Scribd Logo
Upload

Welcome to Scribd!

  • 65 views

    HTGD - GYFY - Dielectric Armored Cable

    Uploaded by

    Guillermo Romero Uriarte
    Data Sheet

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    HTGD - GYFY - Dielectric Armored Cable

    Uploaded by

    Guillermo Romero Uriarte
    65 views2 pages
    Data Sheet

    Original Title

    HTGD - GYFY – Dielectric armored cable

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Data Sheet

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    65 views2 pages

    HTGD - GYFY - Dielectric Armored Cable

    Uploaded by

    Guillermo Romero Uriarte
    Data Sheet

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    GYFY – Dielectric armored cable

    1. Cable cross-section

    2. Cable Specification
    2.1 Introduction
    Loose tube construction, tubes jelly filled, elements (tubes and filler rods) and water blocking yarns laid up around
    non-metallic central strength member, polyester yarns used to bind the cable core, water blocking tape, dry core,
    then glass yarns and PE outer sheath .
    2.2 Fiber color code
    Fiber color in each tube starts from No. 1 Blue.

    1 2 3 4 5 6 7 8 9 10 11 12
    Blue Orange Green Brown Gray White Red Black Yellow Purple Pink Aqua

    2.3 Color codes for loose tube


    Tube color starts from No. 1 Blue.

    1 2 3 4
    Blue Orange Green Brown

    2.4 Cable structure and parameter


    Item Unit Value
    No. of fibers count 24 48
    No. of fibers per tube count 12 12
    No. of elements count 6 6
    Cable diameter(±5%) mm 11.2 11.2
    Cable weight(±10%) mm 92 96
    Short term tension N 2000 2000
    Short term crush N/100mm 1000 1000

    Document Type Spec. No. Approved by Prepared by Date Rev Page


    Tech. Wud Pengxp 2018-10-22 0.0 1/2
    32018101511
    Specification Luyx Limh 2019-07-05 2.0 1/2
    3. Characteristic of Optical Cable
    3.1 Min. bending radius for installation
    Static: 10x cable diameter
    Dynamic: 20x cable diameter
    3.2 Application temperature range
    Operation: - 20℃ ~ +60℃
    Installation: -10℃ ~ +60℃
    Storage/transportation: - 20℃ ~ +60℃
    3.3 Main mechanical & environmental performance test

    Item Test Method Acceptance Condition

    - Load: Short term tension


    Tensile Strength - Fiber strain  0.6%
    - Length of cable: about 50m
    IEC 60794-1-2-E1 - No fiber break and no sheath damage.
    - Load time: 1min
    Crush Test - Load: Short term crush - Loss change  0.1dB@1550nm
    IEC 60794-1-2-E3 - Load time: 1min - No fiber break and no sheath damage.

    4. Characteristic of Optical Fiber


    G652D fiber information
    Mode field diameter (1310nm): 9.2m0.4m
    Mode field diameter (1550nm): 10.4m0.8m
    Cut off wavelength of cabled fiber (cc): 1260nm
    Attenuation at 1310nm: 0.36dB/km
    Attenuation at 1550nm: 0.22dB/km
    Bending loss at 1550nm (100 turns, 30mm radius): 0.05dB
    Zero dispersion wavelength: 1300nm-1324nm
    Dispersion in the range 1288 to 1339nm: 3.5ps/ (nm•km)
    Dispersion in the range 1271 to 1360nm: 5.3ps/ (nm•km)
    Dispersion in the range 1480 to 1580nm: 20ps/ (nm•km)
    Dispersion at 1550nm: 18ps/ (nm•km)
    Dispersion at 1625nm: 22ps/ (nm•km)
    Dispersion slope at zero dispersion wavelength: 0.092ps/ (nm2•km)

    Document Type Spec. No. Approved by Prepared by Date Rev Page


    Tech. Wud Pengxp 2018-10-22 0.0 2/2
    32018101511
    Specification Luyx Limh 2019-07-05 2.0 2/2

    You might also like