SI3000 Pono Datasheet PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

DATASHEET

SI3000 Pono
The Iskratel SI3000 Pono is a high-port-density, stand-alone, GPON Optical Line Termination (OLT) product.
One OLT port delivers up to 2.5 Gbps in the downstream direction and 1.25 Gbps in the upstream direction,
and typically covers up to 64 users. By using all 8 OLT ports the product can cover 512 users. The 1U design
is a cost-effective, easy-to-deploy product, ideal for interconnecting homes, apartments or remotely located
MSANs. Using a rich networking feature set if offers flexible network designs for the delivery of next-
generation voice, video and data services (including high-speed internet access & real-time video
streaming).

The SI3000 Pono provides 8 GPON OLT ports, 8 combo 1G and 2 XFP-based 10G network interfaces. Each
GPON interface accommodates up to 64 ONTs through the optical splitter.

Key Features and Benefits


• Non-blocking architecture
• Easy deployment in space-constrained locations
• Small initial investment compared to modular products
• GPON and GE P2P connectivity from the same product
• Temperature-hardened design (+65⁰C ambient temperature) that minimizes cooling system costs
• Advanced networking features for the secure, reliable and high-quality delivery of triple-play
services
• DBA (Dynamic Bandwidth Allocation) for bandwidth assurance (fixed, assured, best effort)
• Optical power diagnostics and the measurement of the distance between OLT and ONT
• Extended reach (up to 60km) configuration profiles

The high-density SI3000 Pono 1U product represents a quick, easy-to-deploy and cost-effective solution for
residential triple-play services & VLAN-based business Ethernet services. Its non-blocking architecture and
intelligent traffic processing enable service delivery with uncompromising quality.

Using the Dynamic Bandwidth Allocation (DBA) algorithm a service provider is able to generate more
revenue from FTTH networks without boosting raw bandwidth by increasing the percentage of acceptable
traffic oversubscription.

Based on RSSI (Received Signal Strength Indication) and DDM (Digital Diagnostic Management) embedded
on the GPON SFP modules, from SI3000 Pono the operator can read the transmitted and received power
budget of the OLT port itself and measure the ONT side statuses. Based on this information the distance
between the OLT and ONT can be identified. Optical power-budget diagnostic features minimize the
operational costs of the operators.

When the power budget, split ratio, cascading, quality of fiber connection make it possible to have a long
reach GPON, the operator is able to make the maximum possible gain by configuring extended-reach
profiles.

Traffic prioritization and rich QoS mechanisms offer the efficient use of bandwidth resources and provide the
forwarding classes used for the transportation low-latency flows.

Obr.: 70-158c MAD105200-GEE-010


DATASHEET

Technical Specifications
Interfaces
Network interfaces - Optical 8 SFP 100/1000Mbps Ethernet
Network interfaces – Cu 8 RJ45 100/1000Mbps Ethernet
Network interfaces – XFP 2 XFP-based 10Gbps Ethernet
Access interfaces 8 SFP-based GPON (ITU-T G.984.1,2,3,4 compliant)
Inbound management Serial RS-232
Outbound management 10/100BT management interface
Bandwidth/distance
Downstream bandwidth per OLT 2.488Gbps
Upstream bandwidth per OLT 1.244Gbps
Max split per OLT 1:64
Max. distance SFP Class B+ -28dB link budget, 20 km reach
Max. distance SFP Class C+ -32dB link budget, 60 km maximum reach
Performance
Throughput 86 Gbps
Standard support
OMCI ITU-T G.984.1- 984.4 OMCI
Ethernet IEEE 802.3
Ethernet switching (L2) features
Switching None blocking, Support for jumbo frames
Redundancy RSTP (802.1w), EAPS (RFC3619)
Link Aggregation Static LAG & LACP 802.3ad
VLAN VLAN 802.1p/Q support
IP Multicast support IGMP v2 snooping, Dense / sparse multicast support
GPON Quality of Service Traffic descriptors based on G.984.3
Security features
Authentication RADIUS Authentication
User Line Traceability DHCP Agent with Option 82
Management features
Management interfaces CLI (Console, Telnet), SNMPv2c, Web Graphical Interface
IP assignment DHCP or Static
Management protocols SNMPv2c
Firmware upgrading FTP
Time Synchronization SNTP
Events collecting Event/ Error Log/Syslog
Environmental conditions
Operating Temperature -40ºCto +65ºC
Storage temperature -40ºC to +70ºC
Humidity Up to 85%, non-condensing
Power Supply & Consumption DC -43.75V to -62V (Dual/Redundant Inputs), 109W
Dimensions 43,7mm H (1U) x 230,2 mm D x 439,7 mm W (19’’)

Ordering code Description


SBB2120GD  SI3000 Pono, 1U chassis, 8 OLT, 8 FE/GE, 2x 10GE, DC 
SBB2138GD SI3000 Pono, 1U chassis, 8 OLT, 8 FE/GE, DC
SBB2122BA  GPON OLT SFP B+, digital RSSI, -40 to +85C 
SBB2122CA  GPON OLT SFP C+, digital RSSI, -40 to +85C 

Obr.: 70-158c MAD105200-GEE-010

This document is for informational purposes. The information contained herein is subject to change without notice.

You might also like