Scribd Logo
Upload

Welcome to Scribd!

  • 49 views

    TDS Super Bond - SB

    Uploaded by

    Dharmendra Pal
    Super Bond - SB is a solvent-based, high strength construction adhesive with a synthetic rubber base. It has a wide range of applications, good initial grab, and adhesion on uneven surfaces. The adhesive dries through physical processes within 20 minutes initially and fully cures within 24-48 hours. It can bond materials like wall panels, tiles, and insulation boards to both porous and non-porous surfaces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    TDS Super Bond - SB

    Uploaded by

    Dharmendra Pal
    49 views1 page
    Super Bond - SB is a solvent-based, high strength construction adhesive with a synthetic rubber base. It has a wide range of applications, good initial grab, and adhesion on uneven surfaces. The adhesive dries through physical processes within 20 minutes initially and fully cures within 24-48 hours. It can bond materials like wall panels, tiles, and insulation boards to both porous and non-porous surfaces.

    Original Title

    TDS SUPER BOND - SB

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Super Bond - SB is a solvent-based, high strength construction adhesive with a synthetic rubber base. It has a wide range of applications, good initial grab, and adhesion on uneven surfaces. The adhesive dries through physical processes within 20 minutes initially and fully cures within 24-48 hours. It can bond materials like wall panels, tiles, and insulation boards to both porous and non-porous surfaces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    49 views1 page

    TDS Super Bond - SB

    Uploaded by

    Dharmendra Pal
    Super Bond - SB is a solvent-based, high strength construction adhesive with a synthetic rubber base. It has a wide range of applications, good initial grab, and adhesion on uneven surfaces. The adhesive dries through physical processes within 20 minutes initially and fully cures within 24-48 hours. It can bond materials like wall panels, tiles, and insulation boards to both porous and non-porous surfaces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Technical Data Sheet

    SUPER BOND - SB
    Revision: 01/01/2016 Page 1 of 1

    Technical Data:

    Base Synthetic rubber (SBR)


    Consistency Paste
    Curing System Physical drying and crystallisation
    Specific Gravity (DIN 53479) 1.23 g/ml
    Open Time* 15 min.
    Curing Time* 20 min. (initial strength), 24-48 h
    Temperature resistance -20°C to +60°C (cured)
    * This varies according to ambient conditions such as temperature, humidity, substrate etc.

    Product: Applying the adhesive:


    Super Bond - SB is a solvented instant grab, high Method: Extrude, by means of a caulking gun, a
    strength construction adhesive based upon bead onto one surface in strips or dabs. Always
    synthetic rubbers. apply adhesive to the edge of panels. Press the
    surfaces together immediately. Batten down with a
    Characteristics: hammer. Support may be required on a vertical
    - Wide range of applications fixing or for heavy components.
    - Adhesion on uneven surfaces possible For the bonding of wall panels and other heavy
    - Replaces nails and screws materials use the transfer method: press
    - Good initial grab components together and release for max. 10 min.
    - Doesn’t attack polystyrene Return parts together and batten down with a
    rubber hammer. If necessary support until adhesive
    Applications: is completely cured (approx. 24-48 hours).
    For the bonding of e.g. plinths, wall panels, skirting Application temperature: +5°C to +35°C
    boards, coving, plasterboard, polystyrene isolation-, Clean: with white spirit, acetone
    and decoration panels, ceramic tiles, decorative Repair: with Super Bond - SB
    elements made from many different substrates etc.
    onto porous and non porous surfaces. Due to its Shelf life and storage:
    gap-filling characteristics it can be used on uneven 12 months from date of manufacturing in unopened
    surfaces packaging stored in a cool and dry place at
    recommended temperatures between +5°C and
    Packaging: +25°.
    Colour: creme
    Packaging: cartridge 390g Remarks:
    When bonding, the pressure applied determines
    Surfaces: the final bonding strength. The duration during
    Type: all surfaces, except PS, PP and PE which pressure is applied is less important.
    State of Surface: clean, dry, free of dust and grease
    Health- and safety recommendation:
    We recommend a preliminary compatibility test. Apply the usual industrial hygiene. Work in a well-
    ventilated place. Do not smoke. If the area is not
    sufficiently ventilated, wear breathing equipment.
    Consult the label for more information.
    Remark: The directives contained in this documentation are the result of our experiments and of our experience and have been submitted
    in good faith. Because of the diversity of the materials and substrates and the great number of possible applications which are out of our
    control, we cannot accept any responsibility for the results obtained. In every case it is recommended to carry out preliminary
    experiments.

    McCoy Soudal Sealants Adhesives & Foams Pvt. Ltd.


    McCoy Corporate Tower, C–55, Okhla Industrial Area, Phase–1, New Delhi - 110020 (INDIA)
    Tel.:+91 11 40623344 (100 lines) | Fax: +91 11 40623355
    Website: www.mccoysoudal.com | Email: [email protected]
    1800-121-6569 (Toll Free)

    You might also like