Scribd Logo
Upload

Welcome to Scribd!

  • 13 views

    Smart Switch Modelo DS 3e1326p Si Hikvision

    Uploaded by

    davidweyland446

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Smart Switch Modelo DS 3e1326p Si Hikvision

    Uploaded by

    davidweyland446
    13 views6 pages

    Original Title

    SMART SWITCH MODELO DS 3E1326P SI HIKVISION

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    13 views6 pages

    Smart Switch Modelo DS 3e1326p Si Hikvision

    Uploaded by

    davidweyland446

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    DS-3E1326P-SI

    Smart Managed 24-Port 100 Mbps PoE Switch

    Smart managed switches are developed by Hikvision, featuring easy management and maintenance. You can easily deploy,
    monitor and expand your surveillance system anytime and anywhere with our software platforms. You can view the network
    topology, monitor the health of the network and receive device alarms in real time, which greatly reduces the cost of
    network operation and maintenance.

     24 × 100 Mbps PoE RJ45 port, 2 × gigabit combo.


     IEEE 802.3at/af standard for PoE ports.
     Network topology management, alarm push, network health monitor.
     6 kV surge protection for PoE ports.
     AF/AT camera can reach up to 300 m in extend mode.

    Specification
    General
    Shell Metal material
    Net Weight 2.83 kg (6.24 lb)
    Gross Weight 3.33 kg (7.34 lb)
    Dimensions (W × H × D) 440.00 mm × 44.00 mm × 221.00 mm (17.32'' × 1.73'' × 8.70'')
    Operating Temperature 0 °C to 45 °C (0 °F to 113 °F)
    Storage Temperature -40 °C to 85 °C (-40 °F to 185 °F)
    Operating Humidity 5% to 95% (no condensation)
    Relative Humidity 5% to 95% (no condensation)
    Power Supply 100~240 V AC, 50/60 Hz, Max. 6.5 A
    Installation Mode Rack (equipped with mounting ears)
    Max. Power Consumption 400 W
    Power Consumption in Idle 10 W
    Surge Protection 6 kV
    Network Parameters
    Ports 24 × 10/100 Mbps PoE port,2 × Gigabit combo
    MAC Address Table 16 K
    Switching Capacity 14.8 Gbps
    Packet Forwarding Rate 11.01 Mpps
    Internal Cache 4 Mbits
    PoE Power Supply
    PoE Standard IEEE 802.3af,IEEE 802.3at
    PoE Power Pin 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-);
    PoE Port PoE: Ports 1 to 24
    Max. Port Power 30 W
    PoE Power Budget 370 W
    Software Function
    Ports 1 to 24: up to 300 m.
    Long Range
    Long range performance may vary depend on camera model or cable condition.
    Ports 1 to 24: port isolation mode to improve network security.
    Port Isolation Ports in an isolation group cannot communicate with each other, but they can
    communicate with ports outside the isolation group.
    PoE Watchdog Ports 1 to 24: auto detect and restart the cameras that do not respond.
    QoS is used to allocate bandwidth to different services so as to provide end-to-end
    service quality assurance.
    QoS
    Support port-based priority configuration.
    Support SP, WRR priority schedule mode.
    Loop prevention is used to prevent the switching network from forming loops, which
    will seriously affect network communication. Disabled by default.
    Loop Prevention
    Support 802.1D STP.
    Suppport 802.1w RSTP.
    VLAN is used for network scale planning and network health improvement.
    Support 802.1Q.
    VLAN Configurable VLAN ID from 1-4094.
    Support Trunk, Access port mode.
    Support Max. 4094 VLAN.
    Support one-click activation and remote management via Hik-Partner Pro. Functions
    supported:
    1. Display the port rate.
    2. Display the port bandwidth utilization rate.
    HPP
    3. Display topology information.
    4. Display the alarm status.
    5. Restart ports and devices.
    6. Remotely upgrade the device.
    Remote upgrade, default parameters recovery, logs viewing, basic network
    System Maintenance
    parameters configuration, import and export configuration, time sync
    Port rate-limiting is used for port bandwidth adjustment to prevent network
    Port Rate-Limiting
    congestion.
    Storm control is used to prevent switch ports from being blocked by broadcast or
    multicast storms in the LAN, which may affect network communication.
    Storm Control
    Support port rate limiting based on broadcast, multicast, and unknown unicast
    packets.
    Approval
    FCC (47 CFR Part 15, Subpart B);
    CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN
    EMC 50130-4: 2011 +A1: 2014, EN 55035: 2017);
    IC (ICES-003: Issue 6);
    RCM (ASNZS CISPR 32: 2015)
    UL (UL 60950-1);
    CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second
    Safety Edition);
    CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1:
    2014+A11: 2017)
    CE-RoHS (201165EU);
    Chemistry WEEE (201219EU);
    Reach (Regulation (EC) No.19072006)

    Typical Application


    Physical Interface
    Front Panel

    Rear Panel


    Available Model
    DS-3E1326P-SI
    DS-3E1326P-SI V2

    Dimension (Unit: mm)

    Accessory
     Optional
    HK-SFP-1.25G-1310-DF- HK-SFP-1.25G-20-1310-
    HK-SFP-1.25G-20-1550 HK-SFP-1.25G-20-1310
    MM DF
    SFP Module SFP Module
    SFP Module SFP Module

    You might also like