BDCOM GP3600-16 OLT Series

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

BDCOM GP3600-16 Series

High-density Rack-mounted GPON OLTs


BDCOM GP3600-16 Series High-density Rack-mounted GPON OLTs

Product Overview
BDCOM GP3600-16 OLT series complies with ITU-T G.984/G.988 and meets requirements

about GEPON OLT in Network Access Technical Requirements. It fully supports CTC20/2.1,

automatic discovery and cooperation with ONUs of different manufacturers.

BDCOM GP3600-16 Series supports the symmetric uplink 1.25Gbps/downlink 2.5Gbps PON

transmission rate, efficient bandwidth usage and Ethernet services, helping carriers to provide

reliable services to their users.

Its coupling ratio ups to 1:128, and its support of different hybrid ONU networks minimize the

carrier’s investment.

BDCOM GP3600-16 Series, based on the edge-cutting technologies, is strong in functions. A

few of its functions such as QoS guarantee, SLA and DBA can be easily listed out.

BDCOM GP3600-16 Series

Product Characteristics
BDCOM GP3600-16 Series has following advantages:

 GPON: Abiding by ITU-T G.984/G.988, BDCOM GP3600-16 series meets relevant

requirements of GPON OLT regulated in Network Access Technical Requirements and

China Telecom GPON Technical Requirements-CTC2.0;

 System Capacity: GP3600-16 Series supports 16 GPON ports.

 Uplink Interface: GP3600-16 series with 4 gigabit SFP ports, 4 gigabit combo ports, and

410G SFP+ ports.

 Dimensions: 1U, occupies a small space.


 Environmental Protection: low power consumption and low operating cost.

 Bus Optical Fiber Protection: the link can be automatically switched when trouble occurs in

the optical fiber;

 Power Characteristics: supports dual-AC, dual-DC and AC/DC power supply. The power

supply supports modularized design, hot-swap and EMC-3 standard. It well adapts to the

environment.

Technical Parameters

Attributes GP3600-16 Series

Maximum coupling ratio:1:128

System Capacity Backplane bandwidth:205G

MAC table capacity: 64K

PON 16 GPON ports

Interface 8 GE interfaces (4 gigabit SFP ports, 4 gigabit combo ports)


Uplink interface
4 10G ports

The transmission rate with downlink 2.5Gbps/uplink 1.25Gbps


Attributes of the PON
Class B+ and Class C+ GPON module
Interface
Security: ONU authentication mechanism

ITU-T G.984/G.988

IEEE 802.1D, Spanning Tree

IEEE 802.1Q, VLAN


Standards
IEEE 802.1w, RSTP

IEEE 802.3ad physical link static/dynamic aggregation (LACP)

Ethernet – II

Backpressure flow control (half duplex)

IEEE 802.3x flow control (full duplex)

QoS IEEE 802.1p, CoS

WRR, SP and FIFO queue schedule

Limiting the uplink/downlink rate based on each ONU


DBA and SLA

Port-based VLAN
VLAN
QinQ and flexible QinQ

L2 multicast

Multicast IGMP Snooping

MLD Snooping

Layer-3 routing functions Static routing, RIP and OSFP, OSFP/OSPFv3

Unidirectional Link Detection (UDLD)

Hot swap of the GPON optical module on the expanded slot

Reliability Optical path protection of GPON (b/c, hand-in-hand)

Abnormal luminescence ONU detection such as long

luminescence

Limiting the maximum number of users on each port

Port isolation

Network Security Packet storm control

Flow-based ACL access control function

Transmission data encryption on the PON interface

Various management modes such as CLI, SNMP and TELNET

Configuration Management Conducting software upgrade through TFTP

Debug output

Dimensions mm (W×D×H): 442.5x304x 44

Physical Characteristics Installation: standard 19-inch rack-mount

Weight:5.25Kg

Operating environment: 0℃-45℃; 10%-85% non-condensation


Environment
Storage environment: -40℃-80℃; 5%-95% non-condensation

Input voltage: AC90~240V, DC 36 ~ 72V


Power supply
dual-power input, DC/AC power supply and hot-swap
Ordering Information

Model Description

OLT with 16 PON ports (1 console port, 1 out-band 10M/100M port, 16

fixed PON ports(excluding the OLT SFP optical module), 4 gigabit


BDCOM GP3600-16
SFP ports, 4 gigabit combo ports, standard power supply AC90-240V,

expandable dual power supply, 19-inch rack-mounted installation)

OLT with 16 PON ports (1 console port, 1 out-band 10M/100M port, 8

fixed PON ports (excluding the OLT SFP optical module), 4 gigabit

BDCOM GP3600-16-DC SFP ports, 4 gigabit combo ports, standard power supply

DC36V~72V, expandable dual power supply, 19-inch rack-mounted

installation)

GP3600-16 OLT DC power supply (input voltage DC 36V~72V, max


PWR-200-DC
power 200W)

GP3600-16 OLT AC power supply (input voltage AC 90~240V, max


PWR-200-AC
power 200W)

OLT SFP module, Class B+ standard, downlink 2.5G/uplink 1.25G, TX


OLT-GSFP-B+
wavelength 1490nm, RX wavelength 1310nm, SC interface

OLT SFP module, Class C+ standard, downlink 2.5G/uplink 1.25G, TX


OLT-GSFP-C+
wavelength 1490nm, RX wavelength 1310nm, SC interface

For More Information


For more information about the BDCOM P3600-16 Series OLT, please contact your local
BDCOM account representative.

Shanghai Baud Data Communication Co., LTD.


No.123, Juli Road,
Pudong Zhangjiang High-Tech Park,
Shanghai 201203, P.R.China
www.bdcom.cn
Tel: +86-21-50800666
Copyright ©Shanghai Baud Data Communication Co., LTD. 2015. All Rights Reserved.
This document is BDCOM Public Information.
BDCOM reserves the right to alter, update and otherwise change the information contained in the
document from time to time without notice.

You might also like