nickel Plated Housing) 140 11
160 12
FSAN 190
Spring Return Actuator 210
(Nickel Plated Housing) 240
270
Note: The part numbers are represented as the following: Type-Model-Spring Set-Seals-Options

01
9 Pneumatic Actuator - FDA Series
P n e u m a t i c A c t u a t o r

Pneumatic Ball Valve

Q611F-16P/R Q670-16P/R
3pc pneumatic ball valve (Screw thread) (Screw thread)
Norminal diameter: DN15-100 Pressure range: <1000PSI (6.9Mpa) Norminal diameter: DN15-100 Pressure range: <1000PSI (6.9Mpa)
Medium Temp: -10’C~+180t: Environment Temp: -10<C~+60’C Body Medium Temp: -10’C~+180t: Environment Temp: -10<C~+60’C Body
material: Stainless steel Sealing:PTFE material: Stainless steel Sealing:PTFE
Body of actuator: Aluminium alloy, Control pressure: 3-8bar Body of actuator: Aluminium alloy, Control pressure: 3-8bar
Control feature: Double acting. Single acting Control feature: Double acting. Single acting
Standard: Rp(BSP) ;Rc(BSPT); NPT Standard: Rp(BSP) ;Rc(BSPT); NPT
Applicable medium: water, gas, oil, acid, alkali, etc Applicable medium: water, gas, oil, acid, alkali, etc

Q641F-16P/R Q691-10PVC
2pc pneumatic ball valve (Flanged) Pneumatic PVC ball valve
Norminal diameter: DN15-300, Pressure range: 1.6-6.4Mpa Norminal diameter: DN15-100 Pressure range: 0-10bar Medium Temp:
Medium Temp: -1, Environment Temp: -10”C~+60t; -10t!~+180’C Environment Temp: -10t~+60cC Body material: UPVC. PVC
Body material: Stainless steel. Cast steel Sealing:PTFE Sealing:PTFE, Body of actuator: Aluminium alloy Control pressure: 3-8bar
Body of actuator: Aluminium alloy, Control pressure: 3-8bar Control feature: Double acting. Single acting
Control feature: Double acting. Single acting Connection: SW,Flanged, Screw thread.
Standard: GB. ANSI. DIN’JIS Welding,True Union Applicable medium: water, gas, etc
Applicable medium: water, gas, oil, acid, alkali, etc

Q614 (5 ) F-16P/R Q641H-16C/P/R

3-way pneumatic ball valve (Screw thread) Pneumatic ball valve (hard-sealing)
Norminal diameter: DN15-50 Pressure range: sElOOOPSI (6.9Mpa) Medium Norminal diameter: DN15-300 Pressure range: 1.6-6.4Mpa Medium Temp:
Temp: -10’C~+180’C Environment Temp: -10<C~+60’fc Body material: -30t~+350t Environment Temp: -20t!~+60t Body material: Stainless steel.
Stainless steel. Cast steel Sealing : PTFE Cast steel Seal level:ANSI B 16-104,CLASS VI Sealing: ss316;D802;D577
Body of actuator: Aluminium alloy, Control pressure: 3-8bar Body of actuator: Aluminium alloy Control pressure: 3-8bar Control feature:
Control feature: Double acting, Single acting, Standard: L-type, T-type Double acting. Single acting Standard: GB, ANSI, DIN’JIS
Standard: Rp(BSP) :Rc(BSPT); NPT Applicable medium: water, gas, oil, acid, alkali, etc
Applicable medium: water, gas, oil, acid, alkali, etc

Q681F-10P/R Q671F-16P/R

Sanitary pneumatic ball valve Italy thin-type ball valve
Norminal diameter: DN15-100 Pressure range: 0-1.0Mpa Medium Temp: Norminal diameter: DN15-100 Pressure range: 0-1.6Mpa Medium Temp:
-10t;~+180t; Environment Temp: -10<C~+60t Body material: Stainless -20t)~+180t: Environment Temp: -20cC~+60t; Body material: Stainless
steel Sealing:PTFE, Body of actuator: Aluminium alloy, steel. Cast steel Sealing:PTFE, Body of actuator: Aluminium alloy Control
Control pressure: 3-8bar, Control feature: Double acting. Single acting pressure: 3-8bar Control feature: Double acting, Single acting
Standard: DIN,ISO,SMS,3A,IDF Applicable medium: water, gas, oil, acid, alkali, etc
Applicable medium: water, gas, oil, acid, alkali, etc

Pneumatic Butterfly Valve

D671X-10 D671H-10P/R
Pneumatic butterfly valve ( Wafer) Pneumatic butterfly valve (hard sealing)
Norminal diameter: DN40-600 Pressure range: 0-1.OMpa Working Temp: Norminal diameter: DN40-400 Pressure range: 1.6-6.4Mpa Medium
-20tC~+160’C Body: gray cast-iron* ductile cast iron* Temp: -30”C~+350t: Environment Temp: -20<C~+60’:C Body material:
Cast steel* Stainless steel Disc: ductile cast iron* Cast steel* Stainless Stainless steel, Cast steel Sealing: ss316;D802;D577 Seal leveLANSI B16-
steel* nickel alloy Feature: Double bubble & zero leakage, 104,CLASS VI Body ot actuator: Aluminium alloy Control pressure: 3-8bar
double (single) action;Stem without pin Medium: drinking water* sewage* Control feature: Double acting. Single acting
high purity water* seawater* air Sealing: NBR;EPDM;FPM,PTFE Control
pressure: 3-8bar

D671X-10P/R D671-10PVC
Pneumatic Vacuum butterfly valve Pneumatic PVC butterfly valve
Norminal diameter: DN40-400 Pressure range: 0-10bar.0-1 .OMpa Work- Norminal diameter: DN40-350 Pressure range: 0-1 .OMpa Medium Temp:
ing Temp: -20t~+120t EnvironmentTemp: -20tC~+60<C Body material: -20<C~+80CC Environment Temp: -20’C~+60<C Body material: UPVC.
Stainless steel Sealing: NBR;EPDM;FPM Body of actuator: Aluminium alloy PVC Sealing: NBR;EPDM;FPM Body of actuator: Aluminium alloy Control
Control pressure: 3-8bar Feature: Double acting. Single acting pressure: 3-8bar Feature: Double acting. Single acting

D671X-10 KS-D671X-10
Pneumatic Butterfly valve (Lug type) Pneumatic KS butterfly valve
Norminal diameter: DN40-600 Pressure range: 0-1 .OMpa Medium Temp: Norminal diameter: DN40-200, Pressure range: 0-1 .OMpa
-20”C~+120”C Working Temp: -20CC-+120CC Body: gray cast-iron, duc- Working Temp: -20t~+120t:, Body: Aluminium alloy
tile cast iron. Cast steel. Stainless steel Disc: ductile cast iron. Cast steel. Sealing: NBR;EPDM;FPM, Disc: SS304, SS316
Stainless steel, nickel alloy Feature: Double bubble & zero leakage, double Feature: Double bubble & zero leakage, double (single) action;Stem without
(single)action, Stem without pin Medium: drinking water, sewage, high pin Medium: drinking water, sewage, high purity water, seawater, air
purity water, seawater, air Control pressure: 3-8bar Control pressure: 3-8bar

D621F-10P/R D641X-10C/P/R
Sanitary pneumatic butterfly valve Pneumatic flanged butterfly valve
Norminal diameter: DN25-200 Pressure range: 0-10bar Working Temp: Norminal diameter: DN40-600
-20t~+120’C Sealing: NBR,EPDM,CSM,Silicon rubber Body: SS304;SS316 Pressure range: 0-1 .OMpa, Working Temp: -20t:~+120<C
Disc: Stainless steel Feature: Double bubble & zero leakage, double (single) Body: gray cast-iron* ductile cast iron* Cast steel*
action,Stem without pin Medium: drinking water, high purity water, Stainless steel Disc: ductile cast iron* Cast steel* Stainless steel* nickel
seawater, air Control pressure: 3-8bar alloy, Feature: Double bubble & zero leakage, double (single)
action, Stem without pin Medium: drinking water* sewage* high purity
water* seawater* air Sealing: NBR;EPDM;FPM Control pressure: 3-8bar
flanged standard:GB,ANSI,DIN,JIS