Scribd Logo
Upload

Welcome to Scribd!

  • 624 views

    PDS MAESTRO PRO FILLER 38810 en-GB PDF

    Uploaded by

    Mohamed Nouzer
    HEMPEL'S MAESTRO PRO FILLER 38810 is an acrylic-based filler intended for interior use on walls, ceilings, and other surfaces. It has good smoothing properties and can be overcoated with water-borne or solvent-borne coatings. The filler comes in off-white and is intended to fill cracks, blowholes, and other surface irregularities to a thickness of 100 microns wet. It dries to touch in 4 hours at 20°C and has a recoat window of 6 hours minimum to an unlimited maximum time. Proper surface preparation and priming is required before application.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    PDS MAESTRO PRO FILLER 38810 en-GB PDF

    Uploaded by

    Mohamed Nouzer
    624 views1 page
    HEMPEL'S MAESTRO PRO FILLER 38810 is an acrylic-based filler intended for interior use on walls, ceilings, and other surfaces. It has good smoothing properties and can be overcoated with water-borne or solvent-borne coatings. The filler comes in off-white and is intended to fill cracks, blowholes, and other surface irregularities to a thickness of 100 microns wet. It dries to touch in 4 hours at 20°C and has a recoat window of 6 hours minimum to an unlimited maximum time. Proper surface preparation and priming is required before application.

    Original Title

    PDS MAESTRO PRO FILLER 38810 en-GB.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    HEMPEL'S MAESTRO PRO FILLER 38810 is an acrylic-based filler intended for interior use on walls, ceilings, and other surfaces. It has good smoothing properties and can be overcoated with water-borne or solvent-borne coatings. The filler comes in off-white and is intended to fill cracks, blowholes, and other surface irregularities to a thickness of 100 microns wet. It dries to touch in 4 hours at 20°C and has a recoat window of 6 hours minimum to an unlimited maximum time. Proper surface preparation and priming is required before application.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    624 views1 page

    PDS MAESTRO PRO FILLER 38810 en-GB PDF

    Uploaded by

    Mohamed Nouzer
    HEMPEL'S MAESTRO PRO FILLER 38810 is an acrylic-based filler intended for interior use on walls, ceilings, and other surfaces. It has good smoothing properties and can be overcoated with water-borne or solvent-borne coatings. The filler comes in off-white and is intended to fill cracks, blowholes, and other surface irregularities to a thickness of 100 microns wet. It dries to touch in 4 hours at 20°C and has a recoat window of 6 hours minimum to an unlimited maximum time. Proper surface preparation and priming is required before application.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Product Data Sheet

    HEMPEL’S MAESTRO PRO FILLER 38810

    Description: HEMPEL’S MAESTRO PRO FILLER 38810 is water-borne, acrylic-based filler with good
    smoothing properties. Recoat able with water-borne or solvent-borne coatings.

    Recommended use: Interior; Walls, ceilings, render partitions, etc.

    Substrates: Concrete, masonry, cement rendering, plaster, gypsum etc.

    Availability: 3.79 Litres and 17.6 Litres Pack sizes

    Physical constants:

    Colours/shade Nos.: Off White/11630 (see REMARKS overleaf)


    Finish: Flat
    Volume solids, %: 49 ± 1
    Theoretical spreading rate: 4.2 m²/litre –100 micron
    Flash point: > 93°C
    Specific gravity: 1.7 kg/litre
    Dry to touch: 4 hours at 20°C/68°F
    The physical constants stated are nominal data according to the Hempel Group's approved formulas.

    Application details:

    Application method: Spatula, filling knife, steel trowel


    Cleaning of tools: Fresh Water
    Indicated film thickness, dry: 100 micron (see REMARKS overleaf)
    Indicated film thickness, wet: 210 micron
    Overcoat interval, min: 6 hours (20°C/68°F)
    Overcoat interval, max: None
    See REMARKS overleaf

    Safety: Handle with care. Before and during use, observe all safety labels on packaging and
    paint containers, consult Hempel Material Safety Data Sheets and follow all local
    or national safety regulations.

    Surface preparation: The surface should be stable, firm, dry and free of dust, sand, loose old paint, laitance, dirt,
    grease and oil. It is recommended to apply a primer/sealer prior to the specified filling
    procedure. Touchup with Maestro Pro Sealer 09810 on areas repaired with filler is
    recommended prior to application of topcoats.

    Remarks: Use only where application and drying can proceed at temperatures above 5°C and relative
    humidity below 85%. The dry film thickness will be determined by the depth of crevices,
    blowholes or the degree of surface irregularities. The practical spreading rate will alter
    accordingly. MAESTRO PRO FILLER 38810 is not recommended for structural cracks .Avoid
    application of excessive dry film thickness. Drying data given is on the assumption that proper
    ventilation is provided.

    Note: HEMPEL’S MAESTRO PRO FILLER 38810 is for professional use only.

    Issued by: Hempel Paints Emirates LLC

    This Product Data Sheet supersedes those previously issued.

    For explanations, definitions and scope, see “Explanatory Notes” available on hempel.com. Data, specifications, directions and recommendations given in this data sheet
    represent only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual
    conditions of any intended use of the Products herein must be determined exclusively by the Buyer and/or User.

    The Products are supplied and all technical assistance is given subject to Hempel's general conditions of sales, delivery and service, unless otherwise expressly agreed in
    writing. The Manufacturer and Seller disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence, except as expressed
    in said general conditions for all results, injury or direct or consequential losses or damages arising from the use of the Products as recommended above, on the overleaf
    or otherwise. Product data are subject to change without notice and become void five years from the date of issue.

    Issued: June 2016 Page: 1/1

    You might also like