Yealink Skype For Business Edition HD IP Phones Description of Configuration Parameters in CFG Files V8.50

Auto Provision Configuration files
Version
V8.50
V8.21
Auto Provision Configuration files
Summary of Changes
1. Add the following paramters:

voice.headset_send
voice.handset_send
voice.handfree_send
sip.srtp_take_mki.enable
sip.btoe.transport_sercure.enable
sip.btoe.pairing_mode
sfb.music_on_hold.enable
setting.search_original_number.enable
setting.contacts_name_from_address.enable
redirect.enable
phone_setting.voicemail.update_time
phone_setting.username_scroll_display
phone_setting.server_skype_search.enable
phone_setting.search_outlook_contacts.return_number
phone_setting.search_ad_contacts.return_number
phone_setting.reserve_certs_enable
phone_setting.private_line_ring_type
phone_setting.private_line_ring.enable
phone_setting.outlook_contacts.update_time
phone_setting.line_key_led.enable
phone_setting.hold_and_held_power_led_flash_enable
phone_setting.exp40_led.enable
phone_setting.directory_search.display_number
phone_setting.call_log.update_time
phone_setting.calendar.update_time
network.attempt_expired_time
ldap.search.enable
forward.international.enable
features.user_sign_in.enable
features.sign_in_via_btoe.enable
features.responese_group_history.enable
features.remember_password.enable
features.redial_action.type
features.pin_authentication.enable
1. Add newly released T46G, T42G, T41P, T40P Skype for Business phones.
And T22/T22P Skype for Business phones are removed from version 8.
2. Add the following paramters:

wui_lang.url
wui_lang.delete
sip.lync_check_sn.enable
sip.lync_automation.enable
sip.ice_syslog.enable
sip.ice.network_traversal_type
sip.auto_discover_get_lync_server.enable
sfb.update_time
sfb.search_delay_time
sfb.presence.inactive_time
sfb.presence.away_time
sfb.pre_dial_tone.enable
sfb.phone_lock.enable
sfb.local_favorite.sort
sfb.local_favorite.enable
sfb.calendar.enable
sfb.always_online.enable
sfb.account_lock.enable
sfb.E911_location_tip
local_time.manual_ntp_srv_prior
local_contact.data.url
features.voice_mail_tone_enable
features.local_ringback_tone_time=
features.custom_factory_config.enable
features.action_uri_limit_ip
dialplan_dialnow.url
custom_factory_configuration.url
account.1.phone_lock.pin
multicast.codec
multicast.listen_address.X.ip_address
multicast.listen_address.X.label
Date
Oct. 2016
May. 2016
NO.
1
Description
If you want to reset the configuration of a parameter, set the value of the parameter to !NULL! or %NULL%. For example, local_t
%NULL%. After the auto provisioning process is completed, the NTP server 1 will be reset to cn.pool.ntp.org.
Description of Configuratio
Y: All Skype for Business phones support N: All Skype for Business phones donot support Y(): Only Skype for Business ph
The name of the Common CFG file for each model is shown below:
T48G: y000000000035.cfg T46G: y000000000028.cfg T42G: y000000000029.cfg T41P: y000000000036.cfg
T48G/T46G/T42G/ Permitted
Function Parameter
T41P/T40P Value
String within 128

account.sign_in.server_address Y
characters
String within 128

account.sign_in.user_name Y
characters
String within 128

Account account.sign_in.password Y
characters
String within 99
account.sign_in.pin_number Y
characters
String within 99
account.sign_in.pin_password Y For characters
T48G/T46G/T42G
/T4 IP phones:
G722, PCMA,
PCMU, G729,
account.1.codec.Y.enable Y 0 or 1
G726-16, G726-24,
G726-32, G726-40,
iLBC, G723_53,
G723_63
account.1.codec.Y.payload_type Y For T40P IP
phones:
Audio Codec G722, PCMA,
(Y ranges from 1 to 11) PCMU, G729,
G726-16, G726-24,
Integer from 0 to
account.1.codec.Y.priority Y
G726-32,11 G726-40,
iLBC
Integer
account.1.codec.Y.rtpmap Y from 0 to 127
account.1.auto_answer Y 0 or 1
account.1.missed_calllog Y 0 or 1
Advanced
account.1.voice_mail.skin_pin.enable Y 0 or 1
Advanced
Common,
Ring1.wav,
Ring2.wav,
Ring3.wav,
Ring4.wav,
Ring5.wav,
Ring6.wav,
account.1.ringtone.ring_type Y
Ring7.wav,
Ring8.wav,
Silent.wav,
Splash.wav,
ICE account.1.ice.candidate_type Y or custom ring
0,1,2,3,4,5,6
tone name (e.g.,
Customring.wav)
local_time.time_zone Y -11 to +14
String within 32
local_time.time_zone_name Y
characters
IP address or
local_time.ntp_server1 Y
domain name
IP address or
local_time.ntp_server2 Y
domain name
Integer from 15 to
local_time.interval Y
86400
local_time.summer_time Y 0, 1 or 2
local_time.dst_time_type Y 0 or 1
local_time.start_time Y Time
Time
local_time.end_time Y Time
Integer from -300

local_time.offset_time Y
to 300
local_time.time_format Y 0 or 1
local_time.date_format Y 0, 1, 2, 3, 4, 5 or 6
local_time.dhcp_time Y 0 or 1
local_time.manual_time_enable Y 0 or 1
local_time.manual_ntp_srv_prior Y 0 or 1
URL within 511

auto_dst.url Y
characters
IP Mode network.ip_address_mode Y 0, 1 or 2
Integer from 0 to
network.ipv6_prefix Y
128
network.ipv6_internet_port.type Y 0 or 1
network.ipv6_internet_port.ip Y IPv6 address
IPv6 network.ipv6_internet_port.gateway Y IPv6 address
network.ipv6_primary_dns Y IPv6 address
network.ipv6_secondary_dns Y IPv6 address
network.ipv6_icmp_v6.enable Y(T48G/T46G) 0 or 1
network.internet_port.type Y 0, 1 or 2
network.internet_port.ip Y IPv4 address
network.internet_port.mask Y Subnet Mask
IPv4
network.internet_port.gateway Y IPv4 address
network.primary_dns Y IPv4 address
network.secondary_dns Y IPv4 address

Inband Proversion account.1.auth_method Y 0, 1, 2, 4 or 8
of Configuration Parameters in MAC-Oriented.cfg File
): Only Skype for Business phones in bracket support N(): Skype for Business phones in bracket donot support
: y000000000036.cfg T40P: y000000000054.cfg
Default Value Description Reboot

It configures the sign-in address for the User Sign-
in method.
The value format is [email protected].
Blank Example: N
For T40P IP phones: It configures the user name for the User Sign-in
account.sign_in.server_address =
When Y=1, the default method.
[email protected]
value is 1; The value format is [email protected] or
When Y=2, the default username@domain, domain.com\username or
value is 1;Blank domain\username. N
For T40P IP phones:
When Y=3, the default
When Y=1, the default Example:
value is 1;
value is PCMU; account.sign_in.user_name= [email protected]
When Y=4, the default It onfigures the password for the User Sign-in
value is 1;Blank method. N
value is PCMA;
When
For Y=5,IP
T40P the default
phones:
value is
When 0; the default
Y=1,
value is G729;
When is
value Y=6,
2; the default
value is
When 0; the default
Y=2, It configures the IP phones extension for the PIN
value is G722;
When is
value 3;Blank
Y=7, the default
Authentication method.
N
When
For Y=5,
T40P the default
value
When is 0; IP
Y=3,
phones::
the default
value is
When iLBC;
Y=1, the default
When is
value Y=8,
4; the default
When
value Y=6,
is 0; the default
value is
When 0; the default
Y=4,
value is
When G726-16;
Y=2, the
When is
value Y=9, the default
1;Blank default It configures the PIN for the PIN Authentication
When
value Y=7,
is 8; the default N
value is 0.
When Y=5, the default method.
value is
When G726-24;
Y=3, the default
value is 0;
When is
value Y=8,
18; the default
For
When Y=6, the default It enables or disables the specified codec for
value is
When G726-32;
Y=4, the default
T48G/T46G/T42G/T41P
value is 0; account 1.
When is
value Y=9,
9; the default
IP phones:
When Y=7, the default N
value is
When G726-40.
Y=5, the default
When is
value Y=1,
0; the default 0-Disabled
value
value is
is 106;
1;
For Y=6, the default
When It configures the codec for account 1.
When is
value Y=2,
0; the default 1-Enabled
T48G/T46G/T42G/T41P
value is 103;
value
When is 1; the default
Y=9,
:
When Y=7, the default Example: N
When is
value Y=3,
0. the default Example:
When is
value is 104;
0; account.1.codec.1.payload_type = PCMU
account.1.codec.1.enable = 1
value is
When PCMU; default
When Y=8,
For Y=4, the
the default means thatthe
It configures thepriority
codec PCMU
of the is enabled
enabled on the
codec for
When is
value is 102;
0;
T48G/T46G/T42G/T41P account 1.
value is
When PCMA; default
Y=9,
When
IP Y=5, the
phones: the default N
When is
value Y=3,
105.the default
value is
When 1; the default
Y=1, Example:
value is G723_53;
When is
value Y=6,
2; the default account.1.codec.1.priority = 2
For It configures the rtpmap of the audio codec for
value is
When 1; the default
Y=2,
value is G723_63;
T48G/T46G/T42G/T41P account 1.
When is
value Y=7,
3; the default
:When Y=5, the default
value is 0; the default N
When Y=3,
value
When is G729;
Y=1, the default Example:
When is
value Y=8,
0; the default
When is
value Y=6,
0; the default account.1.codec.1.rtpmap = 0
value is
When 0; the default
Y=4,
value
When is G722;
Y=2, the default It enables or disables the auto answer feature for
When is
value Y=9,
0; the default
When is
value Y=7,
8; the default account 1.
value is
When 0; the
Y=5, 0 default N
value
When is iLBC;
Y=3, the default
When is
value Y=10,
4; the default
When is
value Y=8,
4; the default 0-Disabled
value is
When 0; the default
Y=6,
value
When is G726-16;
Y=4, the default
When
value is 1; the default
Y=11, It enables or disables the IP phone to indicate and
When is
value Y=9,
4; the default 1-Enabled
value is
When 0; the default
Y=7, record missed calls for account 1.
value is
When G726-24;
Y=5, the default
value is 0; 1 If it is set to 1 (Enabled), the IP phone can
N
When is
value Y=10,
18; the default
When Y=8, the default 0-Disabled
value is
When G726-32;
Y=6, the default automatically answer an incoming call.
value is 0;
When is
value Y=11,
9; the default It enables or disables the IP phone to access voice
When Y=9, the default 1-Enabled
value is
When G726-40;
Y=7, the default Note:
mail boxThe IP phone
without cannotPIN.
entering automatically answer
value is 0; 0 the incoming call during a call even if auto answer N
value is 106; If it is set to 0 (Disabled), the IP phone does not
When Y=10, the default is enabled.
When Y=8, the default 0-Disabled
value is 0; display indicator on the idle screen and log the
value is 103; missed call in the Missed Calls list when missed
When Y=9, the default 1-Enabled
value is 0; calls.
value is 104;
When Y=10, the default If it is set to 1 (Enabled), the IP phone displays a
value is 102; message on the idle screen and logs the missed
When Y=11, the default call in the Missed Calls list when missed calls.
value is 105;
It configures the type of the ICE (Interactive
Connectivity Establishment) feature for the IP
phones.
It configures a ring tone for account 1.
0-all
Common Example: N
account.1.ringtone.ring_type = Ring3.wav
1-host
It means configuring Ring3.wav for account1.
2-srflx
0 account.1.ringtone.ring_type = Common N
It means account1 will use the ring tone selected
3-udp-turn
for the IP phone configured by the parameter
"phone_setting.ring_type".
It configures the time zone.
4-tcp-turn
+8 Example: N
5-host+udp turn
local_time.time_zone = +8
6-host-tcp
It configures the time zone name.
For more available time zones, refer to Time Zones
The available time zone names depend on the time
China(Beijing) sheet. N
zone configured by the parameter
local_time.time_zone.
For more information on the available time zone
It configures the IP address or domain name of the
names for each time zone, refer to Time Zones
NTP server 1.
cn.pool.ntp.org sheet. N
Example:
Example:
local_time.ntp_server1 = 192.168.0.5
local_time.time_zone_name
It configures the IP address or = domain
China(Beijing)
name of the
NTP server 2. If the NTP server 1 is not configured
cn.pool.ntp.org Note:
or It works
cannot only if the
be accessed, value
the of thewill
IP phone parameter
request N
local_time.summer_time
the time and date from the is setserver
NTP to 2 (Automatic)
2.
and the parameter local_time.time_zone should
It
beconfigures
configuredthe interval (in seconds) to update
in advance.
Example:
time and date from the NTP server.
1000 local_time.ntp_server2 = 192.168.0.6 N
Example:
local_time.interval = 1000
It configures the Daylight Saving Time (DST)
feature.
2 N
0-Disabled
It configures the DST time type.
1-Enabled
0 0-DST by Date N
2-Automatic
1-DST by Week
It configures the start time of the DST.
1/1/0 Note: It works only if the value of the parameter N
Value formats are:
local_time.summer_time is set to 1 (Enabled).
Month/Day/Hour (for DST by Date)
Month/Week of Month/Day of Week/Hour of Day
It configures the end time of the DST.
(for DST by Week)
12/31/23 Value formats are: N
If local_time.dst_time_type is set to 0 (DST by
Month/Day/Hour (for DST by Date)
Date), use the mapping:
Month/Week of Month/Day of Week/Hour of Day
Month:
It configures1=January, 2=February,,
the offset time (in minutes)12=December
of DST.
(for DST by Week)
Day: 1=the first day in a month,, 31= the last
Blank day in a
Note: It month
works only if the value of the parameter N
If local_time.dst_time_type is set to 0 (DST by
Hour: 0=0am, 1=1am,, 23=11pm
Date), use the mapping:
Month:
It configures1=January,
the time2=February,,
format. is set to 12=December
If local_time.dst_time_type 1 (DST by
Day: 1=the first day in a month,, 31= the last
1 Week), use the mapping: N
day in a12
0-Hour month
Month: 1=January, 2=February,, 12=December
Hour: 0=0am, 1=1am,, 23=11pm
Week of Month: 1=the first week in a month,,
1-Hour
5=the 24 week in a month
last
It configures the date format. is set to 1 (DST by
If local_time.dst_time_type
Day of Week: 1=Monday, 2=Tuesday,,
0 Week),
If use
it is set tothe mapping:
0 (Hour 12), the time will be displayed N
7=Sunday
0-WWW MMM DD
Month:
in 1=January, 2=February,, 12=December
Hour of Day: 0=0am, AM
12-hour format with or PM specified.
1=1am,, 23=11pm
Week of Month: 1=the first week in a month,,
1-DD-MMM-YY
5=the lasttoweek in a month
If
It it is set
enables
Note: or1disables
It works (Hour
only if24),
thethe
the IP time
of will
phone
value be displayed
to update
the time
parameter
Day
in
with of Week:
24-hour
the format
offset 1=Monday,
time(e.g., 2:00
offered 2=Tuesday,,
PM displays as 14:00).
0 local_time.summer_time
2-YYYY-MM-DD isby the
set toDHCP server.
1 (Enabled). N
7=Sunday
Hour of Day: 0=1am, 1=1am,, 23=11pm
0-Disabled
3-DD/MM/YYYY
It enables
Note: or disables
It works only if the
the IP phone
value to obtain
of the time
parameter
1-Enabled
4-MM/DD/YY
and date from manual settings.
0 N
Note: It is only available to offset time from GMT
5-DD MMM (obtain
0-Disabled YYYY time and date from NTP server)
0.
6-WWW DD(obtain
1-Enabled MMM time and date from manual
settings)
Note: WWW represents the abbreviation of the
week, DD represents a two-digit day, MMM
represents the first three letters of the month,
YYYY represents a four-digit year, and YY
It configures the priority for the IP phone to use the
NTP server address offered by the DHCP server.
0 N
0-High (use the NTP server address offered by
DHCP preferentially)
It configures the access URL of the DST file
(AutoDST.xml).
Blank 1-Low (use the NTP server address configured N
manually preferentially)
Example:
auto_dst.url = tftp://192.168.1.100/AutoDST.xml
It configures the IP address mode.
0 Note: It works only if the value of the parameter Y
0-IPv4
"local_time.summer_time" is set to 2 (Automatic).
1-IPv6
It configures the IPv6 prefix.
64 2-IPv4 & IPv6 Y
Note: It works only if the value of the parameter
network.ip_address_mode is set to 1 (IPv6) or 2
(IPv4 & IPv6), and
It configures the Internet (WAN) port type for IPv6.
"network.ipv6_internet_port.type" is set to 1 (Static
0 IP Address). Y
0-DHCP
1-Static IP Address
It configures the IPv6 address.
Blank Note: It works only if the value of the parameter Y
Example:
network.ipv6_internet_port.ip =
(IPv4 & IPv6).
2026:1234:1:1:215:65ff:fe1f:caa
It configures the IPv6 default gateway.
Example:
network.ipv6_internet_port.gateway =
( IPv4 & IPv6), and
3036:1:1:c3c7:c11c:5447:23a6:255
"network.ipv6_internet_port.type"
It configures the primary IPv6 DNSisserver.
set to 1 (Static
IP Address).
Example:
network.ipv6_primary_dns = 3036:1:1:c3c7:
( IPv4 & IPv6), and
c11c:5447:23a6:256
"network.ipv6_internet_port.type"
It configures the secondary IPv6 DNS is set to 1 (Static
server.
IP Address).
Example:
"network.ip_address_mode" is set to 1 (IPv6) or 2
network.ipv6_secondary_dns =
(IPv4 & IPv6). In DHCP environment, you also need
2026:1234:1:1:c3c7:c11c:5447:23a6
toenables
It make sure the value
or disables of IP
the the parameter
phone to obtain IPv6
"network.ipv6_static_dns_enable"
network is set
settings via SLAAC (Stateless to 1 (On).
Address
1 Note: It works only if the value of the parameter Y
Autoconfiguration) method.
0-Disabled
toconfigures
It make surethe
theInternet
value of(WAN)
the parameter
port type for IPv4.
"network.ipv6_static_dns_enable" is set to 1 (On).
0 1-Enabled Y
0-DHCP
Note: SLAAC is enabled on T42G/T41P IP phones
1-PPPoE (not applicable to T42G/T41P/T40P IP
byconfigures
It default. You
theare notaddress.
IPv4 allowed to configure this
phones)
parameter for those IP phones.
Blank Example: Y
2-Static IP Address
network.internet_port.ip = 192.168.1.20
Note:
It It works
configures only
the if subnet
IPv4 the value of the parameter
mask.
Blank network.ip_address_mode is set to 0 (IPv4) or 2 Y
( IPv4 & IPv6).
Example:
( IPv4 & IPv6), and "network.internet_port.type" is
network.internet_port.mask = 255.255.255.0
set to 2 (Static IP Address).
It configures the IPv4 default gateway.
Example:
network.internet_port.gateway = 192.168.1.254
It configures the primary IPv4 DNS server.
Example:
network.primary_dns = 202.101.103.55
It configures the secondary IPv4 DNS server.
Blank "network.ip_address_mode" is set to 0 (IPv4) or 2 Y
Example:
network.secondary_dns = 202.101.103.54
to make sure the value of the parameter
"network.static_dns_enable" is set to 1 (On).
to make sure the value of the parameter
"network.static_dns_enable" is set to 1 (On).
It configures the login authentication method.
0 0-enabled all supportive authentication method N
1-org-id authentication
2-OAuth authentication
4-NTLM authentication
8-device pairing authentication

File
et donot support
Phone User Interface
Web User Interface

T42G/T41P/T40P T48G/T46G
Account->Register- Sign in->User Sign-in- Sign in->User Sign-in->Sign-in

>Login address >Sign in address Address
Account->Register- Sign in->User Sign-in- Sign in->User Sign-in->User

>Register Name >User Name
Account->Register- Sign in->User Sign-in-

Sign in->User Sign-in->Password
>Password >Password
Sign in->PIN
Account->Register- Sign in->PIN Authentication-
Authentication-
>Extension >Extension
>Extension
Sign in->PIN
Account->Register->Pin Authentication- Sign in->PIN Authentication->PIN
>Extension PIN
Account->Codec / /
Account->Codec / /
Account->Codec / /
/ / /
Account->Basic->Auto Menu->Features->Auto Menu->Features->Auto Answer-

Answer Answer->System Status >Line 1
Account->Basic-
/ /
>Missed Call Log
/ / /
Menu->Settings->Basic
Account->Basic->Ring Menu->Basic->Sound->Ring
Settings->Ring Tones-
Type Tones
>"user name"
/ / /
Menu->Basic->Date & Time
Settings->Time & Date- Settings->Time & Date-
->General->SNTP Settings->Time
>Time Zone >SNTP Settings->Time
Zone
Zone
Menu->Basic->Date & Time-
>General->SNTP Settings-
>Location >SNTP Settings-
>Location
>Location
>General->SNTP Settings->NTP
>Primary Server >SNTP Settings->NTP
Server1
Server1
>General->SNTP Settings->NTP
>Secondary Server >SNTP Settings->NTP
Server2
Server2
Settings->Time & Date-

>Synchronism / /
(15~86400s)
>General->SNTP Settings-
>Daylight Saving Time >SNTP Settings-
>Daylight Saving
>Daylight Saving

/ /
>Fixed Type

/ /
>Start Date

/ /
>End Date

/ /
>Offset(minutes)
>Time & Date Format->Time
>Time Format >Time & Date Format-
Format
>Time Format
>Time & Date Format->Date
>Date Format >Time & Date Format-
Format
>Date Format
Settings->Time & Date- Menu->Basic->Date & Time-
>DHCP Time >DHCP Time
>DHCP Time

/ /
>Manual Time
/ /
>NTP by DHCP Priority
/ / /
Menu->Settings-
Network->Basic-
>Advanced Settings- Menu->Advanced->Network-
>Internet Port-
>Network->WAN Port- >WAN Port->IP Mode
>Mode(IPv4/IPv6)
>IP Mode
Menu->Settings-
Network->Basic->IPv6
Config->Static IP
>Network->WAN Port- >WAN Port->IPv6->Static IP-
Address->IPv6
>IPv6->Static IPv6 >IPv6 IP Prefix
Prefix(0~128)
Client->IPv6 IP Prefix
Menu->Settings-
Network->Basic->IPv6 >Advanced Settings- Menu->Advanced->Network-
Config >Network->WAN Port- >WAN Port->IPv6
>IPv6
Menu->Settings-
Config->Static IP >Network->WAN Port- >WAN Port->IPv6->Static IP->IP
Address->IP Address >IPv6->Static IPv6 Address
Client->IPv6 IP
Menu->Settings- For T48G IP phones:
Network->Basic->IPv6 Menu->Settings- Menu->Advanced->Network-
>Network->WAN Port- >WAN Port->IPv6->Static IP-
Config->Static IP >Advanced Settings- >WAN Port->IPv6->Static IP-
>IPv6->Static IPv6 >Pri.DNS
Address->Gateway >Network->WAN Port- >Gateway
Client->IPv6 Default Or Menu->Advanced->Network-
>IPv6->Static IPv6
Gateway >WAN
For Port->IPv6->DHCP->Staic
T48G IP phones:
Client->IPv6 Pri.DNS
Menu->Settings-
Network->Basic->IPv6 DNS(Enabled) ->Pri.DNS
Menu->Advanced->Network-
Or Menu->Settings-
>Advanced Settings-
Config->Static IP >WAN Port->IPv6->Static IP-
>Advanced Settings-
>Network->WAN Port-
Address->Primary DNS For T46G IP phones:
>Sec.DNS
>Network->WAN
>IPv6->Static Port-
IPv6
Or Menu->Advanced->Network-
>IPv6->DHCPSec.DNS
Client->IPv6 IPv6
Network->Basic->IPv6 Port->IPv6->Static IP-
>WAN Port->IPv6->DHCP->Staic
Client->Staic
Or Menu->Settings-
Config->Static IP >Primary DNS ->Sec.DNS
DNS(Enabled)
DNS(Enabled)
>Advanced ->IPv6
Settings-
Address->Secondary Or Menu->Advanced->Network-
Pri.DNS
>Network->WAN Port-
DNS >WAN
For Port->IPv6->DHCP->Staic
T46G IP phones:
>IPv6->DHCP IPv6
DNS(Enabled)->Primary DNS
Client->Staic
Network->Advanced- >WAN Port->IPv6->Static IP-
DNS(Enabled) ->IPv6
>ICMPv6 Status- / >Secondary
/ DNS
Sec.DNS
>Active Or Menu->Advanced->Network-
Menu->Settings- DNS(Enabled) ->Secondary DNS
Config >Network->WAN Port- >WAN Port->IPv4
>IPv4
Menu->Settings-
Config->Static IP >Network->WAN Port- >WAN Port->IPv4->Static IP->IP
Address->IP Address >IPv4->Static IPv4 Address
Client->IPv4
Menu->Settings-
Config->Static IP >Network->WAN Port- >WAN Port->IPv4->Static IP-
Address->Subnet Mask >IPv4->Static IPv4 >Subnet
For T48GMask
IP phones:
Client->Subnet Mask
Menu->Settings- Menu->Advanced->Network-
>Advanced Settings- >WAN Port->IPv4->Static IP-
Network->Basic->IPv4 Menu->Advanced->Network-
>Network->WAN
Menu->Settings- Port- >Pri.DNS
Config->Static IP >WAN Port->IPv4->Static IP-
>IPv4->Static
>Advanced IPv4
Settings- Or Menu->Settings->Advanced-
Address->Gateway >Gateway
For T48G IP phones:
Client->Default
>Network->WAN Port- >Network->WAN Port->IPv4-
Gateway
>IPv4->Static IPv4 Client- >DHCP->Staic DNS(Enabled)-
>WAN Port->IPv4->Static IP-
Network->Basic->IPv4 >IPv4
Menu->Settings-
Pri.DNS >Pri.DNS
>Sec.DNS(Secondary DNS)
Config->Static IP Or Menu->Settings-
>Advanced Settings-
Address->Primary DNS >Advanced
>Network->WANSettings-
Port- For T46G IP phones:
>Network->WAN Port- >WAN Port->IPv4->DHCP->Staic
>IPv4->Static IPv4 Menu->Advanced->Network-
Network->Basic->IPv4 >IPv4->DHCP IPv4 Client- DNS(Enabled)
Client->IPv4 Sec.DNS >WAN Port->IPv4->Static IP-
>Static DNS (Enabled) ->Sec.DNS(Secondary DNS)
Config->Static IP Or Menu->Settings- >Primary DNS
Address->Secondary ->IPv4 Pri.DNS
>Advanced Settings- Or Menu->Settings->Advanced-
For T46G IP phones:
DNS >Network->WAN Port- >Network->WAN Port->IPv4-
>IPv4->DHCP IPv4 >DHCP->Staic DNS(Enabled)
>WAN Port->IPv4->Static IP-
Client->Static DNS ->Primary DNS
>Sec.DNS(Secondary DNS)
(Enabled) ->IPv4
Sec.DNS
DNS(Enabled)
->Sec.DNS(Secondary DNS)
/ / /
Further Reference
http://support.yealink.com/document
Front/forwardToDocumentFrontDisplayP
age
Yealink Skype for Business HD IP Phones

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide
Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide
Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide

Administrator Guide
/
Description of Configuratio
Y: All Skype for Business phones support N: All Skype for Business phones do not support Y(): Only Skype for Business p
The name of the Common CFG file for each model is shown below:
T48G: y000000000035.cfg T46G: y000000000028.cfg T42G: y000000000029.cfg T41P: y000000000036.cfg
T48G/T46G/T42
Function Parameter
G/T41P/T40P
License lync_license_dat.url Y
Hostname network.dhcp_host_name Y
N(T42G/T41P/T40
network.pppoe.user
P)
PPPoE
N(T42G/T41P/T40
network.pppoe.password
P)
network.pc_port.enable Y
network.internet_port.speed_duplex Y
Network_Advanced network.pc_port.speed_duplex Y
network.static_dns_enable Y
network.ipv6_static_dns_enable Y
network.vlan.pc_port_mode N(T40P)
network.vlan.internet_port_enable Y
network.vlan.internet_port_vid Y
network.vlan.internet_port_priority Y
VLAN network.vlan.pc_port_enable Y
network.vlan.pc_port_vid Y
network.vlan.pc_port_priority Y
network.vlan.dhcp_enable Y
network.vlan.dhcp_option Y
network.port.http Y
network.port.https Y
WEB HTTP(S)
wui.https_enable Y
wui.http_enable Y
network.qos.rtptos Y
QoS
network.qos.signaltos Y
network.802_1x.mode Y
network.802_1x.identity Y
802.1X network.802_1x.md5_password Y
network.802_1x.root_cert_url Y
network.802_1x.client_cert_url Y
network.lldp.enable Y
LLDP
network.lldp.packet_interval Y
network.cdp.enable Y
CDP
network.cdp.packet_interval Y
Span to PC network.span_to_pc_port Y
syslog.mode Y
Syslog syslog.server Y
syslog.log_level Y
Autop_Mode auto_provision.power_on Y
auto_provision.dhcp_option.enable Y
AutoP_DHCP auto_provision.dhcp_option.list_user_options Y
auto_provision.dhcp_option.option60_value Y
auto_provision.repeat.enable Y
AutoP_Repeat
auto_provision.repeat.minutes Y
auto_provision.weekly.enable Y
AutoP_Weekly
auto_provision.weekly.dayofweek Y
AutoP_Weekly
auto_provision.weekly.begin_time Y
auto_provision.weekly.end_time Y
auto_provision.server.url Y
auto_provision.server.username Y
AutoP_URL
auto_provision.server.password Y
auto_provision.url_change_reautop.enable Y
auto_provision.aes_key_in_file Y
auto_provision.aes_key_16.com Y
Autop_Aes Key
auto_provision.aes_key_16.mac Y
auto_provision.update_file_mode Y
Watch_dog watch_dog.enable Y
voice.vad Y
Echo Cancellation voice.cng Y
voice.echo_cancellation Y
voice.jib.adaptive Y
Jitter Buffer
voice.jib.min Y
Jitter Buffer
voice.jib.max Y
voice.jib.normal Y
voice.tone.country Y
voice.tone.dial Y
voice.tone.ring Y
voice.tone.busy Y
voice.tone.congestion Y
Tones
voice.tone.callwaiting Y
voice.tone.dialrecall Y
voice.tone.info Y
voice.tone.stutter Y
voice.tone.autoanswer Y
lang.wui Y
lang.gui Y
gui_lang.url Y
Language
Language
gui_lang.delete Y
wui_lang.url Y
wui_lang.delete Y
dialplan.dialnow.rule.X
(X ranges from 1 to 100) Y
Dialnow dialplan_dialnow.url Y
phone_setting.dialnow_delay Y
Network_Expired
network.attempt_expired_time Y
Time
Forward
forward.international.enable Y
International
features.normal_refuse_code Y
features.auto_answer_delay Y
features.call_num_filter Y
features.relog_offtime Y
sfb.account_lock.enable Y
sfb.always_online.enable Y
Features
features.fwd_diversion_enable Y
features.remember_password.enable Y
features.redial_action.type Y
features.dial.auto_quit_time Y
features.hotline_number Y
features.hotline_delay Y
features.bluetooth_enable Y(T48G/T46G)
Features_Bluetooth
features.bluetooth_adapter_name Y(T48G/T46G)
call_waiting.enable Y
Call Waiting
call_waiting.tone Y
Phone Lock sfb.phone_lock.enable Y
sip.btoe.enable Y
sip.btoe.pairing_mode Y
BToE
sip.btoe.as_audio_dev.enable Y
sip.btoe.transport_sercure.enable Y
features.action_uri.enable Y
Remote Control
features.action_uri_limit_ip Y
Update Checking
sfb.update_time Y
Time
E911 sfb.e911_location_tip Y
features.dtmf.hide Y
features.dtmf.hide_delay Y
Features_DTMF features.dtmf.repetition Y
features.dtmf.replace_tran Y
features.dtmf.transfer Y
option120 sip.option120_get_lync_server.enable Y
ldap.search.enable Y
LDAP
sip.ldap_download_rootca.enable Y
features.headset_prior Y
features.headset_training Y
features.busy_tone_delay Y
features.send_key_tone Y
features.key_tone Y
features.ringer_device.is_use_headset Y
features.play_hold_tone.enable Y
Features_ Audio Settings

Features_ Audio Settings
features.play_hold_tone.delay Y
features.redial_tone Y
features.allow_mute Y
features.partition_tone Y
features.play_local_dtmf_tone_enable Y
features.key_as_send Y
features.send_pound_key Y
features.voice_mail_tone_enable Y
phone_setting.call_log.update_time Y
features.exchange_call_log.enable Y
Feature history features.call_history_contacts_avator.enable Y(T48G/T46G)
features.responese_group_history.enable Y
features.save_call_history Y
sfb.search_delay_time Y
phone_setting.inter_digit_time Y
phone_setting.ring_type Y
ringtone.url Y
ringtone.delete Y
Phone Settings
phone_setting.predial_autodial Y
phone_setting.voicemail.update_time Y
phone_setting.is_deal180 Y
features.reset_by_long_press_enable Y
phone_setting.product_name Y
phone_setting.common_power_led_enable Y
phone_setting.mail_power_led_flash_enable Y
phone_setting.ring_power_led_flash_enable Y
LED
phone_setting.talk_and_dial_power_led_enable Y
phone_setting.mute_power_led_flash_enable Y
phone_setting.hold_and_held_power_led_flash_enable Y
phone_setting.active_backlight_level Y(T48G/T46G)
Phone
phone_setting.inactive_backlight_level Y(T48G/T46G)
Setting_Display
phone_setting.contrast N(T42G/T41P)
security.user_name.user Y
security.user_name.admin Y
security.user_password Y
security.trust_certificates Y
Security
security.ca_cert Y
security.dev_cert Y
security.cn_validation Y
phone_setting.reserve_certs_enable Y
trusted_certificates.url Y
Trusted Certificates
trusted_certificates.delete Y
server_certificates.url Y
Server Certificates
server_certificates.delete Y
Custom
configuration.url Y
Configuration
features.factory_pwd_enable Y
Custom Factory
features.custom_factory_config.enable Y
Configuration
custom_factory_configuration.url Y
firmware.url Y
Upgrade Firmware
auto_provision.reset_factory.enable Y
local_contact.data.url Y
sfb.local_favorite.enable N(T40)
sfb.local_favorite.sort N(T40)
setting.contacts_name_from_address.enable Y
setting.search_original_number.enable Y
Contact phone_setting.directory_search.display_number N(T48)
phone_setting.search_ad_contacts.return_number Y
phone_setting.search_outlook_contacts.return_number Y
exchange.outlook_contact_sync.enable Y
phone_setting.server_skype_search.enable Y
phone_setting.outlook_contacts.update_time Y
CAP account.1.phone_lock.pin Y
sfb.calendar.enable Y
Calendar
phone_setting.calendar.update_time Y
sfb.presence.inactive_time Y
Presence
sfb.presence.away_time Y
pre_dial tone sfb.pre_dial_tone.enable Y
multicast.codec Y
multicast.receive_priority.enable Y
multicast.receive_priority.priority Y
Multicast
(X ranges from 1 to multicast.listen_address.X.label Y
10.)
multicast.listen_address.X.ip_address Y
multicast.paging_address.X.ip_address Y
multicast.paging_address.X.label Y
Ringback features.local_ringback_tone_time Y
ICE sip.ice_syslog.enable Y
Security sip.lync_check_sn.enable Y
sip.auto_discover_get_lync_server.enable Y
Automation
sip.lync_automation.enable Y
Features_Transfer transfer.multi_call_trans_enable N(T48G/T46G)

voice.handfree_send Y
Volume voice.handset_send Y
voice.headset_send Y
SIP Auth sip.srtp_take_mki.enable Y
MOH sfb.music_on_hold.enable Y
Web-sign features.device_pairing.url Y
exchange.outlook_contact.enable Y(T48)
exchange.outlook_contact.request_number Y
Exchange
exchange.call_log.request_number Y
exchange.voice_mail.request_number Y
phone_setting.name_full_display.enable Y(T48G)
UI
phone_setting.username_scroll_display Y(T48G)
features.user_sign_in.enable Y
features.sign_in_via_btoe.enable Y
Login
features.pin_authentication.enable Y
features.device_pairing_for_online.enable Y
Y(T46G/T42G/T41
phone_setting.line_key_led.enable
P)
LED
phone_setting.exp40_led.enable Y(T48G/T46G)
redirect.enable Y
RPS
auto_provision.rps_highest_priority.enable Y
phone_setting.private_line_ring.enable Y
Privte Line
phone_setting.private_line_ring_type Y
autoprovision.X.name Y
autoprovision.X.code Y
autoprovision.X.url Y
Autop Code autoprovision.X.user Y
autoprovision.X.password Y
autoprovision.X.com_aes Y
autoprovision.X.mac_aes Y
ption of Configuration Parameters in Common.cfg File
pport Y(): Only Skype for Business phones in bracket support N(): Skype for Business phones in bracket do not support
T41P: y000000000036.cfg T40P: y000000000054.cfg
Permitted
Default Value Description Reboot
Value
For T48G IP phones:
The default value is SIP-
T48G. It configures the access URL of the Skype for
For T46G IP phones: Business feature license.
String within
The defaultBlank
value is SIP- Y
99 characters
T46G. Example:
For T42G IP phones: lync_license_dat.url =
The default value is SIP- It configures the DHCP option 12 hostname on
http://192.168.1.20/License_$MAC.dat
String within T42G. the IP phone.
Y
99 characters For T41P IP phones: The IP phone will replace the characters $MAC
The default value is SIP- with its MAC address during auto provisioning. For
T41P. example,
It thethe
configures MAC address
user nameoffor
one T46G
PPPoE IP phone
connection.
For T40P IP phones: is 00156543EC97. When performing auto
String within
The defaultBlank
value is SIP- provisioning, the IP phone will request to
Example: Y
32 characters
T40P. download the License_00156543ec97.dat
network.pppoe.user = Xmyl0592123 file
from the provisioning server address
It configures the password for PPPoE connection.
http://192.168.1.20.
String within network.ip_address_mode is set to 0 (IPv4) or 2
Blank Example: Y
99 characters ( IPv4 & IPv6), and "network.internet_port.type" is
network.pppoe.password = yealink123
set to 1 (PPPoE).
It enables or disables the PC (LAN) port.
0 or 1 1 network.ip_address_mode is set to 0 (IPv4) or 2 Y
0-Disabled
set to 1 (PPPoE).
1-Auto Negotiate
It configures the transmission method of the
0, 1, 2, 3, 4 or Internet (WAN) port.
0 Y
5
0-Auto Negotiate
It configures the transmission method of the PC
1-Full Duplex 10Mbps
0, 1, 2, 3, 4 or (LAN) port.
0 Y
5 2-Full Duplex 100Mbps
0-Auto Negotiate
3-Half Duplex
It triggers 10Mbps
the static DNS feature to on or off.
0 or 1 0 4-Half
0-Off Duplex 100Mbps Y
5-Full Duplex 1000Mbps (only applicable to
1-On
3-Half
It Duplex
triggers 10Mbps
the static IPv6 DNS feature to on or off.
T48G/T46G/T42G IP phones)
0 or 1 0 If it is set to 0 (Off), the IP phone will use the IPv4 Y
4-Half Duplex 100Mbps
0-Off
DNS obtained from DHCP.
5-Full Duplex 1000Mbps (only applicable to
1-On
If it
It is set to 1the
configures (On),
waythetheIPIP
phone
phone will use
processes
T48G/T46G/T42G IP phones)
manually
packets for configured
the PC (LAN)static IPv4
port DNS.
when VLAN is
0 or 1 1 If it is set to 0 (Off), the IP phone will use the IPv6 Y
enabled
Note: It on the only
works PC (LAN)
if theport.
value of the parameter
DNS obtained from DHCP.
network.pc_port.enable is set to 1 (Auto
network.internet_port.type
0-when packets are sent from is setPC
the toport
0 (DHCP).
to the
Negotiate).
If
It it is set to
enables or1disables
(On), the IP VLAN
the phoneforwill use
the Internet
Internet port, the IP phone will forward the
manually
(WAN) configured static IPv6 DNS.
port.
0 or 1 0 packets directly. Y
0-Disabled
1-when packets are sent from the PC port to the
network.ipv6_internet_port.type is set to 0
Internet
It port,the
configures andVLAN
thereIDisfor
no the
VLAN tag in (WAN)
Internet the
(DHCP).
1-Enabled
Integer from 1 packet, the IP phone will tag the packet with the
port.
1 configured tag for the PC port and then forward it. Y
to 4094
Note: When packets are sent from the Internet

port to the PC port, remove the packets tag if it is
the same as the configured tag for the PC port,
else forward the packets directly.
It configures the VLAN priority for the Internet
Integer from 0 (WAN) port.
0 Y
to 7
7 is the highest priority, 0 is the lowest priority.
It enables or disables the VLAN for the PC (LAN)
port.
0 or 1 0 Y
0-Disabled
It configures the VLAN ID for the PC (LAN) port.
1-Enabled
Integer from 1
1 Y
to 4094
It configures the VLAN priority for the PC (LAN)

Integer from 0 port.
0 Y
to 7
It enables or disables the DHCP VLAN discovery
feature on the IP phone.
0 or 1 1 Y
0-Disabled
It configures the DHCP option from which the IP
1-Enabled
Integer from 1 phone will obtain the VLAN settings.
132 You can configure at most five DHCP options and Y
to 255
separate them by commas.
It configures the HTTP port for the user to access
Integer from 1 the web user interface of the IP phone using the
80 HTTP protocol. Y
to 65535
It configures the HTTPS port for the user to

Integer from 1 access the web user interface of the IP phone
443 using the HTTPS protocol. Y
to 65535
It enables or disables the user to access the web

user interface of the IP phone using the HTTPS
0 or 1 1 protocol. Y
0-Disabled
It enables or disables the user to access the web
user interface of the IP phone using the HTTP
0 or 1 1 1-Enabled Y
protocol.
0-Disabled
It configures the DSCP (Differentiated Services
Integer from 0 Code Point) for voice packets.
46 1-Enabled Y
to 63
The default DSCP value for RTP packets is 46
(Expedited Forwarding).
It configures the DSCP (Differentiated Services
Integer from 0 Code Point) for SIP packets.
26 Y
to 63
The default DSCP value for SIP packets is 26
(Assured Forwarding).
It configures the 802.1x authentication method.
0, 1, 2, 3, 4, 5,
0 0-Disabled Y
6 or 7
1-EAP-MD5
It configures the user name for 802.1x
String within authentication.
Blank 2-EAP-TLS Y
32 characters
Example:
3-EAP-PEAP/MSCHAPv2
network.802_1x.identity = admin
It configures the password for 802.1x
String within 4-EAP-TTLS/EAP-MSCHAPv2
authentication.
32 characters network.802_1x.mode is set to 1, 2, 3, 4, 5, 6 or
5-EAP-PEAP/GTC
Example:
7.
network.802_1x.md5_password = admin123
It configures the access URL of the CA certificate.
6-EAP-TTLS/EAP-GTC
URL within 511 Note: It works only if the value of the parameter
Blank Example: N
characters 7-EAP-FAST
network.802_1x.mode is set to 1, 3, 4, 5, 6 or 7.
network.802_1x.root_cert_url =
http://192.168.1.10/ca.pem

network.802_1x.mode is set to 2, 3, 4, 5, 6 or 7.
The format of the certificate must be *.pem, *.crt,
*.cer or *.der.
It configures the access URL of the device
URL within 511 certificate.
Blank N
characters
Example:
network.802_1x.client_cert_url =
It enables or disables the LLDP (Linker Layer
http://192.168.1.10/client.pem
Discovery Protocol) feature on the IP phone.
0 or 1 1 Y
0-Disabled
network.802_1x.mode is set to 2 (EAP-TLS). The
format
It of thethe
configures certificate
intervalmust be *.pem.
(in seconds) for the IP
1-Enabled
Integer from 1 phone to send the LLDP (Linker Layer Discovery
60 Protocol) request. Y
to 3600

It enables or disables the CDP (Cisco Discovery
network.lldp.enable is set to 1 (Enabled).
Protocol) feature on the IP phone.
0 or 1 1 Y
0-Disabled
It configures the interval (in seconds) for the IP
1-Enabled
Integer from 1 phone to send the CDP (Cisco Discovery Protocol)
60 request. Y
to 3600 Note: If it is set to 1 (Enabled), the IP phone will
attempt to determine its VLAN ID through CDP.
It enables or disables the IP phone to span data
network.cdp.enable is set to 1 (Enabled).
packets received from the WAN (Internet) port to
0 or 1 0 the PC (LAN) port. Y
0-Disabled
Configures the IP phone to export log files to the
local system or a syslog server.
0-Local
If it is set to 1 (Enabled), all data packets from
Internet
It port the
configures can IP
beaddress
received
orby PC (LAN)
domain nameport.
of
1-Server
IP address or the syslog server when exporting log to the
Blank Note: It
syslog works only if the value of the parameter
server. Y
domain name
network.pc_port.enable is set to 1 (Auto
Negotiate).
Example:
Configures the detail level of global syslog
syslog.server = 192.168.1.100
Integer from 0 information to be exported.
3 Y
to 6 Note: It works only if the value of the parameter
0-system is unusable
syslog.mode is set to 1 (Server).
It triggers the power on feature to on or off.
1-action must be taken immediately
0 or 1 1 0-Off N
2-critical condition
1-On
3-error
It conditions
triggers the DHCP Option feature to on or off.
0 or 1 1 If it is set to 1(On), the IP phone will perform an N
4-warning
0-Off conditions
auto provisioning process when powered on.
5-normal
1-On but significant condition
It configures the custom DHCP option for
Integer from requesting
6-informationalprovisioning server address.
Blank If it is set to 1(On), the IP phone will obtain the N
128 to 254 provisioning server address by detecting DHCP
options.
auto_provision.dhcp_option.enable is set to 1
It configures the value (vendor name of the
(On).
String within device) of DHCP option 60.
yealink N
99 characters
It triggers the repeatedly feature to on or off.

0 or 1 0 0-Off N
1-On
It configures the interval (in minutes) for the IP
Integer from 1 phone to perform an auto provisioning process
1440 If it is set to 1 (On), the IP phone will perform an N
to 43200 repeatedly.
auto provisioning process repeatedly.
It triggers the weekly feature to on or off.
auto_provision.repeat.enable is set to 1 (On).
0 or 1 0 0-Off N
1-On
If it is set to 1 (On), the IP phone will perform an

auto provisioning process weekly.
0,1,2,3,4,5,6 It configures the days of the week for the IP
or a phone to perform an auto provisioning process
combination of 0123456 weekly. N
these
digits 0-Sunday
It configures the begin time of the day for the IP
Time from phone to perform an auto provisioning process
00:00 1-Monday N
00:00 to 23:59 weekly.
2-Tuesday
It configures the end time of the day for the IP
auto_provision.weekly.enable is set to 1 (On).
Time from 3-Wednesday
phone to perform an auto provisioning process
00:00 weekly. N
00:00 to 23:59
4-Thursday
It configures the access URL of the provisioning
5-Friday
URL within 511 server.
Blank N
characters 6-Saturday
Example:
It configures the user name for provisioning
String within auto_provision.weekly.dayofweek
server access. = 01
Blank It means the IP phone will perform an auto N
32 characters
provisioning process every Sunday and Monday.
It configures
Note: the
It works password
only for provisioning
if the value server
of the parameter
String within access.
Blank N
32 characters
It enables or disables the IP phone to perform

auto provision immediately once the phone
0 or 1 0 receives a provision url via Inband provisioning N
during sign-in process.
It enables or disables the IP phone to decrypt
0-Disabled
configuration files using the encrypted AES keys.
0 or 1 0 N
1-Enabled
0-Disabled
It configures the plaintext AES key for decrypting
1-Enabled
the Common CFG file.
16 characters Blank The valid characters contain: 0 ~ 9, A ~ Z, a ~ z N
If it is set to 1 (Enabled), the IP phone will
and the following special characters are also
download <y0000000000xx_Security>.enc and
supported: # $ % * + , - . : = ? @ [ ] ^ _ { } ~.
<MAC_Security>.enc
It configures the plaintext files AES
during
keyauto
for decrypting
provisioning,
the MAC-Oriented and then
CFG decrypts
file. these files into
16 characters Blank Example: N
the plaintext
The keys (e.g.,
valid characters key2, 0key3)
contain: ~ 9, respectively
A ~ Z, a ~ z
auto_provision.aes_key_16.com =
using
and the
the phone built-in
following specialkey (e.g., key1).
characters The IP
are also
0123456789abcdef
phone then#
supported: decrypts
$ % * +the , - .encrypted
: = ? @ [ ]configuration
^ _ { } ~.
It enables
files using or disables the key
corresponding IP phone
(e.g., to onlykey3).
key2, update
Note:
the It works
settings onlydownloaded
in the if the value encrypted
of the parameter
files.
0 or 1 0 Example: Y
auto_provision.aes_key_in_file is set to 0
If it is set to 0 (Disabled), the IP phone
auto_provision.aes_key_16.mac = will
(Disabled).
0-Disabled
decrypt the encrypted configuration files using
0123456789abmins
plaintext
It enablesAES keys configured
or disables the Watch onDog
the feature.
IP phone.
1-Enabled
0 or 1 1 auto_provision.aes_key_in_file is set to 0
0-Disabled N
If it is set to 0 (Disabled), the IP phone will
(Disabled).
download the configuration files (e.g., sip.cfg,
1-Enabled
account.cfg)
It enables or from the the
disables serverVADduring
(Voiceauto
Activity
provisioning
Detection) no matter
feature on the whether the files are
IP phone.
0 or 1 0 If it is set to 1 (Enabled), the IP phone will reboot N
encrypted or not. And then resolve these files and
automatically when the system is broken down.
update
0-Disabled settings onto the IP phone system.
It
If enables
it or1disables
is set to thethe
(Enabled), CNG IP(Comfortable Noise
phone will not
1-Enabled
Generation) feature on the IP phone.
download the unencrypted configuration files
0 or 1 1 N
(e.g., sip.cfg, account.cfg) file from the server
0-Disabled
during auto provisioning or will not resolve the
unencrypted files afterthe
It enables or disables downloading.
AEC (Acoustic Echo
1-Enabled
Canceller) feature on the IP phone.
0 or 1 1 N
0-Disabled
It configures the type of jitter buffer.
1-Enabled
0 or 1 1 0-Fixed N
1-Adaptive
It configures the minimum delay time (in
Integer from 0 milliseconds) of jitter buffer.
60 N
to 400
Custom, Note: It works only if the value of the parameter
Australia, voice.jib.adaptive is set to 1 (Adaptive).
Austria, Brazil, It configures the maximum delay time (in
Integer from
Belgium, 0
Chile, milliseconds) of jitter buffer.
240 N
to 400
China,
Czech,Czech Note: It works only if the value of the parameter
ETSI, voice.jib.adaptive is set to 1 (Adaptive).
It configures the normal delay time (in
Denmark, milliseconds) of jitter buffer.
Integer from 0
Finland, 120 N
to 400
France, Note: It works only if the value of the parameter
Germany, voice.jib.adaptive is set to 0 (Fixed).
Great Britain, It configures the country tone for the IP phone.
Greece,
Custom Example: N
Hungary,
Lithuania, voice.tone.country = Custom
India, Italy, It customizes the dial tone.
Japan, Mexico,
NewString
Zealand, Blank tone list = element[,element] [,element] N
Netherlands, Where
Norway, element = [!]Freq1[+Freq2][+Freq3][+Freq4]
Portugal, It customizes the ringback tone.
/Duration
Spain, The value format is Freq/Duration. For more
String Blank Freq: the frequency of the tone (ranges from 200 N
Switzerland, information on the value format, refer to the
to 4000 Hz). If it is set to 0 Hz, it means the tone
Sweden, parameter voice.tone.dial.
is not played.
Russia, United
It customizes the tone when the callee is busy.
States Note: It works only if the value of the parameter
For T40P:
The value format is Freq/Duration. For more
String Blank voice.tone.country is set to Custom. N
A tone is comprised
information of at format,
on the value most two different
refer to the
frequencies.
parameter voice.tone.dial.
It
Forcustomizes the tone when the network is
T48G/T46G/T42G/T41P:
congested.
A
String Blank voice.tone.countryof
tone is comprised is at
setmost four different
to Custom. N
frequencies.
information
Duration: the on duration
the value(in format, refer to the
milliseconds) of the
parameter
dial voice.tone.dial.
tone, ranges
It customizes the from 0 to 30000ms.
call waiting tone.
String Blank Note:
You canIt configure
works only ifmost
the value
eight of the parameter N
information on theat
value format, different tones
refer to the
voice.tone.country
for one condition, and isseparate
set to Custom.
them by commas.
parameter voice.tone.dial.
(e.g.,
It customizes the call back tone.
250/200,0/1000,200+300/500,200+500+800+15
00/1000).
String Blank voice.tone.country is set to Custom. N
information on the value format, refer to the
parameter
If you wantvoice.tone.dial.
the IP phone to play tones once, add
an exclamation
It customizes themark
info ! before
tone. tones
The IP (e.g.,
phone will! play
250/200,0/1000,
the info tone with the special information, for
String Blank voice.tone.country is set to Custom.
200+300/500,200+500+800+1500/1000). N
example, the number you are calling is not in
service.
Note: It works
The value only
format if the value of the
is Freq/Duration. parameter
For more
It customizes the toneiswhen
voice.tone.country set tothe IP phone
Custom.
receives a voice mail.
String Blank parameter voice.tone.dial. N
English, information on the value format, refer to the
Chinese parameter voice.tone.dial.
voice.tone.country
It is settone
customizes the warning to Custom.
for auto answer.
Simplified, The value format is Freq/Duration. For more
String
Chinese Blank Note: It works only if the value of the parameter N
Traditional, voice.tone.country is set to Custom.
English, parameter voice.tone.dial.
French,
Chinese It configures the language used on the web user
German, Note: It works only if the value of the parameter
Simplified, interface.
Italian, Polish, voice.tone.country is set to Custom.
Chinese English N
Portuguese,
Traditional, Example:
Spanish,
French, lang.wui = English
Turkish, It configures the language used on the IP phone
German, If you want to use the custom language (e.g.,
Korean, user interface.
Italian, Polish, Wuilan) for the IP phone, configure the parameter
Russian or the English N
Portuguese, lang.wui = Wuilan.
custom Example:
Spanish,
language lang.gui = English
Turkish, Note:
It If the language
configures the access ofURL
yourofbrowser is not
the custom LCD
name.
Korean, supportedpack
language by the
forIPthe
phone, the web
IP phone user user interface
interface.
URL within 511 Note:
Russian or the Blank will use English by default. N
characters Korean is not applicable to T40P IP phones.
custom Example:
language gui_lang.url =
name. If you want to use the custom language (e.g.,
http://192.168.10.25/000.GUI.English.lang
Guilan) for the IP phone, configure the parameter
During the auto provisioning process, the IP
lang.gui = Guilan.
phone connects to the HTTP provisioning server
192.168.10.25, and downloads the language
pack 000.GUI.English.lang. The English
language translation will be changed accordingly
http://localhost It deletes the specified or all custom LCD
/all or language packs of the phone user interface.
http://localhost Blank N
/Y.GUI.name.la Example:
ng Delete all custom language packs of the phone
It configures the access URL of the custom
user interface
URL within 511 language pack for the web user interface.
Blank gui_lang.delete = http://localhost/all N
characters Delete a custom language pack of the phone user
Example:
interface (e.g., 001.GUI.Chinese_S.lang)
wui_lang.url = http://192.168.10.25/1.English.js
http://localhost gui_lang.delete
It =
deletes the specified or all custom web
During the auto provisioning process, the IP
/all or http://localhost/001.GUI.Chinese_S.lang
language packs and note language packs of the
Blank phone connects to the HTTP provisioning server N
http://localhost web user interface.
192.168.10.25, and downloads the language
/Y.name.js pack 1.English.js.
Example:
The
It English language
configures translation
the dial-now rule (thewill be changed
string used to
Delete all custom language packs of the web user
String within accordingly
match if you have
the numbers modified
entered by thetheuser).
language
Blank interface: N
511 characters template
When file. numbers match the predefined
entered
wui_lang.delete = http://localhost/all
dial-now rule, the IP phone will automatically dial
If you
out thewant to download
numbers withoutmultiple
pressinglanguage
the send packs
key.
Delete
It a custom language pack of the web user
toconfigures
the web user theinterface
access URL of the dial-now
simultaneously, yourule
can
URL within 511 interface (e.g.,
template file. 11.Russian.js):
Blank configure as following:
Example: N
characters wui_lang.delete = http://localhost/11.Russian.js
wui_lang.url = http://192.168.10.25/1.English.js
dialplan.dialnow.rule.1 = 123
The corresponding note language pack (e.g.,
Example:
wui_lang.url = http://192.168.10.25/11.Russian.js
11.Russian_note.xml)
dialplan_dialnow.url =will also be deleted.
It configures the delay time (in seconds) for the
http://192.168.10.25/dialnow.xml
Integer from 0 dial-now rule.
1 During the auto provisioning process, the IP N
to 14 When entered numbers match the predefined
phone connects to the provisioning server
dial-now rule, the IP phone will automatically dial
192.168.10.25, and downloads the replace dial-
out the entered number after the designated
now
It rule file dialnow.xml.
configures the time (in seconds) to wait after a
delay time.
Integer from 1 file transfer fails before retrying the transfer for
30 HTTP/HTTPS connection. Y
to 300 If it is set to 0, the IP phone will automatically dial
out the entered number immediately.
It enables or disables the IP phone to forward
incoming calls to international numbers (the
0 or 1 1 prefix is 00). N
0-Disabled
It configures a return code and reason of SIP
404, 480, 486 response messages when the IP phone rejects an
603 1-Enabled N
or 603 incoming call. A specific reason is displayed on
the callers phone LCD screen.
It configures the delay time (in seconds) before
404-Not Found
Integer from 1 the IP phone automatically answers an incoming
1 call. N
to 4 480-Temporarily Unavailable
486-Busy
It configures Here
the characters the IP phone filters
"account.X.auto_answer" is set to 1 (Enabled).
String within when dialing.
Blank 603-Decline N
99 characters
If the dialed number contains configured
If it is set to the
characters, 486IP(Busy
phone Here), the callers phone
will automatically filter
It
LCDconfigures
screen thedisplay
will timeout the interval
message(in minutes)
Busy Here for
these characters when dialing.
Integer from 1 web access authentication.
when the callee rejects the incoming call.
5 Y
to 1000 Example:
Example:
features.call_num_filter = ,-12
features.relog_offtime = 5
If you
It dial or
enables 3-61, the IPthe
disables phone will filter
IP phone the the
to lock
If you log into the web user interface and leave it
characters
account and 1, the
to prevent andaccount
then dialbeing
out 36.signed in or
0 or 1 0 for 5 minutes, it will automatically log out. N
sign out randomly.
Note: If it is left blank, the IP phone will not
automatically filter any characters when dialing.
0-Disabled
It enables
If you wantortodisables the
filter just IP phone
a space, you to have
maintain
to set
current
the value to , (a space first followed by it.
status until you manually change a
0 or 1 0 1-Enabled N
comma).
0-Disabled
If it is set to 1 (Enabled), the IP phone need an
administrator
It password
enables or disables thetoIPsign in or
phone tosign out. the
present
1-Enabled
diversion information when an incoming call is
0 or 1 0 forwarded to your IP phone. N
Note: If your phone status is DND before dialing
an emergency number, then the phone status will
0- Disabled
beenables
It changed orto available
disables after the emergency
a Remember Password call
even if to
option the value at
appear of the
this IP
parameter
phone loginis set to 1
screen.
(Enabled).
0-Disabled
1-Enabled
If it is set to 1 (Enabled), a Remember

Password option will appear at the phone login
screen, you can enable it to remember your
password.
It configures the type of redial action.
0 or 1 1 0-Press REDIAL key on your phone to enter the N
placed list, and press REDIAL key again to dial the
last dialed number
It configures the time (in seconds) for the IP
phone to return to the idle screen after you
15-99 15 1-Press REDIAL key on your phone to redial the N
search contacts in the dialing screen.
last dialed number
If it is set to 15 (in seconds), the IP phone will
It configures the hotline number that the IP phone
return to idle screen in 15 seconds after
String within automatically dials out when you lift the handset,
Blank searching contacts in the dialing screen. N
32 characters press the Speakerphone key or the line key.
Leaving it blank will disable the hotline feature.
Note:It works only if the value of the parameter
phone_setting.predial_autodial
It is set to 0for the
configures the waiting time (in seconds)
Example:
Integer from 0 (Disabled).
IP phone to automatically dial out the hotline
4 features.hotline_number = 1234 N
to 10 number.
Note: Line key is not applicable to T48G IP
If it is set to 0 (0s), the IP phone will immediately
phones.
It triggers the Bluetooth feature to on or off.
dial out the preconfigured hotline number when
0 or 1 0 you lift the handset, press the Speakerphone key N
0-Off
or press the line key.
For T48G IP phones:
The default value is 1-On
It configures the Bluetooth device name.
Yealink-T48G. If it is set to a value greater than 0, the IP phone
String within
will wait
Note: the designated
It works only if theseconds
value ofbefore dialing
the parameter N
64 characters
For T46G IP phones: out the predefined hotline number
features.bluetooth_enable when
is set to you lift
1 (On).
The default value is the handset, press the Speakerphone or press the
Yealink-T46G. It enables
line key. or disables the call waiting feature.
0 or 1 1 0-Disabled N
Note: Line key is not applicable to T48G IP
phones.
1-Enabled
It enables or disables the IP phone to play the call
waiting tone when the IP phone receives an
0 or 1 1 If it is set to 0 (Disabled), a new incoming call is N
incoming call during a call.
automatically rejected by the IP phone with a
busy message while during a call.
0-Disabled
It enables or disables the phone lock feature.
If it is set to 1 (Enabled), the LCD screen will
present a new incoming call while during a call.
0-Enabled
1-Disabled
perform
It enables anoraudible indicator
disables the BToEwhen receiving
(Better a
Together
new incoming
over Ethernet) call during a call.
feature.
0 or 1 1 If it is set to 0 (Enabled), the IP phone will prompt Y
the user to configure an n-digit unlock PIN at the
0-Disabled
initial sign-in.
call_waiting.enable is set to 1 (Enabled).
It configures the BToE pairing mode..
1-Enabled
0 or 1 0 0-Auto N
If it is set to 0 (Disabled), BToE is disabled on the
phone. Your phone cannot pair with Skype for
1-Manual
Business
It enablesClient.
or disables the IP phone to be used as
an audio device when BToE (Better Together over
0 or 1 0 If it is set to 0 (Auto), you can pair your phone N
Ethernet) is enabled in the VDI (Virtual Desktop
and PC without a pairing code.
Infrastructure) environment.
If it
It is set to
enables or1disables
(Manual),
theyour phone will
encryption generate
transmission
0-Disabled
a pairing the
between codeIPwhen
phonepairing with PC. You
and connected need to
commputer
0 or 1 1 enter the
when BToEpairing
(Bettercode on your
Together BToE
over software to
Ethernet) N
1-Enabled
manually
feature is to pair your phone and PC.
enabled.
Note:
It We or
enables recommend that
disables the IP you setto
phone the value the
receive of
0-TCP
this parameter
action URI to be 1 (Enabled) if you want to
requests.
0 or 1 0 Note: It works only if the value of the parameter N
use BToE in the VDI environment.
sip.btoe.enable
1-TLS encryption is set to 1 (Enabled).
0-Disabled
It configures the IP address of the server from
1-Enabled
IP address or which the IP phone receives the action URI
Blank requests. N
any
Multiple IP addresses are separated by commas.
It configures the interval (in hours) for the IP
For discontinuous IP addresses, multiple IP
Integer from 1 phone to automatically check if there is a
24 addresses are separated by commas. Y
to 48 firmware update available on Skype for Business
For continuous IP addresses, the format likes
Server.
*.*.*.* and the * stands for the values 0~255.
For example:
If it is set to 1 (1 hour), the IP phone will check if
10.10.*.* stands for the IP addresses that range
a firmware update is available on the Skype for
from 10.10.0.0 to 10.10.255.255.
Business Server every 1 hour. If an update is
available, the phone will prompt for an update.
If left blank, the IP phone will reject any HTTP GET
request.
It enables or disables the idle screen to display
the notification Location is not set when the
0 or 1 1 location of the acount is not set. N
0-Disabled
It enables or disables the IP phone to suppress
the display of DTMF digits during an active call.
0-Disabled
It enables or disables the IP phone to display the
1-Enabled
DTMF digits for a short period before displaying
0 or 1 0 asterisks during an active call. N
If it is set to 1 (Enabled), the DTMF digits are
displayed as asterisks.
0-Disabled
It configures the repetition times for the IP phone
to send the end RTP Event packet during an
1, 2 or 3 3 1-Enabled N
active call.
features.dtmf.hide
It enables or disablesisthe
setIPtophone
1 (Enabled).
to send DTMF
sequences for transfer function when pressing
0 or 1 0 the Tran/Transfer soft key or TRANSFER key. N
0-Disabled
It configures the DTMF digits to be transmitted to
String within perform call transfer. Valid values are: 0-9, *, #
Blank 1-Enabled N
32 characters and A-D.
If it is set to 0 (Disabled), the IP phone will
Example:
perform
It enables theortransfer
disablesas normal
the when
IP phone to pressing the
obtain the
features.dtmf.transfer = 123
Tran/Transfer
Skype soft key
for Business or TRANSFER
Server key during
address from a
DHCP by
0 or 1 0 call.
detecting DHCP option 120. N
features.dtmf.replace_tran is set to 1 (Enabled).
0-Disabled
It enablesthe
transmit or designated
disables theDTMF
IP phone toto
digits perform an
the server
LDAP
for (Lightweight
performing call Directory
transfer Access
when Protocol)
pressing the
search when placing
Tran/Transfer soft keyaorcall.
TRANSFER key during a
call.
0-Disabled
It enables or disables the IP phone to download
the Root CA using LDAP (Lightweight Directory
Access Protocol).
0-Disabled
It enables or disables the headset prior feature.
You need to press the HEADSET key to activate
the headset mode in advance.
0-Disabled
It enables or disables the dual headset feature.
0-Disabled
If it is set to 1 (Enabled), the headset mode will
1-Enabled
not
It be deactivated
configures until the
the duration user
time (inpresses
seconds)thefor
HEADSET
the key again.
busy tone. When one party releases the call,
0, 3 or 5 0 If it is set to 1 (Enabled), users can use two N
a busy tone is audible to the other party
headsets on one phone. When the IP phone joins
If it is set to
indicating 0 (Disabled),
that the headset
the call connection mode can
breaks.
in a call, the users with the headset connected to
be deactivated by pressing the Speakerphone key
the
It headset or jack havethe
a full-duplex conversation,
orenables
0-0sthe HEADSET disables
key exceptIP the
phone to
HANDSETplay key.
a key
whilewhen
tone the users
a userwith the headset
presses a send connected
key. to the
0 or 1 1 handset jack are only allowed to listen to. N
3-3s
0-Disabled
5-5s
It enables or disables the IP phone to play a key
1-Enabled
tone when a user presses any key on your phone
0 or 1 1 If it is set to 3 (3s), a busy tone is audible for 3
keypad. N
If it is set to 1 (Enabled), the IP phone will play a
seconds on the IP phone.
key tone when a user presses a send key.
0-Disabled
It configures the ringer device for the IP phone.
0, 1 or 2 0 1-Enabled N
features.key_tone
0-Use Speaker is set to 1 (Enabled).
If it is set to 1 (Enabled), the IP phone will play a
1-Use Headset
key
It tone when
enables a user the
or disables presses any key
IP phone on your
to play a
phone keypad.
warning tone when there is a call on hold.
0 or 1 1 2-Use Headset & Speaker N
0-Disabled
If the ringer device is set to Headset or
Headset&Speaker, the headset should be
1-Enabled
connected to the IP phone and the headset mode
also should be activated in advance.
It configures the interval (in seconds) at which
Integer from 3 the IP phone play a warning tone when there is a
30 call on hold. N
to 3600
If it is set to 30 (30s), the IP phone will play a

It configures the IP phone to continue to play the
warning tone every 30 seconds when there is a
Integer within dial tone after inputting the preset numbers on
Blank call on hold. N
6 digits the pre-dialing screen.
Example:
features.play_hold_tone.enable
It enables or disables the IP phoneistoset to 1an
mute
features.redial_tone = 123
(Enabled).
active call.
0 or 1 1 The IP phone will continue to play the dial tone N
after inputting 123 on the pre-dialing screen.
0-Disabled
If it is left blank, the IP phone will not play the dial
tone
It after or
enables inputting numbers
disables on thewith
the IP phone pre-dialing
active
1-Enabled
screen. to play dial tones differently from the IP
accounts
0 or 1 0 phone with no active accounts. N
0-Disabled
It enables or disables the IP phone to play a local
DTMF tone.
0-Disabled
It configures the "#" or "*" key as the send key.
1-Enabled
0, 1 or 2 1 0-Disabled N
If it is set to 1 (Enabled), you can hear the DTMF
tone when pressing the IP phones keypad during
1-# key
a call.
It enables or disables the IP phone not to send
any pound key when pressing double #.
0 or 1 0 2-* key N
0-Disabled (Send one pound key by pressing
If it is set to 0 (Disabled), neither # nor * can
double #)
beenables
It used asor the send key.
disables the IP phone to play a
warning tone when it receives a new voice mail.
0 or 1 1 1-Enabled (Do not send any pound key when N
If it
It is set to 1the
configures (# interval
key), the(in
pound key is
seconds) forused as
the IP
pressing double #)
the send
0-Disabled
phone to key.
automatically check if any call history
update
Note: Itavailable
works onlyon ifSkype for Business
the value Server.
of the parameter
If it is set to 2 (* key), the asterisk key is used as
1-Enabled
features.key_as_send is set to 1 (Enabled).
1-1000 30 the
If send
it is set key.
to 30 (in seconds), the IP phone will Y
check if any call history update available on the
Skype for Business Server every 30 seconds. If an
It enables
update or disables
is available, thethe phone
phone to download
will synchronize
the
history records from the Exchange Server.
call history.
0 or 1 1 Y
0-Disabled
It enables or disables the history records to
1-Enabled
display the contact avatars.
0 or 1 1 N
If it is set to 0 (Disabled), the IP phone only
0-Disabled
records local histroy.
It enables or disables the IP phone to display
1-Enabled
If it is set
missed to 1from
calls (Enabled), the phone
the response will
group.
0 or 1 0 synchronize history records from the Exchange N
If it is set to 0 (Disabled), the history records do
Server.
0-Disabled
not display contact avatars.
It enables or disables the IP phone to save the
1-Enabled
If it is
call set to 1 (Enabled), the history records
log.
0 or 1 1 display contact avatars. N
If it is set to 1 (Enabled), the IP phone will display
0-Disabled
missed calls from the response group.
It configures the delay time (in seconds) for the IP
1-Enabled
Integer from 1 phone to automatically display the search results
1 on the dialing screen. N
to 10 If it is set to 0 (Disabled), the IP phone cannot log
Ring1.wav, the placed calls, received calls, missed calls and
Ring2.wav, Example: sfb.search_delay_time = 3
the
It forwardedthe
configures calls in the
delay call
time (inlog lists. for the IP
seconds)
Ring3.wav, phone to automatically dial out the entered digits
Integer from 1
Ring4.wav, 8 without pressing a send key. N
to 14
Ring5.wav
Ring6.wav, Note: It works only if the value of the parameter
Ring7.wav, It configures a ring tone for the IP phone.
phone_setting.predial_autodial is set to 1
Ring8.wav, (Enabled).
Ring1.wav Example: N
Silent.wav,
Splash.wav, To configure a phone built-in ring tone (e.g.,
or custom ring Ring1.wav):
tone name phone_setting.ring_type = Ring1.wav
(e.g.,
Customring.wa To configure a custom ring tone (e.g.,
v) Customring.wav):
phone_setting.ring_type = Customring.wav
It configures the access URL of the custom ring
URL within 511 tone file.
Blank N
characters
Example:
ringtone.url =
It deletes all custom ring tone files.
tftp://192.168.1.100/Customring.wav
http://localhost
Blank Example: N
/all
ringtone.delete = http://localhost/all
It enables or disables the live dialpad feature.
0 or 1 0 0-Disabled N
phone to automatically check if any voice mail
1-Enabled
update available on Skype for Business Server.
0-1000 60 If it
If it is
is set
set to
to 60
1 (Enabled), the the
(in seconds), IP phone will will
IP phone Y
automatically
check if any voicedial out
mailthe entered
update phoneon
available number
the
on the for
Skype dialing screen
Business without
Server pressing
every a sendIfkey.
60 seconds. an
It enables
update or disables
is available, the
the IP phone
phone to deal with
will download the
the
voice 180 SIP message received after the 183 SIP
mails.
0 or 1 1 message. N
For T48G IP phones:
The default value is SIP- 0-Disabled
T48G. It enables or disables the IP phone to reset to
For T46G IP phones: factory by long pressing OK key.
T46G. 0-Disabled
If it is set to 1 (Enabled), the IP phone will resume
For T42G IP phones: and
It play the the
configures localproduct
ringback toneofupon
name a phone.
the IP
The default value is SIP- 1-Enabled
String within subsequent
The product 180
name message received.
is displayed on the IP phone at
T42G. the path Menu->System Status->More- N
99 characters
For T41P IP phones: >Phone->Product.
T41P. It enables or disables the power indicator LED to
For T40P IP phones: be turned on.
0 or 1 0 N
T40P. 0-Disabled (power indicator LED is off)
It enables or disables the power indicator LED to
1-Enabled (power indicator LED is solid red)
flash when the IP phone receives a voice mail.
0 or 1 1 N
0-Disabled (power indicator LED does not flash)
1-Enabled (power indicator LED slow flashes
flash when the IP phone receives an incoming
0 or 1 1 (1000ms) red) N
call.

be turned on when the IP phone is busy.
0 or 1 0 1-Enabled (power indicator LED fast flashes N
(300ms) red)
0-Disabled (power indicator LED is off)
1-Enabled (power indicator LED is solid red)
flash when a call is muted.
0 or 1 0 N
1-Enabled (power indicator LED fast flashes
flash when a call is placed on hold or is held.
0 or 1 0 (300ms) red) N
It configures the intensity of the LCD screen when
1-Enabled ( power indicator LED fast flashes
Integer from 1 the phone is active.
8 (500ms) red) N
to 10 10 is the highest intensity.
It configures the LCDs intensity of the
T48G/T46G IP phone and the connected EXP40.
It configures the intensity of the LCD screen when
the phone is inactive.
0 or 1 1 N
0-Off
It configures the contrast of the LCD screen.
1-Low
Integer from 1
6 For T48G/T46G IP phones, it configures the LCDs N
to 10
contrast of the connected EXP40 only.
For T40 IP phones, it configures the LCDs

contrast of the IP phone.
Note: We recommend that you set the contrast

of the LCD screen to 6 as a more comfortable
level.
It configures the user name of the user for
String within phones web user interface access.
user N
32 characters
It configures the user name of the administrator

String within for phones web user interface access.
admin N
32 characters
It configures the password of the user, var and

String within administrator for phones web user interface
Blank access. N
32 characters
The valid value format is username:new
password.
It enables or disables the IP phone to only trust
the server certificates in the Trusted Certificates
0 or 1 1 Example: Y
list.
security.user_password = user:123 means setting
the password of user (current user name is
0-Disabled
user)
It to password
configures the type123.
of certificates in the Trusted
Certificates list for the IP phone to authenticate
0, 1 or 2 2 1-Enabled Y
Note:
for TLSIP phones support ASCII characters 32-
connection.
126(0x20-0x7E) in passwords. You can set the
If it is set to 0 (Disabled), the IP phone will trust
password Certificates
0-Default to be empty via web user interface
the
It server nothe
configures matter
typewhether the certificate
of the device sent
certificates for
only.
by the
the serverto
IP phone is send
valid for
or not.
TLS authentication.
0 or 1 0 1-Custom Certificates Y
If it is set to
0-Default 1 (Enabled), the IP phone will
Certificates
2-All Certificates
authenticate the server certificate based on the
It enables
trusted or disables
certificates the
list. IP phone
Only to mandatorily
when the
1-Custom Certificates
validate the CommonName
authentication succeeds, theorIPSubjectAltName
phone will trustof
0 or 1 0 the Y
the certificate
server. sent by the server.
0-Disabled
It enables or disables the IP phone to reserve
custom certificates after it is reset to factory
defaults.
0-Disabled
URL within 511 trusted certificate used to authenticate the
Blank 1-Enabled N
characters connecting server.
Example:
It deletes all uploaded trusted certificates.
trusted_certificates.url =
http://localhost http://192.168.1.20/tc.crt
Blank Example: N
/all
trusted_certificates.delete = http://localhost/all
Note: The certificate you want to upload must be
in configures
It *.pem, *.crt,
the*.cer or *.der
access format.
URL of the certificate the
URL within 511 IP phone sends for authentication.
Blank N
characters
Example:
server_certificates.url =
It deletes all uploaded server certificates.
http://192.168.1.20/ca.pem
http://localhost/all Blank Example: N
Note: The certificate you want to upload must be
server_certificates.delete = http://localhost/all
in *.pem or *.cer format.
It configures the access URL for the custom
URL within 511 configuration files.
Blank Y
characters
Note: The file format of custom configuration file
must be *.bin.
It enables or disables the IP phone to prompt for
the administrator password when you long press
0 or 1 0 the OK key to perform factory reset on the idle N
screen.
It enables or disables the Import Factory
0-Disabled
Configuration feature.
0 or 1 0 N
1-Enabled
0-Disabled
1-Enabled
URL within 511 factory configuration files.
Blank Y
characters If it is set to 1 (Enabled), Import Factory
Configuration item will be displayed on the IP
features.custom_factory_config.enable is set to
phone's web user interface at the path Settings-
1 (Enabled) and the file format of custom factory
>Configuration. You can import a custom
configuration file must be *.bin.
factory configuration file or delete the user-
defined factory configuration via web user
interface.
It configures the access URL of the firmware file.
URL within 511
Blank Example: Y
characters
firmware.url = http://192.168.1.20/28.8.0.1.rom
It enables or disables the IP phone to be reset to
factory after you upgrade the phone firmware.
0 or 1 0 Y
0-Disabled
It configures the access URL of the local contact
1-Enabled
URL within 511 file (*.xml).or disables the IP phone to display local
It enables
Blank N
characters favorites
Note: this onparameter
the idle screen.
only take effect once. Next
Example:
It configures the order of the firmware,
local favorites on
time you upgrade the phone the phone
local_contact.data.url
the idle
0-Disabledscreen. =
will not be reset to factory.
http://192.168.10.25/contact.xml
0 or 1 1 1-Preferential
1-Enabled N
2-General
If it is set to 0 (Disabled), only Skype for Business
favorites are displayed on the idle screen.
If it is set to 1 (Preferential), the local favorites
1 or 2 1 will be displayed before the Skype for Business N
favorites on the idle screen.
If it is set to 2 (General), the local favorites will be
It enables or disables the IP phone to obtain the
displayed behind the Skype for Business favorites
display name from the email address.
0 or 1 0 on the idle screen. N
0-do not obtain display name from the email
sfb.local_favorite.enable is set to 1 (Enabled).
address
It enables or disables the IP phone to search
contacts according to the entered number.
0 or 1 0 1-obtain display name from the email address Y
0-Disabled
Example:
If it
It is set to 1the
configures (Enabled),
number and the system
of results searched from
1-Enabled
administrator
the Directorydoes menu not assign
when youaperform
display name to
a search.
0-1000 20 an account, the IP phone will obtain the display N
If it is set to 0 (disabled), the IP phone will search
name (John)
Note: fromshould
The value his email addressthan the
be greater
contacts according to the entered numbers.
([email protected]).
amount of search results in one page. Otherwise,
It configures the number of results searched from
the directory will display search results according
If it is
the set to 1Active
Microsoft (Enabled), the IPwhen
Directory phoneyouwill search
perform
0-1000 20 to the default value. N
contacts
a search.according to the dial plan that is
associated with the entered numbers. The dial
For T48G/T46G IP Example: If you set to 3, (a page of T46G phone
plan is set on the Skype for Business Server.
phones: can
It display 5the
configures search results
number by default),
of results thenfrom
searched the
The default value is 30. search
the results
Outlook will be 20
Directory rather
when youthan 3. a search.
perform
0-1000 N
For T42G/T41P/T40P IP
phones: It enables or disables the IP phone to synchronize
The default value is 20. outlook contacts from the Exchange Server.
0 or 1 1 Y
0-Disabled
It enables or disables the IP phone to search for
1-Enabled
all Skype for Business users.
0 or 1 1 It configures the interval (in minutes) for the IP N
phone to automatically check if any outlook
0-Disabled
contacts update available on Skype for Business
Server.
1-Enabled
0-100 5 Y
If it is set to 5 (in minutes), the IP phone will
check if any outlook contact update available on
the Skype for Business Server every 5 minute. If
anconfigures
It update is available,
the PIN of the phone will download
CAP phone. The PIN is
String length
Blank the
usedoutlook contacts.
to enter the Advanced menu on the phone. N
from 6 to 15
It enables or disables the calendar feature.

0 or 1 1 0-Disabled Y
phone to automatically check if any calendars
1-Enabled
update available on Skype for Business Server.
0-1000 60 If it
If it is
is set
set to
to 60
1 (Enabled), user
(in seconds) canIPuse
, the calendar
phone will Y
feature
check if onanythecalendar
IP phone.update available on the
If it is set
Skype for to 0 (Disabled),
Business Serveruser
everycannot use
60 seconds. If an
calendar
update is feature on the
available, the phone
IP phone.
will download the
calendars.
It configures the inactive time (in minutes) of the
IP phone, after which the phone will change its
status to Inactive automatically.
Example:
Integer from 5 It configures the inactive time (in minutes) of the
5 If it is set to 5, the IP phone will change its status Y
to 360 IP phone, after which the phone will change its
to Inactive automatically when inactive time
status
It enablesfromorInactive
disablestothe
Away automatically.
IP phones to play key
reaches 5 minutes.
tone in following situations:
Example:
Integer from 5 Note: If you change this parameter, the IP phone
5 If it is
For set to 5, the IP phone whose status
T48G/T46G/T42G/T41P/T40P is
IP phones: Y
to 360 will reboot to make the change take effect.
Inactive
Enter will change
phone numbers towithout
Away automatically
picking up theafter 5
minutes.
handset.
Note:
For If you
T48G IPchange
phones:this parameter, the IP phone
0 or 1 0 N
will reboot
Tap Searchtoicon
make the change
to enter take effect.
the pre-dialing screen,
and then enter phone numbers without picking
up the handset.
It configures the codec for multicast paging.
PCMU,
PCMA,
G722 0-Disabled
Example: N
G729,
G722 multicast.codec = G722
1-Enabled
It enables or disables the IP phone to handle the
incoming multicast paging calls when there is an
0 or 1 1 active multicast paging call on the IP phone. N
0-Disabled
It configures the priority of the voice call (a
Integer from 0 normal phone call rather than a multicast paging
10 1-Enabled N
to 10 call) in progress.
If it is set to 0 (Disabled), the IP phone will ignore
the
It incomingthe
configures multicast
label topaging calls when
be displayed on thethere
LCD is
0-Disabled
String within an active
screen whenmulticast
receiving paging call on thepaging
the multicast IP phone.
calls.
Blank 1-1 N
99 characters 2-2
If it is set to 1 (Enabled), the IP phone will receive
Example:
3-3
the incoming multicast paging call
multicast.listen_address.1.label with a higher
= Paging1
4-4
It configures the multicast address
priority and ignore that with a lowerand port
priority.
IP address: 5-5
number that the IP phone listens to.
Blank 6-6 N
port
7-7
Example:
8-8
multicast.listen_address.1.ip_address =
It
9-9configures the IP address and port number of
224.5.6.20:10008
the
10-10 multicast paging group in the paging list. It
String Blank will be displayed on the LCD screen when placing N
Note: The valid multicast IP addresses range
the multicast paging call.
from 224.0.0.0 to 239.255.255.255.
If it
It is set to 0the
configures (Disabled),
name of all theincoming
multicastmulticast
paging
Example:
pagingtocalls will be automatically ignored
group be displayed in the paging list. It when
will bea
String Blank multicast.paging_address.1.ip_address
voice call is = N
displayed oninthe
progress.
LCD screen when placing the
224.5.6.20:10008
multicast paging calls.
multicast.paging_address.2.ip_address
If it is not set to 0(Disabled), the IP phone = will
224.1.6.25:1001
It configures the play time of local
receive the incoming multicast paging call with ringback tonea
Example:
before
It enablesplaying the
or disables other
the party's
phonethiscoloring
to ringback
0-180000ms 500ms higher or same priority
multicast.paging_address.1.label than =record
value and
Product ICE log.
ignore N
Note:
tone
that with The
when aa valid
call multicast
lower is placed.
priority IP addresses
than this valuerangewhen a
from
voice224.0.0.0
0-Disabled to 239.255.255.255.
call is in progress.
Example:
features.local_ringback_tone_time
1-Enabled = 500
0 or 1 0 The IP phone will play a 500ms local ringback N
tone
If it isbefore
set to playing the other
1 (Enabled), party's log
the system coloring
will
It enablestone
ringback or disablesathe IP is
phone to mandatorily
include the ICEwhenlog. call placed.
validate the CommonName or SubjectAltName of
the certificate sent by the server.
If it is set to 0 (Disabled), the system log will not
0 or 1 1 N
include the ICE log.
0-Disabled
It enables or disables the IP phone to obtain the
Skype for Business Server address via
1-Enabled
Autodiscover service.
0 or 1 1 N
0-Disabled
It enables or disables the IP phones to complete
automated functional test using Microsoft
1-Enabled
automated testing tools.
0 or 1 0 N
0-Disabled
It enables or disables the IP phone to select

1-Enabled
transfer-to party's call (a new call or another
0 or 1 1 existing call) during multiple calls when user N
presses the Tran soft key.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the user can select to

transfer the active call to a new call or another
It configures the sending volume of the speaker.
Integer from
0 Note: We recommend that you modify this Y
-50 to 50
parameter cautiously. An unreasonable value may
render the voice quality bad.
It
It configures
enables or the sending
disables the volume
IP phoneofto
the handset.
offer MKI
Integer from crypto in the SDP offer.
0 Note: We recommend that you modify this Y
-50 to 50
parameter cautiously.
For secure audio An unreasonable
communciations, value
Yealink may
phones
render
offer the voice
support for quality
the bad.
crypto header with and
It configures the sending volume of the headset.
without MKI in the offer SDP. The master key
Integer from
0 identifier
Note: We(MKI) is an optional
recommend parameter
that you to
modify this Y
-50 to 50
include
parameterthecautiously.
crypto header in the SDP that
An unreasonable value may
uniquely
render the identifies the SRTP
voice quality bad.stream within an
SRTP session. The far end can choose to include a
crypto with or without MKI.
0 or 1 1 N
0-Disabled
It enables or disables the Music On Hold feature
1-Enabled
when placing an active call on hold.
0 or 1 0 N
If it is set to 1 (Enabled), the IP phone offers one
0-Disabled
MKI crypto in the SDP offer.
It configures the Server URL for device pairing, so
1-Enabled
URL within that
If it isyou
setcan
to 0sign into the the
(Disabled), phone using offers
IP phone Web Sign-
one
https://bootstrap.pinauth.services.skypeforbusiness.com/
in method. N
512characters non-MKI crypto in the SDP offer.
If it is set to 1 (Enabled), the IP phone will play
built -in music when placing an active call on
Example:
hold.
It enables or disables the IP phone to display a
features.device_pairing.url=
directory called Outlook Contacts. This directory
0 or 1 0 https://bootstrap.pinauth.services.skypeforbusine N
will include your Outlook contacts.
ss.com/
0-Disabled
It configures the maximum outlook contacts that
can be downloaded from the Exchange Server.
1-5000 100 1-Enabled Y
For T48G/T46G IP phones:
The maximum value is 500.
It configures the maximum history records that
can be downloaded from the Exchange Server.
1-5000 100 For T42G/T41P IP phones: Y
For T48G/T46G/T42G/T41P IP phones:
For
It T40P IP the
configures phones:
maximum voice mails that can
Thedownloaded
be maximum value
from is
the100.
Exchange Server.
1-5000 100 For T40P IP phones: Y
The
It maximum
enables value isthe
or disables 100.
IP phone to display
scrolling user name
For T48G/T46G when user name is more that
IP phones:
It enables
15 or disables the screen.
phone to display name
Thecharacters
maximumon the is
value idle
500.
that has up to 15 characters.
0 or 1 0 Y
For T42G/T41P/T40P IP phones:
0-Disabled
0-Disabled
1-Enabled
1-Enabled
0 or 1 0 Y
If it is set to 1 (Enabled), the IP phone will display
scrolling user name when it is more that 15
It enables or
characters ondisables
the idlethe user to sign into the
screen.
phone using User Sign-in method.
0 or 1 1 N
If it is set to 0 (Disabled), ellipsis will replace the
0-Disabled
rest user name when user name is more that 15
characters
It enables or ondisables
the idlethe
screen.
user to sign into the
1-Enabled
phone via PC.
0 or 1 1 N
0-Disabled
It enables or disables the user to sign into the
1-Enabled
phone using PIN Authentication method.
0 or 1 1 N
Note: If it is set to 1 (Enabled), make sure your
0-Disabled
phone has paired with the Skype for Business
client
It using
enables orBToE software,
disables so that
the user youinto
to sign canthe
sign
1-Enabled
into theusing
phone phone viaSign-in
Web PC. method.
0 or 1 1 Y
0-Disabled
1-Enabled
it enables or disables the line key LED indicator
on the phone to monitor the status of the Skype
for Business favorites.
0-Disabled
It enables or disables the EXP key indicator LED
on the expansion module to monitor the status of
1-Enabled
the Skype for Business contacts.
0 or 1 1 N
If it is set to 0 (Disabled), the line key LED
0-Disabled
indicators corresponding to your Skype for
Business favorites are off.
1-Enabled
0 or 1 1 If it is set to 0 (Enabled), the line key LED N
If it is set to 0 (Disabled), the EXP key LED
indicators vary depending on the status of your
indicators corresponding to your Skype for
Skype for Business favorites.
Business
It enablescontacts are the
or disables off. IP phone to be
automatically configured via Redirection and
0 or 1 1 If it is set to 0Server
Provisioning (Enabled),
(RPS)thewhenEXP key
the LED are
phones N
indicators
first powered vary depending on the status of your
up.
Skype for Business contacts.
It enables or disables the Redirection and
0-Disabled
Provisioning Server (RPS) method to be the
0 or 1 0 highest priority when provisioning the IP phone N
1-Enabled
Ring1.wav, automatically.
Ring2.wav, It enables or disables the IP phone to set a
Ring3.wav, 0-Redirection and Provisioning Server (RPS)
separate ring tone for the private line.
0 or 1
Ring4.wav, 1 method has the lowest priority when provisioning N
Ring5.wav the IP phone automatically.
0-Disabled
Ring6.wav,
Ring7.wav, 1-Redirection
It configures aand ringProvisioning
tone for theServer
private(RPS)
line.
1-Enabled
Ring8.wav, method has the highest priority when
Ring7.wav provisioning the IP phone automatically.
Example: N
Silent.wav, If it is set to 1 (Enabled), a separate ring tone can
Splash.wav, To configure a phone built-in ring tone (e.g.,
be assigned to the private line.
or custom ring Ring1.wav):
It configures the code name to trigger auto
tone name phone_setting.ring_type = Ring1.wav
String within If it is set to 0 (Disabled), a separate ring tone
provisioning.
(e.g., Blank cannot be assigned to the private line. The Y
64 characters To configure a custom ring tone (e.g.,
Customring.wa private line will use the phone ring tone.
v) Customring.wav):
phone_setting.ring_type
It configures the activation = Customring.wav
code to trigger auto
provisioning.
String Blank Y
The activation code can be numeric characters,
special characters # * or a combination of them.
It configures the access URL of the provisioning
URL within 511 server for the IP phone to perform auto
Blank Example: Y
characters provisioning which is triggered by activation
autoprovision.1.code = 123
code.
autoprovision.2.code = **
autoprovision.3.code
It configures the user = *123for authentication
name
String within during auto provisioning which is triggered by
Blank activation code. Y
64 characters
It configures the password for authentication

String within during auto provisioning which is triggered by
Blank activation code. Y
32 characters

the Common CFG file.
16 characters Blank Y
If it is configured, it has a higher priority than the
value configured in the parameter
auto_provision.aes_key_16.com.
the MAC-Oriented CFG file.
16 characters Blank Y
If it is configured, it has a higher priority than the
value configured in the parameter
auto_provision.aes_key_16.mac.
t do not support
Phone User Interface

Web User Interface
T42G/T41P/T40P T48G/T46G
Security->License->Upload
/ /
License File
Features->General
/ /
Information->DHCP Hostname
Menu->Advanced-
Network->Basic->IPv4 Config- >Network->WAN Port-
/
>PPPoE->User Name >IPv4->Type(PPPoE)-
>PPPoE User
Menu->Advanced-
Network->Basic->IPv4 Config- >Network->WAN Port-
/
>PPPoE->Password >IPv4->Type(PPPoE)-
>PPPoE Password
Network->PC Port->PC Port

/ /
Active
Network->Advanced->Port
/ /
Link->WAN Port Link
Network->Advanced->Port
/ /
Link->PC Port Link
Menu->Settings->Advanced Menu->Advanced-
Network->Basic->IPv4 Config- Settings->Network->WAN Port- >Network->WAN Port-
>Static DNS >IPv4->DHCP IPv4 Client->Static >IPv4->Type(DHCP)-
DNS >Static DNS
Network->Basic->IPv6 Config- Settings->Network->WAN Port- >Network->WAN Port-
>IPv6 Static DNS >IPv6->DHCP IPv6 Client->Static >IPv6->Type(DHCP)-
DNS >Static DNS
/ / /
Network->Advanced->VLAN-
Settings ->Network->VLAN- >Network->VLAN->WAN
>WAN Port->Active
>WAN Port->VLAN Status Port->VLAN Status
Settings->Network->VLAN->WAN >Network->VLAN->WAN
>WAN Port->VID (1-4094)
Port->VID Port->VID Number
Settings->Network->VLAN->WAN >Network->VLAN->WAN
>WAN Port->Priority
Port->Priority Port->Priority
Settings->Network->VLAN->PC >Network->VLAN->PC
>PC Port->Active
Port->VLAN Status Port->VLAN Status
>PC Port->VID (1-4094)
Port->VID Port->VID Number
>PC Port->Priority
Port->Priority Port->Priority
Settings ->Network->VLAN- >Network->VLAN->DHCP
>DHCP VLAN->Active
>DHCP VLAN->DHCP VLAN VLAN->DHCP VLAN
Settings->Network->VLAN- >Network->VLAN->DHCP
>DHCP VLAN->Option (1-255)
>DHCP VLAN->Option VLAN->Option
For T48G IP phones:
Menu->Advanced-
>Network->Web Server-
Menu->Settings->Advanced
Network->Advanced->Web >HTTP Port
Settings->Network->Webserver
Server->HTTP Port (1~65535) For T46G IP phones:
Type->HTTP Port For T48G IP phones:
Menu->Advanced-
Menu->Advanced-
>Network->Webserver
Menu->Settings->Advanced Type->HTTP Port
Network->Advanced->Web >HTTPS Port
Server->HTTPS Port (1~65535) For T46G IP phones:
Type->HTTPS Port For T48G IP phones:
Menu->Advanced-
Menu->Advanced-
>Network->Webserver
Menu->Settings->Advanced Type->HTTPS Port
Network->Advanced->Web >HTTPS Status
Server->HTTPS For T46G:
Type->HTTPS Status For T48G IP phones:
Menu->Advanced-
Menu->Advanced-
>Network->Webserver
Menu->Settings->Advanced Type->HTTPS Status
Network->Advanced->Web >HTTP Status
Server->HTTP For T46G IP phones:
Type->HTTP Status
Menu->Advanced-
>Network->Webserver
Type->HTTP Status
Network->Advanced->Voice
/ /
QoS->Voice QoS (0~63)
Network->Advanced->Voice
/ /
QoS->SIP QoS (0~63)
Network->Advanced->802.1x-
Settings->Network->802.1x >Network->802.1x-
>802.1x Mode
Settings->802.1x Mode >802.1x Mode
Settings->Network->802.1x >Network->802.1x-
>Identity
Settings->Identity >Identity
Settings->Network->802.1x >Network->802.1x->MD5
>MD5 Password
Settings->MD5 Password Password
/ /
>CA Certificates
/ /
>Device Certificates
Network->Advanced->LLDP-
Settings->Network->LLDP->LLDP >Network->LLDP->LLDP
>Active
Status Status
Network->Advanced->LLDP-
Settings->Network->LLDP- >Network->LLDP->Packet
>Packet Interval (1~3600s)
>Packet Interval Interval
Network->Advanced->CDP-
Settings->Network->CDP->CDP >Network->CDP->CDP
>Active
Status Status
Network->Advanced->CDP-
Settings->Network->CDP- >Network->CDP->Packet
>Packet Interval (1~3600s)
>Packet Interval Interval
Network->Advanced->Span to
/ /
PC->Span to PC Port
Settings->Configuration-
/ /
>Export System Log
/ /
>Server Name
/ /
>Global log Level
Settings->Auto Provision-
/ /
>Power On
/ /
>DHCP Active
/ /
>Custom Option(128~254)
/ /
>DHCP Option Value
/ /
>Repeatedly
/ /
>Interval(Minutes)
/ /
>Weekly
Settings->Auto Provision->Day
/ /
of Week
/ /
>Time
/ /
>Time
/ /
>Server URL
/ /
>User Name
/ /
>Password
/ / /
/ / /
/ /
>Common AES Key
/ /
>MAC-Oriented AES Key
/ / /
Settings->Preference->Watch
/ /
Dog
Settings->Voice->Echo
/ /
Cancellation ->VAD
/ /
Cancellation ->CNG
Cancellation->ECHO / /
Settings->Voice->JITTER
/ /
BUFFER->Type
/ /
BUFFER->Min Delay
/ /
BUFFER->Max Delay
/ /
BUFFER->Normal
Settings->Tones->Select
/ /
Country
Settings->Tones->Dial / /
Settings->Tones->Ring Back / /
Settings->Tones->Busy / /
Settings->Tones->Congestion / /
Settings->Tones->Call Waiting / /
Settings->Tones->Dial Recall / /
Settings->Tones->Info / /
Settings->Tones->Stutter / /
Settings->Tones->Auto Answer / /
Settings->Preference->Languag/ /
Menu->Settings->Basic Settings-
/ Menu->Basic->Language
>Language
/ / /
/ / /
/ / /
/ / /
Settings->Dial Plan->Dial-now-
/ /
>Rule
/ / /
Features->General
Information->Time-Out for / /
Dial-Now Rule
/ / /
/ / /
Features->General
Information->Return Code / /
When Refuse
Features->General
Information->Auto-Answer / /
Delay(1~4s)
Features->General
Information->Call Number / /
Filter
Features->General
Information->Auto-Logout / /
Time(1~1000min)
Account->Basic->Account Lock
Settings->Account Lock >Account Lock
Account->Basic->Always On Menu->Settings->Basic Settings- Menu->Basic->Always

Line >Always Online Online->Always Online
Features->General
Information- / /
>Diversion/History-Info
Features->General
Information->Remember / /
Password
/ / /
/ / /
Features->General Menu->Features->Hotline->Hot Menu->Features->Hotline-

Information->Hotline Number Number >Hot Number
Features->General
Menu->Features->Hotline->Hot Menu->Features->Hotline-
Information->Hotline
Line Delay >Hot Line Delay
Delay(0~10s)
Features->Bluetooth-> Menu->Basic->Bluetooth-
/
Bluetooth Active >Bluetooth
Menu->Basic->Bluetooth-
>Bluetooth (On)->Edit My
/ /
Device Information-
>Device Name
Features->General Menu->Features->Call Waiting- Menu->Features->Call

Information->Call Waiting >Call Waiting Waiting->Call Waiting
Features->Audio->Call Waiting Menu->Features->Call Waiting- Menu->Features->Call

Tone >Play Tone Waiting->Play Tone
Menu->Basic->Phonce
Menu->Settings->Basic Settings-
Settings->Phone Lock Lock->Phonce Lock->Lock
>Phonce Lock->Phonce Lock
the phone
Menu->Features->BToE-
Settings->BToE->BToE Menu->Features->BToE->BToE
>BToE
Menu->Features->BToE->BToE Menu->Features->BToE-
Settings->BToE->BToE paring
Paring Mode >BToE Paring Mode
Features->Audio->BToE as
/ /
Audio Device (VDI support)
/ / /
/ / /
Features->Remote Control-
/ /
>Action URI allow IP List
Features->General information
/ /
->Update Checking Time
Features->General information
/ /
->E911 Location Tip
Features->General
Information->Suppress DTMF / /
Display
Features->General
Information->Suppress DTMF / /
Display Delay
Features->General
/ /
Information->DTMF Repetition
Features->General
Information->DTMF Replace / /
Tran
Features->General
/ /
Information->Tran Send DTMF
Features->General
Information->Use DHCP Option / /
120
/ / /
/ / /
Features->General
/ /
Information->Headset Prior
Features->General
/ /
Information->Dual-Headset
Features->General
Information->Busy Tone Delay / /
(Seconds)
Features->Audio->Send Sound / /
Features->Audio->Key Tone / /
Features->Audio->Ringer
/ /
Device for Headset
Features->General
/ /
Information->Play Hold Tone
Features->General
Information->Play Hold Tone / /
Delay
Features->Audio->Redial Tone / /
Features->General
/ /
Information->Allow Mute
/ / /
Features->General
Information->Play Local DTMF / /
Tone
Features->General Menu->Features->Key as
Menu->Features->Key as send
Information->Key As Send Send
Features->General
/ /
Information->Send Pound Key
Features->General
/ /
Information->Voice Mail Tone
/ / /
/ / /
Features->General
Menu->Features->History
Information->History Record /
Setting>Contacts Avatar
Contacts Avatar
/ / /
Features->General Menu->Features->History Menu->Features->History

Information->Save Call Log Setting->History Record Setting->History Record
Features->General
Information->Dial Search / /
Delay
/ / /
Settings->Preference->Ring Menu->Settings->Basic Settings- Menu->Basic->Sound-

Type >Ring Tones >Ring Tones
Settings->Preference->Upload
/ /
Ringtone
/ / /
Settings->Preference->Live
/ /
Dialpad
/ / /
Features->General
Information->180 Ring / /
Workaround
/ / /
Menu->System Status->More- Menu->Status->Phone-

/
>Phone->Product >Product Name
Features->LED->Common
/ /
Power Light On
Features->LED->Voice Mail
/ /
Power Light Flash
Features->LED->Ringing
/ /
Power Light Flash
Features->LED->Talk/Dial
/ /
Power Light On
Features->LED->Mute Power
/ /
Light Flash
Features->LED->Hold/Held
/ /
Power Light Flash
Menu->Basic->Display-
Settings->Preference-
/ >Backlight->Backlight
>Backlight Active Level
Active Level
Settings->Preference- Menu->Basic->Display-
/
>Backlight Inactive Level >Backlight->Inactive Level
Menu->Settings->Basic Settings- Menu->Basic->Display-

/
>Display->Contrast >Contrast
/ / /
/ / /
Security->Password / /
Security->Trusted Certificates-
>Only Accept Trusted / /
Certificates
/ /
>CA Certificates
Security->Server Certificates-
/ /
>Device Certificates
/ /
>Common Name Validation
/ / /
/ /
>Load trusted certificates file
/ / /
Security->Server Certificates-
/ /
>Load server cer file
/ / /
Settings->Configuration->
/ /
Export or Import Configuration
/ / /
/ / /
/ /
>Import Factory Configuration
Settings->Upgrade->Select
/ /
and Upgrade Firmware
/ / /
Directory->Local Directory-
/ /
>Import Local Contact File
Directory->Settings->Local
/ /
Favorite
Directory->Settings->Local
/ /
Favorite
/ / /
/ / /
/ / /
/ / /
/ / /
/ / /
/ / /
/ / /
Sign in->PIN Authentication- Sign in->PIN

/ >Extension->Extension PIN- Authentication->extension-
>New PIN >PIN->New PIN
/ / /
/ / /
Features->General
Information->SFB Inactive / /
Time
Features->General
/ /
Information->SFB Away Time
Features->Audio->Pre Dial
/ /
Tone
Features->General
/ /
Information->Multicast Codec
Directory->Multicast IP-
/ /
>Paging Priority Active
/ /
>Paging Barge
/ /
>Multicast Listening->Label
>Multicast Listening- / /
>Listening Address
Directory->Multicast IP- Menu->Features->Paging List- Menu->Features->Paging

>Paging List->Paging Address >Option->Edit->Address List->Edit->Address
Directory->Multicast IP- Menu->Features->Paging List- Menu->Features->Paging

>Paging List->Label >Option->Edit->Label List->Edit->Label
/ / /
/ / /
/ /
>Common Name Validation
/ / /
Features->General
Information->Enable SFB / /
Automation
Features->General
Information->Allow Trans Exist / /
Call
/ / /
/ / /
/ / /
/ /
/ / /
/ / /
/ / /
/ / /
/ / /
/ / /
/ / /
/ /
/ / /
/ / /
/ / /
Features->General
/ /
Information->Web Sign in
Features->LED-> Line Key Led
/ /
Light On
Features->LED->Exp Led Light

/ /
On
/ / /
/ / /
/ / /
Settings->Preference->Private Menu->Settings->Basic Settings- Menu->Basic->Sound-

line ring >Ring Tones->Private Line Tones >Private Line Tones
/ / /
/ / /
/ / /
/ / /
/ / /
/ / /
/ / /
Further Reference
http://support.yealink.com/documentFront/forwardToDocumentF
rontDisplayPage
Yealink Skype for Business HD IP Phones Administrator Guide


Yealink Skype for Business HD IP Phones Auto Provisioning Guide

Yealink Configuration Encryption Tool User Guide



/




/
/
/
Using Security Certificates on Yealink IP Phones


/
Time Zone
-11
-10
-9:30
-9
-8
-7
-6
-5
-4:30
-4
-3:30
-3
-2:30
-2
-1
+1
+2
+3
+3:30
+4
+4:30
+5
+5:30
+5:45
+6
+6:30
+7
+8
+8:45
+9
+9:30
+10
+10:30
+11
+11:30
+12
+12:45
+13
+13:30
+14
Time Zone Name
Samoa
United States-Hawaii-Aleutian, United States-Alaska-Aleutian
French Polynesia
United States-Alaska Time
Canada(Vancouver,Whitehorse), Mexico(Tijuana,Mexicali), United States-Pacific Time
Canada(Edmonton,Calgary), Mexico(Mazatlan,Chihuahua), United States-MST no DST, United
States-Mountain Time
Canada-Manitoba(Winnipeg), Chile(Easter Islands), Mexico(Mexico City,Acapulco), United States-
Central Time
Bahamas(Nassau), Canada(Montreal,Ottawa,Quebec), Cuba(Havana), United States-Eastern Time
Venezuela(Caracas)
Canada(Halifax,Saint John), Chile(Santiago), Paraguay(Asuncion), United Kingdom-
Bermuda(Bermuda), United Kingdom(Falkland Islands), Trinidad&Tobago
Canada-New Foundland(St.Johns)
Argentina(Buenos Aires), Brazil(DST), Brazil(no DST), Denmark-Greenland(Nuuk)
Newfoundland and Labrador
Brazil(no DST)
Portugal(Azores)
Denmark-Faroe Islands(Torshavn), GMT, Greenland, Ireland(Dublin), Morocco,
Portugal(Lisboa,Porto,Funchal), Spain-Canary Islands(Las Palmas), United Kingdom(London)
Albania(Tirane), Austria(Vienna), Belgium(Brussels),Caicos, Chad, Croatia(Zagreb), Czech

Republic(Prague), Denmark(Kopenhagen), France(Paris), Germany(Berlin), Hungary(Budapest),
Italy(Rome), Luxembourg(Luxembourg), Macedonia(Skopje), Namibia(Windhoek),
Netherlands(Amsterdam), Spain(Madrid)
Estonia(Tallinn), Finland(Helsinki), Gaza Strip(Gaza), Greece(Athens), Israel(Tel Aviv),

Jordan(Amman), Latvia(Riga), Lebanon(Beirut), Moldova(Kishinev), Romania(Bucharest),
Russia(Kaliningrad), Syria(Damascus), Turkey(Ankara), Ukraine(Kyiv, Odessa)
East Africa Time, Iraq(Baghdad), Russia(Moscow)
Iran(Teheran)
Armenia(Yerevan), Azerbaijan(Baku), Georgia(Tbilisi), Abu Dhabi, Kazakhstan(Aktau),
Russia(Samara)
Afghanistan(Kabul)
Kazakhstan(Aqtobe), Kyrgyzstan(Bishkek), Pakistan(Islamabad), Russia(Chelyabinsk)
India(Calcutta)
Nepal(Katmandu)
Kazakhstan(Astana, Almaty), Russia(Novosibirsk,Omsk)
Myanmar(Naypyitaw)
Russia(Krasnoyarsk), Thailand(Bangkok)
Australia(Perth), China(Beijing), Russia(Irkutsk, Ulan-Ude), Singapore(Singapore)
Eucla
Japan(Tokyo), Korea(Seoul), Russia(Yakutsk,Chita)
Australia(Adelaide), Australia(Darwin)
Australia(Brisbane), Australia(Hobart), Australia(Sydney,Melboume,Canberra), Russia(Vladivostok)
Australia(Lord Howe Islands)

New Caledonia(Noumea), Russia(Srednekolymsk Time)
Norfolk Island
New Zealand(Wellington,Auckland), Russia(Kamchatka Time)
New Zealand(Chatham Islands)
Tonga(Nukualofa)
Chatham Islands
Kiribati

Yealink Skype For Business Edition HD IP Phones Description of Configuration Parameters in CFG Files V8.50

Uploaded by

Copyright:

Available Formats

Yealink Skype For Business Edition HD IP Phones Description of Configuration Parameters in CFG Files V8.50

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Yealink Skype For Business Edition HD IP Phones Description of Configuration Parameters in CFG Files V8.50

Uploaded by

Copyright:

Available Formats

Auto Provision Configuration files

1. Add the following paramters:

2. Add the following paramters:

String within 128

String within 128

String within 128

local_time.time_zone Y -11 to +14

Integer from -300

URL within 511

network.ipv6_internet_port.ip Y IPv6 address

IPv6 network.ipv6_internet_port.gateway Y IPv6 address

network.ipv6_primary_dns Y IPv6 address

network.ipv6_secondary_dns Y IPv6 address

network.internet_port.ip Y IPv4 address

network.internet_port.mask Y Subnet Mask

network.internet_port.gateway Y IPv4 address

network.primary_dns Y IPv4 address

network.secondary_dns Y IPv4 address

: y000000000036.cfg T40P: y000000000054.cfg

Default Value Description Reboot

8-device pairing authentication

Phone User Interface

Web User Interface

Account->Register- Sign in->User Sign-in- Sign in->User Sign-in->Sign-in

Account->Register- Sign in->User Sign-in- Sign in->User Sign-in->User

Account->Register- Sign in->User Sign-in-

Account->Basic->Auto Menu->Features->Auto Menu->Features->Auto Answer-

Settings->Time & Date-

Settings->Time & Date-

Settings->Time & Date-

Settings->Time & Date-

Settings->Time & Date-

Settings->Time & Date-

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones

Yealink Skype for Business HD IP Phones