Yealink Microsoft Skype For Business Edition IP Phones Description of Configuration Parameters in CFG Files V8.21

Auto Provision Configuration files
Version
V8.21
Auto Provision Configuration files
Summary of Changes
1. Add newly released SIP-T46G, SIP-T42G, SIP-T41P, SIP-T40P IP phones. And

SIP-T22/T22P IP phones are removed from version 8.
2. Add the following paramters:

wui_lang.url
wui_lang.delete
sip.lync_check_sn.enable
sip.lync_automation.enable
sip.ice_syslog.enable
sip.ice.network_traversal_type
sip.auto_discover_get_lync_server.enable
sfb.update_time
sfb.search_delay_time
sfb.presence.inactive_time
sfb.presence.away_time
sfb.pre_dial_tone.enable
sfb.phone_lock.enable
sfb.local_favorite.sort
sfb.local_favorite.enable
sfb.calendar.enable
sfb.always_online.enable
sfb.account_lock.enable
sfb.E911_location_tip
local_time.manual_ntp_srv_prior
local_contact.data.url
features.voice_mail_tone_enable
features.local_ringback_tone_time=
features.custom_factory_config.enable
features.action_uri_limit_ip
dialplan_dialnow.url
custom_factory_configuration.url
account.1.phone_lock.pin
multicast.codec
multicast.listen_address.X.ip_address
multicast.listen_address.X.label
multicast.paging_address.X.ip_address
multicast.paging_address.X.label
multicast.receive_priority.enable
multicast.receive_priority.priority
transfer.multi_call_trans_enable
phone_setting.contrast
features.reset_by_long_press_enable
sip.btoe.secure_pin
features.device_pairing_for_online.enable
3. Delete the following paramters:

phone_setting.rtcp_xr_report.enable
phone_setting.lcd_logo.mode
wui_lang_note.url
network.snmp.trust_ip
network.snmp.port
network.snmp.enable
network.pc_port.mask
network.pc_port.ip
network.pc_port.dhcp_server
network.dhcp.start_ip
Date
May. 2016
NO.
1
Description
If you want to reset the configuration of a parameter, set the value of the parameter to !NULL! or %NULL%. For example, local_t
%NULL%. After the auto provisioning process is completed, the NTP server 1 will be reset to cn.pool.ntp.org.
Description of Configuratio
Y: All Skype for Business phones support N: All Skype for Business phones donot support Y(): Only Skype for Business ph
The name of the Common CFG file for each model is shown below:
T48G: y000000000035.cfg T46G: y000000000028.cfg T42G: y000000000029.cfg T41P: y000000000036.cfg
T48G/T46G/T42G/ Permitted
Function Parameter
T41P/T40P Value
String within 128

account.sign_in.server_address Y
characters
String within 128

account.sign_in.user_name Y
characters
String within 128

Account account.sign_in.password Y
characters
String within 99
account.sign_in.pin_number Y
characters
String within 99
account.sign_in.pin_password Y
For characters
T48G/T46G/T42G
/T41P:
G722, PCMA,
account.1.codec.Y.enable Y PCMU, 0G729,
or 1
G726-16, G726-24,
G726-32, G726-40,
iLBC, G723_53,
G723_63
account.1.codec.Y.payload_type Y
For T40P:
Audio Codec G722, PCMA,
(Y ranges from 1 to 11) PCMU, G729,
G726-16, G726-24,
Integer from 0 to
account.1.codec.Y.priority Y G726-32, G726-40,
11
iLBC
Integer
account.1.codec.Y.rtpmap Y from 0 to 127
account.1.auto_answer Y 0 or 1
Advanced
account.1.missed_calllog Y 0 or 1
account.1.voice_mail.skin_pin.enable Y 0 or 1
Common,
Ring1.wav,
ICE account.1.ice.candidate_type Y 0,1,2,3 or 4
Ring2.wav,
Ring3.wav,
Ring4.wav,
Ring5.wav,
Ring6.wav,
alert_info account.1.ringtone.ring_type Y
Ring7.wav,
Ring8.wav,
Silent.wav,
Splash.wav,
local_time.time_zone Y or-11
custom ring
to +14
tone name (e.g.,
Customring.wav)
String within 32
local_time.time_zone_name Y
characters
IP address or
local_time.ntp_server1 Y
domain name
IP address or
local_time.ntp_server2 Y
domain name
Integer from 15 to
local_time.interval Y
86400
local_time.summer_time Y 0, 1 or 2
local_time.dst_time_type Y 0 or 1
local_time.start_time Y Time
Time
local_time.end_time Y Time
Integer from -300

local_time.offset_time Y
to 300
local_time.time_format Y 0 or 1
local_time.date_format Y 0, 1, 2, 3, 4, 5 or 6
local_time.dhcp_time Y 0 or 1
local_time.manual_time_enable Y 0 or 1
local_time.manual_ntp_srv_prior Y 0 or 1
URL within 511

auto_dst.url Y
characters
IP Mode network.ip_address_mode Y 0, 1 or 2
Integer from 0 to
network.ipv6_prefix Y
128
network.ipv6_internet_port.type Y 0 or 1
network.ipv6_internet_port.ip Y IPv6 address
IPv6 network.ipv6_internet_port.gateway Y IPv6 address
network.ipv6_primary_dns Y IPv6 address
network.ipv6_secondary_dns Y IPv6 address
network.ipv6_icmp_v6.enable Y(T48G/T46G) 0 or 1
network.internet_port.type Y 0, 1 or 2
network.internet_port.ip Y IPv4 address
network.internet_port.mask Y Subnet Mask
IPv4
network.internet_port.gateway Y IPv4 address
network.primary_dns Y IPv4 address
network.secondary_dns Y IPv4 address

of Configuration Parameters in MAC-Oriented.cfg File
): Only Skype for Business phones in bracket support N(): Skype for Business phones in bracket donot support
: y000000000036.cfg T40P: y000000000054.cfg
Default Value Description Reboot

It configures the sign in address for the User
Credentials (User Sign in) method.
The value format is [email protected].
Blank Example: N
For T40P: It configures the user name for the User
account.sign_in.server_address =
When Y=1, the default Credentials (User Sign in) method.
[email protected]
value is 1; The value format is [email protected] or
When Y=2, the default username@domain, domain.com\username or
value is 1;Blank domain\username. N
For T40P:
When Y=3, the default
When Y=1, the default Example:
value is 1;
value is PCMU; account.sign_in.user_name= [email protected]
When Y=4, the default It onfigures the password for the User Credentials
value is 1;Blank (User Sign in) method. N
value is PCMA;
When
For Y=5, the default
T40P:
value is
When 0; the default
Y=1,
value is G729;
When is
value Y=6,
2; the default
value is
When 0; the default
Y=2, It configures the phones extension for the PIN
value is G722;
When is
value 3;Blank
Y=7, the default
Authentication (Pin Sign in) method.
N
When
T40P:
value
When is 0; the default
Y=3,
value is
When iLBC;
Y=1, the default
When is
value Y=8,
4; the default
When is
value Y=6,
0; the default
value is
When 0; the default
Y=4,
value
When is G726-16;
Y=2, the
When is
value Y=9, the default
1;Blank default It configures the PIN for the PIN Authentication (Pin
When is
value Y=7,
8; the default N
value is
When 0. the default
Y=5, Sign in) method.
value is G726-24;
value is 0;
When is
value Y=8,
18; the default
For Y=6,
When the default It enables or disables the specified codec for
value
When is G726-32;
Y=4, the default
T48G/T46G/T42G/T41P
value is 0; account 1.
When is
value Y=9,
9; the default
:
When Y=7, the default N
value
When is G726-40.
Y=5, the default
When is
value Y=1,
0; the default 0-Disabled
value is
value is 106;
1; the default
When Y=8,
When It configures the codec for account 1.
When
value isY=2,
0; the default 1-Enabled
T48G/T46G/T42G/T41P
value
value is
When is 103;
1; the default
Y=9,
:
When Y=7, the default Example: N
When
value is 0. the default
Y=3, Example:
When is
value Y=1,
104;the default account.1.codec.1.payload_type = PCMU
value is 0; account.1.codec.1.enable = 1
value is
When PCMU;
Y=8, the
When
default means thatthe
It configures thepriority
codec PCMU
of the is enabled
enabled on the
codec for
When is
value Y=2,
102;the default
value is 0;
T48G/T46G/T42G/T41P account 1.
value is
When PCMA; default
Y=9,
When
: Y=5, the
the default N
When is
value Y=3,
105.the default
value is
When 1; the default
Y=1, Example:
value is G723_53;
When is
value Y=6,
2; the default account.1.codec.1.priority = 2
For It configures the rtpmap of the audio codec for
value is
When 1; the default
Y=2,
value is G723_63;
T48G/T46G/T42G/T41P account 1.
When is
value Y=7,
3; the default
:When Y=5, the default
value is 0; the default N
When Y=3,
value is
When G729;
Y=1, the default Example:
When is
value Y=8,
0; the default
When is
value Y=6,
0; the default account.1.codec.1.rtpmap = 0
value is
When 0; the default
Y=4,
value is
When G722;
Y=2, the default It enables or disables the auto answer feature for
When is
value Y=9,
0; the default
When is
value Y=7,
8; the default account 1.
value is
When 0; the
Y=5, 0 default N
value is
When iLBC;
Y=3, the default
When is
value Y=10,
4; the default
When
value Y=8, the default 0-Disabled
value is
When is 4;
0; the default
Y=6,
value is
When G726-16;
Y=4, the default
When is
value Y=11,
1; the default It enables or disables the IP phone to indicate and
When
value Y=9,
is 4; the default 1-Enabled
value is
When 0; the default
Y=7, record missed calls for account 1.
value is
When G726-24;
Y=5, the default
value is 0; 1 If it is set to 1 (Enabled), the IP phone can
N
When
value is 18; the default
Y=10,
When Y=8, the default 0-Disabled
value is
When G726-32;
Y=6, the default automatically answer an incoming call.
value is 0;
When Y=11,
value is 9; the default It enables or disables the IP phone to access voice
When Y=9, the default 1-Enabled
value is
When G726-40;
Y=7, the default Note:
mail boxThe IP phone
without cannotPIN.
entering automatically answer
value is 0; 0 the incoming call during a call even if auto answer N
value is 106; If it is set to 0 (Disabled), the IP phone does not
When Y=10, the default is enabled.
When Y=8, the default 0-Disabled
value is 0; display indicator on the idle screen and log the
value is 103; missed call in the Missed Calls list when missed
When Y=9, the default 1-Enabled
value is 0; calls.
value is 104;
When Y=10, the default If it is set to 1 (Enabled), the IP phone displays a
value is 102; message on the idle screen and logs the missed
When Y=11, the default call in the Missed Calls list when missed calls.
value is 105;
Note: It works only if the value of the parameter
It configures the type of the ICE (Interactive
Connectivity Establishment) feature for the IP
phones.
0-all
1-host
0 N
2-srflx
It configures a ring tone for account 1.
3-udp-turn
Common Example: N
4-tcp-turn
account.1.ringtone.ring_type = Ring3.wav
It means configuring Ring3.wav for account1.
It configures the time zone.
+8 account.1.ringtone.ring_type = Common N
Example:
It means account1 will use the ring tone selected
local_time.time_zone = +8
for the IP phone configured by the parameter
"phone_setting.ring_type".
It configures the time zone name.
For more available time zones, refer to Time Zones
The available time zone names depend on the time
China(Beijing) sheet. N
zone configured by the parameter
local_time.time_zone.
For more information on the available time zone
It configures the IP address or domain name of the
names for each time zone, refer to Time Zones
NTP server 1.
cn.pool.ntp.org sheet. N
Example:
Example:
local_time.ntp_server1 = 192.168.0.5
local_time.time_zone_name
It configures the IP address or = domain
China(Beijing)
name of the
NTP server 2. If the NTP server 1 is not configured
cn.pool.ntp.org Note:
or It works
cannot only if the
be accessed, value
the of thewill
IP phone parameter
request N
local_time.summer_time
the time and date from the is setserver
NTP to 2 (Automatic)
2.
and the parameter local_time.time_zone should
It
beconfigures
configuredthe interval (in seconds) to update
in advance.
Example:
time and date from the NTP server.
1000 local_time.ntp_server2 = 192.168.0.6 N
Example:
local_time.interval = 1000
It configures the Daylight Saving Time (DST)
feature.
2 N
0-Disabled
It configures the DST time type.
1-Enabled
0 0-DST by Date N
2-Automatic
1-DST by Week
It configures the start time of the DST.
1/1/0 Note: It works only if the value of the parameter N
Value formats are:
local_time.summer_time is set to 1 (Enabled).
Month/Day/Hour (for DST by Date)
Month/Week of Month/Day of Week/Hour of Day
It configures the end time of the DST.
(for DST by Week)
12/31/23 Value formats are: N
If local_time.dst_time_type is set to 0 (DST by
Month/Day/Hour (for DST by Date)
Date), use the mapping:
Month/Week of Month/Day of Week/Hour of Day
Month:
It configures1=January, 2=February,,
the offset time (in minutes)12=December
of DST.
(for DST by Week)
Day: 1=the first day in a month,, 31= the last
Blank day in a
Note: It month
works only if the value of the parameter N
If local_time.dst_time_type is set to 0 (DST by
Hour: 0=0am, 1=1am,, 23=11pm
Date), use the mapping:
Month:
It configures1=January,
the time2=February,,
format. is set to 12=December
If local_time.dst_time_type 1 (DST by
Day: 1=the first day in a month,, 31= the last
1 Week), use the mapping: N
day in a12
0-Hour month
Month: 1=January, 2=February,, 12=December
Hour: 0=0am, 1=1am,, 23=11pm
Week of Month: 1=the first week in a month,,
1-Hour
5=the 24 week in a month
last
It configures the date format. is set to 1 (DST by
If local_time.dst_time_type
Day of Week: 1=Monday, 2=Tuesday,,
0 Week),
If use
it is set tothe mapping:
0 (Hour 12), the time will be displayed N
7=Sunday
0-WWW MMM DD
Month:
in 1=January, 2=February,, 12=December
Hour of Day: 0=0am, AM
12-hour format with or PM specified.
1=1am,, 23=11pm
Week of Month: 1=the first week in a month,,
1-DD-MMM-YY
5=the lasttoweek in a month
If
It it is set
enables
Note: or1disables
It works (Hour
only if24),
thethe
the IP time
of will
phone
value be displayed
to update
the time
parameter
Day
in
with of Week:
24-hour
the format
offset 1=Monday,
time(e.g., 2:00
offered 2=Tuesday,,
PM displays as 14:00).
0 local_time.summer_time
2-YYYY-MM-DD isby the
set toDHCP server.
1 (Enabled). N
7=Sunday
Hour of Day: 0=1am, 1=1am,, 23=11pm
0-Disabled
3-DD/MM/YYYY
It enables
Note: or disables
It works only if the
the IP phone
value to obtain
of the time
parameter
1-Enabled
4-MM/DD/YY
and date from manual settings.
0 N
Note: It is only available to offset time from GMT
5-DD MMM (obtain
0-Disabled YYYY time and date from NTP server)
0.
6-WWW DD(obtain
1-Enabled MMM time and date from manual
settings)
Note: WWW represents the abbreviation of the
week, DD represents a two-digit day, MMM
represents the first three letters of the month,
YYYY represents a four-digit year, and YY
It configures the priority for the IP phone to use the
NTP server address offered by the DHCP server.
0 N
0-High (use the NTP server address offered by
DHCP preferentially)
It configures the access URL of the DST file
(AutoDST.xml).
Blank 1-Low (use the NTP server address configured N
manually preferentially)
Example:
auto_dst.url = tftp://192.168.1.100/AutoDST.xml
It configures the IP address mode.
0 Note: It works only if the value of the parameter Y
0-IPv4
"local_time.summer_time" is set to 2 (Automatic).
1-IPv6
It configures the IPv6 prefix.
64 2-IPv4 & IPv6 Y
network.ip_address_mode is set to 1 (IPv6) or 2
(IPv4 & IPv6), and
It configures the Internet (WAN) port type for IPv6.
"network.ipv6_internet_port.type" is set to 1 (Static
0 IP Address). Y
0-DHCP
1-Static IP Address
It configures the IPv6 address.
Blank Note: It works only if the value of the parameter Y
Example:
network.ipv6_internet_port.ip =
(IPv4 & IPv6).
2026:1234:1:1:215:65ff:fe1f:caa
It configures the IPv6 default gateway.
Example:
network.ipv6_internet_port.gateway =
( IPv4 & IPv6), and
3036:1:1:c3c7:c11c:5447:23a6:255
"network.ipv6_internet_port.type"
It configures the primary IPv6 DNSisserver.
set to 1 (Static
IP Address).
Example:
network.ipv6_primary_dns = 3036:1:1:c3c7:
( IPv4 & IPv6), and
c11c:5447:23a6:256
"network.ipv6_internet_port.type"
It configures the secondary IPv6 DNS is set to 1 (Static
server.
IP Address).
Example:
"network.ip_address_mode" is set to 1 (IPv6) or 2
network.ipv6_secondary_dns =
(IPv4 & IPv6). In DHCP environment, you also need
2026:1234:1:1:c3c7:c11c:5447:23a6
toenables
It make sure the value
or disables of IP
the the parameter
phone to obtain IPv6
"network.ipv6_static_dns_enable"
network is set
settings via SLAAC (Stateless to 1 (On).
Address
1 Note: It works only if the value of the parameter Y
Autoconfiguration) method.
0-Disabled
toconfigures
It make surethe
theInternet
value of(WAN)
the parameter
port type for IPv4.
"network.ipv6_static_dns_enable" is set to 1 (On).
0 1-Enabled Y
0-DHCP
Note: SLAAC is enabled on T42G/T41P IP phones
1-PPPoE (not applicable to T42G/T41P/T40P IP
byconfigures
It default. You
theare notaddress.
IPv4 allowed to configure this
phones)
parameter for those IP phones.
Blank Example: Y
2-Static IP Address
network.internet_port.ip = 192.168.1.20
Note:
It It works
configures only
the if subnet
IPv4 the value of the parameter
mask.
Blank network.ip_address_mode is set to 0 (IPv4) or 2 Y
( IPv4 & IPv6).
Example:
( IPv4 & IPv6), and "network.internet_port.type" is
network.internet_port.mask = 255.255.255.0
set to 2 (Static IP Address).
It configures the IPv4 default gateway.
Example:
network.internet_port.gateway = 192.168.1.254
It configures the primary IPv4 DNS server.
Example:
network.primary_dns = 202.101.103.55
It configures the secondary IPv4 DNS server.
Blank "network.ip_address_mode" is set to 0 (IPv4) or 2 Y
Example:
network.secondary_dns = 202.101.103.54
to make sure the value of the parameter
"network.static_dns_enable" is set to 1 (On).
to make sure the value of the parameter
"network.static_dns_enable" is set to 1 (On).
File
et donot support
Phone User Interface

Web User Interface Further Reference
T42G/T41P/T40P T48G/T46G
Account->Register- Sign in->User Sign in- User Sign in->Sign-in

Yealink IP Phones Administrator Guide
>Login address >Sign in address Address
Account->Register- Sign in->User Sign in- User Sign in->User

>Register Name >user Name
Account->Register- Sign in->User Sign in- User Sign in-

>Password >Password >Password
Sign in->PIN
Account->Register-
Authentication- PIN Sign in->Extension Yealink IP Phones Administrator Guide
>Extension
>Extension
Sign in->PIN
Account->Register-
Authentication- PIN Sign in->PIN Yealink IP Phones Administrator Guide
>Password
>Extension PIN
Account->Codec / / Yealink IP phones Administrator Guide
/ / / Yealink IP phones Administrator Guide
Account->Basic->Auto Menu->Features->Auto Menu->Features-

Yealink IP phones Administrator Guide
Answer Answer->System Status >Auto Answer->Line 1
Account->Basic-
/ / Yealink IP phones Administrator Guide
>Missed Call Log
/ / / Yealink IP phones Administrator Guide

/ / / /
Menu->Settings->Basic
Account->Basic->Ring Menu->Basic->Sound-
Settings->Ring Tones- Yealink IP Phones Administrator Guide
Type >Ring Tones
>"user name"
Menu->Settings->Basic Menu->Basic->Date &

Settings->Time & Date- Settings->Time & Date- Time ->General-
>Time Zone >SNTP Settings->Time >SNTP Settings->Time
Zone Zone
Menu->Basic->Date &
Settings->Time & Date- Settings->Time & Date-
Time->General->SNTP Yealink IP Phones Administrator Guide
>Location >SNTP Settings-
Settings->Location
>Location
Menu->Basic->Date &
>Primary Server >SNTP Settings->NTP
Settings->NTP Server1
Server1
Menu->Basic->Date &
>Secondary Server >SNTP Settings->NTP
Settings->NTP Server2
Server2
Settings->Time & Date-

>Synchronism / / Yealink IP Phones Administrator Guide
(15~86400s)
Menu->Settings->Basic Menu->Basic->Date &

Settings->Time & Date- Settings->Time & Date- Time->General->SNTP
>Daylight Saving Time >SNTP Settings- Settings->Daylight
>Daylight Saving Saving

/ / Yealink IP Phones Administrator Guide
>Fixed Type

>Start Date

>End Date

>Offset(minutes)
Menu->Basic->Date &
Time->Time & Date Yealink IP Phones Administrator Guide
>Time Format >Time & Date Format-
Format->Time Format
>Time Format
Menu->Basic->Date &
Time->Time & Date Yealink IP Phones Administrator Guide
>Date Format >Time & Date Format-
Format->Date Format
>Date Format
Settings->Time & Date- Menu->Basic->Date &
Settings->Time & Date- Yealink IP Phones Administrator Guide
>DHCP Time Time->DHCP Time
>DHCP Time

>Manual Time
>NTP by DHCP Priority
/ / / Yealink IP Phones Administrator Guide
Menu->Settings-
Network->Basic- Menu->Advanced-
>Advanced Settings-
>Internet Port- >Network->WAN Port- Yealink IP phones Administrator Guide
>Network->WAN Port-
>Mode(IPv4/IPv6) >IP Mode
>IP Mode
Menu->Settings-
Network->Basic->IPv6 Menu->Advanced-
>Advanced Settings-
Config->Static IP >Network->WAN Port-
>Network->WAN Port- Yealink IP phones Administrator Guide
Address->IPv6 >IPv6->Static IP->IPv6
>IPv6->Static IPv6
Prefix(0~128) IP Prefix
Client->IPv6 IP Prefix
Menu->Settings-
Menu->Advanced-
Network->Basic->IPv6 >Advanced Settings-
Config >Network->WAN Port-
>IPv6
>IPv6
Menu->Settings-
Menu->Advanced-
Network->Basic->IPv6 >Advanced Settings- For T48G:
>Network->WAN Port-
Config->Static IP >Network->WAN Port- Menu->Advanced- Yealink IP phones Administrator Guide
>IPv6->Static IP->IP
Address->IP Address >IPv6->Static IPv6 >Network->WAN Port-
Address
Client->IPv6 IP
Menu->Settings- >IPv6->Static IP-
>Advanced Settings- Menu->Advanced-
>Pri.DNS
Network->Basic->IPv6 Menu->Settings-
>Network->WAN Port- >Network->WAN
Or
ForMenu->Advanced-
T48G: Port-
Config->Static IP >Advanced Settings- Yealink IP phones Administrator Guide
>IPv6->Static IPv6 >IPv6->Static IP- Port-
>Network->WAN
Menu->Advanced-
Address->Gateway >Network->WAN Port-
Client->IPv6 Default >Gateway
>IPv6->DHCP->Staic
>Network->WAN Port-
>IPv6->Static IPv6
Gateway DNS(Enabled) IP-
>IPv6->Static
Client->IPv6 Pri.DNS
Menu->Settings-
Network->Basic->IPv6 ->Pri.DNS
>Sec.DNS
Or Menu->Settings-
>Advanced Settings-
Config->Static IP Or Menu->Advanced- Yealink IP phones Administrator Guide
>Advanced Settings-
>Network->WAN Port-
Address->Primary DNS For T46G:
>Network->WAN Port-
>Network->WAN
>IPv6->Static Port-
IPv6
Menu->Advanced-
>IPv6->DHCP->Staic
>IPv6->DHCPSec.DNS
Client->IPv6 IPv6
Network->Basic->IPv6 >Network->WAN Port-
DNS(Enabled)
Client->Staic
Or Menu->Settings-
Config->Static IP >IPv6->Static IP-
->Sec.DNS
DNS(Enabled)
>Advanced ->IPv6
Settings- Yealink IP phones Administrator Guide
Address->Secondary >Primary DNS
Pri.DNS
>Network->WAN Port-
DNS Or Menu->Advanced-
For T46G:
>IPv6->DHCP IPv6
>Network->WAN
Menu->Advanced-Port-
Client->Staic
Network->Advanced- >IPv6->DHCP->Staic
>Network->WAN Port-
DNS(Enabled) ->IPv6
>ICMPv6 Status- / DNS(Enabled)-
>IPv6->Static
/ IP- Yealink IP phones Administrator Guide
Sec.DNS
>Active >Primary DNS
>Secondary DNS
Or Menu->Advanced-
Menu->Settings- >Network->WAN Port-
Menu->Advanced-
Network->Basic->IPv4 >Advanced Settings- >IPv6->DHCP->Staic
Config >Network->WAN Port- DNS(Enabled)
>IPv4
>IPv4 ->Secondary DNS
Menu->Settings-
Menu->Advanced-
Network->Basic->IPv4 >Advanced Settings-
>Network->WAN Port-
Config->Static IP >Network->WAN Port- Yealink IP phones Administrator Guide
>IPv4->Static IP->IP
Address->IP Address >IPv4->Static IPv4
Address
Client->IPv4
Menu->Settings- For T48G:
Menu->Advanced-
Network->Basic->IPv4 >Advanced Settings- Menu->Advanced-
>Network->WAN Port-
Config->Static IP >Network->WAN Port- >Network->WAN Yealink IP phones Administrator Guide
>IPv4->Static IP- Port-
Address->Subnet Mask >IPv4->Static IPv4 >IPv4->Static
>Subnet
For T48G:Mask IP-
Client->Subnet Mask
Menu->Settings- >Pri.DNS
Menu->Advanced-
>Advanced Settings- Menu->Advanced-
Or Menu->Settings-
Network->Basic->IPv4 Menu->Settings- >Network->WAN Port-
>Network->WAN Port- >Network->WAN Port-
>Advanced->Network-
Config->Static IP >Advanced Settings- >IPv4->Static IP- Yealink IP phones Administrator Guide
>IPv4->Static IPv4 >IPv4->Static
>WAN IP-
Port->IPv4-
Address->Gateway >Network->WAN Port- >Sec.DNS(Secondary
Client->Default >Gateway
>DHCP->Staic
>IPv4->Static IPv4 DNS)
Gateway DNS(Enabled)-
Client->IPv4 Pri.DNS Or Menu->Advanced-
Network->Basic->IPv4 Menu->Settings- >Pri.DNS
Or Menu->Settings- >Network->WAN Port-
Config->Static IP >Advanced Settings- Yealink IP phones Administrator Guide
>Advanced Settings- >IPv4->DHCP->Staic
Address->Primary DNS >Network->WAN Port- For T46G:
>Network->WAN Port- DNS(Enabled)
>IPv4->Static IPv4 Menu->Advanced-
>IPv4->DHCP IPv4 ->Sec.DNS(Secondary
Network->Basic->IPv4 Client->IPv4 Sec.DNS >Network->WAN Port-
Client->Static DNS DNS)
Config->Static IP Or Menu->Settings- >IPv4->Static IP-
(Enabled) ->IPv4 Yealink IP phones Administrator Guide
Address->Secondary >Advanced Settings- >Primary DNS
Pri.DNS For T46G:
DNS >Network->WAN Port- Or Menu->Settings-
Menu->Advanced-
>IPv4->DHCP IPv4 >Advanced->Network-
>Network->WAN Port-
Client->Static DNS >WAN Port->IPv4-
>IPv4->Static IP-
(Enabled) ->IPv4 >DHCP->Staic
>Sec.DNS(Secondary
Sec.DNS DNS(Enabled)
DNS)
->Primary DNS
Or Menu->Advanced-
>Network->WAN Port-
Description of Configuratio
Y: All Skype for Business phones support N: All Skype for Business phones not support Y(): Only Skype for Business phon
The name of the Common CFG file for each model is shown below:
T48G: y000000000035.cfg T46G: y000000000028.cfg T42G: y000000000029.cfg T41P: y000000000036.cfg
T48G/T46G/T4 Permitted
Function Parameter
2G/T41P/T40P Value
String within
License lync_license_dat.url Y
99 characters
String within
Hostname network.dhcp_host_name Y
99 characters
N(T42G/T41P/T40 String within

network.pppoe.user
P) 32 characters
PPPoE
N(T42G/T41P/T40 String within

network.pppoe.password
P) 99 characters
network.pc_port.enable Y 0 or 1
0, 1, 2, 3, 4 or
network.internet_port.speed_duplex Y
5
0, 1, 2, 3, 4 or
network.pc_port.speed_duplex Y
5
Network_Advanced
network.static_dns_enable Y 0 or 1
network.ipv6_static_dns_enable Y 0 or 1
network.vlan.pc_port_mode N(T40P) 0 or 1
network.vlan.internet_port_enable Y 0 or 1
Integer from 1
network.vlan.internet_port_vid Y
to 4094
Integer from 0
network.vlan.internet_port_priority Y
to 7
VLAN
network.vlan.pc_port_enable Y 0 or 1
VLAN
Integer from 1
network.vlan.pc_port_vid Y
to 4094
Integer from 0
network.vlan.pc_port_priority Y
to 7
network.vlan.dhcp_enable Y 0 or 1
Integer from 1
network.vlan.dhcp_option Y
to 255
Integer from 1
network.port.http Y
to 65535
Integer from 1
network.port.https Y
to 65535
WEB HTTP(S)
wui.https_enable Y 0 or 1
wui.http_enable Y 0 or 1
Integer from 0
network.qos.rtptos Y
to 63
QoS
Integer from 0
network.qos.signaltos Y
to 63
0, 1, 2, 3, 4, 5,
network.802_1x.mode Y
6 or 7
String within
network.802_1x.identity Y
32 characters
String within
802.1X network.802_1x.md5_password Y
32 characters
URL within 511

network.802_1x.root_cert_url Y
characters
URL within 511

network.802_1x.client_cert_url Y
characters
network.lldp.enable Y 0 or 1
LLDP
Integer from 1
network.lldp.packet_interval Y
to 3600
network.cdp.enable Y 0 or 1
CDP
Integer from 1
network.cdp.packet_interval Y
to 3600
Span to PC network.span_to_pc_port Y 0 or 1
syslog.mode Y 0 or 1
IP address or
Syslog syslog.server Y
domain name
Integer from 0
syslog.log_level Y
to 6
Autop_Mode auto_provision.power_on Y 0 or 1
auto_provision.pnp_enable Y 0 or 1
IP address or
AutoP_PNP auto_provision.pnp_domain_name Y
domain name
String within
auto_provision.pnp_event_vendor Y
128 characters
auto_provision.dhcp_option.enable Y 0 or 1
Integer from
AutoP_DHCP auto_provision.dhcp_option.list_user_options Y
128 to 254
String within
auto_provision.dhcp_option.option60_value Y
99 characters
auto_provision.repeat.enable Y 0 or 1
AutoP_Repeat
AutoP_Repeat
Integer from 1
auto_provision.repeat.minutes Y
to 43200
auto_provision.weekly.enable Y 0 or 1
0,1,2,3,4,5,6
or a
auto_provision.weekly.dayofweek Y combination of
these
AutoP_Weekly digits
Time from
auto_provision.weekly.begin_time Y
00:00 to 23:59
Time from
auto_provision.weekly.end_time Y
00:00 to 23:59
URL within 511

auto_provision.server.url Y
characters
String within
AutoP_URL auto_provision.server.username Y
32 characters
String within
auto_provision.server.password Y
32 characters
auto_provision.aes_key_in_file Y 0 or 1
Autop_Aes Key auto_provision.aes_key_16.com Y 16 characters
auto_provision.aes_key_16.mac Y 16 characters
Watch_dog watch_dog.enable Y 0 or 1
voice.vad Y 0 or 1
Echo Cancellation voice.cng Y 0 or 1
voice.echo_cancellation Y 0 or 1
voice.jib.adaptive Y 0 or 1
Jitter Buffer
Integer from 0
voice.jib.min Y
to 400
Custom,
Jitter Buffer Australia,
Austria, Brazil,
Integer from
Belgium, 0
Chile,
voice.jib.max Y
to 400
China,
Czech,Czech
ETSI,
Denmark,
Integer from 0
voice.jib.normal Y Finland,
to 400
France,
Germany,
Great Britain,
Greece,
voice.tone.country Y
Hungary,
Lithuania,
India, Italy,
Japan, Mexico,
voice.tone.dial Y NewString
Zealand,
Netherlands,
Norway,
Portugal,
Spain,
voice.tone.ring Y String
Switzerland,
Sweden,
Russia, United
States
voice.tone.busy Y String
voice.tone.congestion Y String
Tones
voice.tone.callwaiting Y String
voice.tone.dialrecall Y String
voice.tone.info Y String
voice.tone.stutter Y String
English,
Chinese
Simplified,
voice.tone.autoanswer Y String
Chinese
Traditional,
French,
English,
German,
Chinese
Italian, Polish,
lang.wui Y Simplified,
Portuguese,
Chinese
Spanish,
Traditional,
Turkish,
French,
Korean,
German,
Russian or the
Italian, Polish,
lang.gui Y custom
Portuguese,
language
Spanish,
name.
Turkish,
Korean,
Russian or the
custom
Language language
name.
URL within 511
gui_lang.url Y
characters
Language
http://localhost
/all or
gui_lang.delete Y http://localhost
/Y.GUI.name.la
ng
URL within 511

wui_lang.url Y
characters
/all or
wui_lang.delete Y
/Y.name.js
call_waiting.enable Y 0 or 1
Call Waiting
call_waiting.tone Y 0 or 1
Phone Lock sfb.phone_lock.enable Y 0 or 1
sip.btoe.enable Y 0 or 1
BToE sip.btoe.secure_pin Y String
sip.btoe.as_audio_dev.enable Y 0 or 1
IP address or
Features_Action features.action_uri_limit_ip Y
any
Update Checking Integer from 1

sfb.update_time Y
Time to 48
E911 sfb.E911_location_tip Y 0 or 1
features.dtmf.hide Y 0 or 1
features.dtmf.hide_delay Y 0 or 1
Features_DTMF features.dtmf.repetition Y 1, 2 or 3
Features_DTMF
features.dtmf.replace_tran Y 0 or 1
String within
features.dtmf.transfer Y
32 characters
option120 sip.option120_get_lync_server.enable Y 0 or 1
ldap_downloadca sip.ldap_download_rootca.enable Y 0 or 1
features.headset_prior Y 0 or 1
features.headset_training Y 0 or 1
features.busy_tone_delay Y 0, 3 or 5
features.send_key_tone Y 0 or 1
features.key_tone Y 0 or 1
features.ringer_device.is_use_headset Y 0, 1 or 2
Features_ Audio Settings
features.play_hold_tone.enable Y 0 or 1
Integer from 3
features.play_hold_tone.delay Y
to 3600
Integer within
features.redial_tone Y
6 digits
features.allow_mute Y 0 or 1
features.partition_tone Y 0 or 1
features.play_local_dtmf_tone_enable Y 0 or 1
Features_History features.save_call_history Y 0 or 1
Integer from 1
sfb.search_delay_time Y
to 10
Ring1.wav,
Ring2.wav,
Ring3.wav,
Integer from 1
phone_setting.inter_digit_time Y Ring4.wav,
to 14
Ring5.wav
Ring6.wav,
Ring7.wav,
Ring8.wav,
phone_setting.ring_type Y
Silent.wav,
Splash.wav,
or custom ring
tone name
URL within 511
ringtone.url Y (e.g.,
characters
Customring.wa
v)
Phone Settings ringtone.delete Y
/all
phone_setting.predial_autodial Y 0 or 1
phone_setting.is_deal180 Y 0 or 1
features.reset_by_long_press_enable Y 0 or 1
String within
phone_setting.product_name Y
99 characters
dialplan.dialnow.rule.X
String within
(X ranges from 1 to 100) Y
511 characters
URL within 511

Dialnow dialplan_dialnow.url Y
characters
Integer from 0
phone_setting.dialnow_delay Y
to 14
phone_setting.common_power_led_enable Y 0 or 1
phone_setting.mail_power_led_flash_enable Y 0 or 1
phone_setting.ring_power_led_flash_enable Y 0 or 1
LED
LED
phone_setting.talk_and_dial_power_led_enable Y 0 or 1
phone_setting.mute_power_led_flash_enable Y 0 or 1
phone_setting.hold_and_held_power_led_flash_ena
ble Y 0 or 1
Integer from 1
phone_setting.active_backlight_level Y(T48G/T46G)
to 10
phone_setting.inactive_backlight_level Y(T48G/T46G) 0 or 1
Phone
Setting_Display
0, 1, 15, 30,
phone_setting.backlight_time Y 60, 120, 300,
600 or 1800
Integer from 1
phone_setting.contrast N(T42G/T41P)
to 10
Phone Full Display phone_setting.name_full_display.enable Y(T48G) 0 or 1
String within
security.user_name.user Y
32 characters
String within
security.user_name.admin Y
32 characters
String within
security.user_password Y
32 characters
Security security.trust_certificates Y 0 or 1
security.ca_cert Y 0, 1 or 2
security.dev_cert Y 0 or 1
security.cn_validation Y 0 or 1
URL within 511

trusted_certificates.url Y
characters
Trusted Certificates
Trusted Certificates
trusted_certificates.delete Y
/all
URL within 511

server_certificates.url Y
characters
Server Certificates
server_certificates.delete Y http://localhost/all
Custom URL within 511

configuration.url Y
Configuration characters
Features_Transfer transfer.multi_call_trans_enable N(T48G/T46G) 0 or 1
404, 480, 486

features.normal_refuse_code Y
or 603
String within
features.call_num_filter Y
99 characters
Integer from 1
features.relog_offtime Y
to 1000
features.key_as_send Y 0, 1 or 2
Features_Others features.send_pound_key Y 0 or 1
features.voice_mail_tone_enable Y 0 or 1
Integer from 1
features.auto_answer_delay Y
to 4
sfb.account_lock.enable Y 0 or 1
sfb.always_online.enable Y 0 or 1
Online features.device_pairing_for_online.enable Y 0 or 1
URL within 511

firmware.url Y
characters
Upgrade Firmware
Upgrade Firmware
auto_provision.reset_factory.enable Y 0 or 1
URL within 511

local_contact.data.url Y
characters
Contact sfb.local_favorite.enable N(T40) 0 or 1
sfb.local_favorite.sort N(T40) 1 or 2
String length
CAP account.1.phone_lock.pin Y
from 6 to 15
Calendar sfb.calendar.enable Y 0 or 1
Integer from 5
sfb.presence.inactive_time Y
to 360
Presence
Integer from 5
sfb.presence.away_time Y
to 360
pre_dial tone sfb.pre_dial_tone.enable Y 0 or 1
zero_touch.enable Y 0 or 1
Zero Touch
zero_touch.wait_time Integer from 1

Y
to 100
features.factory_pwd_enable Y 0 or 1
Custom Factory
features.custom_factory_config.enable Y 0 or 1
Configuration
URL within 511

custom_factory_configuration.url Y
characters
PCMU,
PCMA,
multicast.codec Y
G729,
G722
multicast.receive_priority.enable Y 0 or 1
Multicast
Integer from 0
multicast.receive_priority.priority Y
to 10
Multicast
String within
(X ranges from 1 to multicast.listen_address.X.label Y
99 characters
10.)
IP address:
multicast.listen_address.X.ip_address Y
port
multicast.paging_address.X.ip_address Y String
multicast.paging_address.X.label Y String
Ringback features.local_ringback_tone_time Y 0-180000ms
ICE sip.ice_syslog.enable Y 0 or 1
Security sip.lync_check_sn.enable Y 0 or 1
sip.auto_discover_get_lync_server.enable Y 0 or 1
Automation
sip.lync_automation.enable Y 0 or 1
n of Configuration Parameters in Common.cfg File
(): Only Skype for Business phones in bracket support N(): Skype for Business phones in bracket not support
41P: y000000000036.cfg T40P: y000000000054.cfg
For T48G IP phones:

Default
The default Value
value is SIP- Description Reboot
T48G.
For T46G IP phones:
The default value is SIP- It configures the access URL of the Skype for
T46G. Blank Business feature license. Y
For T42G IP phones:
The default value is SIP- It configures the DHCP option 12 hostname on
Example:
T42G. the IP phone.
lync_license_dat.url = Y
For T41P IP phones: http://192.168.1.20/License_$MAC.dat
The default value is SIP-
T41P. The
It IP phonethe
configures willuser
replace
namethefor
characters $MAC
PPPoE connection.
For T40P IP phones: with its MAC address during auto provisioning. For
The defaultBlank
value is SIP- example, the MAC address of one T46G IP phone
Example: Y
T40P. is 00156543EC97. When
network.pppoe.user performing auto
= Xmyl0592123
provisioning, the IP phone will request to
It configures
download thethe password for PPPoE connection.
License_00156543ec97.dat file
Blank from the provisioning server is
network.ip_address_mode address
set to 0 (IPv4) or 2 Y
Example:
http://192.168.1.20.
network.pppoe.password = yealink123
set to 1 (PPPoE).
It enables or disables the PC (LAN) port.
1 network.ip_address_mode is set to 0 (IPv4) or 2 Y
0-Disabled
set to 1 (PPPoE).
1-Auto Negotiate
It configures the transmission method of the
Internet (WAN) port.
0 Y
0-Auto Negotiate
It configures the transmission method of the PC
1-Full Duplex 10Mbps
(LAN) port.
0 Y
0-Auto Negotiate
3-Half
It Duplex
triggers 10Mbps
the static DNS feature to on or off.
0 4-Half Duplex 100Mbps
0-Off Y
5-Full Duplex 1000Mbps (only applicable to
1-On
3-Half
It Duplex
triggers 10Mbps
the static IPv6 DNS feature to on or off.
T48G/T46G/T42G IP phones)
0 If it is set to 0 (Off), the IP phone will use the IPv4 Y
4-Half
0-Off Duplex 100Mbps
DNS obtained from DHCP.
5-Full
1-On Duplex 1000Mbps (only applicable to
If it
It is set to 1the
configures (On),
waythetheIPIP
phone
phone will use
processes
T48G/T46G/T42G IP phones)
manuallyfor
packets configured
the PC (LAN)static IPv4
port DNS.
when VLAN is
0 If it is set to 0 (Off), the IP phone will use the IPv6 Y
enabled
Note: It on the only
works PC (LAN)
if theport.
value of the parameter
DNS obtained from DHCP.
network.pc_port.enable is set to 1 (Auto
network.internet_port.type
0-when packets are sent from is setPC
the toport
0 (DHCP).
to the
Negotiate).
If
It it is set to
enables or1disables
(On), the IP VLAN
the phoneforwill use
the Internet
Internet port, the IP phone will forward the
manually
(WAN) port. configured static IPv6 DNS.
0 packets directly. Y
0-Disabled
1-when packets are sent from the PC port to the
network.ipv6_internet_port.type is set to 0
Internet
It port,the
configures andVLAN
thereIDisfor
no the
VLAN tag in (WAN)
Internet the
(DHCP).
1-Enabled
packet, the IP phone will tag the packet with the
port.
1 configured tag for the PC port and then forward it. Y
Note: When packets are sent from the Internet

It configures
port to the PCthe VLAN
port, priority
remove thefor the Internet
packets tag if it is
(WAN)
the sameport.
as the configured tag for the PC port,
0 Y
else forward the packets directly.
7 is the highest priority, 0 is the lowest priority.
It enables or disables the VLAN for the PC (LAN)
port.
0 Y
0-Disabled
It configures the VLAN ID for the PC (LAN) port.
1-Enabled
1 Y
It configures the VLAN priority for the PC (LAN)

port.
0 Y
It enables or disables the DHCP VLAN discovery
feature on the IP phone.
1 Y
0-Disabled
It configures the DHCP option from which the IP
1-Enabled
phone will obtain the VLAN settings.
132 You can configure at most five DHCP options and Y
separate them by commas.
It configures the HTTP port for the user to access
the web user interface of the IP phone using the
80 HTTP protocol. Y
It configures the HTTPS port for the user to

access the web user interface of the IP phone
443 using the HTTPS protocol. Y
It enables or disables the user to access the web

user interface of the IP phone using the HTTPS
1 protocol. Y
0-Disabled
It enables or disables the user to access the web
user interface of the IP phone using the HTTP
1 1-Enabled Y
protocol.
0-Disabled
It configures the DSCP (Differentiated Services
Code Point) for voice packets.
46 1-Enabled Y
The default DSCP value for RTP packets is 46
(Expedited Forwarding).
It configures the DSCP (Differentiated Services
Code Point) for SIP packets.
26 Y
The default DSCP value for SIP packets is 26
(Assured Forwarding).
It configures the 802.1x authentication method.
0 0-Disabled Y
1-EAP-MD5
It configures the user name for 802.1x
authentication.
Blank 2-EAP-TLS Y
Example:
3-EAP-PEAP/MSCHAPv2
network.802_1x.identity = admin
It configures the password for 802.1x
4-EAP-TTLS/EAP-MSCHAPv2
authentication.
network.802_1x.mode is set to 1, 2, 3, 4, 5, 6 or
5-EAP-PEAP/GTC
Example:
7.
network.802_1x.md5_password = admin123
It configures the access URL of the CA certificate.
6-EAP-TTLS/EAP-GTC
Blank Note: It works only if the value of the parameter N
Example:
7-EAP-FAST
network.802_1x.mode is set to 1, 3, 4, 5, 6 or 7.
network.802_1x.root_cert_url =
http://192.168.1.10/ca.pem
It configures the access URL of the device
certificate.
network.802_1x.mode is set to 2, 3, 4, 5, 6 or 7.
Example:
The format of the certificate must be *.pem, *.crt,
network.802_1x.client_cert_url =
*.cer or *.der.
http://192.168.1.10/client.pem

network.802_1x.mode is set to 2 (EAP-TLS). The
format of the certificate must be *.pem.
It enables or disables the LLDP (Linker Layer
Discovery Protocol) feature on the IP phone.
1 Y
0-Disabled
It configures the interval (in seconds) for the IP
1-Enabled
phone to send the LLDP (Linker Layer Discovery
60 Protocol) request. Y

It enables or disables the CDP (Cisco Discovery
network.lldp.enable is set to 1 (Enabled).
Protocol) feature on the IP phone.
0 Y
0-Disabled
It configures the interval (in seconds) for the IP
1-Enabled
phone to send the CDP (Cisco Discovery Protocol)
60 request. Y
Note: If it is set to 1 (Enabled), the IP phone will
attempt to determine its VLAN ID through CDP.
It enables or disables the IP phone to span data
network.cdp.enable is set to 1 (Enabled).
packets received from the WAN (Internet) port to
0 the PC (LAN) port. Y
0-Disabled
Configures the IP phone to export log files to the
local system or a syslog server.
0 1-Enabled Y
0-Local
If it is set to 1 (Enabled), all data packets from
Internet
It port the
configures can IP
beaddress
received
orby PC (LAN)
domain nameport.
of
1-Server
the syslog server when exporting log to the
Blank Note: It
syslog works only if the value of the parameter
server. Y
network.pc_port.enable is set to 1 (Auto
Negotiate).
Example:
It configures the detail level of syslog information
syslog.server = 192.168.1.100
to be exported.
3 Y
0-system is unusable
syslog.mode is set to 1 (Server).
It triggers the power on feature to on or off.
1-action must be taken immediately
1 0-Off N
2-critical condition
1-On
3-error
It conditions
triggers the Plug and Play (PnP) feature to on or
off.
1 If it is set to 1(On), the IP phone will perform an N
4-warning conditions
auto provisioning process when powered on.
0-Off
5-normal but significant condition
It configures the IP address or domain name of
1-On
the SIP URI included in the PnP SUBSCRIBE
6-informational
224.0.1.75 messages. N
If it is set to 1(On), the IP phone will broadcast
PnP SUBSCRIBE messages to obtain a
provisioning
It configures server address
the vendor during
name startup.
included in the PnP
SUBSCRIBE messages.
Yealink N
It triggers the DHCP Option feature to on or off.

1 0-Off N
1-On
It configures the custom DHCP option for
requesting provisioning server address.
Blank If it is set to 1(On), the IP phone will obtain the N
provisioning server address by detecting DHCP
options.
auto_provision.dhcp_option.enable is set to 1
It configures the value (vendor name of the
(On).
device) of DHCP option 60.
yealink N
It triggers the repeatedly feature to on or off.

0 0-Off N
1-On
If it is set to 1 (On), the IP phone will perform an

auto provisioning process repeatedly.
It configures the interval (in minutes) for the IP
phone to perform an auto provisioning process
1440 repeatedly. N

It triggers the weekly feature to on or off.
auto_provision.repeat.enable is set to 1 (On).
0 0-Off N
1-On
It configures the days of the week for the IP
0123456 If it is set to 1 (On), the IP phone will perform an N
weekly.
auto provisioning process weekly.
0-Sunday
It configures the begin time of the day for the IP
00:00 1-Monday N
weekly.
2-Tuesday
It configures the end time of the day for the IP
auto_provision.weekly.enable is set to 1 (On).
3-Wednesday
00:00 weekly. N
4-Thursday
It configures the access URL of the provisioning
5-Friday
server.
Blank N
6-Saturday
Example:
It configures the user name for provisioning
auto_provision.weekly.dayofweek
server access. = 01
Blank It means the IP phone will perform an auto N
provisioning process every Sunday and Monday.
It configures
Note: the
It works password
only for provisioning
if the value server
of the parameter
access.
Blank N
It enables or disables the IP phone to decrypt

configuration files using the encrypted AES keys.
0 N
0-Disabled
It configures the plaintext AES key for decrypting
1-Enabled
the Common CFG file.
Blank The valid characters contain: 0 ~ 9, A ~ Z, a ~ z N
If it is set to 1 (Enabled), the IP phone will
and the following special characters are also
download <y0000000000xx_Security>.enc and
supported: # $ % * + , - . : = ? @ [ ] ^ _ { } ~.
<MAC_Security>.enc
It configures the plaintextfiles AES
during
keyauto
for decrypting
provisioning,
the and then
MAC-Oriented CFG decrypts
file. these files into
Blank Example: N
the
The plaintext keys (e.g.,
valid characters key2, 0key3)
contain: ~ 9, respectively
A ~ Z, a ~ z
auto_provision.aes_key_16.com =
using
and the
the phone built-in
following specialkey (e.g., key1).
characters The IP
are also
0123456789abcdef
phone
supported:then# decrypts
$ % * +the, - .encrypted
: = ? @ [ ]configuration
^ _ { } ~.
It enables
files using or disables the key
corresponding Watch Dog
(e.g., feature.
key2, key3).
1 Example: N
auto_provision.aes_key_in_file is set to 0
0-Disabled
If it is set to 0 (Disabled), the IP phone
auto_provision.aes_key_16.mac = will
(Disabled).
decrypt the encrypted configuration files using
0123456789abmins
1-Enabled
plaintext
It enablesAES keys configured
or disables the VAD on the Activity
(Voice IP phone.
Note: It works
Detection) onlyon
feature if the IP value of the parameter
phone.
0 If it is set to 1 (Enabled), the IP phone will reboot N
auto_provision.aes_key_in_file is set to 0
automatically when the system is broken down.
(Disabled).
0-Disabled
It enables or disables the CNG (Comfortable Noise
1-Enabled
Generation) feature on the IP phone.
1 N
0-Disabled
It enables or disables the AEC (Acoustic Echo
1-Enabled
Canceller) feature on the IP phone.
1 N
0-Disabled
It configures the type of jitter buffer.
1-Enabled
1 0-Fixed N
1-Adaptive
It configures the minimum delay time (in
milliseconds) of jitter buffer.
60 N
voice.jib.adaptive is set to 1 (Adaptive).
It configures the maximum delay time (in
240 N
voice.jib.adaptive is set to 1 (Adaptive).
It configures the normal delay time (in
120 N
voice.jib.adaptive is set to 0 (Fixed).
It configures the country tone for the IP phone.
Custom Example: N
voice.tone.country = Custom
It customizes the dial tone.
Blank tone list = element[,element] [,element] N
Where
element = [!]Freq1[+Freq2][+Freq3][+Freq4]
It customizes the ringback tone.
/Duration
The value format is Freq/Duration. For more
Blank Freq: the frequency of the tone (ranges from 200 N
information on the value format, refer to the
to 4000 Hz). If it is set to 0 Hz, it means the tone
parameter voice.tone.dial.
is not played.
It customizes the tone when the callee is busy.
For T40P:
Blank voice.tone.country is set to Custom. N
A tone is comprised
information of at format,
on the value most two different
refer to the
frequencies.
It
Forcustomizes the tone when the network is
T48G/T46G/T42G/T41P:
congested.
A
Blank voice.tone.countryof
tone is comprised is at
setmost four different
to Custom. N
frequencies.
information
Duration: the on duration
the value(in format, refer to the
milliseconds) of the
parameter
dial voice.tone.dial.
tone, ranges
It customizes the from 0 to 30000ms.
call waiting tone.
Blank Note:
You canIt configure
works only ifmost
the value
eight of the parameter N
information on theatvalue format, different tones
refer to the
voice.tone.country
for one condition, and isseparate
set to Custom.
them by commas.
(e.g.,
It customizes the call back tone.
250/200,0/1000,200+300/500,200+500+800+15
00/1000).
Blank voice.tone.country is set to Custom. N
parameter
If you wantvoice.tone.dial.
the IP phone to play tones once, add
an exclamation
It customizes themark
info ! before
tone. tones (e.g.,
The phone !
will play
250/200,0/1000,
the info tone with the special information, for
Blank voice.tone.country is set to Custom.
200+300/500,200+500+800+1500/1000). N
example, the number you are calling is not in
service.
Note: It works
The value only
format if the value of the
is Freq/Duration. parameter
For more
It customizes the toneiswhen
voice.tone.country set tothe IP phone
Custom.
receives a voice mail.
Blank parameter voice.tone.dial. N
voice.tone.country
It is settone
customizes the warning to Custom.
for auto answer.
voice.tone.country is set to Custom.
It configures the language used on the web user
interface.
English voice.tone.country is set to Custom. N
Example:
lang.wui = English
It configures the language used on the IP phone
If you want to use the custom language (e.g.,
user interface.
Wuilan) for the IP phone, configure the parameter
English lang.wui = Wuilan. N
Example:
lang.gui = English
Note: If the language of your browser is not
supported by the IP phone, the web user interface
Note:
will use English by default.
Korean is not applicable to T40P IP phones.
If you want to use the custom language (e.g.,

Guilan) for the IP phone, configure the parameter
lang.gui = Guilan.
It configures the access URL of the custom LCD
language pack for the phone user interface.
Blank N
Example:
gui_lang.url =
It deletes the specified or all custom LCD
http://192.168.10.25/000.GUI.English.lang
language packs of the phone user interface.
Blank During the auto provisioning process, the IP N
phone connects to the HTTP provisioning server
Example:
192.168.10.25, and downloads the language
Delete all custom language packs of the phone
pack
It 000.GUI.English.lang.
configures the access URL of The
theEnglish
custom
user interface
translation
language pack for thewill
webbeuser
changed accordingly
interface.
Blank gui_lang.delete = http://localhost/all N
if you have modified the language template file.
Delete a custom language pack of the phone user
If you want to download multiple language packs
Example:
interface (e.g., 001.GUI.Chinese_S.lang)
to the phone=
wui_lang.url simultaneously, you can configure
http://192.168.10.25/1.English.js
gui_lang.delete
It =
asdeletes the specified
following:
During
or all custom web
the auto provisioning process, the IP
http://localhost/001.GUI.Chinese_S.lang
language packs
Blank gui_lang.url
phone connects = and note language packs of the
to the HTTP provisioning server N
web user interface.
http://192.168.10.25/000.GUI.English.lang
192.168.10.25, and downloads the language
gui_lang.url =
pack 1.English.js.
Example:
http://192.168.10.25/001.GUI.Chinese_S.lang
The
It English
enables orlanguage translation
disables the will be
call waiting changed
feature.
Delete all custom language packs of the web user
accordingly if you have modified the language
1 interface: N
template file.
0-Disabled
wui_lang.delete = http://localhost/all
If you want to download multiple language packs
1-Enabled
Delete
It a custom language IPpack of the webthe
user
toenables
the webor disables
user the simultaneously,
interface phone to play call
you can
interfacetone
waiting (e.g., 11.Russian.js):
when the IP phone receives an
1 configure
If as 0following:
it is set to (Disabled), a new incoming call is N
wui_lang.delete
incoming = http://localhost/11.Russian.js
call during a call.
wui_lang.url
automatically=rejected
http://192.168.10.25/1.English.js
by the IP phone with a
The corresponding note language pack (e.g.,
wui_lang.url
busy message = while
http://192.168.10.25/11.Russian.js
during a call.
11.Russian_note.xml) will also be deleted.
0-Disabled
It enables or disables the phone lock feature.
If it is set to 1 (Enabled), the LCD screen will
0 1-Enabled Y
present a new incoming call while during a call.
0-Enabled
If it is set to 1 (Enabled), the IP phone will
1-Disabled
perform
It enables anoraudible indicator
disables the BToEwhen receiving
(Better a
Together
new incoming
over Ethernet) call during a call.
feature.
1 If it is set to 0 (Enabled), the IP phone will prompt Y
the user to configure an n-digit unlock PIN at the
0-Disabled
initial sign-in.
call_waiting.enable is set to 1 (Enabled).
It configures the BToE paring PIN. Your phone can
1-Enabled
pair with Skype for Business Client when you
0000 enter the correct BToE paring PIN on PC. N
If it is set to 0 (Disabled), BToE is disabled on the
phone. Your phone cannot pair with Skype for
Business
It enablesClient.
or disables the IP phone to be used as
sip.btoe.enable is set to 1 (Enabled).
an audio device when BToE (Better Together over
0 Ethernet) is enabled in the VDI (Virtual Desktop N
Infrastructure) environment.
It configures the IP address of the server from
0-Disabled
which the IP phone receives the action URI
Blank requests. N
1-Enabled
Multiple IP addresses are separated by commas.
Note:
It We recommend
configures the intervalthat
(inyou set for
hours) thethevalue
IP of
For discontinuous IP addresses, multiple IP
this parameter
phone to be 1 (Enabled)
to automatically if youiswant
check if there a to
24 addresses are separated by commas. Y
use BToE update
firmware in the VDI environment.
available on Skype for Business
For continuous IP addresses, the format likes
Server.
*.*.*.* and the * stands for the values 0~255.
For
It example:
enables or disables the idle screen to display
If it is set to 1 (1 hour), the IP phone will check if
10.10.*.*
the standsLocation
notification for the IPisaddresses
not set whenthat range
the
1 a firmware update is available on the Skype for N
from 10.10.0.0
location to 10.10.255.255.
of the phone is not set.
Business Server every 1 hour. If there is an
update available, the phone will prompt for an
If left blank, the IP phone will reject any HTTP GET
0-Disabled
update.
It enables or disables the IP phone to suppress
request.
the display of DTMF digits during an active call.
0 1-Enabled N
If it is set to any, the IP phone will accept and
0-Disabled
handle HTTP GET requests from any IP address.
It enables or disables the IP phone to display the
1-Enabled
Example:
DTMF digits for a short period before displaying
0 features.action_uri_limit_ip
asterisks during an active call. = any N
If it is set to 1 (Enabled), the DTMF digits are
displayed
Note: as asterisks.
It works only if the value of the parameter
0-Disabled
It configures the repetition times
features.action_uri.enable is setfor
to the IP phone
1 (Enabled).
to send the end RTP Event packet during an
3 1-Enabled N
active call.
features.dtmf.hide is set to 1 (Enabled).
It enables or disables the IP phone to send DTMF
sequences for transfer function when pressing
0 the Tran/Transfer soft key or TRAN/TRANSFER N
key.
It configures the DTMF digits to be transmitted to
0-Disabled
perform call transfer. Valid values are: 0-9, *, #
Blank and A-D. N
1-Enabled
Example:
If it
It is set to
enables or0disables
(Disabled),
the the IP phone
IP phone will the
to obtain
features.dtmf.transfer = 123
perform
Skype forthe transferServer
Business as normal when
address pressing
from DHCP bythe
0 Tran/Transfer
detecting DHCPsoftoption
key or120.
TRAN/TRANSFER key N
during a call.
features.dtmf.replace_tran is set to 1 (Enabled).
0-Disabled
It enables
If it or1disables
is set to thethe
(Enabled), IP phone
IP phoneto download
will
the Root the
transmit CA using LDAP (Lightweight
designated DTMF digits Directory
to the server
0 1-Enabled N
Access Protocol).
for performing call transfer when pressing the
Tran/Transfer soft key or TRAN/TRANSFER key
0-Disabled
during a call.
It enables or disables the headset prior feature.
You need to press the HEADSET key to activate
0 1-Enabled N
the headset mode in advance.
0-Disabled
It enables or disables the dual headset feature.
0 1-Enabled N
0-Disabled
If it is set to 1 (Enabled), the headset mode will
1-Enabled
not
It be deactivated
configures until the
the duration user
time (inpresses
seconds)thefor
HEADSET
the key again.
busy tone. When one party releases the call,
0 If it is set to 1 (Enabled), users can use two N
a busy tone is audible to the other party
headsets on one phone. When the IP phone joins
If it is set to
indicating 0 (Disabled),
that the headset
the call connection mode can
breaks.
in a call, the users with the headset connected to
be deactivated by pressing the Speakerphone key
the
It headset or jack havethe
a full-duplex conversation,
orenables
0-0sthe HEADSET disables
key exceptIP the
phone to
HANDSETplay key.
a key
whilewhen
tone the users
a userwith the headset
presses a send connected
key. to the
1 handset jack are only allowed to listen to. N
3-3s
0-Disabled
5-5s
It enables or disables the IP phone to play a key
1-Enabled
tone when a user presses any key on your phone
1 If it is set to 3 (3s), a busy tone is audible for 3
keypad. N
If it is set to 1 (Enabled), the IP phone will play a
seconds on the IP phone.
key tone when a user presses a send key.
0-Disabled
It configures the ringer device for the IP phone.
0 1-Enabled N
features.key_tone
0-Use Speaker is set to 1 (Enabled).
If it is set to 1 (Enabled), the IP phone will play a
1-Use Headset
key
It tone when
enables a user the
or disables presses any key
IP phone on your
to play a
phone keypad.
warning tone when there is a call on hold.
1 2-Use Headset & Speaker N
0-Disabled
If the ringer device is set to Headset or
Headset&Speaker,
It the headset
configures the interval shouldat
(in seconds) bewhich
1-Enabled
connected
the IP phoneto play
the IP phone and
a warning thewhen
tone headset mode
there is a
30 also on
call should
hold.be activated in advance. N
If it is set to 30 (30s), the IP phone will play a

It configures the IP phone to continue to play the
warning tone every 30 seconds when there is a
dial tone after inputting the preset numbers on
Blank call on hold. N
the pre-dialing screen.
Example:
features.play_hold_tone.enable
It enables or disables the IP phoneistoset to 1an
mute
features.redial_tone = 123
(Enabled).
active call.
1 The IP phone will continue to play the dial tone N
after inputting 123 on the pre-dialing screen.
0-Disabled
If it is left blank, the IP phone will not play the dial
tone
It after or
enables inputting numbers
disables on thewith
the IP phone pre-dialing
active
1-Enabled
screen. to play dial tones differently from the IP
accounts
0 phone with no active accounts. N
0-Disabled
It enables or disables the IP phone to play a local
DTMF tone.
1 1-Enabled N
0-Disabled
1-Enabled
If it is set to 1 (Enabled), you can hear the DTMF

tone when pressing the IP phones keypad during
a call.
It enables or disables the IP phone to save the
call log.
1 N
0-Disabled
It configures the delay time (in seconds) for the IP
1-Enabled
phone to automatically display the search results
1 on the dialing screen. N
If it is set to 0 (Disabled), the IP phone cannot log
the placed calls, received calls, missed calls and
Example: sfb.search_delay_time = 3
the
It forwarded
configures calls
the in the
delay call
time (inlog lists. for the IP
seconds)
phone to automatically dial out the entered digits
8 without pressing a send key. N

It configures a ring tone for the IP phone.
phone_setting.predial_autodial is set to 1
Ring1.wav (Enabled). N
Example:
To configure a phone built-in ring tone (e.g.,
Ring1.wav):
It configures the access URL of the custom ring
phone_setting.ring_type = Ring1.wav
tone file.
Blank N
To configure a custom ring tone (e.g.,
Example:
Customring.wav):
ringtone.url =
phone_setting.ring_type
It deletes all custom ring=tone
Customring.wav
files.
tftp://192.168.1.100/Customring.wav
Blank Example: N
ringtone.delete = http://localhost/all
It enables or disables the live dialpad feature.
0 0-Disabled N
1-Enabled
It enables or disables the IP phone to deal with
the 180 SIP message received after the 183 SIP
1 If it is set to 1 (Enabled), the IP phone will N
message.
For T48G IP phones: automatically dial out the entered phone number
The default value is SIP- on the dialing screen without pressing a send key.
0-Disabled
T48G. It enables or disables the IP phone to reset to
For T46G IP phones: factory by long pressing OK key.
1 1-Enabled N
T46G. 0-Disabled
If it is set to 1 (Enabled), the IP phone will resume
For T42G IP phones: and
It play the the
configures localproduct
ringback toneofupon
name a phone.
the IP
The default value is SIP- 1-Enabled
subsequent
The product 180
name message received.
is displayed on the phone at
T42G. the path Menu->System Status->More- N
For T41P IP phones: >Phone->Product.
T41P. It configures the dial-now rule (the string used to
For T40P IP phones: match the numbers entered by the user).
Blank When entered numbers match the predefined N
T40P. dial-now rule, the IP phone will automatically dial
out the numbers without pressing the send key.
It configures the access URL of the dial-now rule
template file.
Blank Example: N
dialplan.dialnow.rule.1 = 123
Example:
dialplan_dialnow.url =
It configures the delay time (in seconds) for the
http://192.168.10.25/dialnow.xml
dial-now rule.
1 During the auto provisioning process, the IP N
When entered numbers match the predefined
phone connects to the provisioning server
dial-now rule, the IP phone will automatically dial
192.168.10.25, and downloads the replace dial-
out the entered number after the designated
now
It rule file
enables or dialnow.xml.
disables the power indicator LED to
delay time.
be turned on.
0 N
If it is set to 0, the IP phone will automatically dial
0-Disabled (power indicator LED is off)
out the entered number immediately.
It enables or disables the power indicator LED to
1-Enabled (power indicator LED is solid red)
flash when the IP phone receives a voice mail.
1 N
0-Disabled (power indicator LED does not flash)
1-Enabled (power indicator LED slow flashes
flash when the IP phone receives an incoming
1 (1000ms) red) N
call.
1-Enabled (power indicator LED fast flashes

(300ms) red)
be turned on when the IP phone is busy.
0 N
0-Disabled (power indicator LED is off)
1-Enabled (power indicator LED is solid red)
flash when a call is muted.
0 N
1-Enabled (power indicator LED fast flashes
flash when a call is placed on hold or is held.
0 (300ms) red) N
It configures the intensity of the LCD screen when
1-Enabled ( power indicator LED fast flashes
the phone is active.
8 (500ms) red) N
10 is the highest intensity.
It configures the LCDs intensity of the
T48G/T46G IP phone and the connected EXP40.
It configures the intensity of the LCD screen when
the phone is inactive.
1 N
0-Off
For
T48G/T46G/T42G/T41Pp It configures the delay time (in seconds) to
1-Low
hones: change the intensity of the LCD screen when the
IP phone is inactive. N
The default value is 0.
For T40P IP phones: 0-Always On
The default value is 30. It configures the contrast of the LCD screen.
1-Always Off (not applicable to T48G/T46G IP
6 phones) N
For T48G/T46G IP phones, it configures the LCDs
contrast of the connected EXP40 only.
15-15s
It enables or disables the phone to support name
For T40 IP phones, it configures the LCDs
30-30sup to 15 characters.
length
0 contrast of the IP phone. N
60-60s
0-Disabled
Note: We recommend that you set the contrast
of configures
It the LCD screen to 6name
the user as a more
of thecomfortable
user for
120-120s
1-Enabled
level.
phones web user interface access.
user N
300-300s
600-600s
It configures the user name of the administrator
for phones web user interface access.
admin 1800-1800s N
If it is set to 60 (60s), the intensity of the LCD

It configures
screen will bethe password
changed when of the
the user, var has
IP phone and
administrator
been inactivated for for
phones web user interface
60 seconds.
Blank access. N
The valid value format is username:new
password.
It enables or disables the IP phone to only trust
the server certificates in the Trusted Certificates
1 Example: Y
list.
security.user_password = user:123 means setting
the password of user (current user name is
0-Disabled
user)
It to password
configures the type123.
of certificates in the Trusted
Certificates list for the IP phone to authenticate
2 1-Enabled Y
Note:
for TLSIP phones support ASCII characters 32-
connection.
126(0x20-0x7E) in passwords. You can set the
If it is set to 0 (Disabled), the IP phone will trust
password Certificates
0-Default to be empty via web user interface
the
It server nothe
configures matter
typewhether the certificate
of the device sent
certificates for
only.
by the
the serverto
IP phone is send
valid for
or not.
TLS authentication.
0 1-Custom Certificates Y
If it is set to
0-Default 1 (Enabled), the IP phone will
Certificates
2-All Certificates
authenticate the server certificate based on the
It enables
trusted or disables
certificates the
list. IP phone
Only to mandatorily
when the
1-Custom Certificates
validate the CommonName
authentication succeeds, theorIPSubjectAltName
phone will trustof
0 the Y
the certificate
server. sent by the server.
0-Disabled
It configures the access URL of the custom
trusted certificate used to authenticate the
Blank 1-Enabled N
connecting server.
Example:
trusted_certificates.url =
http://192.168.1.20/tc.crt
Note: The certificate you want to upload must be

in *.pem, *.crt, *.cer or *.der format.
It deletes all uploaded trusted certificates.
Blank Example: N
trusted_certificates.delete = http://localhost/all
It configures the access URL of the certificate the
IP phone sends for authentication.
Blank N
Example:
server_certificates.url =
It deletes all uploaded server certificates.
http://192.168.1.20/ca.pem
Blank Example: N
Note: The certificate you want to upload must be
server_certificates.delete = http://localhost/all
in *.pem or *.cer format.
It configures the access URL for the custom
configuration files.
Blank Y
Note: The file format of custom configuration file
must be *.bin.
It enables or disables the IP phone to select
transfer-to party's call (a new call or another
1 existing call) during multiple calls when user N
presses the Tran/Transfer soft key or
TRAN/TRANSFER key.
It configures a return code and reason of SIP
response messages when the IP phone rejects an
603 0-Disabled N
incoming call. A specific reason is displayed on
the callers phone LCD screen.
1-Enabled
It configures the characters the IP phone filters
404-Not Found
If it is dialing.
when set to 1 (Enabled), the user can select to
,- transfer the active call to a new call or another N
480-Temporarily Unavailable
existing
If call during
the dialed numbermultiple
contains calls when the user
configured
presses
characters,the the
Tran/Transfer
IP phone will softautomatically
key or filter
486-Busy
It configures Here
the timeout interval (in minutes) for
TRAN/TRANSFER
these characters key.when dialing.
web access authentication.
5 603-Decline Y
If it is set to 0 (Disabled), the user can transfer
Example:
Example:
the active call to a new call during multiple calls
features.call_num_filter = ,(%!
If it is set to 486 (Busy =
features.relog_offtime Here), the callers phone
5 Tran/Transfer
when
If
It you the
dial user
configures 1010%,
the presses
"#" the
theorIP phone
"*" key will
as thefilter soft
send key
thekey.
LCD
If you screen willthe
log into display
web the message
user interface Busy Here
and leave it
or TRAN/TRANSFER key.
character % and dial out 1010.
1 when
for the callee
5 minutes, it rejects the incoming
will automatically logcall.
out. N
0-Disabled
Note: If it is left blank, the IP phone will not
automatically
1-# key filter any characters when dialing.
It enables
If you wantortodisables
filter justthe IP phone
a space, younot to send
have to set
any
the keypound key when pressing double
value to , (a space first followed by a #.
0 2-* N
comma).
0-Disabled (Send one pound key by pressing
If it is set to 0 (Disabled), neither # nor * can
double #)
beenables
It used asor the send key.
disables the IP phone to play a
warning tone when it receives a new voice mail.
1 1-Enabled (Do not send any pound key when N
If it is set to 1 (# key), the pound key is used as
pressing double #)
the send key.
0-Disabled
Note:
It It works only
configures if the value of the parameter
If it is set to 2the
1-Enabled
delay
(* key), time
the (in seconds)
asterisk before
key is used as
features.key_as_send
the is set to 1 (Enabled).
1 the IP phone
send key. automatically answers an incoming N
call.

It enables or disables the IP phone to lock the
"account.X.auto_answer" is set to 1 (Enabled).
account to prevent the account being signed in or
0 sign out randomly. N
0-Disabled
It enables or disables the IP phone to maintain
current status until you manually change it.
0 1-Enabled N
0-Disabled
If it is set to 1 (Enabled), the IP phone will prompt
forenables
It administrator password
or disables to sign
the user in or
to sign sign
into theout.
1-Enabled
Skype for Business Server using Device Pairing
1 for Online method. Y
Note: If your phone status is DND before dialing
an emergency number, then the phone status will
0-Disabled
beconfigures
It changed to available
the afterofthe
access URL theemergency call
firmware file.
even if the value of this parameter is set to 1
Blank 1-Enabled Y
(Enabled).
Example:
firmware.url = http://192.168.1.20/28.8.0.1.rom
It enables or disables the IP phone to be reset to
factory when you upgrade the phone firmware
Blank from a non-Skype for Business version to a Skype Y
for Business version.
It configures the access URL of the local contact
0-Disabled
file
It (*.xml).or disables the IP phone to display local
enables
Blank N
favorites
1-Enabledon the idle screen.
Example:
It configures the order of the local favorites on
local_contact.data.url
the =
The idle
0-Disabled
phonescreen.
will perform a factory reset after
http://192.168.10.25/contact.xml
upgrading only when it is set to 1 (Enabled) and
1 1-Preferential
1-Enabled
the parameter lync_license_dat.url is N
configured correctly. If the parameter
2-General
If it is set to 0 (Disabled),
lync_license_dat.url only
is not Skype forcorrectly,
configured Business
favorites
the phoneare willdisplayed
not perform on the idle screen.
a factory reset after
If it is set to 1 (Preferential), the local favorites
upgrading.
1 will besetdisplayed before the N
If it is to 0 (Disabled), theSkype
phone for Business
will not
favorites
perform aon the idle
factory screen.
reset after upgrading.
If it is set to 2 (General), the local favorites will be
displayed
It configures behind theof
the PIN Skype for Business
the CAP phone. The favorites
PIN is
Blank on thetoidle
used enterscreen.
the Advanced menu on the phone. N
sfb.local_favorite.enable is set to 1 (Enabled).
It enables or disables the calendar feature.
It configures the inactive time (in minutes) of the
1 0-Disabled Y
IP phone, after which the phone will change its
status to Inactive automatically.
1-Enabled
Example:
It
If configures the inactive user
time can
(in minutes) of the
5 If it
it is
is set
set toto 15,(Enabled),
the IP phone will use calendar
change its status N
IP phone,
feature onafter
the which
IP phone.the phone will change its
to Inactive automatically when inactive time
status
If it from
is set Inactive to Away automatically.
reaches
It enables 5toor0disables
(Disabled),
minutes. the user cannot
IP phones to use
play key
calendar
tone feature on
in following the IP phone.
situations:
Example:
Note:
For If you change this parameter, IP
T48G/T46G/T42G/T41P/T40P thephones:
IP phone
5 If it is set to 5, the IP phone whose status is
will reboot
Enter phone tonumbers
make thewithout
changepicking
take effect.
up the
N
Inactive will change to Away automatically after 5
handset.
minutes.
For T48G IP phones:
Note: If you change this parameter, the IP phone
0 Tap Dial icon to enter the pre-dialing screen, and N
will reboot to make the change take effect.
then enter phone numbers without picking up the
handset.
It enables or disables the zero touch for the IP
phone to configure the network parameters and
0-Disabled
0 provisioning server address via phone user N
interface
1-Enabledduring startup.
It configures the duration time (in seconds) for
0-Disabled
the IP phone to display Zero Touch screen during
5 startup. You can press the OK soft key to enter N
1-Enabled
configuration screen or the Cancel soft key to exit
Zero Touch screen.
It enables or disables the IP phone to prompt for
the administrator password when you long press
0 the OK key to perform factory reset on the idle N
screen.
It enables or disables the Import Factory
0-Disabled
Configuration feature.
0 N
1-Enabled
0-Disabled
It configures the access URL of the custom
1-Enabled
factory configuration files.
Blank Y
If it is set to 1 (Enabled), Import Factory
Configuration item will be displayed on the IP
features.custom_factory_config.enable is set to
phone's
It web the
configures usercodec
interface at the path
for multicast Settings-
paging.
1 (Enabled) and the file format of custom factory
>Configuration. You can import a custom
G722 configuration file must be *.bin. N
factory
Example: configuration file or delete the user-
defined factory configuration
multicast.codec = G722 via web user
interface.
It enables or disables the IP phone to handle the
incoming multicast paging calls when there is an
1 active multicast paging call on the IP phone. N
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the IP phone will ignore

the incoming multicast paging calls when there is
an active multicast paging call on the IP phone.
It configures the priority of the voice call (a
normal phone call rather than a multicast paging
10 call) in progress. N
It configures the label to be displayed on the LCD
0-Disabled
screen when receiving the multicast paging calls.
Blank 1-1 N
2-2
Example:
3-3
multicast.listen_address.1.label = Paging1
4-4
It configures the multicast address and port
5-5
number that the IP phone listens to.
Blank 6-6 N
7-7
Example:
8-8
multicast.listen_address.1.ip_address =
It
9-9configures the IP address and port number of
224.5.6.20:10008
the
10-10 multicast paging group in the paging list. It
Blank will be displayed on the LCD screen when placing N
Note: The valid multicast IP addresses range
the multicast paging call.
from 224.0.0.0 to 239.255.255.255.
If it
It is set to 0the
configures (Disabled),
name of all theincoming
multicastmulticast
paging
Example:
paging
group tocalls will be automatically
be displayed in the paging ignored
list. It when
will bea
Blank multicast.paging_address.1.ip_address
voice call is = N
displayed oninthe
progress.
LCD screen when placing the
224.5.6.20:10008
multicast paging calls.
multicast.paging_address.2.ip_address
If it is not set to 0(Disabled), the IP phone = will
224.1.6.25:1001
It configures
receive the the play multicast
incoming time of local ringback
paging call tonea
with
Example:
before
higher playing
or same the other
priority party's
than coloring
this to
value ringback
andICEignore
500ms multicast.paging_address.1.label
It enables or disables the phone = record
Product log. N
Note:
tone
that with The
when aa valid
call
lower multicast
is placed.
priority IP addresses
than this valuerangewhen a
from
voice 224.0.0.0 to 239.255.255.255.
call is in progress.
0-Disabled
Example:
features.local_ringback_tone_time = 500
1-Enabled
The IP phone will play a 500ms local ringback
0 N
tone before playing the other party's coloring
If
It it is set tone
enables
ringback to
or1disables
(Enabled),
when athe the
callIPissystem
phone
placed.tolog will
mandatorily
include the
validate theICE log.
CommonName or SubjectAltName of
If it is
the set to 0 (Disabled),
certificate sent by thethe system log will not
server.
1 include the ICE log. N
0-Disabled
It enables or disables the IP phone to obtain the
Skype for Business Server address via
1-Enabled
Autodiscover service.
1 N
0-Disabled
It enables or disables the IP phones to complete
automated functional test using Microsoft
1-Enabled
automated testing tools.
0 N
0-Disabled
1-Enabled
File
racket not support
Phone User Interface

Web User Interface
T42G/T41P/T40P T48G/T46G
Security->License->Upload
/ /
License File
Features->General
/ /
Information->DHCP Hostname
Menu->Advanced-
Network->Basic->IPv4 Config- >Network->WAN Port-
/
>PPPoE->User Name >IPv4->Type(PPPoE)-
>PPPoE User
Menu->Advanced-
Network->Basic->IPv4 Config- >Network->WAN Port-
/
>PPPoE->Password >IPv4->Type(PPPoE)-
>PPPoE Password
Network->PC Port->PC Port

/ /
Active
Network->Advanced->Port
/ /
Link->WAN Port Link
Network->Advanced->Port
/ /
Link->PC Port Link
Menu->Settings->Advanced Menu->Advanced-
Network->Basic->IPv4 Config- Settings->Network->WAN Port- >Network->WAN Port-
>Static DNS >IPv4->DHCP IPv4 Client->Static >IPv4->Type(DHCP)-
DNS >Static DNS
Network->Basic->IPv6 Config- Settings->Network->WAN Port- >Network->WAN Port-
>IPv6 Static DNS >IPv6->DHCP IPv6 Client->Static >IPv6->Type(DHCP)-
DNS >Static DNS
/ / /
Network->Advanced->VLAN-
Settings ->Network->VLAN- >Network->VLAN->WAN
>WAN Port->Active
>WAN Port->VLAN Status Port->VLAN Status
Settings->Network->VLAN->WAN >Network->VLAN->WAN
>WAN Port->VID (1-4094)
Port->VID Port->VID Number
Settings->Network->VLAN->WAN >Network->VLAN->WAN
>WAN Port->Priority
Port->Priority Port->Priority
Settings->Network->VLAN->PC >Network->VLAN->PC
>PC Port->Active
Port->VLAN Status Port->VLAN Status
>PC Port->VID (1-4094)
Port->VID Port->VID Number
>PC Port->Priority
Port->Priority Port->Priority
Settings ->Network->VLAN- >Network->VLAN->DHCP
>DHCP VLAN->Active
>DHCP VLAN->DHCP VLAN VLAN->DHCP VLAN
Settings->Network->VLAN- >Network->VLAN->DHCP
>DHCP VLAN->Option (1-255)
>DHCP VLAN->Option VLAN->Option
For T48G:
Menu->Advanced-
>Network->Web Server-
Menu->Settings->Advanced
Network->Advanced->Web >HTTP Port
Settings->Network->Webserver
Server->HTTP Port (1~65535) For T46G:
Type->HTTP Port For T48G:
Menu->Advanced-
Menu->Advanced-
>Network->Webserver
Menu->Settings->Advanced Type->HTTP Port
Network->Advanced->Web >HTTPS Port
Server->HTTPS Port (1~65535) For T46G:
Type->HTTPS Port For T48G:
Menu->Advanced-
Menu->Advanced-
>Network->Webserver
Menu->Settings->Advanced Type->HTTPS Port
Network->Advanced->Web >HTTPS Status
Server->HTTPS For T46G:
Type->HTTPS Status For T48G:
Menu->Advanced-
Menu->Advanced-
>Network->Webserver
Menu->Settings->Advanced Type->HTTPS Status
Network->Advanced->Web >HTTP Status
Server->HTTP For T46G:
Type->HTTP Status
Menu->Advanced-
>Network->Webserver
Type->HTTP Status
Network->Advanced->Voice
/ /
QoS->Voice QoS (0~63)
Network->Advanced->Voice
/ /
QoS->SIP QoS (0~63)
Network->Advanced->802.1x-
Settings->Network->802.1x >Network->802.1x-
>802.1x Mode
Settings->802.1x Mode >802.1x Mode
Settings->Network->802.1x >Network->802.1x-
>Identity
Settings->Identity >Identity
Settings->Network->802.1x >Network->802.1x->MD5
>MD5 Password
Settings->MD5 Password Password
/ /
>CA Certificates
/ /
>Device Certificates
Network->Advanced->LLDP-
Settings->Network->LLDP->LLDP >Network->LLDP->LLDP
>Active
Status Status
Network->Advanced->LLDP-
Settings->Network->LLDP- >Network->LLDP->Packet
>Packet Interval (1~3600s)
>Packet Interval Interval
Network->Advanced->CDP-
Settings->Network->CDP->CDP >Network->CDP->CDP
>Active
Status Status
Network->Advanced->CDP-
Settings->Network->CDP- >Network->CDP->Packet
>Packet Interval (1~3600s)
>Packet Interval Interval
Network->Advanced->Span to
/ /
PC->Span to PC Port
Settings->Configuration-
/ /
>Export System Log
/ /
>Server Name
/ /
>System Log Level
Settings->Auto Provision-
/ /
>Power On
Settings->Auto Provision->PNP
/ /
Active
/ / /
/ / /
/ /
>DHCP Active
/ /
>Custom Option(128~254)
/ /
>DHCP Option Value
/ /
>Repeatedly
/ /
>Interval(Minutes)
/ /
>Weekly
Settings->Auto Provision->Day
/ /
of Week
/ /
>Time
/ /
>Time
/ /
>Server URL
/ /
>User Name
/ /
>Password
/ / /
/ /
>Common AES Key
/ /
>MAC-Oriented AES Key
Settings->Preference->Watch
/ /
Dog
Settings->Voice->Echo
/ /
Cancellation ->VAD
/ /
Cancellation ->CNG
Cancellation->ECHO / /
Settings->Voice->JITTER
/ /
BUFFER->Type
/ /
BUFFER->Min Delay
/ /
BUFFER->Max Delay
/ /
BUFFER->Normal
Settings->Tones->Select
/ /
Country
Settings->Tones->Dial / /
Settings->Tones->Ring Back / /
Settings->Tones->Busy / /
Settings->Tones->Congestion / /
Settings->Tones->Call Waiting / /
Settings->Tones->Dial Recall / /
Settings->Tones->Info / /
Settings->Tones->Stutter / /
Settings->Tones->Auto Answer / /
Settings->Preference->Languag/ /
Menu->Settings->Basic Settings-
/ Menu->Basic->Language
>Language
/ / /
/ / /
/ / /
/ / /
Features->General Menu->Features->Call Waiting- Menu->Features->Call

Information->Call Waiting >Call Waiting Waiting->Call Waiting
Features->Audio->Call Waiting Menu->Features->Call Waiting- Menu->Features->Call

Tone >Play Tone Waiting->Play Tone
Menu->Settings->Advances Menu->Advanced->Phonce
Settings->Phone Lock
Settings->Phonce Lock Lock->Lock the phone
Menu->Settings->Advances Menu->Advanced->BToE-
Settings->BToE->BToE
Settings->BToE->BToE >BToE
Menu->Settings->Advances Menu->Advanced->BToE-
Settings->BToE->BToE paring
Settings->BToE->BToE Paring PIN >BToE Paring PIN
Features->Audio->BToE as
/ /
Audio Device (VDI support)
Features->Remote Control-
/ /
>Action URI allow IP List
Features->General information
/ /
->Update Checking Time
Features->General information
/ /
->E911 Location Tip
Features->General
Information->Suppress DTMF / /
Display
Features->General
Information->Suppress DTMF / /
Display Delay
Features->General
/ /
Information->DTMF Repetition
Features->General
Information->DTMF Replace / /
Tran
Features->General
/ /
Information->Tran Send DTMF
Features->General
Information->Use DHCP Option / /
120
/ / /
Features->General
/ /
Information->Headset Prior
Features->General
/ /
Information->Dual-Headset
Features->General
Information->Busy Tone Delay / /
(Seconds)
Features->Audio->Send Sound / /
Features->Audio->Key Tone / /
Features->Audio->Ringer
/ /
Device for Headset
Features->General
/ /
Information->Play Hold Tone
Features->General
Information->Play Hold Tone / /
Delay
Features->Audio->Redial Tone / /
Features->General
/ /
Information->Allow Mute
/ / /
Features->General
Information->Play Local DTMF / /
Tone
Features->General Menu->Features->History Menu->Features->History
Information->Save Call Log Setting->History Record Record
Features->General
Information->Dial Search / /
Delay
/ / /
Settings->Preference->Ring Menu->Settings->Basic Settings- Menu->Basic->Sound-

Type >Ring Tones >Ring Tones
Settings->Preference->Upload
/ /
Ringtone
/ / /
Settings->Preference->Live
/ /
Dialpad
Features->General
Information->180 Ring / /
Workaround
/ / /
Menu->System Status->More- Menu->Status->Phone-

/
>Phone->Product >Product Name
Settings->Dial Plan->Dial-now-
/ /
>Rule
/ / /
Features->General
Information->Time-Out for / /
Dial-Now Rule
Features->Power LED-
/ /
>Common Power Light On
Features->Power LED->Voice
/ /
Mail Power Light Flash
/ /
>Ringing Power Light Flash
/ /
>Talk/Dial Power Light On
Features->Power LED->Mute
/ /
Power Light Flash
/ /
>Hold/Held Power Light Flash
Menu->Basic->Display-
Settings->Preference-
/ >Backlight->Backlight
>Backlight Active Level
Active Level
Menu->Basic->Display-
Settings->Preference-
/ >Backlight->Backlight
>Backlight Inactive Level
Inactive Level
/ / /
Menu->Settings->Basic Settings- Menu->Basic->Display-

/
>Display->Contrast >Contrast
/ / /
/ / /
/ / /
Security->Password / /
Security->Trusted Certificates-
>Only Accept Trusted / /
Certificates
/ /
>CA Certificates
Security->Server Certificates-
/ /
>Device Certificates
/ /
>Common Name Validation
/ /
>Load trusted certificates file
/ / /
Security->Server Certificates-
/ /
>Load server cer file
/ / /
Settings->Configuration->
/ /
Export or Import Configuration
Features->General
Information->Allow Trans Exist / /
Call
Features->General
Information->Return Code / /
When Refuse
Features->General
Information->Call Number / /
Filter
Features->General
Information->Auto-Logout / /
Time(1~1000min)
Features->General Menu->Features->Key as
Menu->Features->Key as send
Information->Key As Send Send
Features->General
/ /
Information->Send Pound Key
Features->General
/ /
Information->Voice Mail Tone
Features->General
Information->Auto-Answer / /
Delay(1~4s)
Account->Basic->Account Lock
Settings->Account Lock >Account Lock
Account->Basic->Always On Menu->Settings->Basic Settings- Menu->Basic->Always

Line >Always Online Online->Always Online
Features->General
Information->Device Pairing / /
for Online
Settings->Upgrade->Select
/ /
and Upgrade Firmware
/ / /
Directory->Local Directory-
/ /
>Import Local Contact File
Directory->Settings->Local
/ /
Favorite
Directory->Settings->Local
/ /
Favorite
Sign in->PIN Authentication-

Sign in->PIN sign in-
/ >Extension->Extension PIN-
>extension->pin->New PIN
>New PIN
/ / /
Features->General
/ /
Information->SFB Away Time
Features->General
/ /
Information->SFB Away Time
Features->Audio->Pre Dial
/ /
Tone
/ /
>Zero Active
/ /
>Wait Time(1~100s)
/ / /
/ / /
/ /
>Import Factory Configuration
Features->General
/ /
Information->Multicast Codec
Directory->Multicast IP-
/ /
>Paging Priority Active
/ /
>Paging Barge
/ /
>Multicast Listening->Label
>Multicast Listening- / /
>Listening Address
Directory->Multicast IP- Menu->Features->Paging List- Menu->Features->Paging

>Paging List->Paging Address >Option->Edit->Address List->Edit->Address
Directory->Multicast IP- Menu->Features->Paging List- Menu->Features->Paging

>Paging List->Label >Option->Edit->Label List->Edit->Label
/ / /
/ / /
/ /
>Common Name Validation
/ / /
Features->General
Information->Enable SFB / /
Automation
Further Reference


Yealink IP Phones Auto Provisioning Guide

Yealink Configuration Encryption Tool User

Guide

Guide

Guide






/
/

Using Security Certificates on Yealink IP Phones
/
Time Zone
-11
-10
-9:30
-9
-8
-7
-6
-5
-4:30
-4
-3:30
-3
-2:30
-2
-1
+1
+2
+3
+3:30
+4
+4:30
+5
+5:30
+5:45
+6
+6:30
+7
+8
+8:45
+9
+9:30
+10
+10:30
+11
+11:30
+12
+12:45
+13
+13:30
+14
Time Zone Name
Samoa
United States-Hawaii-Aleutian, United States-Alaska-Aleutian
French Polynesia
United States-Alaska Time
Canada(Vancouver,Whitehorse), Mexico(Tijuana,Mexicali), United States-Pacific Time
Canada(Edmonton,Calgary), Mexico(Mazatlan,Chihuahua), United States-MST no DST, United
States-Mountain Time
Canada-Manitoba(Winnipeg), Chile(Easter Islands), Mexico(Mexico City,Acapulco), United States-
Central Time
Bahamas(Nassau), Canada(Montreal,Ottawa,Quebec), Cuba(Havana), United States-Eastern Time
Venezuela(Caracas)
Canada(Halifax,Saint John), Chile(Santiago), Paraguay(Asuncion), United Kingdom-
Bermuda(Bermuda), United Kingdom(Falkland Islands), Trinidad&Tobago
Canada-New Foundland(St.Johns)
Argentina(Buenos Aires), Brazil(DST), Brazil(no DST), Denmark-Greenland(Nuuk)
Newfoundland and Labrador
Brazil(no DST)
Portugal(Azores)
Denmark-Faroe Islands(Torshavn), GMT, Greenland, Ireland(Dublin), Morocco,
Portugal(Lisboa,Porto,Funchal), Spain-Canary Islands(Las Palmas), United Kingdom(London)
Albania(Tirane), Austria(Vienna), Belgium(Brussels),Caicos, Chad, Croatia(Zagreb), Czech

Republic(Prague), Denmark(Kopenhagen), France(Paris), Germany(Berlin), Hungary(Budapest),
Italy(Rome), Luxembourg(Luxembourg), Macedonia(Skopje), Namibia(Windhoek),
Netherlands(Amsterdam), Spain(Madrid)
Estonia(Tallinn), Finland(Helsinki), Gaza Strip(Gaza), Greece(Athens), Israel(Tel Aviv),

Jordan(Amman), Latvia(Riga), Lebanon(Beirut), Moldova(Kishinev), Romania(Bucharest),
Russia(Kaliningrad), Syria(Damascus), Turkey(Ankara), Ukraine(Kyiv, Odessa)
East Africa Time, Iraq(Baghdad), Russia(Moscow)
Iran(Teheran)
Armenia(Yerevan), Azerbaijan(Baku), Georgia(Tbilisi), Kazakhstan(Aktau), Russia(Samara)
Afghanistan(Kabul)
Kazakhstan(Aqtobe), Kyrgyzstan(Bishkek), Pakistan(Islamabad), Russia(Chelyabinsk)
India(Calcutta)
Nepal(Katmandu)
Kazakhstan(Astana, Almaty), Russia(Novosibirsk,Omsk)
Myanmar(Naypyitaw)
Russia(Krasnoyarsk), Thailand(Bangkok)
Australia(Perth), China(Beijing), Russia(Irkutsk, Ulan-Ude), Singapore(Singapore)
Eucla
Japan(Tokyo), Korea(Seoul), Russia(Yakutsk,Chita)
Australia(Adelaide), Australia(Darwin)
Australia(Brisbane), Australia(Hobart), Australia(Sydney,Melboume,Canberra), Russia(Vladivostok)
Australia(Lord Howe Islands)

New Caledonia(Noumea), Russia(Srednekolymsk Time)
Norfolk Island
New Zealand(Wellington,Auckland), Russia(Kamchatka Time)
New Zealand(Chatham Islands)
Tonga(Nukualofa)
Chatham Islands
Kiribati

Yealink Microsoft Skype For Business Edition IP Phones Description of Configuration Parameters in CFG Files V8.21

Uploaded by

Copyright:

Available Formats

Yealink Microsoft Skype For Business Edition IP Phones Description of Configuration Parameters in CFG Files V8.21

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Yealink Microsoft Skype For Business Edition IP Phones Description of Configuration Parameters in CFG Files V8.21

Uploaded by

Copyright:

Available Formats

Auto Provision Configuration files

1. Add newly released SIP-T46G, SIP-T42G, SIP-T41P, SIP-T40P IP phones. And

2. Add the following paramters:

3. Delete the following paramters:

String within 128

String within 128

String within 128

Integer from -300

URL within 511

network.ipv6_internet_port.ip Y IPv6 address

IPv6 network.ipv6_internet_port.gateway Y IPv6 address

network.ipv6_primary_dns Y IPv6 address

network.ipv6_secondary_dns Y IPv6 address

network.internet_port.ip Y IPv4 address

network.internet_port.mask Y Subnet Mask

network.internet_port.gateway Y IPv4 address

network.primary_dns Y IPv4 address

network.secondary_dns Y IPv4 address

: y000000000036.cfg T40P: y000000000054.cfg

Default Value Description Reboot

Phone User Interface

Account->Register- Sign in->User Sign in- User Sign in->Sign-in

Account->Register- Sign in->User Sign in- User Sign in->User

Account->Register- Sign in->User Sign in- User Sign in-

Account->Codec / / Yealink IP phones Administrator Guide

Account->Codec / / Yealink IP phones Administrator Guide

Account->Codec / / Yealink IP phones Administrator Guide

/ / / Yealink IP phones Administrator Guide

Account->Basic->Auto Menu->Features->Auto Menu->Features-

/ / / Yealink IP phones Administrator Guide

Menu->Settings->Basic Menu->Basic->Date &

Settings->Time & Date-

Menu->Settings->Basic Menu->Basic->Date &

Settings->Time & Date-

Settings->Time & Date-

Settings->Time & Date-

Settings->Time & Date-

Settings->Time & Date-

/ / / Yealink IP Phones Administrator Guide

N(T42G/T41P/T40 String within

N(T42G/T41P/T40 String within

URL within 511

URL within 511

URL within 511

Autop_Aes Key auto_provision.aes_key_16.com Y 16 characters

Echo Cancellation voice.cng Y 0 or 1

URL within 511

Phone Lock sfb.phone_lock.enable Y 0 or 1

BToE sip.btoe.secure_pin Y String

Update Checking Integer from 1

Features_ Audio Settings

URL within 511

Phone Full Display phone_setting.name_full_display.enable Y(T48G) 0 or 1

URL within 511

URL within 511

Custom URL within 511

Features_Transfer transfer.multi_call_trans_enable N(T48G/T46G) 0 or 1

404, 480, 486

URL within 511