Scribd Logo
Upload

Welcome to Scribd!

  • 41 views

    Valve Packaging

    Uploaded by

    Gonzalo Alonso Quintana
    This document provides product information on Slade's pump and valve packing materials including the 3300C, 3300G, 3300W, and 3300CJ models. It describes the materials' reinforcement, temperature resistance, pressure limits, pH range, and applications. The 3300G is highlighted for its advantages like low emissions, anti-extrusion in each ring, temperature resistance to 1800°F, and ability to seal pressures to 5000 PSI without special rings. Installation instructions are provided noting the use of 5 or fewer sealing rings and spacer bushings to reduce rings.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Valve Packaging

    Uploaded by

    Gonzalo Alonso Quintana
    41 views6 pages
    This document provides product information on Slade's pump and valve packing materials including the 3300C, 3300G, 3300W, and 3300CJ models. It describes the materials' reinforcement, temperature resistance, pressure limits, pH range, and applications. The 3300G is highlighted for its advantages like low emissions, anti-extrusion in each ring, temperature resistance to 1800°F, and ability to seal pressures to 5000 PSI without special rings. Installation instructions are provided noting the use of 5 or fewer sealing rings and spacer bushings to reduce rings.

    Original Description:

    Valve

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides product information on Slade's pump and valve packing materials including the 3300C, 3300G, 3300W, and 3300CJ models. It describes the materials' reinforcement, temperature resistance, pressure limits, pH range, and applications. The 3300G is highlighted for its advantages like low emissions, anti-extrusion in each ring, temperature resistance to 1800°F, and ability to seal pressures to 5000 PSI without special rings. Installation instructions are provided noting the use of 5 or fewer sealing rings and spacer bushings to reduce rings.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    41 views6 pages

    Valve Packaging

    Uploaded by

    Gonzalo Alonso Quintana
    This document provides product information on Slade's pump and valve packing materials including the 3300C, 3300G, 3300W, and 3300CJ models. It describes the materials' reinforcement, temperature resistance, pressure limits, pH range, and applications. The 3300G is highlighted for its advantages like low emissions, anti-extrusion in each ring, temperature resistance to 1800°F, and ability to seal pressures to 5000 PSI without special rings. Installation instructions are provided noting the use of 5 or fewer sealing rings and spacer bushings to reduce rings.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    Product Information

    3300C – Slade’s Cost Effective Pump and Valve Packing

    Each yarn of graphite foil is reinforced with high


    Reinforcement:
    strength structural carbon fiber

    Mild Oxidizers to 1800°F/1000°C (for high


    Temp: temperatures, e.g., over 1000°F/540°C, consult the
    factory)*

    Valves to 1000 PSI/70 BAR (for higher pressures,


    Pressures:
    consult factory)*

    pH Range: 1-14

    Inconel wire reinforced for higher pressures: 5000


    3300W:
    PSI/350 BAR

    3300LC: Low chloride, high purity for nuclear service

    3300LS: Low sulfur, high purity for nuclear service

    3300G – Slade’s Best All Purpose Pump and Valve Packing

    Corners and yarns of graphite foil reinforced with


    Reinforcement:
    high strength structural carbon fiber

    Mild Oxidizers to 1800°F/1000°C (for high


    Temp: temperatures, e.g., over 1000°F/540°C, consult the
    factory)*

    Pressures: Valves to 5000 PSI/350 BAR without end-rings*

    Flush-free in many services to 4800 FPM (1400


    Pumps:
    m/min)

    pH Range: 1-14

    Applications: Chemicals, steam, hydrocarbons, etc.

    Advantages 3300G Advantages

    Installation: 1. Check clearances and dimensions


    2. Best to use no more than 5 rings in stuffing
    box (use Slade spacer bushings to reduce
    rings)
    3. Cut rings on the bias (45° angle), stagger
    joints
    4. Compress each sealing ring at least 25%
    (especially the first ring). Do not compress
    spacer bushings.
    5. Loosen gland to allow it to relax
    6. Snug the gland bolts and start the pump

    3300GLC: Low chloride for nuclear service

    3300GLS: Low sulfur for nuclear service

    3300W – Slade’s Best Valve Packing

    Each yarn of graphite foil is reinforced with


    Reinforcement: InconelTM Foil shrouded in high strength carbon
    fiber

    Mild oxidizers to 1800°F/1000°C (for high


    Temp: temperatures, e.g., over 1000°F/540°C, consult the
    factory)*

    Pressures: Up to 5,000 psi/345 psi*

    3300CJ – Slade’s Anti-Extrusion Carbon Fiber Packing

    Description: Carbon jacketed 3300C

    Valves to 1000 psi/ 70 bar (for higher pressures,


    Pressures:
    consult factory)*

    Application: Used as anti-extrusion end ring

    *As the operating temperature increases, the pressure limit of the packing
    decreases.

    Advantages of 3300 Products

    Applications
     Gate Valves
     Globe Valves
     Pinch Valves
     Diaphram Valves
     Needle Valves
     Plug Valves
     Butterfly Valves
     Ball Valves
     Check Valves
     Relief Valves
     Control Valves
     Knife Valves
    Fire Safe
     Slade braided graphite foil is API Fire Test Certified
     API 589 First Edition
     API 607 Fourth Edition (modified by EXXON Specs)
     Tested by Southwest Research Institute
     Witnessed by 3 EXXON Engineers
     Temperatures to 1800°F/1000°C
     Tested at 5% of allowable standard
     Performed under a grant from the American Petroleum Institute
     Warning: Valves sealed with packings containing lubricants or blocking
    agents (PTFE) may cause secondary fires when exposed to the intense heat
    of a fire in another unit, which would cause packing shrinkage and leakage
    of flammable fluids causing a secondary fire.
     SLADE Patented Packings: rated FIRE SAFE
    Emission Safe
     PERF Emission Standards
     Contact Slade for documentation
     EXXON-Emission Report:
    o Emission tests, performed at a leading petroleum company’s test
    facility in Florham Park, NJ (using PERF procedures and standards),
    show that Slade patented, reinforced braided graphite foil
    outperformed standard die-formed graphite sealing rings.
    o Slade reduced emissions by 74%.
     Corpus Report:
    o A major Gulf Coast, USA refinery reports that 96% of the 325 valves
    packed with slade reported zero ppm emissions. Most of these valves
    were packed in the field by inexperienced installers.
     Cambridge Report:
    o A major USA West Coast refinery reports that after 5 years, 96% of the
    282 field installed valves were at zero emissions and that the 3,000 psi
    hydrogen control valves never went over 9 ppm during the 5 year test.
    Most of these valves were packed in the field.
    All claims made herein are documented.
    3300G Advantages in Particular

    1. Seals Fugitive Emissions to below 50 PPM!


    2. Puts anti-extrusion into each ring (as opposed to just top or bottom)
    3. Puts the tensile strength of graphite fiber into the sealability of flexible
    graphite (see next slide)
    4. Reduces inventory and cost:
    1. By eliminating die-formed rings for each size
    2. By having a few standard sizes for all valves and pumps
    3. By not ruining an entire packing set because of one ruined ring (sets
    not required)
    4. In many applications, no need to remove old packing, just add ring
    5. No End-Rings Required: Puts wiping action in each ring to prevent
    build-up of graphite particles at top and bottom rings and the loss of volume
    in between
    6. Extremely high tensile strengths achieved with carbon/graphite core and
    corners
    7. No risk of misplacement of the anti-extrusion rings (each ring acts as an
    anti-extrusion device no matter where you put it). Fewer installation errors
    8. High operating temperatures (typically: 1,800° F)
    9. Conforms to the geometry of the stuffing box and stem; undersized or
    worn stems and shafts easily sealed
    10. “Live-loading” not required (no weight loss at temperatures up to 1,000
    degrees F).
    11. Seals pressures to 5,000 PSI in Valves, without special rings
    12. Highly polished surfaces are not required since natural, exfoliated
    graphite fills in the interstices of rougher surfaces, providing a lubricated
    surface: graphite against graphite (recommendations are RMS. 16 to 32)
    13. Handles media within full 1-14 pH

    Enviro-Foil Spacer Bushings

    New Enviro-Foil spacer bushings replace carbon bushings for Slade’s valve repair
    customers.

    Slade’s patented technology for metallic foil inserted braiding yarns eliminates the
    machined carbon bushings used as spacers in stuffing boxes.

    EPRI (Electrical Power Research Institute) has proven that using more than five
    rings of packing reduces the sealing capability of all valve packings. Machined
    carbon bushings are used to act as space fillers to improve valve-sealing
    performance.

    Slade’s patented technology, has lead to the development of a simpler spacer


    system that is more user friendly.

    Available in pre-formed rings.

    Also excellent as an Anti-Extrusion Ring!!!

    Vapor Depositioned 3300G Spacer Bushings

    The Vapor Depositioned 3300G Spacer Bushing (VDG-3300G) is a densely die-


    formed bushing of braided yarns of graphite foil reinforced with carbon fiber.

    This VDG-3300G is a non-metallic bushing that may be used in automatic control


    valve applications. Contact the factory.
    General Installation

     Please contact Slade for detailed Installation Instructions


     Check clearances and dimensions
     Best to use no more than 5 sealing rings in stuffing box (use Slade’s Enviro-
    Foil Spacer Bushings to reduce rings)
     Cut sealing rings on the bias (45° angle), stagger joints
     Compress each sealing ring 25%-30% (use packing compressors as
    needed). Do not compress spacer bushings.
     Loosen gland to allow it to relax
     Snug the gland bolts

    You might also like