Outdoor Unit Indoor Unit: Excellent Ecodan's Heating Performance, Even at Low Outdoor Temperature!

Download as pdf or txt
Download as pdf or txt
You are on page 1of 19

“ecodan” can heat rooms and supply domestic

hot water, realising greater comfort and energy saving.


“ecodan” – Economic, eco conscious next generation heating system
Both energy-saving and safe for the environment, the Mitsubishi Electric ecodan incorporates a highly efficient heat pump
system that captures “the heat in the air”, a renewable energy resource. Equipped with advanced inverter control, meticulous
temperature control assures comfortable heating, and its space-saving “All-in-one” indoor unit is easy to install. These energy-
saving, high comfort and simple installation characteristics have drawn the ecodan heating system into the spotlight centre
stage.

Excellent ecodan’s heating performance, even at low outdoor temperature!

INDOOR UNIT OUTDOOR UNIT


Hydro box, cylinder unit Packaged type
Small capacity Medium capacity Large capacity
(Under 5kW )* (7.5kW –14kW )* (>
= 16kW)*

PUHZ-HW112/140

Coming soon

PUHZ-W50 PUHZ-W85/112 PUHZ-W85 PUHZ-W112

Small capacity Medium capacity Large capacity


Split type (Under 5kW )* (7.5kW –14kW )* (>
= 16kW)*

PUHZ-SHW80/112AA PUHZ-SHW80/112/140 PUHZ-SHW230

Reversible hydro box,


Reversible cylinder unit

PUHZ-SW50 PUHZ-SW75 PUHZ-SW75/100AA PUHZ-SW100/120 PUHZ-SW160/200

Eco
Inverter
SUHZ-SW45

ATA/ATW Small capacity Medium capacity Large capacity


Hybrid system (Under 5kW )* (7.5kW –14kW )* (>
=16kW)*

PUHZ-FRP71

PUMY
+ ecodan

PUMY-P112/125/140

* Rated capacity is at conditions A2W35. (according to EN14511)

124
New eco-design directive
What is the ErP Directive?
The Ecodesign Directive for Energy-related Products (ErP Directive) established a framework to set mandatory standards for ErPs sold in the Euro-
pean Union (EU). The ErP Directive introduces new energy efficiency ratings across various product categories. It affects how products such as
computers, vacuum cleaners, boilers and even windows are classified in terms of environmental performance. Labelling regulations that apply to
our ATW heat pumps came into effect from September 26, 2015.

New energy label and measurements


Under directive 2009/125/EC, ATW heat pumps of up to 70kW are required to show their heating efficiency on the energy label. The purpose of
the energy label is to inform customers about the energy efficiency of a heating unit. The efficiency for space heating is ranked from A++ to G. In
the case of domestic hot water, it is from A to G.
A package label is also required if the ecodan heat pump is installed with a controller and/or a solar system or additional heater. All ecodan units*
are already rated as A++ for heating at both 55°C and 35°C and A for domestic hot water, which are the highest efficiency ranks.
*Except for our ATA/ATW hybrid system Mr. SLIM+

Product label
This label is for individual heating units, such as an ecodan heat pump. Typically, the space heater label is used for ecodan systems
with a hydro box, and the combination heater label is used for ecodan systems with a cylinder unit.

Heat pump space heater label Combination heater label


Manufacturer

Outdoor and indoor unit


model name Symbol for
domestic hot water
Symbol for space heating
DHW efficiency during
medium-temperature
Heating efficiency in operation
low-flow temperature operation

Heating efficiency in
medium-flow temperature operation

Indoor and outdoor unit


operating sound power level values

Rated heat output (kW)


under average,
colder and warmer conditions

European temperature
climate map

These labels are delivered with all ecodan outdoor units.

What is the package label?


A heating system can use several energy-related products, such as a controller or solar thermal system. Therefore, a label showing the efficiency
of the total heating system is required. The category range is defined from A+++ to G.
Creating the package label is the responsibility of the installers and distributors. A useful tool on the Mitsubishi Electric website is available to
easily create the labels for ecodan products and controllers.
erp.mitsubishielectric.eu/erp/options

Package label
This label is for heating systems that use several energy-related products, such as a controller or a solar thermal system.

Package space heater label Package combination heater label

Sample Sample-1 Sample Sample-2

A ++
A +++
A ++ A+++ A +++ A L
A+++
A++
A+
A ++ with solar thermal system A
B

A+ C

+
D

+ X A
X E
F

B
with hot-water storage tank G

+ X C
+ X L
A+++ A +++
D
with temperature controller +
A++

+ X E
X A+
A
B
C
F
+
D

+ X G with auxiliary heating units


X E
F
G

2015 811/2013 2015 811/2013

Customised package labels including ecodan heat pumps and the FTC5 controller
can be created on the Mitsubishi Electric website.

125
Designed for Optimal Heating
ZUBADAN New Generation (Split type)
Even at the very low ambient temperatures, our ZUBADAN
can provide powerful heating.
● Our unique flash injection circuit enables the nominal capacity to be maintained down to -15°C.
● The guaranteed operating range of the heating mode is extended down to -28°C.

Improved Heating Performance


Mitsubishi Electric’s unique “Flash Injection” circuit achieves remarkably high heating performance. This technology has resulted in an excellent
heating capacity rating in outdoor temperatures as low as -15°C, and the guaranteed heating operation range of the heating mode has been extended
to -28°C. Accordingly, the heat-pump units of the ZUBADAN Series are perfect for warming homes in the coldest regions.

12 Guaranteed heating operation range is


ZUBADAN 4HP extended to -28°C ambient temperature
10
ZUBADAN 3HP
capacity (kW)

8
Heating

-20oC Power INV 3-4HP


6

4 -28oC ZUBADAN 3-4HP

-28oC -25oC -20oC -15oC -7oC 0oC -28oC -25oC -20oC -15oC -10oC -5oC 0oC
Outdoor-air temperature

Mitsubishi Electric’s Flash Injection Technology The Key to High Heating


Performance at Low Outdoor Temperatures
■ Flash Injection Circuit
ZUBADAN (SHW) Injection compressor
(injection port)

Indoor Outdoor
HEX Receiver HEX
B
LEV B LEV A

LEV C
A Heat
interchanger
Refrigerant (HIC)
flow Flash Injection Circuit

A Heat Interchanger ( HIC ) B Injection Compressor

HIC cross-sectional view Injection on


Discharge port
Refrigerant which has passed through LEV C
(refrigerant pressure lowered)
Refrigerant which hasn’t passed through LEV C Suction Injection
port port
Injection off

Purpose: Transform liquid refrigerant into


liquid-gas state
Effect: Injection circuit increases energy
efficiency
Purpose: To increase the volume of refrigerant being circulated
Effect: Improves heating capacity at low outdoor temperatures,
The compressor is subjected to a heavy load when compressing
and enables higher outlet temperature adjustment and
liquid refrigerant, and the result is lower operation efficiency. higher defrost operation speed
The addition of HIC supports refrigerant heat exchange at two
different pressure levels. The heat-exchange process transforms Refrigerant passes from the HIC into the compressor through
the injected liquid refrigerant into a gas liquid state, thereby de- the injection port. Having two refrigerant inlets makes it possible
creasing the load on the compressor during the compression to raise the volume of refrigerant being circulated when the out-
process. door temperature is low and at the start of heating operation.

126
Dedicated Heat Pump for Residence NEW
PUHZ-SW75V/YAA SW100V/YAA SHW80V/YAA SHW112V/YAA

Stylish and compact


The stylish design and compact size
harmonises residential application 1,020mm

● Simple and elegant design by rounding left and right corners of the unit.
● Concealing the fan by matching the panel and the grille in dark colour.
● Unified shape and safety by setting the fan whole backwards and matching
the grille on the same level of the front panel.

480mm

High performance 1,050mm

New compressor
● Compact
● High performance

* for PUHZ-SW100V/YAA
PUHZ-SHW80V/YAA
PUHZ-SHW112V/YAA

ErP Lot 1 Compliant with highest seosonal space heating


energy efficiency class A++
Powerful heating yet annaully high energy efficiency, achieving rank A++.

SCOP SCOP SCOP SCOP


A++ A++ A++ A++
3.31 3.32 3.39 3.46
A++ SCOP 3.1

Heating PUHZ-SW75VAA PUHZ-SW100VAA PUHZ-SHW80VAA PUHZ-SHW112VAA

Higher reliability
New base design
Improving drainage
● Optimising the base structure to improve drainage.
● A slope of the base achieves smooth and faster drainage.

sectional view

Cut line

Optimizing defrost control and operation.


Optimizing outdoor unit heat exchanger to avoid ice-forming.

127
Compact but low noise
Noise reduction-10dB(A)
10dB(A) less in PWL comparing with the current 90
models (of 3-4HP).
80

Octave band level [dB] (0dB=20μPa)


70

60

50

40
Ambulance
Siren Current model
30

20 New model
120dB Circular *Current
New model is SW75V AA.
model is SW75VHA.
Saw 10
63 125 250 500 750 2000 4000 8000
Octave band[Hz]
100dB Vacuum
Cleaner

Normal
80dB Conversation

Library interior
60dB
40dB Whisper
20dB
Blowing Air
To reduce fan noise
● Optimising fan position
● Optimising bell mouth shape
● Bigger fan diameter

Enclosing noise Avoiding vibration and resonance


Shutting out noise from compressor ● Dedicated soft rubber mount for the compressor to avoid vibration.
● Optimising piping structure to avoid vibration and resonance.
● The structure of double enclosing
Primary: enclosing a compressor (the structure is patented.)
Secondary: enclosing machine room.

128
Indoor units
New all-in-one compact indoor unit
Easy to install and low maintenance Hydro box (Split type) Cylinder unit (Split type)
Expansion vessel*
Expansion vessel*
• All-in-one: Key functional components are
Manometer
incorporated 800mm 1600mm
• Compact cylinder unit: Just 1600mm in height
Booster heater*
• Compact hydro box: Only 530×360mm footprint Water pump
Tank
• Easy installation: Factory fitted pressure relief Plate heat Booster heater* 3-way valve
valve exchanger

• Easy service: Relevant parts are located at the Strainer


Manometer
front of the unit for easy maintenance Domestic
hot water pump
• Easy transport: Handles attached on front and 360mm Strainer
back (cylinder unit) 530mm
Water pump Scale trap

Plate heat Domestic


exchanger hot water plate
heat exchanger

Adjustable feet
680mm
Larger capacity system 595mm
*Depending on model
Outdoor units
PUHZ-SW160/200YKA
SHW230YKA2
Indoor units
EHSE-YM9EC, EHSE-MEC, ERSE-YM9EC, ERSE-MEC

Our 8–10HP ecodan heat pumps, only available with a hydro box connection,
are suitable for large houses and small businesses where a high heating load
is necessary. Our latest generation of 8–10HP Power Inverter outdoor units
can reach 60°C maximum flow temperature. The new 8–10HP hydro box is
available in both heating only and reversible models and can be connected to
a customised capacity domestic hot water tank.

Line-up Reversible models (for heating/cooling)


ecodan’s line-up has many types of indoor units to satisfy diverse cus- Perfect comfort in winter and summer
tomers’ needs, requests and local regulations.
It includes smaller capacity units, with/without booster heater, with/
time, thanks to our reversible models.
without an expansion vessel, etc. Reversible models are now available for both hydro box and cylinder
In addition, a reversible hydro box and a reversible cylinder unit are units (Split type only).
available. The new reversible cylinder is now able to produce cold water for
cooling use and can alternatively produce domestic hot water in
Hydro box Cylinder unit summer time.

Reversible hydro box Reversible cylinder unit

Available options
– Packaged or Split type
– With/without booster heater
– With/without expansion vessel
– Cylinder unit has an integrated 200L stainless steel tank
– Hydro box is control ready for domestic hot water with *Reversible cylinder requires the installation
a stand-alone tank (locally supplied) of the drain pan stand PAC-DP01-E.

129
High-performance for domestic hot water re-charge
External plate heat exchanger – more energy savings using ecodan’s unique and
innovative technologies
Save energy in domestic hot water operations COP
(recharging)
<Our test result>
Thanks to an external plate heat exchanger, ecodan offers much higher domestic 140%

hot water efficiency. Compared to our previous model, domestic hot water recharge Our new model (External heat exchanger with scale trap)
120%
efficiency is improved by approximately 17%*1, thereby reducing operating costs.
100%
Initial performance level of previous model (Coil in tank)
Avoid performance loss due to scale 80%
A scale trap is incorporated after the plate heat exchanger to capture calcium scale
particles, thus maintaining the high performance of the external plate heat exchanger. 60%

(Just a 3% reduction during 15 years*2). 40%

20%
Lighter weight
0%
Compared to our previous model, the cylinder unit is up to 15kg lighter*. 0 2 4 6 8 10 12 14 year
This is thanks to the coil incorporated in the tank which has been removed and <*1, *2> Usage condition Tank temperature: 10 degree to 60 degree
replaced by a much lighter plate heat exchanger. Heating up time: 1 hour per 1 day
Supersaturation of CaCO3: 50
*Comparison between EHST20C-VM2C and EHST20C-VM2B. *15 years accelerated testing

Optimised stratification for better comfort


Thanks to the L-shaped inlet pipe from the plate heat exchanger, stratification is well maintained after re-charge.
You do not need to worry about running out of hot water the same as with a conventional coil in tank.
Supply water temperature can be kept high until all the hot water in the tank has been used.

The secret behind our external plate heat exchanger system


Thanks to the unique plate heat exchanger and scale trap technology, a more efficient performance is achieved. In conventional systems,
there is a risk of calcium scale building up on the heat-exchange plate if it is exposed to tap water directly. Therefore, it is difficult to use
plate-based heat exchangers to heat tap water. To resolve this problem, ecodan is equipped with a “scale trap” that catches homogeneous
calcium nuclei in the tap water before it has a chance to grow into large scales, thereby inhibiting build-up in the external heat exchanger.
ecodan can use a plate heat exchanger to heat tap water, resulting in much higher domestic hot water performance.

Notice: In the case of special localished conditions such as very hard tap water, please consult a specialist before installation.

Circulating Water
Tap Water
Hot Water

Pump

Scale Trap

Fresh Water
P-HEX

External P-HEX circuit DHW Storage Tank

130
Unique technology of ecodan Settings can be
performed using
Auto Adaptation an SD card.

Maximize energy savings while retaining comfort at all times *SD logo is a trademark
of SD-3C, LLC

Regarding the relation of flow temperature and unit performance, a 1°C drop ■ Heat curve setting (Example)
in the flow temperature improves the coefficient of performance (COP) of the Flow temp.
ATW system by 2%. This means that energy savings are dramatically affected
by controlling the flow temperature in the system.
If flow
In a conventional system controller, the flow temperature is determined based 60°C temperature is COP is
on the pre-set heat curve depending on the actual outdoor temperature. How- lowered 1°C improved 2%
ever, this requires a complicated setting to achieve the optimal heat curve.

30°C

-15°C 10°C Outdoor temp.

Mitsubishi Electric’s Auto Adaptation function automatically tracks changes in the actual room temperature
and outdoor temperature and adjusts the flow temperature accordingly.
Aiming to realise further comfort and energy savings, Mitsubishi Electric is proud to introduce a revolutionary new controller. Our advanced Auto
Adaptation function measures the room temperature and outdoor temperature, and then calculates the required heating capacity for the room.
Simply stated, the flow temperature is automatically controlled according to the required heating capacity, while optimal room temperature is
maintained at all times, ensuring the appropriate heating capacity and preventing energy from being wasted. Furthermore, by estimating future
changes in room temperature, the system works to prevent unnecessary increases and decreases in the flow temperature.
Accordingly, Auto Adaptation maximises both comfort and energy savings without the need for complicated settings.

■ Future room temperature estimation

Room temp.
(a) Higher than the target room temp. lower the flow temp.

Target temp. (b) Approximately same as the target temp. keep the flow temp.

(c) Lower than the target room temp. raise the flow temp.
Modify the flow temperature by comparing
actual and estimated room temperature.

3 points T0 T1 Current Future Time

Auto Adaptation – [Example]


room temperature control a) Outdoor temperature is gradually decreasing…
0

1. Installation site: Southern Sweden -5


-10°C
2. Detached house with underfloor heating
-10
3. Data in February 2011 -6°C

-15
0:00

1:00

2:00

3:00

4:00

5:00

6:00

7:00

8:00

b) Target flow temperature


Target flow temp. is Target flow temp. goes up
40 36.6°C
gradually lowered. following the heat curve.

35

30 34.6°C
at A-6
30.0°C
25
at A-10
0:00

1:00

2:00

3:00

4:00

5:00

6:00

7:00

8:00

By Auto Adaptation, flow temperature can be lowered even when outdoor temp.
is decreasing.
c) Room temperature Repeats Thermo ON/OFF Room temp. can be kept stable
and room temp. becomes unstable. and stays at the targeted level at the end.
23
Actual with Auto Adaptation
22

21

20

19
0:00

1:00

2:00

3:00

4:00

5:00

6:00

7:00

8:00

By Auto Adaptation, flow temperature can be lowered without sacrificing comfort.


Actual outdoor temperature with Auto Adaptation
with Heat Curve estimation Target room temperature

131
Settings can be

2 zone control (for heating/cooling)


performed using
an SD card.

Simultaneously control two different zones *SD logo is a trademark


of SD-3C, LLC

Using ecodan, it is possible to control two different flow temperatures, thereby managing two different heating load requirements. The system can
adjust and maintain two flow temperatures when different temperatures are required for different rooms; for example, controlling a flow
temperature of 40°C for the bedroom radiators and another flow temperature of 30°C for the living room floor heating.
Another feature of this model is that 2 zone cooling control is now possible. Using these functions it is easy to maintain the most comfortable
temperature in each room and to save energy too.

■ Two temperature zones


Wireless remote controller
2 zone kit with locally supplied components as thermistor

40°C
Hydro box
Pump

Mixing control Flow switch Radiator


FTC
Mixing
valve

Pump
30°C

Mixing tank /header


Flow switch Underfloor heating

*Items such as a mixing tank, mixing valve flow switch and pumps are not included and need to be purchased locally.

Settings can be

2 zone kit
performed using
an SD card.

With optional parts *SD logo is a trademark


of SD-3C, LLC

Cylinder unit connection

2 zone kit Hydro box connection


Manual air vent
255mm

Header

Mixing valve

383mm

Pump

1600mm
255mm
356mm

Easy to install and low maintenance


• All-in-one kit: Key functional components are incorporated in 2 zone kit.
• Easy installation: G1 screw type flexi piping to avoid brazing.
• Compact size: Just to fit on the top of cylinder unit, also wall mountable.

132
Settings can be

Intelligent hybrid control (boiler interlock)


performed using
an SD card.

An existing boiler can be used for extra heating capacity in an efficient way *SD logo is a trademark
of SD-3C, LLC

The flexibility of ecodan’s intelligent control allows the system to be combined with the boiler currently in use. Additionally, this control can judge
which heating source to use either ecodan or the existing boiler, based on various conditions*.
In the event of one heating unit not working due to some unforeseen problem, the other heating system can be used as a back-up, thereby
preventing the heating system operation from stopping completely.
*Please see below “Heat source switchover”.

Intelligent system combining a boiler with ecodan

■ Intelligent boiler interlock system

Hydro box

Room temperature
wireless remote controller (option)
FTC

*Thermostat (field supply) also can be used.


Electricity

Radiator Radiator
Turning boiler on/off Pump
according to operational
conditions.
Other source
(Gas, Oil, etc) Mixing tank

Boiler

* Items such as a mixing tank, and pump are not included and need to be purchased locally.

Heat source switchover - Choose appropriate system based on needs


4 types of heat source switchover logic
1 Switchover based on actual outdoor temperature 3 Switchover based on CO 2 emission level
• Heat source switchover occurs when the outdoor temperature • Heat source switchover occurs to minimise CO 2 emission.
drops below a pre-set temperature. *Pre-registration of CO 2 emission amount from electricity and
2 Switchover based on running cost gas or oil is necessary.
• Heat source switchover occurs by judging optimal operation 4 Switchover can also be activated via external input
based on running cost. • For example, the peak cut signal from electric power company.
*Pre-registration of the energy price of electricity,
and gas or oil per 1kWh is necessary.

133
Smart Grid Ready function
In recent years renewable energy generation has become popular. However, this rapid growing causes the problem of supply and demand gap of
electricity. The aim of “SG Ready” is to make the electricity demand response more flexible by creating a uniform interface for the smart grid
integration of heat pumps. Air-to-Water units need to be able to change the operation pattern when the signal is received from the Smart Grid
Controller.
New ecodan Cylinder, Hydro box and FTC have been modified to communicate with Smart Grid Controller. The communication protocol is based
on “SG Ready” label regulation. (Version 1.1; gültig ab 01.01.2013)

Pattern Input 1 Input 2 Operation


Smart Grid Controller 1 OFF OFF Normal operation

2 ON OFF Switch ON recommendation


FTC
3 OFF ON Switch OFF command SG
4 ON ON Switch ON command

Pattern 1: Normal operation


When there is no signal from the Smart Grid Controller, DHW and Heating operate according to user settings.
Pattern 2: Switch ON recommendation
When set to the “Switch ON” recommendation, the target temperature of DHW is increased a specified amount and the heating “Thermo ON”
condition range is extended.
Pattern 3: Switch OFF command
When the “Switch OFF” command is received, both DHW and Heating are turned off.
Pattern 4: Switch ON command
When the “Switch ON” command is received, the target temperature of DHW is increased to the maximum target temperature and
Heating continues.

Multiple unit control Settings can be


performed using

Connect up to 6 units – Automatic control of multiple units


an SD card.

for bigger capacity and better efficiency *SD logo is a trademark


of SD-3C, LLC

A maximum of 6 units* can be configured according to the heating/cooling load of the building. The most efficient number of operating units is
determined automatically based on heating/cooling load. This enables ecodan to provide optimal room temperature control, and thus superior
comfort for room occupants. Also incorporated is a rotation function that enables each unit to run for an equal time period.
If one of the units malfunctions when using the Multiple Unit Control, another unit can be automatically operated for back-up, thereby preventing
the system operation from stopping completely.
*Only same models (same capacity) can be used.

Multiple unit control


■ Multiple unit control One large unit control
COP ratio (%)
1 unit 2 units 3 units 4 units 5 units 6 units
100

Always high efficient operation !


Inefficient operation
ON/OFF control at low capacity.

Total Capacity

Up to
23kW + 23kW + 23kW + 23kW + 23kW + 23kW 138 kW!!

FTC FTC FTC FTC FTC FTC


slave slave slave slave slave slave

Multiple unit control


FTC
master Main RC

134
Remote controllers
Smart user-friendly controller with stylish design
Main remote controller
• Large screen and backlight for excellent visibility, even in dark environment 13 Jun 2015 13:41

• Multi-language support (supports 15 languages)


• Can be removed from main unit and installed in a remote location (up to 500m)
• Quick reading of operation data (7.5 times faster than previous model)
• Wide range of convenient functions in response to user demand
Function settings
PAR-WR51R-E (Option)
– Energy monitoring – Floor drying mode Receiver
– Two-zone control (cooling and heating) – Weekly timer
Main controller
– Two separate schedules – Holiday mode
– Summer time setting – Legionella prevention
– Built-in room temperature sensors – Error codes
– Hybrid control (boiler interlock)

Wireless remote controller (optional)


• Built-in room temperature sensor; easy to place in the best position to detect room temperature
• Wiring work eliminated PAR-WT50R-E (Option)
• Simple design that is easy to operate Wireless remote controller
• Remote control from any room without needing to choose an installation location
• Backlight and big buttons that are easy to operate
• Domestic hot water boost and cancellation
• Simplified holiday mode

Settings can be

Energy monitoring
performed using
an SD card.

View electricity consumption and heat output on the remote controller *SD logo is a trademark
of SD-3C, LLC

Every end user can now easily check the


energy data of the ecodan heat pump.
2 Jan 2015 23:59
CONSUMED ELECTRICAL ENERGY
Other features Jan 2015
–DHW
–Heatin
57kW
7kW
50kW
Heating capacity Electric energy
– Daily, monthly and yearly data are stored and can be displayed using the main produced used
–Coolin 0kW

remote controller.
– External power meter and heat meter can be connected for accurate measurement.
– SD card is also available for storing data.
*Using pre-set values on the main remote controller, estimated energy consumption/output can be shown without external power
and a heat meter.
Depending on operating condition and system configuration, there is some possibility to show different data from the reality.
*This function is available depending on the version of the outdoor unit model.

Summer time setting Settings can be


performed using
Two separate schedules Settings can be
performed using

Easy adjustment for Pre-setting two different schedules


an SD card. an SD card.

summer time *SD logo is a trademark


of SD-3C, LLC for winter and summer seasons *SD logo is a trademark
of SD-3C, LLC

Just switch the summer time mode ‘on’ using the main remote Two different schedule settings are available for use via the main
controller and the clock in the main remote controller is adjusted to remote controller.
summer time hours. These schedules can be pre-set and changed depending on the season.
This function can release the end user from clock setting tasks. For example, from November to March, space heating and domestic
hot water are used; however, during warm months such as from April
to October, only domestic hot water is used.
<Example>

29 2015 23:59 30 2015 0:00 1 Sep 2015 12:30 Schedule 1 Winter time
7
Schedule timer 1 Apr Oct
6kWh
6kWh
Summer time Schedule timer 2 Nov Mar Space heating daytime
Jan Dec Domestic hot water early morning
15kWh
15kWh

Schedule 2 Summer time

Domestic hot water any time

135
Easy commissioning
Pump for primary water circuit* speed setting possible using ecodan’s main remote controller
Even when the system is running, pump output can be set to one of five different settings using
the main remote controller.
The person commissioning the system can adjust this speed much more easily.
*Speed setting of pump for domestic hot water is not available through the main remote controller
when the system is running.

Flow sensor newly incorporated


The flow sensor is key for monitoring energy output and can also be used to detect flow error as well.
– Flow rate can be checked on the main remote controller.
– Flow rate can also be shown as graphs using the SD card tool.

Run indoor unit* without outdoor unit


During installation or situations such as an outdoor unit malfunction, the indoor unit can be operated using a heater.
While using this mode, flow and tank temperature are selectable.
Fixing and maintenance of the outdoor unit can be done without stopping heating and domestic hot water operation*.
*Models with electric heater only.
*When the indoor unit operation stops, please check all settings after the outdoor unit is connected.

Settings can be

SD* card
performed using
an SD card.

For easier settings and data logging *SD logo is a trademark


of SD-3C, LLC

The initial setting for ecodan is now simpler than ever Hydro box operation panel
Settings can be performed easily
before. The special software enables the required initial and the logging of operation data saved
to an SD card can be confirmed via
settings to be saved to an SD card using a personal a personal computer.
computer. The system set-up is as easy as moving the SD Printed circuit board

card from the computer to the SD card slot in the indoor


unit. Compared to the previous procedure of inputting
settings using the main controller at the installation site,
SD card
a remarkable reduction in set-up time has been achieved. Control and electric box SD card slot SD card

Thus, it is ideal for busy installers.


*SD card function is only used at the time of installation.

Items that can be pre-set Data that can be stored


Simply copying pre-set data to an SD card, Operation data up to a month long can be stored on
the same settings can input into another unit using the SD card. a single SD card
• Initial settings (time display, contact number, etc.) • Consumed electrical energy
• Heating settings • Delivered energy
– Auto adaptation • Flow rate
– Heat curve • Operation time
– Two different temperature zones (heating and cooling)
• Defrost time
• Interlocked boiler operation settings
• Actual temperature
• Holiday mode settings
– Room temperature
• Schedule timer settings (two separate schedules)
• Domestic hot water settings – Flow temperature
• Legionella prevention settings – Return temperature
– Domestic hot water temperature
All items that are set by the main controller can be set via a personal – Outdoor temperature
computer. • Error record
• Input signal
• Etc.

136
Split type specifications
Indoor unit
<Cylinder unit> Small capacity Medium capacity UK model
Model name EHST20D- EHST20D- EHST20D- EHST20D- EHST20D- EHST20C- EHST20C- EHST20C- EHST20C- EHST20C- EHST20C- EHST20C- EHST20C- EHST20C- EHST20D-
VM2C YM9C VM2EC MHC MEC VM2C VM6C YM9C TM9C VM2EC VM6EC YM9EC MEC MHCW MHCW
Type Heating only
Immersion heater – – – × – – – – – – – – – × ×
Expansion vessel × × – × – × × × × – – – – × ×
Booster heater × × × – – × × × × × × × – – –
Dimensions H×W×D mm 1600×595×680
Weight (empty) kg 103 105 97 103 96 110 111 112 112 104 105 106 103 110 103
Power supply (V / Phase / Hz) 230/Single/50
Heater Booster Power supply (V / Phase / Hz) 230/Single/50 400/Three/50 230/Single/50 – 230/Single/50 400/Three/50 230/Three/50 230/Single/50 400/Three/50 –
heater
Capacity kW 2 9 (3/6/9) 2 – 2 6 (2/4/6) 9 (3/6/9) 9 (3/6/9) 2 6 (2/4/6) 9 (3/6/9) –
Current A 9 13 9 – 9 26 13 23 9 26 13 –
Breaker size A 16 16 16 – 16 32 16 32 16 32 16 –
Immersion Power supply (V / Phase / Hz) – 230/Single/50 – 230/Single/50
heater
Capacity kW – 3 – 3
Current A – 13 – 13
Breaker size A – 16 – 16
Domestic
Volume / Material L/– 200 / Stainless steel
hot water tank
Guaranteed Ambient °C 0~35*1
operating
Outdoor Heating °C See outdoor unit spec table
range*1
Cooling °C –
Target Heating Room temperature °C 10~30
temperature
Flow temperature °C 25~60
range
Cooling Room temperature °C –
Flow temperature °C –
DHW °C 40~60
Legionella prevention °C 60~70
Sound pressure level (SPL) dB (A) 28

*1 The indoor environment must be frost-free

<Hydro box> Small capacity Medium capacity Large capacity


Model name EHSD- EHSD- EHSD- EHSD- EHSC- EHSC- EHSC- EHSC- EHSC- EHSC- EHSC- EHSC- EHSE- EHSE-
MEC MC VM2C YM9C MEC VM2C VM2EC VM6C VM6EC YM9C YM9EC TM9C MEC YM9EC
Type Heating only
Immersion heater – – – – – – – – – – – – – –
Expansion vessel – × × × – × – × – × – × – –
Booster heater – – × × – × × × × × × × – ×
Dimensions H×W×D mm 800×530×360 950×600×360
Weight (empty) kg 38 43 44 45 42 48 43 49 44 49 44 49 60 62
Power supply (V / Phase / Hz) 230/Single/50
Heater Booster Power supply (V / Phase / Hz) – – 230/Single/50 400/Three/50 – 230/Single/50 400/Three/50 230/Three/50 – 400/Three/50
heater
Capacity kW – – 2 9 (3/6/9) – 2 2 6 (2/4/6) 6 (2/4/6) 9 (3/6/9) 9 (3/6/9) 9 (3/6/9) – 9 (3/6/9)
Current A – – 9 13 – 9 9 26 26 13 13 23 – 13
Breaker size A – – 16 16 – 16 16 32 32 16 16 32 – 16
Guaranteed Ambient °C 0~35*1
operating
Outdoor Heating °C See outdoor unit spec table
range*1
Cooling °C –
Target Heating Room temperature °C 10~30
temperature
Flow temperature °C 25~60
range
Cooling Room temperature °C –
Flow temperature °C –
Sound pressure level (SPL) dB (A) 28 30

*1 The indoor environment must be frost-free

Small
<Reversible cylinder unit> Small capacity Medium capacity <Reversible hydro box> capacity Medium capacity Large capacity

Model name ERST20D- ERST20D- ERST20C- ERST20C- Model name ERSD- ERSC- ERSC- ERSE- ERSE-
VM2C MEC VM2C MEC VM2C MEC VM2C MEC YM9EC
Type Heating and cooling Type Heating and cooling
Immersion heater – – – – Immersion heater – – – – –
Expansion vessel × – × – Expansion vessel × – × – –
Booster heater × – × – Booster heater × – × – ×
Dimensions H×W×D mm 1600×595×680 Dimensions H×W×D mm 800×530×360 950×600×360
Weight (empty) kg 103 96 110 103 Weight (empty) kg 45 43 49 61 63
Power supply (V / Phase / Hz) 230/Single/50 Power supply (V / Phase / Hz) 230/Single/50
Heater Booster Power supply (V / Phase / Hz) 230/Single/50 – 230/Single/50 – Heater Booster Power supply (V / Phase / Hz) 230/Single/50 – 230/Single/50 – 400/Three/50
heater heater
Capacity kW 2 – 2 – Capacity kW 2 – 2 – 9 (3/6/9)
Current A 9 – 9 – Current A 9 – 9 – 13
Breaker size A 16 – 16 – Breaker size A 16 – 16 – 16
Immersion Power supply (V / Phase / Hz) – – – – Guaranteed Ambient °C 0~35*1
heater operating
Capacity kW – – – – Outdoor Heating °C See outdoor unit spec table
range*1
Current A – – – – Cooling °C See outdoor unit spec table (minimum 10°C*2)
Breaker size A – – – – Target Heating Room temperature °C 10~30
temperature
Domestic Flow temperature °C 25~60
Volume / Material L/– 200 / Stainless steel range
hot water tank Cooling Room temperature °C –
Guaranteed Ambient °C 0~35*1 Flow temperature °C 5~25
operating
Outdoor Heating °C See outdoor unit spec table Sound pressure level (SPL) dB (A) 28 30
range*1
Cooling °C See outdoor unit spec table (minimum 10°C*2) *1 The environment must be frost-free
Target Heating Room temperature °C 10~30 *2 If you use our system in cooling mode at the low ambient temperature (10°C or below),
temperature
range
Flow temperature °C 25~60 there are some risks of plate heat exchanger breaking by frozen water.
Cooling Room temperature °C –
Flow temperature °C 5~25
DHW °C 40~60
Legionella prevention °C 60~70
Sound pressure level (SPL) dB (A) 28

*1 The indoor environment must be frost-free


*2 If you use our system in cooling mode at the low ambient temperature (10°C or below),
there are some risks of plate heat exchanger breaking by frozen water.

137
Outdoor unit
Model name Eco Inverter Power Inverter
SUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ-
SW45VA (H)*1 SW50VKA (-BS) SW75V/YAA (-BS) SW100V/YAA (-BS) SW75VHA (-BS) SW100V/YHA (-BS) SW120V/YHA (-BS) SW160YKA (-BS) SW200YKA (-BS)
Dimensions H×W×D mm 880×840×330 630×809×300 1020×1050×480 1020×1050×480 943×950×330 1350×950×330 1350×950×330 1338×1050×330 1338×1050×330
Product weight (empty) kg 54 43 92/104 114/126 75 118/130 118/130 136 136
Power supply (V / Phase / Hz) VHA : 230/Single/50 YHA, YKA : 400/Three/50
Heating Capacity kW 4.50 5.50 8.00 11.20 8.00 11.20 16.00 22.00 25.00
(A7/W35)
COP 5.06 4.42 4.40 4.46 4.40 4.45 4.10 4.20 4.00
Power input kW 0.889 1.244 1.818 2.517 3.902 5.238 6.250
Heating Capacity kW 3.50 5.00 7.50 10.00 7.50 10.00 12.00 16.00 20.00
(A2/W35)
COP 3.40/3.04 2.97 3.40 3.32 3.40 3.32 3.24 3.11 2.80
Power input kW 1.029/1.151 1.684 2.206 3.009 3.704 5.145 7.143
Cooling Capacity kW 4.00 4.50 7.10 10.00 6.60 9.10 12.50 16.00 20.00
(A35/W7)
EER 2.73 2.76 2.70 2.83 2.82 2.75 2.32 2.76 2.25
Power input kW 1.465 1.630 2.340 3.309 5.388 5.797 8.889
Cooling Capacity kW 3.80 5.00 7.10 10.00 7.10 10.00 14.00 18.00 22.00
(A35/W18)
EER 4.28 4.60 4.43 4.47 4.43 4.35 4.08 4.56 4.10
Power input kW 0.888 1.087 1.603 2.299 3.431 3.947 5.366
Sound pressure
Heating dB (A) 52 46 43 47 51 54 54 62 62
level (SPL)
Sound power
Heating dB (A) 61 63 58 60 68 70 72 78 78
level (PWL)
Operating current (max) A 12.0 13.0 22.0/11.5 28.0/12.0 17.0 29.5/13.0 29.5/13.0 19.0 21.0
Breaker size A 20 16 25.0/16.0 32.0/16.0 25 32/16 32/16 25 32
Piping Diameter Liquid/Gas mm 6.35/12.7 6.35/12.7 9.52/15.88 9.52/15.88 9.52/15.88 9.52/15.88 9.52/15.88 9.52/25.4 12.7/25.4
Max. length Out-In m 30 40 40 75 40 75 75 80 80
Max. height Out-In m 30 30 10 10 30 30 30 30 30
Guaranteed Heating °C –15 to +24 –15 to +21 –20 to +24 –20 to +24 –20 to +21 –20 to +21 –20 to +21 –20 to +21 –20 to +21
operating
DHW °C –15 to +35 –15 to +35 –20 to +35 –20 to +35 –20 to +35 –20 to +35 –20 to +35 –20 to +35 –20 to +35
range
Cooling*2 °C +10 to +46 –15 to +46 –15 to +46 –15 to +46 –15 to +46 –15 to +46 –15 to +46 –15 to +46 –15 to +46

ZUBADAN
Model name PUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ-
SHW80V/YAA (-BS) SHW112V/YAA (-BS) SHW80VHA SHW112V/YHA SHW140YHA SHW230YKA2
Dimensions H×W×D mm 1020×1050×480 1020×1050×480 1350×950×330 1350×950×330 1350×950×330 1338×1050×330
Product weight (empty) kg 116/128 116/128 120 120/134 134 149
Power supply (V / Phase / Hz) VHA : 230/Single/50 YHA, YKA : 400/Three/50
Heating Capacity kW 8.00 11.20 8.00 11.20 14.00 23.00
(A7/W35)
COP 4.65 4.40 4.65 4.46 4.22 3.65
Power input kW 1.720 2.511 3.318 6.301
Heating Capacity kW 8.00 11.20 8.00 11.20 14.00 23.00
(A2/W35)
COP 3.55 3.22 3.55 3.34 2.96 2.37
Power input kW 2.254 3.353 4.730 9.705
Cooling Capacity kW 7.10 10.00 7.10 10.00 12.50 20.00
(A35/W7)
EER 3.31 2.83 3.31 2.83 2.17 2.22
Power input kW 2.145 3.534 5.760 9.009
Cooling Capacity kW 7.10 10.00 7.10 10.00 12.50 20.00
(A35/W18)
EER 4.52 4.74 4.52 4.74 4.26 3.55
Power input kW 1.571 2.110 2.934 5.634
Sound pressure
Heating dB (A) 45 47 51 52 52 59
level (SPL)
Sound power
Heating dB (A) 59 60 69 70 70 75
level (PWL)
Operating current (max) A 22.0/13.0 28.0/13.0 29.5 35.0/13.0 13.0 26.0
Breaker size A 25.0/16.0 32.0/16.0 32 40/16 16 32
Piping Diameter Liquid/Gas mm 9.52/15.88 9.52/15.88 9.52/15.88 9.52/15.88 9.52/15.88 12.7/25.4
Max. length Out-In m 75 75 75 75 75 80
Max. height Out-In m 30 30 30 30 30 30
Guaranteed Heating °C –28 to +24 –28 to +24 –28 to +21 –28 to +21 –28 to +21 –25 to +21
operating
DHW °C –28 to +35 –28 to +35 –28 to +35 –28 to +35 –28 to +35 –25 to +35
range
Cooling*2 °C –15 to +46 –15 to +46 –15 to +46 –15 to +46 –15 to +46 –15 to +46

Note: based on EN 14511 (Input to circulation pump is not included.) It may differ according to the system configuration.
*1 SUHZ-SW45VAH incorporates base heater.
*2 Optional air protection guide is required where ambient temperature is lower than – 5°C.

Small capacity Medium capacity Large capacity


Split type (Under 5kW )* (7.5kW –14kW )* (>
= 16kW)*

PUHZ-SHW80/112AA PUHZ-SHW80/112/140 PUHZ-SHW230

PUHZ-SW50 PUHZ-SW75 PUHZ-SW75/100AA PUHZ-SW100/120 PUHZ-SW160/200

Eco
Inverter
SUHZ-SW45

138
Packaged type specifications
Indoor unit
<Cylinder unit>
Model name EHPT20X-VM2C EHPT20X-VM6C EHPT20X-YM9C EHPT20X-TM9C EHPT20X-MHCW*2
Type Heating only
Immersion heater – – – – ×
Expansion vessel × × × × ×
Booster heater × × × × –
Dimensions H×W×D mm 1600×595×680
Weight (empty) kg 98 99 100 100 98
Power supply (V / Phase / Hz) 230/Single/50
Heater Booster Power supply (V / Phase / Hz) 230/Single/50 400/Three/50 230/Three/50 –
heater
Capacity kW 2 6 (2/4/6) 9 (3/6/9) 9 (3/6/9) –
Current A 9 26 13 23 –
Breaker size A 16 32 16 32 –
Immersion Power supply (V / Phase / Hz) – – – – 230/Single/50
heater
Capacity kW – – – – 3
Current A – – – – 13
Breaker size A – – – – 16
Domestic
Volume / Material L/– 200 / Stainless steel
hot water tank
Guaranteed Ambient °C 0~35*1
operating range*1
Outdoor °C See outdoor spec table
Target Heating Room temperature °C 10~30
temperature
Flow temperature °C 25~60
range
DHW °C 40~60
Legionella prevention °C 60~70
Sound pressure level (SPL) dB (A) 28

*1 The indoor environment must be frost-free *2 UK model


<Hydro box>
Model name EHPX-VM2C EHPX-VM6C EHPX-YM9C
Type Heating only
Immersion heater – – –
Expansion vessel × × ×
Booster heater × × ×
Dimensions H×W×D mm 800×530×360
Weight (empty) kg 37 38 38
Power supply (V / Phase / Hz) 230/Single/50
Heater Booster Power supply (V / Phase / Hz) 230/Single/50 230/Single/50 400/Three/50
heater
Capacity kW 2 6 (2/4/6) 9 (3/6/9)
Current A 9 26 13
Breaker size A 16 32 16
Guaranteed Ambient °C 0~35*1
operating range*1
Outdoor °C See outdoor spec table
Target temper- Heating Room temperature °C 10~30
ature range
Flow temperature °C 25~60
Sound pressure level (SPL) dB (A) 28

*1 The indoor environment must be frost-free

Outdoor unit Power Inverter ZUBADAN


Model name PUHZ-W50VHA2 (-BS) PUHZ-W85VHA2 (-BS) PUHZ-W112VHA (-BS) PUHZ-HW112YHA2 (-BS) PUHZ-HW140VHA2 (-BS) PUHZ-HW140YHA2 (-BS)
Dimensions H×W×D mm 740×950×330 943×950×330 1350×1020×330 1350×1020×330 1350×1020×330 1350×1020×330
Product weight (empty) kg 64 79 133 148 134 148
Power supply (V / Phase / Hz) 230/Single/50 230/Single/50 230/Single/50 400/Three/50 230/Single/50 400/Three/50
Heating Capacity kW 5.00 9.00 11.20 11.20 14.00 14.00
(A7/W35)
COP 4.50 4.18 4.47 4.42 4.25 4.25
Power input kW 1.111 2.153 2.506 2.534 3.294 3.294
Heating Capacity kW 5.00 8.50 11.20 11.20 14.00 14.00
(A2/W35)
COP 3.50 3.17 3.34 3.11 3.11 3.11
Power input kW 1.429 2.681 3.353 3.601 4.502 4.502
Sound pressure
Heating dB (A) 46 48 53 53 53 53
level (SPL)
Sound power
Heating dB (A) 61 66 69 67 67 67
level (PWL)
Operating current (max) A 13.0 23.0 29.5 13.0 35.0 13.0
Breaker size A 16 25 32 16 40 16
Guaranteed Heating °C –15 to +21 –20 to +21 –20 to +21 –25 to +21 –25 to +21 –25 to +21
operating range
DHW °C –15 to +35 –20 to +35 –20 to +35 –25 to +35 –25 to +35 –25 to +35
Cooling*1 °C –15 to +46 –15 to +46 –15 to +46 –15 to +46 –15 to +46 –15 to +46

Note: based on EN 14511 (Input to circulation pump is included.) It may differ according to the system configuration.
*1 Optional air protection guide is required where ambient temperature is lower than –5°C.

Medium capacity Small capacity Medium capacity


Packaged type (7.5kW –14kW )* Packaged type (Under 5kW )* (7.5kW –14kW )*

PUHZ-HW112/140 PUHZ-W50 PUHZ-W85 PUHZ-W112


139
Optional Parts

Split type
<Indoor unit>
Parts name Model name Specification Cylinder unit Hydro box
EHST20C- EHST20C- EHST20C- EHST20C- EHST20C- EHST20C- EHST20C- EHST20C- EHST20D- EHST20D- EHST20D- EHST20D- EHST20D- EHST20C- EHST20D- ERST E✽SD or E✽SC E✽SE
VM2C VM6C YM9C TM9C VM2EC VM6EC YM9EC MEC VM2C YM9C VM2EC MEC MHC MHCW MHCW models models models
Wirelss remote PAR-WT50R-E
× × × × × × × × × × × × × × × × × ×
controller
Wirelss receiver PAR-WR51R-E × × × × × × × × × × × × × × × × × ×
Thermistors PAC-SE41TS-E For room temp. × × × × × × × × × × × × × × × × × ×
For buffer and zone
PAC-TH011-E × × × × × × × × × × × × × × × × × ×
(flow and return temp.)
PAC-TH011TK-E For tank temp. (5m) × × × × × – – – – – – – – – – – × ×
PAC-TH011TKL-E For tank temp. (30m) × × × × × – – – – – – – – – – – × ×
For boiler
PAC-TH011HT-E × × × × × × × × × × × × × × × × × ×
(flow and return temp.)
Immersion heater PAC-IH03V2-E 1Ph 3kW × × × × × × × × × × × × – – – × – –
EHPT accessories
PAC-WK01UK-E – – – – – – – – – – – – – × × – – –
for UK
Joint pipe For PUHZ-SW200YKA/
PAC-SG73RJ-E SHW230YKA2 (-BS) – – – – – – – – – – – – – – – – – ×
ø9.52 ø12.7
Wi-Fi interface MAC-567IF-E × × × × × × × × × × × × × × × × × ×
D665mm H270mm W595mm
Drain pan stand PAC-DP01-E – – – – – – – – – – – – – – – × *1 – –
N/W: 14.5kg
2 zone kit PAC-TZ01-E × × × × × × × × × × × × × × × × × –

*1 PAC-DP01-E is necessary when you use ERST units. If you use ERST units without this parts, drain will be flowed from the base of units, in cooling mode.
<Outdoor unit>
Parts name Model name Eco
Power Inverter ZUBADAN
Inverter
SUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ-
SW45VA(H) SW50VKA(-BS) SW75V/YAA(-BS) SW100V/YAA(-BS) SW75VHA(-BS) SW100V/YHA(-BS) SW120V/YHA(-BS) SW160YKA(-BS) SW200YKA(-BS) SHW80V/YAA(-BS) SHW112V/YAA(-BS) SHW80VHA SHW112V/YHA SHW140YHA SHW230YKA2
Connector for drain hose heater PAC-SE60RA-E – – × × × × × × × × × × × × ×
signal output
PAC-SE61RA-E – × – – – – – – – – – – – – –
Air discharge guide MAC-886SG-E × – – – – – – – – – – – – – –
PAC-SJ07SG-E – × – – – – – – – – – – – – –
PAC-SG59SG-E – – – – × × × – – – – × × × –
PAC-SG96SG-E – – ×*1 ×*1 – – – × × ×*1 ×*1 – – – ×
Air protection guide PAC-SJ06AG-E – × – – – – – – – – – – – – –
PAC-SH63AG-E – – – – × × × – – – – × × × –
PAC-SH95AG-E – – ×*1 ×*1 – – – × × ×*1 ×*1 – – – ×
Attachment PAC-SJ82AT-E – – ×*1 ×*1 – – – – – ×*1 ×*1
Drain socket PAC-SG61DS-E – – × × × × × × × × × – – – –
PAC-SJ08DS-E – × – – – – – – – – – – – – –
Centralised drain pan PAC-SG63DP-E – × – – – – – – – – – – – – –
PAC-SG64DP-E – – – – × × × – – – – – – – –
PAC-SH97DP-E – – – – – – – × × – – – – – –
PAC-SJ83DP-E – – × × – – – – – × ×
Control / Service tool PAC-SK52ST – × × × × × × × × × × × × × ×

*1 Attachment (PAC-SJ82AT-E) is necessary for the Air Guide.


Package type
<Indoor unit>
Parts name Model name Specification Cylinder unit Hydro box
EHPT20X-VM2C EHPT20X-VM6C EHPT20X-YM9C EHPT20X-TM9C EHPT20X-MHCW EHPX-VM2C EHPX-VM6C EHPX-YM9C
Wireless remote controller PAR-WT50R-E × × × × × × × ×
Wireless receiver PAR-WR51R-E × × × × × × × ×
Thermistors PAC-SE41TS-E For room temp. × × × × × × × ×
For buffer and zone
PAC-TH011-E × × × × × × × ×
(flow and return temp.)
PAC-TH011TK-E For tank temp. × × × × × × × ×
PAC-TH011TKL-E For tank temp. (longer) × × × × × × × ×
For boiler
PAC-TH011HT-E × × × × × × × ×
(flow and return temp.)
Immersion heater PAC-IH03V2-E 1Ph 3kW × × × × – – – –
EHPT accessories for UK PAC-WK01UK-E – – – – × – – –
Wi-Fi interface MAC-567IF-E × × × × × × × ×
2 zone kit PAC-TZ01-E × × × × × × × ×

<Outdoor unit>
Parts name Model name Power Inverter ZUBADAN
PUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ-
W50VHA2(-BS) W85VHA2(-BS) W112VHA (-BS) HW112YHA2(-BS) HW140VHA2(-BS) HW140YHA2(-BS)
Connector for drain hose heater signal output PAC-SE60RA-E × × × × × ×
Air discharge guide PAC-SG59SG-E × × × × × ×
Air protection guide PAC-SH63AG-E × × × × × ×
Drain socket PAC-SG61DS-E × × × – – –
Centralised drain pan PAC-SG64DP-E × × – – – –
Control / Service tool PAC-SK52ST – – – – – –

Interface/Flow temperature controller

Parts name Model name Description

Capacity step control interface PAC-IF011B-E 1 PC Board w/ Case


Flow temperature controllers PAC-IF032B-E 1 PC Board w/ Case
System controllers PAC-IF061B-E 1 PC Board w/ Case
PAC-IF062B-E 1 PC Board w/ Case
PAC-IF063B-E 1 PC Board w/ Case
PAC-SIF051B-E 1 PC Board w/ Case
Note: SUHZ CANNOT be connected to these IFs.

140
Combination table

Type Model name Package type Split type


Eco
Power Inverter ZUBADAN Power Inverter
Inverter
PUHZ-
PUHZ- PUHZ- PUHZ- PUHZ- SUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ-
W50VHA2 W85VHA2 W112VHA HW112YHA2 HW140VHA2/ SW45VA(H) SW50VKA SW75VAA SW75YAA SW100VAA SW100YAA SW75VHA
YHA2

EHST20C-VM2C ● ● ●
EHST20C-VM6C ● ● ●
EHST20C-YM9C ● ● ●
EHST20C-TM9C ● ● ●
EHST20C-VM2EC ● ● ●
EHST20C-VM6EC ● ● ●
EHST20C-YM9EC ● ● ●
EHST20C-MEC ● ● ●
EHST20C-MHCW ● ● ●
EHST20D-VM2C ● ● ● ● ●
EHST20D-MEC ● ● ● ● ●
EHST20D-MHC ● ● ● ● ●
Cylinder unit
EHST20D-MHCW ● ● ● ● ●
EHST20D-VM2EC ● ● ● ● ●
EHST20D-YM9C ● ● ● ● ●
ERST20C-MEC ● ● ●
ERST20C-VM2C ● ● ●
ERST20D-MEC ● ● ● ● ●
ERST20D-VM2C ● ● ● ● ●
EHPT20X-VM2C ● ● ● ● ●
EHPT20X-VM6C ● ● ● ● ●
EHPT20X-YM9C ● ● ● ● ●
EHPT20X-TM9C ● ● ● ● ●
EHPT20X-MHCW ● ● ● ● ●
EHSC-VM2C ● ● ●
EHSC-VM2EC ● ● ●
EHSC-VM6C ● ● ●
EHSC-VM6EC ● ● ●
EHSC-YM9C ● ● ●
EHSC-YM9EC ● ● ●
EHSC-TM9C ● ● ●
EHSC-MEC ● ● ●
EHSD-VM2C ● ● ● ● ●
EHSD-YM9C ● ● ● ● ●
EHSD-MEC ● ● ● ● ●
Hydro box
EHSD-MC ● ● ● ● ●
ERSC-VM2C ● ● ●
ERSC-MEC ● ● ●
ERSD-VM2C ● ● ● ● ●
EHPX-VM2C ● ● ● ● ●
EHPX-VM6C ● ● ● ● ●
EHPX-YM9C ● ● ● ● ●
EHSE-YM9EC
EHSE-MEC
ERSE-YM9EC
ERSE-MEC

141
Split type ATA/ATW Hybrid system

Power Inverter ZUBADAN Mr. SLIM+ PUMY+ ecodan

PUHZ- PUHZ- PUHZ- PUMY- PUMY- PUMY-


PUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ- PUHZ-
SW100VHA/ SW120VHA/ SW160YKA SW200YKA SHW80VAA SHW80YAA SHW112VAA SHW112YAA SHW80VHA SHW112VHA/ SHW140YHA SHW230YKA2 FRP71VHA2 P112VKM4/ P125VKM4/ P140VKM4/
YHA YHA YHA YKM(E)4 YKM(E)4 YKM(E)4

● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ●

● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ●

● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●

● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ●

● ● ●
● ● ●
● ● ●
● ● ●
● : Combination is available. Blank : Combination is NOT available.
142

You might also like