1010 kVA

Specification sheet
Diesel Generator Set

K38 Series
808 kWe, 1010 kVA Prime
Reliable and durable

Cummins K38 series diesel engine with strong
regrindable crankshaft, high strength connecting
rod, low pressure fuel lines, STC (Step Timing
Controls) injectors and high volume coolant system
make K38 series generating sets, more reliable
and durable. Engines have clocked millions of
hours, operating in some of the worlds most
demanding conditions. Current engines are regularly
upgraded with new technologies for better
performance and economy. The ultimate proof of
superior performance and reliability is the fact that
Cummins entities worldwide source these engines
from Cummins India for their markets.
Unmatched warranty
- Cummins K38 series diesel engine generator
sets are a truly cost effective solution to long term
power need backed by industry best, 2 years / 5000
hrs warranty, for the entire generating set.
- With superior experience in
technology, design capability
and commitment reliability and
quality we offer an unmatched
5 years or 5000 hours (including
above 2 years) warranty
coverage on 5 critical components
(5C) of the engine Cylinder Head, Camshaft,
Crankshaft, Cylinder Block, Connecting Rod against
manufacturing defect
Cummins advantage
Special features of Cummins K38 series engines
like STC (Step Timing Controls) injectors, low
temperature aftercooler, square cumbustion
chamber, optimised turbocharging and precision
heavy duty camshaft make these engines the
ultimate in exceptional fuel efficiency all across the
operating range.
Single source power assurance

Design, manufacture and testing of engine,
alternator and other accessories is done by
Cummins Group of companies for optimum
performance and is backed by a countrywide
product support network with a single source
responsibility for the entire package.
Standard scope
Engine: Cummins K38 series direct injection, water
cooled engine, 12 cylinder, 4 stroke, rated at 1500 RPM,
conforming to ISO 3046 has the following specifications:
- Cummins PT fuel pump
- Cummins STC injectors
- Cummins turbocharger, Pulse tuned exhaust manifold,
Stainless steel exhaust flexible connections
- Radiator or Heat exchanger, Coolant inhibitor,
- Plate type lube oil cooler
- Outboard aftercoolers
- Full flow paper element filters - fuel, lube oil and by-pass
- Dry type replaceable paper element air cleaner with
restriction indicator
- Flywheel housing & flywheel to suit single / double
bearing alternator
- Flexible coupling for double bearing alternator
- Starting motor Electric, Battery charging alternator
- Electronic control panel
- Cummins PowerCommand microprocessor based
genset controller
- First fill lube oil
Alternator: Stamford brushless AC alternator
-
Seperately excited, self-regulated

Class H insulation
Salient pole revolving field
Single / double bearing
Automatic voltage regulator
PMG standard
Accessories:
-
Silencer suitably optimized to reduce noise

Sturdy base rail
990 ltrs. free standing fuel tank
Suitable batteries with connecting leads and terminals
Optionals
Engine: Heavy duty air cleaner, Lube oil / Coolant heater
with thermostatic switch
Alternator: Space heater, RTDs, BTDs
Control Panel: AMF control panel, Battery charger,
Remote/Auto start panel, Auto/Manual synchronizing panel,
Audio/Visual annunciation for faults
Control panel: PowerCommand PC 3.3

The PowerCommand control system is
an integrated microprocessor based
generator set control system providing
voltage regulation, engine protection,
alternator protection, operator interface
and isochronous governing.
Alternator data
- Line-to-neutral and line-to-line AC volts
- 3-phase AC current
- Frequency
- kW, kvar, power factor kVA (three phase and total)
Engine data
- DC voltage
- Engine speed
- Lube oil pressure
- Coolant temperature/ low level
- Comprehensive FAE data (where applicable)
Other data
- Genset model data
- Start attempts, starts, running hours, kW hours
- Load profile (operating hours at % load in 5% increments)
- Fault history
- Data logging and fault simulation (requires InPower)
AmpSentry Includes integral AmpSentry protection, which

provides a full range of alternator protection function which are
matched to the alternator provided.
Standard control functions
Power management Control function provides battery

monitoring, testing and a smart starting control system.
Digital governing
- Integrated digital electronic isochronous governor
- Temperature dynamic governing
Advanced control methodology Three phase sensing, FET

based full wave rectified voltage regulation and a PWM output for
stable operation with all load types.
Communications interface Control comes standard with
PCCNet and Modbus interface.
Regulation compliant Prototype tested: UL, CSA and CE
compliant.
Service - InPower PC-based service tool available for
detailed diagnostics, setup, data logging and fault simulation.
Reliable design For reliable operations in harsh environment.
Multi-language support
Independent of PC/ laptop for setting up
Operator panel features

Operator panel features The operator panel, in addition to
the alternator, displays the Utility/ AC Bus data.
Operator/ display functions
- 320 x 240 pixels graphic LED backlight LCD with bar graph for
displaying electrical parameters
- Auto, manual, start, stop, fault reset and lamp test/panel lamp
switches
- Alpha-numeric display with pushbuttons
- LED lamps indicating genset running, remote start, not in auto,
common shutdown, common warning, manual run mode, auto
mode and stop
Paralleling control functions
- Digital frequency synchronization and voltage matching
- Isochronous kW and kvar load sharing controls
- Droop kW and kvar control
- Sync check
- Extended paralleling (Peak Shave/Base Load)
- Digital power transfer control (AMF) provides load transfer
operation in open or closed transition or soft (ramping) transfer
mode
Digital voltage regulation

- Integrated digital electronic voltage regulator
- 3-phase, 4-wire line-to-line sensing
- Configurable torque matching
AmpSentry AC protection
- AmpSentry protective relay
- Over current and short circuit shutdown
- Over current warning
- Single and three phase fault regulation
- Over and under voltage shutdown
- Over and under frequency shutdown
- Overload warning with alarm contact
- Reverse power and reverse var shutdown
- Field overload
Engine protection
- Battery voltage monitoring, protection and testing
- Over speed shutdown
- Low oil pressure warning and shutdown
- High coolant temperature warning and shutdown
- Low coolant level warning or shutdown
- Low coolant temperature warning
- Fail to start (over crank) shutdown
- Fail to crank shutdown
- Cranking lockout
- Sensor failure indication
- Low fuel level warning or shutdown
Control functions
- Time delay start and cool down
- Real time clock for fault and event time stamping
- Exerciser clock and time of day start/stop
- Data logging
- Cycle cranking
- Load shed/ dump as per configurable priority
- Configurable inputs and outputs (4)
- Remote emergency stop
Options
- Auxiliary output relays and remote annunciators
Technical Data
Generator set specifications

Model
Prime Power Rating kVA
Output Voltage and Frequency
Power Factor
No. of phases
C1010 D5 P
1010
415 Volts, 50 Hz
0.8 (lag)
3 phase
Engine specifications
Make
Model
No. of cylinders
Aspiration
Bore and Stroke
Displacement
Output - Prime
Fuel consumption @ 75% load with Radiator & Fan
Fuel consumption @ 100% load with Radiator & Fan
Lube oil consumption @ full load
Total wet weight ( engine + radiator)
Length x Width x Height (engine)
Compression Ratio
Piston Speed
Governor / Class
Lubricating oil sytem capacity
Coolant capacity (engine + radiator)
Combustion air intake @ 100% load (+/- 5%)
Fan air flow across radiator
Exhaust Temperature
Cummins
KTA 38 G5
12 Vee
Turbocharged-Aftercooled
159 mm x 159 mm
37.8 ltrs
1180 bhp (880 kWm)
153.3 ltr/hr
203.8 ltr/hr
0.24 ltr/hr
6000 kg
2265 x 1400 x 1658 mm
13.9:1
7.95 m/s
Electronic / A1
145 ltrs
260 ltrs
66.9 m3/min
1431.3 m3/min
500 oC
Alternator specifications
Make
Frame size / Model No.
Voltage Regulation
Insulation
Standard Enclosure
Winding Pitch
Stator Winding
Rotor
Wave form distortion
Telephone interference Factor
Total Harmonic Factor
Stamford
HC6Y
+ 0.5%
Class H
IP 23
2 / 3 Pitch
Double layer lap
Dynamically balanced
No load < 1.8 %, no distorting /
balanced linear load < 5 %
Better than 50
Better than 2%
Conformance standards
IS/IEC 60034-1,IS 1460, ISO 8528, ISO 3046, IS 13018, ISO 9001
Rating definitions
Prime Power (PRP):
Applicable for supplying power to varying electrical load for unlimited hours. Prime Power (PRP) is in accordance with ISO 8528. Ten
percent overload capability is available in accordance with ISO 3046.
- Fuel consumption data is based on diesel having specific gravity of 0.85 and conforming to IS:1460
- Oil consumption data is based on oil having specific gravity of 0.89 and meeting CH4 API categories
- Fuel consumption tolerance is +5%
Typical diesel genset dimensions*

Genset Model
C1010 D5 P
Rating
(kVA)
1010 kVA
Length
(mm)
5660
Width
(mm)
2205
Height
(mm)
2686
Weight
(kgs.)
9700 (with PCC)
Std Fuel Tank Capacity

Ltrs - External
990
Authorised Representative
Cummins Power Generation Offices

Bengaluru:
Chandigarh:
Chennai:
Gurgaon:
Hyderabad:
Jaipur:
Kolkata:
Lucknow:
Mohali:
Vadodara:
Tel.: (080) 2325 9161 / 63, 2325 9165 / 67

Fax: (080) 2325 9164
Tel.: (0172) 224 0371-73
Fax: (0172) 224 0372
Tel.: (044) 2446 8110 / 2446 8113
Fax: (044) 2491 1120
Tel.: (0124) 391 0900-01
Fax : (0124) 391 0916
Tel.: (040) 2340 9970 / 2340 9980
Fax. (040) 2340 9990
Tel.: (0141) 236 4944
Fax: (0141) 403 8794
Tel.: (033) 2287 8065 / 2287 2481
Fax: (033) 2290 3839
Tel.: (0522) 230 5049 / 230 5059
Fax: (0522) 230 5035
Tel.: (0172) 224 0371 / 72 / 73
Fax: (0172) 224 0371 / 72 / 73
Tel.: (0265) 233 0627 / 3053627
Fax: (0265) 234 0623
Visit our facebook page at :

Cummins Power Generation India
Our energy working for you.

2015 Cummins Power Generation Inc. All rights reserved.
Cummins Power Generation and Cummins are registered trademarks of Cummins Inc.
PowerCommand, AmpSentry, InPower and are trademarks of Cummins Power Generation.
Other company product or service names may be trademarks or service marks of others.
Specifications are subject to change without notice.
PGBU/003/K38 1010 kVA/SA/NM/August 2015
Cummins India Limited

Power Generation Business Unit
Cummins India Office Campus
Tower-A, 6th Floor, S. No. 21,
Balewadi, Pune 411 045 (India)
Email: [email protected]
www.cumminsindia.com

1010 kVA

Uploaded by

Copyright:

Available Formats

1010 kVA

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

1010 kVA

Uploaded by

Copyright:

Available Formats

Specification sheet

Diesel Generator Set

Reliable and durable

Single source power assurance

Seperately excited, self-regulated

Silencer suitably optimized to reduce noise

Control panel: PowerCommand PC 3.3

AmpSentry Includes integral AmpSentry protection, which

Standard control functions

Power management Control function provides battery

Advanced control methodology Three phase sensing, FET

Operator panel features

Digital voltage regulation

Generator set specifications

Typical diesel genset dimensions*

Std Fuel Tank Capacity

Cummins Power Generation Offices

Tel.: (080) 2325 9161 / 63, 2325 9165 / 67

Visit our facebook page at :

Our energy working for you.

Cummins India Limited

You might also like