A World of Difference

TM

Waterproofing Systems

BENTO-PRO PLUS
Free-standing Poured Walls
Bento-Pro Plus rolls are installed either vertically or horizontally with the bentonite layer to the structure, by nailing across the top every 20" (0.51m) minimum, lapping seam edges 1-1/2" (3.8cm) and nailing vertical seam edges every 3 (0.9m) minimum with washer head masonry nails. Seal all overlap edges with Bento-Pro Seam Tape or Ecoline S or T. Pour a 1-1/2" (3.8cm) cove at juncture of wall and footing using EPRO Bento-Pro Granular or Ecoline T prior to roll application. Compact backfill to minimum 85% Modified Proctor. A protection course is not required for most applications. For special applications, contact EPRO for details.

Bentonite Composite Waterproofing System

Blind-Side (Soldier Beam & Lagging or Shot-Crete)

Blind-Side (Soldier Beam & Lagging) and Slab

Product Description

Bento-Pro Plus is a multi-layer sheet waterproofing system consisting of a self-sealing, expandable layer of granular bentonite laminated to an impermeable high density polyethylene film with a protective layer of non-woven polypropylene laminated to the bentonite. This three layer composite forms a high performance waterproofing system that is tough, self-sealing, vapor impermeable and able to withstand inclement weather, hydrostatic conditions and other factors encountered in todays construction environment.

Bento-Pro Plus rolls are installed either vertically or horizontally with the bentonite layer to the concrete structure (facing out). For poured concrete, lap joints 3" (7.6cm) shingle fashion (top over bottom). For shot-crete, lap joints 4" (10.2cm) reverse shingle fashion (bottom over top). Nail or box staple all overlap seams at 4" (10.2cm) O.C. Detail all tiebacks & penetrations with Epro Ecoline S (spray) or Ecoline T (trowel) as recommended by EPRO.

Under Structural Slab, Split Slab

Basic Uses

Install over prepare sub-grade compacted to 85% Modified Proctor or mud slab. Roll out membrane with bentonite side up. Overlap and stagger seams minimum 3" (7.6 cm). Fasten seams with box staples. For all penetrations and moisture/gas vapor barrier, detail penetrations and seams with Ecoline S (spray) or R (roller) as recommended by EPRO. For split slab construction, slab thickness shall be 3" (7.6cm) minimum. Protect area from flooding prior to concrete pour. Roll size is 3.5 x 21.5 (1.1m x 6.6m) or 75 sq. ft. (7m2). Custom size rolls are available by special order. Contact EPRO for details.

Bento-Pro Plus is highly effective when waterproofing below-grade free-standing walls, under slabs, tunnels, elevator pits and blindside applications including lagging, caissons, sheet pile and shot-crete retention systems. Applications include most all below-grade concrete structures requiring a high performance waterproofing system that protects against water intrusion from hydrostatic head, gas and vapor intrusion and is able to resist damage during construction from inclement weather and extreme construction techniques.

Packaging

Installation

For complete installation guidelines, please contact EPRO, ask your EPRO technical representative or visit our website for details.

Preparatory Work

Examine all surfaces prior to application. Remove all debris, standing water, nails and other sharp protrusions over 1/4" (6.4 mm). On freestanding walls, fill voids and/or honeycomb areas with EPRO Ecoline T. For blind-side applications, fill all voids in lagging larger than 1" (2.5 cm) with grout or cover with plywood prior to installation. EPRO EcoDrain is recommended for covering large areas of voids and/ or irregular surfaces on blind-side applications.
rev.: bentopro+ 06.21.12

Structural Slab with Blind-Side Walls

EPRO SERVICES, INC.

A World of Difference
TM

Phone: 800-882-1896
Fax: 316-262-2529 Web: www.eproserv.com

Waterproofing Systems

A World of Difference
TM

Waterproofing Systems

BENTO-PRO PLUS
EPRO warrants these products to be free from defects. EPRO makes no other warranties with respect to these products, expressed or implied, including without limitation the implied warranties of MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. EPROs liability shall be limited in all events to supplying sufficient product to re-treat the specific area to which defective product has been applied. EPRO shall have no other liability, including liability for incidental or resultant damages, whether due to breach of warranty or negligence. This warranty may not be modified or extended by representatives of EPRO or its distributors.

Storage

Protect from moisture and rainfall. Store on skid or pallet and cover with tarp.

Warranty

Availability

Available world-wide through EPRO Distributors. 800-882-1896 or www.eproserv.com for details.

Contact EPRO at

Limitations

Bento-Pro Plus is resistant to many common contaminants found in soil and water. Contact EPRO for soil and water compatibility testing. Bento-Pro Plus requires a minimum compaction or confinement of 24 psf to perform effectively.

Typical Physical Properties

Membrane ...................................................................................................... 20 mil Virgin Resin HDPE Bentonite ....................................................... ................................................ Wyoming Sodium Montmorillonite (High Swell Type) Geotextile ...................................................... ................................................. Non-Woven Polypropylene available in 1/2 oz, 3 oz & 6 oz. Weight ........................................................... ................................................. 1 lb. per sq. ft. (4.89 kg/m2) Puncture Resistance ..................................... ASTM E 154-88 ....................... 171 lb. (77.5 kg) Membrane Tensile Strength .......................... ASTM D638 ............................. MD: 3670 psi (31.3 MPa) TD: 3500 psi (29.9 MPa) % Elongation at Break .................................. ASTM D638 ............................ >700% Peel Adhesion Geotextile ............................. ASTM C 836 ........................... 28 lb/in (3 oz.) Resistance to Hydrostatic Head .................... ASTM D 5385 ......................... 100 psi max. Pressure (231 ft. water) Permeability .................................................. ASTM E96-80 .......................... 0.033 Perms (grains/ft2 hr_in HG) Resistance to Microorganisms ...................... ASTM E 154-88-13 ................. Unaffected Non Toxic ...................................................... ................................................. Do Not Ingest Freeze Thaw Cycles ...................................... ................................................. No effect before or after Installation Chemical Resistance ..................................... ................................................. Extremely High. Contact EPRO for specific Information. Life Expectancy ............................................. ................................................. Bentonite & HDPE measurable in the thousands of years. Installation Temperatures .............................. ................................................. -25F to 150F (-31.7C to 54.4C)

EPRO SERVICES, INC.

A World of Difference
TM

Phone: 800-882-1896
Fax: 316-262-2529 Web: www.eproserv.com

Waterproofing Systems