Mercedes Benz Actros, Atego, Axor Truck Fault Codes List Part 4
Mercedes Benz Actros, Atego, Axor Truck Fault Codes List Part 4
Mercedes Benz Actros, Atego, Axor Truck Fault Codes List Part 4
https://truck-manuals.jimdo.com/mercedes-truck-fault-codes/mercedes-truck-fault-codes-4/
0101 Sensor supply "filling pressure in the circuit 1 'has a short to ground
0102 Sensor supply "filling pressure in the circuit 1 'has a short circuit to positive
0104 Sensor input signal "pressure filling circuit 1 'does not reach the measuring area
0105 Sensor input signal "pressure filling in the loop 1" is greater than the measurement area
0201 Power Sensor "Filling pressure in circuit 2" is a short to ground
0202 Power Sensor "Filling pressure in circuit 2" has short to positive
0204 Sensor input signal "Filling pressure in circuit 2" does not reach the measuring area
0205 Sensor input signal "pressure filling of circuit 2" is greater than the measurement area
0301 cab locking system has a short circuit to ground
0308 cab locking system is an open or short to positive
0508 Fuel level sensor in the fuel tank is open or short circuit to positive
0607 Input Terminal W is shorted to ground or open
By 0901 cable has a short circuit to ground
By 0902 cable is open or short circuit to positive
1020 CAN vehicle bus fault
1101 Digital input H1.18 / 12 invalid
OR
Digital input status H1.18 / 1 "Front interaxle lock" unreliable
1102 Digital input H1.18 / 11 invalid
OR
Digital input status H1.18 / 2 "differential lock 1.Peredney axis" unreliable
1103 Digital input H1.18 / 10 invalid
OR
Digital input status H1.18 / 3 "reserve funds washer" unreliable
1104 Digital input H3.18 / 11 invalid
OR
Digital input status H1.18 / 4 "axle differential lock 1.Zadney" unreliable
1105 Status of digital input H1.18 / 5 "differential lock 2.Peredney axis" unreliable
1106 Status of digital input H1.18 / 6 "Locking the driver's cab on the left" unreliable
1107 Status of digital input H1.18 / 7 «Differential lock 2.Zadney axis" unreliable
1108 Status of digital input H1.18 / 8 "rear interaxle lock" unreliable
1109 Digital input H1.18 / 9 invalid
OR
Digital input status H1.18 / 9 "Locking the driver's cab on the right" unreliable
1110 Digital input H1.18 / 10 invalid
1111 Status of digital input H1.18 / 11 "PTO" unreliable
1112 Digital input H1.18 / 12 invalid
1113 Status of digital input H1.18 / 13 "Control lamps" unreliable
1114 Status of digital input H1.18 / 14 "oil level in the steering mechanism" unreliable
1115 Status of digital input H1.18 / 15 "trailer ABS fault" unreliable
1116 Status of digital input H2.18 / 9 "Contact us at the door" unreliable
1117 Status of digital input H3.18 / 11 "Steering with hydrostrengthening" unreliable
1118 Status of digital input H3.18 / 12 "The pressure in the circuit filling 4" unreliable
1119 Status inlet H3.18 / 13 "Terminal 58" unreliable
1120 Status of digital input H3.18 / 14 "Reserve" unreliable
1121 Status of digital input H3.18 / 16 "The pressure in the filling circuit 3" unreliable
1122 Status button "Back Zuruck» unreliable
1123 The state of "Down Auf» button unreliable
1124 Status button "Up Ab» unreliable
1125 Status button "Selection Auswahl» unreliable
1126 Status button "Reset Reset» unreliable
1127 Status button "Plus Plus» unreliable
1128 Status button "Minus Minus» unreliable
1129 Condition "Set Set» button unreliable
1130 Status "Select Select» button unreliable
1131 Status of digital input H2.18 / 5 "Terminal 15" unreliable
1220 Failure of the connections between the module and the K-module n-
1321 Error in parameterization of K-module
1332 K-module is faulty
1333 K-module is faulty
1421 parameterization error in the control unit
OR
Parameterization error in the n-module
1432 Internal error in the control unit
OR
n-module is faulty
1520 CAN bus to the tachograph is faulty
OR
V-signal from the control unit FR offline
1903 Terminal 15 is open
1941 Overvoltage
OR
Over voltage at terminal 15
1942 Undervoltage at terminal 15
2001 Communication on the exchange of data with the address control unit 1 is broken
2002 Communication on the exchange of data with the control unit FR broken
2003 Communication on the exchange of data with the at 3 control unit is broken
2004 Communication on the exchange of data with the address control unit 4 is broken
2005 Communication on the exchange of data with the SPA control unit is broken
2006 Communication on the exchange of data with the PFA unit is broken
2007 Communication on the exchange of data with the FLA control unit is broken
2008 Communication on the exchange of data with KS control unit is broken
2009 Communication on the exchange of data with the GS control unit is broken
2010 Communication on the exchange of data with the address 10, the control unit is broken
2011 Communication on the exchange of data with the SIR control unit is broken
2012 Communication on the exchange of data with SIL control unit is broken
2013 Communication on the exchange of data with the control unit WSK broken
2014 Communication on the exchange of data with the ABS control unit is broken
2015 Communication on the exchange of data with the RS control unit is broken
2016 Communication on the exchange of data with the address 16, the control unit is broken
2017 Communication on the exchange of data with the control unit NR broken
2018 Communication on the exchange of data with the FFB control unit is broken
2019 Communication on the exchange of data with a ZV or KSA control unit is broken
2020 Communication on the exchange of data with the EKL control unit is broken
2021 Communication on the exchange of data with the address 21, the control unit is broken
2022 Communication on the exchange of data with the address 22, the control unit is broken
2023 Communication on the exchange of data with the address 23, the control unit is broken
2024 Communication on the exchange of data with the WS control unit is broken
2025 Communication on the exchange of data with the address 25, the control unit is broken
2026 Communication on the exchange of data with the KOM control unit is broken
2027 Communication on the exchange of data with the address 27, the control unit is broken
2028 Communication on the exchange of data with the control unit is broken HZR
2029 Communication on the ZHE data exchange with the control unit is broken
2030 Communication on the exchange of data with the address 30, the control unit is broken
2031 Communication on the exchange of data with the HPS control unit is broken
2032 Communication on the exchange of data with the address control unit 32 is broken
2033 Communication on the exchange of data with the address 33 control unit is broken
2034 Communication on the exchange of data with the address 34 of the control unit is broken
2035 Communication on the exchange of data with the address 35 control unit is broken
2036 Communication on the exchange of data with the BS control unit is broken
2037 Communication on the exchange of data with the address 37 control unit is broken
2038 Communication on the exchange of data with the control unit AGE broken
2039 Communication on the exchange of data with the address 39 of the control unit is broken
2040 Communication on the exchange of data with the MR control unit is broken
2041 Communication on the exchange of data with the address 41 of the control unit is broken
2042 Communication on the exchange of data with the SRS control unit is broken
2043 Communication on the exchange of data with the address 43 control unit is broken
2044 Communication on the exchange of data with the EDW control unit is broken
2045 Communication on the exchange of data with the address control unit 45 is broken
2046 Communication on the exchange of data with PSM control unit is broken
2047 Communication on the exchange of data with the control unit SRB broken
2048 Communication on the exchange of data with the address 48 control unit is broken
2049 Communication on the exchange of data with the control unit is broken ART
OR
Communication on the exchange of data with the address 49 control unit is broken
2050-2099 Communication on the exchange of data with the addresses by the control unit from 50 to 99
broken
2100 Communication on the exchange of data with the control unit AGE broken
2101-2104 Communication on the exchange of data with the addresses of the control unit 101 to 104 is broken
2105 Communication on the exchange of data with the ANH control unit is broken
2106-2109 Communication on the exchange of data with the addresses of the control unit 106 to 109 is broken
2110 Communication on the exchange of data with the AUF control unit is broken
2111-2199 Communication on the exchange of data with the addresses of the control unit 111 to 199 is broken
2515 Nor any text data is not put in the toolbar
3001 control unit at 1 defective
3002 FR control unit defective
3003 control unit at 3 defective
3004 control unit at 4 defective
SPA 3005 control unit defective
OR
The control unit 5 at defective
3006 PFA control unit defective
3007 Block FLA control defective
3008 GS Control unit defective
OR
KS control unit defective
3009 GS Control unit defective
3010 control unit at 10 defective
3011 SIR control unit defective
SIL 3012 control unit defective
3013 Block WSK control defective
3014 ABS control unit defective
3015 RS control unit defective
3016 to the address control unit 16 is not working properly
3017 NR control unit defective
3018 block FFB control defective
3018 block ZV control or defective KSA
3020 Block EKL control defective
3021-3023 at the address control unit from 21 to 23 is not working properly
3024 WS control unit defective
3025 control unit at 25 defective
3026 Block KOM control defective
3027 to the address control unit 27 is not working properly
3028 Block HZR control defective
3029 Block ZHE control defective
3030 control unit at 30 defective
3031 Block HPS control defective
3032-3035 at the address control unit from 32 to 35 is not working properly
BS 3036 control unit defective
3037 control unit at 37 defective
3038 block AGE control defective
3039 to the address control unit 39 is not working properly
3040 MR control unit defective
3041 to the address control unit 41 is not working properly
3042 SRS control unit defective
3043 to the address control unit 43 is not working properly
EDW 3044 control unit defective
3045 control unit at 45 defective
3046 PSM control unit defective
3047 Block SRB control defective
3048 at 48 control unit defective
3049 ART control unit defective
OR
The control unit at 49 defective
3050-3099 at the address control unit from 50 to 99 is not working properly
3100 EAB control unit defective
MERCEDES TRUCK LIST OF SPECIAL MODULE CONTROL UNIT FAULT CODES WITH
PARAMETER SETTING (PSM) 2
4521 Output signal Contact X4 18/14 has short to positive or open circuit
4541 Digital input 5 has a short to ground
4542 Digital input 5 has short to positive
4620 Output signal Contact X4 18/15 has a short to ground
4621 Output signal Contact X4 18/15 has short to positive or open circuit
4641 Digital input 6 has a short to ground
4642 Digital input 6 has short to positive
4720 Output signal Contact X4 18/16 has a short to ground
4721 Output signal Contact X4 18/16 has short to positive or open circuit
4820 Output signal Contact X4 18/17 has a short to ground
4821 Output signal Contact X4 18/17 has short to positive or open circuit
4920 Output signal Contact X4 18/18 has a short to ground
4921 Output signal Contact X4 18/18 has short to positive or open circuit
5020 Output "engine speed signal" (Contact X1 18/4) has a short to
weight
5021 Output "engine speed signal" (Contact X1 18/4) has a short to
plus or breakage
5080 Protective function for the power take-off are bridged by hand
5120 Output "Speed Signal" (Contact X1 18/5) has a short circuit to ground
5121 Output "Speed Signal" (Contact X1 18/5) has a short circuit to positive or open circuit
5220 Output "signal a predetermined parameter of the engine torque" (Contact X1 18/6) has a short
short to ground
5221 Output "signal a predetermined parameter of the engine torque" (Contact X1 18/6) has a short
circuit to positive or open circuit
5320 Output signal "Signal load limit" (Contact X1 18/7) has a short circuit to ground
5321 Output signal "Signal load limit" (Contact X1 18/7) has a short circuit to positive or
breakage
5420 Output "signal PWM 1" (Contact X1 18/8) has a short circuit to ground
5421 output of the «PWM 1 signal" (Contact X1 18/8) has a short circuit to positive or open circuit
5520 output of the «PWM 2 Signal" (Contact X1 18/9) has a short circuit to ground
5521 output of the «PWM signal 2" (Contact X1 18/9) has a short circuit to positive or open circuit
6040 hand-held gas sensor input signal (Pin X1 18/11) has a short circuit to positive or open circuit
6041 hand-held gas sensor input signal (Pin X1 18/11) has a short circuit to ground
6042 hand-held gas sensor power cable (Contact X1 18/10) has a short circuit to ground
6043 hand-held gas sensor power cable (Contact X1 18/10) has a short circuit to positive
6140 Input "Starting the motor" (18/7 Contact X2) has a short circuit to ground
6141 Input "Starting the motor" (18/7 Contact X2) has a short circuit to positive
6240 Input "Engine Stop" (18/8 Contact X2) has a short circuit to ground
6241 Input "Engine Stop" (18/8 Contact X2) has a short circuit to positive
6340 Input Signal "Lock start" (18/9 Contact X2) has a short circuit to ground
6341 Input "immobilizer" (18/9 Contact X2) has a short circuit to positive
6440 Input "Switch steps" (Contact 18/13 X2) has a short circuit to ground
6441 Input "Switch steps" (Contact 18/13 X2) has a short circuit to positive
6540 Input "Remote clutch control" (Contact X4 18/4) has a short to
weight
6541 Input "Remote clutch control" (Contact X4 18/4) has a short to
a plus
6640 Input "Interference with ABS» (Contact X4 18/4) has a short circuit to ground
6641 Input "Interference with ABS» (Contact X4 18/4) has a short circuit to positive
6740 Input Signal "Survey rear input gear" (Contact X4 18/4) has a short circuit to ground
6741 Input Signal "Survey rear input gear" (Contact X4 18/4) has a short circuit to positive
6840 Input "transfer switch to the neutral position" (Contact X4 18/4) has a short
short to ground
6841 Input "transfer switch to the neutral position" (Contact X4 18/4) has a short
circuit to positive
6940 Input "State retarder" (Contact X4 18/5) has a short circuit to ground
6941 Input "State retarder" (Contact X4 18/5) has a short circuit to positive
7040 Input "parking brake" (Contact X4 18/5) has a short circuit to ground
7041 Input "parking brake" (Contact X4 18/5) has a short circuit to positive
8080 Protective function for the power take-off are bridged by hand.