B1 Technician

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

COVER LETTER

TO HUMAN RESOURCES MANAGEMENT

DEAR MR/MRS HR DEPARTMENT I AM WRITING TO EXPRESS MY INTREST IN TECHNICIAN WITH YOUR ENGINEERING DEPARTMENT I LEARNED ABOUT YOUR COMPANY
THROUGH CAREER SITE (WEBSITE) I HAVE IMMERSED MYSELF IN PROVIDING INDUSTRY LEADING AIRCRAFT MAINTENANCE AND ENGINEERIN G SOLUTION . I HAVE TOTAL 4.5+
YEARS AVIATION MAINTENANCE EXPERIENCE BOTH LINE AND BASE DEPARTMENT I HAVE GAINING FOLLOWING AIRCRAFT MAINTENACE EXPERIENCE AIRBUS 320 FITTED WITH
CFM 5B/IAE V2500 BOEING 737-600/700/800/900/900ER FITTED WITH CFM 56 - 7 B ATR 42/72 FITTED WITH PW 127 BOMBARDIER Q-400 FITTED WITH PW 150 .
DEAR SIR ,THE SUCCESS AND GROWING IS MY PRIORITY AND MY GOAL ,SKILL AND MY KNOWLEDGE CONSTANTLY INCREASED , I HARDWORKING AND HONEST PEOPLE I GIVE
YOU 100% BEST

THANKS &REGARDS
AWADH KUMAR
MADHURA NAGAR, SHAMSHABAD

MOBILE: +919076581012 HYDERABAD-501218


E-mail: [email protected]
Permanent add
village and post rudhauli bhavbhavch
Dist maharajganj Uttar Pradesh 273303 india

Subjective:-
• Application for Aircraft Technician Mechanical B1.

ACADEMIC QUALIFICATION-

• PASSED HIGH SCHOOL FROM UP BOARD IN 2013 WITH 85%


• PASSED INTERMEDIATE FROM UP BOARD IN 2015 WITH 85%
TECHNICAL QUALIFICATION-

• (Diploma )AIRCRAFT MAINTENANCE ENGINEERING from IAME


Gorakhpur, (U.P) APPROVED BY DGCA 2015 to 2018

TECHNICAL EXPERIENCE

• Working as Aircraft Maintenance Technician in GMR AEROTECHNIC


HYDERABAD (BASE MAINTENANCE DEPARTMENT)on Airbus A320
and BOEING 737aircraft from 17th DECEMBER 2018 to Till date.

• A check , C Check , of Airbus 320and Boeing 737Aircraft.


• Cabin reconfiguration of A320/B737.
• CFM56-5B Engine Removal and installation on Airbus 320.
• CFM56-7B Engine Removal and installation on Boeing 737.
• Fan blade removal and Installation on CFM 56 and V2500 for lubrication.
• Main landing gear removal and Installation on Airbus 320and Boeing 737
Aircraft.
• on.
• Lubrication of f MLG /NLG and Door on A320and B737.
• Primary and main heat exchanger removal and Installation for shop
cleaning on Airbus 320 .
• LAV fire Extinguisher removal and installation.
• Passenger seat/ CA seat P1P2 seat removal and installation on A320.
• LAV A/E/D ,G1/G5 Removal and installation on A320 Aircraft.
• Cabin floor board / Carpet / dado panel /Ceiling panel/Diffuser panel/side
wall/insulation blanket/door trim/ slide raft /escape slide etc removal and
installation.
• Air-conditioning distribution duct replacement.
• Passenger/Crew Entry Door Seal replacement on A320 Aircraft.
• All 4Door scuff plate removal and installation on A320 Aircraft.
• Pylon panel /Access panel/Leading Edge panel/Trailing Edge panel/Fuel
tank panel/Removal and installation on A320and BOEING 737Aircrat.

• On job trainee on AR AIRWAYS PVT LTD DELHI FROM 01/03/2018 T0


01/12/2018 on Both Base and Line Maintenance.

TYPES OF AIRCRAFT
• AIRBUS 320 FITTED WITH CFM 56-5B/V2500
• BOEING 737-600/700/800/900/900ER FITTED WITH CFM 56-7B
• ATR 42/72 FITTED WITH PW 127M
• BOMBARDIER Q-400 FITTED WITH PW150
• BOMBARDIER CRJ100/200 FITTED WITH GE CF34-3A1/3B1
• FALCON -2000 FITTED WITH CFE738-1-1B
• CESSNA CITATION 550 CII FITTED WITH JT15D-4
• CESSNA CITATION 560 XL FITTED WITH P&W 545A

DGCA MODULE PASSED –


• MODULE 3(ELECTRICAL FUNDAMENTAL
• MODULE 4 (ELECTRONIC FUNDAMENTAL)
• M0DULE 6 (MATERIAL & HARDWARE)
• MODULE 7 (MAINTENANCE PRATICE )
• MODULE 8 (BASIC AERODYNAMICS)
• M0DULE 9 (HUMAN FACTORS)
• M0DULE 10 (AVIATION LEGISLATION)
• MODULE 17 (PROPPROPROPELLER
• MODULE 11(HA)

✓ Proficiency in Line, Base and Cabin Maintenance work (Pre-flight inspection, Transit inspection
& scheduled maintenance)-

• Assisted in carried out various level of C and A check in cabin maintenance ,


removal and installation of seats,galley ,lavatories,sidewall panel,overhead
bins,carpet,floor board,seats cover etc
• Assisted in carried out checking and replacement of all emergency equipment life
vests,seat belt,slide rafts ,fire extinguishers.
• Assisted in Transit inspection, layover inspection, weekly inspection
Hydraulic fluid servicing, Engine oil servicing, and wheel change.
• Assisted in C Check, Major maintenance, heavy check, landing gear
assembly Removal/ installation, Engine removal/ installation etc

KEY SKILLS -
• High performance and results being consistently achieved.
• The energy, enthusiasm and determination to succeed.
• Unstinting co-operation in overcoming problems.
• Willingness to accept responsibility.
• Willingness to accommodate change.

PERSONAL DETAIL-

• Name: AWADH KUMAR


• Father name:MR. VISHWANATH
• Date of birth: 01/11/1997
• Gender: MALE
• Passport No.R5729194
• Permanent Address: Rudhauli bhavchak dist Maharajganjganj Uttar Pradesh- 273303
INDIA

DECLARATION-
I hereby declare that all the information given above is true to best of my knowledge.

PLACE: RGI AIRPORT HYDERABAD

You might also like