ZXCTN 6300 Packet Transport Product

Hardware Introduction
Contents

 ZXCTN 6300 Product Hardware Introduction

 Product Overview
 System Structure
 Board Function
 Performance and index
 Position of ZXCTN 6300 in the Transmission
Network
Access Layer Convergence Layer Core Layer

CTN 6200
NodeB

CTN 6300 CTN 9004

NodeB CTN 6200 MSC

CTN 6100 RNC
CTN 9008
BTS MGW

MSTP Access
Ring SGSN
BSC
NodeB
MSTP Convergence Layer

BTS

 ZXCTN 6300 is the packet transmission-oriented carrier-class multi-service carrier product introduced by ZTE.
 It focuses on bearing and transmission of integrated mobile Backhaul and multi-service network, which can meet
transmission requirements of various Convergence layer services.
ZXCTN 6300 Product Profile
ZXCTN 6300 Brief Introduction
 Dimensions: 482.6mm(W) X 352.8mm(H) X 243.0mm(D) .
 Satisfies the mounting requirements of subrack in the IEC standard cabinet
(19–inch cabinet) or ETS standard cabinet (21–inch cabinet).
 Mounting mode. ： cabinet, with the depth of 300 mm.
 Subrack adopts the crosswise structure,8U height.
 Multi-service bearing ： support FE 、 GE 、 POS STM-1/4 、 Channelized
STM-1/4 、 ATM STM-1 、 IMA/CES/MLPPP E1 、 10GE service interfaces.
 Switch capacity (dual-direction) : 176Gbps.
 Backplane Capacity: 440Gbps.
 Packet transmit rate: 130.95Mpps.
 Equipment power consumption : ≤ 500W.
 Two types power supply:-48V DC and 220V AC.
 Based on all-packet architecture .
 Offers redundant protection for equipment-level critical units, including 1+1
protection for power board, main control board, switching board, clock
board, as well as two groups 1:2 TPS protection of E1 board.
 Earthquake-proof level ： safe under level-9 earthquake .
ZXCTN 6300 Application Scenario
ZXCTN 6300 Application Scenario
 As the Convergence layer device, ZXCTN 6300 is
applicable to various solutions and the
corresponding application scenarios ：
 Access and transport of mobile base station service
 Access and transport of large client private line service
 Access and transport of Next Generation Network
(NGN) service
 Access and transport of Internet Protocol Television
(IPTV) service
 Access and transport of Video On Demand (VOD)/Voice
over IP (VoIP) service
 Access and transport of mass client Internet service
Contents

 ZXCTN 6300 （ V2.0R1 ） Product Hardware

Introduction
 Product Overview
 System Structure
 Board Function
 Performance and index
System Software Structure
ZTE PTN Product Structure
t
en
Control plane gem
a
E1/STM-N an ne
Data plane M la
p
TDM PWE3 Packets E1/STM-N
exchange core

IMA E1/ATM STM-N

ATM PWE3
GE/10GE

FE/GE/10GE
ETH PWE3

Clock/time sync
（ Ethernet clock sync, 1588 time sync ）

 Three planes of data, control, and management are independently designed.

 Packet exchange core, multi-service bearing
 Supporting clock/time sync satisfies clock/time requirements in various types of
application environments.
Board Slots in Subrack

Slot No. Access Capacity Pluggable Board

1# ~2# 8GE RE1PI
3# ~8# 8GE R8EGF 、 R8EGE 、 R4EGC 、 R4CSB 、 R4ASB 、 R16E1
F 、 R16E1B 、 R4GW 、 R4CPS
9# ~12# 10GE R1EXG
13# 、 14# - RSCCU3
15# 、 16# - RPWD3 、 RPWA3
17# - RFAN3

Functional boards plugged into specific slots;

while service boards into flexible slots.
ZXCTN 6300 Board Naming List
Board ID Meaning of Board ID
RSCCU3 Switch Control Clock Unit for 6300
R1EXG 1 port Enhanced 10 Gigabit ethernet Fiber interface
R8EGF 8 ports Enhanced Gigabit ethernet Fiber interface
R8EGE 8 ports Enhanced Gigabit ethernet ELE interface
R4EGC 4 ports Enhanced Gigabit ethernet Combo interface
R4CSB 4 ports Channelized STM-1 Board
R4ASB 4 ports ATM STM-1 Board
R4GW Gateway Board
R4CPS 4–Port Channelized STM-1 PoS Board
R16E1B 16 ports E1 board with back interface
R16E1F 16 ports E1 board with Front interface
RE1PI E1 Board for Interface protection
RPWD3 Power DC board for 6300
RPWA3 Power AC board for 6300
RFAN3 Fan board for 6300
Relationship Between Boards and Slots
Board Type Board Occupied Slot Number Slot NO.
Main control
RSCCU3 1 Slot13 、 Slot14
board
R1EXG 1 Slot9 ~Slot12
R8EGF 1 Slot3 ~Slot8
R8EGE 1 Slot3 ~Slot8
R4EGC 1 Slot3 ~Slot8
R4CSB 1 Slot3 ~Slot8
Interface board
R4ASB 1 Slot3 ~Slot8
(sub-board)
R4GW 1 Slot3 ~Slot8
R4CPS 1 Slot3 ~Slot8
R16E1B 1 Slot3 ~Slot8
R16E1F 1 Slot3 ~Slot8
RE1PI 1 Slot1 ~Slot2
Power supply RPWD3 1 Slot15 、 Slot16
board RPWA3 1 Slot15 、 Slot16
Fan board RFAN3 1 Slot17
Contents

 ZXCTN 6300 （ V2.0R1 ） Product Hardware

Introduction
 Product Overview
 System Structure
 Board Function
 Performance and index
Board Function

 Main control switching clock Board

 RSCCU3
 Service Board
 Power Board
 Fan Board
Switch Control Clock Unit RSCCU3
 Board Functions
 RSCCU3 is the core board of ZXCTN 6300,composed
of functional boards: master control unit, switch unit,
clock synchronization unit and so on, they are
cooperated to realize the following system functions:

Control

Routing

Network management protocol
 RSCCU3 adopts 1+1 backup working mode.
Switch Control Clock Unit RSCCU3
 Front Panel

1. Captive screw
2. Run indicator (RUN)
3. Alarm indicator (ALM)
4. Board active/standby indicator (MST) 12. Local maintenance terminal interface (LCT)
5. CLK Clock running indicator (CLK) 13. Network management interface (Qx)
6. BITS interface (Tx) 14. Device running indicator interface (LAMP)
7. BITS interface (Rx) 15. Device debugging interface (CON)
8. Time interface (GPS_IN) 16. Board enforced-handover button (EXCH)
9. Time interface (GPS_OUT) 17. Board reset button (RST)
10. Alarm input interface (ALM_IN) 18. Ring-trip button (B_RST)
11. Alarm input interface (ALM_OUT) 19. Extractor
Switch Control Clock Unit RSCCU3
 Interface
Interface Description
BITS （ Tx 、 R BITS clock signal sending & receiving interface, adopting un-balanced CC4interface. It supports one
x） channel BITS external clock output & input (75Ω).

GPS_IN External time input & output interface, the interface type is RJ45. It supports to input & output
GPS_OUT phase synchronization information and absolute time value. It is used to receive & send external
time and synchronize the local and external clock.
ALM_IN Alarm input interface, the interface type is RJ45. It supports four channel external alarm inputs.
It is used to receive alarm from other devices.
ALM_OUT Alarm output interface, the interface type is RJ45. It supports three alarm output channels. It is
used to send alarm to other devices.
LCT Local maintenance terminal interface, the interface type is RJ45. It is used to Ethernet Telnet login
and management.
Qx Network management interface, the interface type is RJ45. It is used to connect ZTE network
management system.

LAMP Device running indicator interface, the interface type is RJ45. It is used to connect the alarm
indicators of cabinet and heads cabinet.
CON Device debugging interface, the interface type is RJ45. It is used to configure and maintain the
system.
Port Protection on RSCCU3 Board
 When two pieces of RSCCU3 board are configuration ， all the ports on
the up and down boards are protecting to each other one-to-one ：
Board Function

 Main control switching clock Board

 Service Board
 R4ASB R4EGC
 R8EGE R8EGF
 R1EXG R4CSB
 R4GW R4CPS
 R16E1F R16E1B
 RE1PI
 Power Board
 Fan Board
Enhanced Gigabit Combo Board R4EGC
7 8
 Front Panel 5 6

2
3 4 9 10

1. Captive screw
2. GE Ethernet electrical interface
3. Board running indicator
4. Board alarm indicator
 Interface
5. GE Ethernet electrical interface ACT indicator ：
yellow Interface Description
6. GE Ethernet electrical interface LINK indicator ： green GE （ electrical ） 4 gigabit Ethernet electrical interfaces,
7. GE Ethernet optical interface ACT indicator ： green
8. GE Ethernet optical interface LINK indicator ： green Using RJ45 socket
9. GE Ethernet optical interface GE （ optical ） 4 gigabit Ethernet optical interfaces,
10. Carrying handle Using pluggable SFP optical module
11. Laser warning mark
Enhanced Gigabit Electrical Interface Board R8EGE
 Front Panel 5 6

2
3
4 7

1. Captive screw  Interface

2. Board running indicator
3. Board alarm indicator
4. GE Ethernet electrical interface: Interface Description
5. GE Ethernet electrical interface ACT indicator: yellow
GE （ electrical l 8 GE Ethernet electrical interfaces,
6. GE Ethernet electrical interface LINK indicator: green
） adopting RJ45 socket
7. Extractor
Enhanced Gigabit Optical Interface Board R8EGF
 Front Panel

1. Captive screw
2. Board running indicator
 Interface
3. Board alarm indicator
4. GE Ethernet optical interface
5. GE Ethernet optical interface ACT indicator : green Interface Description
6. GE Ethernet optical interface LINK indicator :green GE （ optical 8 gigabit Ethernet optical interfaces,
7. Extractor ） Using pluggable SFP optical module
8. Laser warning mark
 Channelized STM-1/STM-4 Board R4CSB
 Front Panel
4 5

2 3 6 7

1. Captive screw
2. Board running indicator
3. Board alarm indicator
4. Optical interface sending indicator Tn n=1~4, green
5. Optical interface receiving indicator Rn n=1~4, green
6. Four STM-1 optical interfaces, with the first one configured as STM-4 optical interface and adopting plug-pull SFP optical module
7. Extractor
8. Laser warning mark
9. Laser class mark
4-Port Channelized PoS Board R4CPS
 Front Panel

1. Captive screw
2. Board running/protection status indicator (RUN/MS)
3. Board alarm indicator (ALM)
4. Optical interface sending indicator Tn n=1~4, green
5. Optical interface receiving indicator Rn n=1~4, green
6. STM-1/STM-4 optical interface: 4–port Channelized PoS STM-1,only he first port can be set as STM-4
7. Carrying handle
8. Laser warning mark
9. Laser class mark
Front Outgoing Line E1 Board R16E1F
 Front Panel

2 3 4
5 6

 Board Indicator Status

1. Fixed Screw
2. Board Run Indicator RUN Indicator Status
Board Working Status
3. Board Alarm Indicator ALM RUN (Green ） ALM (Red)
4. E1 Electrical Interface (1 ~8)
5. Lever Flashes (0.5
Board runs properly without alarm Off
6. E1 Electrical Interface (9 ~16) time/second)
Flashes (0.5
Board runs properly with alarm On
time/second)
E1 Interface Board RE1PI
 Front Panel

 Board Indicator Status

Indicator Status
Board Working Status
RUN (Green ） MS (Yellow)
1. Captive screw Board runs properly Flashing
2. Board running indicator (RUN) -
(non-protection status) (0.5 time/second) (green)
3. Board protecting indicator (MS)
4. E1 electrical interface (1-32) Board runs properly Flashing
5. Extractor -
(protection status) (0.5 time/second) (yellow)
E1/T1 Service Sub-card TPS Protection
 Two Groups of 1:2 Tributary Protection
 P1 protect W1 、 W2
 P2 protect W3 、 W4
 The first 16 E1 interface of Slot 1 board to Slot 6 board ；
 The last 16 E1 interface of Slot 1 board to Slot 8 board ；
 The first 16E1 interface of Slot 2 board to Slot 5 board ；
 The last 16 E1 interface of Slot 2 board to Slot 7 board ；

P1 P2
W W
1 3
W W
2 4
Board Function

 Main control switching clock Board

 Service Board
 Power Board
 RPWD3
 RPWA3
 Fan Board
DC Power Supply Board RPWD3
 Front Panel

1 2  Board Indicator Status

Indicator Status
Board Working Status
RUN (Green ）

1.–48V RTN terminal : Board runs properly ON

used to connect –48 V power supply grounding cable.

2.–48V terminal : Board runs improperly OFF

used to connect –48 V power supply cable.
AC Power Supply Board RPWA3
 Front Panel

100–240 V power supply socket

 Board Indicator Status
Indicator Status
Board Working Status
RUN (Green ）

Board runs properly ON

Board runs improperly OFF
Board Function

 Main control switching clock Board

 Service Board
 Power Board
 Fan Board
 RFAN3
Fan Board RFAN3
 Front Panel
1. Board running indicator
2. Board alarm indicator
3. Locket button
4. Safety warning mark
5. Carrying handle

 Board Indicator Status

Indicator Status
Board Working Status
RUN (Green ） ALM (Red)

Board runs properly ON OFF

Board runs improperly OFF ON

Course Outline

 ZXCTN 6300 （ V2.0R1 ） Product Hardware

Introduction
 Product Overview
 System Structure
 Board Function
 Performance and index
ZXCTN 6300 Product Performance list
 Power Indicators
 Service Performance
 Reliability Indicators
 Ethernet Performances
 Clock Time Performances
 Protection Switching Performance
 Interface Performances
Power Indicators
 Power Supply Requirements

Power Module Code Input Voltage (V) Voltage Range (V)

RPWD3 -48 DC -59.5~-40.0
RPWA3 110/200 AC 90.0 ~290.0

 Power Consumption Indexes

 The overall power consumptions are different according to different configurations
and the maximum power consumption is less than 500 W.
 The power consumption of ZXCTN 6300 with typical configuration is listed below:

Name Quantity Name Quantity

Subrack (with Backplane) 1SET R4CSB 1Piece
RSCCU3 2Piece R4ASB 1Piece
R1EXG 2Piece R16E1 （ 75 ） 2Piece
R8EGF 2Piece RFAN3 1Piece
R8EGE 2Piece RPWD3 2Piece
Actual Total Power Consumption 424W
Ethernet Performances
 Quantity of VLAN ID
 All Ethernet interfaces of ZXCTN 6300 can identify C-VLAN ID 1-
4094 according to IEEE 802.1Q ， and VLAN ID 1-4094 can be
configured on all Ethernet interfaces.
 Quality of Ethernet EVC Services

Service Type Performance Indicator (Piece)

E-LINE 1K
E-LAN+E-TREE 64
Protection Switching Performance
 Ring network protection switching time is tested to one ring network
composed of 16 ZXCTN 6300 nodes without protection hold-off.
Protection Type Performance Indicator
1+1 path protection Less than 50ms
1:1 path protection Less than 50ms
1+1 SNC protection Less than 50ms
1:1 SNC protection Less than 50ms
ZESS protection Less than 30ms
MPLS-TP Wrapping ring network protection Less than 50ms
PW dual-home protection Less than 50ms

 Protection switching hold-off time and wait to restore time (WTR)

Type Period Step
Protection Hold-off Time 0-10 s 100 ms
Wait to Restore Time (WTR) 1-12 min 1 min