Scribd Logo
Upload

Welcome to Scribd!

  • 12 views

    6Shfl¿Fdwlrq: Industrial Ethernet Switch

    Uploaded by

    Alaa
    This document provides specifications for an industrial Ethernet switch, including: - Support for Ethernet and Gigabit Ethernet standards, as well as network redundancy protocols like RSTP. - 10 ports, including 7 10/100TX ports and 3 combo ports that support 10/100/1000TX or fiber. - Management features like CLI, web interface, SNMP, port trunking, VLAN, QoS, and port security. - Rugged design with DIN rail or wall mounting, wide temperature tolerance, and protective casing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    6Shfl¿Fdwlrq: Industrial Ethernet Switch

    Uploaded by

    Alaa
    12 views2 pages
    This document provides specifications for an industrial Ethernet switch, including: - Support for Ethernet and Gigabit Ethernet standards, as well as network redundancy protocols like RSTP. - 10 ports, including 7 10/100TX ports and 3 combo ports that support 10/100/1000TX or fiber. - Management features like CLI, web interface, SNMP, port trunking, VLAN, QoS, and port security. - Rugged design with DIN rail or wall mounting, wide temperature tolerance, and protective casing.

    Original Title

    693813

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for an industrial Ethernet switch, including: - Support for Ethernet and Gigabit Ethernet standards, as well as network redundancy protocols like RSTP. - 10 ports, including 7 10/100TX ports and 3 combo ports that support 10/100/1000TX or fiber. - Management features like CLI, web interface, SNMP, port trunking, VLAN, QoS, and port security. - Rugged design with DIN rail or wall mounting, wide temperature tolerance, and protective casing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    12 views2 pages

    6Shfl¿Fdwlrq: Industrial Ethernet Switch

    Uploaded by

    Alaa
    This document provides specifications for an industrial Ethernet switch, including: - Support for Ethernet and Gigabit Ethernet standards, as well as network redundancy protocols like RSTP. - 10 ports, including 7 10/100TX ports and 3 combo ports that support 10/100/1000TX or fiber. - Management features like CLI, web interface, SNMP, port trunking, VLAN, QoS, and port security. - Rugged design with DIN rail or wall mounting, wide temperature tolerance, and protective casing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Industrial Ethernet Switch

    6SHFL¿FDWLRQ
    Technology Network Redundancy
    Standard: Rapid Spanning Tree Protocol: IEEE802.1D-2004 Rapid
    IEEE 802.3 10Base-T Ethernet Spanning Tree Protocol. Compatible with Legacy STP and
    IEEE 802.3u 100Base-TX Fast Ethernet IEEE802.1w.
    IEEE 802.3ab 1000Base-TX Rapid Super Ring(RSR): 2nd generation Korenix Ring
    IEEE 802.3z Gigabit Ethernet Fiber Redundancy Technology. Failure recovery within 5ms.
    IEEE 802.3x Flow Control and Back-pressure Dual Homing II: Multiple uplink paths to upper switches
    IEEE 802.1p class of service Multiple Ring: Couple or multiple Rapid Super Rings
    IEEE 802.1Q VLAN and GVRP Legacy Super Ring: Backward compatible in client mode
    IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP) Any Ring: Inter-operate with other vendors' ring
    IEEE802.3ad LACP Interface
    IEEE802.1X Port_based Network Access Control Number of Ports: 10/100TX: 7 x RJ-45, Auto MDI/MDI-X,
    Performance Auto Negotiation
    Switch Technology: 10/100/1000TX: 3 x RJ-45, combo with SFP
    Store and Forward Technology with 32Gbps Switch Fabric. Gigabit Fiber/100Base-FX: 3 x SFP with Hot Swappable
    System Throughput: 14,880pps for 10M Ethernet, Cables:
    148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit 10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable (100m)
    Ethernet 100 Base-TX: 2/4-pair UTP/STP Cat. 5 cable (100m)
    Transfer packet size: 64 bytes to 1522 bytes (with VLAN 1000 Base-T: 4-pair UTP/STP Cat. 5 cable (100m)
    Tag) Diagnostic LED:
    MAC Address: 8K MAC 10/100 RJ-45: Link/Activity(Green), Full duplex/Collision

    Industrial 7+3G Gigabit Managed Ethernet Switch


    JetNet 5010G
    Packet Buffer: 1Mbits (Yellow)
    Relay Alarm:Dry Relay output with 1A@24V ability Gigabit Copper/SFP: Link/Activity(Green)
    Management Unit: Power(Green), Digital Out(Red), Digital Input(Green),
    &RQ¿JXUDWLRQCisco-Like CLI, JetView, Web, HTTPS, R.M.(Green)
    66+7)73:HE8SGDWHIRU¿UPZDUHDQGFRQ¿JXUDWLRQ RS232 Console: RJ-45 Connector, Pin3: TxD, Pin6: RxD,
    backup/restore, DHCP Client, Warm reboot, Reset to Pin5:GND
    default, Admin password, Port Speed/Duplex control, status, Power: 2 sets of power Inputs
    statistic, MAC address table display, Static MAC, Aging Digital Input: 2 sets of Digital Input
    time, SNMP v1, v2c, v3, Traps and RMON1. Logic Low (0): 0-10VDC/Logic High(1): 11-30VDC
    SNMP MIB: MIB-II, Bridge MIB, VLAN MIB, SNMP MIB, Alarm: VHWVRI5HOD\RXWSXWVIRUSUHGH¿QHGHYHQWV
    RMON and Private MIB Reset: Reset button is provided to restore default settings
    Port Trunk: Up to 5 Static Trunk and 802.3ad LACP Power Requirements
    VLAN: IEEE802.1Q VLAN, GVRP. Up to 64 VLAN groups System Power: 12~48V/-12~-48VDC with Reverse Polarity
    Quality of Service: Four priority queues per port, Protection
    IEEE802.1p COS and Layer 3 TOS/DiffServ Power Consumption: 11.5 Watts @ DC 48V
    IGMP Snooping: IGMP Snooping V1/V2/V3 for multicast Mechanical
    ¿OWHULQJDQG,*034XHU\99 Installation: DIN-Rail mount or Wall Mount
    Rate Control:,QJUHVV¿OWHULQJIRU%URDGFDVW0XOWLFDVW, Case: IP-31 protection, aluminum metal case
    8QNQRZQ'$RU$OOSDFNHWVDQG(JUHVV¿OWHULQJIRU$OO Dimension: 137mm(H) x 96mm (W) x 119mm (D)
    packets Weight: 0.915kg with package
    NTP: Network Time Protocol to synchronize time from Environmental
    Internet Operating Temperature:-20 ~70 C O

    Embedded Watchdog: Embedded hardware watchdog Operating Humidity: 5% ~ 95% (non-condensing)


    timer to auto reset system when switch system failure Storage Temperature: -40 ~ 85 CO

    Port Mirroring: 2QOLQHWUDI¿FPRQLWRULQJRQPXOWLSOH Hi-Pot: 1.2KV for ports and power


    selected ports Regulatory Approvals
    Port Security:$VVLJQDXWKRUL]HG0$&WRVSHFL¿FSRUW EMI: FCC Class A, CE/EN55022. Class A
    IP Security: IP security to prevent unauthorized access EMS: EN61000-4-2, EN61000-4-3, EN61000-4-4,
    802.1x: Port_based Network Access Control EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11
    DHCP Server: Can assign 255 IP address, support IP and Safety: UL, cUL, EN60950
    MAC binding Shock: IEC60068-2-27
    E-mail Warning: $XWRPDWLFZDUQLQJE\SUHGH¿QHGHYHQWV Vibration: IEC60068-2-6
    System Log: Supports both Local mode and Server mode Free Fall: IEC60068-2-32
    MTBF:249,683 Hours, MIL-HDBK-217F GB standard
    Warranty: 5 years

    62
    Ordering Information
    JetNet 5010G Industrial 10-Port Managed Ethernet Switch
    Includes:
    JetNet 5010G(without SFP transceiver)
    Wall mounting plate
    Quick Installation Guide
    Documentation CD-ROM

    Optional Accessories
    O
    SFPGSX:1000Base-SX multi-mode SFP transceiver,550m, -10~70 C
    O
    SFPGSX-w:1000Base-SX multi-mode SFP transceiver,550m, wide operating temperature, -40~85 C
    O
    SFPGSX2:1000Base-SX plus multi-mode SFP transceiver,2Km, -10~70 C
    O
    SFPGSX2-w:1000Base-SX plus multi-mode SFP transceiver, 2Km,wide operating temperature, -40~85 C
    O
    SFPGLX10:1000Base-LX single-mode SFP transceiver 10Km, -10~70 C
    O
    Industrial 7+3G Gigabit Managed Ethernet Switch

    SFPGLX10-w:1000Base-LX single-mode SFP transceiver, 10Km, wide operating temperature, -40~85 C


    O
    SFPGLHX30:1000Base-LHX single-mode SFP transceiver,30Km, -10~70 C
    O
    SFPGLHX30-w:1000Base-LHX single-mode SFP transceiver, 30Km, wide operating temperature, -40~85 C
    O
    SFPGXD50:1000Base-XD single-mode SFP transceiver, 50Km, -10~70 C
    O
    SFPGXD50-w:1000Base-XD single-mode SFP transceiver, 50Km, wide operating temperature, -40~85 C
    O
    SFPGZX70:1000Base-ZX single-mode SFP transceiver, 70Km, -10~70 C
    O
    SFPGZX70-w:1000Base-ZX single-mode SFP transceiver, 70Km, wide operating temperature, -40~85 C
    JetNet 5010G

    63

    You might also like