Ecoflex R
Ecoflex R
Ecoflex R
Water based may be applied to green or uncured concrete and to damp surfaces.
Exceptional bonding wont delaminate from surfaces.
Non-toxic, non-flammable, non-hazardous user and environmentally friendly.
Viscosity makes high-build application repairs with mesh or polyester mat easier.
Rapid setting allows job to be done in one application.
PROPERTIES
UNIT
METHOD
COVERAGE
Approvals
City Of Los Angeles - RR# 25478 (for methane and waterproofing) and NSF 61 Approved
OR
LD
OF DIFFE
RE
N
CE
EA
TI
Wa te r p r oo f i n g Sys tems
ON
FO
EPRO SERVICES
P.O. Box 347
Derby, KS 67037 USA
Packaging
Available in 55 gal. drums and 275 or 330-gallon totes
LW
ND
ORLD CO
Phone: 800-882-1896
316-262-2513
Fax: 316-262-2529
web site: www.eproserv.com
rev.: ef-r_11.01.11
ECOFLEX-R Specifications
1. PRODUCT NAME
4. TECHNICAL DATA
ECOFLEX-R
Contact the local distributor and/or Authorized Applicator for availability and cost.
2. MANUFACTURER
Specification Writer:
Contact EPRO Services before writing specifications on this product. Test information
available upon request.
7. WARRANTY
5. INSTALLATION
3. PRODUCT DESCRIPTION
No maintenance required.
9. TECHNICAL SERVICES AND INFORMATION
Complete technical services and information
are available from EPRO Services.
OR
LD
OF DIFFE
RE
N
CE
FO
EA
Wa te r p r oo f i n g Sys tems
Limitations:
Should be applied to clean and dry surfaces.
Adjacent areas and surfaces should be protected from contact with the product.
Should be stored above 40 F.
A test area should always be done to verify
compatibility of substrate with product.
Solvent-based products should not be applied over this product.
During warm weather application in 20-mil
layers is recommended.
Cleaning:
Clean all tools with kerosene and/or oilbased cleaners.
8. MAINTENANCE
ON
Benefits:
Performs as a vapor and water barrier.
Non-hazardous, non-toxic, and non-flammable (VOC compliant).
Excellent elongation and recovery.
Good tensile strength.
Exceptional bonding.
Not affected by ponded water.
Application:
Should be applied in accordance with specific application specification.
ECOFLEX-R may be applied by roller,
brush or sprayer to 40-mil build. Two 20-mil
coats will allow ECOFLEX-R to cure faster.
Cracks and joints should be filled and spanned with mesh prior to final coat application.
TI
Composition:
ECOFLEX-R is a medium viscosity waterbased, polymer-modified anionic bituminous/asphalt emulsion, which exhibits excellent bonding, elongation and waterproofing
characteristics.
Basic Use:
ECOFLEX-R is designed as a moisture and
vapor barrier membrane for cavity wall construction that may be applied on a variety of
surfaces including concrete, concrete block,
metal and dens glass. ECOFLEX-R is to be
applied by roller or sprayer to form a monolithic air barrier. It may be used as waterproofing adhesive for insulation board and a
basecoat for other water-based coatings.
LW
ND
ORLD CO
Rev. ef-r_01.12.09