m

. co
ns
io
ut
ol
-s
ar

Update Date 2014.10.27

C

Model QPI-BM09-1402-011
Firmware Date
 Warning / Caution
 When installing the main unit, do not remove or alter existing
vehicle fasteners, including nuts, bolts, screw, clips, and fittings.
Never detach, move or alter existing vehicle wiring, including
electrical grounds and straps. Alteration of existing vehicle
Warning components may make vehicle unsafe to operate. Should be
no any electronic devices or magnetic pole around installation

m
place.
 Air bags are vital part of a safety system. Never install main unit
in a way which will alter air bag wiring or interfere with air bag

co
deployment. Air bags must function properly in the event of an
accident.
 Before installing, check the location of pipe, tank, electrical

.
cables and others.

ns
 Read and follow the instruction manual.
 Wiring location must not interfere driving, get in or out from car.
 Use electrical tape to insulate the ends of all wires, even if they
are not used. Proper insulation prevents arcs, shocks and fires.
io
 When installation is complete, test all vehicle electrical systems
to ensure they operate correctly, including lights, horn, brake
lights, and emergency flashers.
ut

 According to our sales policy, any problems caused by user’s

mistake, careless can not be guaranteed.
ol

 All steps of installation should be done by well-trained specialist.

-s

 During installation ignition key should be taken off and after all
installation finish connect power cable with interface for the last
Caution step.
ar

 Do not install the main unit in places where it ma be exposed to

dew condensation (around the air conditioning hose, etc), or in
locations where it may come in contact with water, high levels of
C

moisture, dust or oily smoke

 Install wiring in a manner in which cables will not come in contact
with metal parts. The wiring may be damaged by contact with
metal parts, resulting in fire and shocks. Avoid all contact with hot
surfaces when wiring the main unit. High temperatures may
damage wiring, causing shorts, arcing and fires.
 Kindly check all parts are in the box, when receiving the product, if
anything missing, inform to the supplier or manufacturer.

www.car-solutions.com
 Table of Contents

1. Specifications
1.1 Main Specifications 4
1.2 Features 5

m
1.3 System Diagram 6
1.4 Components 7

co
1.5 Exterior 9

2. Installation

.
2.1 Installation Diagram
2.2 Installation
ns 10
11
io
3. Settings
3.1 DIP Switch 13
ut

3.2 Remote Control 14

3.3 Car Model and Navi Model 15
16
ol

3.4 Factory Mode

3.5 DVD, DTV I-DRIVE input 19
3.6 Original Button Usage 21
-s

3.7 Rear Camera 22

3.8 Rear Parking Guidelines 24
ar

3.9 OSD 25
C

4. Trouble Shooting 27

www.car-solutions.com
1. Specifications
1.1 Main Specifications
1. Compatibility
Most of brand-new cars coming with CIC Navigation
Computer System including BMW 5 series

m
2. Product composition
Multimedia Interface * 1ea

co
3. MULTIMEDIA INTERFACE input spec.
3 * A/V input (external video input)

.
ns
1 * CVBS input (rear camera source input)
1 * RGB input (navigation system & HDMI)
1 * LCD input (car system input)
io
4. MULTIMEDIA INTERFACE output spec.
ut

1 * LCD output
ol

5. POWER spec.
input power : 8VDC ~ 18VDC
consumption power : 5 WATT
-s

6. Switch input mode

ar

- Input video skip function : able to select whether to

use the respective input video sources or not via DIP
C

switch.
- Able to change input modes via the remote control.
- Able to detect rear camera via CAN or rear lamp
cable.
- Able to change modes via an OEM Button

4
www.car-solutions.com
1. Specifications
1.2 Features
 Able to control NAVI, DVD, DTV function via Multimedia
Touch GUI

m
 Able to adjust external image (DVD, NAVI) display on
screen

co
 Improved Screen Display (user-oriented interface)

.
 Mode change through original button

ns
 Provide power cables to connect with rear camera
io
 Dynamic PAS(Parking assistance system)
ut
ol
-s
ar
C

5
www.car-solutions.com
 1. Specifications
1.3 System Diagram

Remote control Switch for source toggle

OEM Button (Can Signal)

m
co
NAVIGATION Input MCU
(Analog RGB)
HDMI Input
(RGB-IN2) DISPLAY
Car Installation

.
A/V 1 OEM LCD

A/V 2

A/V 3
VIDEO
CIRCUIT ns VIDEO MUX
io
CVBS
(Rear camera)
ut

Car Screen Input

(CAR MAIN BOARD) POWER A/V OUT
ol

CIRCUIT HEADREST
MONITOR
-s

Power Input Dip S/W Rear Camera Power

ar

(+8VDC ~ +18VDC) (+9VDC)

C

6
www.car-solutions.com
 1. Specifications
1.4 Components

m
TOUCH IN cable * 1ea
(HTOUCH0009)

co
LCD cable * 1ea
(HLCDCA0005)
Remote control * 1ea
(REMOTE0001)

.
ns
io
A/V cable * 1EA
(HAVCAB0002)
ut
ol
-s

Mode cable * 1EA

(HARETC0001) R-CAM POWER cable * 1EA
ar

(HARETC0002)
C

RGB cable * 1ea

TOUCH OUT cable * 1ea (HRGBCA0013)
IR cable * 1EA (HTOUCH0004)
(HIRCAB0002)

Modified POWER cable * 1EA

(HPOWER0012) , (HPOWER0021)

7
www.car-solutions.com
1. Specifications
1.4 Components

m
. co
6.5” Touch Panel
(TOUPAN0003) ns
io
ut
ol
-s
ar
C

8.8” Touch Panel

(TOULCD0011)

8
www.car-solutions.com
1. Specifications
1.5 Exterior

Dimension

m
Width 150.4mm
Length 99.4mm

co
⑭ ⑬⑫ ⑪ ⑩ ⑨ Height 2.3.2mm

① MODE

.
ns ② IR
③ POWER
io
④ TOUCH OUT
ut

⑤ REAR
⑥ RGB-IN HDMI
ol

⑦ RGB-IN NAVI
-s

⑧ AV IN/OUT
⑨ LCD-OUT
ar

⑩ LCD-IN
①② ③ ④ ⑤ ⑥ ⑦ ⑧
C

⑪ T/S-IN
⑫ TEST
⑬ LED
⑬ DIP S/W

9
www.car-solutions.com
 2. Installation
2.1 Installation Diagram

Connecting this to the spot which the original POWER & CAN cable was connected.

m
Original
Connecting the original POWER & CAN cable to this part. Monitor

co
Offered
Original LCD Cable LCD Cable

.
Control Box

ns
io
ut
ol
-s

Noise filter
Box
ar

AV1
AV2
AV3
AV/OUT
GND

REAR C
CAN
CAN

ACC

NAVI-VS
R DATA (red)
G DATA (green)
B DATA (blue)
SYNC
GND

IR-NAVI
IR-DVD
IR-DTV
REAR (9V OUT)
GND
C

Audio R
Audio L
Video

10
www.car-solutions.com
 2. Installation
2.2 Installation / Connection of Power cable

m
co
Connect

.
ns The original
power& CAN
io
Connection to the interface
NOISE FILTER BOX cable has to be
connected to this
ut

This has to be connected part.

to the spot located at the
back of the monitor which
ol

the original power & CAN

cable originally connected.
-s

Noise
filter box
ar

ACC
GND
CAN(H)
약 15cm

CAN(L)
C

Approximately 1M

11
www.car-solutions.com
2. Installation
2.2 Installation / Monitor and Interface connection

m
① See left picture, Remove

co
original LCD cable from
monitor and connect with
provided LCD cable.

.
ns
io
ut

② Connect the original LCD

cable with LCD-IN on the
ol

interface.
-s
ar
C

※ Precaution : Do not connect power cable with accessory

power, connect with backside of command or cigar jack.

12
www.car-solutions.com
3. Settings
3.1 DIP Switch ※ Example DIP S/W usage
- Use input mode : A/V2, A/V3
- Use original navigation
- External rear camera

▷DIP S/W : 1,2  ON (Hide INPUT MODE)

m
▷DIP S/W : 3  OFF (A/V2 display)
▷DIP S/W : 4  OFF (A/V3 display)

co
※ ON : DOWN / OFF : UP
Default : DIP S/W 8 OFF ▷DIP S/W : 5,6  OFF
▷DIP S/W : 7  ON (display external rear cam)

.
PIN Function ns
▷DIP S/W : 8  OFF
Dip S/W Selection
io
ON : RGB mode skip
1 Displaying RGB input
OFF : RGB mode display
ut
ON : A/V 1 mode skip
2 Displaying A/V 1
OFF : A/V1 mode display
ON : A/V 2 mode skip
ol

3 Displaying A/V 2
OFF : A/V2 mode display
ON : A/V 3 mode skip
-s

4 Displaying A/V 3
OFF : A/V3 mode display
ON : 7.2 inch
ar

5 Setup of monitor size

OFF : 10.2 inch

6 Select MINI model ON : Select MINI car

C

ON : CVBS4
7 Setup of rear camera use
OFF : MAIN
ON : By MUX (ON:DEFAULT)
8 Setting up display image
OFF : By Relay
※ Please make sure to disconnect the power cable of the interface and reconnect
the power cable again to apply the dip switch setting whenever changing DIP switch.
Otherwise, DIP switch setting will not be applied.
13
www.car-solutions.com
3. Settings
3.2 Remote Control

m
. co
ns
io
Key Function
ut

POWER & PIP Unavailable

ol

MENU Activating OSD menu

-s

OK Making a selection, changing image display

ar

▲ Moving upward
C

▼ Moving downward

Moving leftward
◀ (If you press this button 2 seconds long, you can access the factory
mode.)

Moving rightward
▶ (If you press this button 2 seconds long, you can reset all the
data about user environment.)

14
www.car-solutions.com
3. Settings
3.3 Car Model and Navi Model
FACTORY mode – Press ◀ button 2 seconds long on the remote control.
 Setup for car model Setup for navigation
Menu of FACTORY Menu of FACTORY
IMAGE NAVI MODEL IMAGE NAVI MODEL
PARK CAR MODEL PARK CAR MODEL

m
UTIL1 AVOUT SELECT UTIL1 AVOUT SELECT
UTIL2 HDMI SKIP UTIL2 HDMI SKIP
INFO FACTORY RESET INFO FACTORY RESET

co
MENU to Return SEL to Select/Save MENU to Return SEL to Select/Save

 UTIL1 - CAR MODEL  UTIL1 – NAVI MODEL

.
Selecting model of the car Select of the navigation Model

F10 : 5 Series 2009~2012

E90 2014Y : X1 2014~
ns
DEFAULT
PAPAGO(WVGA)
io
E90 : No use NAVIST OEM(WVGA)
GN-3000(WVGA)
ICUBE(WVGA)
ut

* Set pin#5 of DIP switch to the NAV-506TP(WVGA)

right size of the monitor after MYVI(WVGA)
WP9200(WVGA)
selecting model of the car.
ol

HDMI(WVGA)
(Refer to page9.) GI-8000N 3D(WVGA)
GI-5000A(WVGA)
-s

Menu of FACTORY
A-CLASS(WVGA)
IMAGE H-POSITION
PARK V-POSITION
KD-900(WVGA)
PAPAGO(WQVGA)
ar

UTIL H-SIZE(NAVI)
INFO LS-901(WQVGA)

* Go into FACTORY/ UTIL1 (as

C

MENU to Return SEL to Select/Save shown right) and adjust the

position and the size of the
 IMAGE navigation after setting the
Adjust navigation position and size definition of the navigation

H-POSITION : Move display horizontally

V-POSITION : Move display vertically
H-SIZE : Adjust navi size horizontally
15
www.car-solutions.com
3. Settings
3.4 FACTORY Mode
FACTORY mode – Press ◀ button 2 seconds long on the remote control.

Menu of FACTORY Menu of FACTORY

IMAGE NAVI MODEL IMAGE NAVI MODEL
PARK CAR MODEL PARK CAR MODEL

m
UTIL1 AVOUT SELECT UTIL1 AVOUT SELECT
UTIL2 HDMI SKIP UTIL2 HDMI SKIP
INFO FACTORY RESET INFO FACTORY RESET

co
MENU to Return SEL to Select/Save MENU to Return SEL to Select/Save

 UTIL1 – AVOUT SELECT  UTIL1 – HDMI SKIP

.
Selecting background sound After Selecting the use of HDMI mode
returning navigation or original
mode

DEFAULT : Selecting AV sound just

ns
ON / OFF
io
before changing navigation or
original mode from the AV mode
ut

AV 1~3 : Sound of the selected

AV source 1~3
ol

Menu of FACTORY
-s

IMAGE NAVI MODEL

PARK CAR MODEL
UTIL1 AVOUT SELECT
ar

UTIL2 HDMI SKIP

INFO FACTORY RESET
C

MENU to Return SEL to Select/Save

 UTIL1 - FACTORY RESET

- Reset

※ Long press the ▶ button

16
www.car-solutions.com
3. Settings
3.4 FACTORY Mode
FACTORY mode – Press ◀ button 2 seconds long on the remote control.

Menu of FACTORY Menu of FACTORY

IMAGE I-DRV REMOTE IMAGE I-DRV REMOTE
PARK I-DRV CONTROL PARK I-DRV CONTROL
UTIL1 IR MEMORY UTIL1 IR MEMORY

m
UTIL2 HANDLE KEY UTIL2 HANDLE KEY
INFO MEMORY KEY INFO MEMORY KEY
CALIBRATE CALIBRATE

co
MENU to Return SEL to Select/Save MENU to Return SEL to Select/Save

 UTIL2 - I_DRV REMOTE  UTIL2 - I_DRV CONTROL

Choose DTV and DVD model Selecting whether to use I_DRV

.
to be control I_DRV function function or not

• Select DVD model: Setting on

ns
ON / OFF
io
AV1 Mode A/V1 : Control DVD Remote control
• Select DTV model : Setting on UI
ut

A/V2 mode A/V2 : Control DTV Remote control

UI
ol
-s
ar
C

17
www.car-solutions.com
3. Settings
3.4 FACTORY Mode
FACTORY mode – Press ◀ button 2 seconds long on the remote control.
Menu of FACTORY Menu of FACTORY
IMAGE I-DRV REMOTE IMAGE I-DRV REMOTE
PARK I-DRV CONTROL PARK I-DRV CONTROL
UTIL1 IR MEMORY UTIL1 IR MEMORY
UTIL2 HANDLE KEY UTIL2 HANDLE KEY

m
INFO MEMORY KEY INFO MEMORY KEY
CALIBRATE CALIBRATE

co
MENU to Return SEL to Select/Save MENU to Return SEL to Select/Save

 UTIL2 – IR MEMORY  UTIL2 – HANDLE KEY

To register DVD, DTV remote control, Whether to use voice button

.
the remote control value must be
on handle for mode change
registered and can be control with
I-Drive
DVD(A/V1), DTV(A/V2) ns
ON / OFF
io
※ To use this function, in UTIL2-
I_DRV REMOTE select USER mode
(Connect IR of DVD / DTV to
ut

Remote control.
ol

Menu of FACTORY Menu of FACTORY

-s

IMAGE I-DRV REMOTE IMAGE I-DRV REMOTE

PARK I-DRV CONTROL PARK I-DRV CONTROL
UTIL1 IR MEMORY UTIL1 IR MEMORY
UTIL2 HANDLE KEY UTIL2 HANDLE KEY
ar

INFO MEMORY KEY INFO MEMORY KEY

CALIBRATE CALIBRATE

MENU to Return SEL to Select/Save MENU to Return SEL to Select/Save

C

 UTIL2 – MEMORY KEY  UTIL2 – CALIBRATE

Wheter to use car audio Touch Calibration
button #8 (mode change +
aux change) YES / NO

ON / OFF
18
www.car-solutions.com
3. Settings
3.5 DVD, DTV IR MEMORY input
Menu of FACTORY
IMAGE I-DRV REMOTE
PARK I-DRV CONTROL
UTIL1 IR MEMORY
UTIL2 HANDLE KEY

m
INFO MEMORY KEY
CALIBRATE

MENU to Return SEL to Select/Save

co
① First of all, press ◀ button on
remote controller 2 seconds ② Picture above shows DVD
long or press remote control button value

.
UP→DOWN→UP→MENU input, select menu you want
button in order to access
Factory mode. Choose IR
MEMORY on UTIL2.
ns
to save. (To register DVD
remote control button value,
select IR MEMORY – DTV and
io
follow below instructions.
In IR MEMORY, you can choose
ut

AV source of DTV and DVD you Example)

want to use. a. After select OK button on
OSD menu, press intended I-
ol

Drive button
b. Indicated part above will
-s

flicker, and press POWER on

DVD remote control.
(continue to next page)
ar
C

What is IR-MEMORY Mode?

Is to allow I-Drive and touch screen to control other DVD or DTV
(besides the existing,; for example : SANYO, NECVOX) by register
remote control value.

19
www.car-solutions.com
3. Settings
3.5 DVD, DTV I-DRIVE input

m
③ After register, select “SRC”

co
example) continued.. button in OSD menu. Then you
c. The values that you can see confirmation window
registered will appear as as shown above. At the

.
green text in the marked moment,
area on pressing the button.
And the values will be saved
automatically.
ns (If data is saved, DVD TYPE and
DTV TYPE will be changed to
“USER” automatically.)
io
d. Register remain buttons’
value in OSD menu like the If you see “SUCCESS” on screen,
the data is saved clearly and
ut

above-mentioned.
you can control DVD via touch
screen. BUT, you MUST change
ol

the option in FACTORY-UTIL2-

I_DRV REMOTE to “USER”.
-s

※ When touch the screen, you can control DVD, DTV using remote control UI
via touch screen or I-Drive
(6.5” monitor – Touch the middle of the screen,
ar

8.8”, 10.2” monitor – Touch the left side of the screen)

※ If touch the screen in DVD(A/V1), DTV(A/V2) mode, Can see remote control UI
C

If touch the screen in RGB(HDMI), A/V3 mode, Can see mode switching UI
- If you want to see mode switching UI in DVD, DTV mode, Select “SRC” button

20
www.car-solutions.com
 3. Settings
3.6 Original Button Usage

I-Drive Button(All models)

m
Mode Key Operation Function
Long Press Mode change

co
All
MENU
modes Short Press back to original image

Long Press Scan Channel

△

.
DMB Short Press Channel up

AV1
AV2
▽

▽
ns
Short Press

Long press
Channel down

Operate PIP Function

io
AV3
Reverse
▽ Long press Operate PIP Function
ut
Mode
ol
-s

Hot Key Function

ar

Mode Key Operation Function

All # 8 button located beside
Short Press Switch modes
Modes Radio button
C

21
www.car-solutions.com
3. Settings
3.7 Rear Camera

 Setting up the screen option of Rear Image

5 Series(F10) : Long Press I-Drive to set up

m
. co
ns
io
ut
ol

<Full Image of Rear Camera>

-s
ar
C

<Rear Camera +PDC >

22
www.car-solutions.com
3. Settings
3.7 Rear Camera
FACTORY mode – Press ◀ button 2 seconds long on the remote control.
※After installing rear camera : DIP S/W #7
must be put down (ON). Refer to page 9.
Menu of FACTORY

IMAGE PAS TYPE

m
PARK PAS SETUP
UTIL1 REAR TYPE
UTIL2 SAFE ENABLE
INFO RADAR ENABLE

co
MENU to Return SEL to Select/Save

.
 PARK

ns
PAS TYPE : Selecting Type of parking guide line
- NOT USED : Not use Parking guide line
io
- PAS ON : Selecting Dynamic Parking guide line
- PAS OFF : Selecting fixed Parking guide line
ut

PAS SETUP : Adjusting the position of the parking guide line (available in PARK SETUP->
V-POSITION, H-POSITION)
ol

REAR TYPE : Choose rear camera recognition

* LAMP - Detecting the rear view camera via rear lamp (Installer must connect
“Rear-C” cable of the power cable to the rear lamp of the car.)
-s

*CAN - Detecting the rear view camera by CAN signal (Installer must connect
“CAN” cable of the power cable to the “CAN” cable of the car.)
ar

SAFE ENABLE : If your car is connected with CAN cable and it is in ”ON” state, you can
NOT watch DVD or A/V except original image or navigation while
driving. At that time the screen use only main and navigation(default :
C

OFF)

CAMERA TYPE : When PDC mode, Selecting screen ratio

* OEM CAM : The car has original camera and install external camera
* EXT. CAM : The car doesn’t have original camera and install external camera

a. If you want to get to the FACTORY mode, set the gear as rear state and press “LEFT”
button 2 seconds long on the remote control or the keypad. (as shown left top)
23
www.car-solutions.com
3. Settings
3.8 Parking guide Lines
Go to Factory Menu, choose PAS SETUP, by using OK button change
H-POS → V-POS

 H-POS

m
. co
ns
In H-POSITION, use ◁, ▷ on remote control, to adjust parking
io
guideline left and right.
ut

 V-POS
ol
-s
ar
C

In V-POSITION use △, ▽on remote control, to adjust parking

guideline up and down.

24
www.car-solutions.com
3. Settings
3.9 OSD (On Screen Display) / Analog RGB Mode

m
co
 IMAGE  OSD
* BRIGHTNESS *LANGUAGE : Set OSD language

.
* CONTRAST (only support English and Chinese)
* SHARPNESS
ns* TRANS : Adjust OSD transparency
*H-POSITION : Move OSD horizontally
* V-POSITION : Move OSD vertically
io
ut
ol
-s
ar

 UTIL
C

* FACTORY RESET
: Factory reset only for OSD function
(unable reset video position)

25
www.car-solutions.com
3. Settings
3.9 OSD (On Screen Display) / Video Mode

m
co
 IMAGE  OSD
* BRIGHTNESS * LANGUAGE : Set OSD language
* CONTRAST (only support English and Chinese)

.
* SATURATION
* HUE
* SHARPNESS
ns * TRANS : Adjust OSD transparency
* H_POSITION : Move OSD horizontally
* V_POSITION : Move OSD vertically
io
ut
ol
-s
ar

 UTIL
* FACTORY RESET
: Factory reset only for OSD function
C

(unable reset video position)

26
www.car-solutions.com
4. Trouble Shooting
Q. I cannot change mode
A. Check connection of Ground cable and IR Cable.
Check LED lamp is on, if not check connection of POWER cable.

Q. All I got on the screen is black.

A. .Check second LED lamp of the interface is on, if not, check A/V sources

m
connected are working well.
(Second lamp indicates AV sources connected works well.) Check
interface connection has been done well.

co
Q. Displayed image color is not proper (too dark or unsuitable color)
A. Try to select “INITIAL” in OSD menu, if it does not work, inform to
manufacturer.

.
ns
Q. I cannot watch the rear camera on the screen
A. Set the DIP switch #7 as state “ON”.
io
Q. Set mode not appear
A. Check DIP Switch.
ut

Q. OEM image is not displayed.

A. Check interface’s LCD In/Out cable connection. If the status keeps on,
ol

inform to manufacturer.

Q. Screen only displays white color.

-s

A. Check LCD out cable is connected well, if this status keeps, inform to
manufacturer.
ar

Q. Show PIP function via handle button, and original screen appear half only.
A. This is not because of faulty interface, please check original monitor split
C

function settings.

Q. After connect CAN cable, set gear “R”, video doesn’t appear.
A. Go to “FACTORY MODE”and check “UTIL-Rear Select”. Change
“LAMP”settings to “CAN” with remote control.
※ LAMP : In case of connecting “Rear-C” wire of Power Cable to Rear
Lamp in vehicle.
It may not work on a camera with 12V
27
www.car-solutions.com