RG-EST310 V2

5GHz Dual-stream
802.11ac Wireless Bridge
Ruijie Networks
 Product Overview
Ruijie Reyee Series RG-EST310 V2 is an 802.11ac wireless bridge for video surveillance backhaul or
remote wireless transmission in scenarios such as elevators, tower cranes, factories, campuses, and
construction sites. Operating at 5GHz, RG-EST310 V2 supports two spatial streams (2x2 MIMO
technology) and provides up to 867Mbps throughput, which can fully meet the data link bandwidth
requirements of various services.

RG-EST310 V2 consists of 2 devices, including the recorder-end and camera-end device. They are
paired by default and can be deployed without requiring any configurations. When used for video
surveillance backhaul, it is recommended to connect a switch or hard disk recorder to the recorder-end
and connect a network camera to the camera-end.

RG-EST310 V2 can be managed via the app, including viewing the network topology and
modifying configurations, which has completely revolutionized the conventional contact-type bridge
configuration method. Bridge maintenance no longer requires working at heights, reducing the difficulty of
maintaining bridges to an unprecedented level.

With the four-sided curved edges design, RG-EST310 V2 fully utilizes the compact size and
offers an exquisite exterior design. Straps are provided for easy equipment installation. The casing of
the device is optimized to deliver better dustproof and waterproof performance, providing IP65
protection. The weather-resistant materials enable the casing to stay robust for a long time under
harsh conditions such as exposure to the sun, wind, acid and alkali corrosion. Moreover, the wide
temperature range of the industrial materials adopted for the device fully guarantee the reliability
and durability of the device under various complex environments such as hot and humid weather,
dry and cold weather, sun exposure, rain, strong winds, etc. The device is capable of effectively
withstanding the impact of bad weather or harsh environments, offering high stability while significantly
reducing construction and installation difficulties.

The device is built-in with wireless product management software WSP-EST310. Users can view
all wireless bridge information and the topology by logging in to any bridge device.

Product Features

Zero Configuration

RG-EST310 V2 consists of 2 devices, including the recorder-end and camera-end device. They
are paired by default and can be used without requiring any configurations.

-2-
Easy Installation

Straps are provided for easy equipment installation to improve implementation efficiency.

Convenient Maintenance

RG-EST310 V2 can automatically adjust the channels and optimize the power based on the
operating environment, thereby reducing the maintenance workload caused by environmental
changes. The software and hardware self-healing design can effectively prevent system hang
and unexpected connection loss.
RG-EST310 V2 supports app management, which revolutionizes the conventional contact-type
bridge configuration mode. Bridge maintenance no longer requires working at heights, reducing the
difficulty of maintaining bridges to an unprecedented level.
The device is built-in with wireless product management software WSP-EST310. Users can view
all bridge information and the topology by logging in to any bridge device.

High Reliability

RG-EST310 V2 can provide dustproof and waterproof IP65 protection for outdoor environments
and operate in a wide temperature range from –30°C to 50°C. The high-quality weather-resistant
materials enable RG-EST310 V2 to maintain excellent structural strength without embrittlement,
yellowing, or deformation for long-term outdoor operation.

Excellent Performance

RG-EST310 V2 boasts high data transmission bandwidth, low latency, and load balancing,
delivering excellent performance even when it is connected to multiple surveillance channels
concurrently.

-3-
 Technical Specifications

Model RG-EST310 V2
Hardware Specifications
1 km recommended
Bridging Distance
64 MB/8 MB
RAM/Flash
802.11a/n/ac:
Operating Band 5.150～5 .350GHz, 5.470~5.725GHz , 5.725～5 .850GHz (country specific)
Directional antennas, 10 dBi
Antenna
Two Spatial Streams, 2x2 MIMO
Spatial Streams
5 GHz: 866 Mbps
Throughput
Transmit Power ≤400 mw
Antenna Angle
60°/30°
(Horizontal/Vertical)
Common Mode: ±4 KV, Differential Mode: ±2 KV
Lightning Protection
147 mm*76 mm*37 mm (Without bracket)
Dimensions (W x D x H)
Weight 0.35 kg
One 10/100Mbps Ethernet port
Service Port
Support
Reset
Support
Status LED
24 V Passive PoE
PoE
Local Power Supply Support
Not Support
External Power Supply
Internal Antenna (basic gain: 10 dBi)
Internal Antenna
<7 W
Working Power
Color Standard: Grey
Working Temperature: -30°C to 55°C
Storage Temperature: -40°C to 70°C
Environment
Working Humidity: 5% to 95% (non-condensing)
Storage Humidity: 5% to 95% (non-condensing)
MTBF >250000 H
Software Features
AP/CPE Switchover
LAN Settings
Hostname Settings
Basic Settings Password Settings
Country/Region Code Settings
Time Zone Settings
Clock Settings
Password Settings
Settings for All Devices IP Address Settings
SSID Settings

-4-
 Model RG-EST310 V2
Synchronizing configuration when the device is added.
After users edit settings on eWeb, Ruijie Cloud will receive the timestamp reported by the
Configuration device and trigger synchronization.
Synchronization A device goes online after settings are changed. The device will be synchronized with
configuration based on its timestamp.
Synchronizing configuration among Ruijie Cloud, eWeb and Ruijie Cloud App
Alarm Alarm
One-click optimization
Switching among multiple working modes (high-bandwidth/normal/anti-interference)
AP/CPE Switchover
WDS Settings
SSID, Channel and Power Settings
Bridging Status LED
Multi-VLAN Transparent Transmission
DNS DNS client
SSH
TFTP Client
SSH DHCP-Server
DHCP Client
Client
WIO (Ruijie Cloud) Auto channel adjustment
DFS Radar Signal Detection and Auto Frame Rate
Link Authentication
WLAN Encryption and Access Authentication
Security Security (WAP-PSK/WAP2-PSK/WPA-WAP2-PSK)
Key Agreement Protocol
WLAN QoS/WMM WMM

Antenna Pattern Plot

 Ordering Information
Model Description
5GHz wireless bridge, including 2 devices for the recorder-end and camera- end,
paired by default without requiring any configuration; up to 867Mbps throughput, built-in
RG-EST310 V2 directional antenna, support Web/ Real-easy app management; 12VDC and 24VDC
non-standard PoE; Wall-mounted/ Pole-
mounted installation

Camera Support Reference

3MP 4-5MP 6-7MP

Distance RSSI Throughput Port Speed
Model H.265 H.265 H.265
(Meters) (dBm) (Mbps) (Mbps)
(Units) (Units) (Units)

100 -52 400 90 16 10 7

500 -65 400 80 16 10 7

RG-EST310 V2
1000 -68 240 80 16 10 7
RG-EST310

2000 -75 120 40 6 4 3

-5-
Ruijie Networks Co., Ltd.
Technical Support: http://bbs.ruijiery.com Technical
Service Center: +86-400-100-0078 (China) Web:
www.reyee.cc www.ruijiery.com